SIGACTION(2) Linux Programmer's Manual SIGACTION(2)
NAME
sigaction - examine and change a signal action
SYNOPSIS
#include <signal.h>
int sigaction(int signum, const struct sigaction *act,
struct sigaction *oldact);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
sigaction(): _POSIX_C_SOURCE >= 1 || _XOPEN_SOURCE || _POSIX_SOURCE
siginfo_t: _POSIX_C_SOURCE >= 199309L
DESCRIPTION
The sigaction() system call is used to change the action taken by a
process on receipt of a specific signal. (See signal(7) for an over-
view of signals.)
signum specifies the signal and can be any valid signal except SIGKILL
and SIGSTOP.
If act is non-NULL, the new action for signal signum is installed from
act. If oldact is non-NULL, the previous action is saved in oldact.
The sigaction structure is defined as something like:
struct sigaction {
void (*sa_handler)(int);
void (*sa_sigaction)(int, siginfo_t *, void *);
sigset_t sa_mask;
int sa_flags;
void (*sa_restorer)(void);
};
On some architectures a union is involved: do not assign to both
sa_handler and sa_sigaction.
The sa_restorer element is obsolete and should not be used. POSIX does
not specify a sa_restorer element.
sa_handler specifies the action to be associated with signum and may be
SIG_DFL for the default action, SIG_IGN to ignore this signal, or a
pointer to a signal handling function. This function receives the sig-
nal number as its only argument.
If SA_SIGINFO is specified in sa_flags, then sa_sigaction (instead of
sa_handler) specifies the signal-handling function for signum. This
function receives the signal number as its first argument, a pointer to
a siginfo_t as its second argument and a pointer to a ucontext_t (cast
to void *) as its third argument. (Commonly, the handler function
doesn't make any use of the third argument. See getcontext(3) for fur-
ther information about ucontext_t.)
sa_mask specifies a mask of signals which should be blocked (i.e.,
added to the signal mask of the thread in which the signal handler is
invoked) during execution of the signal handler. In addition, the sig-
nal which triggered the handler will be blocked, unless the SA_NODEFER
flag is used.
sa_flags specifies a set of flags which modify the behavior of the sig-
nal. It is formed by the bitwise OR of zero or more of the following:
SA_NOCLDSTOP
If signum is SIGCHLD, do not receive notification when child
processes stop (i.e., when they receive one of SIGSTOP,
SIGTSTP, SIGTTIN or SIGTTOU) or resume (i.e., they receive
SIGCONT) (see wait(2)). This flag is meaningful only when
establishing a handler for SIGCHLD.
SA_NOCLDWAIT (since Linux 2.6)
If signum is SIGCHLD, do not transform children into zombies
when they terminate. See also waitpid(2). This flag is
meaningful only when establishing a handler for SIGCHLD, or
when setting that signal's disposition to SIG_DFL.
If the SA_NOCLDWAIT flag is set when establishing a handler
for SIGCHLD, POSIX.1 leaves it unspecified whether a SIGCHLD
signal is generated when a child process terminates. On
Linux, a SIGCHLD signal is generated in this case; on some
other implementations, it is not.
SA_NODEFER
Do not prevent the signal from being received from within
its own signal handler. This flag is meaningful only when
establishing a signal handler. SA_NOMASK is an obsolete,
nonstandard synonym for this flag.
SA_ONSTACK
Call the signal handler on an alternate signal stack pro-
vided by sigaltstack(2). If an alternate stack is not
available, the default stack will be used. This flag is
meaningful only when establishing a signal handler.
SA_RESETHAND
Restore the signal action to the default upon entry to the
signal handler. This flag is meaningful only when estab-
lishing a signal handler. SA_ONESHOT is an obsolete, non-
standard synonym for this flag.
SA_RESTART
Provide behavior compatible with BSD signal semantics by
making certain system calls restartable across signals.
This flag is meaningful only when establishing a signal han-
dler. See signal(7) for a discussion of system call
restarting.
SA_SIGINFO (since Linux 2.2)
The signal handler takes three arguments, not one. In this
case, sa_sigaction should be set instead of sa_handler.
This flag is meaningful only when establishing a signal han-
dler.
