Date::Calc::Object(category15-traffic.html) - phpMan

Date::Calc::Object(3) User Contributed Perl DocumentationDate::Calc::Object(3)

NAME
       Date::Calc::Object - Object-oriented add-on for Date::Calc with
       overloaded operators
MOTTO
       Make frequent things easy and infrequent or hard things possible
PREFACE
       Note that you do NOT need to ""use Date::Calc qw(...);"" in addition to
       this module.
       Simply
         use Date::Calc::Object qw(...);
       INSTEAD OF
         use Date::Calc qw(...);
       with the same ""qw(...)"" as you would with the "Date::Calc" module,
       and then forget about "Date::Calc::Object" altogether.
       The rest of your existing code doesn't change at all.
       Note also that in order to create a new date object, you do not need to
       use
         $date_object = Date::Calc::Object->new(...);
       (but you may), and should use
         $date_object = Date::Calc->new(...);
       instead (saves you some typing and is a trifle faster).
SYNOPSIS
   Export tags
         :all  -  all functions from Date::Calc
         :aux  -  auxiliary functions shift_*
         :ALL  -  both :all and :aux
   Functions
       See Date::Calc(3) for a list of available functions.
         $year                          = shift_year(\@_);
         ($year,$mm,$dd)                = shift_date(\@_);
         ($hrs,$min,$sec)               = shift_time(\@_);
         ($year,$mm,$dd,$hrs,$min,$sec) = shift_datetime(\@_);
   Methods
         $old = Date::Calc->accurate_mode([FLAG]);
         $old = Date::Calc->normalized_mode([FLAG]);
         $old = Date::Calc->number_format([NUMBER|CODEREF]);
         $old = Date::Calc->delta_format([NUMBER|CODEREF]);  # global default
         $old = Date::Calc->date_format([NUMBER|CODEREF]);   # global default
         $old = Date::Calc->language([LANGUAGE]);            # global default - DEPRECATED
         $old = $date->accurate_mode([FLAG]);           # is global nevertheless!
         $old = $date->normalized_mode([FLAG]);         # is global nevertheless!
         $old = $date->number_format([NUMBER|CODEREF]); # is global nevertheless!
         $old = $date->delta_format([NUMBER|CODEREF]);  # individual override
         $old = $date->date_format([NUMBER|CODEREF]);   # individual override
         $old = $date->language([LANGUAGE]);            # individual override
         $flag = $date->is_delta();
         $flag = $date->is_date();
         $flag = $date->is_short(); # i.e., has no time part
         $flag = $date->is_long();  # i.e., has time part
         $flag = $date->is_valid();
         $date = Date::Calc->new([TYPE]);
         $date = Date::Calc->new([TYPE,]YEAR,MONTH,DAY[,HRS,MIN,SEC]);
         $date = Date::Calc->new($arrayref);
         $newdate = $somedate->new([TYPE]);
         $newdate = $somedate->new([TYPE,]YEAR,MONTH,DAY[,HRS,MIN,SEC]);
         $newdate = $somedate->new($arrayref);
         $datecopy = $date->clone();
         $targetdate->copy($sourcedate);
         $targetdate->copy($arrayref);
         $targetdate->copy(@list);
         ($year,$month,$day) = $date->date([TYPE]);
         ($year,$month,$day) = $date->date([TYPE,]YEAR,MONTH,DAY[,HRS,MIN,SEC]);
         ($year,$month,$day) = $date->date($arrayref);
         ([$hrs,$min,$sec])  = $date->time([TYPE]);
         ($hrs,$min,$sec)    = $date->time([TYPE,]HRS,MIN,SEC);
         ([$hrs,$min,$sec])  = $date->time($arrayref);
         ($year,$month,$day,$hrs,$min,$sec) =
             $date->datetime([TYPE]);
         ($year,$month,$day,$hrs,$min,$sec) =
             $date->datetime([TYPE,]YEAR,MONTH,DAY[,HRS,MIN,SEC]);
         $date  = Date::Calc->today([FLAG]);
         $date  = Date::Calc->now([FLAG]); # shorthand for --+
         $date  = Date::Calc->today_and_now([FLAG]); # <-----+
         $date  = Date::Calc->gmtime([time]);    # UTC/GMT
         $date  = Date::Calc->localtime([time]); # local time
         $delta = Date::Calc->tzoffset([time]);
         $date  = Date::Calc->time2date([time]); # UTC/GMT
         $date->today([FLAG]);         # updates the date part only
         $date->now([FLAG]);           # updates the time part only
         $date->today_and_now([FLAG]); # updates both date and time
         $date->gmtime([time]);        # updates both date and time (UTC/GMT)
         $date->localtime([time]);     # updates both date and time (local time)
         $delta->tzoffset([time]);     # updates both date and time
         $date->time2date([time]);     # updates both date and time (UTC/GMT)
         $time = Date::Calc->mktime();    # same as "$time = CORE::time();"
         $time = Date::Calc->date2time(); # same as "$time = CORE::time();"
         $time = $date->mktime();      # converts into Unix time (local time)
         $time = $date->date2time();   # converts into Unix time (UTC/GMT)
         $year    = $date->year([YEAR]);
         $month   = $date->month([MONTH]);
         $day     = $date->day([DAY]);
         $hours   = $date->hours([HRS]);
         $minutes = $date->minutes([MIN]);
         $seconds = $date->seconds([SEC]);
         $number = $date->number([NUMBER|CODEREF]);
         $string = $date->string([NUMBER|CODEREF][,LANGUAGE]);
         $delta->normalize(); # renormalizes a delta vector
   Overloaded Operators
         #####################################################
         # Scalar operands are always converted into a delta #
         # vector with that many days, i.e., [1,0,0,SCALAR]  #
         #####################################################
   Comparison Operators:
         if ($date1 <  $date2) { # compares date part only
         if ($date1 <= $date2) { # compares date part only
         if ($date1 >  $date2) { # compares date part only
         if ($date1 >= $date2) { # compares date part only
         if ($date1 == $date2) { # compares date part only
         if ($date1 != $date2) { # compares date part only
         $comp = $date1 <=> $date2; # compares date part only
         if ($date1 lt $date2) { # compares both date and time
         if ($date1 le $date2) { # compares both date and time
         if ($date1 gt $date2) { # compares both date and time
         if ($date1 ge $date2) { # compares both date and time
         if ($date1 eq $date2) { # compares both date and time
         if ($date1 ne $date2) { # compares both date and time
         $comp = $date1 cmp $date2; # compares both date and time
       Note that you can of course also compare two deltas, but not a date and
       a delta!
