IO::Compress::Gzip(3) User Contributed Perl DocumentationIO::Compress::Gzip(3)
NAME
IO::Compress::Gzip - Write RFC 1952 files/buffers
SYNOPSIS
use IO::Compress::Gzip qw(gzip $GzipError) ;
my $status = gzip $input => $output [,OPTS]
or die "gzip failed: $GzipError\n";
my $z = new IO::Compress::Gzip $output [,OPTS]
or die "gzip failed: $GzipError\n";
$z->print($string);
$z->printf($format, $string);
$z->write($string);
$z->syswrite($string [, $length, $offset]);
$z->flush();
$z->tell();
$z->eof();
$z->seek($position, $whence);
$z->binmode();
$z->fileno();
$z->opened();
$z->autoflush();
$z->input_line_number();
$z->newStream( [OPTS] );
$z->deflateParams();
$z->close() ;
$GzipError ;
# IO::File mode
print $z $string;
printf $z $format, $string;
tell $z
eof $z
seek $z, $position, $whence
binmode $z
fileno $z
close $z ;
DESCRIPTION
This module provides a Perl interface that allows writing compressed
data to files or buffer as defined in RFC 1952.
All the gzip headers defined in RFC 1952 can be created using this
module.
For reading RFC 1952 files/buffers, see the companion module
IO::Uncompress::Gunzip.
Functional Interface
A top-level function, "gzip", is provided to carry out "one-shot"
compression between buffers and/or files. For finer control over the
compression process, see the "OO Interface" section.
use IO::Compress::Gzip qw(gzip $GzipError) ;
gzip $input_filename_or_reference => $output_filename_or_reference [,OPTS]
or die "gzip failed: $GzipError\n";
The functional interface needs Perl5.005 or better.
gzip $input_filename_or_reference => $output_filename_or_reference [, OPTS]
"gzip" expects at least two parameters, $input_filename_or_reference
and $output_filename_or_reference.
The $input_filename_or_reference parameter
The parameter, $input_filename_or_reference, is used to define the
source of the uncompressed data.
It can take one of the following forms:
A filename
If the <$input_filename_or_reference> parameter is a simple
scalar, it is assumed to be a filename. This file will be opened
for reading and the input data will be read from it.
A filehandle
If the $input_filename_or_reference parameter is a filehandle, the
input data will be read from it. The string '-' can be used as an
alias for standard input.
A scalar reference
If $input_filename_or_reference is a scalar reference, the input
data will be read from $$input_filename_or_reference.
An array reference
If $input_filename_or_reference is an array reference, each
element in the array must be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only contains
valid filenames before any data is compressed.
An Input FileGlob string
If $input_filename_or_reference is a string that is delimited by
the characters "<" and ">" "gzip" will assume that it is an input
fileglob string. The input is the list of files that match the
fileglob.
See File::GlobMapper for more details.
If the $input_filename_or_reference parameter is any other type,
"undef" will be returned.
In addition, if $input_filename_or_reference is a simple filename, the
default values for the "Name" and "Time" options will be sourced from
that file.
If you do not want to use these defaults they can be overridden by
explicitly setting the "Name" and "Time" options or by setting the
"Minimal" parameter.
The $output_filename_or_reference parameter
The parameter $output_filename_or_reference is used to control the
destination of the compressed data. This parameter can take one of
these forms.
A filename
If the $output_filename_or_reference parameter is a simple scalar,
it is assumed to be a filename. This file will be opened for
writing and the compressed data will be written to it.
A filehandle
If the $output_filename_or_reference parameter is a filehandle,
the compressed data will be written to it. The string '-' can be
used as an alias for standard output.
A scalar reference
If $output_filename_or_reference is a scalar reference, the
compressed data will be stored in $$output_filename_or_reference.
An Array Reference
If $output_filename_or_reference is an array reference, the
compressed data will be pushed onto the array.
An Output FileGlob
If $output_filename_or_reference is a string that is delimited by
the characters "<" and ">" "gzip" will assume that it is an output
fileglob string. The output is the list of files that match the
fileglob.
When $output_filename_or_reference is an fileglob string,
$input_filename_or_reference must also be a fileglob string.
Anything else is an error.
See File::GlobMapper for more details.
If the $output_filename_or_reference parameter is any other type,
"undef" will be returned.
