perlop(category22-scripting.html) - phpMan

PERLOP(1)              Perl Programmers Reference Guide              PERLOP(1)

NAME
       perlop - Perl operators and precedence
DESCRIPTION
   Operator Precedence and Associativity
       Operator precedence and associativity work in Perl more or less like
       they do in mathematics.
       Operator precedence means some operators are evaluated before others.
       For example, in "2 + 4 * 5", the multiplication has higher precedence
       so "4 * 5" is evaluated first yielding "2 + 20 == 22" and not "6 * 5 ==
       30".
       Operator associativity defines what happens if a sequence of the same
       operators is used one after another: whether the evaluator will
       evaluate the left operations first or the right.  For example, in "8 -
       4 - 2", subtraction is left associative so Perl evaluates the
       expression left to right.  "8 - 4" is evaluated first making the
       expression "4 - 2 == 2" and not "8 - 2 == 6".
       Perl operators have the following associativity and precedence, listed
       from highest precedence to lowest.  Operators borrowed from C keep the
       same precedence relationship with each other, even where C's precedence
       is slightly screwy.  (This makes learning Perl easier for C folks.)
       With very few exceptions, these all operate on scalar values only, not
       array values.
           left        terms and list operators (leftward)
           left        ->
           nonassoc    ++ --
           right       **
           right       ! ~ \ and unary + and -
           left        =~ !~
           left        * / % x
           left        + - .
           left        << >>
           nonassoc    named unary operators
           nonassoc    < > <= >= lt gt le ge
           nonassoc    == != <=> eq ne cmp ~~
           left        &
           left        | ^
           left        &&
           left        || //
           nonassoc    ..  ...
           right       ?:
           right       = += -= *= etc.
           left        , =>
           nonassoc    list operators (rightward)
           right       not
           left        and
           left        or xor
       In the following sections, these operators are covered in precedence
       order.
       Many operators can be overloaded for objects.  See overload.
   Terms and List Operators (Leftward)
       A TERM has the highest precedence in Perl.  They include variables,
       quote and quote-like operators, any expression in parentheses, and any
       function whose arguments are parenthesized.  Actually, there aren't
       really functions in this sense, just list operators and unary operators
       behaving as functions because you put parentheses around the arguments.
       These are all documented in perlfunc.
       If any list operator (print(), etc.) or any unary operator (chdir(),
       etc.)  is followed by a left parenthesis as the next token, the
       operator and arguments within parentheses are taken to be of highest
       precedence, just like a normal function call.
       In the absence of parentheses, the precedence of list operators such as
       "print", "sort", or "chmod" is either very high or very low depending
       on whether you are looking at the left side or the right side of the
       operator.  For example, in
           @ary = (1, 3, sort 4, 2);
           print @ary;         # prints 1324
       the commas on the right of the sort are evaluated before the sort, but
       the commas on the left are evaluated after.  In other words, list
       operators tend to gobble up all arguments that follow, and then act
       like a simple TERM with regard to the preceding expression.  Be careful
       with parentheses:
           # These evaluate exit before doing the print:
           print($foo, exit);  # Obviously not what you want.
           print $foo, exit;   # Nor is this.
           # These do the print before evaluating exit:
           (print $foo), exit; # This is what you want.
           print($foo), exit;  # Or this.
           print ($foo), exit; # Or even this.
       Also note that
           print ($foo & 255) + 1, "\n";
       probably doesn't do what you expect at first glance.  The parentheses
       enclose the argument list for "print" which is evaluated (printing the
       result of "$foo & 255").  Then one is added to the return value of
       "print" (usually 1).  The result is something like this:
           1 + 1, "\n";    # Obviously not what you meant.
       To do what you meant properly, you must write:
           print(($foo & 255) + 1, "\n");
       See "Named Unary Operators" for more discussion of this.
       Also parsed as terms are the "do {}" and "eval {}" constructs, as well
       as subroutine and method calls, and the anonymous constructors "[]" and
       "{}".
       See also "Quote and Quote-like Operators" toward the end of this
       section, as well as "I/O Operators".
   The Arrow Operator
       ""->"" is an infix dereference operator, just as it is in C and C++.
       If the right side is either a "[...]", "{...}", or a "(...)" subscript,
       then the left side must be either a hard or symbolic reference to an
       array, a hash, or a subroutine respectively.  (Or technically speaking,
       a location capable of holding a hard reference, if it's an array or
       hash reference being used for assignment.)  See perlreftut and perlref.
       Otherwise, the right side is a method name or a simple scalar variable
       containing either the method name or a subroutine reference, and the
       left side must be either an object (a blessed reference) or a class
       name (that is, a package name).  See perlobj.
   Auto-increment and Auto-decrement
       "++" and "--" work as in C.  That is, if placed before a variable, they
       increment or decrement the variable by one before returning the value,
       and if placed after, increment or decrement after returning the value.
           $i = 0;  $j = 0;
           print $i++;  # prints 0
           print ++$j;  # prints 1
       Note that just as in C, Perl doesn't define when the variable is
       incremented or decremented. You just know it will be done sometime
       before or after the value is returned. This also means that modifying a
       variable twice in the same statement will lead to undefined behavior.
       Avoid statements like:
           $i = $i ++;
           print ++ $i + $i ++;
       Perl will not guarantee what the result of the above statements is.
       The auto-increment operator has a little extra builtin magic to it.  If
       you increment a variable that is numeric, or that has ever been used in
       a numeric context, you get a normal increment.  If, however, the
       variable has been used in only string contexts since it was set, and
       has a value that is not the empty string and matches the pattern
       "/^[a-zA-Z]*[0-9]*\z/", the increment is done as a string, preserving
       each character within its range, with carry:
           print ++($foo = "99");      # prints "100"
           print ++($foo = "a0");      # prints "a1"
           print ++($foo = "Az");      # prints "Ba"
           print ++($foo = "zz");      # prints "aaa"
       "undef" is always treated as numeric, and in particular is changed to 0
       before incrementing (so that a post-increment of an undef value will
       return 0 rather than "undef").
       The auto-decrement operator is not magical.
   Exponentiation
       Binary "**" is the exponentiation operator.  It binds even more tightly
       than unary minus, so -2**4 is -(2**4), not (-2)**4. (This is
       implemented using C's pow(3) function, which actually works on doubles
       internally.)
   Symbolic Unary Operators
       Unary "!" performs logical negation, that is, "not".  See also "not"
       for a lower precedence version of this.
       Unary "-" performs arithmetic negation if the operand is numeric,
       including any string that looks like a number.  If the operand is an
       identifier, a string consisting of a minus sign concatenated with the
       identifier is returned.  Otherwise, if the string starts with a plus or
       minus, a string starting with the opposite sign is returned.  One
       effect of these rules is that -bareword is equivalent to the string
       "-bareword".  If, however, the string begins with a non-alphabetic
       character (excluding "+" or "-"), Perl will attempt to convert the
       string to a numeric and the arithmetic negation is performed. If the
       string cannot be cleanly converted to a numeric, Perl will give the
       warning Argument "the string" isn't numeric in negation (-) at ....
       Unary "~" performs bitwise negation, that is, 1's complement.  For
       example, "0666 & ~027" is 0640.  (See also "Integer Arithmetic" and
       "Bitwise String Operators".)  Note that the width of the result is
       platform-dependent: ~0 is 32 bits wide on a 32-bit platform, but 64
       bits wide on a 64-bit platform, so if you are expecting a certain bit
       width, remember to use the "&" operator to mask off the excess bits.
       When complementing strings, if all characters have ordinal values under
       256, then their complements will, also.  But if they do not, all
       characters will be in either 32- or 64-bit complements, depending on
       your architecture.  So for example, "~"\x{3B1}"" is "\x{FFFF_FC4E}" on
       32-bit machines and "\x{FFFF_FFFF_FFFF_FC4E}" on 64-bit machines.
       Unary "+" has no effect whatsoever, even on strings.  It is useful
       syntactically for separating a function name from a parenthesized
       expression that would otherwise be interpreted as the complete list of
       function arguments.  (See examples above under "Terms and List
       Operators (Leftward)".)
       Unary "\" creates a reference to whatever follows it.  See perlreftut
       and perlref.  Do not confuse this behavior with the behavior of
       backslash within a string, although both forms do convey the notion of
       protecting the next thing from interpolation.
   Binding Operators
       Binary "=~" binds a scalar expression to a pattern match.  Certain
       operations search or modify the string $_ by default.  This operator
       makes that kind of operation work on some other string.  The right
       argument is a search pattern, substitution, or transliteration.  The
       left argument is what is supposed to be searched, substituted, or
       transliterated instead of the default $_.  When used in scalar context,
       the return value generally indicates the success of the operation.  The
       exceptions are substitution (s///) and transliteration (y///) with the
       "/r" (non-destructive) option, which cause the return value to be the
       result of the substitution.  Behavior in list context depends on the
       particular operator.  See "Regexp Quote-Like Operators" for details and
       perlretut for examples using these operators.
       If the right argument is an expression rather than a search pattern,
       substitution, or transliteration, it is interpreted as a search pattern
       at run time. Note that this means that its contents will be
       interpolated twice, so
           '\\' =~ q'\\';
       is not ok, as the regex engine will end up trying to compile the
       pattern "\", which it will consider a syntax error.
       Binary "!~" is just like "=~" except the return value is negated in the
       logical sense.
       Binary "!~" with a non-destructive substitution (s///r) or
       transliteration (y///r) is a syntax error.
   Multiplicative Operators
       Binary "*" multiplies two numbers.
       Binary "/" divides two numbers.
       Binary "%" is the modulo operator, which computes the division
       remainder of its first argument with respect to its second argument.
       Given integer operands $a and $b: If $b is positive, then "$a % $b" is
       $a minus the largest multiple of $b less than or equal to $a.  If $b is
       negative, then "$a % $b" is $a minus the smallest multiple of $b that
       is not less than $a (that is, the result will be less than or equal to
       zero).  If the operands $a and $b are floating point values and the
       absolute value of $b (that is "abs($b)") is less than "(UV_MAX + 1)",
       only the integer portion of $a and $b will be used in the operation
       (Note: here "UV_MAX" means the maximum of the unsigned integer type).
       If the absolute value of the right operand ("abs($b)") is greater than
       or equal to "(UV_MAX + 1)", "%" computes the floating-point remainder
       $r in the equation "($r = $a - $i*$b)" where $i is a certain integer
       that makes $r have the same sign as the right operand $b (not as the
       left operand $a like C function "fmod()") and the absolute value less
       than that of $b.  Note that when "use integer" is in scope, "%" gives
       you direct access to the modulo operator as implemented by your C
       compiler.  This operator is not as well defined for negative operands,
       but it will execute faster.
       Binary "x" is the repetition operator.  In scalar context or if the
       left operand is not enclosed in parentheses, it returns a string
       consisting of the left operand repeated the number of times specified
       by the right operand.  In list context, if the left operand is enclosed
       in parentheses or is a list formed by "qw/STRING/", it repeats the
       list.  If the right operand is zero or negative, it returns an empty
       string or an empty list, depending on the context.
           print '-' x 80;             # print row of dashes
           print "\t" x ($tab/8), ' ' x ($tab%8);      # tab over
           @ones = (1) x 80;           # a list of 80 1's
           @ones = (5) x @ones;        # set all elements to 5
   Additive Operators
       Binary "+" returns the sum of two numbers.
       Binary "-" returns the difference of two numbers.
       Binary "." concatenates two strings.
   Shift Operators
       Binary "<<" returns the value of its left argument shifted left by the
       number of bits specified by the right argument.  Arguments should be
       integers.  (See also "Integer Arithmetic".)
       Binary ">>" returns the value of its left argument shifted right by the
       number of bits specified by the right argument.  Arguments should be
       integers.  (See also "Integer Arithmetic".)
       Note that both "<<" and ">>" in Perl are implemented directly using
       "<<" and ">>"  in C.  If "use integer" (see "Integer Arithmetic") is in
       force then signed C integers are used, else unsigned C integers are
       used.  Either way, the implementation isn't going to generate results
       larger than the size of the integer type Perl was built with (32 bits
       or 64 bits).
       The result of overflowing the range of the integers is undefined
       because it is undefined also in C.  In other words, using 32-bit
       integers, "1 << 32" is undefined.  Shifting by a negative number of
       bits is also undefined.
       If you get tired of being subject to your platform's native integers,
       the "use bigint" pragma neatly sidesteps the issue altogether:
           print 20 << 20;  # 20971520
           print 20 << 40;  # 5120 on 32-bit machines,
                            # 21990232555520 on 64-bit machines
           use bigint;
           print 20 << 100; # 25353012004564588029934064107520
   Named Unary Operators
       The various named unary operators are treated as functions with one
       argument, with optional parentheses.
       If any list operator (print(), etc.) or any unary operator (chdir(),
       etc.)  is followed by a left parenthesis as the next token, the
       operator and arguments within parentheses are taken to be of highest
       precedence, just like a normal function call.  For example, because
       named unary operators are higher precedence than "||":
           chdir $foo    || die;       # (chdir $foo) || die
           chdir($foo)   || die;       # (chdir $foo) || die
           chdir ($foo)  || die;       # (chdir $foo) || die
           chdir +($foo) || die;       # (chdir $foo) || die
       but, because * is higher precedence than named operators:
           chdir $foo * 20;    # chdir ($foo * 20)
           chdir($foo) * 20;   # (chdir $foo) * 20
           chdir ($foo) * 20;  # (chdir $foo) * 20
           chdir +($foo) * 20; # chdir ($foo * 20)
           rand 10 * 20;       # rand (10 * 20)
           rand(10) * 20;      # (rand 10) * 20
           rand (10) * 20;     # (rand 10) * 20
           rand +(10) * 20;    # rand (10 * 20)
       Regarding precedence, the filetest operators, like "-f", "-M", etc. are
       treated like named unary operators, but they don't follow this
       functional parenthesis rule.  That means, for example, that
       "-f($file).".bak"" is equivalent to "-f "$file.bak"".
