NANORC(5) File Formats Manual NANORC(5)
NAME
nanorc - GNU nano's rcfile
DESCRIPTION
This manual page briefly documents GNU nano's rcfile.
nano is a small, free and friendly editor which aims to replace Pico,
the default editor included in the non-free Pine package. Rather than
just copying Pico's look and feel, nano also implements some missing
(or disabled by default) features in Pico, such as "search and replace"
and "go to line and column number".
The nanorc file contains the default settings for nano. It should not
be in DOS or Mac format. During startup, nano will first read its sys-
tem-wide settings from SYSCONFDIR/nanorc, and then user-specific set-
tings from ~/.nanorc.
OPTIONS
The configuration file accepts a series of set and unset commands,
which can be used to configure nano on startup without using the com-
mand line options. Additionally, the syntax, color, and icolor key-
words are used to define syntax highlighting rules for different text
patterns. nano will read one command per line.
Options in nanorc files take precedence over nano's defaults, and com-
mand line options override nanorc settings. Also, options are unset by
default, except for those that take arguments.
Quotes inside string parameters don't have to be escaped with back-
slashes. The last double quote in the string will be treated as its
end. For example, for the brackets option, ""')>]}" will match ", ',
), >, ], and }.
The supported commands and arguments are:
set/unset allow_insecure_backup
When backing up files, allow the backup to succeed even if its per-
missions can't be (re)set due to special OS considerations. You
should NOT enable this option unless you are sure you need it.
set/unset autoindent
Use auto-indentation.
set/unset backup
Create backup files in filename~.
set backupdir directory
Set the directory where nano puts unique backup files if file back-
ups are enabled.
set/unset backwards
Do backwards searches by default.
set/unset boldtext
Use bold text instead of reverse video text.
set brackets string
Set the characters treated as closing brackets when justifying para-
graphs. They cannot contain blank characters. Only closing punctu-
ation, optionally followed by closing brackets, can end sentences.
The default value is ""')>]}".
set/unset casesensitive
Do case sensitive searches by default.
set/unset const
Constantly display the cursor position in the status bar.
set/unset cut
Use cut to end of line by default.
set fill n
Wrap lines at column number n. If n is 0 or less, the maximum line
length will be the screen width less n columns. The default value
is -8.
set/unset historylog
Enable ~/.nano_history for saving and reading search/replace
strings.
set matchbrackets string
Set the opening and closing brackets that can be found by bracket
searches. They cannot contain blank characters. The former set
must come before the latter set, and both must be in the same order.
The default value is "(<[{)>]}".
set/unset morespace
Use the blank line below the titlebar as extra editing space.
set/unset mouse
Enable mouse support, if available for your system. When enabled,
mouse clicks can be used to place the cursor, set the mark (with a
double click), and execute shortcuts. The mouse will work in the X
Window System, and on the console when gpm is running.
set/unset multibuffer
Allow inserting files into their own buffers.
set/unset noconvert
Don't convert files from DOS/Mac format.
set/unset nofollow
Don't follow symlinks when writing files.
set/unset nohelp
Don't display the help lists at the bottom of the screen.
set/unset nonewlines
Don't add newlines to the ends of files.
set/unset nowrap
Don't wrap text at all.
set operatingdir directory
nano will only read and write files inside directory and its subdi-
rectories. Also, the current directory is changed to here, so files
are inserted from this directory. By default, the operating direc-
tory feature is turned off.
set/unset preserve
Preserve the XON and XOFF keys (^Q and ^S).
set punct string
Set the characters treated as closing punctuation when justifying
paragraphs. They cannot contain blank characters. Only closing
punctuation, optionally followed by closing brackets, can end sen-
tences. The default value is "!.?".
set/unset quiet
nano will not report errors in the nanorc file and ask them to be
acknowledged by pressing enter at startup. If this is used it
should be placed at the top of the file to be fully effective.
set/unset quickblank
Do quick statusbar blanking. Statusbar messages will disappear
after 1 keystroke instead of 25.
set quotestr string
The email-quote string, used to justify email-quoted paragraphs.
This is an extended regular expression if your system supports them,
otherwise a literal string. The default value is
"^([ \t]*[#:>\|}])+" if you have extended regular expression sup-
port, or "> " otherwise. Note that '\t' stands for a literal Tab
character.
set/unset rebinddelete
Interpret the Delete key differently so that both Backspace and
Delete work properly. You should only need to use this option if
Backspace acts like Delete on your system.
set/unset rebindkeypad
Interpret the numeric keypad keys so that they all work properly.
