git-pull(images) - phpMan

GIT-PULL(1)                       Git Manual                       GIT-PULL(1)

NAME
       git-pull - Fetch from and merge with another repository or a local
       branch
SYNOPSIS
       git pull [options] [<repository> [<refspec>...]]

DESCRIPTION
       Incorporates changes from a remote repository into the current branch.
       In its default mode, git pull is shorthand for git fetch followed by
       git merge FETCH_HEAD.
       More precisely, git pull runs git fetch with the given parameters and
       calls git merge to merge the retrieved branch heads into the current
       branch. With --rebase, it runs git rebase instead of git merge.
       <repository> should be the name of a remote repository as passed to
       git-fetch(1). <refspec> can name an arbitrary remote ref (for example,
       the name of a tag) or even a collection of refs with corresponding
       remote-tracking branches (e.g., refs/heads/*:refs/remotes/origin/*),
       but usually it is the name of a branch in the remote repository.
       Default values for <repository> and <branch> are read from the "remote"
       and "merge" configuration for the current branch as set by git-
       branch(1) --track.
       Assume the following history exists and the current branch is "master":
                     A---B---C master on origin
                    /
               D---E---F---G master

       Then "git pull" will fetch and replay the changes from the remote
       master branch since it diverged from the local master (i.e., E) until
       its current commit (C) on top of master and record the result in a new
       commit along with the names of the two parent commits and a log message
       from the user describing the changes.
                     A---B---C remotes/origin/master
                    /         \
               D---E---F---G---H master