         ##################################################
         # Default TYPE for array refs in comparisons is: #
         # Same as other operand                          #
         ##################################################
         if ([2000,4,1] == $date) {
         if ($today > [2000,4,1]) {
         if ($now ge [2000,3,26,2,0,0]) {
         if ($delta == [18,0,0]) {
         if ($delta == -1) {
   Plus:
         $date2 = $date1 + $delta;
         $date2 = $delta + $date1;
         $date += $delta;
         $this = $date++;
         $next = ++$date;
         $delta3 = $delta1 + $delta2;
         $delta1 += $delta2;
         $delta += $date; # beware of implicit type change!
         $delta++;
         ++$delta;
         #####################################################
         # Default TYPE for array refs in '+' operations is: #
         # Opposite of other operand                         #
         #####################################################
         $date2 = [2000,3,26] + $delta;
         $date2 = $date1 + [+1,0,0];
         $date2 = [0,0,-1] + $date1;
         $date2 = $date1 + 1;
         $date += [0,0,+1];
         $date += 2;
         $delta3 = [1,+1,0,-1] + $delta2;
         $delta3 = $delta1 + [1,0,0,+1];
         $delta3 = $delta1 + 1;
         $delta += [1,0,+1,0];
         $delta += [2000,3,26]; # beware of implicit type change!
         $delta += 7;
   Unary Minus:
         $delta2 = -$delta1;
   Minus:
         $delta = $date2 - $date1;
         $date2 = $date1 - $delta;
         $date -= $delta;
         $date2 -= $date1; # beware of implicit type change!
         $this = $date--;
         $prev = --$date;
         $delta3 = $delta2 - $delta1;
         $delta2 -= $delta1;
         $delta--;
         --$delta;
         #####################################################
         # Default TYPE for array refs in '-' operations is: #
         # Always a date                                     #
         #####################################################
         $delta = $today - [2000,3,26];
         $delta = [2000,4,1] - $date;
         $date2 = [2000,3,26] - $delta;
         $date2 = $date1 - [1,0,0,+7];
         $date2 = $date1 - 7;
         $date -= [1,0,0,+1]; # better add [0,0,-1] instead!
         $date2 -= [2000,3,26]; # beware of implicit type change!
         $date2 -= 1;
         $delta3 = [1,0,+1,0] - $delta1;
         $delta3 = $delta2 - [1,0,0,-1];
         $delta -= [1,0,0,+1];
         $delta -= 7;
   Miscellaneous Operators:
         $string = "$date";
         $string = "$delta";
         print "$date\n";
         print "$delta\n";
         if ($date) { # date is valid
         if ($delta) { # delta is valid
         $days = abs($date);
         $diff = abs($delta); # can be negative!
         $diff = abs(abs($delta)); # always positive
DESCRIPTION
       o FLAG
         "FLAG" is either 0 (for "false") or 1 (for "true").
         In the case of ""accurate_mode()"" and ""normalized_mode()"", this
         switches the corresponding mode on and off (see further below for an
         explanation of what these are).
         In the case of ""today()"", ""now()"" and ""today_and_now()"", a
         "true" value indicates "GMT" (Greenwich Mean Time), as opposed to
         local time, which is the default.
       o NUMBER
         "NUMBER" is a number between 0 and 2 (for "number_format()" and
         "number()") or between 0 and 4 (for "delta_format()", "date_format()"
         and "string()"), indicating which of the three/five predefined
         formats, respectively, should be used for converting a date into
         numeric representation (needed for comparing dates, for instance) or
         string representation.
         Format #0 is the default at startup and the simplest of all (and
         should be fastest to calculate, too).
         The string representation of dates in format #0 also has the
         advantage of being sortable in chronological order (and of complying
         with ISO 8601).
         (The numeric formats are (trivially) always sortable in chronological
         order of course.)
