STTY(inc) - phpMan

STTY(1)                          User Commands                         STTY(1)

NAME
       stty - change and print terminal line settings
SYNOPSIS
       stty [-F DEVICE | --file=DEVICE] [SETTING]...
       stty [-F DEVICE | --file=DEVICE] [-a|--all]
       stty [-F DEVICE | --file=DEVICE] [-g|--save]
DESCRIPTION
       Print or change terminal characteristics.
       Mandatory  arguments  to  long  options are mandatory for short options
       too.
       -a, --all
              print all current settings in human-readable form
       -g, --save
              print all current settings in a stty-readable form
       -F, --file=DEVICE
              open and use the specified DEVICE instead of stdin
       --help display this help and exit
       --version
              output version information and exit
       Optional - before SETTING indicates negation.   An  *  marks  non-POSIX
       settings.  The underlying system defines which settings are available.
   Special characters:
       * dsusp CHAR
              CHAR will send a terminal stop signal once input flushed
       eof CHAR
              CHAR will send an end of file (terminate the input)
       eol CHAR
              CHAR will end the line
       * eol2 CHAR
              alternate CHAR for ending the line
       erase CHAR
              CHAR will erase the last character typed
       intr CHAR
              CHAR will send an interrupt signal
       kill CHAR
              CHAR will erase the current line
       * lnext CHAR
              CHAR will enter the next character quoted
       quit CHAR
              CHAR will send a quit signal
       * rprnt CHAR
              CHAR will redraw the current line
       start CHAR
              CHAR will restart the output after stopping it
       stop CHAR
              CHAR will stop the output
       susp CHAR
              CHAR will send a terminal stop signal
       * swtch CHAR
              CHAR will switch to a different shell layer
       * werase CHAR
              CHAR will erase the last word typed
   Special settings:
       N      set the input and output speeds to N bauds
       * cols N
              tell the kernel that the terminal has N columns
       * columns N
              same as cols N
       ispeed N
              set the input speed to N
       * line N
              use line discipline N
       min N  with -icanon, set N characters minimum for a completed read
       ospeed N
              set the output speed to N
       * rows N
              tell the kernel that the terminal has N rows
       * size print the number of rows and columns according to the kernel
       speed  print the terminal speed
       time N with -icanon, set read timeout of N tenths of a second
   Control settings:
       [-]clocal
              disable modem control signals
       [-]cread
              allow input to be received
       * [-]crtscts
              enable RTS/CTS handshaking
       * [-]cdtrdsr
              enable DTR/DSR handshaking
       csN    set character size to N bits, N in [5..8]
       [-]cstopb
              use two stop bits per character (one with '-')
       [-]hup send a hangup signal when the last process closes the tty
       [-]hupcl
              same as [-]hup
       [-]parenb
              generate parity bit in output and expect parity bit in input
       [-]parodd
              set odd parity (or even parity with '-')
       * [-]cmspar
              use "stick" (mark/space) parity
   Input settings:
       [-]brkint
              breaks cause an interrupt signal
       [-]icrnl
              translate carriage return to newline
       [-]ignbrk
              ignore break characters
       [-]igncr
              ignore carriage return
       [-]ignpar
              ignore characters with parity errors
       * [-]imaxbel
              beep and do not flush a full input buffer on a character
       [-]inlcr
              translate newline to carriage return
       [-]inpck
              enable input parity checking
       [-]istrip
              clear high (8th) bit of input characters
       * [-]iutf8
              assume input characters are UTF-8 encoded
       * [-]iuclc
              translate uppercase characters to lowercase
       * [-]ixany
              let any character restart output, not only start character
       [-]ixoff
              enable sending of start/stop characters
       [-]ixon
              enable XON/XOFF flow control
       [-]parmrk
              mark parity errors (with a 255-0-character sequence)
       [-]tandem
              same as [-]ixoff
   Output settings:
       * bsN  backspace delay style, N in [0..1]
       * crN  carriage return delay style, N in [0..3]
       * ffN  form feed delay style, N in [0..1]
       * nlN  newline delay style, N in [0..1]
       * [-]ocrnl
              translate carriage return to newline
       * [-]ofdel
