utimensat(category9-linux-distributionen.html) - phpMan

UTIMENSAT(2)               Linux Programmer's Manual              UTIMENSAT(2)

NAME
       utimensat, futimens - change file timestamps with nanosecond precision
SYNOPSIS
       #include <fcntl.h> /* Definition of AT_* constants */
       #include <sys/stat.h>
       int utimensat(int dirfd, const char *pathname,
                     const struct timespec times[2], int flags);
       int futimens(int fd, const struct timespec times[2]);
   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
       utimensat():
           Since glibc 2.10:
               _XOPEN_SOURCE >= 700 || _POSIX_C_SOURCE >= 200809L
           Before glibc 2.10:
               _ATFILE_SOURCE
       futimens():
           Since glibc 2.10:
                  _XOPEN_SOURCE >= 700 || _POSIX_C_SOURCE >= 200809L
           Before glibc 2.10:
                  _GNU_SOURCE
DESCRIPTION
       utimensat()  and  futimens()  update  the  timestamps  of  a  file with
       nanosecond precision.  This contrasts with the historical utime(2)  and
       utimes(2),  which permit only second and microsecond precision, respec-
       tively, when setting file timestamps.
       With utimensat() the file is specified via the pathname given in  path-
       name.   With  futimens() the file whose timestamps are to be updated is
       specified via an open file descriptor, fd.
       For both calls, the new file timestamps  are  specified  in  the  array
       times:  times[0] specifies the new "last access time" (atime); times[1]
       specifies the new "last modification time" (mtime).  Each of  the  ele-
       ments  of  times specifies a time as the number of seconds and nanosec-
       onds since the Epoch, 1970-01-01 00:00:00 +0000 (UTC).   This  informa-
       tion is conveyed in a structure of the following form:
           struct timespec {
               time_t tv_sec;        /* seconds */
               long   tv_nsec;       /* nanoseconds */
           };
       Updated  file timestamps are set to the greatest value supported by the
       file system that is not greater than the specified time.
       If the tv_nsec field of one of the timespec structures has the  special
       value  UTIME_NOW,  then  the corresponding file timestamp is set to the
       current time.  If the tv_nsec field of one of the  timespec  structures
       has the special value UTIME_OMIT, then the corresponding file timestamp
       is left unchanged.  In both of these cases, the  value  of  the  corre-
       sponding tv_sec field is ignored.
       If times is NULL, then both timestamps are set to the current time.
   Permissions requirements
       To  set  both file timestamps to the current time (i.e., times is NULL,
       or both tv_nsec fields specify UTIME_NOW), either:
       1. the caller must have write access to the file;
       2. the caller's effective user ID must match the owner of the file; or
       3. the caller must have appropriate privileges.
       To make any change other than setting both timestamps  to  the  current
       time  (i.e.,  times  is  not  NULL,  and  both  tv_nsec  fields are not
       UTIME_NOW and both tv_nsec fields are not UTIME_OMIT), either condition
       2 or 3 above must apply.
       If both tv_nsec fields are specified as UTIME_OMIT, then no file owner-
       ship or permission checks are performed, and the  file  timestamps  are
       not modified, but other error conditions may still be detected.
   utimensat() specifics
       If  pathname is relative, then by default it is interpreted relative to
       the directory referred to by the open file  descriptor,  dirfd  (rather
       than  relative to the current working directory of the calling process,
       as is done by utimes(2) for a relative pathname).  See openat(2) for an
       explanation of why this can be useful.
       If  pathname  is relative and dirfd is the special value AT_FDCWD, then
       pathname is interpreted relative to the current  working  directory  of
       the calling process (like utimes(2)).
       If pathname is absolute, then dirfd is ignored.
       The  flags  field is a bit mask that may be 0, or include the following
       constant, defined in <fcntl.h>:
       AT_SYMLINK_NOFOLLOW
              If pathname specifies a symbolic link,  then  update  the  time-
              stamps of the link, rather than the file to which it refers.
RETURN VALUE
       On  success,  utimensat()  and  futimens()  return  0.  On error, -1 is
       returned and errno is set to indicate the error.
ERRORS
       EACCES times is NULL, or both tv_nsec values are UTIME_NOW, and:
              * the effective user ID of the caller does not match  the  owner
                of  the  file,  the  caller  does not have write access to the
                file, and the caller is not privileged (Linux: does  not  have
                either the CAP_FOWNER or the CAP_DAC_OVERRIDE capability); or,
              * the file is marked immutable (see chattr(1)).
       EBADF  (futimens()) fd is not a valid file descriptor.
       EBADF  (utimensat()) pathname is a relative pathname, but dirfd is nei-
              ther AT_FDCWD nor a valid file descriptor.
