SELECT_TUT(2) Linux Programmer's Manual SELECT_TUT(2)
NAME
select, pselect, FD_CLR, FD_ISSET, FD_SET, FD_ZERO - synchronous I/O
multiplexing
SYNOPSIS
/* According to POSIX.1-2001, POSIX.1-2008 */
#include <sys/select.h>
/* According to earlier standards */
#include <sys/time.h>
#include <sys/types.h>
#include <unistd.h>
int select(int nfds, fd_set *readfds, fd_set *writefds,
fd_set *exceptfds, struct timeval *utimeout);
void FD_CLR(int fd, fd_set *set);
int FD_ISSET(int fd, fd_set *set);
void FD_SET(int fd, fd_set *set);
void FD_ZERO(fd_set *set);
#include <sys/select.h>
int pselect(int nfds, fd_set *readfds, fd_set *writefds,
fd_set *exceptfds, const struct timespec *ntimeout,
const sigset_t *sigmask);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
pselect(): _POSIX_C_SOURCE >= 200112L
DESCRIPTION
select() (or pselect()) is used to efficiently monitor multiple file
descriptors, to see if any of them is, or becomes, "ready"; that is, to
see whether I/O becomes possible, or an "exceptional condition" has
occurred on any of the file descriptors.
Its principal arguments are three "sets" of file descriptors: readfds,
writefds, and exceptfds. Each set is declared as type fd_set, and its
contents can be manipulated with the macros FD_CLR(), FD_ISSET(),
FD_SET(), and FD_ZERO(). A newly declared set should first be cleared
using FD_ZERO(). select() modifies the contents of the sets according
to the rules described below; after calling select() you can test if a
file descriptor is still present in a set with the FD_ISSET() macro.
FD_ISSET() returns nonzero if a specified file descriptor is present in
a set and zero if it is not. FD_CLR() removes a file descriptor from a
set.
Arguments
readfds
This set is watched to see if data is available for reading from
any of its file descriptors. After select() has returned,
readfds will be cleared of all file descriptors except for those
that are immediately available for reading.
writefds
This set is watched to see if there is space to write data to
any of its file descriptors. After select() has returned,
writefds will be cleared of all file descriptors except for
those that are immediately available for writing.
exceptfds
This set is watched for "exceptional conditions". In practice,
only one such exceptional condition is common: the availability
of out-of-band (OOB) data for reading from a TCP socket. See
recv(2), send(2), and tcp(7) for more details about OOB data.
(One other less common case where select(2) indicates an excep-
tional condition occurs with pseudoterminals in packet mode; see
ioctl_tty(2).) After select() has returned, exceptfds will be
cleared of all file descriptors except for those for which an
exceptional condition has occurred.
nfds This is an integer one more than the maximum of any file
descriptor in any of the sets. In other words, while adding
file descriptors to each of the sets, you must calculate the
maximum integer value of all of them, then increment this value
by one, and then pass this as nfds.
utimeout
This is the longest time select() may wait before returning,
even if nothing interesting happened. If this value is passed
as NULL, then select() blocks indefinitely waiting for a file
descriptor to become ready. utimeout can be set to zero sec-
onds, which causes select() to return immediately, with informa-
tion about the readiness of file descriptors at the time of the
call. The structure struct timeval is defined as:
struct timeval {
time_t tv_sec; /* seconds */
long tv_usec; /* microseconds */
};
ntimeout
This argument for pselect() has the same meaning as utimeout,
but struct timespec has nanosecond precision as follows:
struct timespec {
long tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
sigmask
This argument holds a set of signals that the kernel should
unblock (i.e., remove from the signal mask of the calling
thread), while the caller is blocked inside the pselect() call
(see sigaddset(3) and sigprocmask(2)). It may be NULL, in which
case the call does not modify the signal mask on entry and exit
to the function. In this case, pselect() will then behave just
like select().
Combining signal and data events
pselect() is useful if you are waiting for a signal as well as for file
descriptor(s) to become ready for I/O. Programs that receive signals
normally use the signal handler only to raise a global flag. The
global flag will indicate that the event must be processed in the main
loop of the program. A signal will cause the select() (or pselect())
call to return with errno set to EINTR. This behavior is essential so
that signals can be processed in the main loop of the program, other-
wise select() would block indefinitely. Now, somewhere in the main
loop will be a conditional to check the global flag. So we must ask:
what if a signal arrives after the conditional, but before the select()
call? The answer is that select() would block indefinitely, even
though an event is actually pending. This race condition is solved by
the pselect() call. This call can be used to set the signal mask to a
set of signals that are to be received only within the pselect() call.
