dracut.modules(category15-traffic.html) - phpMan

DRACUT.MODULES(7)                   dracut                   DRACUT.MODULES(7)

NAME
       dracut.modules - dracut modules
DESCRIPTION
       dracut uses a modular system to build and extend the initramfs image.
       All modules are located in /usr/lib/dracut/modules.d or in
       <git-src>/modules.d. The most basic dracut module is 99base. In 99base
       the initial shell script init is defined, which gets run by the kernel
       after initramfs loading. Although you can replace init with your own
       version of 99base, this is not encouraged. Instead you should use, if
       possible, the hooks of dracut. All hooks, and the point of time in
       which they are executed, are described in the section called "BOOT
       PROCESS STAGES".
       The main script, which creates the initramfs is dracut itsself. It
       parses all arguments and sets up the directory, in which everything is
       installed. It then executes all check, install, installkernel scripts
       found in the modules, which are to be processed. After everything is
       installed, the install directory is archived and compressed to the
       final initramfs image. All helper functions used by check, install and
       installkernel are found in in the file dracut-functions. These shell
       functions are available to all module installer (install,
       installkernel) scripts, without the need to source dracut-functions.
       A module can check the preconditions for install and installkernel with
       the check script. Also dependencies can be expressed with check. If a
       module passed check, install and installkernel will be called to
       install all of the necessary files for the module. To split between
       kernel and non-kernel parts of the installation, all kernel module
       related parts have to be in installkernel. All other files found in a
       module directory are module specific and mostly are hook scripts and
       udev rules.
BOOT PROCESS STAGES
       dracut modules can insert custom script at various points, to control
       the boot process. These hooks are plain directories containing shell
       scripts ending with ".sh", which are sourced by init. Common used
       functions are in dracut-lib.sh, which can be sourced by any script.
   Hook: cmdline
       The cmdline hook is a place to insert scripts to parse the kernel
       command line and prepare the later actions, like setting up udev rules
       and configuration files.
       In this hook the most important environment variable is defined: root.
       The second one is rootok, which indicates, that a module claimed to be
       able to parse the root defined. So for example, root=iscsi:.... will be
       claimed by the iscsi dracut module, which then sets rootok.
   Hook: pre-udev
       This hook is executed right after the cmdline hook and a check if root
       and rootok were set. Here modules can take action with the final root,
       and before udev has been run.
   Start Udev
       Now udev is started and the logging for udev is setup.
   Hook: pre-trigger
       In this hook, you can set udev environment variables with udevadm
       control --property=KEY=value or control the further execution of udev
       with udevadm.
   Trigger Udev
       udev is triggered by calling udevadm trigger, which sends add events
       for all devices and subsystems.
   Main Loop
       In the main loop of dracut loops until udev has settled and all scripts
       in initqueue/finished returned true. In this loop there are three
       hooks, where scripts can be inserted by calling /sbin/initqueue.
       Initqueue
           This hook gets executed every time a script is inserted here,
           regardless of the udev state.
       Initqueue settled
           This hooks (initqueue/settled) gets executed every time udev has
           settled.
       Initqueue timeout
           This hooks (initqueue/timeout) gets executed, when the main loop
           counter becomes half of the rd.retry counter.
       Initqueue finished
           This hook (initqueue/finished) is called after udev has settled and
           if all scripts herein return 0 the main loop will be ended.
           Abritary scripts can be added here, to loop in the initqueue until
           something happens, which a dracut module wants to wait for.
   Hook: pre-mount
       Before the root device is mounted all scripts in the hook pre-mount are
       executed. In some cases (e.g. NFS) the real root device is already
       mounted, though.
   Hook: mount
       This hook is mainly to mount the real root device.
   Hook: pre-pivot
       This hook is called before cleanup hook, This is a good place for
       actions other than cleanups which need to be called before pivot.
   Hook: cleanup
       This hook is the last hook and is called before init finally switches
       root to the real root device. This is a good place to clean up and kill
       processes not needed anymore.
   Cleanup and switch_root
       Init (or systemd) kills all udev processes, cleans up the environment,
       sets up the arguments for the real init process and finally calls
       switch_root. switch_root removes the whole filesystem hierarchy of the
