SCREEN(1) General Commands Manual SCREEN(1)
NAME
screen - screen manager with VT100/ANSI terminal emulation
SYNOPSIS
screen [ -options ] [ cmd [ args ] ]
screen -r [[pid.]tty[.host]]
screen -r sessionowner/[[pid.]tty[.host]]
DESCRIPTION
Screen is a full-screen window manager that multiplexes a physical ter-
minal between several processes (typically interactive shells). Each
virtual terminal provides the functions of a DEC VT100 terminal and, in
addition, several control functions from the ISO 6429 (ECMA 48, ANSI
X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
multiple character sets). There is a scrollback history buffer for
each virtual terminal and a copy-and-paste mechanism that allows moving
text regions between windows.
When screen is called, it creates a single window with a shell in it
(or the specified command) and then gets out of your way so that you
can use the program as you normally would. Then, at any time, you can
create new (full-screen) windows with other programs in them (including
more shells), kill existing windows, view a list of windows, turn out-
put logging on and off, copy-and-paste text between windows, view the
scrollback history, switch between windows in whatever manner you wish,
etc. All windows run their programs completely independent of each
other. Programs continue to run when their window is currently not vis-
ible and even when the whole screen session is detached from the user's
terminal. When a program terminates, screen (per default) kills the
window that contained it. If this window was in the foreground, the
display switches to the previous window; if none are left, screen
exits. Shells usually distinguish between running as login-shell or
sub-shell. Screen runs them as sub-shells, unless told otherwise (See
"shell" .screenrc command).
Everything you type is sent to the program running in the current win-
dow. The only exception to this is the one keystroke that is used to
initiate a command to the window manager. By default, each command
begins with a control-a (abbreviated C-a from now on), and is followed
by one other keystroke. The command character and all the key bindings
can be fully customized to be anything you like, though they are always
two characters in length.
Screen does not understand the prefix "C-" to mean control, although
this notation is used in this manual for readability. Please use the
caret notation ("^A" instead of "C-a") as arguments to e.g. the escape
command or the -e option. Screen will also print out control charac-
ters in caret notation.
The standard way to create a new window is to type "C-a c". This cre-
ates a new window running a shell and switches to that window immedi-
ately, regardless of the state of the process running in the current
window. Similarly, you can create a new window with a custom command
in it by first binding the command to a keystroke (in your .screenrc
file or at the "C-a :" command line) and then using it just like the
"C-a c" command. In addition, new windows can be created by running a
command like:
screen emacs prog.c
from a shell prompt within a previously created window. This will not
run another copy of screen, but will instead supply the command name
and its arguments to the window manager (specified in the $STY environ-
ment variable) who will use it to create the new window. The above
example would start the emacs editor (editing prog.c) and switch to its
window. - Note that you cannot transport environment variables from the
invoking shell to the application (emacs in this case), because it is
forked from the parent screen process, not from the invoking shell.
If "/etc/utmp" is writable by screen, an appropriate record will be
written to this file for each window, and removed when the window is
terminated. This is useful for working with "talk", "script", "shut-
down", "rsend", "sccs" and other similar programs that use the utmp
file to determine who you are. As long as screen is active on your ter-
minal, the terminal's own record is removed from the utmp file. See
also "C-a L".
GETTING STARTED
Before you begin to use screen you'll need to make sure you have cor-
rectly selected your terminal type, just as you would for any other
termcap/terminfo program. (You can do this by using tset for example.)
If you're impatient and want to get started without doing a lot more
reading, you should remember this one command: "C-a ?". Typing these
two characters will display a list of the available screen commands and
their bindings. Each keystroke is discussed in the section "DEFAULT KEY
BINDINGS". The manual section "CUSTOMIZATION" deals with the contents
of your .screenrc.
If your terminal is a "true" auto-margin terminal (it doesn't allow the
last position on the screen to be updated without scrolling the screen)
consider using a version of your terminal's termcap that has automatic
margins turned off. This will ensure an accurate and optimal update of
the screen in all circumstances. Most terminals nowadays have "magic"
margins (automatic margins plus usable last column). This is the VT100
style type and perfectly suited for screen. If all you've got is a
"true" auto-margin terminal screen will be content to use it, but
updating a character put into the last position on the screen may not
be possible until the screen scrolls or the character is moved into a
safe position in some other way. This delay can be shortened by using a
terminal with insert-character capability.