         The other formats are (mostly) increasingly more sophisticated (in
         terms of esthetics and computation time) with increasing number
         (except for format #4):
           Delta number formats (short):
               0    13603
               1    13603
               2    13603
           Delta string formats (short):
               0    '+0+0+13603'
               1    '+0 +0 +13603'
               2    '+0Y +0M +13603D'
               3    '+0 Y +0 M +13603 D'
               4    '(0,0,13603)'
           Date number formats (short):
               0    20010401
               1    730576
               2    730576
           Date string formats (short):
               0    '20010401'
               1    '01-Apr-2001'
               2    'Sun 1-Apr-2001'
               3    'Sunday, April 1st 2001'
               4    '[2001,4,1]'
           Delta number formats (long):
               0    13603.012959
               1    13603.012959
               2    13603.0624884259
           Delta string formats (long):
               0    '+0+0+13603+1+29+59'
               1    '+0 +0 +13603 +1 +29 +59'
               2    '+0Y +0M +13603D +1h +29m +59s'
               3    '+0 Y +0 M +13603 D +1 h +29 m +59 s'
               4    '(0,0,13603,1,29,59)'
           Date number formats (long):
               0    20010401.082959
               1    730576.082959
               2    730576.354155093
           Date string formats (long):
               0    '20010401082959'
               1    '01-Apr-2001 08:29:59'
               2    'Sun 1-Apr-2001 08:29:59'
               3    'Sunday, April 1st 2001 08:29:59'
               4    '[2001,4,1,8,29,59]'
         If a number outside of the permitted range is specified, or if the
         value is not a code reference (see also the next section below for
         more details), the default format #0 is used instead.
       o CODEREF
         "CODEREF" is the reference of a subroutine which can be passed to the
         methods "number_format()", "delta_format()" and "date_format()" in
         order to install a callback function which will be called
         subsequently whenever a date (or delta) object needs to be
         (implicitly) converted into a number or string.
         This happens for instance when you compare two date objects, or when
         you put a date object reference in a string between double quotes.
         Such a "CODEREF" can also be passed to the methods "number()" and
         "string()" for explicitly converting a date object as desired.
       o LANGUAGE
         "LANGUAGE" is either a number in the range "[1..Languages()]", or one
         of the strings ""Language_to_Text(1..Languages())"" (see also
         Date::Calc(3)).
       o TYPE
         "TYPE" is 0 for a regular date and 1 for a delta vector (a list of
         year, month, day and optionally hours, minutes and seconds offsets).
       o Storage
         "Date::Calc" objects are implemented as two nested arrays.
         The "blessed" array (whose reference is the object reference you
         receive when calling the "new()" method) contains an anonymous array
         at position zero and the object's data in its remaining fields.
         The embedded anonymous array is used for storing the object's
         attributes (flags).
         Dates and delta vectors always comprise either 3 or 6 data values:
         Year, month, day plus (optionally) hours, minutes and seconds.
         These values are stored in the "blessed" array at positions 1..3 or
         1..6, respectively.
         An object without the time values is therefore called "short", and an
         object having time values is called "long" throughout this manual.
         Hint: Whenever possible, if you do not need the time values, omit
         them, i.e., always use the "short" form of the object if possible,
         this will speed up calculations a little (the short form uses
         different (faster) functions for all calculations internally).
         The embedded anonymous array contains various flags:
         At position zero, it contains the "TYPE" indicator which determines
         whether the object is a date or a delta vector.
         At position 1, the object stores the "NUMBER" of one of the delta
         vector formats, or the reference of a callback function which
         converts the contents of the object into string representation if
         it's a delta vector, or "undef" if the global settings apply.
         At position 2, the object stores the "NUMBER" of one of the date
         formats, or the reference of a callback function which converts the
         contents of the object into string representation if it's a date, or
         "undef" if the global settings apply.
         At position 3, the object stores the "LANGUAGE" to be used for all
         conversions into strings (where applicable), or "undef" if the global
         language setting applies.
         Note that your callback functions (see the section "Callback
         Functions" further below for more details) should not pay attention
         to this value at position 3, because they get a parameter which tells
         them which language to use (this is necessary in order to allow
         temporary overrides).
         If your callback handlers use the "*_to_Text*" functions (or any
         other language-dependent function) from the "Date::Calc" module, your
         handlers should pass on this language parameter to these functions
         (and not the value from position 3).
         Be reminded though that you should NEVER access the object's internal
         data directly, i.e., through their positional numbers, but ALWAYS
         through their respective accessor methods, e.g.:
                 year()
                 month()
                 day()
                 hours()
                 minutes()
                 seconds()
                 date()
                 time()
                 datetime()
                 is_delta()
                 is_date()
                 is_short()
                 is_long()
                 delta_format()
                 date_format()
                 language()
         And although position 4 and onward in the embedded anonymous array is
         currently unused, it might not stay so in future releases of this
         module.
         Therefore, in case you need more attributes in a subclass of the
         "Date::Calc[::Object]" class, I suggest using values starting at
         positions a bit further up, e.g. 6, 8 or 10.
       o Invalid Dates
         Only "new()" allows to create objects containing possibly invalid
         dates (needed for reading in and evaluating user input, for example).
       o Usage
         The methods
                 accurate_mode()
                 normalized_mode()
                 number_format()
                 delta_format()
                 date_format()
                 language()
                 date()
                 time()
                 datetime()
                 year()
                 month()
                 day()
                 hours()
                 minutes()
                 seconds()
         are used for reading as well as for setting attributes. They simply
         return the values in question if they are called without parameters.
         The methods
                 accurate_mode()
                 normalized_mode()
                 number_format()
                 delta_format()
                 date_format()
                 language()
         always return the previous value if a new value is set. This allows
         you to change these values temporarily and to restore their old value
         afterwards more easily (but you can also override the "format" and
         "language" settings directly when calling the "number()" or
         "string()" method).