For instance, let us say that the event in question was the exit of a
child process. Before the start of the main loop, we would block
SIGCHLD using sigprocmask(2). Our pselect() call would enable SIGCHLD
by using an empty signal mask. Our program would look like:
static volatile sig_atomic_t got_SIGCHLD = 0;
static void
child_sig_handler(int sig)
{
got_SIGCHLD = 1;
}
int
main(int argc, char *argv[])
{
sigset_t sigmask, empty_mask;
struct sigaction sa;
fd_set readfds, writefds, exceptfds;
int r;
sigemptyset(&sigmask);
sigaddset(&sigmask, SIGCHLD);
if (sigprocmask(SIG_BLOCK, &sigmask, NULL) == -1) {
perror("sigprocmask");
exit(EXIT_FAILURE);
}
sa.sa_flags = 0;
sa.sa_handler = child_sig_handler;
sigemptyset(&sa.sa_mask);
if (sigaction(SIGCHLD, &sa, NULL) == -1) {
perror("sigaction");
exit(EXIT_FAILURE);
}
sigemptyset(&empty_mask);
for (;;) { /* main loop */
/* Initialize readfds, writefds, and exceptfds
before the pselect() call. (Code omitted.) */
r = pselect(nfds, &readfds, &writefds, &exceptfds,
NULL, &empty_mask);
if (r == -1 && errno != EINTR) {
/* Handle error */
}
if (got_SIGCHLD) {
got_SIGCHLD = 0;
/* Handle signalled event here; e.g., wait() for all
terminated children. (Code omitted.) */
}
/* main body of program */
}
}
Practical
So what is the point of select()? Can't I just read and write to my
file descriptors whenever I want? The point of select() is that it
watches multiple descriptors at the same time and properly puts the
process to sleep if there is no activity. UNIX programmers often find
themselves in a position where they have to handle I/O from more than
one file descriptor where the data flow may be intermittent. If you
were to merely create a sequence of read(2) and write(2) calls, you
would find that one of your calls may block waiting for data from/to a
file descriptor, while another file descriptor is unused though ready
for I/O. select() efficiently copes with this situation.
Select law
Many people who try to use select() come across behavior that is diffi-
cult to understand and produces nonportable or borderline results. For
instance, the above program is carefully written not to block at any
point, even though it does not set its file descriptors to nonblocking
mode. It is easy to introduce subtle errors that will remove the
advantage of using select(), so here is a list of essentials to watch
for when using select().
1. You should always try to use select() without a timeout. Your pro-
gram should have nothing to do if there is no data available. Code
that depends on timeouts is not usually portable and is difficult
to debug.
2. The value nfds must be properly calculated for efficiency as
explained above.
3. No file descriptor must be added to any set if you do not intend to
check its result after the select() call, and respond appropri-
ately. See next rule.
4. After select() returns, all file descriptors in all sets should be
checked to see if they are ready.
5. The functions read(2), recv(2), write(2), and send(2) do not neces-
sarily read/write the full amount of data that you have requested.
If they do read/write the full amount, it's because you have a low
traffic load and a fast stream. This is not always going to be the
case. You should cope with the case of your functions managing to
send or receive only a single byte.
6. Never read/write only in single bytes at a time unless you are
really sure that you have a small amount of data to process. It is
extremely inefficient not to read/write as much data as you can
buffer each time. The buffers in the example below are 1024 bytes
although they could easily be made larger.
7. Calls to read(2), recv(2), write(2), send(2), and select() can fail
with the error EINTR, and calls to read(2), recv(2) write(2), and
send(2) can fail with errno set to EAGAIN (EWOULDBLOCK). These
results must be properly managed (not done properly above). If
your program is not going to receive any signals, then it is
unlikely you will get EINTR. If your program does not set non-
blocking I/O, you will not get EAGAIN.
8. Never call read(2), recv(2), write(2), or send(2) with a buffer
length of zero.
9. If the functions read(2), recv(2), write(2), and send(2) fail with
errors other than those listed in 7., or one of the input functions
returns 0, indicating end of file, then you should not pass that
file descriptor to select() again. In the example below, I close
the file descriptor immediately, and then set it to -1 to prevent
it being included in a set.
10. The timeout value must be initialized with each new call to
select(), since some operating systems modify the structure. pse-
lect() however does not modify its timeout structure.
11. Since select() modifies its file descriptor sets, if the call is
being used in a loop, then the sets must be reinitialized before
each call.
Usleep emulation
On systems that do not have a usleep(3) function, you can call select()
with a finite timeout and no file descriptors as follows:
struct timeval tv;
tv.tv_sec = 0;
tv.tv_usec = 200000; /* 0.2 seconds */
select(0, NULL, NULL, NULL, &tv);
This is guaranteed to work only on UNIX systems, however.