COMMAND-LINE OPTIONS
Screen has the following command-line options:
-a include all capabilities (with some minor exceptions) in each win-
dow's termcap, even if screen must redraw parts of the display in
order to implement a function.
-A Adapt the sizes of all windows to the size of the current termi-
nal. By default, screen tries to restore its old window sizes
when attaching to resizable terminals (those with "WS" in its
description, e.g. suncmd or some xterm).
-c file
override the default configuration file from "$HOME/.screenrc" to
file.
-d|-D [pid.tty.host]
does not start screen, but detaches the elsewhere running screen
session. It has the same effect as typing "C-a d" from screen's
controlling terminal. -D is the equivalent to the power detach
key. If no session can be detached, this option is ignored. In
combination with the -r/-R option more powerful effects can be
achieved:
-d -r Reattach a session and if necessary detach it first.
-d -R Reattach a session and if necessary detach or even create it
first.
-d -RR Reattach a session and if necessary detach or create it. Use
the first session if more than one session is available.
-D -r Reattach a session. If necessary detach and logout remotely
first.
-D -R Attach here and now. In detail this means: If a session is run-
ning, then reattach. If necessary detach and logout remotely
first. If it was not running create it and notify the user.
This is the author's favorite.
-D -RR Attach here and now. Whatever that means, just do it.
Note: It is always a good idea to check the status of your ses-
sions by means of "screen -list".
-e xy
specifies the command character to be x and the character generat-
ing a literal command character to y (when typed after the command
character). The default is "C-a" and `a', which can be specified
as "-e^Aa". When creating a screen session, this option sets the
default command character. In a multiuser session all users added
will start off with this command character. But when attaching to
an already running session, this option changes only the command
character of the attaching user. This option is equivalent to
either the commands "defescape" or "escape" respectively.
-f, -fn, and -fa
turns flow-control on, off, or "automatic switching mode". This
can also be defined through the "defflow" .screenrc command.
-h num
Specifies the history scrollback buffer to be num lines high.
-i will cause the interrupt key (usually C-c) to interrupt the dis-
play immediately when flow-control is on. See the "defflow"
.screenrc command for details. The use of this option is discour-
aged.
-l and -ln
turns login mode on or off (for /etc/utmp updating). This can
also be defined through the "deflogin" .screenrc command.
-ls [match]
-list [match]
does not start screen, but prints a list of pid.tty.host strings
identifying your screen sessions. Sessions marked `detached' can
be resumed with "screen -r". Those marked `attached' are running
and have a controlling terminal. If the session runs in multiuser
mode, it is marked `multi'. Sessions marked as `unreachable'
either live on a different host or are `dead'. An unreachable
session is considered dead, when its name matches either the name
of the local host, or the specified parameter, if any. See the -r
flag for a description how to construct matches. Sessions marked
as `dead' should be thoroughly checked and removed. Ask your sys-
tem administrator if you are not sure. Remove sessions with the
-wipe option.
-L tells screen to turn on automatic output logging for the windows.
-Logfile file
By default logfile name is "screenlog.0". You can set new logfile
name with the "-Logfile" option.
-m causes screen to ignore the $STY environment variable. With
"screen -m" creation of a new session is enforced, regardless
whether screen is called from within another screen session or
not. This flag has a special meaning in connection with the `-d'
option:
-d -m Start screen in "detached" mode. This creates a new session but
doesn't attach to it. This is useful for system startup
scripts.
-D -m This also starts screen in "detached" mode, but doesn't fork a
new process. The command exits if the session terminates.
-O selects a more optimal output mode for your terminal rather than
true VT100 emulation (only affects auto-margin terminals without
`LP'). This can also be set in your .screenrc by specifying `OP'
in a "termcap" command.
