GITATTRIBUTES(5) Git Manual GITATTRIBUTES(5)
NAME
gitattributes - defining attributes per path
SYNOPSIS
$GIT_DIR/info/attributes, .gitattributes
DESCRIPTION
A gitattributes file is a simple text file that gives attributes to
pathnames.
Each line in gitattributes file is of form:
pattern attr1 attr2 ...
That is, a pattern followed by an attributes list, separated by
whitespaces. When the pattern matches the path in question, the
attributes listed on the line are given to the path.
Each attribute can be in one of these states for a given path:
Set
The path has the attribute with special value "true"; this is
specified by listing only the name of the attribute in the
attribute list.
Unset
The path has the attribute with special value "false"; this is
specified by listing the name of the attribute prefixed with a dash
- in the attribute list.
Set to a value
The path has the attribute with specified string value; this is
specified by listing the name of the attribute followed by an equal
sign = and its value in the attribute list.
Unspecified
No pattern matches the path, and nothing says if the path has or
does not have the attribute, the attribute for the path is said to
be Unspecified.
When more than one pattern matches the path, a later line overrides an
earlier line. This overriding is done per attribute. The rules how the
pattern matches paths are the same as in .gitignore files; see
gitignore(5). Unlike .gitignore, negative patterns are forbidden.
When deciding what attributes are assigned to a path, Git consults
$GIT_DIR/info/attributes file (which has the highest precedence),
.gitattributes file in the same directory as the path in question, and
its parent directories up to the toplevel of the work tree (the further
the directory that contains .gitattributes is from the path in
question, the lower its precedence). Finally global and system-wide
files are considered (they have the lowest precedence).
When the .gitattributes file is missing from the work tree, the path in
the index is used as a fall-back. During checkout process,
.gitattributes in the index is used and then the file in the working
tree is used as a fall-back.
If you wish to affect only a single repository (i.e., to assign
attributes to files that are particular to one user's workflow for that
repository), then attributes should be placed in the
$GIT_DIR/info/attributes file. Attributes which should be
version-controlled and distributed to other repositories (i.e.,
attributes of interest to all users) should go into .gitattributes
files. Attributes that should affect all repositories for a single user
should be placed in a file specified by the core.attributesfile
configuration option (see git-config(1)). Its default value is
$XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not set
or empty, $HOME/.config/git/attributes is used instead. Attributes for
all users on a system should be placed in the
$(prefix)/etc/gitattributes file.
Sometimes you would need to override an setting of an attribute for a
path to Unspecified state. This can be done by listing the name of the
attribute prefixed with an exclamation point !.
EFFECTS
Certain operations by Git can be influenced by assigning particular
attributes to a path. Currently, the following operations are
attributes-aware.
Checking-out and checking-in
These attributes affect how the contents stored in the repository are
copied to the working tree files when commands such as git checkout and
git merge run. They also affect how Git stores the contents you prepare
in the working tree in the repository upon git add and git commit.
text
This attribute enables and controls end-of-line normalization. When
a text file is normalized, its line endings are converted to LF in
the repository. To control what line ending style is used in the
working directory, use the eol attribute for a single file and the
core.eol configuration variable for all text files.
Set
Setting the text attribute on a path enables end-of-line
normalization and marks the path as a text file. End-of-line
conversion takes place without guessing the content type.
Unset
Unsetting the text attribute on a path tells Git not to attempt
any end-of-line conversion upon checkin or checkout.
Set to string value "auto"
When text is set to "auto", the path is marked for automatic
end-of-line normalization. If Git decides that the content is
text, its line endings are normalized to LF on checkin.
Unspecified
If the text attribute is unspecified, Git uses the
core.autocrlf configuration variable to determine if the file
should be converted.
Any other value causes Git to act as if text has been left
unspecified.
eol
This attribute sets a specific line-ending style to be used in the
working directory. It enables end-of-line normalization without any
content checks, effectively setting the text attribute.
Set to string value "crlf"
This setting forces Git to normalize line endings for this file
on checkin and convert them to CRLF when the file is checked
out.
Set to string value "lf"
This setting forces Git to normalize line endings to LF on
checkin and prevents conversion to CRLF when the file is
checked out.