         The methods
                 date()
                 time()
                 datetime()
                 year()
                 month()
                 day()
                 hours()
                 minutes()
                 seconds()
         always return the new values when the corresponding values have been
         changed.
         The method "date()" NEVER returns the time values (hours, minutes,
         seconds) even if they have just been set using this method (which the
         method optionally allows). Otherwise it would be very hard to predict
         the exact number of values it returns, which might lead to errors
         (wrong number of parameters) elsewhere in your program.
         The method "datetime()" ALWAYS returns the time values (hours,
         minutes, seconds) even if the object in question lacks a time part.
         In that case, zeros are returned for hours, minutes and seconds
         instead (but the stored time part is left unchanged, whether it
         exists or not).
         If you do not provide values for hours, minutes and seconds when
         using the method "date()" to set the values for year, month and day,
         the time part will not be changed (whether it exists or not).
         If you do not provide values for hours, minutes and seconds when
         using the method "datetime()" to set the values for year, month and
         day, the time part will be filled with zeros (the time part will be
         created if necessary).
         If the object is short, i.e., if it does not have any time values,
         the method "time()" returns an empty list.
         If the object is short and the methods "hours()", "minutes()" or
         "seconds()" are used to set any of these time values, the object is
         automatically promoted to the "long" form, and the other two time
         values are filled with zeros.
         The following methods can also return "undef" under certain
         circumstances:
                 delta_format()
                 date_format()
                 language()
                 is_delta()
                 is_date()
                 is_short()
                 is_long()
                 is_valid()
                 hours()
                 minutes()
                 seconds()
                 number()
                 string()
         The methods "delta_format()", "date_format()" and "language()" return
         "undef" when they are called as object methods and no individual
         override has been defined for the object in question.
         The "is_*()" predicate methods return "undef" if the object in
         question does not have the expected internal structure. This can
         happen for instance when you create an empty object with "new()".
         When called without parameters, the methods "hours()", "minutes()"
         and "seconds()" return "undef" if the object in question does not
         have a time part.
         The methods "number()" and "string()" return "undef" if the object in
         question is not valid (i.e., if "is_valid()" returns "undef" or
         false).
         And finally, the methods
                 copy()
                 today()
                 now()
                 today_and_now()
                 gmtime()
                 localtime()
                 tzoffset()
                 time2date()
                 normalize()
         return the object reference of the (target) object in question for
         convenience.
       o Import/Export
         Note that you can import and export Unix "time" values using the
         methods "gmtime()", "localtime()", "mktime()", "date2time()" and
         "time2date()", both as local time or as UTC/GMT.
       o Accurate Mode and Normalized Mode
         The method "accurate_mode()" controls the internal flag which
         determines which of two fundamental modes of operation is used.
         When set to true (the default at startup), delta vectors are
         calculated to give the exact difference in days between two dates.
         The "year" and "month" entries in the resulting delta vector are
         always zero in that case.
         If "accurate mode" is switched off (when the corresponding flag is
         set to false), delta vectors are calculated with year and month
         differences.
         E.g., the difference between "[1999,12,6]" and "[2000,6,24]" is "[+0
         +0 +201]" (plus 201 days) in accurate mode and "[+1 -6 +18]" (plus
         one year, minus 6 months, plus 18 days) when accurate mode is
         switched off, and is "[+0 +6 +18]" (plus 6 months, plus 18 days) if
         additionally, "normalized mode" is switched on.
         The delta vector is calculated by simply taking the difference in
         years, the difference in months and the difference in days (if
         "accurate mode" is switched off and if "normalized mode" has not been
         switched on). This is called "one-by-one" semantics or "year-month-
         day mode"; "YMD mode" for short.
         When "normalized mode" is switched on (while "accurate mode" is
         switched off), the delta vector is calculated in a more complex way
         involving the functions ""Add_Delta_YM()"" (for "truncation") and
         ""Delta_Days()"".
         Moreover, the result is normalized, i.e., the return values are
         guaranteed to all have the same sign (or to be zero), and to all be
         "minimal", i.e., not to exceed the ranges "[-11..+11]" for months,
         "[-30..+30]" for days, "[-23..+23]" for hours and "[-59..+59]" for
         minutes and seconds.
         The rule is to add these result values to a date in a left-to-right
         order, and to truncate invalid intermediate dates, such as e.g.
         "[2009,2,29]", to the last valid day of that same month, e.g.
         "[2009,2,28]". This is called "left-to-right with truncation"
         semantics or "normalized mode"; "N_YMD mode" for short.
         The method "normalized_mode()" controls the internal flag which
         determines whether "YMD mode" is used (the default at startup, for
         reasons of backward compatibility) or "N_YMD mode".
         Note that also for reasons of backward compatibility, this flag only
         has effect when "accurate mode" is switched off.
         Both flags can be set and reset independently from each other,
         however.
         Therefore, at startup, you can for instance switch "normalized mode"
         on, without having any immediate effect, and switch off "accurate
         mode" later, which instantly also causes "normalized mode" to spring
         into effect.
         Because years and months have varying lengths in terms of days, the
         "YMD" and "N_YMD" modes are less accurate than "accurate mode",
         because these modes depend on the context of the two dates of which
         the delta vector is the difference. Added to a different date, a
         delta vector calculated in "YMD mode" or "N_YMD mode" may yield a
         different offset in terms of days, i.e., the final result may
         sometimes vary seemingly unpredictably (or in other situations may
         give you the expected result, at the expense of actually representing
         a varying difference in days, determined exclusively by context).