-p number_or_name|-|=|+
Preselect a window. This is useful when you want to reattach to a
specific window or you want to send a command via the "-X" option
to a specific window. As with screen's select command, "-" selects
the blank window. As a special case for reattach, "=" brings up
the windowlist on the blank window, while a "+" will create a new
window. The command will not be executed if the specified window
could not be found.
-q Suppress printing of error messages. In combination with "-ls" the
exit value is as follows: 9 indicates a directory without ses-
sions. 10 indicates a directory with running but not attachable
sessions. 11 (or more) indicates 1 (or more) usable sessions. In
combination with "-r" the exit value is as follows: 10 indicates
that there is no session to resume. 12 (or more) indicates that
there are 2 (or more) sessions to resume and you should specify
which one to choose. In all other cases "-q" has no effect.
-Q Some commands now can be queried from a remote session using this
flag, e.g. "screen -Q windows". The commands will send the
response to the stdout of the querying process. If there was an
error in the command, then the querying process will exit with a
non-zero status.
The commands that can be queried now are:
echo
info
lastmsg
number
select
time
title
windows
-r [pid.tty.host]
-r sessionowner/[pid.tty.host]
resumes a detached screen session. No other options (except com-
binations with -d/-D) may be specified, though an optional prefix
of [pid.]tty.host may be needed to distinguish between multiple
detached screen sessions. The second form is used to connect to
another user's screen session which runs in multiuser mode. This
indicates that screen should look for sessions in another user's
directory. This requires setuid-root.
-R resumes screen only when it's unambiguous which one to attach,
usually when only one screen is detached. Otherwise lists avail-
able sessions. -RR attempts to resume the first detached screen
session it finds. If successful, all other command-line options
are ignored. If no detached session exists, starts a new session
using the specified options, just as if -R had not been specified.
The option is set by default if screen is run as a login-shell
(actually screen uses "-xRR" in that case). For combinations with
the -d/-D option see there.
-s program
sets the default shell to the program specified, instead of the
value in the environment variable $SHELL (or "/bin/sh" if not
defined). This can also be defined through the "shell" .screenrc
command. See also there.
-S sessionname
When creating a new session, this option can be used to specify a
meaningful name for the session. This name identifies the session
for "screen -list" and "screen -r" actions. It substitutes the
default [tty.host] suffix.
-t name
sets the title (a.k.a.) for the default shell or specified pro-
gram. See also the "shelltitle" .screenrc command.
-T term
Set the $TERM environment variable using the specified term as
opposed to the default setting of screen.
-U Run screen in UTF-8 mode. This option tells screen that your ter-
minal sends and understands UTF-8 encoded characters. It also sets
the default encoding for new windows to `utf8'.
-v Print version number.
-wipe [match]
does the same as "screen -ls", but removes destroyed sessions
instead of marking them as `dead'. An unreachable session is con-
sidered dead, when its name matches either the name of the local
host, or the explicitly given parameter, if any. See the -r flag
for a description how to construct matches.
-x Attach to a not detached screen session. (Multi display mode).
Screen refuses to attach from within itself. But when cascading
multiple screens, loops are not detected; take care.
-X Send the specified command to a running screen session. You may
use the -S option to specify the screen session if you have sev-
eral screen sessions running. You can use the -d or -r option to
tell screen to look only for attached or detached screen sessions.
Note that this command doesn't work if the session is password
protected.
-4 Resolve hostnames only to IPv4 addresses.
-6 Resolve hostnames only to IPv6 addresses.
DEFAULT KEY BINDINGS
As mentioned, each screen command consists of a "C-a" followed by one
other character. For your convenience, all commands that are bound to
lower-case letters are also bound to their control character counter-
parts (with the exception of "C-a a"; see below), thus, "C-a c" as well
as "C-a C-c" can be used to create a window. See section "CUSTOMIZA-
TION" for a description of the command.
The following table shows the default key bindings. The trailiing com-
mas in boxes with multiple keystroke entries are separators, not part
of the bindings.
