EPOLL_CTL(2) Linux Programmer's Manual EPOLL_CTL(2)
NAME
epoll_ctl - control interface for an epoll file descriptor
SYNOPSIS
#include <sys/epoll.h>
int epoll_ctl(int epfd, int op, int fd, struct epoll_event *event);
DESCRIPTION
This system call performs control operations on the epoll(7) instance
referred to by the file descriptor epfd. It requests that the opera-
tion op be performed for the target file descriptor, fd.
Valid values for the op argument are:
EPOLL_CTL_ADD
Register the target file descriptor fd on the epoll instance
referred to by the file descriptor epfd and associate the event
event with the internal file linked to fd.
EPOLL_CTL_MOD
Change the event event associated with the target file descrip-
tor fd.
EPOLL_CTL_DEL
Remove (deregister) the target file descriptor fd from the epoll
instance referred to by epfd. The event is ignored and can be
NULL (but see BUGS below).
The event argument describes the object linked to the file descriptor
fd. The struct epoll_event is defined as:
typedef union epoll_data {
void *ptr;
int fd;
uint32_t u32;
uint64_t u64;
} epoll_data_t;
struct epoll_event {
uint32_t events; /* Epoll events */
epoll_data_t data; /* User data variable */
};
The events member is a bit mask composed by ORing together zero or more
of the following available event types:
EPOLLIN
The associated file is available for read(2) operations.
EPOLLOUT
The associated file is available for write(2) operations.
EPOLLRDHUP (since Linux 2.6.17)
Stream socket peer closed connection, or shut down writing half
of connection. (This flag is especially useful for writing sim-
ple code to detect peer shutdown when using Edge Triggered moni-
toring.)
EPOLLPRI
There is an exceptional condition on the file descriptor. See
the discussion of POLLPRI in poll(2).
EPOLLERR
Error condition happened on the associated file descriptor.
This event is also reported for the write end of a pipe when the
read end has been closed. epoll_wait(2) will always report for
this event; it is not necessary to set it in events.
EPOLLHUP
Hang up happened on the associated file descriptor.
epoll_wait(2) will always wait for this event; it is not neces-
sary to set it in events.
Note that when reading from a channel such as a pipe or a stream
socket, this event merely indicates that the peer closed its end
of the channel. Subsequent reads from the channel will return 0
(end of file) only after all outstanding data in the channel has
been consumed.
EPOLLET
Sets the Edge Triggered behavior for the associated file
descriptor. The default behavior for epoll is Level Triggered.
See epoll(7) for more detailed information about Edge and Level
Triggered event distribution architectures.
EPOLLONESHOT (since Linux 2.6.2)
Sets the one-shot behavior for the associated file descriptor.
This means that after an event is pulled out with epoll_wait(2)
the associated file descriptor is internally disabled and no
other events will be reported by the epoll interface. The user
must call epoll_ctl() with EPOLL_CTL_MOD to rearm the file
descriptor with a new event mask.
EPOLLWAKEUP (since Linux 3.5)
If EPOLLONESHOT and EPOLLET are clear and the process has the
CAP_BLOCK_SUSPEND capability, ensure that the system does not
enter "suspend" or "hibernate" while this event is pending or
being processed. The event is considered as being "processed"
from the time when it is returned by a call to epoll_wait(2)
until the next call to epoll_wait(2) on the same epoll(7) file
descriptor, the closure of that file descriptor, the removal of
the event file descriptor with EPOLL_CTL_DEL, or the clearing of
EPOLLWAKEUP for the event file descriptor with EPOLL_CTL_MOD.
See also BUGS.
EPOLLEXCLUSIVE (since Linux 4.5)
Sets an exclusive wakeup mode for the epoll file descriptor that
is being attached to the target file descriptor, fd. When a
wakeup event occurs and multiple epoll file descriptors are
attached to the same target file using EPOLLEXCLUSIVE, one or
more of the epoll file descriptors will receive an event with
epoll_wait(2). The default in this scenario (when EPOLLEXCLU-
SIVE is not set) is for all epoll file descriptors to receive an
event. EPOLLEXCLUSIVE is thus useful for avoiding thundering
herd problems in certain scenarios.