       initramfs, chroot()s to the real root device and calls /sbin/init with
       the specified arguments.
       To ensure all files in the initramfs hierarchy can be removed, all
       processes still running from the initramfs should not have any open
       file descriptors left.
NETWORK INFRASTRUCTURE
       FIXME
WRITING A MODULE
       A simple example module is 96insmodpost, which modprobes a kernel
       module after udev has settled and the basic device drivers have been
       loaded.
       All module installation information is in the file module-setup.sh.
       First we create a check() function, which just exits with 0 indicating
       that this module should be included by default.
       check():
           return 0
       The we create the install() function, which installs a cmdline hook
       with priority number 20 called parse-insmodpost.sh. It also installs
       the insmodpost.sh script in /sbin.
       install():
           inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
           inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
       The pase-instmodpost.sh parses the kernel command line for a argument
       rd.driver.post, blacklists the module from being autoloaded and
       installs the hook insmodpost.sh in the initqueue/settled.
       parse-insmodpost.sh:
           for p in $(getargs rd.driver.post=); do
               echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
               _do_insmodpost=1
           done
           [ -n "$_do_insmodpost" ] && /sbin/initqueue --settled --unique --onetime /sbin/insmodpost.sh
           unset _do_insmodpost
       insmodpost.sh, which is called in the initqueue/settled hook will just
       modprobe the kernel modules specified in all rd.driver.post kernel
       command line parameters. It runs after udev has settled and is only
       called once (--onetime).
       insmodpost.sh:
           . /lib/dracut-lib.sh
           for p in $(getargs rd.driver.post=); do
               modprobe $p
           done
   module-setup.sh: check()
       check() is called by dracut to evaluate the inclusion of a dracut
       module in the initramfs.
       $hostonly
           If the $hostonly variable is set, then the module check() function
           should be in "hostonly" mode, which means, that the check() should
           only return 0, if the module is really needed to boot this specific
           host.
       check() should return with:
       0
           Include the dracut module in the initramfs.
       1
           Do not include the dracut module. The requirements are not
           fullfilled (missing tools, etc.)
       255
           Only include the dracut module, if another module requires it or if
           explicitly specified in the config file or on the argument list.
   module-setup.sh: depends()
       The function depends() should echo all other dracut module names the
       module depends on.
   module-setup.sh: cmdline()
       This function should print the kernel command line options needed to
       boot the current machine setup. It should start with a space and should
       not print a newline.
   module-setup.sh: install()
       The install() function is called to install everything non-kernel
       related. To install binaries, scripts, and other files, you can use the
       functions mentioned in [creation].
       To address a file in the current module directory, use the variable
       "$moddir".
   module-setup.sh: installkernel()
       In installkernel() all kernel related files should be installed. You
       can use all of the functions mentioned in [creation] to install files.
   Creation Functions
       inst_multiple [-o] <file> [ <file> ...]
           installs multiple binaries and files. If executables are specified
           without a path, dracut will search the path
           PATH=/usr/sbin:/sbin:/usr/bin:/bin for the binary. If the option
           "-o" is given as the first parameter, a missing file does not lead
           to an error.
       inst <src> [<dst>]
           installs one file <src> either to the same place in the initramfs
           or to an optional <dst>.
       inst_hook <hookdir> <prio> <src>
           installs an executable/script <src> in the dracut hook <hookdir>
           with priority <prio>.
       inst_rules <udevrule> [ <udevrule> ...]
           installs one ore more udev rules. Non-existant udev rules are
           reported, but do not let dracut fail.
       instmods <kernelmodule> [ <kernelmodule> ... ]
           instmods should be used only in the installkernel() function.
           instmods installs one or more kernel modules in the initramfs.
           <kernelmodule> can also be a whole subsystem, if prefixed with a
           "=", like "=drivers/net/team".
           instmods will not install the kernel module, if $hostonly is set
           and the kernel module is not currently needed by any
           /sys/.../uevent MODALIAS. To install a kernel module regardless of
           the hostonly mode use the form:
               hostonly='' instmods <kernelmodule>
   Initramfs Functions
       FIXME
   Network Modules
       FIXME
AUTHOR
       Harald Hoyer
SEE ALSO
       dracut(8)

dracut                            09/30/2020                 DRACUT.MODULES(7)