       See also "Terms and List Operators (Leftward)".
   Relational Operators
       Perl operators that return true or false generally return values that
       can be safely used as numbers.  For example, the relational operators
       in this section and the equality operators in the next one return 1 for
       true and a special version of the defined empty string, "", which
       counts as a zero but is exempt from warnings about improper numeric
       conversions, just as "0 but true" is.
       Binary "<" returns true if the left argument is numerically less than
       the right argument.
       Binary ">" returns true if the left argument is numerically greater
       than the right argument.
       Binary "<=" returns true if the left argument is numerically less than
       or equal to the right argument.
       Binary ">=" returns true if the left argument is numerically greater
       than or equal to the right argument.
       Binary "lt" returns true if the left argument is stringwise less than
       the right argument.
       Binary "gt" returns true if the left argument is stringwise greater
       than the right argument.
       Binary "le" returns true if the left argument is stringwise less than
       or equal to the right argument.
       Binary "ge" returns true if the left argument is stringwise greater
       than or equal to the right argument.
   Equality Operators
       Binary "==" returns true if the left argument is numerically equal to
       the right argument.
       Binary "!=" returns true if the left argument is numerically not equal
       to the right argument.
       Binary "<=>" returns -1, 0, or 1 depending on whether the left argument
       is numerically less than, equal to, or greater than the right argument.
       If your platform supports NaNs (not-a-numbers) as numeric values, using
       them with "<=>" returns undef.  NaN is not "<", "==", ">", "<=" or ">="
       anything (even NaN), so those 5 return false. NaN != NaN returns true,
       as does NaN != anything else. If your platform doesn't support NaNs
       then NaN is just a string with numeric value 0.
           $ perl -le '$a = "NaN"; print "No NaN support here" if $a == $a'
           $ perl -le '$a = "NaN"; print "NaN support here" if $a != $a'
       (Note that the bigint, bigrat, and bignum pragmas all support "NaN".)
       Binary "eq" returns true if the left argument is stringwise equal to
       the right argument.
       Binary "ne" returns true if the left argument is stringwise not equal
       to the right argument.
       Binary "cmp" returns -1, 0, or 1 depending on whether the left argument
       is stringwise less than, equal to, or greater than the right argument.
       Binary "~~" does a smartmatch between its arguments.  Smart matching is
       described in the next section.
       "lt", "le", "ge", "gt" and "cmp" use the collation (sort) order
       specified by the current locale if a legacy "use locale" (but not "use
       locale ':not_characters'") is in effect.  See perllocale.  Do not mix
       these with Unicode, only with legacy binary encodings.  The standard
       Unicode::Collate and Unicode::Collate::Locale modules offer much more
       powerful solutions to collation issues.
   Smartmatch Operator
       First available in Perl 5.10.1 (the 5.10.0 version behaved
       differently), binary "~~" does a "smartmatch" between its arguments.
       This is mostly used implicitly in the "when" construct described in
       perlsyn, although not all "when" clauses call the smartmatch operator.
       Unique among all of Perl's operators, the smartmatch operator can
       recurse.
       It is also unique in that all other Perl operators impose a context
       (usually string or numeric context) on their operands, autoconverting
       those operands to those imposed contexts.  In contrast, smartmatch
       infers contexts from the actual types of its operands and uses that
       type information to select a suitable comparison mechanism.
       The "~~" operator compares its operands "polymorphically", determining
       how to compare them according to their actual types (numeric, string,
       array, hash, etc.)  Like the equality operators with which it shares
       the same precedence, "~~" returns 1 for true and "" for false.  It is
       often best read aloud as "in", "inside of", or "is contained in",
       because the left operand is often looked for inside the right operand.
       That makes the order of the operands to the smartmatch operand often
       opposite that of the regular match operator.  In other words, the
       "smaller" thing is usually placed in the left operand and the larger
       one in the right.
       The behavior of a smartmatch depends on what type of things its
       arguments are, as determined by the following table.  The first row of
       the table whose types apply determines the smartmatch behavior.
       Because what actually happens is mostly determined by the type of the
       second operand, the table is sorted on the right operand instead of on
       the left.
        Left      Right      Description and pseudocode
        ===============================================================
        Any       undef      check whether Any is undefined
                       like: !defined Any
        Any       Object     invoke ~~ overloading on Object, or die
        Right operand is an ARRAY:
        Left      Right      Description and pseudocode
        ===============================================================
        ARRAY1    ARRAY2     recurse on paired elements of ARRAY1 and ARRAY2[2]
                       like: (ARRAY1[0] ~~ ARRAY2[0])
                               && (ARRAY1[1] ~~ ARRAY2[1]) && ...
        HASH      ARRAY      any ARRAY elements exist as HASH keys
                       like: grep { exists HASH->{$_} } ARRAY
        Regexp    ARRAY      any ARRAY elements pattern match Regexp
                       like: grep { /Regexp/ } ARRAY
        undef     ARRAY      undef in ARRAY
                       like: grep { !defined } ARRAY
        Any       ARRAY      smartmatch each ARRAY element[3]
                       like: grep { Any ~~ $_ } ARRAY
        Right operand is a HASH:
        Left      Right      Description and pseudocode
        ===============================================================
        HASH1     HASH2      all same keys in both HASHes
                       like: keys HASH1 ==
                                grep { exists HASH2->{$_} } keys HASH1
        ARRAY     HASH       any ARRAY elements exist as HASH keys
                       like: grep { exists HASH->{$_} } ARRAY
        Regexp    HASH       any HASH keys pattern match Regexp
                       like: grep { /Regexp/ } keys HASH
        undef     HASH       always false (undef can't be a key)
                       like: 0 == 1
        Any       HASH       HASH key existence
                       like: exists HASH->{Any}
        Right operand is CODE:
        Left      Right      Description and pseudocode
        ===============================================================
        ARRAY     CODE       sub returns true on all ARRAY elements[1]
                       like: !grep { !CODE->($_) } ARRAY
        HASH      CODE       sub returns true on all HASH keys[1]
                       like: !grep { !CODE->($_) } keys HASH
        Any       CODE       sub passed Any returns true
                       like: CODE->(Any)
       Right operand is a Regexp:
        Left      Right      Description and pseudocode
        ===============================================================
        ARRAY     Regexp     any ARRAY elements match Regexp
                       like: grep { /Regexp/ } ARRAY
        HASH      Regexp     any HASH keys match Regexp
                       like: grep { /Regexp/ } keys HASH
        Any       Regexp     pattern match
                       like: Any =~ /Regexp/
        Other:
        Left      Right      Description and pseudocode
        ===============================================================
        Object    Any        invoke ~~ overloading on Object,
                             or fall back to...
        Any       Num        numeric equality
                        like: Any == Num
        Num       nummy[4]    numeric equality
                        like: Num == nummy
        undef     Any        check whether undefined
                        like: !defined(Any)
        Any       Any        string equality
                        like: Any eq Any
       Notes:
       1. Empty hashes or arrays match.
       2. That is, each element smartmatches the element of the same index in
       the other array.[3]
       3. If a circular reference is found, fall back to referential equality.
       4. Either an actual number, or a string that looks like one.
       The smartmatch implicitly dereferences any non-blessed hash or array
       reference, so the "HASH" and "ARRAY" entries apply in those cases.  For
       blessed references, the "Object" entries apply.  Smartmatches involving
       hashes only consider hash keys, never hash values.
       The "like" code entry is not always an exact rendition.  For example,
       the smartmatch operator short-circuits whenever possible, but "grep"
       does not.  Also, "grep" in scalar context returns the number of
       matches, but "~~" returns only true or false.
       Unlike most operators, the smartmatch operator knows to treat "undef"
       specially:
           use v5.10.1;
           @array = (1, 2, 3, undef, 4, 5);
           say "some elements undefined" if undef ~~ @array;
       Each operand is considered in a modified scalar context, the
       modification being that array and hash variables are passed by
       reference to the operator, which implicitly dereferences them.  Both
       elements of each pair are the same:
           use v5.10.1;
           my %hash = (red    => 1, blue   => 2, green  => 3,
                       orange => 4, yellow => 5, purple => 6,
                       black  => 7, grey   => 8, white  => 9);
           my @array = qw(red blue green);
           say "some array elements in hash keys" if  @array ~~  %hash;
           say "some array elements in hash keys" if \@array ~~ \%hash;
           say "red in array" if "red" ~~  @array;
           say "red in array" if "red" ~~ \@array;
           say "some keys end in e" if /e$/ ~~  %hash;
           say "some keys end in e" if /e$/ ~~ \%hash;
       Two arrays smartmatch if each element in the first array smartmatches
       (that is, is "in") the corresponding element in the second array,
       recursively.
           use v5.10.1;
           my @little = qw(red blue green);
           my @bigger = ("red", "blue", [ "orange", "green" ] );
           if (@little ~~ @bigger) {  # true!
               say "little is contained in bigger";
           }
       Because the smartmatch operator recurses on nested arrays, this will
       still report that "red" is in the array.
           use v5.10.1;
           my @array = qw(red blue green);
           my $nested_array = [[[[[[[ @array ]]]]]]];
           say "red in array" if "red" ~~ $nested_array;
       If two arrays smartmatch each other, then they are deep copies of each
       others' values, as this example reports:
           use v5.12.0;
           my @a = (0, 1, 2, [3, [4, 5], 6], 7);
           my @b = (0, 1, 2, [3, [4, 5], 6], 7);
           if (@a ~~ @b && @b ~~ @a) {
               say "a and b are deep copies of each other";
           }
           elsif (@a ~~ @b) {
               say "a smartmatches in b";
           }
           elsif (@b ~~ @a) {
               say "b smartmatches in a";
           }
           else {
               say "a and b don't smartmatch each other at all";
           }
       If you were to set "$b[3] = 4", then instead of reporting that "a and b
       are deep copies of each other", it now reports that "b smartmatches in
       a".  That because the corresponding position in @a contains an array
       that (eventually) has a 4 in it.
       Smartmatching one hash against another reports whether both contain the
       same keys, no more and no less. This could be used to see whether two
       records have the same field names, without caring what values those
       fields might have.  For example:
           use v5.10.1;
           sub make_dogtag {
               state $REQUIRED_FIELDS = { name=>1, rank=>1, serial_num=>1 };
               my ($class, $init_fields) = @_;
               die "Must supply (only) name, rank, and serial number"
                   unless $init_fields ~~ $REQUIRED_FIELDS;
               ...
           }
       or, if other non-required fields are allowed, use ARRAY ~~ HASH:
           use v5.10.1;
           sub make_dogtag {
               state $REQUIRED_FIELDS = { name=>1, rank=>1, serial_num=>1 };
               my ($class, $init_fields) = @_;
               die "Must supply (at least) name, rank, and serial number"
                   unless [keys %{$init_fields}] ~~ $REQUIRED_FIELDS;
               ...
           }
       The smartmatch operator is most often used as the implicit operator of
       a "when" clause.  See the section on "Switch Statements" in perlsyn.
       Smartmatching of Objects
       To avoid relying on an object's underlying representation, if the
       smartmatch's right operand is an object that doesn't overload "~~", it
       raises the exception ""Smartmatching a non-overloaded object breaks
       encapsulation"". That's because one has no business digging around to
       see whether something is "in" an object. These are all illegal on
       objects without a "~~" overload:
           %hash ~~ $object
              42 ~~ $object
          "fred" ~~ $object
       However, you can change the way an object is smartmatched by
       overloading the "~~" operator. This is allowed to extend the usual
       smartmatch semantics.  For objects that do have an "~~" overload, see
       overload.
       Using an object as the left operand is allowed, although not very
       useful.  Smartmatching rules take precedence over overloading, so even
       if the object in the left operand has smartmatch overloading, this will
       be ignored.  A left operand that is a non-overloaded object falls back
       on a string or numeric comparison of whatever the "ref" operator
       returns.  That means that
           $object ~~ X
       does not invoke the overload method with "X" as an argument.  Instead
       the above table is consulted as normal, and based on the type of "X",
       overloading may or may not be invoked.  For simple strings or numbers,
       in becomes equivalent to this:
           $object ~~ $number          ref($object) == $number
           $object ~~ $string          ref($object) eq $string
       For example, this reports that the handle smells IOish (but please
       don't really do this!):
           use IO::Handle;
           my $fh = IO::Handle->new();
           if ($fh ~~ /\bIO\b/) {
               say "handle smells IOish";
           }
       That's because it treats $fh as a string like
       "IO::Handle=GLOB(0x8039e0)", then pattern matches against that.
   Bitwise And
       Binary "&" returns its operands ANDed together bit by bit.  (See also
       "Integer Arithmetic" and "Bitwise String Operators".)
       Note that "&" has lower priority than relational operators, so for
       example the parentheses are essential in a test like
           print "Even\n" if ($x & 1) == 0;
   Bitwise Or and Exclusive Or
       Binary "|" returns its operands ORed together bit by bit.  (See also
       "Integer Arithmetic" and "Bitwise String Operators".)
       Binary "^" returns its operands XORed together bit by bit.  (See also
       "Integer Arithmetic" and "Bitwise String Operators".)
       Note that "|" and "^" have lower priority than relational operators, so
       for example the brackets are essential in a test like
           print "false\n" if (8 | 2) != 10;
   C-style Logical And
       Binary "&&" performs a short-circuit logical AND operation.  That is,
       if the left operand is false, the right operand is not even evaluated.
       Scalar or list context propagates down to the right operand if it is
       evaluated.
   C-style Logical Or
       Binary "||" performs a short-circuit logical OR operation.  That is, if
       the left operand is true, the right operand is not even evaluated.
       Scalar or list context propagates down to the right operand if it is
       evaluated.
   Logical Defined-Or
       Although it has no direct equivalent in C, Perl's "//" operator is
       related to its C-style or.  In fact, it's exactly the same as "||",
       except that it tests the left hand side's definedness instead of its
       truth.  Thus, "EXPR1 // EXPR2" returns the value of "EXPR1" if it's
       defined, otherwise, the value of "EXPR2" is returned. ("EXPR1" is
       evaluated in scalar context, "EXPR2" in the context of "//" itself).