Backwards compatibility with crlf attribute
For backwards compatibility, the crlf attribute is interpreted as
follows:
crlf text
-crlf -text
crlf=input eol=lf
End-of-line conversion
While Git normally leaves file contents alone, it can be configured
to normalize line endings to LF in the repository and, optionally,
to convert them to CRLF when files are checked out.
Here is an example that will make Git normalize .txt, .vcproj and
.sh files, ensure that .vcproj files have CRLF and .sh files have
LF in the working directory, and prevent .jpg files from being
normalized regardless of their content.
*.txt text
*.vcproj eol=crlf
*.sh eol=lf
*.jpg -text
Other source code management systems normalize all text files in
their repositories, and there are two ways to enable similar
automatic normalization in Git.
If you simply want to have CRLF line endings in your working
directory regardless of the repository you are working with, you
can set the config variable "core.autocrlf" without changing any
attributes.
[core]
autocrlf = true
This does not force normalization of all text files, but does
ensure that text files that you introduce to the repository have
their line endings normalized to LF when they are added, and that
files that are already normalized in the repository stay
normalized.
If you want to interoperate with a source code management system
that enforces end-of-line normalization, or you simply want all
text files in your repository to be normalized, you should instead
set the text attribute to "auto" for all files.
* text=auto
This ensures that all files that Git considers to be text will have
normalized (LF) line endings in the repository. The core.eol
configuration variable controls which line endings Git will use for
normalized files in your working directory; the default is to use
the native line ending for your platform, or CRLF if core.autocrlf
is set.
Note
When text=auto normalization is enabled in an existing
repository, any text files containing CRLFs should be
normalized. If they are not they will be normalized the next
time someone tries to change them, causing unfortunate
misattribution. From a clean working directory:
$ echo "* text=auto" >>.gitattributes
$ rm .git/index # Remove the index to force Git to
$ git reset # re-scan the working directory
$ git status # Show files that will be normalized
$ git add -u
$ git add .gitattributes
$ git commit -m "Introduce end-of-line normalization"
If any files that should not be normalized show up in git status,
unset their text attribute before running git add -u.
manual.pdf -text
Conversely, text files that Git does not detect can have
normalization enabled manually.
weirdchars.txt text
If core.safecrlf is set to "true" or "warn", Git verifies if the
conversion is reversible for the current setting of core.autocrlf.
For "true", Git rejects irreversible conversions; for "warn", Git
only prints a warning but accepts an irreversible conversion. The
safety triggers to prevent such a conversion done to the files in
the work tree, but there are a few exceptions. Even though...
o git add itself does not touch the files in the work tree, the
next checkout would, so the safety triggers;
o git apply to update a text file with a patch does touch the
files in the work tree, but the operation is about text files
and CRLF conversion is about fixing the line ending
inconsistencies, so the safety does not trigger;
o git diff itself does not touch the files in the work tree, it
is often run to inspect the changes you intend to next git add.
To catch potential problems early, safety triggers.
ident
When the attribute ident is set for a path, Git replaces $Id$ in
the blob object with $Id:, followed by the 40-character hexadecimal
blob object name, followed by a dollar sign $ upon checkout. Any
byte sequence that begins with $Id: and ends with $ in the worktree
file is replaced with $Id$ upon check-in.
filter
A filter attribute can be set to a string value that names a filter
driver specified in the configuration.
A filter driver consists of a clean command and a smudge command,
either of which can be left unspecified. Upon checkout, when the
smudge command is specified, the command is fed the blob object
from its standard input, and its standard output is used to update
the worktree file. Similarly, the clean command is used to convert
the contents of worktree file upon checkin.
One use of the content filtering is to massage the content into a
shape that is more convenient for the platform, filesystem, and the
user to use. For this mode of operation, the key phrase here is
"more convenient" and not "turning something unusable into usable".
In other words, the intent is that if someone unsets the filter
driver definition, or does not have the appropriate filter program,
the project should still be usable.
Another use of the content filtering is to store the content that
cannot be directly used in the repository (e.g. a UUID that refers
to the true content stored outside Git, or an encrypted content)
and turn it into a usable form upon checkout (e.g. download the
external content, or decrypt the encrypted content).
These two filters behave differently, and by default, a filter is
taken as the former, massaging the contents into more convenient
shape. A missing filter driver definition in the config, or a
filter driver that exits with a non-zero status, is not an error
but makes the filter a no-op passthru.
