vgconvert(category1-huschi-net.html) - phpMan

VGCONVERT(8)                System Manager's Manual               VGCONVERT(8)

NAME
       vgconvert - Change volume group metadata format
SYNOPSIS
       vgconvert position_args
           [ option_args ]
DESCRIPTION
       vgconvert  converts  VG  metadata  from one format to another.  The new
       metadata format must be able to fit into the space provided by the  old
       format.
       Because  the  LVM1  format should no longer be used, this command is no
       longer needed in general.
USAGE
       vgconvert VG ...
           [ -f|--force ]
           [ -M|--metadatatype lvm2|lvm1 ]
           [    --labelsector Number ]
           [    --bootloaderareasize Size[m|UNIT] ]
           [    --pvmetadatacopies 0|1|2 ]
           [    --metadatasize Size[m|UNIT] ]
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]
       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --profile String ]
           [    --version ]
OPTIONS
       --bootloaderareasize Size[m|UNIT]
              Create a separate bootloader area of specified size besides PV's
              data area. The bootloader area is an area of reserved space on
              the PV from which LVM will not allocate any extents and it's
              kept untouched. This is primarily aimed for use with bootloaders
              to embed their own data or metadata.  The start of the boot-
              loader area is always aligned, see also --dataalignment and
              --dataalignmentoffset. The bootloader area size may eventually
              end up increased due to the alignment, but it's never less than
              the size that is requested. To see the bootloader area start and
              size of an existing PV use pvs -o +pv_ba_start,pv_ba_size.
       --commandprofile String
              The command profile to use for command configuration.  See
              lvm.conf(5) for more information about profiles.
       --config String
              Config settings for the command. These override lvm.conf set-
              tings.  The String arg uses the same format as lvm.conf, or may
              use section/field syntax.  See lvm.conf(5) for more information
              about config.
       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail
              of messages sent to the log file and/or syslog (if configured).
       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.
              For testing and debugging.
       -f|--force ...
              Override various checks, confirmations and protections.  Use
              with extreme caution.
       -h|--help
              Display help text.
       --labelsector Number
              By default the PV is labelled with an LVM2 identifier in its
              second sector (sector 1). This lets you use a different sector
              near the start of the disk (between 0 and 3 inclusive - see
              LABEL_SCAN_SECTORS in the source). Use with care.
       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvm-
              lockd(8) for more information.
       --longhelp
              Display long help text.
       --metadatasize Size[m|UNIT]
              The approximate amount of space used for each VG metadata area.
              The size may be rounded.
       -M|--metadatatype lvm2|lvm1
              Specifies the type of on-disk metadata to use.  lvm2 (or just 2)
              is the current, standard format.  lvm1 (or just 1) is a histori-
              cal format that can be used for accessing old data.
       --profile String
              An alias for --commandprofile or --metadataprofile, depending on
              the command.
       --pvmetadatacopies 0|1|2
              The number of metadata areas to set aside on a PV for storing VG
              metadata.  When 2, one copy of the VG metadata is stored at the
              front of the PV and a second copy is stored at the end.  When 1,
              one copy of the VG metadata is stored at the front of the PV
              (starting in the 5th sector).  When 0, no copies of the VG meta-
              data are stored on the given PV.  This may be useful in VGs con-
              taining many PVs (this places limitations on the ability to use
              vgsplit later.)
       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --ver-
              bose.  Repeat once to also suppress any prompts with answer
              'no'.
       --reportformat basic|json
              Overrides current output format for reports which is defined
              globally by the report/output_format setting in lvm.conf.  basic
              is the original format with columns and rows.  If there is more
              than one report per command, each report is prefixed with the
              report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.
       -t|--test
              Run in test mode. Commands will not update metadata.  This is
              implemented by disabling all metadata writing but nevertheless
              returning success to the calling function. This may lead to
              unusual error messages in multi-stage operations if a tool
              relies on reading back metadata it believes has changed but
              hasn't.
       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the
              detail of messages sent to stdout and stderr.
       --version
              Display version information.
       -y|--yes
              Do not prompt for confirmation interactively but always assume
              the answer yes. Use with extreme caution.  (For automatic no,
              see -qq.)
VARIABLES
       VG
              Volume Group name.  See lvm(8) for valid names.
       String
              See the option description for information about the string con-
              tent.
       Size[UNIT]
              Size  is  an  input number that accepts an optional unit.  Input
              units are always treated as base two values, regardless of capi-
              talization,  e.g.  'k'  and 'K' both refer to 1024.  The default
              input unit is specified by letter, followed by |UNIT.  UNIT rep-
              resents  other  possible  input units: bBsSkKmMgGtTpPeE.  b|B is
              bytes, s|S is sectors of 512 bytes, k|K  is  kilobytes,  m|M  is
              megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes,
              e|E is exabytes.  (This should not be confused with  the  output
              control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
       See  lvm(8)  for  information  about environment variables used by lvm.
       For example, LVM_VG_NAME can generally be substituted for a required VG
       parameter.
SEE ALSO
       lvm(8) lvm.conf(5) lvmconfig(8)
       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8)
       pvresize(8) pvs(8) pvscan(8)
       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8)  vgcreate(8)  vgcon-
       vert(8)  vgdisplay(8)  vgexport(8)  vgextend(8)  vgimport(8)  vgimport-
       clone(8) vgmerge(8) vgmknodes(8)  vgreduce(8)  vgremove(8)  vgrename(8)
       vgs(8) vgscan(8) vgsplit(8)
       lvcreate(8)  lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8) lvre-
       duce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeacti-
       vate(8) lvmdump(8)
       dmeventd(8)  lvmetad(8)  lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
       cmirrord(8) lvmdbusd(8)
       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)

Red Hat, Inc.      LVM TOOLS 2.02.187(2)-RHEL7 (2020-03-24)       VGCONVERT(8)