+-----------------+-----------------+---------------------+
|C-a ' | (select) | Prompt for a window |
| | | name or number to |
| | | switch to. |
+-----------------+-----------------+---------------------+
|C-a " | (windowlist -b) | Present a list of |
| | | all windows for |
| | | selection. |
+-----------------+-----------------+---------------------+
|C-a digit | (select 0-9) | Switch to window |
| | | number 0 - 9 |
+-----------------+-----------------+---------------------+
|C-a - | (select -) | Switch to window |
| | | number 0 - 9, or to |
| | | the blank window. |
+-----------------+-----------------+---------------------+
|C-a tab | (focus) | Switch the input |
| | | focus to the next |
| | | region. See also |
| | | split, remove, |
| | | only. |
+-----------------+-----------------+---------------------+
|C-a C-a | (other) | Toggle to the win- |
| | | dow displayed pre- |
| | | viously. Note that |
| | | this binding |
| | | defaults to the |
| | | command character |
| | | typed twice, unless |
| | | overridden. For |
| | | instance, if you |
| | | use the option |
| | | "-e]x", this com- |
| | | mand becomes "]]". |
+-----------------+-----------------+---------------------+
|C-a a | (meta) | Send the command |
| | | character (C-a) to |
| | | window. See escape |
| | | command. |
+-----------------+-----------------+---------------------+
|C-a A | (title) | Allow the user to |
| | | enter a name for |
| | | the current window. |
+-----------------+-----------------+---------------------+
|C-a b, | (break) | Send a break to |
|C-a C-b | | window. |
+-----------------+-----------------+---------------------+
|C-a B | (pow_break) | Reopen the terminal |
| | | line and send a |
| | | break. |
+-----------------+-----------------+---------------------+
|C-a c, | (screen) | Create a new window |
|C-a C-c | | with a shell and |
| | | switch to that win- |
| | | dow. |
+-----------------+-----------------+---------------------+
|C-a C | (clear) | Clear the screen. |
+-----------------+-----------------+---------------------+
|C-a d, | (detach) | Detach screen from |
|C-a C-d | | this terminal. |
+-----------------+-----------------+---------------------+
|C-a D D | (pow_detach) | Detach and logout. |
+-----------------+-----------------+---------------------+
|C-a f, | (flow) | Toggle flow on, off |
|C-a C-f | | or auto. |
+-----------------+-----------------+---------------------+
|C-a F | (fit) | Resize the window |
| | | to the current |
| | | region size. |
+-----------------+-----------------+---------------------+
|C-a C-g | (vbell) | Toggles screen's |
| | | visual bell mode. |
+-----------------+-----------------+---------------------+
|C-a h | (hardcopy) | Write a hardcopy of |
| | | the current window |
| | | to the file "hard- |
| | | copy.n". |
+-----------------+-----------------+---------------------+
|C-a H | (log) | Begins/ends logging |
| | | of the current win- |
| | | dow to the file |
| | | "screenlog.n". |
+-----------------+-----------------+---------------------+
|C-a i, | (info) | Show info about |
|C-a C-i | | this window. |
+-----------------+-----------------+---------------------+
|C-a k, | (kill) | Destroy current |
|C-a C-k | | window. |
+-----------------+-----------------+---------------------+
|C-a l, | (redisplay) | Fully refresh cur- |
|C-a C-l | | rent window. |
+-----------------+-----------------+---------------------+
|C-a L | (login) | Toggle this windows |
| | | login slot. Avail- |
| | | able only if screen |
| | | is configured to |
| | | update the utmp |
| | | database. T{ C-a |
| | | m, |
| | | C-a C-m |
+-----------------+-----------------+---------------------+
|C-a M | (monitor) | Toggles monitoring |
| | | of the current win- |
| | | dow. |
+-----------------+-----------------+---------------------+
|C-a space, | (next) | Switch to the next |
|C-a n, | | window. |
|C-a C-n | | |
+-----------------+-----------------+---------------------+
|C-a N | (number) | Show the number |
| | | (and title) of the |
| | | current window. |
+-----------------+-----------------+---------------------+
|C-a backspace, | (prev) | Switch to the pre- |
|C-a C-h, | | vious window (oppo- |
|C-a p, | | site of C-a n). |
|C-a C-p | | |
+-----------------+-----------------+---------------------+
|C-a q, | (xon) | Send a control-q to |
|C-a C-q | | the current window. |
+-----------------+-----------------+---------------------+