         Beware also that - for the same reason - the absolute value
         (""abs()"") of a delta vector returns a fictitious number of days if
         the delta vector contains non-zero values for "year" and/or "month"
         (see also the next section "Absolute Value" below for more details).
         Example:
         The difference between "[2000,1,1]" and "[2000,3,1]" is "[+0 +0 +60]"
         in "accurate mode" and "[+0 +2 +0]" in "YMD mode" (in this "benign"
         example, the result is the same in "YMD mode" and in "N_YMD mode").
         When added to the date "[2000,4,1]", the "accurate" delta vector
         yields the date "[2000,5,31]", whereas the "YMD mode" delta vector
         yields the date "[2000,6,1]" (which is actually a difference of 61
         days).
         Moreover, when added to the date "[1999,1,1]", the "accurate" delta
         vector yields the date "[1999,3,2]", whereas the "inaccurate" "YMD
         Mode" delta vector yields the date "[1999,3,1]" (which is actually a
         difference of 59 days).
         Depending on what you want, either mode may suit you better.
       o Absolute Value
         Note that ""abs($date)"" and ""abs($delta)"" are just shorthands for
         ""$date->number()"" and ""$delta->number()"".
         The operator ""abs()"", when applied to a date or delta vector,
         returns the corresponding number of days (see below for an exception
         to this), with the time part (if available) represented by a fraction
         after the decimal point.
         In the case of dates, the absolute value (to the left of the decimal
         point) is the number of days since the 1st of January 1 A.D. (by
         extrapolating the Gregorian calendar back beyond its "natural" limit
         of 1582 A.D.) PLUS ONE.
         (I.e., the absolute value of the 1st of January 1 A.D. is 1.)
         Exception:
         If the "NUMBER" or "number_format()" is set to 0 (the default
         setting), the absolute value of a date to the left of the decimal
         point is "yyyymmdd", i.e., the number in which the uppermost four
         digits correspond to the year, the next lower two digits to the month
         and the lowermost two digits to the day.
         In the case of delta vectors, the absolute value (to the left of the
         decimal point) is simply the difference in days (but see also below).
         Note that the absolute value of a delta vector can be negative!
         If you want a positive value in all cases, apply the ""abs()""
         operator again, i.e., ""$posdiff = abs(abs($delta));"".
         If the delta vector contains non-zero values for "year" and/or
         "month" (see also the discussion of "Accurate Mode" in the section
         above), an exact representation in days cannot be calculated, because
         years and months do not have fixed equivalents in days.
         If nevertheless you attempt to calculate the absolute value of such a
         delta vector, a fictitious value is returned, which is calculated by
         simply multiplying the year difference with 12, adding the month
         difference, multiplying this sum with 31 and finally adding the day
         difference.
         Beware that because of this, the absolute values of delta vectors are
         not necessarily contiguous.
         Moreover, since there is more than one way to express the difference
         between two dates, comparisons of delta vectors may not always yield
         the expected result.
         Example:
         The difference between the two dates "[2000,4,30]" and "[2001,5,1]"
         can be expressed as "[+1 +1 -29]", or as "[+1 +0 +1]".
         The first delta vector has an absolute value of 374, whereas the
         latter delta vector has an absolute value of only 373 (while the true
         difference in days between the two dates is 366).
         If the date or delta vector has a time part, the time is returned as
         a fraction of a full day after the decimal point as follows:
         If the "NUMBER" or "number_format()" is set to 0 (the default
         setting) or 1, this fraction is simply ".hhmmss", i.e., the two
         digits after the decimal point represent the hours, the next two
         digits the minutes and the last two digits the seconds.
         Note that you cannot simply add and subtract these values to yield
         meaningful dates or deltas again, you can only use them for
         comparisons (equal, not equal, less than, greater than, etc.). If you
         want to add/subtract, read on:
         Only when the "NUMBER" or "number_format()" is set to 2, this
         fraction will be the equivalent number of seconds (i.e., "(((hours *
         60) + minutes) * 60) + seconds") divided by the number of seconds in
         a full day (i.e., "24*60*60 = 86400"), or "0/86400", "1/86400", ... ,
         "86399/86400".
         In other words, the (mathematically correct) fraction of a day.
         You can safely perform arithmetics with these values as far as the
         internal precision of your vendor's implementation of the C run-time
         library (on which Perl depends) will permit.
       o Renormalizing Delta Vectors
         When adding or subtracting delta vectors to/from one another, the
         addition or subtraction takes place component by component.
         Example:
           [+0 +0 +0 +3 +29 +50] + [+0 +0 +0 +0 +55 +5] = [+0 +0 +0 +3 +84 +55]
           [+0 +0 +0 +3 +29 +50] - [+0 +0 +0 +0 +55 +5] = [+0 +0 +0 +3 -26 +45]
         This may result in time values outside the usual ranges ("[-23..+23]"
         for hours and "[-59..+59]" for minutes and seconds).
         Note that even though the delta value for days will often become
         quite large, it is impossible to renormalize this value because there
         is no constant conversion factor from days to months (should it be
         28, 29, 30 or 31?).
