Benchmark(category20-virtualisierung.html) - phpMan

Benchmark(3pm)         Perl Programmers Reference Guide         Benchmark(3pm)

NAME
       Benchmark - benchmark running times of Perl code
SYNOPSIS
           use Benchmark qw(:all) ;
           timethis ($count, "code");
           # Use Perl code in strings...
           timethese($count, {
               'Name1' => '...code1...',
               'Name2' => '...code2...',
           });
           # ... or use subroutine references.
           timethese($count, {
               'Name1' => sub { ...code1... },
               'Name2' => sub { ...code2... },
           });
           # cmpthese can be used both ways as well
           cmpthese($count, {
               'Name1' => '...code1...',
               'Name2' => '...code2...',
           });
           cmpthese($count, {
               'Name1' => sub { ...code1... },
               'Name2' => sub { ...code2... },
           });
           # ...or in two stages
           $results = timethese($count,
               {
                   'Name1' => sub { ...code1... },
                   'Name2' => sub { ...code2... },
               },
               'none'
           );
           cmpthese( $results ) ;
           $t = timeit($count, '...other code...')
           print "$count loops of other code took:",timestr($t),"\n";
           $t = countit($time, '...other code...')
           $count = $t->iters ;
           print "$count loops of other code took:",timestr($t),"\n";
           # enable hires wallclock timing if possible
           use Benchmark ':hireswallclock';
DESCRIPTION
       The Benchmark module encapsulates a number of routines to help you
       figure out how long it takes to execute some code.
       timethis - run a chunk of code several times
       timethese - run several chunks of code several times
       cmpthese - print results of timethese as a comparison chart
       timeit - run a chunk of code and see how long it goes
       countit - see how many times a chunk of code runs in a given time
   Methods
       new       Returns the current time.   Example:
                     use Benchmark;
                     $t0 = Benchmark->new;
                     # ... your code here ...
                     $t1 = Benchmark->new;
                     $td = timediff($t1, $t0);
                     print "the code took:",timestr($td),"\n";
       debug     Enables or disable debugging by setting the $Benchmark::Debug
                 flag:
                     Benchmark->debug(1);
                     $t = timeit(10, ' 5 ** $Global ');
                     Benchmark->debug(0);
       iters     Returns the number of iterations.
   Standard Exports
       The following routines will be exported into your namespace if you use
       the Benchmark module:
       timeit(COUNT, CODE)
                 Arguments: COUNT is the number of times to run the loop, and
                 CODE is the code to run.  CODE may be either a code reference
                 or a string to be eval'd; either way it will be run in the
                 caller's package.
                 Returns: a Benchmark object.
       timethis ( COUNT, CODE, [ TITLE, [ STYLE ]] )
                 Time COUNT iterations of CODE. CODE may be a string to eval
                 or a code reference; either way the CODE will run in the
                 caller's package.  Results will be printed to STDOUT as TITLE
                 followed by the times.  TITLE defaults to "timethis COUNT" if
                 none is provided. STYLE determines the format of the output,
                 as described for timestr() below.
                 The COUNT can be zero or negative: this means the minimum
                 number of CPU seconds to run.  A zero signifies the default
                 of 3 seconds.  For example to run at least for 10 seconds:
                         timethis(-10, $code)
                 or to run two pieces of code tests for at least 3 seconds:
                         timethese(0, { test1 => '...', test2 => '...'})
                 CPU seconds is, in UNIX terms, the user time plus the system
                 time of the process itself, as opposed to the real
                 (wallclock) time and the time spent by the child processes.
                 Less than 0.1 seconds is not accepted (-0.01 as the count,
                 for example, will cause a fatal runtime exception).
                 Note that the CPU seconds is the minimum time: CPU scheduling
                 and other operating system factors may complicate the attempt
                 so that a little bit more time is spent.  The benchmark
                 output will, however, also tell the number of $code
                 runs/second, which should be a more interesting number than
                 the actually spent seconds.
                 Returns a Benchmark object.
       timethese ( COUNT, CODEHASHREF, [ STYLE ] )
                 The CODEHASHREF is a reference to a hash containing names as
                 keys and either a string to eval or a code reference for each
                 value.  For each (KEY, VALUE) pair in the CODEHASHREF, this
                 routine will call
                         timethis(COUNT, VALUE, KEY, STYLE)
                 The routines are called in string comparison order of KEY.