|C-a Q | (only) | Delete all regions |
| | | but the current |
| | | one. See also |
| | | split, remove, |
| | | focus. |
+-----------------+-----------------+---------------------+
|C-a r, | (wrap) | Toggle the current |
|C-a C-r | | window's line-wrap |
| | | setting (turn the |
| | | current window's |
| | | automatic margins |
| | | on and off). |
+-----------------+-----------------+---------------------+
|C-a s, | (xoff) | Send a control-s to |
|C-a C-s; | | the current window. |
+-----------------+-----------------+---------------------+
|C-a S | (split) | Split the current |
| | | region horizontally |
| | | into two new ones. |
| | | See also only, |
| | | remove, focus. |
+-----------------+-----------------+---------------------+
|C-a t, | (time) | Show system infor- |
|C-a C-t | | mation. |
+-----------------+-----------------+---------------------+
|C-a v | (version) | Display the version |
| | | and compilation |
| | | date. |
+-----------------+-----------------+---------------------+
|C-a C-v | (digraph) | Enter digraph. |
+-----------------+-----------------+---------------------+
|C-a w, | (windows) | Show a list of win- |
|C-a C-w | | dow. |
+-----------------+-----------------+---------------------+
|C-a W | (width) | Toggle 80/132 col- |
| | | umns. |
+-----------------+-----------------+---------------------+
|C-a x or C-a C-x | (lockscreen) | Lock this terminal. |
+-----------------+-----------------+---------------------+
|C-a X | (remove) | Kill the current |
| | | region. See also |
| | | split, only, focus. |
+-----------------+-----------------+---------------------+
|C-a z, | (suspend) | Suspend screen. |
|C-a C-z | | Your system must |
| | | support BSD-style |
| | | job-control. |
+-----------------+-----------------+---------------------+
|C-a Z | (reset) | Reset the virtual |
| | | terminal to its |
| | | "power-on" values. |
+-----------------+-----------------+---------------------+
|C-a . | (dumptermcap) | Write out a ".term- |
| | | cap" file. |
+-----------------+-----------------+---------------------+
|C-a ? | (help) | Show key bindings. |
+-----------------+-----------------+---------------------+
|C-a \ | (quit) | Kill all windows |
| | | and terminate |
| | | screen. |
+-----------------+-----------------+---------------------+
|C-a : | (colon) | Enter command line |
| | | mode. |
+-----------------+-----------------+---------------------+
|C-a [, | (copy) | Enter copy/scroll- |
|C-a C-[, | | back mode. |
|C-a esc | | |
+-----------------+-----------------+---------------------+
|C-a C-], | (paste .) | Write the contents |
|C-a ] | | of the paste buffer |
| | | to the stdin queue |
| | | of the current win- |
| | | dow. |
+-----------------+-----------------+---------------------+
|C-a {, | (history) | Copy and paste a |
|C-a } | | previous (command) |
| | | line. |
+-----------------+-----------------+---------------------+
|C-a > | (writebuf) | Write paste buffer |
| | | to a file. |
+-----------------+-----------------+---------------------+
|C-a < | (readbuf) | Reads the screen- |
| | | exchange file into |
| | | the paste buffer. |
+-----------------+-----------------+---------------------+
|C-a = | (removebuf) | Removes the file |
| | | used by C-a < and |
| | | C-a >. |
+-----------------+-----------------+---------------------+
|C-a , | (license) | Shows where screen |
| | | comes from, where |
| | | it went to and why |
| | | you can use it. |
+-----------------+-----------------+---------------------+
|C-a _ | (silence) | Start/stop monitor- |
| | | ing the current |
| | | window for inactiv- |
| | | ity. |
+-----------------+-----------------+---------------------+
|C-a | | (split -v) | Split the current |
| | | region vertically |
| | | into two new ones. |
+-----------------+-----------------+---------------------+
|C-a * | (displays) | Show a listing of |
| | | all currently |
| | | attached displays. |
+-----------------+-----------------+---------------------+
CUSTOMIZATION
The "socket directory" defaults either to $HOME/.screen or simply to
/tmp/screens or preferably to /usr/local/screens chosen at compile-
time. If screen is installed setuid-root, then the administrator should
compile screen with an adequate (not NFS mounted) socket directory. If
screen is not running setuid-root, the user can specify any mode 700
directory in the environment variable $SCREENDIR.