Notes
When $input_filename_or_reference maps to multiple files/buffers and
$output_filename_or_reference is a single file/buffer the input
files/buffers will be stored in $output_filename_or_reference as a
concatenated series of compressed data streams.
Optional Parameters
Unless specified below, the optional parameters for "gzip", "OPTS", are
the same as those used with the OO interface defined in the
"Constructor Options" section below.
"AutoClose => 0|1"
This option applies to any input or output data streams to "gzip"
that are filehandles.
If "AutoClose" is specified, and the value is true, it will result
in all input and/or output filehandles being closed once "gzip"
has completed.
This parameter defaults to 0.
"BinModeIn => 0|1"
When reading from a file or filehandle, set "binmode" before
reading.
Defaults to 0.
"Append => 0|1"
The behaviour of this option is dependent on the type of output
data stream.
o A Buffer
If "Append" is enabled, all compressed data will be append to
the end of the output buffer. Otherwise the output buffer
will be cleared before any compressed data is written to it.
o A Filename
If "Append" is enabled, the file will be opened in append
mode. Otherwise the contents of the file, if any, will be
truncated before any compressed data is written to it.
o A Filehandle
If "Append" is enabled, the filehandle will be positioned to
the end of the file via a call to "seek" before any
compressed data is written to it. Otherwise the file pointer
will not be moved.
When "Append" is specified, and set to true, it will append all
compressed data to the output data stream.
So when the output is a filehandle it will carry out a seek to the
eof before writing any compressed data. If the output is a
filename, it will be opened for appending. If the output is a
buffer, all compressed data will be appended to the existing
buffer.
Conversely when "Append" is not specified, or it is present and is
set to false, it will operate as follows.
When the output is a filename, it will truncate the contents of
the file before writing any compressed data. If the output is a
filehandle its position will not be changed. If the output is a
buffer, it will be wiped before any compressed data is output.
Defaults to 0.
Examples
To read the contents of the file "file1.txt" and write the compressed
data to the file "file1.txt.gz".
use strict ;
use warnings ;
use IO::Compress::Gzip qw(gzip $GzipError) ;
my $input = "file1.txt";
gzip $input => "$input.gz"
or die "gzip failed: $GzipError\n";
To read from an existing Perl filehandle, $input, and write the
compressed data to a buffer, $buffer.
use strict ;
use warnings ;
use IO::Compress::Gzip qw(gzip $GzipError) ;
use IO::File ;
my $input = new IO::File "<file1.txt"
or die "Cannot open 'file1.txt': $!\n" ;
my $buffer ;
gzip $input => \$buffer
or die "gzip failed: $GzipError\n";
To compress all files in the directory "/my/home" that match "*.txt"
and store the compressed data in the same directory
use strict ;
use warnings ;
use IO::Compress::Gzip qw(gzip $GzipError) ;
gzip '</my/home/*.txt>' => '<*.gz>'
or die "gzip failed: $GzipError\n";
and if you want to compress each file one at a time, this will do the
trick
use strict ;
use warnings ;
use IO::Compress::Gzip qw(gzip $GzipError) ;
for my $input ( glob "/my/home/*.txt" )
{
my $output = "$input.gz" ;
gzip $input => $output
or die "Error compressing '$input': $GzipError\n";
}
OO Interface
Constructor
The format of the constructor for "IO::Compress::Gzip" is shown below
my $z = new IO::Compress::Gzip $output [,OPTS]
or die "IO::Compress::Gzip failed: $GzipError\n";
It returns an "IO::Compress::Gzip" object on success and undef on
failure. The variable $GzipError will contain an error message on
failure.
If you are running Perl 5.005 or better the object, $z, returned from
IO::Compress::Gzip can be used exactly like an IO::File filehandle.
This means that all normal output file operations can be carried out
with $z. For example, to write to a compressed file/buffer you can use
either of these forms
$z->print("hello world\n");
print $z "hello world\n";
The mandatory parameter $output is used to control the destination of
the compressed data. This parameter can take one of these forms.
A filename
If the $output parameter is a simple scalar, it is assumed to be a
filename. This file will be opened for writing and the compressed
data will be written to it.
A filehandle
If the $output parameter is a filehandle, the compressed data will
be written to it. The string '-' can be used as an alias for
standard output.
A scalar reference
If $output is a scalar reference, the compressed data will be
stored in $$output.
If the $output parameter is any other type, "IO::Compress::Gzip"::new
will return undef.