                 The COUNT can be zero or negative, see timethis().
                 Returns a hash reference of Benchmark objects, keyed by name.
       timediff ( T1, T2 )
                 Returns the difference between two Benchmark times as a
                 Benchmark object suitable for passing to timestr().
       timestr ( TIMEDIFF, [ STYLE, [ FORMAT ] ] )
                 Returns a string that formats the times in the TIMEDIFF
                 object in the requested STYLE. TIMEDIFF is expected to be a
                 Benchmark object similar to that returned by timediff().
                 STYLE can be any of 'all', 'none', 'noc', 'nop' or 'auto'.
                 'all' shows each of the 5 times available ('wallclock' time,
                 user time, system time, user time of children, and system
                 time of children). 'noc' shows all except the two children
                 times. 'nop' shows only wallclock and the two children times.
                 'auto' (the default) will act as 'all' unless the children
                 times are both zero, in which case it acts as 'noc'.  'none'
                 prevents output.
                 FORMAT is the printf(3)-style format specifier (without the
                 leading '%') to use to print the times. It defaults to
                 '5.2f'.
   Optional Exports
       The following routines will be exported into your namespace if you
       specifically ask that they be imported:
       clearcache ( COUNT )
                 Clear the cached time for COUNT rounds of the null loop.
       clearallcache ( )
                 Clear all cached times.
       cmpthese ( COUNT, CODEHASHREF, [ STYLE ] )
       cmpthese ( RESULTSHASHREF, [ STYLE ] )
                 Optionally calls timethese(), then outputs comparison chart.
                 This:
                     cmpthese( -1, { a => "++\$i", b => "\$i *= 2" } ) ;
                 outputs a chart like:
                            Rate    b    a
                     b 2831802/s   -- -61%
                     a 7208959/s 155%   --
                 This chart is sorted from slowest to fastest, and shows the
                 percent speed difference between each pair of tests.
                 "cmpthese" can also be passed the data structure that
                 timethese() returns:
                     $results = timethese( -1, { a => "++\$i", b => "\$i *= 2" } ) ;
                     cmpthese( $results );
                 in case you want to see both sets of results.  If the first
                 argument is an unblessed hash reference, that is
                 RESULTSHASHREF; otherwise that is COUNT.
                 Returns a reference to an ARRAY of rows, each row is an ARRAY
                 of cells from the above chart, including labels. This:
                     my $rows = cmpthese( -1, { a => '++$i', b => '$i *= 2' }, "none" );
                 returns a data structure like:
                     [
                         [ '',       'Rate',   'b',    'a' ],
                         [ 'b', '2885232/s',  '--', '-59%' ],
                         [ 'a', '7099126/s', '146%',  '--' ],
                     ]
                 NOTE: This result value differs from previous versions, which
                 returned the "timethese()" result structure.  If you want
                 that, just use the two statement "timethese"..."cmpthese"
                 idiom shown above.
                 Incidentally, note the variance in the result values between
                 the two examples; this is typical of benchmarking.  If this
                 were a real benchmark, you would probably want to run a lot
                 more iterations.
       countit(TIME, CODE)
                 Arguments: TIME is the minimum length of time to run CODE
                 for, and CODE is the code to run.  CODE may be either a code
                 reference or a string to be eval'd; either way it will be run
                 in the caller's package.
                 TIME is not negative.  countit() will run the loop many times
                 to calculate the speed of CODE before running it for TIME.
                 The actual time run for will usually be greater than TIME due
                 to system clock resolution, so it's best to look at the
                 number of iterations divided by the times that you are
                 concerned with, not just the iterations.
                 Returns: a Benchmark object.
       disablecache ( )
                 Disable caching of timings for the null loop. This will force
                 Benchmark to recalculate these timings for each new piece of
                 code timed.
       enablecache ( )
                 Enable caching of timings for the null loop. The time taken
                 for COUNT rounds of the null loop will be calculated only
                 once for each different COUNT used.
       timesum ( T1, T2 )
                 Returns the sum of two Benchmark times as a Benchmark object
                 suitable for passing to timestr().