       Usually, this is the same result as "defined(EXPR1) ? EXPR1 : EXPR2"
       (except that the ternary-operator form can be used as a lvalue, while
       "EXPR1 // EXPR2" cannot). This is very useful for providing default
       values for variables.  If you actually want to test if at least one of
       $a and $b is defined, use "defined($a // $b)".
       The "||", "//" and "&&" operators return the last value evaluated
       (unlike C's "||" and "&&", which return 0 or 1). Thus, a reasonably
       portable way to find out the home directory might be:
           $home =  $ENV{HOME}
                 // $ENV{LOGDIR}
                 // (getpwuid($<))[7]
                 // die "You're homeless!\n";
       In particular, this means that you shouldn't use this for selecting
       between two aggregates for assignment:
           @a = @b || @c;              # this is wrong
           @a = scalar(@b) || @c;      # really meant this
           @a = @b ? @b : @c;          # this works fine, though
       As alternatives to "&&" and "||" when used for control flow, Perl
       provides the "and" and "or" operators (see below).  The short-circuit
       behavior is identical.  The precedence of "and" and "or" is much lower,
       however, so that you can safely use them after a list operator without
       the need for parentheses:
           unlink "alpha", "beta", "gamma"
                   or gripe(), next LINE;
       With the C-style operators that would have been written like this:
           unlink("alpha", "beta", "gamma")
                   || (gripe(), next LINE);
       It would be even more readable to write that this way:
           unless(unlink("alpha", "beta", "gamma")) {
               gripe();
               next LINE;
           }
       Using "or" for assignment is unlikely to do what you want; see below.
   Range Operators
       Binary ".." is the range operator, which is really two different
       operators depending on the context.  In list context, it returns a list
       of values counting (up by ones) from the left value to the right value.
       If the left value is greater than the right value then it returns the
       empty list.  The range operator is useful for writing "foreach (1..10)"
       loops and for doing slice operations on arrays. In the current
       implementation, no temporary array is created when the range operator
       is used as the expression in "foreach" loops, but older versions of
       Perl might burn a lot of memory when you write something like this:
           for (1 .. 1_000_000) {
               # code
           }
       The range operator also works on strings, using the magical auto-
       increment, see below.
       In scalar context, ".." returns a boolean value.  The operator is
       bistable, like a flip-flop, and emulates the line-range (comma)
       operator of sed, awk, and various editors. Each ".." operator maintains
       its own boolean state, even across calls to a subroutine that contains
       it. It is false as long as its left operand is false.  Once the left
       operand is true, the range operator stays true until the right operand
       is true, AFTER which the range operator becomes false again.  It
       doesn't become false till the next time the range operator is
       evaluated.  It can test the right operand and become false on the same
       evaluation it became true (as in awk), but it still returns true once.
       If you don't want it to test the right operand until the next
       evaluation, as in sed, just use three dots ("...") instead of two.  In
       all other regards, "..." behaves just like ".." does.
       The right operand is not evaluated while the operator is in the "false"
       state, and the left operand is not evaluated while the operator is in
       the "true" state.  The precedence is a little lower than || and &&.
       The value returned is either the empty string for false, or a sequence
       number (beginning with 1) for true.  The sequence number is reset for
       each range encountered.  The final sequence number in a range has the
       string "E0" appended to it, which doesn't affect its numeric value, but
       gives you something to search for if you want to exclude the endpoint.
       You can exclude the beginning point by waiting for the sequence number
       to be greater than 1.
       If either operand of scalar ".." is a constant expression, that operand
       is considered true if it is equal ("==") to the current input line
       number (the $. variable).
       To be pedantic, the comparison is actually "int(EXPR) == int(EXPR)",
       but that is only an issue if you use a floating point expression; when
       implicitly using $. as described in the previous paragraph, the
       comparison is "int(EXPR) == int($.)" which is only an issue when $.  is
       set to a floating point value and you are not reading from a file.
       Furthermore, "span" .. "spat" or "2.18 .. 3.14" will not do what you
       want in scalar context because each of the operands are evaluated using
       their integer representation.
       Examples:
       As a scalar operator:
           if (101 .. 200) { print; } # print 2nd hundred lines, short for
                                      #  if ($. == 101 .. $. == 200) { print; }
           next LINE if (1 .. /^$/);  # skip header lines, short for
                                      #   next LINE if ($. == 1 .. /^$/);
                                      # (typically in a loop labeled LINE)
           s/^/> / if (/^$/ .. eof());  # quote body
           # parse mail messages
           while (<>) {
               $in_header =   1  .. /^$/;
               $in_body   = /^$/ .. eof;
               if ($in_header) {
                   # do something
               } else { # in body
                   # do something else
               }
           } continue {
               close ARGV if eof;             # reset $. each file
           }
       Here's a simple example to illustrate the difference between the two
       range operators:
           @lines = ("   - Foo",
                     "01 - Bar",
                     "1  - Baz",
                     "   - Quux");
           foreach (@lines) {
               if (/0/ .. /1/) {
                   print "$_\n";
               }
           }
       This program will print only the line containing "Bar". If the range
       operator is changed to "...", it will also print the "Baz" line.
       And now some examples as a list operator:
           for (101 .. 200) { print }      # print $_ 100 times
           @foo = @foo[0 .. $#foo];        # an expensive no-op
           @foo = @foo[$#foo-4 .. $#foo];  # slice last 5 items
       The range operator (in list context) makes use of the magical auto-
       increment algorithm if the operands are strings.  You can say
           @alphabet = ("A" .. "Z");
       to get all normal letters of the English alphabet, or
           $hexdigit = (0 .. 9, "a" .. "f")[$num & 15];
       to get a hexadecimal digit, or
           @z2 = ("01" .. "31");
           print $z2[$mday];
       to get dates with leading zeros.
       If the final value specified is not in the sequence that the magical
       increment would produce, the sequence goes until the next value would
       be longer than the final value specified.
       If the initial value specified isn't part of a magical increment
       sequence (that is, a non-empty string matching "/^[a-zA-Z]*[0-9]*\z/"),
       only the initial value will be returned.  So the following will only
       return an alpha:
           use charnames "greek";
           my @greek_small =  ("\N{alpha}" .. "\N{omega}");
       To get the 25 traditional lowercase Greek letters, including both
       sigmas, you could use this instead:
           use charnames "greek";
           my @greek_small =  map { chr } ( ord("\N{alpha}")
                                               ..
                                            ord("\N{omega}")
                                          );
       However, because there are many other lowercase Greek characters than
       just those, to match lowercase Greek characters in a regular
       expression, you would use the pattern "/(?:(?=\p{Greek})\p{Lower})+/".
       Because each operand is evaluated in integer form, "2.18 .. 3.14" will
       return two elements in list context.
           @list = (2.18 .. 3.14); # same as @list = (2 .. 3);
   Conditional Operator
       Ternary "?:" is the conditional operator, just as in C.  It works much
       like an if-then-else.  If the argument before the ? is true, the
       argument before the : is returned, otherwise the argument after the :
       is returned.  For example:
           printf "I have %d dog%s.\n", $n,
                   ($n == 1) ? "" : "s";
       Scalar or list context propagates downward into the 2nd or 3rd
       argument, whichever is selected.
           $a = $ok ? $b : $c;  # get a scalar
           @a = $ok ? @b : @c;  # get an array
           $a = $ok ? @b : @c;  # oops, that's just a count!
       The operator may be assigned to if both the 2nd and 3rd arguments are
       legal lvalues (meaning that you can assign to them):
           ($a_or_b ? $a : $b) = $c;
       Because this operator produces an assignable result, using assignments
       without parentheses will get you in trouble.  For example, this:
           $a % 2 ? $a += 10 : $a += 2
       Really means this:
           (($a % 2) ? ($a += 10) : $a) += 2
       Rather than this:
           ($a % 2) ? ($a += 10) : ($a += 2)
       That should probably be written more simply as:
           $a += ($a % 2) ? 10 : 2;
   Assignment Operators
       "=" is the ordinary assignment operator.
       Assignment operators work as in C.  That is,
           $a += 2;
       is equivalent to
           $a = $a + 2;
       although without duplicating any side effects that dereferencing the
       lvalue might trigger, such as from tie().  Other assignment operators
       work similarly.  The following are recognized:
           **=    +=    *=    &=    <<=    &&=
                  -=    /=    |=    >>=    ||=
                  .=    %=    ^=           //=
                        x=
       Although these are grouped by family, they all have the precedence of
       assignment.
       Unlike in C, the scalar assignment operator produces a valid lvalue.
       Modifying an assignment is equivalent to doing the assignment and then
       modifying the variable that was assigned to.  This is useful for
       modifying a copy of something, like this:
           ($tmp = $global) =~ tr/13579/24680/;
       Although as of 5.14, that can be also be accomplished this way:
           use v5.14;
           $tmp = ($global =~  tr/13579/24680/r);
       Likewise,
           ($a += 2) *= 3;
       is equivalent to
           $a += 2;
           $a *= 3;
       Similarly, a list assignment in list context produces the list of
       lvalues assigned to, and a list assignment in scalar context returns
       the number of elements produced by the expression on the right hand
       side of the assignment.
   Comma Operator
       Binary "," is the comma operator.  In scalar context it evaluates its
       left argument, throws that value away, then evaluates its right
       argument and returns that value.  This is just like C's comma operator.
       In list context, it's just the list argument separator, and inserts
       both its arguments into the list.  These arguments are also evaluated
       from left to right.
       The "=>" operator is a synonym for the comma except that it causes a
       word on its left to be interpreted as a string if it begins with a
       letter or underscore and is composed only of letters, digits and
       underscores.  This includes operands that might otherwise be
       interpreted as operators, constants, single number v-strings or
       function calls. If in doubt about this behavior, the left operand can
       be quoted explicitly.
       Otherwise, the "=>" operator behaves exactly as the comma operator or
       list argument separator, according to context.
       For example:
           use constant FOO => "something";
           my %h = ( FOO => 23 );
       is equivalent to:
           my %h = ("FOO", 23);
       It is NOT:
           my %h = ("something", 23);
       The "=>" operator is helpful in documenting the correspondence between
       keys and values in hashes, and other paired elements in lists.
           %hash = ( $key => $value );
           login( $username => $password );
       The special quoting behavior ignores precedence, and hence may apply to
       part of the left operand:
           print time.shift => "bbb";
       That example prints something like "1314363215shiftbbb", because the
       "=>" implicitly quotes the "shift" immediately on its left, ignoring
       the fact that "time.shift" is the entire left operand.
   List Operators (Rightward)
       On the right side of a list operator, the comma has very low
       precedence, such that it controls all comma-separated expressions found
       there.  The only operators with lower precedence are the logical
       operators "and", "or", and "not", which may be used to evaluate calls
       to list operators without the need for parentheses:
           open HANDLE, "< :utf8", "filename" or die "Can't open: $!\n";
       However, some people find that code harder to read than writing it with
       parentheses:
           open(HANDLE, "< :utf8", "filename") or die "Can't open: $!\n";
       in which case you might as well just use the more customary "||"
       operator:
           open(HANDLE, "< :utf8", "filename") || die "Can't open: $!\n";
       See also discussion of list operators in "Terms and List Operators
       (Leftward)".
   Logical Not
       Unary "not" returns the logical negation of the expression to its
       right.  It's the equivalent of "!" except for the very low precedence.
   Logical And
       Binary "and" returns the logical conjunction of the two surrounding
       expressions.  It's equivalent to "&&" except for the very low
       precedence.  This means that it short-circuits: the right expression is
       evaluated only if the left expression is true.
   Logical or and Exclusive Or
       Binary "or" returns the logical disjunction of the two surrounding
       expressions.  It's equivalent to "||" except for the very low
       precedence.  This makes it useful for control flow:
           print FH $data              or die "Can't write to FH: $!";
       This means that it short-circuits: the right expression is evaluated
       only if the left expression is false.  Due to its precedence, you must
       be careful to avoid using it as replacement for the "||" operator.  It
       usually works out better for flow control than in assignments:
           $a = $b or $c;              # bug: this is wrong
           ($a = $b) or $c;            # really means this
           $a = $b || $c;              # better written this way
       However, when it's a list-context assignment and you're trying to use
       "||" for control flow, you probably need "or" so that the assignment
       takes higher precedence.
           @info = stat($file) || die;     # oops, scalar sense of stat!
           @info = stat($file) or die;     # better, now @info gets its due
       Then again, you could always use parentheses.
       Binary "xor" returns the exclusive-OR of the two surrounding
       expressions.  It cannot short-circuit (of course).
       There is no low precedence operator for defined-OR.
   C Operators Missing From Perl
       Here is what C has that Perl doesn't:
       unary & Address-of operator.  (But see the "\" operator for taking a
               reference.)
       unary * Dereference-address operator. (Perl's prefix dereferencing
               operators are typed: $, @, %, and &.)
       (TYPE)  Type-casting operator.
   Quote and Quote-like Operators
       While we usually think of quotes as literal values, in Perl they
       function as operators, providing various kinds of interpolating and
       pattern matching capabilities.  Perl provides customary quote
       characters for these behaviors, but also provides a way for you to
       choose your quote character for any of them.  In the following table, a
       "{}" represents any pair of delimiters you choose.
           Customary  Generic        Meaning        Interpolates
               ''       q{}          Literal             no
               ""      qq{}          Literal             yes
               ``      qx{}          Command             yes*
                       qw{}         Word list            no
               //       m{}       Pattern match          yes*
                       qr{}          Pattern             yes*
                        s{}{}      Substitution          yes*
                       tr{}{}    Transliteration         no (but see below)
                        y{}{}    Transliteration         no (but see below)
               <<EOF                 here-doc            yes*
               * unless the delimiter is ''.