You should only need to use this option if they don't, as mouse sup-
port won't work properly with this option enabled.
set/unset regexp
Do extended regular expression searches by default.
set/unset poslog
Save the cursor position of files between editing sessions.
set/unset smarthome
Make the Home key smarter. When Home is pressed anywhere but at the
very beginning of non-whitespace characters on a line, the cursor
will jump to that beginning (either forwards or backwards). If the
cursor is already at that position, it will jump to the true begin-
ning of the line.
set/unset smooth
Use smooth scrolling by default.
set/unset softwrap
Enable soft line wrapping for easier viewing of very long lones.
set speller spellprog
Use spelling checker spellprog instead of the built-in one, which
calls spell.
set/unset suspend
Allow nano to be suspended.
set tabsize n
Use a tab size of n columns. The value of n must be greater than 0.
The default value is 8.
set/unset tabstospaces
Convert typed tabs to spaces.
set/unset tempfile
Save automatically on exit, don't prompt.
set/unset undo
Enable experimental generic-purpose undo code.
set/unset view
Disallow file modification.
set/unset softwrap
Enable soft line wrapping for easier viewing of very long lones.
set whitespace string
Set the two characters used to display the first characters of tabs
and spaces. They must be single-column characters.
set/unset wordbounds
Detect word boundaries more accurately by treating punctuation char-
acters as parts of words.
syntax str ["fileregex" ... ]
Defines a syntax named str which can be activated via the -Y/--syn-
tax command line option, or will be automatically activated if the
current filename matches the extended regular expression fileregex.
All following color and icolor statements will apply to syntax until
a new syntax is defined.
The none syntax is reserved; specifying it on the command line is
the same as not having a syntax at all. The default syntax is spe-
cial: it takes no fileregex, and applies to files that don't match
any other syntax's fileregex.
magic ["regex" ... ]
For the currently defined syntax, add one or more regexes which will
be compared against the magic database when attempting to determine
which highlighting rules to use for a given file. This functionality
only works when libmagic is installed on the system and will be
silently ignored otherwise.
color fgcolor,bgcolor regex ...
For the currently defined syntax, display all expressions matching
the extended regular expression regex with foreground color fgcolor
and background color bgcolor, at least one of which must be speci-
fied. Legal colors for foreground and background color are: white,
black, red, blue, green, yellow, magenta, and cyan. You may use the
prefix "bright" to force a stronger color highlight for the fore-
ground. If your terminal supports transparency, not specifying a
bgcolor tells nano to attempt to use a transparent background.
icolor fgcolor,bgcolor regex ...
Same as above, except that the expression matching is case insensi-
tive.
color fgcolor,bgcolor start="sr" end="er"
Display expressions which start with the extended regular expression
sr and end with the extended regular expression er with foreground
color fgcolor and background color bgcolor, at least one of which
must be specified. This allows syntax highlighting to span multiple
lines. Note that all subsequent instances of sr after an initial sr
is found will be highlighted until the first instance of er.
icolor fgcolor,bgcolor start="sr" end="er"
Same as above, except that the expression matching is case insensi-
tive.
include syntaxfile
Read in self-contained color syntaxes from syntaxfile. Note that
syntaxfile can only contain syntax, color, and icolor commands.
KEY BINDINGS
Key bindings may be reassigned via the following commands:
bind key function menu
Rebinds the key key to a new function named function in the con-
text of menu menu. The format of key should be one of:
^ followed by an alpha character or the word "Space". Example: ^C
M- followed by a printable character or the word "Space". Example:
M-C
F followed by a numeric value from 1 to 16. Example: F10
Valid function names to be bound include:
help
Invoke the help menu.
cancel
Cancel the current command.
exit
Exit from the program.
writeout
Write the current buffer to disk.
justify
Justify the current text.
insert
Insert a file into the current buffer (or into a new buffer when
multibuffer is enabled).
whereis
Search for text in the current buffer.
searchagain
Repeat the last search command.
up Move up in the editor or browser.
down
Move down in the editor or browser.
left
Move left in the editor or browser.
right
Move right in the editor or browser.
cut
Cut the current line of text and store it.
uncut
Copy the currently stored text into the current buffer position.
curpos
Show the current line, column, word positions in the file.
firstline
Move to the first line of the file.
lastline
Move to the last line of the file.
gotoline
Move to a specific line (and column if specified).
replace
Interactively replace text within the current buffer.
mark
Begin selecting text for cutting or pasting at the current position.
