Test2::Hub(poll.html) - phpMan

Test2::Hub(3)         User Contributed Perl Documentation        Test2::Hub(3)

NAME
       Test2::Hub - The conduit through which all events flow.
SYNOPSIS
           use Test2::Hub;
           my $hub = Test2::Hub->new();
           $hub->send(...);
DESCRIPTION
       The hub is the place where all events get processed and handed off to
       the formatter. The hub also tracks test state, and provides several
       hooks into the event pipeline.
COMMON TASKS
   SENDING EVENTS
           $hub->send($event)
       The "send()" method is used to issue an event to the hub. This method
       will handle thread/fork sync, filters, listeners, TAP output, etc.
   ALTERING OR REMOVING EVENTS
       You can use either "filter()" or "pre_filter()", depending on your
       needs. Both have identical syntax, so only "filter()" is shown here.
           $hub->filter(sub {
               my ($hub, $event) = @_;
               my $action = get_action($event);
               # No action should be taken
               return $event if $action eq 'none';
               # You want your filter to remove the event
               return undef if $action eq 'delete';
               if ($action eq 'do_it') {
                   my $new_event = copy_event($event);
                   ... Change your copy of the event ...
                   return $new_event;
               }
               die "Should not happen";
           });
       By default, filters are not inherited by child hubs. That means if you
       start a subtest, the subtest will not inherit the filter. You can
       change this behavior with the "inherit" parameter:
           $hub->filter(sub { ... }, inherit => 1);
   LISTENING FOR EVENTS
           $hub->listen(sub {
               my ($hub, $event, $number) = @_;
               ... do whatever you want with the event ...
               # return is ignored
           });
       By default listeners are not inherited by child hubs. That means if you
       start a subtest, the subtest will not inherit the listener. You can
       change this behavior with the "inherit" parameter:
           $hub->listen(sub { ... }, inherit => 1);
   POST-TEST BEHAVIORS
           $hub->follow_up(sub {
               my ($trace, $hub) = @_;
               ... do whatever you need to ...
               # Return is ignored
           });
       follow_up subs are called only once, either when done_testing is
       called, or in an END block.
   SETTING THE FORMATTER
       By default an instance of Test2::Formatter::TAP is created and used.
           my $old = $hub->format(My::Formatter->new);
       Setting the formatter will REPLACE any existing formatter. You may set
       the formatter to undef to prevent output. The old formatter will be
       returned if one was already set. Only one formatter is allowed at a
       time.
METHODS
       $hub->send($event)
           This is where all events enter the hub for processing.
       $hub->process($event)
           This is called by send after it does any IPC handling. You can use
           this to bypass the IPC process, but in general you should avoid
           using this.
       $old = $hub->format($formatter)
           Replace the existing formatter instance with a new one. Formatters
           must be objects that implement a "$formatter->write($event)"
           method.
       $sub = $hub->listen(sub { ... }, %optional_params)
           You can use this to record all events AFTER they have been sent to
           the formatter. No changes made here will be meaningful, except
           possibly to other listeners.
               $hub->listen(sub {
                   my ($hub, $event, $number) = @_;
                   ... do whatever you want with the event ...
                   # return is ignored
               });
           Normally listeners are not inherited by child hubs such as
           subtests. You can add the "inherit => 1" parameter to allow a
           listener to be inherited.
       $hub->unlisten($sub)
           You can use this to remove a listen callback. You must pass in the
           coderef returned by the "listen()" method.
       $sub = $hub->filter(sub { ... }, %optional_params)
       $sub = $hub->pre_filter(sub { ... }, %optional_params)
           These can be used to add filters. Filters can modify, replace, or
           remove events before anything else can see them.
               $hub->filter(
                   sub {
                       my ($hub, $event) = @_;
                       return $event;    # No Changes
                       return;           # Remove the event
                       # Or you can modify an event before returning it.
                       $event->modify;
                       return $event;
                   }
               );
           If you are not using threads, forking, or IPC then the only
           difference between a "filter" and a "pre_filter" is that
           "pre_filter" subs run first. When you are using threads, forking,
           or IPC, pre_filters happen to events before they are sent to their
           destination proc/thread, ordinary filters happen only in the
           destination hub/thread.
           You cannot add a regular filter to a hub if the hub was created in
           another process or thread. You can always add a pre_filter.
       $hub->unfilter($sub)
       $hub->pre_unfilter($sub)
           These can be used to remove filters and pre_filters. The $sub
           argument is the reference returned by "filter()" or "pre_filter()".
       $hub->follow_op(sub { ... })
           Use this to add behaviors that are called just before the hub is
