pcrebuild(category25-plesk.html) - phpMan

PCREBUILD(3)               Library Functions Manual               PCREBUILD(3)

NAME
       PCRE - Perl-compatible regular expressions
PCRE BUILD-TIME OPTIONS
       This  document  describes  the  optional  features  of PCRE that can be
       selected when the library is compiled. It assumes use of the  configure
       script,  where the optional features are selected or deselected by pro-
       viding options to configure before running the make  command.  However,
       the  same  options  can be selected in both Unix-like and non-Unix-like
       environments using the GUI facility of cmake-gui if you are using CMake
       instead of configure to build PCRE.
       There  is a lot more information about building PCRE without using con-
       figure (including information about using CMake or building "by  hand")
       in  the file called NON-AUTOTOOLS-BUILD, which is part of the PCRE dis-
       tribution. You should consult this file as well as the README  file  if
       you are building in a non-Unix-like environment.
       The complete list of options for configure (which includes the standard
       ones such as the  selection  of  the  installation  directory)  can  be
       obtained by running
         ./configure --help
       The  following  sections  include  descriptions  of options whose names
       begin with --enable or --disable. These settings specify changes to the
       defaults  for  the configure command. Because of the way that configure
       works, --enable and --disable always come in pairs, so  the  complemen-
       tary  option always exists as well, but as it specifies the default, it
       is not described.
BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES
       By default, a library called libpcre  is  built,  containing  functions
       that  take  string  arguments  contained in vectors of bytes, either as
       single-byte characters, or interpreted as UTF-8 strings. You  can  also
       build  a  separate library, called libpcre16, in which strings are con-
       tained in vectors of 16-bit data units and interpreted either  as  sin-
       gle-unit characters or UTF-16 strings, by adding
         --enable-pcre16
       to the configure command. You can also build a separate library, called
       libpcre32, in which strings are contained in  vectors  of  32-bit  data
       units  and  interpreted  either  as  single-unit  characters  or UTF-32
       strings, by adding
         --enable-pcre32
       to the configure command. If you do not want the 8-bit library, add
         --disable-pcre8
       as well. At least one of the three libraries must be built.  Note  that
       the  C++  and  POSIX  wrappers are for the 8-bit library only, and that
       pcregrep is an 8-bit program. None of these are  built  if  you  select
       only the 16-bit or 32-bit libraries.
BUILDING SHARED AND STATIC LIBRARIES
       The  PCRE building process uses libtool to build both shared and static
       Unix libraries by default. You can suppress one of these by adding  one
       of
         --disable-shared
         --disable-static
       to the configure command, as required.
C++ SUPPORT
       By  default,  if the 8-bit library is being built, the configure script
       will search for a C++ compiler and C++ header files. If it finds  them,
       it  automatically  builds  the C++ wrapper library (which supports only
       8-bit strings). You can disable this by adding
         --disable-cpp
       to the configure command.
UTF-8, UTF-16 AND UTF-32 SUPPORT
       To build PCRE with support for UTF Unicode character strings, add
         --enable-utf
       to the configure command. This setting applies to all three  libraries,
       adding  support  for  UTF-8 to the 8-bit library, support for UTF-16 to
       the 16-bit library, and  support  for  UTF-32  to  the  to  the  32-bit
       library.  There  are no separate options for enabling UTF-8, UTF-16 and
       UTF-32 independently because that would allow ridiculous settings  such
       as  requesting UTF-16 support while building only the 8-bit library. It
       is not possible to build one library with UTF support and another with-
       out  in the same configuration. (For backwards compatibility, --enable-
       utf8 is a synonym of --enable-utf.)
       Of itself, this setting does not make  PCRE  treat  strings  as  UTF-8,
       UTF-16  or UTF-32. As well as compiling PCRE with this option, you also
       have have to set the PCRE_UTF8, PCRE_UTF16  or  PCRE_UTF32  option  (as
       appropriate) when you call one of the pattern compiling functions.
       If  you  set --enable-utf when compiling in an EBCDIC environment, PCRE
       expects its input to be either ASCII or UTF-8 (depending  on  the  run-
       time option). It is not possible to support both EBCDIC and UTF-8 codes
       in the same version of  the  library.  Consequently,  --enable-utf  and
       --enable-ebcdic are mutually exclusive.