       Non-bracketing delimiters use the same character fore and aft, but the
       four sorts of ASCII brackets (round, angle, square, curly) all nest,
       which means that
           q{foo{bar}baz}
       is the same as
           'foo{bar}baz'
       Note, however, that this does not always work for quoting Perl code:
           $s = q{ if($a eq "}") ... }; # WRONG
       is a syntax error. The "Text::Balanced" module (standard as of v5.8,
       and from CPAN before then) is able to do this properly.
       There can be whitespace between the operator and the quoting
       characters, except when "#" is being used as the quoting character.
       "q#foo#" is parsed as the string "foo", while "q #foo#" is the operator
       "q" followed by a comment.  Its argument will be taken from the next
       line.  This allows you to write:
           s {foo}  # Replace foo
             {bar}  # with bar.
       The following escape sequences are available in constructs that
       interpolate, and in transliterations:
           Sequence     Note  Description
           \t                  tab               (HT, TAB)
           \n                  newline           (NL)
           \r                  return            (CR)
           \f                  form feed         (FF)
           \b                  backspace         (BS)
           \a                  alarm (bell)      (BEL)
           \e                  escape            (ESC)
           \x{263A}     [1,8]  hex char          (example: SMILEY)
           \x1b         [2,8]  restricted range hex char (example: ESC)
           \N{name}     [3]    named Unicode character or character sequence
           \N{U+263D}   [4,8]  Unicode character (example: FIRST QUARTER MOON)
           \c[          [5]    control char      (example: chr(27))
           \o{23072}    [6,8]  octal char        (example: SMILEY)
           \033         [7,8]  restricted range octal char  (example: ESC)
       [1] The result is the character specified by the hexadecimal number
           between the braces.  See "[8]" below for details on which
           character.
           Only hexadecimal digits are valid between the braces. If an invalid
           character is encountered, a warning will be issued and the invalid
           character and all subsequent characters (valid or invalid) within
           the braces will be discarded.
           If there are no valid digits between the braces, the generated
           character is the NULL character ("\x{00}").  However, an explicit
           empty brace ("\x{}") will not cause a warning (currently).
       [2] The result is the character specified by the hexadecimal number in
           the range 0x00 to 0xFF.  See "[8]" below for details on which
           character.
           Only hexadecimal digits are valid following "\x".  When "\x" is
           followed by fewer than two valid digits, any valid digits will be
           zero-padded.  This means that "\x7" will be interpreted as "\x07",
           and a lone <\x> will be interpreted as "\x00".  Except at the end
           of a string, having fewer than two valid digits will result in a
           warning.  Note that although the warning says the illegal character
           is ignored, it is only ignored as part of the escape and will still
           be used as the subsequent character in the string.  For example:
             Original    Result    Warns?
             "\x7"       "\x07"    no
             "\x"        "\x00"    no
             "\x7q"      "\x07q"   yes
             "\xq"       "\x00q"   yes
       [3] The result is the Unicode character or character sequence given by
           name.  See charnames.
       [4] "\N{U+hexadecimal number}" means the Unicode character whose
           Unicode code point is hexadecimal number.
       [5] The character following "\c" is mapped to some other character as
           shown in the table:
            Sequence   Value
              \c@      chr(0)
              \cA      chr(1)
              \ca      chr(1)
              \cB      chr(2)
              \cb      chr(2)
              ...
              \cZ      chr(26)
              \cz      chr(26)
              \c[      chr(27)
              \c]      chr(29)
              \c^      chr(30)
              \c?      chr(127)
           In other words, it's the character whose code point has had 64
           xor'd with its uppercase.  "\c?" is DELETE because "ord("@") ^ 64"
           is 127, and "\c@" is NULL because the ord of "@" is 64, so xor'ing
           64 itself produces 0.
           Also, "\c\X" yields " chr(28) . "X"" for any X, but cannot come at
           the end of a string, because the backslash would be parsed as
           escaping the end quote.
           On ASCII platforms, the resulting characters from the list above
           are the complete set of ASCII controls.  This isn't the case on
           EBCDIC platforms; see "OPERATOR DIFFERENCES" in perlebcdic for the
           complete list of what these sequences mean on both ASCII and EBCDIC
           platforms.
           Use of any other character following the "c" besides those listed
           above is discouraged, and some are deprecated with the intention of
           removing those in a later Perl version.  What happens for any of
           these other characters currently though, is that the value is
           derived by xor'ing with the seventh bit, which is 64.
           To get platform independent controls, you can use "\N{...}".
       [6] The result is the character specified by the octal number between
           the braces.  See "[8]" below for details on which character.
           If a character that isn't an octal digit is encountered, a warning
           is raised, and the value is based on the octal digits before it,
           discarding it and all following characters up to the closing brace.
           It is a fatal error if there are no octal digits at all.
       [7] The result is the character specified by the three-digit octal
           number in the range 000 to 777 (but best to not use above 077, see
           next paragraph).  See "[8]" below for details on which character.
           Some contexts allow 2 or even 1 digit, but any usage without
           exactly three digits, the first being a zero, may give unintended
           results.  (For example, in a regular expression it may be confused
           with a backreference; see "Octal escapes" in perlrebackslash.)
           Starting in Perl 5.14, you may use "\o{}" instead, which avoids all
           these problems.  Otherwise, it is best to use this construct only
           for ordinals "\077" and below, remembering to pad to the left with
           zeros to make three digits.  For larger ordinals, either use
           "\o{}", or convert to something else, such as to hex and use "\x{}"
           instead.
           Having fewer than 3 digits may lead to a misleading warning message
           that says that what follows is ignored.  For example, "\128" in the
           ASCII character set is equivalent to the two characters "\n8", but
           the warning "Illegal octal digit '8' ignored" will be thrown.  If
           "\n8" is what you want, you can avoid this warning by padding your
           octal number with 0's: "\0128".
       [8] Several constructs above specify a character by a number.  That
           number gives the character's position in the character set encoding
           (indexed from 0).  This is called synonymously its ordinal, code
           position, or code point.  Perl works on platforms that have a
           native encoding currently of either ASCII/Latin1 or EBCDIC, each of
           which allow specification of 256 characters.  In general, if the
           number is 255 (0xFF, 0377) or below, Perl interprets this in the
           platform's native encoding.  If the number is 256 (0x100, 0400) or
           above, Perl interprets it as a Unicode code point and the result is
           the corresponding Unicode character.  For example "\x{50}" and
           "\o{120}" both are the number 80 in decimal, which is less than
           256, so the number is interpreted in the native character set
           encoding.  In ASCII the character in the 80th position (indexed
           from 0) is the letter "P", and in EBCDIC it is the ampersand symbol
           "&".  "\x{100}" and "\o{400}" are both 256 in decimal, so the
           number is interpreted as a Unicode code point no matter what the
           native encoding is.  The name of the character in the 256th
           position (indexed by 0) in Unicode is "LATIN CAPITAL LETTER A WITH
           MACRON".
           There are a couple of exceptions to the above rule.
           "\N{U+hex number}" is always interpreted as a Unicode code point,
           so that "\N{U+0050}" is "P" even on EBCDIC platforms.  And if
           "use encoding" is in effect, the number is considered to be in that
           encoding, and is translated from that into the platform's native
           encoding if there is a corresponding native character; otherwise to
           Unicode.
       NOTE: Unlike C and other languages, Perl has no "\v" escape sequence
       for the vertical tab (VT - ASCII 11), but you may use "\ck" or "\x0b".
       ("\v" does have meaning in regular expression patterns in Perl, see
       perlre.)
       The following escape sequences are available in constructs that
       interpolate, but not in transliterations.
           \l          lowercase next character only
           \u          titlecase (not uppercase!) next character only
           \L          lowercase all characters till \E or end of string
           \U          uppercase all characters till \E or end of string
           \F          foldcase all characters till \E or end of string
           \Q          quote (disable) pattern metacharacters till \E or
                       end of string
           \E          end either case modification or quoted section
                       (whichever was last seen)
       See "quotemeta" in perlfunc for the exact definition of characters that
       are quoted by "\Q".
       "\L", "\U", "\F", and "\Q" can stack, in which case you need one "\E"
       for each.  For example:
        say"This \Qquoting \ubusiness \Uhere isn't quite\E done yet,\E is it?";
        This quoting\ Business\ HERE\ ISN\'T\ QUITE\ done\ yet\, is it?
       If "use locale" is in effect (but not "use locale ':not_characters'"),
       the case map used by "\l", "\L", "\u", and "\U" is taken from the
       current locale.  See perllocale.  If Unicode (for example, "\N{}" or
       code points of 0x100 or beyond) is being used, the case map used by
       "\l", "\L", "\u", and "\U" is as defined by Unicode.  That means that
       case-mapping a single character can sometimes produce several
       characters.  Under "use locale", "\F" produces the same results as
       "\L".
       All systems use the virtual "\n" to represent a line terminator, called
       a "newline".  There is no such thing as an unvarying, physical newline
       character.  It is only an illusion that the operating system, device
       drivers, C libraries, and Perl all conspire to preserve.  Not all
       systems read "\r" as ASCII CR and "\n" as ASCII LF.  For example, on
       the ancient Macs (pre-MacOS X) of yesteryear, these used to be
       reversed, and on systems without line terminator, printing "\n" might
       emit no actual data.  In general, use "\n" when you mean a "newline"
       for your system, but use the literal ASCII when you need an exact
       character.  For example, most networking protocols expect and prefer a
       CR+LF ("\015\012" or "\cM\cJ") for line terminators, and although they
       often accept just "\012", they seldom tolerate just "\015".  If you get
       in the habit of using "\n" for networking, you may be burned some day.
       For constructs that do interpolate, variables beginning with ""$"" or
       ""@"" are interpolated.  Subscripted variables such as $a[3] or
       "$href->{key}[0]" are also interpolated, as are array and hash slices.
       But method calls such as "$obj->meth" are not.
       Interpolating an array or slice interpolates the elements in order,
       separated by the value of $", so is equivalent to interpolating "join
       $", @array".  "Punctuation" arrays such as "@*" are usually
       interpolated only if the name is enclosed in braces "@{*}", but the
       arrays @_, "@+", and "@-" are interpolated even without braces.
       For double-quoted strings, the quoting from "\Q" is applied after
       interpolation and escapes are processed.
           "abc\Qfoo\tbar$s\Exyz"
       is equivalent to
           "abc" . quotemeta("foo\tbar$s") . "xyz"
       For the pattern of regex operators ("qr//", "m//" and "s///"), the
       quoting from "\Q" is applied after interpolation is processed, but
       before escapes are processed. This allows the pattern to match
       literally (except for "$" and "@"). For example, the following matches:
           '\s\t' =~ /\Q\s\t/
       Because "$" or "@" trigger interpolation, you'll need to use something
       like "/\Quser\E\@\Qhost/" to match them literally.
       Patterns are subject to an additional level of interpretation as a
       regular expression.  This is done as a second pass, after variables are
       interpolated, so that regular expressions may be incorporated into the
       pattern from the variables.  If this is not what you want, use "\Q" to
       interpolate a variable literally.
       Apart from the behavior described above, Perl does not expand multiple
       levels of interpolation.  In particular, contrary to the expectations
       of shell programmers, back-quotes do NOT interpolate within double
       quotes, nor do single quotes impede evaluation of variables when used
       within double quotes.
   Regexp Quote-Like Operators
       Here are the quote-like operators that apply to pattern matching and
       related activities.
       qr/STRING/msixpodual
               This operator quotes (and possibly compiles) its STRING as a
               regular expression.  STRING is interpolated the same way as
               PATTERN in "m/PATTERN/".  If "'" is used as the delimiter, no
               interpolation is done.  Returns a Perl value which may be used
               instead of the corresponding "/STRING/msixpodual" expression.
               The returned value is a normalized version of the original
               pattern. It magically differs from a string containing the same
               characters: "ref(qr/x/)" returns "Regexp"; however,
               dereferencing it is not well defined (you currently get the
               normalized version of the original pattern, but this may
               change).
               For example,
                   $rex = qr/my.STRING/is;
                   print $rex;                 # prints (?si-xm:my.STRING)
                   s/$rex/foo/;
               is equivalent to
                   s/my.STRING/foo/is;
               The result may be used as a subpattern in a match:
                   $re = qr/$pattern/;
                   $string =~ /foo${re}bar/;   # can be interpolated in other patterns
                   $string =~ $re;             # or used standalone
                   $string =~ /$re/;           # or this way
               Since Perl may compile the pattern at the moment of execution
               of the qr() operator, using qr() may have speed advantages in
               some situations, notably if the result of qr() is used
               standalone:
                   sub match {
                       my $patterns = shift;
                       my @compiled = map qr/$_/i, @$patterns;
                       grep {
                           my $success = 0;
                           foreach my $pat (@compiled) {
                               $success = 1, last if /$pat/;
                           }
                           $success;
                       } @_;
                   }
               Precompilation of the pattern into an internal representation
               at the moment of qr() avoids a need to recompile the pattern
               every time a match "/$pat/" is attempted.  (Perl has many other
               internal optimizations, but none would be triggered in the
               above example if we did not use qr() operator.)
               Options (specified by the following modifiers) are:
                   m   Treat string as multiple lines.
                   s   Treat string as single line. (Make . match a newline)
                   i   Do case-insensitive pattern matching.
                   x   Use extended regular expressions.
                   p   When matching preserve a copy of the matched string so
                       that ${^PREMATCH}, ${^MATCH}, ${^POSTMATCH} will be defined.
                   o   Compile pattern only once.
                   a   ASCII-restrict: Use ASCII for \d, \s, \w; specifying two a's
                       further restricts /i matching so that no ASCII character will
                       match a non-ASCII one
                   l   Use the locale
                   u   Use Unicode rules
                   d   Use Unicode or native charset, as in 5.12 and earlier
               If a precompiled pattern is embedded in a larger pattern then
               the effect of "msixpluad" will be propagated appropriately.
               The effect the "o" modifier has is not propagated, being
               restricted to those patterns explicitly using it.
               The last four modifiers listed above, added in Perl 5.14,
               control the character set semantics, but "/a" is the only one
               you are likely to want to specify explicitly; the other three
               are selected automatically by various pragmas.
