IO::Compress::RawDeflaUser)Contributed Perl DocumenIO::Compress::RawDeflate(3)
NAME
IO::Compress::RawDeflate - Write RFC 1951 files/buffers
SYNOPSIS
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
my $status = rawdeflate $input => $output [,OPTS]
or die "rawdeflate failed: $RawDeflateError\n";
my $z = new IO::Compress::RawDeflate $output [,OPTS]
or die "rawdeflate failed: $RawDeflateError\n";
$z->print($string);
$z->printf($format, $string);
$z->write($string);
$z->syswrite($string [, $length, $offset]);
$z->flush();
$z->tell();
$z->eof();
$z->seek($position, $whence);
$z->binmode();
$z->fileno();
$z->opened();
$z->autoflush();
$z->input_line_number();
$z->newStream( [OPTS] );
$z->deflateParams();
$z->close() ;
$RawDeflateError ;
# IO::File mode
print $z $string;
printf $z $format, $string;
tell $z
eof $z
seek $z, $position, $whence
binmode $z
fileno $z
close $z ;
DESCRIPTION
This module provides a Perl interface that allows writing compressed
data to files or buffer as defined in RFC 1951.
Note that RFC 1951 data is not a good choice of compression format to
use in isolation, especially if you want to auto-detect it.
For reading RFC 1951 files/buffers, see the companion module
IO::Uncompress::RawInflate.
Functional Interface
A top-level function, "rawdeflate", is provided to carry out "one-shot"
compression between buffers and/or files. For finer control over the
compression process, see the "OO Interface" section.
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
rawdeflate $input_filename_or_reference => $output_filename_or_reference [,OPTS]
or die "rawdeflate failed: $RawDeflateError\n";
The functional interface needs Perl5.005 or better.
rawdeflate $input_filename_or_reference => $output_filename_or_reference [,
OPTS]
"rawdeflate" expects at least two parameters,
$input_filename_or_reference and $output_filename_or_reference.
The $input_filename_or_reference parameter
The parameter, $input_filename_or_reference, is used to define the
source of the uncompressed data.
It can take one of the following forms:
A filename
If the <$input_filename_or_reference> parameter is a simple
scalar, it is assumed to be a filename. This file will be opened
for reading and the input data will be read from it.
A filehandle
If the $input_filename_or_reference parameter is a filehandle, the
input data will be read from it. The string '-' can be used as an
alias for standard input.
A scalar reference
If $input_filename_or_reference is a scalar reference, the input
data will be read from $$input_filename_or_reference.
An array reference
If $input_filename_or_reference is an array reference, each
element in the array must be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only contains
valid filenames before any data is compressed.
An Input FileGlob string
If $input_filename_or_reference is a string that is delimited by
the characters "<" and ">" "rawdeflate" will assume that it is an
input fileglob string. The input is the list of files that match
the fileglob.
See File::GlobMapper for more details.
If the $input_filename_or_reference parameter is any other type,
"undef" will be returned.
The $output_filename_or_reference parameter
The parameter $output_filename_or_reference is used to control the
destination of the compressed data. This parameter can take one of
these forms.
A filename
If the $output_filename_or_reference parameter is a simple scalar,
it is assumed to be a filename. This file will be opened for
writing and the compressed data will be written to it.
A filehandle
If the $output_filename_or_reference parameter is a filehandle,
the compressed data will be written to it. The string '-' can be
used as an alias for standard output.
A scalar reference
If $output_filename_or_reference is a scalar reference, the
compressed data will be stored in $$output_filename_or_reference.
An Array Reference
If $output_filename_or_reference is an array reference, the
compressed data will be pushed onto the array.
An Output FileGlob
If $output_filename_or_reference is a string that is delimited by
the characters "<" and ">" "rawdeflate" will assume that it is an
output fileglob string. The output is the list of files that match
the fileglob.
When $output_filename_or_reference is an fileglob string,
$input_filename_or_reference must also be a fileglob string.
Anything else is an error.
See File::GlobMapper for more details.
If the $output_filename_or_reference parameter is any other type,
"undef" will be returned.