When screen is invoked, it executes initialization commands from the
files "/etc/screenrc" and ".screenrc" in the user's home directory.
These are the "programmer's defaults" that can be overridden in the
following ways: for the global screenrc file screen searches for the
environment variable $SYSSCREENRC (this override feature may be dis-
abled at compile-time). The user specific screenrc file is searched in
$SCREENRC, then $HOME/.screenrc. The command line option -c takes
precedence over the above user screenrc files.
Commands in these files are used to set options, bind functions to
keys, and to automatically establish one or more windows at the begin-
ning of your screen session. Commands are listed one per line, with
empty lines being ignored. A command's arguments are separated by tabs
or spaces, and may be surrounded by single or double quotes. A `#'
turns the rest of the line into a comment, except in quotes. Unintel-
ligible lines are warned about and ignored. Commands may contain ref-
erences to environment variables. The syntax is the shell-like "$VAR "
or "${VAR}". Note that this causes incompatibility with previous screen
versions, as now the '$'-character has to be protected with '\' if no
variable substitution shall be performed. A string in single-quotes is
also protected from variable substitution.
Two configuration files are shipped as examples with your screen dis-
tribution: "etc/screenrc" and "etc/etcscreenrc". They contain a number
of useful examples for various commands.
Customization can also be done 'on-line'. To enter the command mode
type `C-a :'. Note that commands starting with "def" change default
values, while others change current settings.
The following commands are available:
acladd usernames [crypted-pw]
addacl usernames
Enable users to fully access this screen session. Usernames can be one
user or a comma separated list of users. This command enables to attach
to the screen session and performs the equivalent of `aclchg usernames
+rwx "#?"'. executed. To add a user with restricted access, use the
`aclchg' command below. If an optional second parameter is supplied,
it should be a crypted password for the named user(s). `Addacl' is a
synonym to `acladd'. Multi user mode only.
aclchg usernames permbits list
chacl usernames permbits list
Change permissions for a comma separated list of users. Permission bits
are represented as `r', `w' and `x'. Prefixing `+' grants the permis-
sion, `-' removes it. The third parameter is a comma separated list of
commands and/or windows (specified either by number or title). The spe-
cial list `#' refers to all windows, `?' to all commands. if usernames
consists of a single `*', all known users are affected.
A command can be executed when the user has the `x' bit for it. The
user can type input to a window when he has its `w' bit set and no
other user obtains a writelock for this window. Other bits are cur-
rently ignored. To withdraw the writelock from another user in window
2: `aclchg username -w+w 2'. To allow read-only access to the session:
`aclchg username -w "#"'. As soon as a user's name is known to screen
he can attach to the session and (per default) has full permissions for
all command and windows. Execution permission for the acl commands,
`at' and others should also be removed or the user may be able to
regain write permission. Rights of the special username nobody cannot
be changed (see the "su" command). `Chacl' is a synonym to `aclchg'.
Multi user mode only.
acldel username
Remove a user from screen's access control list. If currently attached,
all the user's displays are detached from the session. He cannot attach
again. Multi user mode only.
aclgrp username [groupname]
Creates groups of users that share common access rights. The name of
the group is the username of the group leader. Each member of the group
inherits the permissions that are granted to the group leader. That
means, if a user fails an access check, another check is made for the
group leader. A user is removed from all groups the special value
"none" is used for groupname. If the second parameter is omitted all
groups the user is in are listed.
aclumask [[ users ] +bits | [ users ] -bits... ]
umask [[ users ] +bits | [ users ] -bits... ]
This specifies the access other users have to windows that will be cre-
ated by the caller of the command. Users may be no, one or a comma
separated list of known usernames. If no users are specified, a list of
all currently known users is assumed. Bits is any combination of
access control bits allowed defined with the "aclchg" command. The spe-
cial username "?" predefines the access that not yet known users will
be granted to any window initially. The special username "??" prede-
fines the access that not yet known users are granted to any command.
