crypttab(glossar.html) - phpMan

CRYPTTAB(5)                        crypttab                        CRYPTTAB(5)

NAME
       crypttab - Configuration for encrypted block devices
SYNOPSIS
       /etc/crypttab
DESCRIPTION
       The /etc/crypttab file describes encrypted block devices that are set
       up during system boot.
       Empty lines and lines starting with the "#" character are ignored. Each
       of the remaining lines describes one encrypted block device, fields on
       the line are delimited by white space. The first two fields are
       mandatory, the remaining two are optional.
       Setting up encrypted block devices using this file supports three
       encryption modes: LUKS, TrueCrypt and plain. See cryptsetup(8) for more
       information about each mode. When no mode is specified in the options
       field and the block device contains a LUKS signature, it is opened as a
       LUKS device; otherwise, it is assumed to be in raw dm-crypt (plain
       mode) format.
       The first field contains the name of the resulting encrypted block
       device; the device is set up within /dev/mapper/.
       The second field contains a path to the underlying block device or
       file, or a specification of a block device via "UUID=" followed by the
       UUID.
       The third field specifies the encryption password. If the field is not
       present or the password is set to "none" or "-", the password has to be
       manually entered during system boot. Otherwise, the field is
       interpreted as a absolute path to a file containing the encryption
       password. For swap encryption, /dev/urandom or the hardware device
       /dev/hw_random can be used as the password file; using /dev/random may
       prevent boot completion if the system does not have enough entropy to
       generate a truly random encryption key.
       The fourth field, if present, is a comma-delimited list of options. The
       following options are recognized:
       discard
           Allow discard requests to be passed through the encrypted block
           device. This improves performance on SSD storage but has security
           implications.
       cipher=
           Specifies the cipher to use. See cryptsetup(8) for possible values
           and the default value of this option. A cipher with unpredictable
           IV values, such as "aes-cbc-essiv:sha256", is recommended.
       hash=
           Specifies the hash to use for password hashing. See cryptsetup(8)
           for possible values and the default value of this option.
       header=
           Use a detached (separated) metadata device or file where the LUKS
           header is stored. This option is only relevant for LUKS devices.
           See cryptsetup(8) for possible values and the default value of this
           option.
       keyfile-offset=
           Specifies the number of bytes to skip at the start of the key file.
           See cryptsetup(8) for possible values and the default value of this
           option.
       keyfile-size=
           Specifies the maximum number of bytes to read from the key file.
           See cryptsetup(8) for possible values and the default value of this
           option. This option is ignored in plain encryption mode, as the key
           file size is then given by the key size.
       key-slot=
           Specifies the key slot to compare the passphrase or key against. If
           the key slot does not match the given passphrase or key, but
           another would, the setup of the device will fail regardless. This
           option implies luks. See cryptsetup(8) for possible values. The
           default is to try all key slots in sequential order.
       luks
           Force LUKS mode. When this mode is used, the following options are
           ignored since they are provided by the LUKS header on the device:
           cipher=, hash=, size=.
       _netdev
           Marks this cryptsetup device as requiring network. It will be
           started after the network is available, similarly to
           systemd.mount(5) units marked with _netdev. The service unit to set
           up this device will be ordered between remote-fs-pre.target and
           remote-cryptsetup.target, instead of cryptsetup-pre.target and
           cryptsetup.target.
           Hint: if this device is used for a mount point that is specified in
           fstab(5), the _netdev option should also be used for the mount
           point. Otherwise, a dependency loop might be created where the
           mount point will be pulled in by local-fs.target, while the service
           to configure the network is usually only started after the local
           file system has been mounted.
       noauto
           This device will not be automatically unlocked on boot.
       nofail
           The system will not wait for the device to show up and be unlocked
           at boot, and not fail the boot if it does not show up.
       plain
           Force plain encryption mode.
       read-only, readonly
           Set up the encrypted block device in read-only mode.
       size=
           Specifies the key size in bits. See cryptsetup(8) for possible
           values and the default value of this option.
       sector-size=
           Specifies the sector size in bytes. See cryptsetup(8) for possible
           values and the default value of this option.
       swap
           The encrypted block device will be used as a swap device, and will
           be formatted accordingly after setting up the encrypted block
           device, with mkswap(8). This option implies plain.
           WARNING: Using the swap option will destroy the contents of the
           named partition during every boot, so make sure the underlying
           block device is specified correctly.
       tcrypt
           Use TrueCrypt encryption mode. When this mode is used, the
           following options are ignored since they are provided by the
           TrueCrypt header on the device or do not apply: cipher=, hash=,
           keyfile-offset=, keyfile-size=, size=.
           When this mode is used, the passphrase is read from the key file
           given in the third field. Only the first line of this file is read,
           excluding the new line character.
           Note that the TrueCrypt format uses both passphrase and key files
           to derive a password for the volume. Therefore, the passphrase and
           all key files need to be provided. Use tcrypt-keyfile= to provide
           the absolute path to all key files. When using an empty passphrase
           in combination with one or more key files, use "/dev/null" as the
           password file in the third field.
       tcrypt-hidden
           Use the hidden TrueCrypt volume. This option implies tcrypt.
           This will map the hidden volume that is inside of the volume
           provided in the second field. Please note that there is no
           protection for the hidden volume if the outer volume is mounted
           instead. See cryptsetup(8) for more information on this limitation.
       tcrypt-keyfile=
           Specifies the absolute path to a key file to use for a TrueCrypt
           volume. This implies tcrypt and can be used more than once to
           provide several key files.
           See the entry for tcrypt on the behavior of the passphrase and key
           files when using TrueCrypt encryption mode.
       tcrypt-system
           Use TrueCrypt in system encryption mode. This option implies
           tcrypt.
       timeout=
           Specifies the timeout for querying for a password. If no unit is
           specified, seconds is used. Supported units are s, ms, us, min, h,
           d. A timeout of 0 waits indefinitely (which is the default).
       x-systemd.device-timeout=
           Specifies how long systemd should wait for a device to show up
           before giving up on the entry. The argument is a time in seconds or
           explicitly specified units of "s", "min", "h", "ms".
       tmp
           The encrypted block device will be prepared for using it as /tmp;
           it will be formatted using mke2fs(8). This option implies plain.
           WARNING: Using the tmp option will destroy the contents of the
           named partition during every boot, so make sure the underlying
           block device is specified correctly.
       tries=
           Specifies the maximum number of times the user is queried for a
           password. The default is 3. If set to 0, the user is queried for a
           password indefinitely.
       verify
           If the encryption password is read from console, it has to be
           entered twice to prevent typos.
       At early boot and when the system manager configuration is reloaded,
       this file is translated into native systemd units by systemd-
       cryptsetup-generator(8).
EXAMPLE
       Example 1. /etc/crypttab example
       Set up four encrypted block devices. One using LUKS for normal storage,
       another one for usage as a swap device and two TrueCrypt volumes.
           luks       UUID=2505567a-9e27-4efe-a4d5-15ad146c258b
           swap       /dev/sda7       /dev/urandom       swap
           truecrypt  /dev/sda2       /etc/container_password  tcrypt
           hidden     /mnt/tc_hidden  /dev/null    tcrypt-hidden,tcrypt-keyfile=/etc/keyfile
SEE ALSO
       systemd(1), systemd-cryptsetup@.service(8), systemd-cryptsetup-
       generator(8), fstab(5), cryptsetup(8), mkswap(8), mke2fs(8)

systemd 219                                                        CRYPTTAB(5)