   :hireswallclock
       If the Time::HiRes module has been installed, you can specify the
       special tag ":hireswallclock" for Benchmark (if Time::HiRes is not
       available, the tag will be silently ignored).  This tag will cause the
       wallclock time to be measured in microseconds, instead of integer
       seconds.  Note though that the speed computations are still conducted
       in CPU time, not wallclock time.
NOTES
       The data is stored as a list of values from the time and times
       functions:
             ($real, $user, $system, $children_user, $children_system, $iters)
       in seconds for the whole loop (not divided by the number of rounds).
       The timing is done using time(3) and times(3).
       Code is executed in the caller's package.
       The time of the null loop (a loop with the same number of rounds but
       empty loop body) is subtracted from the time of the real loop.
       The null loop times can be cached, the key being the number of rounds.
       The caching can be controlled using calls like these:
           clearcache($key);
           clearallcache();
           disablecache();
           enablecache();
       Caching is off by default, as it can (usually slightly) decrease
       accuracy and does not usually noticeably affect runtimes.
EXAMPLES
       For example,
           use Benchmark qw( cmpthese ) ;
           $x = 3;
           cmpthese( -5, {
               a => sub{$x*$x},
               b => sub{$x**2},
           } );
       outputs something like this:
          Benchmark: running a, b, each for at least 5 CPU seconds...
                 Rate    b    a
          b 1559428/s   -- -62%
          a 4152037/s 166%   --
       while
           use Benchmark qw( timethese cmpthese ) ;
           $x = 3;
           $r = timethese( -5, {
               a => sub{$x*$x},
               b => sub{$x**2},
           } );
           cmpthese $r;
       outputs something like this:
           Benchmark: running a, b, each for at least 5 CPU seconds...
                    a: 10 wallclock secs ( 5.14 usr +  0.13 sys =  5.27 CPU) @ 3835055.60/s (n=20210743)
                    b:  5 wallclock secs ( 5.41 usr +  0.00 sys =  5.41 CPU) @ 1574944.92/s (n=8520452)
                  Rate    b    a
           b 1574945/s   -- -59%
           a 3835056/s 144%   --
INHERITANCE
       Benchmark inherits from no other class, except of course for Exporter.
CAVEATS
       Comparing eval'd strings with code references will give you inaccurate
       results: a code reference will show a slightly slower execution time
       than the equivalent eval'd string.
       The real time timing is done using time(2) and the granularity is
       therefore only one second.
       Short tests may produce negative figures because perl can appear to
       take longer to execute the empty loop than a short test; try:
           timethis(100,'1');
       The system time of the null loop might be slightly more than the system
       time of the loop with the actual code and therefore the difference
       might end up being < 0.
SEE ALSO
       Devel::NYTProf - a Perl code profiler
AUTHORS
       Jarkko Hietaniemi <jhi AT iki.fi>, Tim Bunce <Tim.Bunce AT ig.uk>
MODIFICATION HISTORY
       September 8th, 1994; by Tim Bunce.
       March 28th, 1997; by Hugo van der Sanden: added support for code
       references and the already documented 'debug' method; revamped
       documentation.
       April 04-07th, 1997: by Jarkko Hietaniemi, added the run-for-some-time
       functionality.
       September, 1999; by Barrie Slaymaker: math fixes and accuracy and
       efficiency tweaks.  Added cmpthese().  A result is now returned from
       timethese().  Exposed countit() (was runfor()).
       December, 2001; by Nicholas Clark: make timestr() recognise the style
       'none' and return an empty string. If cmpthese is calling timethese,
       make it pass the style in. (so that 'none' will suppress output). Make
       sub new dump its debugging output to STDERR, to be consistent with
       everything else.  All bugs found while writing a regression test.
       September, 2002; by Jarkko Hietaniemi: add ':hireswallclock' special
       tag.
       February, 2004; by Chia-liang Kao: make cmpthese and timestr use time
       statistics for children instead of parent when the style is 'nop'.
       November, 2007; by Christophe Grosjean: make cmpthese and timestr
       compute time consistently with style argument, default is 'all' not
       'noc' any more.

perl v5.16.3                      2013-03-04                    Benchmark(3pm)