UDISKSCTL(1) User Commands UDISKSCTL(1)
NAME
udisksctl - The udisks command line tool
SYNOPSIS
udisksctl status
udisksctl info {--object-path OBJECT | --block-device DEVICE |
--drive DRIVE}
udisksctl mount {--object-path OBJECT | --block-device DEVICE}
[--filesystem-type TYPE] [--options OPTIONS...]
[--no-user-interaction]
udisksctl unmount {--object-path OBJECT | --block-device DEVICE}
[--force] [--no-user-interaction]
udisksctl unlock {--object-path OBJECT | --block-device DEVICE}
[--no-user-interaction] [--key-file PATH] [--read-only]
udisksctl lock {--object-path OBJECT | --block-device DEVICE}
[--no-user-interaction]
udisksctl loop-setup --file PATH [--read-only] [--offset OFFSET]
[--size SIZE] [--no-user-interaction]
udisksctl loop-delete {--object-path OBJECT | --block-device DEVICE}
[--no-user-interaction]
udisksctl power-off {--object-path OBJECT | --block-device DEVICE}
[--no-user-interaction]
udisksctl smart-simulate --file PATH {--object-path OBJECT |
--block-device DEVICE} [--no-user-interaction]
udisksctl monitor
udisksctl dump
udisksctl help
DESCRIPTION
udisksctl is a command-line program used to interact with the
udisksd(8) daemon process.
COMMANDS
status
Shows high-level information about disk drives and block devices.
info
Shows detailed information about OBJECT, DEVICE or DRIVE.
mount
Mounts a device. The device will be mounted in a subdirectory in
the /run/media hierarchy - upon successful completion, the mount
point will be printed to standard output.
-t, --filesystem-type
Filesystem type to use. If not specified, autodetected
filesystem type will be used.
-o, --options
The device will be mounted with a safe set of default options.
You can influence the options passed to the mount(8) command
using this option. Note that only safe options are allowed -
requests with inherently unsafe options such as suid or dev
that would allow the caller to gain additional privileges, are
rejected.
unmount
Unmounts a device. This only works if the device is mounted. The
option --force can be used to request that the device is unmounted
even if active references exists.
-f, --force
Lazy unmount. Detach the filesystem from the file hierarchy
now, and clean up all references to this filesystem as soon as
it is not busy anymore.
unlock
Unlocks an encrypted device. The passphrase will be requested from
the controlling terminal and upon successful completion, the
cleartext device will be printed to standard output.
--key-file=PATH
Read passphrase from the given file.
lock
Locks a device. This only works if the device is a cleartext device
backed by a cryptotext device.
loop-setup
Sets up a loop device backed by FILE.
-f, --file=FILE
File to set up a loop device for.
-r, --read-only
Set up a read-only loop device.
-o, --offset=OFFSET
The data start is moved OFFSET bytes into the specified file.
-s, --size=SIZE
The data end is set to no more than SIZE bytes after the data
start.
loop-delete
Tears down a loop device.
power-off
Arranges for the drive to be safely removed and powered off. On the
OS side this includes ensuring that no process is using the drive,
then requesting that in-flight buffers and caches are committed to
stable storage. The exact steps for powering off the drive depends
on the drive itself and the interconnect used. For drives connected
through USB, the effect is that the USB device will be deconfigured
followed by disabling the upstream hub port it is connected to.
Note that as some physical devices contain multiple drives (for
example 4-in-1 flash card reader USB devices) powering off one
drive may affect other drives. As such there are not a lot of
guarantees associated with performing this action. Usually the
effect is that the drive disappears as if it was unplugged.
smart-simulate
Sets SMART data from the libatasmart blob given by FILE - see
/usr/share/doc/libatasmart-devel-VERSION/ for blobs shipped with
libatasmart. This is a debugging feature used to check that
applications act correctly when a disk is failing.
-f, --file=FILE
File with the libatasmart blob.
monitor
Monitors the daemon for events.
dump
Prints the current state of the daemon.
help
Prints help and exit.
DEVICE SPECIFICATION
For commands that require a device as an argument following options can
be used to specify it.
-b, --block-device=DEVICE
Specify a device by its device file path. For example /dev/sda.
-p, --object-path=OBJECT
Specify a device by the UDisks internal object path without the
/org/freedesktop/UDisks2 prefix. For example block_devices/sda for
the /dev/sda disk.
-d, --drive=DRIVE
Specify a drive by name, for example VirtIO_Disk. This can be
currently used only together with the info command.
COMMON OPTIONS
The option --no-user-interaction can be used to request that no
interaction (such as the user being presented with an authentication
dialog) must occur when checking with polkit(8) whether the caller is
authorized to perform the requested action.
AUDIENCE
This program does not assume that the caller is the super user - it is
intended to be used by unprivileged users and authorizations are
checked by the udisks daemon using polkit(8). Additionally, this
program is not intended to be used by scripts or other programs -
options/commands may change in incompatible ways in the future even in
maintenance releases. See the "API STABILITY" section of udisks(8) for
more information.
BASH COMPLETION
udisksctl ships with a bash completion script to complete commands,
objects, block devices and some options.
AUTHOR
This man page was originally written for UDisks2 by David Zeuthen
<zeuthen AT gmail.com> with a lot of help from many others.
BUGS
Please send bug reports to either the distribution bug tracker or the
upstream bug tracker at
https://github.com/storaged-project/udisks/issues.
SEE ALSO
udisks(8), udisksd(8), umount.udisks2(8), polkit(8)
udisks 2.9.0 August 2018 UDISKSCTL(1)
Linux-Distributionen
Huschi als Linux-Admin