           finalized. The only argument to your codeblock will be a
           Test2::EventFacet::Trace instance.
               $hub->follow_up(sub {
                   my ($trace, $hub) = @_;
                   ... do whatever you need to ...
                   # Return is ignored
               });
           follow_up subs are called only once, ether when done_testing is
           called, or in an END block.
       $sub = $hub->add_context_acquire(sub { ... });
           Add a callback that will be called every time someone tries to
           acquire a context. It gets a single argument, a reference of the
           hash of parameters being used the construct the context. This is
           your chance to change the parameters by directly altering the hash.
               test2_add_callback_context_acquire(sub {
                   my $params = shift;
                   $params->{level}++;
               });
           This is a very scary API function. Please do not use this unless
           you need to.  This is here for Test::Builder and backwards
           compatibility. This has you directly manipulate the hash instead of
           returning a new one for performance reasons.
           Note Using this hook could have a huge performance impact.
           The coderef you provide is returned and can be used to remove the
           hook later.
       $hub->remove_context_acquire($sub);
           This can be used to remove a context acquire hook.
       $sub = $hub->add_context_init(sub { ... });
           This allows you to add callbacks that will trigger every time a new
           context is created for the hub. The only argument to the sub will
           be the Test2::API::Context instance that was created.
           Note Using this hook could have a huge performance impact.
           The coderef you provide is returned and can be used to remove the
           hook later.
       $hub->remove_context_init($sub);
           This can be used to remove a context init hook.
       $sub = $hub->add_context_release(sub { ... });
           This allows you to add callbacks that will trigger every time a
           context for this hub is released. The only argument to the sub will
           be the Test2::API::Context instance that was released. These will
           run in reverse order.
           Note Using this hook could have a huge performance impact.
           The coderef you provide is returned and can be used to remove the
           hook later.
       $hub->remove_context_release($sub);
           This can be used to remove a context release hook.
       $hub->cull()
           Cull any IPC events (and process them).
       $pid = $hub->pid()
           Get the process id under which the hub was created.
       $tid = $hub->tid()
           Get the thread id under which the hub was created.
       $hud = $hub->hid()
           Get the identifier string of the hub.
       $uuid = $hub->uuid()
           If UUID tagging is enabled (see Test2::API) then the hub will have
           a UUID.
       $ipc = $hub->ipc()
           Get the IPC object used by the hub.
       $hub->set_no_ending($bool)
       $bool = $hub->no_ending
           This can be used to disable auto-ending behavior for a hub. The
           auto-ending behavior is triggered by an end block and is used to
           cull IPC events, and output the final plan if the plan was
           'no_plan'.
       $bool = $hub->active
       $hub->set_active($bool)
           These are used to get/set the 'active' attribute. When true this
           attribute will force "hub->finalize()" to take action even if there
           is no plan, and no tests have been run. This flag is useful for
           plugins that add follow-up behaviors that need to run even if no
           events are seen.
   STATE METHODS
       $hub->reset_state()
           Reset all state to the start. This sets the test count to 0, clears
           the plan, removes the failures, etc.
       $num = $hub->count
           Get the number of tests that have been run.
       $num = $hub->failed
           Get the number of failures (Not all failures come from a test fail,
           so this number can be larger than the count).
       $bool = $hub->ended
           True if the testing has ended. This MAY return the stack frame of
           the tool that ended the test, but that is not guaranteed.
       $bool = $hub->is_passing
       $hub->is_passing($bool)
           Check if the overall test run is a failure. Can also be used to set
           the pass/fail status.
       $hub->plan($plan)
       $plan = $hub->plan
           Get or set the plan. The plan must be an integer larger than 0, the
           string 'no_plan', or the string 'skip_all'.
       $bool = $hub->check_plan
           Check if the plan and counts match, but only if the tests have
           ended. If tests have not ended this will return undef, otherwise it
           will be a true/false.
THIRD PARTY META-DATA
       This object consumes Test2::Util::ExternalMeta which provides a
       consistent way for you to attach meta-data to instances of this class.
       This is useful for tools, plugins, and other extensions.
SOURCE
       The source code repository for Test2 can be found at
       http://github.com/Test-More/test-more/.
MAINTAINERS
       Chad Granum <exodist AT cpan.org>
AUTHORS
       Chad Granum <exodist AT cpan.org>
COPYRIGHT
       Copyright 2019 Chad Granum <exodist AT cpan.org>.
       This program is free software; you can redistribute it and/or modify it
       under the same terms as Perl itself.
       See http://dev.perl.org/licenses/

perl v5.16.3                      2019-09-06                     Test2::Hub(3)