       See git-merge(1) for details, including how conflicts are presented and
       handled.
       In Git 1.7.0 or later, to cancel a conflicting merge, use git reset
       --merge. Warning: In older versions of Git, running git pull with
       uncommitted changes is discouraged: while possible, it leaves you in a
       state that may be hard to back out of in the case of a conflict.
       If any of the remote changes overlap with local uncommitted changes,
       the merge will be automatically cancelled and the work tree untouched.
       It is generally best to get any local changes in working order before
       pulling or stash them away with git-stash(1).
OPTIONS
       Options meant for git pull itself and the underlying git merge must be
       given before the options meant for git fetch.
       -q, --quiet
           This is passed to both underlying git-fetch to squelch reporting of
           during transfer, and underlying git-merge to squelch output during
           merging.
       -v, --verbose
           Pass --verbose to git-fetch and git-merge.
       --[no-]recurse-submodules[=yes|on-demand|no]
           This option controls if new commits of all populated submodules
           should be fetched too (see git-config(1) and gitmodules(5)). That
           might be necessary to get the data needed for merging submodule
           commits, a feature Git learned in 1.7.3. Notice that the result of
           a merge will not be checked out in the submodule, "git submodule
           update" has to be called afterwards to bring the work tree up to
           date with the merge result.
   Options related to merging
       --commit, --no-commit
           Perform the merge and commit the result. This option can be used to
           override --no-commit.
           With --no-commit perform the merge but pretend the merge failed and
           do not autocommit, to give the user a chance to inspect and further
           tweak the merge result before committing.
       --edit, --no-edit
           Invoke an editor before committing successful mechanical merge to
           further edit the auto-generated merge message, so that the user can
           explain and justify the merge. The --no-edit option can be used to
           accept the auto-generated message (this is generally discouraged).
           The --edit option is still useful if you are giving a draft message
           with the -m option from the command line and want to edit it in the
           editor.
           Older scripts may depend on the historical behaviour of not
           allowing the user to edit the merge log message. They will see an
           editor opened when they run git merge. To make it easier to adjust
           such scripts to the updated behaviour, the environment variable
           GIT_MERGE_AUTOEDIT can be set to no at the beginning of them.
       --ff
           When the merge resolves as a fast-forward, only update the branch
           pointer, without creating a merge commit. This is the default
           behavior.
       --no-ff
           Create a merge commit even when the merge resolves as a
           fast-forward. This is the default behaviour when merging an
           annotated (and possibly signed) tag.
       --ff-only
           Refuse to merge and exit with a non-zero status unless the current
           HEAD is already up-to-date or the merge can be resolved as a
           fast-forward.
       --log[=<n>], --no-log
           In addition to branch names, populate the log message with one-line
           descriptions from at most <n> actual commits that are being merged.
           See also git-fmt-merge-msg(1).
           With --no-log do not list one-line descriptions from the actual
           commits being merged.
       --stat, -n, --no-stat
           Show a diffstat at the end of the merge. The diffstat is also
           controlled by the configuration option merge.stat.
           With -n or --no-stat do not show a diffstat at the end of the
           merge.
       --squash, --no-squash
           Produce the working tree and index state as if a real merge
           happened (except for the merge information), but do not actually
           make a commit or move the HEAD, nor record $GIT_DIR/MERGE_HEAD to
           cause the next git commit command to create a merge commit. This
           allows you to create a single commit on top of the current branch
           whose effect is the same as merging another branch (or more in case
           of an octopus).
           With --no-squash perform the merge and commit the result. This
           option can be used to override --squash.
       -s <strategy>, --strategy=<strategy>
           Use the given merge strategy; can be supplied more than once to
           specify them in the order they should be tried. If there is no -s
           option, a built-in list of strategies is used instead (git
           merge-recursive when merging a single head, git merge-octopus
           otherwise).
       -X <option>, --strategy-option=<option>
           Pass merge strategy specific option through to the merge strategy.
       --verify-signatures, --no-verify-signatures
           Verify that the commits being merged have good and trusted GPG
           signatures and abort the merge in case they do not.
       --summary, --no-summary
           Synonyms to --stat and --no-stat; these are deprecated and will be
           removed in the future.
       -q, --quiet
           Operate quietly. Implies --no-progress.
       -v, --verbose
           Be verbose.
       --progress, --no-progress
           Turn progress on/off explicitly. If neither is specified, progress
           is shown if standard error is connected to a terminal. Note that
           not all merge strategies may support progress reporting.
       -r, --rebase
           Rebase the current branch on top of the upstream branch after
           fetching. If there is a remote-tracking branch corresponding to the
           upstream branch and the upstream branch was rebased since last
           fetched, the rebase uses that information to avoid rebasing
           non-local changes.
           See pull.rebase, branch.<name>.rebase and branch.autosetuprebase in
           git-config(1) if you want to make git pull always use --rebase
           instead of merging.
               Note
               This is a potentially dangerous mode of operation. It rewrites
               history, which does not bode well when you published that
               history already. Do not use this option unless you have read
               git-rebase(1) carefully.
       --no-rebase
           Override earlier --rebase.
   Options related to fetching
       --all
           Fetch all remotes.
       -a, --append
           Append ref names and object names of fetched refs to the existing
           contents of .git/FETCH_HEAD. Without this option old data in
           .git/FETCH_HEAD will be overwritten.
       --depth=<depth>
           Deepen or shorten the history of a shallow repository created by
           git clone with --depth=<depth> option (see git-clone(1)) to the
           specified number of commits from the tip of each remote branch
           history. Tags for the deepened commits are not fetched.
       --unshallow
           Convert a shallow repository to a complete one, removing all the
           limitations imposed by shallow repositories.
       -f, --force