Constructor Options
"OPTS" is any combination of the following options:
"AutoClose => 0|1"
This option is only valid when the $output parameter is a
filehandle. If specified, and the value is true, it will result in
the $output being closed once either the "close" method is called
or the "IO::Compress::Gzip" object is destroyed.
This parameter defaults to 0.
"Append => 0|1"
Opens $output in append mode.
The behaviour of this option is dependent on the type of $output.
o A Buffer
If $output is a buffer and "Append" is enabled, all
compressed data will be append to the end of $output.
Otherwise $output will be cleared before any data is written
to it.
o A Filename
If $output is a filename and "Append" is enabled, the file
will be opened in append mode. Otherwise the contents of the
file, if any, will be truncated before any compressed data is
written to it.
o A Filehandle
If $output is a filehandle, the file pointer will be
positioned to the end of the file via a call to "seek" before
any compressed data is written to it. Otherwise the file
pointer will not be moved.
This parameter defaults to 0.
"Merge => 0|1"
This option is used to compress input data and append it to an
existing compressed data stream in $output. The end result is a
single compressed data stream stored in $output.
It is a fatal error to attempt to use this option when $output is
not an RFC 1952 data stream.
There are a number of other limitations with the "Merge" option:
1. This module needs to have been built with zlib 1.2.1 or
better to work. A fatal error will be thrown if "Merge" is
used with an older version of zlib.
2. If $output is a file or a filehandle, it must be seekable.
This parameter defaults to 0.
-Level
Defines the compression level used by zlib. The value should
either be a number between 0 and 9 (0 means no compression and 9
is maximum compression), or one of the symbolic constants defined
below.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
The default is Z_DEFAULT_COMPRESSION.
Note, these constants are not imported by "IO::Compress::Gzip" by
default.
use IO::Compress::Gzip qw(:strategy);
use IO::Compress::Gzip qw(:constants);
use IO::Compress::Gzip qw(:all);
-Strategy
Defines the strategy used to tune the compression. Use one of the
symbolic constants defined below.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
The default is Z_DEFAULT_STRATEGY.
"Minimal => 0|1"
If specified, this option will force the creation of the smallest
possible compliant gzip header (which is exactly 10 bytes long) as
defined in RFC 1952.
See the section titled "Compliance" in RFC 1952 for a definition
of the values used for the fields in the gzip header.
All other parameters that control the content of the gzip header
will be ignored if this parameter is set to 1.
This parameter defaults to 0.
"Comment => $comment"
Stores the contents of $comment in the COMMENT field in the gzip
header. By default, no comment field is written to the gzip file.
If the "-Strict" option is enabled, the comment can only consist
of ISO 8859-1 characters plus line feed.
If the "-Strict" option is disabled, the comment field can contain
any character except NULL. If any null characters are present, the
field will be truncated at the first NULL.
"Name => $string"
Stores the contents of $string in the gzip NAME header field. If
"Name" is not specified, no gzip NAME field will be created.
If the "-Strict" option is enabled, $string can only consist of
ISO 8859-1 characters.
If "-Strict" is disabled, then $string can contain any character
except NULL. If any null characters are present, the field will be
truncated at the first NULL.
"Time => $number"
Sets the MTIME field in the gzip header to $number.
This field defaults to the time the "IO::Compress::Gzip" object
was created if this option is not specified.
"TextFlag => 0|1"
This parameter controls the setting of the FLG.FTEXT bit in the
gzip header. It is used to signal that the data stored in the gzip
file/buffer is probably text.
The default is 0.
"HeaderCRC => 0|1"
When true this parameter will set the FLG.FHCRC bit to 1 in the
gzip header and set the CRC16 header field to the CRC of the
complete gzip header except the CRC16 field itself.
Note that gzip files created with the "HeaderCRC" flag set to 1
cannot be read by most, if not all, of the standard gunzip
utilities, most notably gzip version 1.2.4. You should therefore
avoid using this option if you want to maximize the portability of
your gzip files.
This parameter defaults to 0.
"OS_Code => $value"
Stores $value in the gzip OS header field. A number between 0 and
255 is valid.
If not specified, this parameter defaults to the OS code of the
Operating System this module was built on. The value 3 is used as
a catch-all for all Unix variants and unknown Operating Systems.
"ExtraField => $data"
This parameter allows additional metadata to be stored in the
ExtraField in the gzip header. An RFC 1952 compliant ExtraField
consists of zero or more subfields. Each subfield consists of a
two byte header followed by the subfield data.