Rights of the special username nobody cannot be changed (see the "su"
command). `Umask' is a synonym to `aclumask'.
activity message
When any activity occurs in a background window that is being moni-
tored, screen displays a notification in the message line. The notifi-
cation message can be re-defined by means of the "activity" command.
Each occurrence of `%' in message is replaced by the number of the win-
dow in which activity has occurred, and each occurrence of `^G' is
replaced by the definition for bell in your termcap (usually an audible
bell). The default message is
'Activity in window %n'
Note that monitoring is off for all windows by default, but can be
altered by use of the "monitor" command (C-a M).
allpartial on|off
If set to on, only the current cursor line is refreshed on window
change. This affects all windows and is useful for slow terminal
lines. The previous setting of full/partial refresh for each window is
restored with "allpartial off". This is a global flag that immediately
takes effect on all windows overriding the "partial" settings. It does
not change the default redraw behavior of newly created windows.
altscreen on|off
If set to on, "alternate screen" support is enabled in virtual termi-
nals, just like in xterm. Initial setting is `off'.
at [identifier][#|*|%] command [args ]
Execute a command at other displays or windows as if it had been
entered there. "At" changes the context (the `current window' or `cur-
rent display' setting) of the command. If the first parameter describes
a non-unique context, the command will be executed multiple times. If
the first parameter is of the form `identifier*' then identifier is
matched against user names. The command is executed once for each dis-
play of the selected user(s). If the first parameter is of the form
`identifier%' identifier is matched against displays. Displays are
named after the ttys they attach. The prefix `/dev/' or `/dev/tty' may
be omitted from the identifier. If identifier has a `#' or nothing
appended it is matched against window numbers and titles. Omitting an
identifier in front of the `#', `*' or `%'-character selects all users,
displays or windows because a prefix-match is performed. Note that on
the affected display(s) a short message will describe what happened.
Permission is checked for initiator of the "at" command, not for the
owners of the affected display(s). Note that the '#' character works
as a comment introducer when it is preceded by whitespace. This can be
escaped by prefixing a '\'. Permission is checked for the initiator of
the "at" command, not for the owners of the affected display(s).
Caveat: When matching against windows, the command is executed at least
once per window. Commands that change the internal arrangement of win-
dows (like "other") may be called again. In shared windows the command
will be repeated for each attached display. Beware, when issuing toggle
commands like "login"! Some commands (e.g. "process") require that a
display is associated with the target windows. These commands may not
work correctly under "at" looping over windows.
attrcolor attrib [attribute/color-modifier]
This command can be used to highlight attributes by changing the color
of the text. If the attribute attrib is in use, the specified
attribute/color modifier is also applied. If no modifier is given, the
current one is deleted. See the "STRING ESCAPES" chapter for the syntax
of the modifier. Screen understands two pseudo-attributes, "i" stands
for high-intensity foreground color and "I" for high-intensity back-
ground color.
Examples:
attrcolor b "R"
Change the color to bright red if bold text is to be printed.
attrcolor u "-u b"
Use blue text instead of underline.
attrcolor b ".I"
Use bright colors for bold text. Most terminal emulators do this
already.
attrcolor i "+b"
Make bright colored text also bold.
autodetach on|off
Sets whether screen will automatically detach upon hangup, which saves
all your running programs until they are resumed with a screen -r com-
mand. When turned off, a hangup signal will terminate screen and all
the processes it contains. Autodetach is on by default.
autonuke on|off
Sets whether a clear screen sequence should nuke all the output that
has not been written to the terminal. See also "obuflimit".
backtick id lifespan autorefresh cmd args
backtick id
Program the backtick command with the numerical id id. The output of
such a command is used for substitution of the "%`" string escape. The
specified lifespan is the number of seconds the output is considered
valid. After this time, the command is run again if a corresponding
string escape is encountered. The autorefresh parameter triggers an
automatic refresh for caption and hardstatus strings after the speci-
fied number of seconds. Only the last line of output is used for sub-
stitution.
