STAT(2) Linux Programmer's Manual STAT(2)
NAME
stat, fstat, lstat - get file status
SYNOPSIS
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
int stat(const char *path, struct stat *buf);
int fstat(int fd, struct stat *buf);
int lstat(const char *path, struct stat *buf);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
lstat():
_BSD_SOURCE || _XOPEN_SOURCE >= 500 ||
_XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED
|| /* Since glibc 2.10: */ _POSIX_C_SOURCE >= 200112L
DESCRIPTION
These functions return information about a file. No permissions are
required on the file itself, but--in the case of stat() and lstat() --
execute (search) permission is required on all of the directories in
path that lead to the file.
stat() stats the file pointed to by path and fills in buf.
lstat() is identical to stat(), except that if path is a symbolic link,
then the link itself is stat-ed, not the file that it refers to.
fstat() is identical to stat(), except that the file to be stat-ed is
specified by the file descriptor fd.
All of these system calls return a stat structure, which contains the
following fields:
struct stat {
dev_t st_dev; /* ID of device containing file */
ino_t st_ino; /* inode number */
mode_t st_mode; /* protection */
nlink_t st_nlink; /* number of hard links */
uid_t st_uid; /* user ID of owner */
gid_t st_gid; /* group ID of owner */
dev_t st_rdev; /* device ID (if special file) */
off_t st_size; /* total size, in bytes */
blksize_t st_blksize; /* blocksize for file system I/O */
blkcnt_t st_blocks; /* number of 512B blocks allocated */
time_t st_atime; /* time of last access */
time_t st_mtime; /* time of last modification */
time_t st_ctime; /* time of last status change */
};
The st_dev field describes the device on which this file resides. (The
major(3) and minor(3) macros may be useful to decompose the device ID
in this field.)
The st_rdev field describes the device that this file (inode) repre-
sents.
The st_size field gives the size of the file (if it is a regular file
or a symbolic link) in bytes. The size of a symbolic link is the
length of the pathname it contains, without a terminating null byte.
The st_blocks field indicates the number of blocks allocated to the
file, 512-byte units. (This may be smaller than st_size/512 when the
file has holes.)
The st_blksize field gives the "preferred" blocksize for efficient file
system I/O. (Writing to a file in smaller chunks may cause an ineffi-
cient read-modify-rewrite.)
Not all of the Linux file systems implement all of the time fields.
Some file system types allow mounting in such a way that file and/or
directory accesses do not cause an update of the st_atime field. (See
noatime, nodiratime, and relatime in mount(8), and related information
in mount(2).) In addition, st_atime is not updated if a file is opened
with the O_NOATIME; see open(2).
The field st_atime is changed by file accesses, for example, by
execve(2), mknod(2), pipe(2), utime(2) and read(2) (of more than zero
bytes). Other routines, like mmap(2), may or may not update st_atime.
The field st_mtime is changed by file modifications, for example, by
mknod(2), truncate(2), utime(2) and write(2) (of more than zero bytes).
Moreover, st_mtime of a directory is changed by the creation or dele-
tion of files in that directory. The st_mtime field is not changed for
changes in owner, group, hard link count, or mode.
The field st_ctime is changed by writing or by setting inode informa-
tion (i.e., owner, group, link count, mode, etc.).
The following POSIX macros are defined to check the file type using the
st_mode field:
S_ISREG(m) is it a regular file?
S_ISDIR(m) directory?
S_ISCHR(m) character device?
S_ISBLK(m) block device?
S_ISFIFO(m) FIFO (named pipe)?
S_ISLNK(m) symbolic link? (Not in POSIX.1-1996.)
S_ISSOCK(m) socket? (Not in POSIX.1-1996.)
The following flags are defined for the st_mode field:
S_IFMT 0170000 bit mask for the file type bit fields
S_IFSOCK 0140000 socket
S_IFLNK 0120000 symbolic link
S_IFREG 0100000 regular file
S_IFBLK 0060000 block device
S_IFDIR 0040000 directory
S_IFCHR 0020000 character device
S_IFIFO 0010000 FIFO
S_ISUID 0004000 set-user-ID bit
S_ISGID 0002000 set-group-ID bit (see below)
S_ISVTX 0001000 sticky bit (see below)
S_IRWXU 00700 mask for file owner permissions
S_IRUSR 00400 owner has read permission
S_IWUSR 00200 owner has write permission
S_IXUSR 00100 owner has execute permission
S_IRWXG 00070 mask for group permissions
S_IRGRP 00040 group has read permission
S_IWGRP 00020 group has write permission
S_IXGRP 00010 group has execute permission
S_IRWXO 00007 mask for permissions for others (not in group)
S_IROTH 00004 others have read permission
S_IWOTH 00002 others have write permission
S_IXOTH 00001 others have execute permission
The set-group-ID bit (S_ISGID) has several special uses. For a direc-
tory it indicates that BSD semantics is to be used for that directory:
files created there inherit their group ID from the directory, not from
the effective group ID of the creating process, and directories created
there will also get the S_ISGID bit set. For a file that does not have
the group execution bit (S_IXGRP) set, the set-group-ID bit indicates
mandatory file/record locking.