Notes
When $input_filename_or_reference maps to multiple files/buffers and
$output_filename_or_reference is a single file/buffer the input
files/buffers will be stored in $output_filename_or_reference as a
concatenated series of compressed data streams.
Optional Parameters
Unless specified below, the optional parameters for "rawdeflate",
"OPTS", are the same as those used with the OO interface defined in the
"Constructor Options" section below.
"AutoClose => 0|1"
This option applies to any input or output data streams to
"rawdeflate" that are filehandles.
If "AutoClose" is specified, and the value is true, it will result
in all input and/or output filehandles being closed once
"rawdeflate" has completed.
This parameter defaults to 0.
"BinModeIn => 0|1"
When reading from a file or filehandle, set "binmode" before
reading.
Defaults to 0.
"Append => 0|1"
The behaviour of this option is dependent on the type of output
data stream.
o A Buffer
If "Append" is enabled, all compressed data will be append to
the end of the output buffer. Otherwise the output buffer
will be cleared before any compressed data is written to it.
o A Filename
If "Append" is enabled, the file will be opened in append
mode. Otherwise the contents of the file, if any, will be
truncated before any compressed data is written to it.
o A Filehandle
If "Append" is enabled, the filehandle will be positioned to
the end of the file via a call to "seek" before any
compressed data is written to it. Otherwise the file pointer
will not be moved.
When "Append" is specified, and set to true, it will append all
compressed data to the output data stream.
So when the output is a filehandle it will carry out a seek to the
eof before writing any compressed data. If the output is a
filename, it will be opened for appending. If the output is a
buffer, all compressed data will be appended to the existing
buffer.
Conversely when "Append" is not specified, or it is present and is
set to false, it will operate as follows.
When the output is a filename, it will truncate the contents of
the file before writing any compressed data. If the output is a
filehandle its position will not be changed. If the output is a
buffer, it will be wiped before any compressed data is output.
Defaults to 0.
Examples
To read the contents of the file "file1.txt" and write the compressed
data to the file "file1.txt.1951".
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
my $input = "file1.txt";
rawdeflate $input => "$input.1951"
or die "rawdeflate failed: $RawDeflateError\n";
To read from an existing Perl filehandle, $input, and write the
compressed data to a buffer, $buffer.
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
use IO::File ;
my $input = new IO::File "<file1.txt"
or die "Cannot open 'file1.txt': $!\n" ;
my $buffer ;
rawdeflate $input => \$buffer
or die "rawdeflate failed: $RawDeflateError\n";
To compress all files in the directory "/my/home" that match "*.txt"
and store the compressed data in the same directory
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
rawdeflate '</my/home/*.txt>' => '<*.1951>'
or die "rawdeflate failed: $RawDeflateError\n";
and if you want to compress each file one at a time, this will do the
trick
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
for my $input ( glob "/my/home/*.txt" )
{
my $output = "$input.1951" ;
rawdeflate $input => $output
or die "Error compressing '$input': $RawDeflateError\n";
}
OO Interface
Constructor
The format of the constructor for "IO::Compress::RawDeflate" is shown
below
my $z = new IO::Compress::RawDeflate $output [,OPTS]
or die "IO::Compress::RawDeflate failed: $RawDeflateError\n";
It returns an "IO::Compress::RawDeflate" object on success and undef on
failure. The variable $RawDeflateError will contain an error message
on failure.
If you are running Perl 5.005 or better the object, $z, returned from
IO::Compress::RawDeflate can be used exactly like an IO::File
filehandle. This means that all normal output file operations can be
carried out with $z. For example, to write to a compressed file/buffer
you can use either of these forms
$z->print("hello world\n");
print $z "hello world\n";
The mandatory parameter $output is used to control the destination of
the compressed data. This parameter can take one of these forms.
A filename
If the $output parameter is a simple scalar, it is assumed to be a
filename. This file will be opened for writing and the compressed
data will be written to it.
A filehandle
If the $output parameter is a filehandle, the compressed data will
be written to it. The string '-' can be used as an alias for
standard output.
A scalar reference
If $output is a scalar reference, the compressed data will be
stored in $$output.