         If accurate mode (see further above for what that is) is switched
         off, delta vectors can also contain non-zero values for years and
         months. If you add or subtract these, the value for months can lie
         outside the range "[-11..11]", which isn't wrong, but may seem funny.
         Therefore, the "normalize()" method will also renormalize the
         "months" value, if and only if accurate mode has been switched off.
         (!)
         (Hence, switch accurate mode ON temporarily if you DON'T want the
         renormalization of the "months" value to happen.)
         If you want to force the time values from the example above back into
         their proper ranges, use the "normalize()" method as follows:
           print "[$delta]\n";
           $delta->normalize();
           print "[$delta]\n";
         This will print
           [+0 +0 +0 +3 +84 +55]
           [+0 +0 +0 +4 +24 +55]
         for the first and
           [+0 +0 +0 +3 -26 +45]
           [+0 +0 +0 +2 +34 +45]
         for the second delta vector from the example further above.
         Note that the values for days, hours, minutes and seconds are
         guaranteed to have the same sign after the renormalization.
         Under "normal" circumstances, i.e., when accurate mode is on (the
         default), this method only has an effect on the time part of the
         delta vector.
         If the delta vector in question does not have a time part, nothing
         happens.
         If accurate mode is off, the "months" value is also normalized, i.e.,
         if it lies outside of the range "[-11..11]", integer multiples of 12
         are added to the "years" value and subtracted from the "months"
         value. Moreover, the "months" value is guaranteed to have the same
         sign as the values for days, hours, minutes and seconds, unless the
         "months" value is zero or the values for days, hours, minutes and
         seconds are all zero.
         If the object in question is a date and if warnings are enabled, the
         message "normalizing a date is a no-op" will be printed to STDERR.
         If the object in question is not a valid "Date::Calc" object, nothing
         happens.
         The method returns its object's reference, which allows chaining of
         method calls, as in the following example:
           @time = $delta->normalize()->time();
       o Callback Functions
         Note that you are not restricted to the built-in formats (numbered
         from 0 to 2 for "number_format()" and "number()" and from 0 to 4 for
         "delta_format()", "date_format()" and "string()") for converting a
         date or delta object into a number or string.
         You can also provide your own function(s) for doing so, in order to
         suit your own taste or needs, by passing a subroutine reference to
         the appropriate method, i.e., "number_format()", "number()",
         "delta_format()", "date_format()" and "string()".
         You can pass a handler to only one or more of these methods, or to
         all of them, as you like. You can use different callback functions,
         or the same for all.
         In order to facilitate the latter, and in order to make the decoding
         of the various cases easier for you, the callback function receives a
         uniquely identifying function code as its second parameter:
           0  =  TO_NUMBER | IS_DATE  | IS_SHORT  (number[_format])
           1  =  TO_NUMBER | IS_DATE  | IS_LONG   (number[_format])
           2  =  TO_NUMBER | IS_DELTA | IS_SHORT  (number[_format])
           3  =  TO_NUMBER | IS_DELTA | IS_LONG   (number[_format])
           4  =  TO_STRING | IS_DATE  | IS_SHORT  (string|date_format)
           5  =  TO_STRING | IS_DATE  | IS_LONG   (string|date_format)
           6  =  TO_STRING | IS_DELTA | IS_SHORT  (string|delta_format)
           7  =  TO_STRING | IS_DELTA | IS_LONG   (string|delta_format)
         The first parameter of the callback function is of course the
         reference of the object in question itself (therefore, the callback
         function can actually be an object method - but not a class method,
         for obvious reasons).
         The third parameter is the number of the language (in the range
         "[1..Languages()]") which you should always pass along when using any
         of the following functions from the "Date::Calc" module in your
         handler:
         "Decode_Month()", "Decode_Day_of_Week()", "Compressed_to_Text()",
         "Date_to_Text()", "Date_to_Text_Long()", "Calendar()",
         "Month_to_Text()", "Day_of_Week_to_Text()",
         "Day_of_Week_Abbreviation()", "Decode_Date_EU()", "Decode_Date_US()",
         "Decode_Date_EU2()", "Decode_Date_US2()", "Parse_Date()".
         The callback handler should return the resulting number or string, as
         requested.
         BEWARE that you should NEVER rely upon any knowledge of the object's
         internal structure, as this may be subject to change!
         ALWAYS use the test and access methods provided by this module!
         Example:
           sub handler
           {
               my($self,$code,$lang) = @_;
               if    ($code == 0) # TO_NUMBER | IS_DATE  | IS_SHORT
               {
                   return Date_to_Days( $self->date() );
               }
               elsif ($code == 1) # TO_NUMBER | IS_DATE  | IS_LONG
               {
                   return Date_to_Days( $self->date() ) +
                                    ( ( $self->hours() * 60 +
                                        $self->minutes() ) * 60 +
                                        $self->seconds() ) / 86400;
               }
               elsif ($code == 2) # TO_NUMBER | IS_DELTA | IS_SHORT
               {
                   return ( $self->year() * 12 +
                            $self->month() ) * 31 +
                            $self->day();
               }
               elsif ($code == 3) # TO_NUMBER | IS_DELTA | IS_LONG
               {
                   return ( $self->year() * 12 +
                            $self->month() ) * 31 +
                            $self->day() +
                        ( ( $self->hours() * 60 +
                            $self->minutes() ) * 60 +
                            $self->seconds() ) / 86400;
               }
               elsif ($code == 4) # TO_STRING | IS_DATE  | IS_SHORT
               {
                   return join( "/", $self->date() );
               }
               elsif ($code == 5) # TO_STRING | IS_DATE  | IS_LONG
               {
                   return join( "/", $self->date() ) . " " .