               See perlre for additional information on valid syntax for
               STRING, and for a detailed look at the semantics of regular
               expressions.  In particular, all modifiers except the largely
               obsolete "/o" are further explained in "Modifiers" in perlre.
               "/o" is described in the next section.
       m/PATTERN/msixpodualgc
       /PATTERN/msixpodualgc
               Searches a string for a pattern match, and in scalar context
               returns true if it succeeds, false if it fails.  If no string
               is specified via the "=~" or "!~" operator, the $_ string is
               searched.  (The string specified with "=~" need not be an
               lvalue--it may be the result of an expression evaluation, but
               remember the "=~" binds rather tightly.)  See also perlre.
               Options are as described in "qr//" above; in addition, the
               following match process modifiers are available:
                g  Match globally, i.e., find all occurrences.
                c  Do not reset search position on a failed match when /g is in effect.
               If "/" is the delimiter then the initial "m" is optional.  With
               the "m" you can use any pair of non-whitespace (ASCII)
               characters as delimiters.  This is particularly useful for
               matching path names that contain "/", to avoid LTS (leaning
               toothpick syndrome).  If "?" is the delimiter, then a match-
               only-once rule applies, described in "m?PATTERN?" below.  If
               "'" is the delimiter, no interpolation is performed on the
               PATTERN.  When using a character valid in an identifier,
               whitespace is required after the "m".
               PATTERN may contain variables, which will be interpolated every
               time the pattern search is evaluated, except for when the
               delimiter is a single quote.  (Note that $(, $), and $| are not
               interpolated because they look like end-of-string tests.)  Perl
               will not recompile the pattern unless an interpolated variable
               that it contains changes.  You can force Perl to skip the test
               and never recompile by adding a "/o" (which stands for "once")
               after the trailing delimiter.  Once upon a time, Perl would
               recompile regular expressions unnecessarily, and this modifier
               was useful to tell it not to do so, in the interests of speed.
               But now, the only reasons to use "/o" are either:
               1.  The variables are thousands of characters long and you know
                   that they don't change, and you need to wring out the last
                   little bit of speed by having Perl skip testing for that.
                   (There is a maintenance penalty for doing this, as
                   mentioning "/o" constitutes a promise that you won't change
                   the variables in the pattern.  If you do change them, Perl
                   won't even notice.)
               2.  you want the pattern to use the initial values of the
                   variables regardless of whether they change or not.  (But
                   there are saner ways of accomplishing this than using
                   "/o".)
               The bottom line is that using "/o" is almost never a good idea.
       The empty pattern //
               If the PATTERN evaluates to the empty string, the last
               successfully matched regular expression is used instead. In
               this case, only the "g" and "c" flags on the empty pattern are
               honored; the other flags are taken from the original pattern.
               If no match has previously succeeded, this will (silently) act
               instead as a genuine empty pattern (which will always match).
               Note that it's possible to confuse Perl into thinking "//" (the
               empty regex) is really "//" (the defined-or operator).  Perl is
               usually pretty good about this, but some pathological cases
               might trigger this, such as "$a///" (is that "($a) / (//)" or
               "$a // /"?) and "print $fh //" ("print $fh(//" or "print($fh
               //"?).  In all of these examples, Perl will assume you meant
               defined-or.  If you meant the empty regex, just use parentheses
               or spaces to disambiguate, or even prefix the empty regex with
               an "m" (so "//" becomes "m//").
       Matching in list context
               If the "/g" option is not used, "m//" in list context returns a
               list consisting of the subexpressions matched by the
               parentheses in the pattern, that is, ($1, $2, $3...).  (Note
               that here $1 etc. are also set, and that this differs from Perl
               4's behavior.)  When there are no parentheses in the pattern,
               the return value is the list "(1)" for success.  With or
               without parentheses, an empty list is returned upon failure.
               Examples:
                   open(TTY, "+</dev/tty")
                       || die "can't access /dev/tty: $!";
                   <TTY> =~ /^y/i && foo();    # do foo if desired
                   if (/Version: *([0-9.]*)/) { $version = $1; }
                   next if m#^/usr/spool/uucp#;
                   # poor man's grep
                   $arg = shift;
                   while (<>) {
                       print if /$arg/o;       # compile only once (no longer needed!)
                   }
                   if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/))
               This last example splits $foo into the first two words and the
               remainder of the line, and assigns those three fields to $F1,
               $F2, and $Etc.  The conditional is true if any variables were
               assigned; that is, if the pattern matched.
               The "/g" modifier specifies global pattern matching--that is,
               matching as many times as possible within the string. How it
               behaves depends on the context. In list context, it returns a
               list of the substrings matched by any capturing parentheses in
               the regular expression. If there are no parentheses, it returns
               a list of all the matched strings, as if there were parentheses
               around the whole pattern.
               In scalar context, each execution of "m//g" finds the next
               match, returning true if it matches, and false if there is no
               further match.  The position after the last match can be read
               or set using the "pos()" function; see "pos" in perlfunc. A
               failed match normally resets the search position to the
               beginning of the string, but you can avoid that by adding the
               "/c" modifier (for example, "m//gc"). Modifying the target
               string also resets the search position.
       \G assertion
               You can intermix "m//g" matches with "m/\G.../g", where "\G" is
               a zero-width assertion that matches the exact position where
               the previous "m//g", if any, left off. Without the "/g"
               modifier, the "\G" assertion still anchors at "pos()" as it was
               at the start of the operation (see "pos" in perlfunc), but the
               match is of course only attempted once. Using "\G" without "/g"
               on a target string that has not previously had a "/g" match
               applied to it is the same as using the "\A" assertion to match
               the beginning of the string.  Note also that, currently, "\G"
               is only properly supported when anchored at the very beginning
               of the pattern.
               Examples:
                   # list context
                   ($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g);
                   # scalar context
                   local $/ = "";
                   while ($paragraph = <>) {
                       while ($paragraph =~ /\p{Ll}['")]*[.!?]+['")]*\s/g) {
                           $sentences++;
                       }
                   }
                   say $sentences;
               Here's another way to check for sentences in a paragraph:
                   my $sentence_rx = qr{
                       (?: (?<= ^ ) | (?<= \s ) )  # after start-of-string or whitespace
                       \p{Lu}                      # capital letter
                       .*?                         # a bunch of anything
                       (?<= \S )                   # that ends in non-whitespace
                       (?<! \b [DMS]r  )           # but isn't a common abbreviation
                       (?<! \b Mrs )
                       (?<! \b Sra )
                       (?<! \b St  )
                       [.?!]                       # followed by a sentence ender
                       (?= $ | \s )                # in front of end-of-string or whitespace
                   }sx;
                   local $/ = "";
                   while (my $paragraph = <>) {
                       say "NEW PARAGRAPH";
                       my $count = 0;
                       while ($paragraph =~ /($sentence_rx)/g) {
                           printf "\tgot sentence %d: <%s>\n", ++$count, $1;
                       }
                   }
               Here's how to use "m//gc" with "\G":
                   $_ = "ppooqppqq";
                   while ($i++ < 2) {
                       print "1: '";
                       print $1 while /(o)/gc; print "', pos=", pos, "\n";
                       print "2: '";
                       print $1 if /\G(q)/gc;  print "', pos=", pos, "\n";
                       print "3: '";
                       print $1 while /(p)/gc; print "', pos=", pos, "\n";
                   }
                   print "Final: '$1', pos=",pos,"\n" if /\G(.)/;
               The last example should print:
                   1: 'oo', pos=4
                   2: 'q', pos=5
                   3: 'pp', pos=7
                   1: '', pos=7
                   2: 'q', pos=8
                   3: '', pos=8
                   Final: 'q', pos=8
               Notice that the final match matched "q" instead of "p", which a
               match without the "\G" anchor would have done. Also note that
               the final match did not update "pos". "pos" is only updated on
               a "/g" match. If the final match did indeed match "p", it's a
               good bet that you're running a very old (pre-5.6.0) version of
               Perl.
               A useful idiom for "lex"-like scanners is "/\G.../gc".  You can
               combine several regexps like this to process a string part-by-
               part, doing different actions depending on which regexp
               matched.  Each regexp tries to match where the previous one
               leaves off.
                $_ = <<'EOL';
                   $url = URI::URL->new( "http://example.com/" ); die if $url eq "xXx";
                EOL
                LOOP: {
                    print(" digits"),       redo LOOP if /\G\d+\b[,.;]?\s*/gc;
                    print(" lowercase"),    redo LOOP if /\G\p{Ll}+\b[,.;]?\s*/gc;
                    print(" UPPERCASE"),    redo LOOP if /\G\p{Lu}+\b[,.;]?\s*/gc;
                    print(" Capitalized"),  redo LOOP if /\G\p{Lu}\p{Ll}+\b[,.;]?\s*/gc;
                    print(" MiXeD"),        redo LOOP if /\G\pL+\b[,.;]?\s*/gc;
                    print(" alphanumeric"), redo LOOP if /\G[\p{Alpha}\pN]+\b[,.;]?\s*/gc;
                    print(" line-noise"),   redo LOOP if /\G\W+/gc;
                    print ". That's all!\n";
                }
               Here is the output (split into several lines):
                   line-noise lowercase line-noise UPPERCASE line-noise UPPERCASE
                   line-noise lowercase line-noise lowercase line-noise lowercase
                   lowercase line-noise lowercase lowercase line-noise lowercase
                   lowercase line-noise MiXeD line-noise. That's all!
       m?PATTERN?msixpodualgc
       ?PATTERN?msixpodualgc
               This is just like the "m/PATTERN/" search, except that it
               matches only once between calls to the reset() operator.  This
               is a useful optimization when you want to see only the first
               occurrence of something in each file of a set of files, for
               instance.  Only "m??"  patterns local to the current package
               are reset.
                   while (<>) {
                       if (m?^$?) {
                                           # blank line between header and body
                       }
                   } continue {
                       reset if eof;       # clear m?? status for next file
                   }
               Another example switched the first "latin1" encoding it finds
               to "utf8" in a pod file:
                   s//utf8/ if m? ^ =encoding \h+ \K latin1 ?x;
               The match-once behavior is controlled by the match delimiter
               being "?"; with any other delimiter this is the normal "m//"
               operator.
               For historical reasons, the leading "m" in "m?PATTERN?" is
               optional, but the resulting "?PATTERN?" syntax is deprecated,
               will warn on usage and might be removed from a future stable
               release of Perl (without further notice!).
       s/PATTERN/REPLACEMENT/msixpodualgcer
               Searches a string for a pattern, and if found, replaces that
               pattern with the replacement text and returns the number of
               substitutions made.  Otherwise it returns false (specifically,
               the empty string).
               If the "/r" (non-destructive) option is used then it runs the
               substitution on a copy of the string and instead of returning
               the number of substitutions, it returns the copy whether or not
               a substitution occurred.  The original string is never changed
               when "/r" is used.  The copy will always be a plain string,
               even if the input is an object or a tied variable.
               If no string is specified via the "=~" or "!~" operator, the $_
               variable is searched and modified.  Unless the "/r" option is
               used, the string specified must be a scalar variable, an array
               element, a hash element, or an assignment to one of those; that
               is, some sort of scalar lvalue.
               If the delimiter chosen is a single quote, no interpolation is
               done on either the PATTERN or the REPLACEMENT.  Otherwise, if
               the PATTERN contains a $ that looks like a variable rather than
               an end-of-string test, the variable will be interpolated into
               the pattern at run-time.  If you want the pattern compiled only
               once the first time the variable is interpolated, use the "/o"
               option.  If the pattern evaluates to the empty string, the last
               successfully executed regular expression is used instead.  See
               perlre for further explanation on these.
               Options are as with m// with the addition of the following
               replacement specific options:
                   e   Evaluate the right side as an expression.
                   ee  Evaluate the right side as a string then eval the result.
                   r   Return substitution and leave the original string untouched.
               Any non-whitespace delimiter may replace the slashes.  Add
               space after the "s" when using a character allowed in
               identifiers.  If single quotes are used, no interpretation is
               done on the replacement string (the "/e" modifier overrides
               this, however).  Unlike Perl 4, Perl 5 treats backticks as
               normal delimiters; the replacement text is not evaluated as a
               command.  If the PATTERN is delimited by bracketing quotes, the
               REPLACEMENT has its own pair of quotes, which may or may not be
               bracketing quotes, for example, "s(foo)(bar)" or "s<foo>/bar/".
               A "/e" will cause the replacement portion to be treated as a
               full-fledged Perl expression and evaluated right then and
               there.  It is, however, syntax checked at compile-time. A
               second "e" modifier will cause the replacement portion to be
               "eval"ed before being run as a Perl expression.
               Examples:
                   s/\bgreen\b/mauve/g;                # don't change wintergreen
                   $path =~ s|/usr/bin|/usr/local/bin|;
                   s/Login: $foo/Login: $bar/; # run-time pattern
                   ($foo = $bar) =~ s/this/that/;      # copy first, then change
                   ($foo = "$bar") =~ s/this/that/;    # convert to string, copy, then change
                   $foo = $bar =~ s/this/that/r;       # Same as above using /r
                   $foo = $bar =~ s/this/that/r
                               =~ s/that/the other/r;  # Chained substitutes using /r
                   @foo = map { s/this/that/r } @bar   # /r is very useful in maps
                   $count = ($paragraph =~ s/Mister\b/Mr./g);  # get change-count
                   $_ = 'abc123xyz';
                   s/\d+/$&*2/e;               # yields 'abc246xyz'
                   s/\d+/sprintf("%5d",$&)/e;  # yields 'abc  246xyz'
                   s/\w/$& x 2/eg;             # yields 'aabbcc  224466xxyyzz'
                   s/%(.)/$percent{$1}/g;      # change percent escapes; no /e
                   s/%(.)/$percent{$1} || $&/ge;       # expr now, so /e
                   s/^=(\w+)/pod($1)/ge;       # use function call
                   $_ = 'abc123xyz';
                   $a = s/abc/def/r;           # $a is 'def123xyz' and
                                               # $_ remains 'abc123xyz'.
                   # expand variables in $_, but dynamics only, using
                   # symbolic dereferencing
                   s/\$(\w+)/${$1}/g;
                   # Add one to the value of any numbers in the string
                   s/(\d+)/1 + $1/eg;
                   # Titlecase words in the last 30 characters only
                   substr($str, -30) =~ s/\b(\p{Alpha}+)\b/\u\L$1/g;
                   # This will expand any embedded scalar variable
                   # (including lexicals) in $_ : First $1 is interpolated
                   # to the variable name, and then evaluated
                   s/(\$\w+)/$1/eeg;
                   # Delete (most) C comments.
                   $program =~ s {
                       /\*     # Match the opening delimiter.