           When git fetch is used with <rbranch>:<lbranch> refspec, it refuses
           to update the local branch <lbranch> unless the remote branch
           <rbranch> it fetches is a descendant of <lbranch>. This option
           overrides that check.
       -k, --keep
           Keep downloaded pack.
       --no-tags
           By default, tags that point at objects that are downloaded from the
           remote repository are fetched and stored locally. This option
           disables this automatic tag following. The default behavior for a
           remote may be specified with the remote.<name>.tagopt setting. See
           git-config(1).
       -u, --update-head-ok
           By default git fetch refuses to update the head which corresponds
           to the current branch. This flag disables the check. This is purely
           for the internal use for git pull to communicate with git fetch,
           and unless you are implementing your own Porcelain you are not
           supposed to use it.
       --upload-pack <upload-pack>
           When given, and the repository to fetch from is handled by git
           fetch-pack, --exec=<upload-pack> is passed to the command to
           specify non-default path for the command run on the other end.
       --progress
           Progress status is reported on the standard error stream by default
           when it is attached to a terminal, unless -q is specified. This
           flag forces progress status even if the standard error stream is
           not directed to a terminal.
       <repository>
           The "remote" repository that is the source of a fetch or pull
           operation. This parameter can be either a URL (see the section GIT
           URLS below) or the name of a remote (see the section REMOTES
           below).
       <refspec>
           The format of a <refspec> parameter is an optional plus +, followed
           by the source ref <src>, followed by a colon :, followed by the
           destination ref <dst>.
           The remote ref that matches <src> is fetched, and if <dst> is not
           empty string, the local ref that matches it is fast-forwarded using
           <src>. If the optional plus + is used, the local ref is updated
           even if it does not result in a fast-forward update.
               Note
               If the remote branch from which you want to pull is modified in
               non-linear ways such as being rewound and rebased frequently,
               then a pull will attempt a merge with an older version of
               itself, likely conflict, and fail. It is under these conditions
               that you would want to use the + sign to indicate
               non-fast-forward updates will be needed. There is currently no
               easy way to determine or declare that a branch will be made
               available in a repository with this behavior; the pulling user
               simply must know this is the expected usage pattern for a
               branch.
               Note
               You never do your own development on branches that appear on
               the right hand side of a <refspec> colon on Pull: lines; they
               are to be updated by git fetch. If you intend to do development
               derived from a remote branch B, have a Pull: line to track it
               (i.e.  Pull: B:remote-B), and have a separate branch my-B to do
               your development on top of it. The latter is created by git
               branch my-B remote-B (or its equivalent git checkout -b my-B
               remote-B). Run git fetch to keep track of the progress of the
               remote side, and when you see something new on the remote
               branch, merge it into your development branch with git pull .
               remote-B, while you are on my-B branch.
               Note
               There is a difference between listing multiple <refspec>
               directly on git pull command line and having multiple Pull:
               <refspec> lines for a <repository> and running git pull command
               without any explicit <refspec> parameters. <refspec> listed
               explicitly on the command line are always merged into the
               current branch after fetching. In other words, if you list more
               than one remote refs, you would be making an Octopus. While git
               pull run without any explicit <refspec> parameter takes default
               <refspec>s from Pull: lines, it merges only the first <refspec>
               found into the current branch, after fetching all the remote
               refs. This is because making an Octopus from remote refs is
               rarely done, while keeping track of multiple remote heads in
               one-go by fetching more than one is often useful.
           Some short-cut notations are also supported.
           o   tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>; it
               requests fetching everything up to the given tag.
           o   A parameter <ref> without a colon is equivalent to <ref>: when
               pulling/fetching, so it merges <ref> into the current branch
               without storing the remote branch anywhere locally
GIT URLS
       In general, URLs contain information about the transport protocol, the
       address of the remote server, and the path to the repository. Depending
       on the transport protocol, some of this information may be absent.
       Git supports ssh, git, http, and https protocols (in addition, ftp, and
       ftps can be used for fetching and rsync can be used for fetching and
       pushing, but these are inefficient and deprecated; do not use them).
       The following syntaxes may be used with them:
       o   ssh://[user@]host.xz[:port]/path/to/repo.git/
       o   git://host.xz[:port]/path/to/repo.git/
       o   http[s]://host.xz[:port]/path/to/repo.git/
       o   ftp[s]://host.xz[:port]/path/to/repo.git/
       o   rsync://host.xz/path/to/repo.git/
       An alternative scp-like syntax may also be used with the ssh protocol:
       o   [user@]host.xz:path/to/repo.git/
       The ssh and git protocols additionally support ~username expansion:
       o   ssh://[user@]host.xz[:port]/~[user]/path/to/repo.git/
       o   git://host.xz[:port]/~[user]/path/to/repo.git/
       o   [user@]host.xz:/~[user]/path/to/repo.git/
       For local repositories, also supported by Git natively, the following
       syntaxes may be used:
       o   /path/to/repo.git/
       o   file:///path/to/repo.git/
       These two syntaxes are mostly equivalent, except when cloning, when the
       former implies --local option. See git-clone(1) for details.
       When Git doesn't know how to handle a certain transport protocol, it
       attempts to use the remote-<transport> remote helper, if one exists. To
       explicitly request a remote helper, the following syntax may be used:
       o   <transport>::<address>
       where <address> may be a path, a server and path, or an arbitrary
       URL-like string recognized by the specific remote helper being invoked.
       See gitremote-helpers(1) for details.
       If there are a large number of similarly-named remote repositories and
       you want to use a different format for them (such that the URLs you use
       will be rewritten into URLs that work), you can create a configuration
       section of the form:
                   [url "<actual url base>"]
                           insteadOf = <other url base>