The sticky bit (S_ISVTX) on a directory means that a file in that
directory can be renamed or deleted only by the owner of the file, by
the owner of the directory, and by a privileged process.
RETURN VALUE
On success, zero is returned. On error, -1 is returned, and errno is
set appropriately.
ERRORS
EACCES Search permission is denied for one of the directories in the
path prefix of path. (See also path_resolution(7).)
EBADF fd is bad.
EFAULT Bad address.
ELOOP Too many symbolic links encountered while traversing the path.
ENAMETOOLONG
path is too long.
ENOENT A component of path does not exist, or path is an empty string.
ENOMEM Out of memory (i.e., kernel memory).
ENOTDIR
A component of the path prefix of path is not a directory.
EOVERFLOW
path or fd refers to a file whose size, inode number, or number
of blocks cannot be represented in, respectively, the types
off_t, ino_t, or blkcnt_t. This error can occur when, for exam-
ple, an application compiled on a 32-bit platform without
-D_FILE_OFFSET_BITS=64 calls stat() on a file whose size exceeds
(1<<31)-1 bytes.
CONFORMING TO
These system calls conform to SVr4, 4.3BSD, POSIX.1-2001.
According to POSIX.1-2001, lstat() on a symbolic link need return valid
information only in the st_size field and the file-type component of
the st_mode field of the stat structure. POSIX.-2008 tightens the
specification, requiring lstat() to return valid information in all
fields except the permission bits in st_mode.
Use of the st_blocks and st_blksize fields may be less portable. (They
were introduced in BSD. The interpretation differs between systems,
and possibly on a single system when NFS mounts are involved.) If you
need to obtain the definition of the blkcnt_t or blksize_t types from
<sys/stat.h>, then define _XOPEN_SOURCE with the value 500 or greater
(before including any header files).
POSIX.1-1990 did not describe the S_IFMT, S_IFSOCK, S_IFLNK, S_IFREG,
S_IFBLK, S_IFDIR, S_IFCHR, S_IFIFO, S_ISVTX constants, but instead
demanded the use of the macros S_ISDIR(), etc. The S_IF* constants are
present in POSIX.1-2001 and later.
The S_ISLNK() and S_ISSOCK() macros are not in POSIX.1-1996, but both
are present in POSIX.1-2001; the former is from SVID 4, the latter from
SUSv2.
UNIX V7 (and later systems) had S_IREAD, S_IWRITE, S_IEXEC, where POSIX
prescribes the synonyms S_IRUSR, S_IWUSR, S_IXUSR.
Other systems
Values that have been (or are) in use on various systems:
hex name ls octal description
f000 S_IFMT 170000 mask for file type
0000 000000 SCO out-of-service inode; BSD
unknown type; SVID-v2 and XPG2 have
both 0 and 0100000 for ordinary file
1000 S_IFIFO p| 010000 FIFO (named pipe)
2000 S_IFCHR c 020000 character special (V7)
3000 S_IFMPC 030000 multiplexed character special (V7)
4000 S_IFDIR d/ 040000 directory (V7)
5000 S_IFNAM 050000 XENIX named special file with two
subtypes, distinguished by st_rdev
values 1, 2
0001 S_INSEM s 000001 XENIX semaphore subtype of IFNAM
0002 S_INSHD m 000002 XENIX shared data subtype of IFNAM
6000 S_IFBLK b 060000 block special (V7)
7000 S_IFMPB 070000 multiplexed block special (V7)
8000 S_IFREG - 100000 regular (V7)
9000 S_IFCMP 110000 VxFS compressed
9000 S_IFNWK n 110000 network special (HP-UX)
a000 S_IFLNK l@ 120000 symbolic link (BSD)
b000 S_IFSHAD 130000 Solaris shadow inode for ACL (not
seen by user space)
c000 S_IFSOCK s= 140000 socket (BSD; also "S_IFSOC" on VxFS)
d000 S_IFDOOR D> 150000 Solaris door
e000 S_IFWHT w% 160000 BSD whiteout (not used for inode)
0200 S_ISVTX 001000 sticky bit: save swapped text even
after use (V7)
reserved (SVID-v2)
On nondirectories: don't cache this
file (SunOS)
On directories: restricted deletion
flag (SVID-v4.2)
0400 S_ISGID 002000 set-group-ID on execution (V7)
for directories: use BSD semantics
for propagation of GID
0400 S_ENFMT 002000 System V file locking enforcement
(shared with S_ISGID)
0800 S_ISUID 004000 set-user-ID on execution (V7)
0800 S_CDF 004000 directory is a context dependent
file (HP-UX)
A sticky command appeared in Version 32V AT&T UNIX.