You can declare that a filter turns a content that by itself is
unusable into a usable content by setting the
filter.<driver>.required configuration variable to true.
For example, in .gitattributes, you would assign the filter
attribute for paths.
*.c filter=indent
Then you would define a "filter.indent.clean" and
"filter.indent.smudge" configuration in your .git/config to specify
a pair of commands to modify the contents of C programs when the
source files are checked in ("clean" is run) and checked out (no
change is made because the command is "cat").
[filter "indent"]
clean = indent
smudge = cat
For best results, clean should not alter its output further if it
is run twice ("clean->clean" should be equivalent to "clean"), and
multiple smudge commands should not alter clean's output
("smudge->smudge->clean" should be equivalent to "clean"). See the
section on merging below.
The "indent" filter is well-behaved in this regard: it will not
modify input that is already correctly indented. In this case, the
lack of a smudge filter means that the clean filter must accept its
own output without modifying it.
If a filter must succeed in order to make the stored contents
usable, you can declare that the filter is required, in the
configuration:
[filter "crypt"]
clean = openssl enc ...
smudge = openssl enc -d ...
required
Sequence "%f" on the filter command line is replaced with the name
of the file the filter is working on. A filter might use this in
keyword substitution. For example:
[filter "p4"]
clean = git-p4-filter --clean %f
smudge = git-p4-filter --smudge %f
Interaction between checkin/checkout attributes
In the check-in codepath, the worktree file is first converted with
filter driver (if specified and corresponding driver defined), then
the result is processed with ident (if specified), and then finally
with text (again, if specified and applicable).
In the check-out codepath, the blob content is first converted with
text, and then ident and fed to filter.
Merging branches with differing checkin/checkout attributes
If you have added attributes to a file that cause the canonical
repository format for that file to change, such as adding a
clean/smudge filter or text/eol/ident attributes, merging anything
where the attribute is not in place would normally cause merge
conflicts.
To prevent these unnecessary merge conflicts, Git can be told to
run a virtual check-out and check-in of all three stages of a file
when resolving a three-way merge by setting the merge.renormalize
configuration variable. This prevents changes caused by check-in
conversion from causing spurious merge conflicts when a converted
file is merged with an unconverted file.
As long as a "smudge->clean" results in the same output as a
"clean" even on files that are already smudged, this strategy will
automatically resolve all filter-related conflicts. Filters that do
not act in this way may cause additional merge conflicts that must
be resolved manually.
Generating diff text
diff
The attribute diff affects how Git generates diffs for particular
files. It can tell Git whether to generate a textual patch for the
path or to treat the path as a binary file. It can also affect what
line is shown on the hunk header @@ -k,l +n,m @@ line, tell Git to
use an external command to generate the diff, or ask Git to convert
binary files to a text format before generating the diff.
Set
A path to which the diff attribute is set is treated as text,
even when they contain byte values that normally never appear
in text files, such as NUL.
Unset
A path to which the diff attribute is unset will generate
Binary files differ (or a binary patch, if binary patches are
enabled).
Unspecified
A path to which the diff attribute is unspecified first gets
its contents inspected, and if it looks like text, it is
treated as text. Otherwise it would generate Binary files
differ.
String
Diff is shown using the specified diff driver. Each driver may
specify one or more options, as described in the following
section. The options for the diff driver "foo" are defined by
the configuration variables in the "diff.foo" section of the
Git config file.
Defining an external diff driver
The definition of a diff driver is done in gitconfig, not
gitattributes file, so strictly speaking this manual page is a
wrong place to talk about it. However...
To define an external diff driver jcdiff, add a section to your
$GIT_DIR/config file (or $HOME/.gitconfig file) like this:
[diff "jcdiff"]
command = j-c-diff
When Git needs to show you a diff for the path with diff attribute
set to jcdiff, it calls the command you specified with the above
configuration, i.e. j-c-diff, with 7 parameters, just like
GIT_EXTERNAL_DIFF program is called. See git(1) for details.
Defining a custom hunk-header
Each group of changes (called a "hunk") in the textual diff output
is prefixed with a line of the form:
@@ -k,l +n,m @@ TEXT
This is called a hunk header. The "TEXT" portion is by default a
line that begins with an alphabet, an underscore or a dollar sign;
this matches what GNU diff -p output uses. This default selection
however is not suited for some contents, and you can use a
customized pattern to make a selection.