                       .*?     # Match a minimal number of characters.
                       \*/     # Match the closing delimiter.
                   } []gsx;
                   s/^\s*(.*?)\s*$/$1/;        # trim whitespace in $_, expensively
                   for ($variable) {           # trim whitespace in $variable, cheap
                       s/^\s+//;
                       s/\s+$//;
                   }
                   s/([^ ]*) *([^ ]*)/$2 $1/;  # reverse 1st two fields
               Note the use of $ instead of \ in the last example.  Unlike
               sed, we use the \<digit> form in only the left hand side.
               Anywhere else it's $<digit>.
               Occasionally, you can't use just a "/g" to get all the changes
               to occur that you might want.  Here are two common cases:
                   # put commas in the right places in an integer
                   1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/g;
                   # expand tabs to 8-column spacing
                   1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e;
               "s///le" is treated as a substitution followed by the "le"
               operator, not the "/le" flags.  This may change in a future
               version of Perl.  It produces a warning if warnings are
               enabled.  To disambiguate, use a space or change the order of
               the flags:
                   s/foo/bar/ le 5;  # "le" infix operator
                   s/foo/bar/el;     # "e" and "l" flags
   Quote-Like Operators
       q/STRING/
       'STRING'
           A single-quoted, literal string.  A backslash represents a
           backslash unless followed by the delimiter or another backslash, in
           which case the delimiter or backslash is interpolated.
               $foo = q!I said, "You said, 'She said it.'"!;
               $bar = q('This is it.');
               $baz = '\n';                # a two-character string
       qq/STRING/
       "STRING"
           A double-quoted, interpolated string.
               $_ .= qq
                (*** The previous line contains the naughty word "$1".\n)
                           if /\b(tcl|java|python)\b/i;      # :-)
               $baz = "\n";                # a one-character string
       qx/STRING/
       `STRING`
           A string which is (possibly) interpolated and then executed as a
           system command with "/bin/sh" or its equivalent.  Shell wildcards,
           pipes, and redirections will be honored.  The collected standard
           output of the command is returned; standard error is unaffected.
           In scalar context, it comes back as a single (potentially multi-
           line) string, or undef if the command failed.  In list context,
           returns a list of lines (however you've defined lines with $/ or
           $INPUT_RECORD_SEPARATOR), or an empty list if the command failed.
           Because backticks do not affect standard error, use shell file
           descriptor syntax (assuming the shell supports this) if you care to
           address this.  To capture a command's STDERR and STDOUT together:
               $output = `cmd 2>&1`;
           To capture a command's STDOUT but discard its STDERR:
               $output = `cmd 2>/dev/null`;
           To capture a command's STDERR but discard its STDOUT (ordering is
           important here):
               $output = `cmd 2>&1 1>/dev/null`;
           To exchange a command's STDOUT and STDERR in order to capture the
           STDERR but leave its STDOUT to come out the old STDERR:
               $output = `cmd 3>&1 1>&2 2>&3 3>&-`;
           To read both a command's STDOUT and its STDERR separately, it's
           easiest to redirect them separately to files, and then read from
           those files when the program is done:
               system("program args 1>program.stdout 2>program.stderr");
           The STDIN filehandle used by the command is inherited from Perl's
           STDIN.  For example:
               open(SPLAT, "stuff")   || die "can't open stuff: $!";
               open(STDIN, "<&SPLAT") || die "can't dupe SPLAT: $!";
               print STDOUT `sort`;
           will print the sorted contents of the file named "stuff".
           Using single-quote as a delimiter protects the command from Perl's
           double-quote interpolation, passing it on to the shell instead:
               $perl_info  = qx(ps $$);            # that's Perl's $$
               $shell_info = qx'ps $$';            # that's the new shell's $$
           How that string gets evaluated is entirely subject to the command
           interpreter on your system.  On most platforms, you will have to
           protect shell metacharacters if you want them treated literally.
           This is in practice difficult to do, as it's unclear how to escape
           which characters.  See perlsec for a clean and safe example of a
           manual fork() and exec() to emulate backticks safely.
           On some platforms (notably DOS-like ones), the shell may not be
           capable of dealing with multiline commands, so putting newlines in
           the string may not get you what you want.  You may be able to
           evaluate multiple commands in a single line by separating them with
           the command separator character, if your shell supports that (for
           example, ";" on many Unix shells and "&" on the Windows NT "cmd"
           shell).
           Beginning with v5.6.0, Perl will attempt to flush all files opened
           for output before starting the child process, but this may not be
           supported on some platforms (see perlport).  To be safe, you may
           need to set $| ($AUTOFLUSH in English) or call the "autoflush()"
           method of "IO::Handle" on any open handles.
           Beware that some command shells may place restrictions on the
           length of the command line.  You must ensure your strings don't
           exceed this limit after any necessary interpolations.  See the
           platform-specific release notes for more details about your
           particular environment.
           Using this operator can lead to programs that are difficult to
           port, because the shell commands called vary between systems, and
           may in fact not be present at all.  As one example, the "type"
           command under the POSIX shell is very different from the "type"
           command under DOS.  That doesn't mean you should go out of your way
           to avoid backticks when they're the right way to get something
           done.  Perl was made to be a glue language, and one of the things
           it glues together is commands.  Just understand what you're getting
           yourself into.
           See "I/O Operators" for more discussion.
       qw/STRING/
           Evaluates to a list of the words extracted out of STRING, using
           embedded whitespace as the word delimiters.  It can be understood
           as being roughly equivalent to:
               split(" ", q/STRING/);
           the differences being that it generates a real list at compile
           time, and in scalar context it returns the last element in the
           list.  So this expression:
               qw(foo bar baz)
           is semantically equivalent to the list:
               "foo", "bar", "baz"
           Some frequently seen examples:
               use POSIX qw( setlocale localeconv )
               @EXPORT = qw( foo bar baz );
           A common mistake is to try to separate the words with comma or to
           put comments into a multi-line "qw"-string.  For this reason, the
           "use warnings" pragma and the -w switch (that is, the $^W variable)
           produces warnings if the STRING contains the "," or the "#"
           character.
       tr/SEARCHLIST/REPLACEMENTLIST/cdsr
       y/SEARCHLIST/REPLACEMENTLIST/cdsr
           Transliterates all occurrences of the characters found in the
           search list with the corresponding character in the replacement
           list.  It returns the number of characters replaced or deleted.  If
           no string is specified via the "=~" or "!~" operator, the $_ string
           is transliterated.
           If the "/r" (non-destructive) option is present, a new copy of the
           string is made and its characters transliterated, and this copy is
           returned no matter whether it was modified or not: the original
           string is always left unchanged.  The new copy is always a plain
           string, even if the input string is an object or a tied variable.
           Unless the "/r" option is used, the string specified with "=~" must
           be a scalar variable, an array element, a hash element, or an
           assignment to one of those; in other words, an lvalue.
           A character range may be specified with a hyphen, so "tr/A-J/0-9/"
           does the same replacement as "tr/ACEGIBDFHJ/0246813579/".  For sed
           devotees, "y" is provided as a synonym for "tr".  If the SEARCHLIST
           is delimited by bracketing quotes, the REPLACEMENTLIST has its own
           pair of quotes, which may or may not be bracketing quotes; for
           example, "tr[aeiouy][yuoiea]" or "tr(+\-*/)/ABCD/".
           Note that "tr" does not do regular expression character classes
           such as "\d" or "\pL".  The "tr" operator is not equivalent to the
           tr(1) utility.  If you want to map strings between lower/upper
           cases, see "lc" in perlfunc and "uc" in perlfunc, and in general
           consider using the "s" operator if you need regular expressions.
           The "\U", "\u", "\L", and "\l" string-interpolation escapes on the
           right side of a substitution operator will perform correct case-
           mappings, but "tr[a-z][A-Z]" will not (except sometimes on legacy
           7-bit data).
           Note also that the whole range idea is rather unportable between
           character sets--and even within character sets they may cause
           results you probably didn't expect.  A sound principle is to use
           only ranges that begin from and end at either alphabets of equal
           case (a-e, A-E), or digits (0-4).  Anything else is unsafe.  If in
           doubt, spell out the character sets in full.
           Options:
               c   Complement the SEARCHLIST.
               d   Delete found but unreplaced characters.
               s   Squash duplicate replaced characters.
               r   Return the modified string and leave the original string
                   untouched.
           If the "/c" modifier is specified, the SEARCHLIST character set is
           complemented.  If the "/d" modifier is specified, any characters
           specified by SEARCHLIST not found in REPLACEMENTLIST are deleted.
           (Note that this is slightly more flexible than the behavior of some
           tr programs, which delete anything they find in the SEARCHLIST,
           period.) If the "/s" modifier is specified, sequences of characters
           that were transliterated to the same character are squashed down to
           a single instance of the character.
           If the "/d" modifier is used, the REPLACEMENTLIST is always
           interpreted exactly as specified.  Otherwise, if the
           REPLACEMENTLIST is shorter than the SEARCHLIST, the final character
           is replicated till it is long enough.  If the REPLACEMENTLIST is
           empty, the SEARCHLIST is replicated.  This latter is useful for
           counting characters in a class or for squashing character sequences
           in a class.
           Examples:
               $ARGV[1] =~ tr/A-Z/a-z/;    # canonicalize to lower case ASCII
               $cnt = tr/*/*/;             # count the stars in $_
               $cnt = $sky =~ tr/*/*/;     # count the stars in $sky
               $cnt = tr/0-9//;            # count the digits in $_
               tr/a-zA-Z//s;               # bookkeeper -> bokeper
               ($HOST = $host) =~ tr/a-z/A-Z/;
                $HOST = $host  =~ tr/a-z/A-Z/r;   # same thing
               $HOST = $host =~ tr/a-z/A-Z/r    # chained with s///r
                             =~ s/:/ -p/r;
               tr/a-zA-Z/ /cs;             # change non-alphas to single space
               @stripped = map tr/a-zA-Z/ /csr, @original;
                                           # /r with map
               tr [\200-\377]
                  [\000-\177];             # wickedly delete 8th bit
           If multiple transliterations are given for a character, only the
           first one is used:
               tr/AAA/XYZ/
           will transliterate any A to X.
           Because the transliteration table is built at compile time, neither
           the SEARCHLIST nor the REPLACEMENTLIST are subjected to double
           quote interpolation.  That means that if you want to use variables,
           you must use an eval():
               eval "tr/$oldlist/$newlist/";
               die $@ if $@;
               eval "tr/$oldlist/$newlist/, 1" or die $@;
       <<EOF
           A line-oriented form of quoting is based on the shell "here-
           document" syntax.  Following a "<<" you specify a string to
           terminate the quoted material, and all lines following the current
           line down to the terminating string are the value of the item.
           The terminating string may be either an identifier (a word), or
           some quoted text.  An unquoted identifier works like double quotes.
           There may not be a space between the "<<" and the identifier,
           unless the identifier is explicitly quoted.  (If you put a space it
           will be treated as a null identifier, which is valid, and matches
           the first empty line.)  The terminating string must appear by
           itself (unquoted and with no surrounding whitespace) on the
           terminating line.
           If the terminating string is quoted, the type of quotes used
           determine the treatment of the text.
           Double Quotes
               Double quotes indicate that the text will be interpolated using
               exactly the same rules as normal double quoted strings.
                      print <<EOF;
                   The price is $Price.
                   EOF
                      print << "EOF"; # same as above
                   The price is $Price.
                   EOF
           Single Quotes
               Single quotes indicate the text is to be treated literally with
               no interpolation of its content. This is similar to single
               quoted strings except that backslashes have no special meaning,
               with "\\" being treated as two backslashes and not one as they
               would in every other quoting construct.
               Just as in the shell, a backslashed bareword following the "<<"
               means the same thing as a single-quoted string does:
                       $cost = <<'VISTA';  # hasta la ...
                   That'll be $10 please, ma'am.
                   VISTA
                       $cost = <<\VISTA;   # Same thing!
                   That'll be $10 please, ma'am.
                   VISTA
               This is the only form of quoting in perl where there is no need
               to worry about escaping content, something that code generators
               can and do make good use of.
           Backticks
               The content of the here doc is treated just as it would be if
               the string were embedded in backticks. Thus the content is
               interpolated as though it were double quoted and then executed
               via the shell, with the results of the execution returned.
                      print << `EOC`; # execute command and get results
                   echo hi there
                   EOC
           It is possible to stack multiple here-docs in a row:
                  print <<"foo", <<"bar"; # you can stack them
               I said foo.
               foo
               I said bar.
               bar
                  myfunc(<< "THIS", 23, <<'THAT');
               Here's a line
               or two.
               THIS
               and here's another.
               THAT
           Just don't forget that you have to put a semicolon on the end to
           finish the statement, as Perl doesn't know you're not going to try
           to do this:
                  print <<ABC
               179231
               ABC
                  + 20;
           If you want to remove the line terminator from your here-docs, use
           "chomp()".
               chomp($string = <<'END');
               This is a string.
               END
           If you want your here-docs to be indented with the rest of the
           code, you'll need to remove leading whitespace from each line
           manually:
               ($quote = <<'FINIS') =~ s/^\s+//gm;
                  The Road goes ever on and on,
                  down from the door where it began.