       For example, with this:
                   [url "git://git.host.xz/"]
                           insteadOf = host.xz:/path/to/
                           insteadOf = work:

       a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be
       rewritten in any context that takes a URL to be
       "git://git.host.xz/repo.git".
       If you want to rewrite URLs for push only, you can create a
       configuration section of the form:
                   [url "<actual url base>"]
                           pushInsteadOf = <other url base>

       For example, with this:
                   [url "ssh://example.org/"]
                           pushInsteadOf = git://example.org/

       a URL like "git://example.org/path/to/repo.git" will be rewritten to
       "ssh://example.org/path/to/repo.git" for pushes, but pulls will still
       use the original URL.
REMOTES
       The name of one of the following can be used instead of a URL as
       <repository> argument:
       o   a remote in the Git configuration file: $GIT_DIR/config,
       o   a file in the $GIT_DIR/remotes directory, or
       o   a file in the $GIT_DIR/branches directory.
       All of these also allow you to omit the refspec from the command line
       because they each contain a refspec which git will use by default.
   Named remote in configuration file
       You can choose to provide the name of a remote which you had previously
       configured using git-remote(1), git-config(1) or even by a manual edit
       to the $GIT_DIR/config file. The URL of this remote will be used to
       access the repository. The refspec of this remote will be used by
       default when you do not provide a refspec on the command line. The
       entry in the config file would appear like this:
                   [remote "<name>"]
                           url = <url>
                           pushurl = <pushurl>
                           push = <refspec>
                           fetch = <refspec>

       The <pushurl> is used for pushes only. It is optional and defaults to
       <url>.
   Named file in $GIT_DIR/remotes
       You can choose to provide the name of a file in $GIT_DIR/remotes. The
       URL in this file will be used to access the repository. The refspec in
       this file will be used as default when you do not provide a refspec on
       the command line. This file should have the following format:
                   URL: one of the above URL format
                   Push: <refspec>
                   Pull: <refspec>

       Push: lines are used by git push and Pull: lines are used by git pull
       and git fetch. Multiple Push: and Pull: lines may be specified for
       additional branch mappings.
   Named file in $GIT_DIR/branches
       You can choose to provide the name of a file in $GIT_DIR/branches. The
       URL in this file will be used to access the repository. This file
       should have the following format:
                   <url>#<head>

       <url> is required; #<head> is optional.
       Depending on the operation, git will use one of the following refspecs,
       if you don't provide one on the command line. <branch> is the name of
       this file in $GIT_DIR/branches and <head> defaults to master.
       git fetch uses:
                   refs/heads/<head>:refs/heads/<branch>

       git push uses:
                   HEAD:refs/heads/<head>

MERGE STRATEGIES
       The merge mechanism (git-merge and git-pull commands) allows the
       backend merge strategies to be chosen with -s option. Some strategies
       can also take their own options, which can be passed by giving
       -X<option> arguments to git-merge and/or git-pull.
       resolve
           This can only resolve two heads (i.e. the current branch and
           another branch you pulled from) using a 3-way merge algorithm. It
           tries to carefully detect criss-cross merge ambiguities and is
           considered generally safe and fast.
       recursive
           This can only resolve two heads using a 3-way merge algorithm. When
           there is more than one common ancestor that can be used for 3-way
           merge, it creates a merged tree of the common ancestors and uses
           that as the reference tree for the 3-way merge. This has been
           reported to result in fewer merge conflicts without causing
           mis-merges by tests done on actual merge commits taken from Linux
           2.6 kernel development history. Additionally this can detect and
           handle merges involving renames. This is the default merge strategy
           when pulling or merging one branch.
           The recursive strategy can take the following options:
           ours
               This option forces conflicting hunks to be auto-resolved
               cleanly by favoring our version. Changes from the other tree
               that do not conflict with our side are reflected to the merge
               result. For a binary file, the entire contents are taken from
               our side.
               This should not be confused with the ours merge strategy, which
               does not even look at what the other tree contains at all. It
               discards everything the other tree did, declaring our history
               contains all that happened in it.
           theirs
               This is the opposite of ours.
           patience
               With this option, merge-recursive spends a little extra time to
               avoid mismerges that sometimes occur due to unimportant
               matching lines (e.g., braces from distinct functions). Use this
               when the branches to be merged have diverged wildly. See also
               git-diff(1)--patience.
           diff-algorithm=[patience|minimal|histogram|myers]
               Tells merge-recursive to use a different diff algorithm, which
               can help avoid mismerges that occur due to unimportant matching
               lines (such as braces from distinct functions). See also git-
               diff(1)--diff-algorithm.
           ignore-space-change, ignore-all-space, ignore-space-at-eol
               Treats lines with the indicated type of whitespace change as
               unchanged for the sake of a three-way merge. Whitespace changes
               mixed with other changes to a line are not ignored. See also
               git-diff(1)-b, -w, and --ignore-space-at-eol.
               o   If their version only introduces whitespace changes to a
                   line, our version is used;
               o   If our version introduces whitespace changes but their
                   version includes a substantial change, their version is
                   used;
               o   Otherwise, the merge proceeds in the usual way.
           renormalize
               This runs a virtual check-out and check-in of all three stages
               of a file when resolving a three-way merge. This option is
               meant to be used when merging branches with different clean
               filters or end-of-line normalization rules. See "Merging
               branches with differing checkin/checkout attributes" in
               gitattributes(5) for details.
           no-renormalize
               Disables the renormalize option. This overrides the
               merge.renormalize configuration variable.
           rename-threshold=<n>
               Controls the similarity threshold used for rename detection.
               See also git-diff(1)-M.
           subtree[=<path>]
               This option is a more advanced form of subtree strategy, where
               the strategy makes a guess on how two trees must be shifted to
               match with each other when merging. Instead, the specified path
               is prefixed (or stripped from the beginning) to make the shape
               of two trees to match.
       octopus
           This resolves cases with more than two heads, but refuses to do a
           complex merge that needs manual resolution. It is primarily meant
           to be used for bundling topic branch heads together. This is the
           default merge strategy when pulling or merging more than one
           branch.
       ours
           This resolves any number of heads, but the resulting tree of the
           merge is always that of the current branch head, effectively
           ignoring all changes from all other branches. It is meant to be
           used to supersede old development history of side branches. Note
           that this is different from the -Xours option to the recursive
           merge strategy.
       subtree
           This is a modified recursive strategy. When merging trees A and B,
           if B corresponds to a subtree of A, B is first adjusted to match
           the tree structure of A, instead of reading the trees at the same
           level. This adjustment is also done to the common ancestor tree.
DEFAULT BEHAVIOUR
       Often people use git pull without giving any parameter. Traditionally,
       this has been equivalent to saying git pull origin. However, when
       configuration branch.<name>.remote is present while on branch <name>,
       that value is used instead of origin.
       In order to determine what URL to use to fetch from, the value of the
       configuration remote.<origin>.url is consulted and if there is not any
       such variable, the value on URL: ` line in `$GIT_DIR/remotes/<origin>
       file is used.
       In order to determine what remote branches to fetch (and optionally
       store in the remote-tracking branches) when the command is run without
       any refspec parameters on the command line, values of the configuration
       variable remote.<origin>.fetch are consulted, and if there aren't any,
       $GIT_DIR/remotes/<origin> file is consulted and its `Pull: ` lines are
       used. In addition to the refspec formats described in the OPTIONS
       section, you can have a globbing refspec that looks like this:
           refs/heads/*:refs/remotes/origin/*