UNICODE CHARACTER PROPERTY SUPPORT
       UTF  support allows the libraries to process character codepoints up to
       0x10ffff in the strings that they handle. On its own, however, it  does
       not provide any facilities for accessing the properties of such charac-
       ters. If you want to be able to use the pattern escapes \P, \p, and \X,
       which refer to Unicode character properties, you must add
         --enable-unicode-properties
       to  the  configure  command. This implies UTF support, even if you have
       not explicitly requested it.
       Including Unicode property support adds around 30K  of  tables  to  the
       PCRE  library.  Only  the general category properties such as Lu and Nd
       are supported. Details are given in the pcrepattern documentation.
JUST-IN-TIME COMPILER SUPPORT
       Just-in-time compiler support is included in the build by specifying
         --enable-jit
       This support is available only for certain hardware  architectures.  If
       this  option  is  set  for  an unsupported architecture, a compile time
       error occurs.  See the pcrejit documentation for a  discussion  of  JIT
       usage. When JIT support is enabled, pcregrep automatically makes use of
       it, unless you add
         --disable-pcregrep-jit
       to the "configure" command.
CODE VALUE OF NEWLINE
       By default, PCRE interprets the linefeed (LF) character  as  indicating
       the  end  of  a line. This is the normal newline character on Unix-like
       systems. You can compile PCRE to use carriage return (CR)  instead,  by
       adding
         --enable-newline-is-cr
       to  the  configure  command.  There  is  also  a --enable-newline-is-lf
       option, which explicitly specifies linefeed as the newline character.
       Alternatively, you can specify that line endings are to be indicated by
       the two character sequence CRLF. If you want this, add
         --enable-newline-is-crlf
       to the configure command. There is a fourth option, specified by
         --enable-newline-is-anycrlf
       which  causes  PCRE  to recognize any of the three sequences CR, LF, or
       CRLF as indicating a line ending. Finally, a fifth option, specified by
         --enable-newline-is-any
       causes PCRE to recognize any Unicode newline sequence.
       Whatever line ending convention is selected when PCRE is built  can  be
       overridden  when  the library functions are called. At build time it is
       conventional to use the standard for your operating system.
WHAT \R MATCHES
       By default, the sequence \R in a pattern matches  any  Unicode  newline
       sequence,  whatever  has  been selected as the line ending sequence. If
       you specify
         --enable-bsr-anycrlf
       the default is changed so that \R matches only CR, LF, or  CRLF.  What-
       ever  is selected when PCRE is built can be overridden when the library
       functions are called.
POSIX MALLOC USAGE
       When the 8-bit library is called through the POSIX interface  (see  the
       pcreposix  documentation),  additional  working storage is required for
       holding the pointers to capturing  substrings,  because  PCRE  requires
       three integers per substring, whereas the POSIX interface provides only
       two. If the number of expected substrings is small, the  wrapper  func-
       tion  uses  space  on the stack, because this is faster than using mal-
       loc() for each call. The default threshold above which the stack is  no
       longer used is 10; it can be changed by adding a setting such as
         --with-posix-malloc-threshold=20
       to the configure command.
HANDLING VERY LARGE PATTERNS
       Within  a  compiled  pattern,  offset values are used to point from one
       part to another (for example, from an opening parenthesis to an  alter-
       nation  metacharacter).  By default, in the 8-bit and 16-bit libraries,
       two-byte values are used for these offsets, leading to a  maximum  size
       for  a compiled pattern of around 64K. This is sufficient to handle all
       but the most gigantic patterns.  Nevertheless, some people do  want  to
       process  truly  enormous patterns, so it is possible to compile PCRE to
       use three-byte or four-byte offsets by adding a setting such as
         --with-link-size=3
       to the configure command. The value given must be 2, 3, or 4.  For  the
       16-bit  library,  a  value of 3 is rounded up to 4. In these libraries,
       using longer offsets slows down the operation of PCRE because it has to
       load  additional  data  when  handling them. For the 32-bit library the
       value is always 4 and cannot be overridden; the value  of  --with-link-
       size is ignored.
AVOIDING EXCESSIVE STACK USAGE
       When matching with the pcre_exec() function, PCRE implements backtrack-
       ing by making recursive calls to an internal function  called  match().