First, in .gitattributes, you would assign the diff attribute for
paths.
*.tex diff=tex
Then, you would define a "diff.tex.xfuncname" configuration to
specify a regular expression that matches a line that you would
want to appear as the hunk header "TEXT". Add a section to your
$GIT_DIR/config file (or $HOME/.gitconfig file) like this:
[diff "tex"]
xfuncname = "^(\\\\(sub)*section\\{.*)$"
Note. A single level of backslashes are eaten by the configuration
file parser, so you would need to double the backslashes; the
pattern above picks a line that begins with a backslash, and zero
or more occurrences of sub followed by section followed by open
brace, to the end of line.
There are a few built-in patterns to make this easier, and tex is
one of them, so you do not have to write the above in your
configuration file (you still need to enable this with the
attribute mechanism, via .gitattributes). The following built in
patterns are available:
o ada suitable for source code in the Ada language.
o bibtex suitable for files with BibTeX coded references.
o cpp suitable for source code in the C and C++ languages.
o csharp suitable for source code in the C# language.
o fortran suitable for source code in the Fortran language.
o html suitable for HTML/XHTML documents.
o java suitable for source code in the Java language.
o matlab suitable for source code in the MATLAB language.
o objc suitable for source code in the Objective-C language.
o pascal suitable for source code in the Pascal/Delphi language.
o perl suitable for source code in the Perl language.
o php suitable for source code in the PHP language.
o python suitable for source code in the Python language.
o ruby suitable for source code in the Ruby language.
o tex suitable for source code for LaTeX documents.
Customizing word diff
You can customize the rules that git diff --word-diff uses to split
words in a line, by specifying an appropriate regular expression in
the "diff.*.wordRegex" configuration variable. For example, in TeX
a backslash followed by a sequence of letters forms a command, but
several such commands can be run together without intervening
whitespace. To separate them, use a regular expression in your
$GIT_DIR/config file (or $HOME/.gitconfig file) like this:
[diff "tex"]
wordRegex = "\\\\[a-zA-Z]+|[{}]|\\\\.|[^\\{}[:space:]]+"
A built-in pattern is provided for all languages listed in the
previous section.
Performing text diffs of binary files
Sometimes it is desirable to see the diff of a text-converted
version of some binary files. For example, a word processor
document can be converted to an ASCII text representation, and the
diff of the text shown. Even though this conversion loses some
information, the resulting diff is useful for human viewing (but
cannot be applied directly).
The textconv config option is used to define a program for
performing such a conversion. The program should take a single
argument, the name of a file to convert, and produce the resulting
text on stdout.
For example, to show the diff of the exif information of a file
instead of the binary information (assuming you have the exif tool
installed), add the following section to your $GIT_DIR/config file
(or $HOME/.gitconfig file):
[diff "jpg"]
textconv = exif
Note
The text conversion is generally a one-way conversion; in this
example, we lose the actual image contents and focus just on
the text data. This means that diffs generated by textconv are
not suitable for applying. For this reason, only git diff and
the git log family of commands (i.e., log, whatchanged, show)
will perform text conversion. git format-patch will never
generate this output. If you want to send somebody a
text-converted diff of a binary file (e.g., because it quickly
conveys the changes you have made), you should generate it
separately and send it as a comment in addition to the usual
binary diff that you might send.
Because text conversion can be slow, especially when doing a large
number of them with git log -p, Git provides a mechanism to cache
the output and use it in future diffs. To enable caching, set the
"cachetextconv" variable in your diff driver's config. For example:
[diff "jpg"]
textconv = exif
cachetextconv = true
This will cache the result of running "exif" on each blob
indefinitely. If you change the textconv config variable for a diff
driver, Git will automatically invalidate the cache entries and
re-run the textconv filter. If you want to invalidate the cache
manually (e.g., because your version of "exif" was updated and now
produces better output), you can remove the cache manually with git
update-ref -d refs/notes/textconv/jpg (where "jpg" is the name of
the diff driver, as in the example above).
Choosing textconv versus external diff
If you want to show differences between binary or
specially-formatted blobs in your repository, you can choose to use
either an external diff command, or to use textconv to convert them
to a diff-able text format. Which method you choose depends on your
exact situation.