       A globbing refspec must have a non-empty RHS (i.e. must store what were
       fetched in remote-tracking branches), and its LHS and RHS must end with
       /*. The above specifies that all remote branches are tracked using
       remote-tracking branches in refs/remotes/origin/ hierarchy under the
       same name.
       The rule to determine which remote branch to merge after fetching is a
       bit involved, in order not to break backward compatibility.
       If explicit refspecs were given on the command line of git pull, they
       are all merged.
       When no refspec was given on the command line, then git pull uses the
       refspec from the configuration or $GIT_DIR/remotes/<origin>. In such
       cases, the following rules apply:
        1. If branch.<name>.merge configuration for the current branch <name>
           exists, that is the name of the branch at the remote site that is
           merged.
        2. If the refspec is a globbing one, nothing is merged.
        3. Otherwise the remote branch of the first refspec is merged.
EXAMPLES
       o   Update the remote-tracking branches for the repository you cloned
           from, then merge one of them into your current branch:
               $ git pull, git pull origin
           Normally the branch merged in is the HEAD of the remote repository,
           but the choice is determined by the branch.<name>.remote and
           branch.<name>.merge options; see git-config(1) for details.
       o   Merge into the current branch the remote branch next:
               $ git pull origin next
           This leaves a copy of next temporarily in FETCH_HEAD, but does not
           update any remote-tracking branches. Using remote-tracking
           branches, the same can be done by invoking fetch and merge:
               $ git fetch origin
               $ git merge origin/next

       If you tried a pull which resulted in complex conflicts and would want
       to start over, you can recover with git reset.
BUGS
       Using --recurse-submodules can only fetch new commits in already
       checked out submodules right now. When e.g. upstream added a new
       submodule in the just fetched commits of the superproject the submodule
       itself can not be fetched, making it impossible to check out that
       submodule later without having to do a fetch again. This is expected to
       be fixed in a future Git version.
SEE ALSO
       git-fetch(1), git-merge(1), git-config(1)
GIT
       Part of the git(1) suite

Git 1.8.3.1                       07/30/2024                       GIT-PULL(1)