If the same file descriptor is in multiple epoll instances, some
with the EPOLLEXCLUSIVE flag, and others without, then events
will be provided to all epoll instances that did not specify
EPOLLEXCLUSIVE, and at least one of the epoll instances that did
specify EPOLLEXCLUSIVE.
The following values may be specified in conjunction with
EPOLLEXCLUSIVE: EPOLLIN, EPOLLOUT, EPOLLWAKEUP, and EPOLLET.
EPOLLHUP and EPOLLERR can also be specified, but this is not
required: as usual, these events are always reported if they
occur, regardless of whether they are specified in events.
Attempts to specify other values in events yield an error.
EPOLLEXCLUSIVE may be used only in an EPOLL_CTL_ADD operation;
attempts to employ it with EPOLL_CTL_MOD yield an error. If
EPOLLEXCLUSIVE has been set using epoll_ctl(), then a subsequent
EPOLL_CTL_MOD on the same epfd, fd pair yields an error. A call
to epoll_ctl() that specifies EPOLLEXCLUSIVE in events and spec-
ifies the target file descriptor fd as an epoll instance will
likewise fail. The error in all of these cases is EINVAL.
RETURN VALUE
When successful, epoll_ctl() returns zero. When an error occurs,
epoll_ctl() returns -1 and errno is set appropriately.
ERRORS
EBADF epfd or fd is not a valid file descriptor.
EEXIST op was EPOLL_CTL_ADD, and the supplied file descriptor fd is
already registered with this epoll instance.
EINVAL epfd is not an epoll file descriptor, or fd is the same as epfd,
or the requested operation op is not supported by this inter-
face.
EINVAL An invalid event type was specified along with EPOLLEXCLUSIVE in
events.
EINVAL op was EPOLL_CTL_MOD and events included EPOLLEXCLUSIVE.
EINVAL op was EPOLL_CTL_MOD and the EPOLLEXCLUSIVE flag has previously
been applied to this epfd, fd pair.
EINVAL EPOLLEXCLUSIVE was specified in event and fd refers to an epoll
instance.
ELOOP fd refers to an epoll instance and this EPOLL_CTL_ADD operation
would result in a circular loop of epoll instances monitoring
one another.
ENOENT op was EPOLL_CTL_MOD or EPOLL_CTL_DEL, and fd is not registered
with this epoll instance.
ENOMEM There was insufficient memory to handle the requested op control
operation.
ENOSPC The limit imposed by /proc/sys/fs/epoll/max_user_watches was
encountered while trying to register (EPOLL_CTL_ADD) a new file
descriptor on an epoll instance. See epoll(7) for further
details.
EPERM The target file fd does not support epoll. This error can occur
if fd refers to, for example, a regular file or a directory.
VERSIONS
epoll_ctl() was added to the kernel in version 2.6.
CONFORMING TO
epoll_ctl() is Linux-specific. Library support is provided in glibc
starting with version 2.3.2.
NOTES
The epoll interface supports all file descriptors that support poll(2).
BUGS
In kernel versions before 2.6.9, the EPOLL_CTL_DEL operation required a
non-null pointer in event, even though this argument is ignored. Since
Linux 2.6.9, event can be specified as NULL when using EPOLL_CTL_DEL.
Applications that need to be portable to kernels before 2.6.9 should
specify a non-null pointer in event.
If EPOLLWAKEUP is specified in flags, but the caller does not have the
CAP_BLOCK_SUSPEND capability, then the EPOLLWAKEUP flag is silently
ignored. This unfortunate behavior is necessary because no validity
checks were performed on the flags argument in the original implementa-
tion, and the addition of the EPOLLWAKEUP with a check that caused the
call to fail if the caller did not have the CAP_BLOCK_SUSPEND capabil-
ity caused a breakage in at least one existing user-space application
that happened to randomly (and uselessly) specify this bit. A robust
application should therefore double check that it has the
CAP_BLOCK_SUSPEND capability if attempting to use the EPOLLWAKEUP flag.
SEE ALSO
epoll_create(2), epoll_wait(2), poll(2), epoll(7)
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 EPOLL_CTL(2)
Linux-Distributionen
Huschi als Linux-Admin