               FINIS
           If you use a here-doc within a delimited construct, such as in
           "s///eg", the quoted material must come on the lines following the
           final delimiter.  So instead of
               s/this/<<E . 'that'
               the other
               E
                . 'more '/eg;
           you have to write
               s/this/<<E . 'that'
                . 'more '/eg;
               the other
               E
           If the terminating identifier is on the last line of the program,
           you must be sure there is a newline after it; otherwise, Perl will
           give the warning Can't find string terminator "END" anywhere before
           EOF....
           Additionally, quoting rules for the end-of-string identifier are
           unrelated to Perl's quoting rules. "q()", "qq()", and the like are
           not supported in place of '' and "", and the only interpolation is
           for backslashing the quoting character:
               print << "abc\"def";
               testing...
               abc"def
           Finally, quoted strings cannot span multiple lines.  The general
           rule is that the identifier must be a string literal.  Stick with
           that, and you should be safe.
   Gory details of parsing quoted constructs
       When presented with something that might have several different
       interpretations, Perl uses the DWIM (that's "Do What I Mean") principle
       to pick the most probable interpretation.  This strategy is so
       successful that Perl programmers often do not suspect the ambivalence
       of what they write.  But from time to time, Perl's notions differ
       substantially from what the author honestly meant.
       This section hopes to clarify how Perl handles quoted constructs.
       Although the most common reason to learn this is to unravel
       labyrinthine regular expressions, because the initial steps of parsing
       are the same for all quoting operators, they are all discussed
       together.
       The most important Perl parsing rule is the first one discussed below:
       when processing a quoted construct, Perl first finds the end of that
       construct, then interprets its contents.  If you understand this rule,
       you may skip the rest of this section on the first reading.  The other
       rules are likely to contradict the user's expectations much less
       frequently than this first one.
       Some passes discussed below are performed concurrently, but because
       their results are the same, we consider them individually.  For
       different quoting constructs, Perl performs different numbers of
       passes, from one to four, but these passes are always performed in the
       same order.
       Finding the end
           The first pass is finding the end of the quoted construct, where
           the information about the delimiters is used in parsing.  During
           this search, text between the starting and ending delimiters is
           copied to a safe location. The text copied gets delimiter-
           independent.
           If the construct is a here-doc, the ending delimiter is a line that
           has a terminating string as the content. Therefore "<<EOF" is
           terminated by "EOF" immediately followed by "\n" and starting from
           the first column of the terminating line.  When searching for the
           terminating line of a here-doc, nothing is skipped. In other words,
           lines after the here-doc syntax are compared with the terminating
           string line by line.
           For the constructs except here-docs, single characters are used as
           starting and ending delimiters. If the starting delimiter is an
           opening punctuation (that is "(", "[", "{", or "<"), the ending
           delimiter is the corresponding closing punctuation (that is ")",
           "]", "}", or ">").  If the starting delimiter is an unpaired
           character like "/" or a closing punctuation, the ending delimiter
           is same as the starting delimiter.  Therefore a "/" terminates a
           "qq//" construct, while a "]" terminates "qq[]" and "qq]]"
           constructs.
           When searching for single-character delimiters, escaped delimiters
           and "\\" are skipped.  For example, while searching for terminating
           "/", combinations of "\\" and "\/" are skipped.  If the delimiters
           are bracketing, nested pairs are also skipped.  For example, while
           searching for closing "]" paired with the opening "[", combinations
           of "\\", "\]", and "\[" are all skipped, and nested "[" and "]" are
           skipped as well.  However, when backslashes are used as the
           delimiters (like "qq\\" and "tr\\\"), nothing is skipped.  During
           the search for the end, backslashes that escape delimiters or
           backslashes are removed (exactly speaking, they are not copied to
           the safe location).
           For constructs with three-part delimiters ("s///", "y///", and
           "tr///"), the search is repeated once more.  If the first delimiter
           is not an opening punctuation, three delimiters must be same such
           as "s!!!" and "tr)))", in which case the second delimiter
           terminates the left part and starts the right part at once.  If the
           left part is delimited by bracketing punctuation (that is "()",
           "[]", "{}", or "<>"), the right part needs another pair of
           delimiters such as "s(){}" and "tr[]//".  In these cases,
           whitespace and comments are allowed between both parts, though the
           comment must follow at least one whitespace character; otherwise a
           character expected as the start of the comment may be regarded as
           the starting delimiter of the right part.
           During this search no attention is paid to the semantics of the
           construct.  Thus:
               "$hash{"$foo/$bar"}"
           or:
               m/
                 bar       # NOT a comment, this slash / terminated m//!
                /x
           do not form legal quoted expressions.   The quoted part ends on the
           first """ and "/", and the rest happens to be a syntax error.
           Because the slash that terminated "m//" was followed by a "SPACE",
           the example above is not "m//x", but rather "m//" with no "/x"
           modifier.  So the embedded "#" is interpreted as a literal "#".
           Also no attention is paid to "\c\" (multichar control char syntax)
           during this search. Thus the second "\" in "qq/\c\/" is interpreted
           as a part of "\/", and the following "/" is not recognized as a
           delimiter.  Instead, use "\034" or "\x1c" at the end of quoted
           constructs.
       Interpolation
           The next step is interpolation in the text obtained, which is now
           delimiter-independent.  There are multiple cases.
           "<<'EOF'"
               No interpolation is performed.  Note that the combination "\\"
               is left intact, since escaped delimiters are not available for
               here-docs.
           "m''", the pattern of "s'''"
               No interpolation is performed at this stage.  Any backslashed
               sequences including "\\" are treated at the stage to "parsing
               regular expressions".
           '', "q//", "tr'''", "y'''", the replacement of "s'''"
               The only interpolation is removal of "\" from pairs of "\\".
               Therefore "-" in "tr'''" and "y'''" is treated literally as a
               hyphen and no character range is available.  "\1" in the
               replacement of "s'''" does not work as $1.
           "tr///", "y///"
               No variable interpolation occurs.  String modifying
               combinations for case and quoting such as "\Q", "\U", and "\E"
               are not recognized.  The other escape sequences such as "\200"
               and "\t" and backslashed characters such as "\\" and "\-" are
               converted to appropriate literals.  The character "-" is
               treated specially and therefore "\-" is treated as a literal
               "-".
           "", "``", "qq//", "qx//", "<file*glob>", "<<"EOF""
               "\Q", "\U", "\u", "\L", "\l", "\F" (possibly paired with "\E")
               are converted to corresponding Perl constructs.  Thus,
               "$foo\Qbaz$bar" is converted to "$foo . (quotemeta("baz" .
               $bar))" internally.  The other escape sequences such as "\200"
               and "\t" and backslashed characters such as "\\" and "\-" are
               replaced with appropriate expansions.
               Let it be stressed that whatever falls between "\Q" and "\E" is
               interpolated in the usual way.  Something like "\Q\\E" has no
               "\E" inside.  instead, it has "\Q", "\\", and "E", so the
               result is the same as for "\\\\E".  As a general rule,
               backslashes between "\Q" and "\E" may lead to counterintuitive
               results.  So, "\Q\t\E" is converted to "quotemeta("\t")", which
               is the same as "\\\t" (since TAB is not alphanumeric).  Note
               also that:
                 $str = '\t';
                 return "\Q$str";
               may be closer to the conjectural intention of the writer of
               "\Q\t\E".
               Interpolated scalars and arrays are converted internally to the
               "join" and "." catenation operations.  Thus, "$foo XXX '@arr'"
               becomes:
                 $foo . " XXX '" . (join $", @arr) . "'";
               All operations above are performed simultaneously, left to
               right.
               Because the result of "\Q STRING \E" has all metacharacters
               quoted, there is no way to insert a literal "$" or "@" inside a
               "\Q\E" pair.  If protected by "\", "$" will be quoted to became
               "\\\$"; if not, it is interpreted as the start of an
               interpolated scalar.
               Note also that the interpolation code needs to make a decision
               on where the interpolated scalar ends.  For instance, whether
               "a $b -> {c}" really means:
                 "a " . $b . " -> {c}";
               or:
                 "a " . $b -> {c};
               Most of the time, the longest possible text that does not
               include spaces between components and which contains matching
               braces or brackets.  because the outcome may be determined by
               voting based on heuristic estimators, the result is not
               strictly predictable.  Fortunately, it's usually correct for
               ambiguous cases.
           the replacement of "s///"
               Processing of "\Q", "\U", "\u", "\L", "\l", "\F" and
               interpolation happens as with "qq//" constructs.
               It is at this step that "\1" is begrudgingly converted to $1 in
               the replacement text of "s///", in order to correct the
               incorrigible sed hackers who haven't picked up the saner idiom
               yet.  A warning is emitted if the "use warnings" pragma or the
               -w command-line flag (that is, the $^W variable) was set.
           "RE" in "?RE?", "/RE/", "m/RE/", "s/RE/foo/",
               Processing of "\Q", "\U", "\u", "\L", "\l", "\F", "\E", and
               interpolation happens (almost) as with "qq//" constructs.
               Processing of "\N{...}" is also done here, and compiled into an
               intermediate form for the regex compiler.  (This is because, as
               mentioned below, the regex compilation may be done at execution
               time, and "\N{...}" is a compile-time construct.)
               However any other combinations of "\" followed by a character
               are not substituted but only skipped, in order to parse them as
               regular expressions at the following step.  As "\c" is skipped
               at this step, "@" of "\c@" in RE is possibly treated as an
               array symbol (for example @foo), even though the same text in
               "qq//" gives interpolation of "\c@".
               Moreover, inside "(?{BLOCK})", "(?# comment )", and a
               "#"-comment in a "//x"-regular expression, no processing is
               performed whatsoever.  This is the first step at which the
               presence of the "//x" modifier is relevant.
               Interpolation in patterns has several quirks: $|, $(, $), "@+"
               and "@-" are not interpolated, and constructs $var[SOMETHING]
               are voted (by several different estimators) to be either an
               array element or $var followed by an RE alternative.  This is
               where the notation "${arr[$bar]}" comes handy: "/${arr[0-9]}/"
               is interpreted as array element "-9", not as a regular
               expression from the variable $arr followed by a digit, which
               would be the interpretation of "/$arr[0-9]/".  Since voting
               among different estimators may occur, the result is not
               predictable.
               The lack of processing of "\\" creates specific restrictions on
               the post-processed text.  If the delimiter is "/", one cannot
               get the combination "\/" into the result of this step.  "/"
               will finish the regular expression, "\/" will be stripped to
               "/" on the previous step, and "\\/" will be left as is.
               Because "/" is equivalent to "\/" inside a regular expression,
               this does not matter unless the delimiter happens to be
               character special to the RE engine, such as in "s*foo*bar*",
               "m[foo]", or "?foo?"; or an alphanumeric char, as in:
                 m m ^ a \s* b mmx;
               In the RE above, which is intentionally obfuscated for
               illustration, the delimiter is "m", the modifier is "mx", and
               after delimiter-removal the RE is the same as for "m/ ^ a \s* b
               /mx".  There's more than one reason you're encouraged to
               restrict your delimiters to non-alphanumeric, non-whitespace
               choices.
           This step is the last one for all constructs except regular
           expressions, which are processed further.
       parsing regular expressions
           Previous steps were performed during the compilation of Perl code,
           but this one happens at run time, although it may be optimized to
           be calculated at compile time if appropriate.  After preprocessing
           described above, and possibly after evaluation if concatenation,
           joining, casing translation, or metaquoting are involved, the
           resulting string is passed to the RE engine for compilation.
           Whatever happens in the RE engine might be better discussed in
           perlre, but for the sake of continuity, we shall do so here.
           This is another step where the presence of the "//x" modifier is
           relevant.  The RE engine scans the string from left to right and
           converts it to a finite automaton.
           Backslashed characters are either replaced with corresponding
           literal strings (as with "\{"), or else they generate special nodes
           in the finite automaton (as with "\b").  Characters special to the
           RE engine (such as "|") generate corresponding nodes or groups of
           nodes.  "(?#...)" comments are ignored.  All the rest is either
           converted to literal strings to match, or else is ignored (as is
           whitespace and "#"-style comments if "//x" is present).
           Parsing of the bracketed character class construct, "[...]", is
           rather different than the rule used for the rest of the pattern.
           The terminator of this construct is found using the same rules as
           for finding the terminator of a "{}"-delimited construct, the only
           exception being that "]" immediately following "[" is treated as
           though preceded by a backslash.  Similarly, the terminator of
           "(?{...})" is found using the same rules as for finding the
           terminator of a "{}"-delimited construct.
           It is possible to inspect both the string given to RE engine and
           the resulting finite automaton.  See the arguments
           "debug"/"debugcolor" in the "use re" pragma, as well as Perl's -Dr
           command-line switch documented in "Command Switches" in perlrun.
       Optimization of regular expressions
           This step is listed for completeness only.  Since it does not
           change semantics, details of this step are not documented and are
           subject to change without notice.  This step is performed over the
           finite automaton that was generated during the previous pass.
           It is at this stage that "split()" silently optimizes "/^/" to mean
           "/^/m".
   I/O Operators
       There are several I/O operators you should know about.
       A string enclosed by backticks (grave accents) first undergoes double-
       quote interpolation.  It is then interpreted as an external command,
       and the output of that command is the value of the backtick string,
       like in a shell.  In scalar context, a single string consisting of all
       output is returned.  In list context, a list of values is returned, one
       per line of output.  (You can set $/ to use a different line
       terminator.)  The command is executed each time the pseudo-literal is
       evaluated.  The status value of the command is returned in $? (see
       perlvar for the interpretation of $?).  Unlike in csh, no translation
       is done on the return data--newlines remain newlines.  Unlike in any of
       the shells, single quotes do not hide variable names in the command
       from interpretation.  To pass a literal dollar-sign through to the
       shell you need to hide it with a backslash.  The generalized form of
       backticks is "qx//".  (Because backticks always undergo shell expansion
       as well, see perlsec for security concerns.)
       In scalar context, evaluating a filehandle in angle brackets yields the
       next line from that file (the newline, if any, included), or "undef" at
       end-of-file or on error.  When $/ is set to "undef" (sometimes known as
       file-slurp mode) and the file is empty, it returns '' the first time,
       followed by "undef" subsequently.
