LVRESIZE(8) System Manager's Manual LVRESIZE(8)
NAME
lvresize -- Resize a logical volume
SYNOPSIS
lvresize option_args position_args
[ option_args ]
[ position_args ]
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
-A|--autobackup y|n
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-l|--extents [+|-]Number[PERCENT]
-f|--force
-h|--help
--journal String
--lockopt String
--longhelp
-n|--nofsck
--nohints
--nolocking
--nosync
--noudevsync
--poolmetadatasize [+]Size[m|UNIT]
--profile String
-q|--quiet
--reportformat basic|json
-r|--resizefs
-L|--size [+|-]Size[m|UNIT]
-i|--stripes Number
-I|--stripesize Size[k|UNIT]
-t|--test
--type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|
vdo-pool|cache|cache-pool|writecache
-v|--verbose
--version
-y|--yes
DESCRIPTION
lvresize resizes an LV in the same way as lvextend and lvreduce. See
lvextend(8) and lvreduce(8) for more information.
In the usage section below, --size Size can be replaced with --extents
Number. See both descriptions the options section.
USAGE
Resize an LV by a specified size.
lvresize -L|--size [+|-]Size[m|UNIT] LV
[ -l|--extents [+|-]Number[PERCENT] ]
[ -r|--resizefs ]
[ --poolmetadatasize [+]Size[m|UNIT] ]
[ COMMON_OPTIONS ]
[ PV ... ]
--
Resize an LV by specified PV extents.
lvresize LV PV ...
[ -r|--resizefs ]
[ COMMON_OPTIONS ]
--
Resize a pool metadata SubLV by a specified size.
lvresize --poolmetadatasize [+]Size[m|UNIT] LV1
[ COMMON_OPTIONS ]
[ PV ... ]
LV1 types: thinpool
--
Common options for command:
[ -A|--autobackup y|n ]
[ -f|--force ]
[ -n|--nofsck ]
[ -i|--stripes Number ]
[ -I|--stripesize Size[k|UNIT] ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
]
[ --nosync ]
[ --noudevsync ]
[ --reportformat basic|json ]
[ --type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|
vdo-pool|cache|cache-pool|writecache ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to allo-
cate Physical Extents (PEs) from the VG. Each VG and LV has an
allocation policy which can be changed with vgchange/lvchange,
or overridden on the command line. normal applies common sense
rules such as not placing parallel stripes on the same PV. in-
herit applies the VG policy to an LV. contiguous requires new
PEs be placed adjacent to existing PEs. cling places new PEs on
the same PV as existing PEs in the same stripe of the LV. If
there are sufficient PEs for an allocation, but normal does not
use them, anywhere will use them even if it reduces performance,
e.g. by placing two stripes on the same PV. Optional positional
PV args on the command line can also be used to limit which PVs
the command will use for allocation. See lvm(8) for more infor-
mation about allocation.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a
change. Enabling this is strongly advised! See vgcfgbackup(8)
for more information.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) set-
tings. The String arg uses the same format as lvm.conf(5), or
may use section/field syntax. See lvm.conf(5) for more informa-
tion about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail
of messages sent to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the
command. Devices not listed will appear to be missing. This op-
tion can be repeated, or accepts a comma separated list of de-
vices. This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist
in /etc/lvm/devices/ and is managed with the lvmdevices(8) com-
mand. This overrides the lvm.conf(5) devices/devicesfile and
devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
-l|--extents [+|-]Number[PERCENT]
Specifies the new size of the LV in logical extents. The --size
and --extents options are alternate methods of specifying size.
The total number of physical extents used will be greater when
redundant data is needed for RAID levels. An alternate syntax
allows the size to be determined indirectly as a percentage of
the size of a related VG, LV, or set of PVs. The suffix %VG de-
notes the total size of the VG, the suffix %FREE the remaining
free space in the VG, and the suffix %PVS the free space in the
specified PVs. For a snapshot, the size can be expressed as a
percentage of the total size of the origin LV with the suffix
%ORIGIN (100%ORIGIN provides space for the whole origin). When
expressed as a percentage, the size defines an upper limit for
the number of logical extents in the new LV. The precise number
of logical extents in the new LV is not determined until the
command has completed. When the plus + or minus - prefix is
used, the value is not an absolute size, but is relative and
added or subtracted from the current size.
-f|--force ...
Override various checks, confirmations and protections. Use
with extreme caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This information is
in addition to information enabled by the lvm.conf log/journal
setting. command: record information about the command. out-
put: record the default command output. debug: record full com-
mand debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvm-
lockd(8) for more information.
--longhelp
Display long help text.
-n|--nofsck
Do not perform fsck before resizing filesystem when filesystem
requires it. You may need to use --force to proceed with this
option.
--nohints
Do not use the hints file to locate devices for PVs. A command
may read more devices to find PVs when hints are not used. The
command will still perform standard hint file invalidation where
appropriate.
--nolocking
Disable locking.