       EFAULT times pointed to an invalid address; or, dirfd was AT_FDCWD, and
              pathname is NULL or an invalid address.
       EINVAL Invalid value in flags.
       EINVAL Invalid  value in one of the tv_nsec fields (value outside range
              0 to 999,999,999,  and  not  UTIME_NOW  or  UTIME_OMIT);  or  an
              invalid value in one of the tv_sec fields.
       EINVAL pathname  is  NULL,  dirfd  is  not AT_FDCWD, and flags contains
              AT_SYMLINK_NOFOLLOW.
       ELOOP  (utimensat())  Too  many  symbolic  links  were  encountered  in
              resolving pathname.
       ENAMETOOLONG
              (utimensat()) pathname is too long.
       ENOENT (utimensat())  A  component  of  pathname  does  not refer to an
              existing directory or file, or pathname is an empty string.
       ENOTDIR
              (utimensat()) pathname is a relative pathname, but dirfd is nei-
              ther  AT_FDCWD  nor  a file descriptor referring to a directory;
              or, one of the prefix components of pathname is not a directory.
       EPERM  The caller attempted to change one or both timestamps to a value
              other  than the current time, or to change one of the timestamps
              to the current time while leaving the other timestamp unchanged,
              (i.e., times is not NULL, both tv_nsec fields are not UTIME_NOW,
              and both tv_nsec fields are not UTIME_OMIT) and:
              * the caller's effective user ID does not  match  the  owner  of
                file,  and  the caller is not privileged (Linux: does not have
                the CAP_FOWNER capability); or,
              * the file is marked append-only or immutable (see chattr(1)).
       EROFS  The file is on a read-only file system.
       ESRCH  (utimensat()) Search permission is denied for one of the  prefix
              components of pathname.
VERSIONS
       utimensat()  was  added  to  Linux  in kernel 2.6.22; glibc support was
       added with version 2.6.
       Support for futimens() first appeared in glibc 2.6.
CONFORMING TO
       futimens() and utimensat() are specified in POSIX.1-2008.
NOTES
       utimensat() obsoletes futimesat(2).
       On Linux, timestamps cannot be changed for a file marked immutable, and
       the  only  change  permitted for files marked append-only is to set the
       timestamps to the current time.  (This is consistent with the  histori-
       cal behavior of utime(2) and utimes(2) on Linux.)
       On  Linux,  futimens()  is a library function implemented on top of the
       utimensat() system call.  To support this, the Linux utimensat() system
       call  implements  a  nonstandard feature: if pathname is NULL, then the
       call modifies the timestamps of  the  file  referred  to  by  the  file
       descriptor  dirfd  (which  may  refer to any type of file).  Using this
       feature, the call futimens(fd, times) is implemented as:
           utimensat(fd, NULL, times, 0);
BUGS
       Several bugs afflict  utimensat()  and  futimens()  on  kernels  before
       2.6.26.   These  bugs are either nonconformances with the POSIX.1 draft
       specification or inconsistencies with historical Linux behavior.
       * POSIX.1 specifies that if one of the tv_nsec  fields  has  the  value
         UTIME_NOW  or  UTIME_OMIT, then the value of the corresponding tv_sec
         field should be ignored.  Instead, the value of the tv_sec  field  is
         required to be 0 (or the error EINVAL results).
       * Various  bugs  mean that for the purposes of permission checking, the
         case where both tv_nsec fields are  set  to  UTIME_NOW  isn't  always
         treated  the same as specifying times as NULL, and the case where one
         tv_nsec value is UTIME_NOW and the other is UTIME_OMIT isn't  treated
         the  same  as specifying times as a pointer to an array of structures
         containing arbitrary time values.  As a result,  in  some  cases:  a)
         file  timestamps can be updated by a process that shouldn't have per-
         mission to perform updates; b) file timestamps can't be updated by  a
         process  that  should  have permission to perform updates; and c) the
         wrong errno value is returned in case of an error.
       * POSIX.1 says that a process that has write access  to  the  file  can
         make a call with times as NULL, or with times pointing to an array of
         structures in which both tv_nsec fields are UTIME_NOW,  in  order  to
         update  both  timestamps  to  the  current time.  However, futimens()
         instead checks whether the access mode of the file descriptor  allows
         writing.
SEE ALSO
       chattr(1),  futimesat(2),  openat(2),  stat(2),  utimes(2), futimes(3),
       path_resolution(7), symlink(7)
COLOPHON
       This page is part of release 3.53 of the Linux  man-pages  project.   A
       description  of  the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux                             2012-03-25                      UTIMENSAT(2)