RETURN VALUE
On success, select() returns the total number of file descriptors still
present in the file descriptor sets.
If select() timed out, then the return value will be zero. The file
descriptors set should be all empty (but may not be on some systems).
A return value of -1 indicates an error, with errno being set appropri-
ately. In the case of an error, the contents of the returned sets and
the struct timeout contents are undefined and should not be used. pse-
lect() however never modifies ntimeout.
NOTES
Generally speaking, all operating systems that support sockets also
support select(). select() can be used to solve many problems in a
portable and efficient way that naive programmers try to solve in a
more complicated manner using threads, forking, IPCs, signals, memory
sharing, and so on.
The poll(2) system call has the same functionality as select(), and is
somewhat more efficient when monitoring sparse file descriptor sets.
It is nowadays widely available, but historically was less portable
than select().
The Linux-specific epoll(7) API provides an interface that is more
efficient than select(2) and poll(2) when monitoring large numbers of
file descriptors.
EXAMPLE
Here is an example that better demonstrates the true utility of
select(). The listing below is a TCP forwarding program that forwards
from one TCP port to another.
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/time.h>
#include <sys/types.h>
#include <string.h>
#include <signal.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <errno.h>
static int forward_port;
#undef max
#define max(x,y) ((x) > (y) ? (x) : (y))
static int
listen_socket(int listen_port)
{
struct sockaddr_in addr;
int lfd;
int yes;
lfd = socket(AF_INET, SOCK_STREAM, 0);
if (lfd == -1) {
perror("socket");
return -1;
}
yes = 1;
if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR,
&yes, sizeof(yes)) == -1) {
perror("setsockopt");
close(lfd);
return -1;
}
memset(&addr, 0, sizeof(addr));
addr.sin_port = htons(listen_port);
addr.sin_family = AF_INET;
if (bind(lfd, (struct sockaddr *) &addr, sizeof(addr)) == -1) {
perror("bind");
close(lfd);
return -1;
}
printf("accepting connections on port %d\n", listen_port);
listen(lfd, 10);
return lfd;
}
static int
connect_socket(int connect_port, char *address)
{
struct sockaddr_in addr;
int cfd;
cfd = socket(AF_INET, SOCK_STREAM, 0);
if (cfd == -1) {
perror("socket");
return -1;
}
memset(&addr, 0, sizeof(addr));
addr.sin_port = htons(connect_port);
addr.sin_family = AF_INET;
if (!inet_aton(address, (struct in_addr *) &addr.sin_addr.s_addr)) {
perror("bad IP address format");
close(cfd);
return -1;
}
if (connect(cfd, (struct sockaddr *) &addr, sizeof(addr)) == -1) {
perror("connect()");
shutdown(cfd, SHUT_RDWR);
close(cfd);
return -1;
}
return cfd;
}
#define SHUT_FD1 do { \
if (fd1 >= 0) { \
shutdown(fd1, SHUT_RDWR); \
close(fd1); \
fd1 = -1; \
} \
} while (0)
#define SHUT_FD2 do { \
if (fd2 >= 0) { \
shutdown(fd2, SHUT_RDWR); \
close(fd2); \
fd2 = -1; \
} \
} while (0)
#define BUF_SIZE 1024
int
main(int argc, char *argv[])
{
int h;
int fd1 = -1, fd2 = -1;
char buf1[BUF_SIZE], buf2[BUF_SIZE];
int buf1_avail = 0, buf1_written = 0;
int buf2_avail = 0, buf2_written = 0;
if (argc != 4) {
fprintf(stderr, "Usage\n\tfwd <listen-port> "
"<forward-to-port> <forward-to-ip-address>\n");
exit(EXIT_FAILURE);
}
signal(SIGPIPE, SIG_IGN);
forward_port = atoi(argv[2]);
h = listen_socket(atoi(argv[1]));
if (h == -1)
exit(EXIT_FAILURE);
for (;;) {
int ready, nfds = 0;
ssize_t nbytes;
fd_set readfds, writefds, exceptfds;
FD_ZERO(&readfds);
FD_ZERO(&writefds);
FD_ZERO(&exceptfds);
FD_SET(h, &readfds);
nfds = max(nfds, h);