       In  environments  where  the size of the stack is limited, this can se-
       verely limit PCRE's operation. (The Unix environment does  not  usually
       suffer from this problem, but it may sometimes be necessary to increase
       the maximum stack size.  There is a discussion in the  pcrestack  docu-
       mentation.)  An alternative approach to recursion that uses memory from
       the heap to remember data, instead of using recursive  function  calls,
       has  been  implemented to work round the problem of limited stack size.
       If you want to build a version of PCRE that works this way, add
         --disable-stack-for-recursion
       to the configure command. With this configuration, PCRE  will  use  the
       pcre_stack_malloc  and pcre_stack_free variables to call memory manage-
       ment functions. By default these point to malloc() and free(), but  you
       can replace the pointers so that your own functions are used instead.
       Separate  functions  are  provided  rather  than  using pcre_malloc and
       pcre_free because the  usage  is  very  predictable:  the  block  sizes
       requested  are  always  the  same,  and  the blocks are always freed in
       reverse order. A calling program might be able to  implement  optimized
       functions  that  perform  better  than  malloc()  and free(). PCRE runs
       noticeably more slowly when built in this way. This option affects only
       the pcre_exec() function; it is not relevant for pcre_dfa_exec().
LIMITING PCRE RESOURCE USAGE
       Internally,  PCRE has a function called match(), which it calls repeat-
       edly  (sometimes  recursively)  when  matching  a  pattern   with   the
       pcre_exec()  function.  By controlling the maximum number of times this
       function may be called during a single matching operation, a limit  can
       be  placed  on  the resources used by a single call to pcre_exec(). The
       limit can be changed at run time, as described in the pcreapi  documen-
       tation.  The default is 10 million, but this can be changed by adding a
       setting such as
         --with-match-limit=500000
       to  the  configure  command.  This  setting  has  no  effect   on   the
       pcre_dfa_exec() matching function.
       In  some  environments  it is desirable to limit the depth of recursive
       calls of match() more strictly than the total number of calls, in order
       to  restrict  the maximum amount of stack (or heap, if --disable-stack-
       for-recursion is specified) that is used. A second limit controls this;
       it  defaults  to  the  value  that is set for --with-match-limit, which
       imposes no additional constraints. However, you can set a  lower  limit
       by adding, for example,
         --with-match-limit-recursion=10000
       to  the  configure  command.  This  value can also be overridden at run
       time.
CREATING CHARACTER TABLES AT BUILD TIME
       PCRE uses fixed tables for processing characters whose code values  are
       less  than 256. By default, PCRE is built with a set of tables that are
       distributed in the file pcre_chartables.c.dist. These  tables  are  for
       ASCII codes only. If you add
         --enable-rebuild-chartables
       to  the  configure  command, the distributed tables are no longer used.
       Instead, a program called dftables is compiled and  run.  This  outputs
       the source for new set of tables, created in the default locale of your
       C run-time system. (This method of replacing the tables does  not  work
       if  you are cross compiling, because dftables is run on the local host.
       If you need to create alternative tables when cross compiling, you will
       have to do so "by hand".)
USING EBCDIC CODE
       PCRE  assumes  by  default that it will run in an environment where the
       character code is ASCII (or Unicode, which is  a  superset  of  ASCII).
       This  is  the  case for most computer operating systems. PCRE can, how-
       ever, be compiled to run in an EBCDIC environment by adding
         --enable-ebcdic
       to the configure command. This setting implies --enable-rebuild-charta-
       bles.  You  should  only  use  it if you know that you are in an EBCDIC
       environment (for example,  an  IBM  mainframe  operating  system).  The
       --enable-ebcdic option is incompatible with --enable-utf.
       The EBCDIC character that corresponds to an ASCII LF is assumed to have
       the value 0x15 by default. However, in some EBCDIC  environments,  0x25
       is used. In such an environment you should use
         --enable-ebcdic-nl25
       as well as, or instead of, --enable-ebcdic. The EBCDIC character for CR
       has the same value as in ASCII, namely, 0x0d.  Whichever  of  0x15  and
       0x25 is not chosen as LF is made to correspond to the Unicode NEL char-
       acter (which, in Unicode, is 0x85).