If the $output parameter is any other type,
"IO::Compress::RawDeflate"::new will return undef.
Constructor Options
"OPTS" is any combination of the following options:
"AutoClose => 0|1"
This option is only valid when the $output parameter is a
filehandle. If specified, and the value is true, it will result in
the $output being closed once either the "close" method is called
or the "IO::Compress::RawDeflate" object is destroyed.
This parameter defaults to 0.
"Append => 0|1"
Opens $output in append mode.
The behaviour of this option is dependent on the type of $output.
o A Buffer
If $output is a buffer and "Append" is enabled, all
compressed data will be append to the end of $output.
Otherwise $output will be cleared before any data is written
to it.
o A Filename
If $output is a filename and "Append" is enabled, the file
will be opened in append mode. Otherwise the contents of the
file, if any, will be truncated before any compressed data is
written to it.
o A Filehandle
If $output is a filehandle, the file pointer will be
positioned to the end of the file via a call to "seek" before
any compressed data is written to it. Otherwise the file
pointer will not be moved.
This parameter defaults to 0.
"Merge => 0|1"
This option is used to compress input data and append it to an
existing compressed data stream in $output. The end result is a
single compressed data stream stored in $output.
It is a fatal error to attempt to use this option when $output is
not an RFC 1951 data stream.
There are a number of other limitations with the "Merge" option:
1. This module needs to have been built with zlib 1.2.1 or
better to work. A fatal error will be thrown if "Merge" is
used with an older version of zlib.
2. If $output is a file or a filehandle, it must be seekable.
This parameter defaults to 0.
-Level
Defines the compression level used by zlib. The value should
either be a number between 0 and 9 (0 means no compression and 9
is maximum compression), or one of the symbolic constants defined
below.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
The default is Z_DEFAULT_COMPRESSION.
Note, these constants are not imported by
"IO::Compress::RawDeflate" by default.
use IO::Compress::RawDeflate qw(:strategy);
use IO::Compress::RawDeflate qw(:constants);
use IO::Compress::RawDeflate qw(:all);
-Strategy
Defines the strategy used to tune the compression. Use one of the
symbolic constants defined below.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
The default is Z_DEFAULT_STRATEGY.
"Strict => 0|1"
This is a placeholder option.
Examples
TODO
Methods
print
Usage is
$z->print($data)
print $z $data
Compresses and outputs the contents of the $data parameter. This has
the same behaviour as the "print" built-in.
Returns true if successful.
printf
Usage is
$z->printf($format, $data)
printf $z $format, $data
Compresses and outputs the contents of the $data parameter.
Returns true if successful.
syswrite
Usage is
$z->syswrite $data
$z->syswrite $data, $length
$z->syswrite $data, $length, $offset
Compresses and outputs the contents of the $data parameter.
Returns the number of uncompressed bytes written, or "undef" if
unsuccessful.
write
Usage is
$z->write $data
$z->write $data, $length
$z->write $data, $length, $offset
Compresses and outputs the contents of the $data parameter.
Returns the number of uncompressed bytes written, or "undef" if
unsuccessful.
flush
Usage is
$z->flush;
$z->flush($flush_type);
Flushes any pending compressed data to the output file/buffer.
This method takes an optional parameter, $flush_type, that controls how
the flushing will be carried out. By default the $flush_type used is
"Z_FINISH". Other valid values for $flush_type are "Z_NO_FLUSH",
"Z_SYNC_FLUSH", "Z_FULL_FLUSH" and "Z_BLOCK". It is strongly
recommended that you only set the "flush_type" parameter if you fully
understand the implications of what it does - overuse of "flush" can
seriously degrade the level of compression achieved. See the "zlib"
documentation for details.
Returns true on success.
tell
Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
eof
Usage is
$z->eof();
eof($z);
Returns true if the "close" method has been called.
seek
$z->seek($position, $whence);
seek($z, $position, $whence);
Provides a sub-set of the "seek" functionality, with the restriction
that it is only legal to seek forward in the output file/buffer. It is
a fatal error to attempt to seek backward.
Empty parts of the file/buffer will have NULL (0x00) bytes written to
them.