The siginfo_t argument to sa_sigaction is a struct with the following
elements:
siginfo_t {
int si_signo; /* Signal number */
int si_errno; /* An errno value */
int si_code; /* Signal code */
int si_trapno; /* Trap number that caused
hardware-generated signal
(unused on most architectures) */
pid_t si_pid; /* Sending process ID */
uid_t si_uid; /* Real user ID of sending process */
int si_status; /* Exit value or signal */
clock_t si_utime; /* User time consumed */
clock_t si_stime; /* System time consumed */
sigval_t si_value; /* Signal value */
int si_int; /* POSIX.1b signal */
void *si_ptr; /* POSIX.1b signal */
int si_overrun; /* Timer overrun count; POSIX.1b timers */
int si_timerid; /* Timer ID; POSIX.1b timers */
void *si_addr; /* Memory location which caused fault */
long si_band; /* Band event (was int in
glibc 2.3.2 and earlier) */
int si_fd; /* File descriptor */
short si_addr_lsb; /* Least significant bit of address
(since Linux 2.6.32) */
}
si_signo, si_errno and si_code are defined for all signals. (si_errno
is generally unused on Linux.) The rest of the struct may be a union,
so that one should read only the fields that are meaningful for the
given signal:
* Signals sent with kill(2) and sigqueue(3) fill in si_pid and si_uid.
In addition, signals sent with sigqueue(3) fill in si_int and si_ptr
with the values specified by the sender of the signal; see
sigqueue(3) for more details.
* Signals sent by POSIX.1b timers (since Linux 2.6) fill in si_overrun
and si_timerid. The si_timerid field is an internal ID used by the
kernel to identify the timer; it is not the same as the timer ID
returned by timer_create(2). The si_overrun field is the timer over-
run count; this is the same information as is obtained by a call to
timer_getoverrun(2). These fields are nonstandard Linux extensions.
* Signals sent for message queue notification (see the description of
SIGEV_SIGNAL in mq_notify(3)) fill in si_int/si_ptr, with the
sigev_value supplied to mq_notify(3); si_pid, with the process ID of
the message sender; and si_uid, with the real user ID of the message
sender.
* SIGCHLD fills in si_pid, si_uid, si_status, si_utime and si_stime,
providing information about the child. The si_pid field is the
process ID of the child; si_uid is the child's real user ID. The
si_status field contains the exit status of the child (if si_code is
CLD_EXITED), or the signal number that caused the process to change
state. The si_utime and si_stime contain the user and system CPU
time used by the child process; these fields do not include the times
used by waited-for children (unlike getrusage(2) and time(2)). In
kernels up to 2.6, and since 2.6.27, these fields report CPU time in
units of sysconf(_SC_CLK_TCK). In 2.6 kernels before 2.6.27, a bug
meant that these fields reported time in units of the (configurable)
system jiffy (see time(7)).
* SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP fill in si_addr with the
address of the fault. On some architectures, these signals also fill
in the si_trapno filed. Some suberrors of SIGBUS, in particular
BUS_MCEERR_AO and BUS_MCEERR_AR, also fill in si_addr_lsb. This
field indicates the least significant bit of the reported address and
therefore the extent of the corruption. For example, if a full page
was corrupted, si_addr_lsb contains log2(sysconf(_SC_PAGESIZE)).
BUS_MCERR_* and si_addr_lsb are Linux-specific extensions.
* SIGIO/SIGPOLL (the two names are synonyms on Linux) fills in si_band
and si_fd. The si_band event is a bit mask containing the same val-
ues as are filled in the revents field by poll(2). The si_fd field
indicates the file descriptor for which the I/O event occurred.
si_code is a value (not a bit mask) indicating why this signal was
sent. The following list shows the values which can be placed in
si_code for any signal, along with reason that the signal was gener-
ated.
SI_USER kill(2)
SI_KERNEL Sent by the kernel.
SI_QUEUE sigqueue(3)
SI_TIMER POSIX timer expired
SI_MESGQ POSIX message queue state changed (since Linux
2.6.6); see mq_notify(3)
SI_ASYNCIO AIO completed
SI_SIGIO Queued SIGIO (only in kernels up to Linux 2.2; from
Linux 2.4 onward SIGIO/SIGPOLL fills in si_code as
described below).
SI_TKILL tkill(2) or tgkill(2) (since Linux 2.4.19)
The following values can be placed in si_code for a SIGILL signal:
ILL_ILLOPC illegal opcode
ILL_ILLOPN illegal operand
ILL_ILLADR illegal addressing mode
ILL_ILLTRP illegal trap
ILL_PRVOPC privileged opcode
ILL_PRVREG privileged register
ILL_COPROC coprocessor error
ILL_BADSTK internal stack error
The following values can be placed in si_code for a SIGFPE signal:
FPE_INTDIV integer divide by zero
FPE_INTOVF integer overflow
FPE_FLTDIV floating-point divide by zero
FPE_FLTOVF floating-point overflow
FPE_FLTUND floating-point underflow
FPE_FLTRES floating-point inexact result
FPE_FLTINV floating-point invalid operation
FPE_FLTSUB subscript out of range
The following values can be placed in si_code for a SIGSEGV signal:
SEGV_MAPERR address not mapped to object
SEGV_ACCERR invalid permissions for mapped object
The following values can be placed in si_code for a SIGBUS signal:
BUS_ADRALN invalid address alignment
BUS_ADRERR nonexistent physical address
BUS_OBJERR object-specific hardware error
BUS_MCEERR_AR (since Linux 2.6.32)
Hardware memory error consumed on a machine check;
action required.