                          join( ":", $self->time() );
               }
               elsif ($code == 6) # TO_STRING | IS_DELTA | IS_SHORT
               {
                   return join( "|", $self->date() );
               }
               elsif ($code == 7) # TO_STRING | IS_DELTA | IS_LONG
               {
                   return join( "|", $self->datetime() );
               }
               else
               {
                   die "internal error";
               }
           }
           Date::Calc->number_format(\&handler);
           Date::Calc->delta_format(\&handler);
           Date::Calc->date_format(\&handler);
         This sets our handler to take care of all automatic conversions, such
         as needed when comparing dates or when interpolating a string in
         double quotes which contains a date object.
         To deactivate a handler, simply pass a valid format number to the
         method in question, e.g.:
           Date::Calc->number_format(0);
           Date::Calc->delta_format(2);
           Date::Calc->date_format(3);
         When calling the "number()" or "string()" method explicitly, you can
         pass a different format number (than the global setting), like this:
           $number = $date->number(2);
           $string = $date->string(1);
         You can also pass a handler's reference, like so:
           $number = $date->number(\&handler);
           $string = $date->string(\&handler);
         This overrides the global setting and the individual object's local
         setting for the duration of the call of "number()" or "string()" (but
         doesn't change the global or local settings themselves).
         Moreover, you can also define individual overrides for the date and
         the delta vector formats (but not the number format) for individual
         objects, e.g.:
           $date->delta_format(1);
           $date->date_format(2);
           $date->delta_format(\&handler);
           $date->date_format(\&handler);
         In order to deactivate an individual handler for an object, and/or in
         order to deactivate any override altogether (so that the global
         settings apply again), you have to pass "undef" explicitly to the
         method in question:
           $date->delta_format(undef);
           $date->date_format(undef);
         You can also define a language for individual objects (see the next
         section immediately below for more details).
         If such an individual language override has been set, it will be
         passed to your callback handlers as the third parameter (in the case
         of "string" conversions, but not in the case of "number"
         conversions).
         Otherwise, the global settings as defined by "Language($lang);" or
         "Date::Calc-"language($lang);> will be passed to your handler.
       o Languages
         Note that this module is completely transparent to the setting of a
         language in "Date::Calc". This means that you can choose a language
         in "Date::Calc" (with the "Language()" function) and all dates
         subsequently printed by this module will automatically be in that
         language - provided that you use the built-in formats of this module,
         or that you pass the third parameter of the callback funtion to the
         funtions of the "Date::Calc" module which accept it.
         However, this global language setting can be overridden for
         individual date (or delta) objects by using the OBJECT method
             $oldlang = $date->language($newlang);
         (The global setting is not altered by this in any way.)
         In order to deactivate such an individual language setting (so that
         the global setting applies again), simply pass the value "undef"
         explicitly to the "language()" object method:
           $date->language(undef);
         The CLASS method
             $oldlang = Date::Calc->language($newlang);
         is just a convenient wrapper around the "Language()" function, which
         allows you to enter language numbers (as returned by the
         "Decode_Language()" function) or strings (as returned by the
         "Language_to_Text()" function), whatever you prefer.
         The "language()" method (both class and object) always returns the
         NAME (one of ""Language_to_Text(1..Languages())"") of the current
         setting (and never its number).
         BEWARE that in order to avoid possible conflicts between threads or
         modules running concurrently, you should NEVER use the global
         function "Language($lang);" or the class method
         "Date::Calc-"language($lang);> in this module!
         The class method is retained only for backward compatibility and for
         convenience in stand-alone applications when it is guaranteed that no
         such conflicts can arise.
         But you should probably avoid to use global settings anyway, because
         it may be especially troublesome to fix your code later when suddenly
         the need arises to use your code with threads or when your code needs
         to use other modules which also use "Date::Calc" (with different
         settings!).
         By exclusively using local settings, you are making your code
         invulnerable against other, concurrent modules also using
         "Date::Calc" which still use global settings.
       o Exported Functions
         The "Date::Calc::Object" package imports ":all" functions exported by
         the "Date::Calc" module and re-exports them, for conveniency.
         This allows you to write
           use Date::Calc::Object qw(...);
         instead of
           use Date::Calc qw(...);
         but with exactly the same semantics. The difference is that the
         object-oriented frontend is loaded additionally in the first case.
         As with "Date::Calc" you can use the ":all" tag to import all of
         "Date::Calc"'s functions:
           use Date::Calc::Object qw(:all);
         In addition to the functions exported by "Date::Calc", the
         "Date::Calc::Object" package offers some utility functions of its own
         for export:
             $year                          = shift_year(\@_);
             ($year,$mm,$dd)                = shift_date(\@_);
             ($hrs,$min,$sec)               = shift_time(\@_);
             ($year,$mm,$dd,$hrs,$min,$sec) = shift_datetime(\@_);
         These functions enable your subroutines or methods to accept a
         "Date::Calc" (or subclass) date object, an (anonymous) array or a
         list (containing the necessary values) as parameters INTERCHANGEABLY.