              use delete characters for fill instead of null characters
       * [-]ofill
              use fill (padding) characters instead of timing for delays
       * [-]olcuc
              translate lowercase characters to uppercase
       * [-]onlcr
              translate newline to carriage return-newline
       * [-]onlret
              newline performs a carriage return
       * [-]onocr
              do not print carriage returns in the first column
       [-]opost
              postprocess output
       * tabN horizontal tab delay style, N in [0..3]
       * tabs same as tab0
       * -tabs
              same as tab3
       * vtN  vertical tab delay style, N in [0..1]
   Local settings:
       [-]crterase
              echo erase characters as backspace-space-backspace
       * crtkill
              kill all line by obeying the echoprt and echoe settings
       * -crtkill
              kill all line by obeying the echoctl and echok settings
       * [-]ctlecho
              echo control characters in hat notation ('^c')
       [-]echo
              echo input characters
       * [-]echoctl
              same as [-]ctlecho
       [-]echoe
              same as [-]crterase
       [-]echok
              echo a newline after a kill character
       * [-]echoke
              same as [-]crtkill
       [-]echonl
              echo newline even if not echoing other characters
       * [-]echoprt
              echo erased characters backward, between '\' and '/'
       [-]icanon
              enable erase, kill, werase, and rprnt special characters
       [-]iexten
              enable non-POSIX special characters
       [-]isig
              enable interrupt, quit, and suspend special characters
       [-]noflsh
              disable flushing after interrupt and quit special characters
       * [-]prterase
              same as [-]echoprt
       * [-]tostop
              stop background jobs that try to write to the terminal
       * [-]xcase
              with icanon, escape with '\' for uppercase characters
   Combination settings:
       * [-]LCASE
              same as [-]lcase
       cbreak same as -icanon
       -cbreak
              same as icanon
       cooked same  as  brkint ignpar istrip icrnl ixon opost isig icanon, eof
              and eol characters to their default values
       -cooked
              same as raw
       crt    same as echoe echoctl echoke
       dec    same as echoe echoctl echoke -ixany intr ^c erase 0177 kill ^u
       * [-]decctlq
              same as [-]ixany
       ek     erase and kill characters to their default values
       evenp  same as parenb -parodd cs7
       -evenp same as -parenb cs8
       * [-]lcase
              same as xcase iuclc olcuc
       litout same as -parenb -istrip -opost cs8
       -litout
              same as parenb istrip opost cs7
       nl     same as -icrnl -onlcr
       -nl    same as icrnl -inlcr -igncr onlcr -ocrnl -onlret
       oddp   same as parenb parodd cs7
       -oddp  same as -parenb cs8
       [-]parity
              same as [-]evenp
       pass8  same as -parenb -istrip cs8
       -pass8 same as parenb istrip cs7
       raw    same as -ignbrk -brkint -ignpar -parmrk  -inpck  -istrip  -inlcr
              -igncr  -icrnl   -ixon   -ixoff   -iuclc  -ixany -imaxbel -opost
              -isig -icanon -xcase min 1 time 0
       -raw   same as cooked
       sane   same as cread -ignbrk brkint -inlcr -igncr icrnl  -iutf8  -ixoff
              -iuclc  -ixany  imaxbel opost -olcuc -ocrnl onlcr -onocr -onlret
              -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon  iexten  echo
              echoe  echok  -echonl  -noflsh  -xcase  -tostop -echoprt echoctl
              echoke, all special characters to their default values
       Handle the tty line connected to standard  input.   Without  arguments,
       prints  baud  rate, line discipline, and deviations from stty sane.  In
       settings, CHAR is taken literally, or coded as in  ^c,  0x37,  0177  or
       127; special values ^- or undef used to disable special characters.
       GNU  coreutils  online  help:  <http://www.gnu.org/software/coreutils/>;
       Report stty translation bugs to <http://translationproject.org/team/>;
AUTHOR
       Written by David MacKenzie.
COPYRIGHT
       Copyright (C) 2013 Free Software Foundation, Inc.  License GPLv3+:  GNU
       GPL version 3 or later <http://gnu.org/licenses/gpl.html>;.
       This  is  free  software:  you  are free to change and redistribute it.
       There is NO WARRANTY, to the extent permitted by law.
SEE ALSO
       The full documentation for stty is maintained as a Texinfo manual.   If
       the  info  and  stty  programs are properly installed at your site, the
       command
              info coreutils 'stty invocation'
       should give you access to the complete manual.

GNU coreutils 8.22               November 2020                         STTY(1)