--nosync
Causes the creation of mirror, raid1, raid4, raid5 and raid10 to
skip the initial synchronization. In case of mirror, raid1 and
raid10, any data written afterwards will be mirrored, but the
original contents will not be copied. In case of raid4 and
raid5, no parity blocks will be written, though any data written
afterwards will cause parity blocks to be stored. This is use-
ful for skipping a potentially long and resource intensive ini-
tial sync of an empty mirror/raid1/raid4/raid5 and raid10 LV.
This option is not valid for raid6, because raid6 relies on
proper parity (P and Q Syndromes) being created during initial
synchronization in order to reconstruct proper user date in case
of device failures. raid0 and raid0_meta do not provide any da-
ta copies or parity support and thus do not support initial syn-
chronization.
--noudevsync
Disables udev synchronisation. The process will not wait for no-
tification from udev. It will continue irrespective of any pos-
sible udev processing in the background. Only use this if udev
is not running or has rules that ignore the devices LVM creates.
--poolmetadatasize [+]Size[m|UNIT]
Specifies the new size of the pool metadata LV. The plus prefix
+ can be used, in which case the value is added to the current
size.
--profile String
An alias for --commandprofile or --metadataprofile, depending on
the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --ver-
bose. Repeat once to also suppress any prompts with answer
'no'.
--reportformat basic|json
Overrides current output format for reports which is defined
globally by the report/output_format setting in lvm.conf(5).
basic is the original format with columns and rows. If there is
more than one report per command, each report is prefixed with
the report name for identification. json produces report output
in JSON format. See lvmreport(7) for more information.
-r|--resizefs
Resize underlying filesystem together with the LV using
fsadm(8).
-L|--size [+|-]Size[m|UNIT]
Specifies the new size of the LV. The --size and --extents op-
tions are alternate methods of specifying size. The total num-
ber of physical extents used will be greater when redundant data
is needed for RAID levels. When the plus + or minus - prefix is
used, the value is not an absolute size, but is relative and
added or subtracted from the current size.
-i|--stripes Number
Specifies the number of stripes in a striped LV. This is the
number of PVs (devices) that a striped LV is spread across. Data
that appears sequential in the LV is spread across multiple de-
vices in units of the stripe size (see --stripesize). This does
not change existing allocated space, but only applies to space
being allocated by the command. When creating a RAID 4/5/6 LV,
this number does not include the extra devices that are required
for parity. The largest number depends on the RAID type (raid0:
64, raid10: 32, raid4/5: 63, raid6: 62), and when unspecified,
the default depends on the RAID type (raid0: 2, raid10: 2,
raid4/5: 3, raid6: 5.) To stripe a new raid LV across all PVs
by default, see lvm.conf(5) allocation/raid_stripe_all_devices.
-I|--stripesize Size[k|UNIT]
The amount of data that is written to one device before moving
to the next in a striped LV.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to un-
usual error messages in multi-stage operations if a tool relies
on reading back metadata it believes has changed but hasn't.
--type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|vdo-pool|
cache|cache-pool|writecache
The LV type, also known as "segment type" or "segtype". See us-
age descriptions for the specific ways to use these types. For
more information about redundancy and performance (raid<N>, mir-
ror, striped, linear) see lvmraid(7). For thin provisioning
(thin, thin-pool) see lvmthin(7). For performance caching
(cache, cache-pool) see lvmcache(7). For copy-on-write snap-
shots (snapshot) see usage definitions. For VDO (vdo) see lvmv-
do(7). Several commands omit an explicit type option because
the type is inferred from other options or shortcuts (e.g.
--stripes, --mirrors, --snapshot, --virtualsize, --thin,
--cache, --vdo). Use inferred types with care because it can
lead to unexpected results.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the de-
tail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
VARIABLES
LV Logical Volume name. See lvm(8) for valid names. An LV posi-
tional arg generally includes the VG name and LV name, e.g.
VG/LV. LV1 indicates the LV must have a specific type, where
the accepted LV types are listed. (raid represents raid<N>
type).
PV Physical Volume name, a device path under /dev. For commands
managing physical extents, a PV positional arg generally accepts
a suffix indicating a range (or multiple ranges) of physical ex-
tents (PEs). When the first PE is omitted, it defaults to the
start of the device, and when the last PE is omitted it defaults
to end. Start and end range (inclusive): PV[:PE-PE]... Start
and length range (counting from 0): PV[:PE+PE]...
String See the option description for information about the string con-
tent.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of capi-
talization, e.g. 'k' and 'K' both refer to 1024. The default
input unit is specified by letter, followed by |UNIT. UNIT rep-
resents other possible input units: b|B is bytes, s|S is sectors
of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB,
p|P is PiB, e|E is EiB. (This should not be confused with the
output control --units, where capital letters mean multiple of
1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG
parameter.
EXAMPLES
Extend an LV by 16MB using specific physical extents.
lvresize -L+16M vg1/lv1 /dev/sda:0-1 /dev/sdb:0-1
Resize an LV to use 50% of the size volume group.
lvresize -l50%VG vg1/lv1
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), lvm2-activation-generator(8),
blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)
Red Hat, Inc. LVM TOOLS 2.03.14(2)-RHEL8 (2021-10-20) LVRESIZE(8)
Linux-Distributionen
Huschi als Linux-Admin