The $whence parameter takes one the usual values, namely SEEK_SET,
SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
binmode
Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
opened
$z->opened()
Returns true if the object currently refers to a opened file/buffer.
autoflush
my $prev = $z->autoflush()
my $prev = $z->autoflush(EXPR)
If the $z object is associated with a file or a filehandle, this method
returns the current autoflush setting for the underlying filehandle. If
"EXPR" is present, and is non-zero, it will enable flushing after every
write/print operation.
If $z is associated with a buffer, this method has no effect and always
returns "undef".
Note that the special variable $| cannot be used to set or retrieve the
autoflush setting.
input_line_number
$z->input_line_number()
$z->input_line_number(EXPR)
This method always returns "undef" when compressing.
fileno
$z->fileno()
fileno($z)
If the $z object is associated with a file or a filehandle, "fileno"
will return the underlying file descriptor. Once the "close" method is
called "fileno" will return "undef".
If the $z object is associated with a buffer, this method will return
"undef".
close
$z->close() ;
close $z ;
Flushes any pending compressed data and then closes the output
file/buffer.
For most versions of Perl this method will be automatically invoked if
the IO::Compress::RawDeflate object is destroyed (either explicitly or
by the variable with the reference to the object going out of scope).
The exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In
these cases, the "close" method will be called automatically, but not
until global destruction of all live objects when the program is
terminating.
Therefore, if you want your scripts to be able to run on all versions
of Perl, you should call "close" explicitly and not rely on automatic
closing.
Returns true on success, otherwise 0.
If the "AutoClose" option has been enabled when the
IO::Compress::RawDeflate object was created, and the object is
associated with a file, the underlying file will also be closed.
newStream([OPTS])
Usage is
$z->newStream( [OPTS] )
Closes the current compressed data stream and starts a new one.
OPTS consists of any of the options that are available when creating
the $z object.
See the "Constructor Options" section for more details.
deflateParams
Usage is
$z->deflateParams
TODO
Importing
A number of symbolic constants are required by some methods in
"IO::Compress::RawDeflate". None are imported by default.
:all Imports "rawdeflate", $RawDeflateError and all symbolic constants
that can be used by "IO::Compress::RawDeflate". Same as doing this
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError :constants) ;
:constants
Import all symbolic constants. Same as doing this
use IO::Compress::RawDeflate qw(:flush :level :strategy) ;
:flush
These symbolic constants are used by the "flush" method.
Z_NO_FLUSH
Z_PARTIAL_FLUSH
Z_SYNC_FLUSH
Z_FULL_FLUSH
Z_FINISH
Z_BLOCK
:level
These symbolic constants are used by the "Level" option in the
constructor.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
:strategy
These symbolic constants are used by the "Strategy" option in the
constructor.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
EXAMPLES
Apache::GZip Revisited
See IO::Compress::FAQ
Working with Net::FTP
See IO::Compress::FAQ
SEE ALSO
Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip,
IO::Compress::Deflate, IO::Uncompress::Inflate,
IO::Uncompress::RawInflate, IO::Compress::Bzip2,
IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma,
IO::Compress::Xz, IO::Uncompress::UnXz, IO::Compress::Lzop,
IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf,
IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress
IO::Compress::FAQ
File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib
For RFC 1950, 1951 and 1952 see
<http://www.faqs.org/rfcs/rfc1950.html>;,
<http://www.faqs.org/rfcs/rfc1951.html>; and
<http://www.faqs.org/rfcs/rfc1952.html>;
The zlib compression library was written by Jean-loup Gailly
"gzip AT prep.edu" and Mark Adler "madler AT alumni.edu".
The primary site for the zlib compression library is
<http://www.zlib.org>;.
The primary site for gzip is <http://www.gzip.org>;.
AUTHOR
This module was written by Paul Marquess, "pmqs AT cpan.org".
MODIFICATION HISTORY
See the Changes file.
COPYRIGHT AND LICENSE
Copyright (c) 2005-2018 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
perl v5.26.3 2018-04-05 IO::Compress::RawDeflate(3)
Linux-Distributionen
Huschi als Linux-Admin