BUS_MCEERR_AO (since Linux 2.6.32)
Hardware memory error detected in process but not
consumed; action optional.
The following values can be placed in si_code for a SIGTRAP signal:
TRAP_BRKPT process breakpoint
TRAP_TRACE process trace trap
TRAP_BRANCH (since Linux 2.4)
process taken branch trap
TRAP_HWBKPT (since Linux 2.4)
hardware breakpoint/watchpoint
The following values can be placed in si_code for a SIGCHLD signal:
CLD_EXITED child has exited
CLD_KILLED child was killed
CLD_DUMPED child terminated abnormally
CLD_TRAPPED traced child has trapped
CLD_STOPPED child has stopped
CLD_CONTINUED stopped child has continued (since Linux 2.6.9)
The following values can be placed in si_code for a SIGIO/SIGPOLL sig-
nal:
POLL_IN data input available
POLL_OUT output buffers available
POLL_MSG input message available
POLL_ERR I/O error
POLL_PRI high priority input available
POLL_HUP device disconnected
RETURN VALUE
sigaction() returns 0 on success; on error, -1 is returned, and errno
is set to indicate the error.
ERRORS
EFAULT act or oldact points to memory which is not a valid part of the
process address space.
EINVAL An invalid signal was specified. This will also be generated if
an attempt is made to change the action for SIGKILL or SIGSTOP,
which cannot be caught or ignored.
CONFORMING TO
POSIX.1-2001, SVr4.
NOTES
A child created via fork(2) inherits a copy of its parent's signal dis-
positions. During an execve(2), the dispositions of handled signals
are reset to the default; the dispositions of ignored signals are left
unchanged.
According to POSIX, the behavior of a process is undefined after it
ignores a SIGFPE, SIGILL, or SIGSEGV signal that was not generated by
kill(2) or raise(3). Integer division by zero has undefined result.
On some architectures it will generate a SIGFPE signal. (Also dividing
the most negative integer by -1 may generate SIGFPE.) Ignoring this
signal might lead to an endless loop.
POSIX.1-1990 disallowed setting the action for SIGCHLD to SIG_IGN.
POSIX.1-2001 allows this possibility, so that ignoring SIGCHLD can be
used to prevent the creation of zombies (see wait(2)). Nevertheless,
the historical BSD and System V behaviors for ignoring SIGCHLD differ,
so that the only completely portable method of ensuring that terminated
children do not become zombies is to catch the SIGCHLD signal and per-
form a wait(2) or similar.
POSIX.1-1990 specified only SA_NOCLDSTOP. POSIX.1-2001 added SA_NOCLD-
WAIT, SA_RESETHAND, SA_NODEFER, and SA_SIGINFO. Use of these latter
values in sa_flags may be less portable in applications intended for
older UNIX implementations.
The SA_RESETHAND flag is compatible with the SVr4 flag of the same
name.
The SA_NODEFER flag is compatible with the SVr4 flag of the same name
under kernels 1.3.9 and newer. On older kernels the Linux implementa-
tion allowed the receipt of any signal, not just the one we are
installing (effectively overriding any sa_mask settings).
sigaction() can be called with a NULL second argument to query the cur-
rent signal handler. It can also be used to check whether a given sig-
nal is valid for the current machine by calling it with NULL second and
third arguments.
It is not possible to block SIGKILL or SIGSTOP (by specifying them in
sa_mask). Attempts to do so are silently ignored.
See sigsetops(3) for details on manipulating signal sets.
See signal(7) for a list of the async-signal-safe functions that can be
safely called inside from inside a signal handler.
Undocumented
Before the introduction of SA_SIGINFO it was also possible to get some
additional information, namely by using a sa_handler with second argu-
ment of type struct sigcontext. See the relevant Linux kernel sources
for details. This use is obsolete now.
BUGS
In kernels up to and including 2.6.13, specifying SA_NODEFER in
sa_flags prevents not only the delivered signal from being masked dur-
ing execution of the handler, but also the signals specified in
sa_mask. This bug was fixed in kernel 2.6.14.
EXAMPLE
See mprotect(2).
SEE ALSO
kill(1), kill(2), killpg(2), pause(2), restart_syscall(2), sigalt-
stack(2), signal(2), signalfd(2), sigpending(2), sigprocmask(2), sig-
suspend(2), wait(2), raise(3), siginterrupt(3), sigqueue(3), sigse-
tops(3), sigvec(3), core(5), signal(7)
COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2013-07-30 SIGACTION(2)