The list of subfields can be supplied in any of the following
formats
-ExtraField => [$id1, $data1,
$id2, $data2,
...
]
-ExtraField => [ [$id1 => $data1],
[$id2 => $data2],
...
]
-ExtraField => { $id1 => $data1,
$id2 => $data2,
...
}
Where $id1, $id2 are two byte subfield ID's. The second byte of
the ID cannot be 0, unless the "Strict" option has been disabled.
If you use the hash syntax, you have no control over the order in
which the ExtraSubFields are stored, plus you cannot have
SubFields with duplicate ID.
Alternatively the list of subfields can by supplied as a scalar,
thus
-ExtraField => $rawdata
If you use the raw format, and the "Strict" option is enabled,
"IO::Compress::Gzip" will check that $rawdata consists of zero or
more conformant sub-fields. When "Strict" is disabled, $rawdata
can consist of any arbitrary byte stream.
The maximum size of the Extra Field 65535 bytes.
"ExtraFlags => $value"
Sets the XFL byte in the gzip header to $value.
If this option is not present, the value stored in XFL field will
be determined by the setting of the "Level" option.
If "Level => Z_BEST_SPEED" has been specified then XFL is set to
2. If "Level => Z_BEST_COMPRESSION" has been specified then XFL
is set to 4. Otherwise XFL is set to 0.
"Strict => 0|1"
"Strict" will optionally police the values supplied with other
options to ensure they are compliant with RFC1952.
This option is enabled by default.
If "Strict" is enabled the following behaviour will be policed:
o The value supplied with the "Name" option can only contain
ISO 8859-1 characters.
o The value supplied with the "Comment" option can only contain
ISO 8859-1 characters plus line-feed.
o The values supplied with the "-Name" and "-Comment" options
cannot contain multiple embedded nulls.
o If an "ExtraField" option is specified and it is a simple
scalar, it must conform to the sub-field structure as defined
in RFC 1952.
o If an "ExtraField" option is specified the second byte of the
ID will be checked in each subfield to ensure that it does
not contain the reserved value 0x00.
When "Strict" is disabled the following behaviour will be policed:
o The value supplied with "-Name" option can contain any
character except NULL.
o The value supplied with "-Comment" option can contain any
character except NULL.
o The values supplied with the "-Name" and "-Comment" options
can contain multiple embedded nulls. The string written to
the gzip header will consist of the characters up to, but not
including, the first embedded NULL.
o If an "ExtraField" option is specified and it is a simple
scalar, the structure will not be checked. The only error is
if the length is too big.
o The ID header in an "ExtraField" sub-field can consist of any
two bytes.
Examples
TODO
Methods
print
Usage is
$z->print($data)
print $z $data
Compresses and outputs the contents of the $data parameter. This has
the same behaviour as the "print" built-in.
Returns true if successful.
printf
Usage is
$z->printf($format, $data)
printf $z $format, $data
Compresses and outputs the contents of the $data parameter.
Returns true if successful.
syswrite
Usage is
$z->syswrite $data
$z->syswrite $data, $length
$z->syswrite $data, $length, $offset
Compresses and outputs the contents of the $data parameter.
Returns the number of uncompressed bytes written, or "undef" if
unsuccessful.
write
Usage is
$z->write $data
$z->write $data, $length
$z->write $data, $length, $offset
Compresses and outputs the contents of the $data parameter.
Returns the number of uncompressed bytes written, or "undef" if
unsuccessful.
flush
Usage is
$z->flush;
$z->flush($flush_type);
Flushes any pending compressed data to the output file/buffer.
This method takes an optional parameter, $flush_type, that controls how
the flushing will be carried out. By default the $flush_type used is
"Z_FINISH". Other valid values for $flush_type are "Z_NO_FLUSH",
"Z_SYNC_FLUSH", "Z_FULL_FLUSH" and "Z_BLOCK". It is strongly
recommended that you only set the "flush_type" parameter if you fully
understand the implications of what it does - overuse of "flush" can
seriously degrade the level of compression achieved. See the "zlib"
documentation for details.
Returns true on success.
tell
Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
eof
Usage is
$z->eof();
eof($z);
Returns true if the "close" method has been called.
seek
$z->seek($position, $whence);
seek($z, $position, $whence);
Provides a sub-set of the "seek" functionality, with the restriction
that it is only legal to seek forward in the output file/buffer. It is
a fatal error to attempt to seek backward.