The advantage of using an external diff command is flexibility. You
are not bound to find line-oriented changes, nor is it necessary
for the output to resemble unified diff. You are free to locate and
report changes in the most appropriate way for your data format.
A textconv, by comparison, is much more limiting. You provide a
transformation of the data into a line-oriented text format, and
Git uses its regular diff tools to generate the output. There are
several advantages to choosing this method:
1. Ease of use. It is often much simpler to write a binary to text
transformation than it is to perform your own diff. In many
cases, existing programs can be used as textconv filters (e.g.,
exif, odt2txt).
2. Git diff features. By performing only the transformation step
yourself, you can still utilize many of Git's diff features,
including colorization, word-diff, and combined diffs for
merges.
3. Caching. Textconv caching can speed up repeated diffs, such as
those you might trigger by running git log -p.
Marking files as binary
Git usually guesses correctly whether a blob contains text or
binary data by examining the beginning of the contents. However,
sometimes you may want to override its decision, either because a
blob contains binary data later in the file, or because the
content, while technically composed of text characters, is opaque
to a human reader. For example, many postscript files contain only
ascii characters, but produce noisy and meaningless diffs.
The simplest way to mark a file as binary is to unset the diff
attribute in the .gitattributes file:
*.ps -diff
This will cause Git to generate Binary files differ (or a binary
patch, if binary patches are enabled) instead of a regular diff.
However, one may also want to specify other diff driver attributes.
For example, you might want to use textconv to convert postscript
files to an ascii representation for human viewing, but otherwise
treat them as binary files. You cannot specify both -diff and
diff=ps attributes. The solution is to use the diff.*.binary config
option:
[diff "ps"]
textconv = ps2ascii
binary = true
Performing a three-way merge
merge
The attribute merge affects how three versions of a file are merged
when a file-level merge is necessary during git merge, and other
commands such as git revert and git cherry-pick.
Set
Built-in 3-way merge driver is used to merge the contents in a
way similar to merge command of RCS suite. This is suitable for
ordinary text files.
Unset
Take the version from the current branch as the tentative merge
result, and declare that the merge has conflicts. This is
suitable for binary files that do not have a well-defined merge
semantics.
Unspecified
By default, this uses the same built-in 3-way merge driver as
is the case when the merge attribute is set. However, the
merge.default configuration variable can name different merge
driver to be used with paths for which the merge attribute is
unspecified.
String
3-way merge is performed using the specified custom merge
driver. The built-in 3-way merge driver can be explicitly
specified by asking for "text" driver; the built-in "take the
current branch" driver can be requested with "binary".
Built-in merge drivers
There are a few built-in low-level merge drivers defined that can
be asked for via the merge attribute.
text
Usual 3-way file level merge for text files. Conflicted regions
are marked with conflict markers <<<<<<<, ======= and >>>>>>>.
The version from your branch appears before the ======= marker,
and the version from the merged branch appears after the
======= marker.
binary
Keep the version from your branch in the work tree, but leave
the path in the conflicted state for the user to sort out.
union
Run 3-way file level merge for text files, but take lines from
both versions, instead of leaving conflict markers. This tends
to leave the added lines in the resulting file in random order
and the user should verify the result. Do not use this if you
do not understand the implications.
Defining a custom merge driver
The definition of a merge driver is done in the .git/config file,
not in the gitattributes file, so strictly speaking this manual
page is a wrong place to talk about it. However...
To define a custom merge driver filfre, add a section to your
$GIT_DIR/config file (or $HOME/.gitconfig file) like this:
[merge "filfre"]
name = feel-free merge driver
driver = filfre %O %A %B
recursive = binary
The merge.*.name variable gives the driver a human-readable name.
The `merge.*.driver` variable's value is used to construct a
command to run to merge ancestor's version (%O), current version
(%A) and the other branches' version (%B). These three tokens are
replaced with the names of temporary files that hold the contents
of these versions when the command line is built. Additionally, %L
will be replaced with the conflict marker size (see below).
The merge driver is expected to leave the result of the merge in
the file named with %A by overwriting it, and exit with zero status
if it managed to merge them cleanly, or non-zero if there were
conflicts.