       The options that select newline behaviour, such as --enable-newline-is-
       cr, and equivalent run-time options, refer to these character values in
       an EBCDIC environment.
PCREGREP OPTIONS FOR COMPRESSED FILE SUPPORT
       By default, pcregrep reads all files as plain text. You can build it so
       that it recognizes files whose names end in .gz or .bz2, and reads them
       with libz or libbz2, respectively, by adding one or both of
         --enable-pcregrep-libz
         --enable-pcregrep-libbz2
       to the configure command. These options naturally require that the rel-
       evant  libraries  are installed on your system. Configuration will fail
       if they are not.
PCREGREP BUFFER SIZE
       pcregrep uses an internal buffer to hold a "window" on the file  it  is
       scanning, in order to be able to output "before" and "after" lines when
       it finds a match. The size of the buffer is controlled by  a  parameter
       whose default value is 20K. The buffer itself is three times this size,
       but because of the way it is used for holding "before" lines, the long-
       est  line  that  is guaranteed to be processable is the parameter size.
       You can change the default parameter value by adding, for example,
         --with-pcregrep-bufsize=50K
       to the configure command. The caller of pcregrep can, however, override
       this value by specifying a run-time option.
PCRETEST OPTION FOR LIBREADLINE SUPPORT
       If you add
         --enable-pcretest-libreadline
       to  the  configure  command,  pcretest  is  linked with the libreadline
       library, and when its input is from a terminal, it reads it  using  the
       readline() function. This provides line-editing and history facilities.
       Note that libreadline is GPL-licensed, so if you distribute a binary of
       pcretest linked in this way, there may be licensing issues.
       Setting  this  option  causes  the -lreadline option to be added to the
       pcretest build. In many operating environments with  a  sytem-installed
       libreadline this is sufficient. However, in some environments (e.g.  if
       an unmodified distribution version of readline is in use),  some  extra
       configuration  may  be necessary. The INSTALL file for libreadline says
       this:
         "Readline uses the termcap functions, but does not link with the
         termcap or curses library itself, allowing applications which link
         with readline the to choose an appropriate library."
       If your environment has not been set up so that an appropriate  library
       is automatically included, you may need to add something like
         LIBS="-ncurses"
       immediately before the configure command.
DEBUGGING WITH VALGRIND SUPPORT
       By adding the
         --enable-valgrind
       option  to to the configure command, PCRE will use valgrind annotations
       to mark certain memory regions as  unaddressable.  This  allows  it  to
       detect invalid memory accesses, and is mostly useful for debugging PCRE
       itself.
CODE COVERAGE REPORTING
       If your C compiler is gcc, you can build a version  of  PCRE  that  can
       generate a code coverage report for its test suite. To enable this, you
       must install lcov version 1.6 or above. Then specify
         --enable-coverage
       to the configure command and build PCRE in the usual way.
       Note that using ccache (a caching C compiler) is incompatible with code
       coverage  reporting. If you have configured ccache to run automatically
       on your system, you must set the environment variable
         CCACHE_DISABLE=1
       before running make to build PCRE, so that ccache is not used.
       When --enable-coverage is used,  the  following  addition  targets  are
       added to the Makefile:
         make coverage
       This  creates  a  fresh  coverage report for the PCRE test suite. It is
       equivalent to running "make coverage-reset", "make  coverage-baseline",
       "make check", and then "make coverage-report".
         make coverage-reset
       This zeroes the coverage counters, but does nothing else.
         make coverage-baseline
       This captures baseline coverage information.
         make coverage-report
       This creates the coverage report.
         make coverage-clean-report
       This  removes the generated coverage report without cleaning the cover-
       age data itself.
         make coverage-clean-data
       This removes the captured coverage data without removing  the  coverage
       files created at compile time (*.gcno).
         make coverage-clean
       This  cleans all coverage data including the generated coverage report.
       For more information about code coverage, see the gcov and  lcov  docu-
       mentation.
SEE ALSO
       pcreapi(3), pcre16, pcre32, pcre_config(3).
AUTHOR
       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.
REVISION
       Last updated: 30 October 2012
       Copyright (c) 1997-2012 University of Cambridge.

PCRE 8.32                       30 October 2012                   PCREBUILD(3)