Empty parts of the file/buffer will have NULL (0x00) bytes written to
them.
The $whence parameter takes one the usual values, namely SEEK_SET,
SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
binmode
Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
opened
$z->opened()
Returns true if the object currently refers to a opened file/buffer.
autoflush
my $prev = $z->autoflush()
my $prev = $z->autoflush(EXPR)
If the $z object is associated with a file or a filehandle, this method
returns the current autoflush setting for the underlying filehandle. If
"EXPR" is present, and is non-zero, it will enable flushing after every
write/print operation.
If $z is associated with a buffer, this method has no effect and always
returns "undef".
Note that the special variable $| cannot be used to set or retrieve the
autoflush setting.
input_line_number
$z->input_line_number()
$z->input_line_number(EXPR)
This method always returns "undef" when compressing.
fileno
$z->fileno()
fileno($z)
If the $z object is associated with a file or a filehandle, "fileno"
will return the underlying file descriptor. Once the "close" method is
called "fileno" will return "undef".
If the $z object is associated with a buffer, this method will return
"undef".
close
$z->close() ;
close $z ;
Flushes any pending compressed data and then closes the output
file/buffer.
For most versions of Perl this method will be automatically invoked if
the IO::Compress::Gzip object is destroyed (either explicitly or by the
variable with the reference to the object going out of scope). The
exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In these
cases, the "close" method will be called automatically, but not until
global destruction of all live objects when the program is terminating.
Therefore, if you want your scripts to be able to run on all versions
of Perl, you should call "close" explicitly and not rely on automatic
closing.
Returns true on success, otherwise 0.
If the "AutoClose" option has been enabled when the IO::Compress::Gzip
object was created, and the object is associated with a file, the
underlying file will also be closed.
newStream([OPTS])
Usage is
$z->newStream( [OPTS] )
Closes the current compressed data stream and starts a new one.
OPTS consists of any of the options that are available when creating
the $z object.
See the "Constructor Options" section for more details.
deflateParams
Usage is
$z->deflateParams
TODO
Importing
A number of symbolic constants are required by some methods in
"IO::Compress::Gzip". None are imported by default.
:all Imports "gzip", $GzipError and all symbolic constants that can be
used by "IO::Compress::Gzip". Same as doing this
use IO::Compress::Gzip qw(gzip $GzipError :constants) ;
:constants
Import all symbolic constants. Same as doing this
use IO::Compress::Gzip qw(:flush :level :strategy) ;
:flush
These symbolic constants are used by the "flush" method.
Z_NO_FLUSH
Z_PARTIAL_FLUSH
Z_SYNC_FLUSH
Z_FULL_FLUSH
Z_FINISH
Z_BLOCK
:level
These symbolic constants are used by the "Level" option in the
constructor.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
:strategy
These symbolic constants are used by the "Strategy" option in the
constructor.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
EXAMPLES
Apache::GZip Revisited
See IO::Compress::FAQ
Working with Net::FTP
See IO::Compress::FAQ
SEE ALSO
Compress::Zlib, IO::Uncompress::Gunzip, IO::Compress::Deflate,
IO::Uncompress::Inflate, IO::Compress::RawDeflate,
IO::Uncompress::RawInflate, IO::Compress::Bzip2,
IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma,
IO::Compress::Xz, IO::Uncompress::UnXz, IO::Compress::Lzop,
IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf,
IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress
IO::Compress::FAQ
File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib
For RFC 1950, 1951 and 1952 see
<http://www.faqs.org/rfcs/rfc1950.html>;,
<http://www.faqs.org/rfcs/rfc1951.html>; and
<http://www.faqs.org/rfcs/rfc1952.html>;
The zlib compression library was written by Jean-loup Gailly
"gzip AT prep.edu" and Mark Adler "madler AT alumni.edu".
The primary site for the zlib compression library is
<http://www.zlib.org>;.
The primary site for gzip is <http://www.gzip.org>;.
AUTHOR
This module was written by Paul Marquess, "pmqs AT cpan.org".
MODIFICATION HISTORY
See the Changes file.
COPYRIGHT AND LICENSE
Copyright (c) 2005-2018 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
perl v5.26.3 2018-04-05 IO::Compress::Gzip(3)
Linux-Distributionen
Huschi als Linux-Admin