NOTES
Since kernel 2.5.48, the stat structure supports nanosecond resolution
for the three file timestamp fields. Glibc exposes the nanosecond com-
ponent of each field using names of the form st_atim.tv_nsec if the
_BSD_SOURCE or _SVID_SOURCE feature test macro is defined. These
fields are specified in POSIX.1-2008, and, starting with version 2.12,
glibc also exposes these field names if _POSIX_C_SOURCE is defined with
the value 200809L or greater, or _XOPEN_SOURCE is defined with the
value 700 or greater. If none of the aforementioned macros are
defined, then the nanosecond values are exposed with names of the form
st_atimensec. On file systems that do not support subsecond time-
stamps, the nanosecond fields are returned with the value 0.
On Linux, lstat() will generally not trigger automounter action,
whereas stat() will (but see fstatat(2)).
For most files under the /proc directory, stat() does not return the
file size in the st_size field; instead the field is returned with the
value 0.
Underlying kernel interface
Over time, increases in the size of the stat structure have led to
three successive versions of stat(): sys_stat() (slot __NR_oldstat),
sys_newstat() (slot __NR_stat), and sys_stat64() (new in kernel 2.4;
slot __NR_stat64). The glibc stat() wrapper function hides these
details from applications, invoking the most recent version of the sys-
tem call provided by the kernel, and repacking the returned information
if required for old binaries. Similar remarks apply for fstat() and
lstat().
EXAMPLE
The following program calls stat() and displays selected fields in the
returned stat structure.
#include <sys/types.h>
#include <sys/stat.h>
#include <time.h>
#include <stdio.h>
#include <stdlib.h>
int
main(int argc, char *argv[])
{
struct stat sb;
if (argc != 2) {
fprintf(stderr, "Usage: %s <pathname>\n", argv[0]);
exit(EXIT_FAILURE);
}
if (stat(argv[1], &sb) == -1) {
perror("stat");
exit(EXIT_FAILURE);
}
printf("File type: ");
switch (sb.st_mode & S_IFMT) {
case S_IFBLK: printf("block device\n"); break;
case S_IFCHR: printf("character device\n"); break;
case S_IFDIR: printf("directory\n"); break;
case S_IFIFO: printf("FIFO/pipe\n"); break;
case S_IFLNK: printf("symlink\n"); break;
case S_IFREG: printf("regular file\n"); break;
case S_IFSOCK: printf("socket\n"); break;
default: printf("unknown?\n"); break;
}
printf("I-node number: %ld\n", (long) sb.st_ino);
printf("Mode: %lo (octal)\n",
(unsigned long) sb.st_mode);
printf("Link count: %ld\n", (long) sb.st_nlink);
printf("Ownership: UID=%ld GID=%ld\n",
(long) sb.st_uid, (long) sb.st_gid);
printf("Preferred I/O block size: %ld bytes\n",
(long) sb.st_blksize);
printf("File size: %lld bytes\n",
(long long) sb.st_size);
printf("Blocks allocated: %lld\n",
(long long) sb.st_blocks);
printf("Last status change: %s", ctime(&sb.st_ctime));
printf("Last file access: %s", ctime(&sb.st_atime));
printf("Last file modification: %s", ctime(&sb.st_mtime));
exit(EXIT_SUCCESS);
}
SEE ALSO
access(2), chmod(2), chown(2), fstatat(2), readlink(2), utime(2), capa-
bilities(7), symlink(7)
COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2012-11-11 STAT(2)
Linux-Distributionen
Huschi als Linux-Admin