if (fd1 > 0 && buf1_avail < BUF_SIZE)
FD_SET(fd1, &readfds);
/* Note: nfds is updated below, when fd1 is added to
exceptfds. */
if (fd2 > 0 && buf2_avail < BUF_SIZE)
FD_SET(fd2, &readfds);
if (fd1 > 0 && buf2_avail - buf2_written > 0)
FD_SET(fd1, &writefds);
if (fd2 > 0 && buf1_avail - buf1_written > 0)
FD_SET(fd2, &writefds);
if (fd1 > 0) {
FD_SET(fd1, &exceptfds);
nfds = max(nfds, fd1);
}
if (fd2 > 0) {
FD_SET(fd2, &exceptfds);
nfds = max(nfds, fd2);
}
ready = select(nfds + 1, &readfds, &writefds, &exceptfds, NULL);
if (ready == -1 && errno == EINTR)
continue;
if (ready == -1) {
perror("select()");
exit(EXIT_FAILURE);
}
if (FD_ISSET(h, &readfds)) {
socklen_t addrlen;
struct sockaddr_in client_addr;
int fd;
addrlen = sizeof(client_addr);
memset(&client_addr, 0, addrlen);
fd = accept(h, (struct sockaddr *) &client_addr, &addrlen);
if (fd == -1) {
perror("accept()");
} else {
SHUT_FD1;
SHUT_FD2;
buf1_avail = buf1_written = 0;
buf2_avail = buf2_written = 0;
fd1 = fd;
fd2 = connect_socket(forward_port, argv[3]);
if (fd2 == -1)
SHUT_FD1;
else
printf("connect from %s\n",
inet_ntoa(client_addr.sin_addr));
/* Skip any events on the old, closed file descriptors. */
continue;
}
}
/* NB: read OOB data before normal reads */
if (fd1 > 0 && FD_ISSET(fd1, &exceptfds)) {
char c;
nbytes = recv(fd1, &c, 1, MSG_OOB);
if (nbytes < 1)
SHUT_FD1;
else
send(fd2, &c, 1, MSG_OOB);
}
if (fd2 > 0 && FD_ISSET(fd2, &exceptfds)) {
char c;
nbytes = recv(fd2, &c, 1, MSG_OOB);
if (nbytes < 1)
SHUT_FD2;
else
send(fd1, &c, 1, MSG_OOB);
}
if (fd1 > 0 && FD_ISSET(fd1, &readfds)) {
nbytes = read(fd1, buf1 + buf1_avail,
BUF_SIZE - buf1_avail);
if (nbytes < 1)
SHUT_FD1;
else
buf1_avail += nbytes;
}
if (fd2 > 0 && FD_ISSET(fd2, &readfds)) {
nbytes = read(fd2, buf2 + buf2_avail,
BUF_SIZE - buf2_avail);
if (nbytes < 1)
SHUT_FD2;
else
buf2_avail += nbytes;
}
if (fd1 > 0 && FD_ISSET(fd1, &writefds) && buf2_avail > 0) {
nbytes = write(fd1, buf2 + buf2_written,
buf2_avail - buf2_written);
if (nbytes < 1)
SHUT_FD1;
else
buf2_written += nbytes;
}
if (fd2 > 0 && FD_ISSET(fd2, &writefds) && buf1_avail > 0) {
nbytes = write(fd2, buf1 + buf1_written,
buf1_avail - buf1_written);
if (nbytes < 1)
SHUT_FD2;
else
buf1_written += nbytes;
}
/* Check if write data has caught read data */
if (buf1_written == buf1_avail)
buf1_written = buf1_avail = 0;
if (buf2_written == buf2_avail)
buf2_written = buf2_avail = 0;
/* One side has closed the connection, keep
writing to the other side until empty */
if (fd1 < 0 && buf1_avail - buf1_written == 0)
SHUT_FD2;
if (fd2 < 0 && buf2_avail - buf2_written == 0)
SHUT_FD1;
}
exit(EXIT_SUCCESS);
}
The above program properly forwards most kinds of TCP connections
including OOB signal data transmitted by telnet servers. It handles
the tricky problem of having data flow in both directions simultane-
ously. You might think it more efficient to use a fork(2) call and
devote a thread to each stream. This becomes more tricky than you
might suspect. Another idea is to set nonblocking I/O using fcntl(2).
This also has its problems because you end up using inefficient time-
outs.
The program does not handle more than one simultaneous connection at a
time, although it could easily be extended to do this with a linked
list of buffers--one for each connection. At the moment, new connec-
tions cause the current connection to be dropped.
SEE ALSO
accept(2), connect(2), ioctl(2), poll(2), read(2), recv(2), select(2),
send(2), sigprocmask(2), write(2), sigaddset(3), sigdelset(3), sigemp-
tyset(3), sigfillset(3), sigismember(3), epoll(7)
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 SELECT_TUT(2)
Linux-Distributionen
Huschi als Linux-Admin