         You can import all of these auxiliary functions by using an ":aux"
         tag:
           use Date::Calc::Object qw(:aux);
         If you want to import both all of the "Date::Calc" functions as well
         as all these auxiliary functions, use the ":ALL" tag:
           use Date::Calc::Object qw(:ALL);
       o Subclassing
         In case you want to subclass "Date::Calc" objects and to add new
         attributes of your own, it is recommended that you proceed as follows
         (the following will be considered as a part of the module's "contract
         of use" - which might be subject to change in the future, however):
         Define a constant for the index of each attribute you want to add,
         currently starting no lower than "4", at the top of your subclass:
             use constant ATTRIB1 => 4;
             use constant ATTRIB2 => 5;
             use constant ATTRIB3 => 6;
             ...
         It is recommended that you use constants (which are easy to change),
         because I someday might want to require the element with index "4"
         for a new attribute of my own... ":-)"
         Then access your attributes like so (e.g. after calling ""$self =
         SUPER->new();"" in your constructor method):
             $self->[0][ATTRIB1] = 'value1';
             $self->[0][ATTRIB2] = 'value2';
             $self->[0][ATTRIB3] = 'value3';
             ...
         Beware that if you put anything other than numbers or strings into
         your attributes, the methods "clone()" and "copy()" might not work as
         expected anymore!
         Especially if your attributes contain references to other data
         structures, only the references will be copied, but not the data
         structures themselves.
         This may not be what you want.
         (You will have to override these two methods and write some of your
         own if not.)
         In order for the overloaded operators and the "shift_*()" auxiliary
         functions from the "Date::Calc::Object" package to work properly (the
         latter of which are heavily used in the "Date::Calendar[::Year]"
         modules, for instance), the package name of your subclass (= the one
         your objects will be blessed into) is REQUIRED to contain a "::".
         Note that you should ONLY subclass "Date::Calc", NEVER
         "Date::Calc::Object", since subclassing the latter is less efficient
         (because "Date::Calc::Object" is just an empty class which inherits
         from "Date::Calc" - subclassing "Date::Calc::Object" would thus just
         introduce an additional name space layer to search during Perl's
         runtime method binding process).
         If you give your subclass a package name below/inside the "Date::"
         namespace, you will also benefit from the fact that all error
         messages produced by the "Date::Calc[::Object]" module (and also the
         "Date::Calendar[::Year]" modules, by the way) will appear to have
         originated from the place outside of all ""/^Date::/"" modules
         (including yours) where one of the "Date::" modules was first called
         - i.e., all errors are always blamed on the user, no matter how
         deeply nested inside the "Date::" modules they occur, and do not
         usually refer to places inside any of the "Date::" modules (this
         assumes that there are no bugs in the "Date::" modules, and that all
         errors are always the user's fault ":-)").
         Moreover, your module's own error messages will behave in the same
         way if you ""use Carp::Clan qw(^Date::);"" at the top of your module
         and if you produce all error messages using "carp()" and "croak()"
         (instead of "warn()" and "die()", respectively).
EXAMPLES
       1)
            # Switch to summer time:
            $now = Date::Calc->now();
            if (($now ge [2000,3,26,2,0,0]) and
                ($now lt [2000,3,26,3,0,0]))
            {
                $now += [0,0,0,1,0,0];
            }
       2)
            use Date::Calc::Object qw(:all);
            Date::Calc->date_format(3);
            $date = 0;
            while (!$date)
            {
                print "Please enter the date of your birthday (day-month-year): ";
                $date = Date::Calc->new( Decode_Date_EU( scalar(<STDIN>) ) );
                if ($date)
                {
                    $resp = 0;
                    while ($resp !~ /^\s*[YyNn]/)
                    {
                        print "Your birthday is: $date\n";
                        print "Is that correct? (yes/no) ";
                        $resp = <STDIN>;
                    }
                    $date = 0 unless ($resp =~ /^\s*[Yy]/)
                }
                else
                {
                    print "Unable to parse your birthday. Please try again.\n";
                }
            }
            if ($date + [18,0,0] <= [Today()])
                { print "Ok, you are over 18.\n"; }
            else
                { print "Sorry, you are under 18!\n"; }
       For more examples, see the "examples" subdirectory in this
       distribution, and their descriptions in the file "EXAMPLES.txt".
SEE ALSO
       Date::Calc(3), Date::Calc::Util(3), Date::Calendar(3),
       Date::Calendar::Year(3), Date::Calendar::Profiles(3).
VERSION
       This man page documents "Date::Calc::Object" version 6.3.
AUTHOR
         Steffen Beyer
         mailto:STBEY AT cpan.org
         http://www.engelschall.com/u/sb/download/
COPYRIGHT
       Copyright (c) 2000 - 2009 by Steffen Beyer. All rights reserved.
LICENSE
       This package is free software; you can use, modify and redistribute it
       under the same terms as Perl itself, i.e., at your option, under the
       terms either of the "Artistic License" or the "GNU General Public
       License".
       The C library at the core of the module "Date::Calc::XS" can, at your
       discretion, also be used, modified and redistributed under the terms of
       the "GNU Library General Public License".
       Please refer to the files "Artistic.txt", "GNU_GPL.txt" and
       "GNU_LGPL.txt" in the "license" subdirectory of this distribution for
       any details!
DISCLAIMER
       This package is distributed in the hope that it will be useful, but
       WITHOUT ANY WARRANTY; without even the implied warranty of
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the "GNU General Public License" for more details.

perl v5.16.3                      2009-10-31             Date::Calc::Object(3)