The merge.*.recursive variable specifies what other merge driver to
use when the merge driver is called for an internal merge between
common ancestors, when there are more than one. When left
unspecified, the driver itself is used for both internal merge and
the final merge.
conflict-marker-size
This attribute controls the length of conflict markers left in the
work tree file during a conflicted merge. Only setting to the value
to a positive integer has any meaningful effect.
For example, this line in .gitattributes can be used to tell the
merge machinery to leave much longer (instead of the usual
7-character-long) conflict markers when merging the file
Documentation/git-merge.txt results in a conflict.
Documentation/git-merge.txt conflict-marker-size=32
Checking whitespace errors
whitespace
The core.whitespace configuration variable allows you to define
what diff and apply should consider whitespace errors for all paths
in the project (See git-config(1)). This attribute gives you finer
control per path.
Set
Notice all types of potential whitespace errors known to Git.
The tab width is taken from the value of the core.whitespace
configuration variable.
Unset
Do not notice anything as error.
Unspecified
Use the value of the core.whitespace configuration variable to
decide what to notice as error.
String
Specify a comma separate list of common whitespace problems to
notice in the same format as the core.whitespace configuration
variable.
Creating an archive
export-ignore
Files and directories with the attribute export-ignore won't be
added to archive files.
export-subst
If the attribute export-subst is set for a file then Git will
expand several placeholders when adding this file to an archive.
The expansion depends on the availability of a commit ID, i.e., if
git-archive(1) has been given a tree instead of a commit or a tag
then no replacement will be done. The placeholders are the same as
those for the option --pretty=format: of git-log(1), except that
they need to be wrapped like this: $Format:PLACEHOLDERS$ in the
file. E.g. the string $Format:%H$ will be replaced by the commit
hash.
Packing objects
delta
Delta compression will not be attempted for blobs for paths with
the attribute delta set to false.
Viewing files in GUI tools
encoding
The value of this attribute specifies the character encoding that
should be used by GUI tools (e.g. gitk(1) and git-gui(1)) to
display the contents of the relevant file. Note that due to
performance considerations gitk(1) does not use this attribute
unless you manually enable per-file encodings in its options.
If this attribute is not set or has an invalid value, the value of
the gui.encoding configuration variable is used instead (See git-
config(1)).
USING MACRO ATTRIBUTES
You do not want any end-of-line conversions applied to, nor textual
diffs produced for, any binary file you track. You would need to
specify e.g.
*.jpg -text -diff
but that may become cumbersome, when you have many attributes. Using
macro attributes, you can define an attribute that, when set, also sets
or unsets a number of other attributes at the same time. The system
knows a built-in macro attribute, binary:
*.jpg binary
Setting the "binary" attribute also unsets the "text" and "diff"
attributes as above. Note that macro attributes can only be "Set",
though setting one might have the effect of setting or unsetting other
attributes or even returning other attributes to the "Unspecified"
state.
DEFINING MACRO ATTRIBUTES
Custom macro attributes can be defined only in the .gitattributes file
at the toplevel (i.e. not in any subdirectory). The built-in macro
attribute "binary" is equivalent to:
[attr]binary -diff -merge -text
EXAMPLE
If you have these three gitattributes file:
(in $GIT_DIR/info/attributes)
a* foo !bar -baz
(in .gitattributes)
abc foo bar baz
(in t/.gitattributes)
ab* merge=filfre
abc -foo -bar
*.c frotz
the attributes given to path t/abc are computed as follows:
1. By examining t/.gitattributes (which is in the same directory as
the path in question), Git finds that the first line matches.
merge attribute is set. It also finds that the second line matches,
and attributes foo and bar are unset.
2. Then it examines .gitattributes (which is in the parent directory),
and finds that the first line matches, but t/.gitattributes file
already decided how merge, foo and bar attributes should be given
to this path, so it leaves foo and bar unset. Attribute baz is set.
3. Finally it examines $GIT_DIR/info/attributes. This file is used to
override the in-tree settings. The first line is a match, and foo
is set, bar is reverted to unspecified state, and baz is unset.
As the result, the attributes assignment to t/abc becomes:
foo set to true
bar unspecified
baz set to false
merge set to string value "filfre"
frotz unspecified
SEE ALSO
git-check-attr(1).
GIT
Part of the git(1) suite
Git 1.8.3.1 07/30/2024 GITATTRIBUTES(5)
Linux-Distributionen
Huschi als Linux-Admin