copytext
Copy the currently marked text without deleting it.
indent
Indent the currently marked text (shift to the right).
unindent
Un-indent the currently marked text (shift to the left).
nextword
Move the cursor to the beginning of the next word.
prevword
Move the cursor to the beginning of the previous word.
home
Move the cursor to the beginning of the current line.
end
Move the cursor to the end of the current line.
beginpara
Move the cursor to the beginning of the current paragraph.
endpara
Move the cursor to the end of the current paragraph.
findbracket
Move the cursor to the matching bracket (brace, parenthesis, etc.)
of the one under the cursor.
scrollup
Scroll up one line of text from the current position.
scrolldown
Scroll down one line of text from the current position.
prevbuf
Switch to editing/viewing the previous buffer when using multibuffer
mode.
nextbuf
Switch to editing/viewing the next buffer when using multibuffer
mode.
verbatim
Insert the next character verbatim into the file.
tab
Insert a tab at the current cursor location.
enter
Insert a new line below the current one.
delete
Delete the character under the cursor.
fulljustify
Justify the entire current file.
wordcount
Count the number of words in the current buffer.
refresh
Refresh the screen.
undo
Undo the text action peformed (add text, delete text, etc).
redo
Redo the last undone action (i.e., undo an undo).
suspend
Suspend the editor (if the suspend function is enabled, see the
"suspendenable" entry below).
casesens
Toggle case sensitivity in searching (search/replace menus only).
regexp
Toggle whether searching/replacing is based on literal strings or
regular expressions.
prevhistory
Show the previous history entry in the prompt menus (e.g. search).
nexthistory
Show the next history entry in the prompt menus (e.g. search).
dontreplace
Switch back to searching instead of replacing.
gototext
Search for files matching a string in the file browser (reading or
writing files).
dosformat
When writing a file, switch to writing a DOS format (CR/LF).
macformat
When writing a file, switch to writing a Mac format.
append
When writing a file, append to the end instead of overwriting.
prepend
When writing a file, 'prepend' (write at the beginning) instead of
overwriting.
backup
When writing a file, create a backup of the current file.
firstfile
Move to the first file when using the file browser (reading or writ-
ing files).
lastfile
Move to the last file when using the file browser (reading or writ-
ing files).
nohelp
Toggle showing/hiding the two-line list of key bindings at the bot-
tom of the screen.
constupdate
Constantly display the current line, column, word positions.
morespace
Toggle showing/hiding the blank line which 'separates' the 'title'
from the file text.
smoothscroll
Toggle smooth scrolling when moving via the arrow keys.
whitespacedisplay
Toggle whether whitespace is shown.
smarthome
Toggle whether the smart home key function is enabled.
autoindent
Toggle whether new lines will contain the same amount of whitespace
as the line above.
cuttoend
Toggle whether cutting text will cut the whole line or just from the
current cursor position to the end of the line.
nowrap
Toggle whether long lines will be wrapped to the next line.
suspendenable
Toggle whether the suspend sequence (normally ^Z) will suspend the
editor window.
Valid menu sections are:
main
The main editor window where text is entered.
search
The search menu (AKA whereis).
replace
The 'search to replace' menu.
replacewith
The 'replace with' menu, which comes up after 'search to replace'.
gotoline
The 'goto line (and column)' menu.
writeout
The 'write file' menu.
insert
The 'insert file' menu.
extcmd
The menu for inserting output from an external comman, reached from
the insert menu.
help
The help menu.
spell
The interactive spell checker Yes/no menu.
browser
The file browser for inserting or writing a file.
whereisfile
The 'search for a file' menu in the file browser.
gotodir
The 'go to directory' menu.
all
A special name meaning: apply to all menus where this function
exists.
unbind key menu
Unbind the key key from the menu named menu or from all menus by
using all. Same key syntax as for binding. Rebinds the key key to
a new function named function in the context of menu menu. The for-
mat of key should be one of:
FILES
SYSCONFDIR/nanorc
System-wide configuration file
~/.nanorc
Per-user configuration file
SEE ALSO
nano(1)
/usr/share/doc/nano/examples/nanorc.sample (or equivalent on your sys-
tem)
AUTHOR
Chris Allegretta <chrisa AT asty.org>, et al (see AUTHORS and THANKS for
details). This manual page was originally written by Jordi Mallach
<jordi AT gnu.org>, for the Debian system (but may be used by others).
August 23, 2007 version 2.0.0 NANORC(5)
Linux-Distributionen
Huschi als Linux-Admin