       Ordinarily you must assign the returned value to a variable, but there
       is one situation where an automatic assignment happens.  If and only if
       the input symbol is the only thing inside the conditional of a "while"
       statement (even if disguised as a "for(;;)" loop), the value is
       automatically assigned to the global variable $_, destroying whatever
       was there previously.  (This may seem like an odd thing to you, but
       you'll use the construct in almost every Perl script you write.)  The
       $_ variable is not implicitly localized.  You'll have to put a "local
       $_;" before the loop if you want that to happen.
       The following lines are equivalent:
           while (defined($_ = <STDIN>)) { print; }
           while ($_ = <STDIN>) { print; }
           while (<STDIN>) { print; }
           for (;<STDIN>;) { print; }
           print while defined($_ = <STDIN>);
           print while ($_ = <STDIN>);
           print while <STDIN>;
       This also behaves similarly, but assigns to a lexical variable instead
       of to $_:
           while (my $line = <STDIN>) { print $line }
       In these loop constructs, the assigned value (whether assignment is
       automatic or explicit) is then tested to see whether it is defined.
       The defined test avoids problems where the line has a string value that
       would be treated as false by Perl; for example a "" or a "0" with no
       trailing newline.  If you really mean for such values to terminate the
       loop, they should be tested for explicitly:
           while (($_ = <STDIN>) ne '0') { ... }
           while (<STDIN>) { last unless $_; ... }
       In other boolean contexts, "<FILEHANDLE>" without an explicit "defined"
       test or comparison elicits a warning if the "use warnings" pragma or
       the -w command-line switch (the $^W variable) is in effect.
       The filehandles STDIN, STDOUT, and STDERR are predefined.  (The
       filehandles "stdin", "stdout", and "stderr" will also work except in
       packages, where they would be interpreted as local identifiers rather
       than global.)  Additional filehandles may be created with the open()
       function, amongst others.  See perlopentut and "open" in perlfunc for
       details on this.
       If a <FILEHANDLE> is used in a context that is looking for a list, a
       list comprising all input lines is returned, one line per list element.
       It's easy to grow to a rather large data space this way, so use with
       care.
       <FILEHANDLE> may also be spelled "readline(*FILEHANDLE)".  See
       "readline" in perlfunc.
       The null filehandle <> is special: it can be used to emulate the
       behavior of sed and awk, and any other Unix filter program that takes a
       list of filenames, doing the same to each line of input from all of
       them.  Input from <> comes either from standard input, or from each
       file listed on the command line.  Here's how it works: the first time
       <> is evaluated, the @ARGV array is checked, and if it is empty,
       $ARGV[0] is set to "-", which when opened gives you standard input.
       The @ARGV array is then processed as a list of filenames.  The loop
           while (<>) {
               ...                     # code for each line
           }
       is equivalent to the following Perl-like pseudo code:
           unshift(@ARGV, '-') unless @ARGV;
           while ($ARGV = shift) {
               open(ARGV, $ARGV);
               while (<ARGV>) {
                   ...         # code for each line
               }
           }
       except that it isn't so cumbersome to say, and will actually work.  It
       really does shift the @ARGV array and put the current filename into the
       $ARGV variable.  It also uses filehandle ARGV internally. <> is just a
       synonym for <ARGV>, which is magical.  (The pseudo code above doesn't
       work because it treats <ARGV> as non-magical.)
       Since the null filehandle uses the two argument form of "open" in
       perlfunc it interprets special characters, so if you have a script like
       this:
           while (<>) {
               print;
           }
       and call it with "perl dangerous.pl 'rm -rfv *|'", it actually opens a
       pipe, executes the "rm" command and reads "rm"'s output from that pipe.
       If you want all items in @ARGV to be interpreted as file names, you can
       use the module "ARGV::readonly" from CPAN.
       You can modify @ARGV before the first <> as long as the array ends up
       containing the list of filenames you really want.  Line numbers ($.)
       continue as though the input were one big happy file.  See the example
       in "eof" in perlfunc for how to reset line numbers on each file.
       If you want to set @ARGV to your own list of files, go right ahead.
       This sets @ARGV to all plain text files if no @ARGV was given:
           @ARGV = grep { -f && -T } glob('*') unless @ARGV;
       You can even set them to pipe commands.  For example, this
       automatically filters compressed arguments through gzip:
           @ARGV = map { /\.(gz|Z)$/ ? "gzip -dc < $_ |" : $_ } @ARGV;
       If you want to pass switches into your script, you can use one of the
       Getopts modules or put a loop on the front like this:
           while ($_ = $ARGV[0], /^-/) {
               shift;
               last if /^--$/;
               if (/^-D(.*)/) { $debug = $1 }
               if (/^-v/)     { $verbose++  }
               # ...           # other switches
           }
           while (<>) {
               # ...           # code for each line
           }
       The <> symbol will return "undef" for end-of-file only once.  If you
       call it again after this, it will assume you are processing another
       @ARGV list, and if you haven't set @ARGV, will read input from STDIN.
       If what the angle brackets contain is a simple scalar variable (for
       example, <$foo>), then that variable contains the name of the
       filehandle to input from, or its typeglob, or a reference to the same.
       For example:
           $fh = \*STDIN;
           $line = <$fh>;
       If what's within the angle brackets is neither a filehandle nor a
       simple scalar variable containing a filehandle name, typeglob, or
       typeglob reference, it is interpreted as a filename pattern to be
       globbed, and either a list of filenames or the next filename in the
       list is returned, depending on context.  This distinction is determined
       on syntactic grounds alone.  That means "<$x>" is always a readline()
       from an indirect handle, but "<$hash{key}>" is always a glob().  That's
       because $x is a simple scalar variable, but $hash{key} is not--it's a
       hash element.  Even "<$x >" (note the extra space) is treated as
       "glob("$x ")", not "readline($x)".
       One level of double-quote interpretation is done first, but you can't
       say "<$foo>" because that's an indirect filehandle as explained in the
       previous paragraph.  (In older versions of Perl, programmers would
       insert curly brackets to force interpretation as a filename glob:
       "<${foo}>".  These days, it's considered cleaner to call the internal
       function directly as "glob($foo)", which is probably the right way to
       have done it in the first place.)  For example:
           while (<*.c>) {
               chmod 0644, $_;
           }
       is roughly equivalent to:
           open(FOO, "echo *.c | tr -s ' \t\r\f' '\\012\\012\\012\\012'|");
           while (<FOO>) {
               chomp;
               chmod 0644, $_;
           }
       except that the globbing is actually done internally using the standard
       "File::Glob" extension.  Of course, the shortest way to do the above
       is:
           chmod 0644, <*.c>;
       A (file)glob evaluates its (embedded) argument only when it is starting
       a new list.  All values must be read before it will start over.  In
       list context, this isn't important because you automatically get them
       all anyway.  However, in scalar context the operator returns the next
       value each time it's called, or "undef" when the list has run out.  As
       with filehandle reads, an automatic "defined" is generated when the
       glob occurs in the test part of a "while", because legal glob returns
       (for example, a file called 0) would otherwise terminate the loop.
       Again, "undef" is returned only once.  So if you're expecting a single
       value from a glob, it is much better to say
           ($file) = <blurch*>;
       than
           $file = <blurch*>;
       because the latter will alternate between returning a filename and
       returning false.
       If you're trying to do variable interpolation, it's definitely better
       to use the glob() function, because the older notation can cause people
       to become confused with the indirect filehandle notation.
           @files = glob("$dir/*.[ch]");
           @files = glob($files[$i]);
   Constant Folding
       Like C, Perl does a certain amount of expression evaluation at compile
       time whenever it determines that all arguments to an operator are
       static and have no side effects.  In particular, string concatenation
       happens at compile time between literals that don't do variable
       substitution.  Backslash interpolation also happens at compile time.
       You can say
             'Now is the time for all'
           . "\n"
           .  'good men to come to.'
       and this all reduces to one string internally.  Likewise, if you say
           foreach $file (@filenames) {
               if (-s $file > 5 + 100 * 2**16) {  }
           }
       the compiler precomputes the number which that expression represents so
       that the interpreter won't have to.
   No-ops
       Perl doesn't officially have a no-op operator, but the bare constants 0
       and 1 are special-cased not to produce a warning in void context, so
       you can for example safely do
           1 while foo();
   Bitwise String Operators
       Bitstrings of any size may be manipulated by the bitwise operators ("~
       | & ^").
       If the operands to a binary bitwise op are strings of different sizes,
       | and ^ ops act as though the shorter operand had additional zero bits
       on the right, while the & op acts as though the longer operand were
       truncated to the length of the shorter.  The granularity for such
       extension or truncation is one or more bytes.
           # ASCII-based examples
           print "j p \n" ^ " a h";            # prints "JAPH\n"
           print "JA" | "  ph\n";              # prints "japh\n"
           print "japh\nJunk" & '_____';       # prints "JAPH\n";
           print 'p N$' ^ " E<H\n";            # prints "Perl\n";
       If you are intending to manipulate bitstrings, be certain that you're
       supplying bitstrings: If an operand is a number, that will imply a
       numeric bitwise operation.  You may explicitly show which type of
       operation you intend by using "" or "0+", as in the examples below.
           $foo =  150  |  105;        # yields 255  (0x96 | 0x69 is 0xFF)
           $foo = '150' |  105;        # yields 255
           $foo =  150  | '105';       # yields 255
           $foo = '150' | '105';       # yields string '155' (under ASCII)
           $baz = 0+$foo & 0+$bar;     # both ops explicitly numeric
           $biz = "$foo" ^ "$bar";     # both ops explicitly stringy
       See "vec" in perlfunc for information on how to manipulate individual
       bits in a bit vector.
   Integer Arithmetic
       By default, Perl assumes that it must do most of its arithmetic in
       floating point.  But by saying
           use integer;
       you may tell the compiler to use integer operations (see integer for a
       detailed explanation) from here to the end of the enclosing BLOCK.  An
       inner BLOCK may countermand this by saying
           no integer;
       which lasts until the end of that BLOCK.  Note that this doesn't mean
       everything is an integer, merely that Perl will use integer operations
       for arithmetic, comparison, and bitwise operators.  For example, even
       under "use integer", if you take the sqrt(2), you'll still get
       1.4142135623731 or so.
       Used on numbers, the bitwise operators ("&", "|", "^", "~", "<<", and
       ">>") always produce integral results.  (But see also "Bitwise String
       Operators".)  However, "use integer" still has meaning for them.  By
       default, their results are interpreted as unsigned integers, but if
       "use integer" is in effect, their results are interpreted as signed
       integers.  For example, "~0" usually evaluates to a large integral
       value.  However, "use integer; ~0" is "-1" on two's-complement
       machines.
   Floating-point Arithmetic
       While "use integer" provides integer-only arithmetic, there is no
       analogous mechanism to provide automatic rounding or truncation to a
       certain number of decimal places.  For rounding to a certain number of
       digits, sprintf() or printf() is usually the easiest route.  See
       perlfaq4.
       Floating-point numbers are only approximations to what a mathematician
       would call real numbers.  There are infinitely more reals than floats,
       so some corners must be cut.  For example:
           printf "%.20g\n", 123456789123456789;
           #        produces 123456789123456784
       Testing for exact floating-point equality or inequality is not a good
       idea.  Here's a (relatively expensive) work-around to compare whether
       two floating-point numbers are equal to a particular number of decimal
       places.  See Knuth, volume II, for a more robust treatment of this
       topic.
           sub fp_equal {
               my ($X, $Y, $POINTS) = @_;
               my ($tX, $tY);
               $tX = sprintf("%.${POINTS}g", $X);
               $tY = sprintf("%.${POINTS}g", $Y);
               return $tX eq $tY;
           }
       The POSIX module (part of the standard perl distribution) implements
       ceil(), floor(), and other mathematical and trigonometric functions.
       The Math::Complex module (part of the standard perl distribution)
       defines mathematical functions that work on both the reals and the
       imaginary numbers.  Math::Complex not as efficient as POSIX, but POSIX
       can't work with complex numbers.
       Rounding in financial applications can have serious implications, and
       the rounding method used should be specified precisely.  In these
       cases, it probably pays not to trust whichever system rounding is being
       used by Perl, but to instead implement the rounding function you need
       yourself.
   Bigger Numbers
       The standard "Math::BigInt", "Math::BigRat", and "Math::BigFloat"
       modules, along with the "bigint", "bigrat", and "bitfloat" pragmas,
       provide variable-precision arithmetic and overloaded operators,
       although they're currently pretty slow. At the cost of some space and
       considerable speed, they avoid the normal pitfalls associated with
       limited-precision representations.
               use 5.010;
               use bigint;  # easy interface to Math::BigInt
               $x = 123456789123456789;
               say $x * $x;
           +15241578780673678515622620750190521
       Or with rationals:
               use 5.010;
               use bigrat;
               $a = 3/22;
               $b = 4/6;
               say "a/b is ", $a/$b;
               say "a*b is ", $a*$b;
           a/b is 9/44
           a*b is 1/11
       Several modules let you calculate with (bound only by memory and CPU
       time) unlimited or fixed precision. There are also some non-standard
       modules that provide faster implementations via external C libraries.
       Here is a short, but incomplete summary:
         Math::Fraction         big, unlimited fractions like 9973 / 12967
         Math::String           treat string sequences like numbers
         Math::FixedPrecision   calculate with a fixed precision
         Math::Currency         for currency calculations
         Bit::Vector            manipulate bit vectors fast (uses C)
         Math::BigIntFast       Bit::Vector wrapper for big numbers
         Math::Pari             provides access to the Pari C library
         Math::BigInteger       uses an external C library
         Math::Cephes           uses external Cephes C library (no big numbers)
         Math::Cephes::Fraction fractions via the Cephes library
         Math::GMP              another one using an external C library
       Choose wisely.

perl v5.16.3                      2013-03-04                         PERLOP(1)