If both the lifespan and the autorefresh parameters are zero, the back-
tick program is expected to stay in the background and generate output
once in a while. In this case, the command is executed right away and
screen stores the last line of output. If a new line gets printed
screen will automatically refresh the hardstatus or the captions.
The second form of the command deletes the backtick command with the
numerical id id.
bce [on|off]
Change background-color-erase setting. If "bce" is set to on, all char-
acters cleared by an erase/insert/scroll/clear operation will be dis-
played in the current background color. Otherwise the default back-
ground color is used.
bell_msg [message]
When a bell character is sent to a background window, screen displays a
notification in the message line. The notification message can be re-
defined by this command. Each occurrence of `%' in message is replaced
by the number of the window to which a bell has been sent, and each
occurrence of `^G' is replaced by the definition for bell in your term-
cap (usually an audible bell). The default message is
'Bell in window %n'
An empty message can be supplied to the "bell_msg" command to suppress
output of a message line (bell_msg ""). Without parameter, the current
message is shown.
bind [class] key [command [args]]
Bind a command to a key. By default, most of the commands provided by
screen are bound to one or more keys as indicated in the "DEFAULT KEY
BINDINGS" section, e.g. the command to create a new window is bound to
"C-c" and "c". The "bind" command can be used to redefine the key
bindings and to define new bindings. The key argument is either a sin-
gle character, a two-character sequence of the form "^x" (meaning "C-
x"), a backslash followed by an octal number (specifying the ASCII code
of the character), or a backslash followed by a second character, such
as "\^" or "\\". The argument can also be quoted, if you like. If no
further argument is given, any previously established binding for this
key is removed. The command argument can be any command listed in this
section.
If a command class is specified via the "-c" option, the key is bound
for the specified class. Use the "command" command to activate a class.
Command classes can be used to create multiple command keys or multi-
character bindings.
Some examples:
bind ' ' windows
bind ^k
bind k
bind K kill
bind ^f screen telnet foobar
bind \033 screen -ln -t root -h 1000 9 su
would bind the space key to the command that displays a list of windows
(so that the command usually invoked by "C-a C-w" would also be avail-
able as "C-a space"). The next three lines remove the default kill
binding from "C-a C-k" and "C-a k". "C-a K" is then bound to the kill
command. Then it binds "C-f" to the command "create a window with a
TELNET connection to foobar", and bind "escape" to the command that
creates an non-login window with a.k.a. "root" in slot #9, with a supe-
ruser shell and a scrollback buffer of 1000 lines.
bind -c demo1 0 select 10
bind -c demo1 1 select 11
bind -c demo1 2 select 12
bindkey "^B" command -c demo1
makes "C-b 0" select window 10, "C-b 1" window 11, etc.
bind -c demo2 0 select 10
bind -c demo2 1 select 11
bind -c demo2 2 select 12
bind - command -c demo2
makes "C-a - 0" select window 10, "C-a - 1" window 11, etc.
bindkey [-d] [-m] [-a] [[-k|-t] string [cmd-args]]
This command manages screen's input translation tables. Every entry in
one of the tables tells screen how to react if a certain sequence of
characters is encountered. There are three tables: one that should con-
tain actions programmed by the user, one for the default actions used
for terminal emulation and one for screen's copy mode to do cursor
movement. See section "INPUT TRANSLATION" for a list of default key
bindings.
If the -d option is given, bindkey modifies the default table, -m
changes the copy mode table and with neither option the user table is
selected. The argument string is the sequence of characters to which
an action is bound. This can either be a fixed string or a termcap key-
board capability name (selectable with the -k option).
Some keys on a VT100 terminal can send a different string if applica-
tion mode is turned on (e.g the cursor keys). Such keys have two
entries in the translation table. You can select the application mode
entry by specifying the -a option.
The -t option tells screen not to do inter-character timing. One cannot
turn off the timing if a termcap capability is used.
Cmd can be any of screen's commands with an arbitrary number of args.
If cmd is omitted the key-binding is removed from the table.
Here are some examples of keyboard bindings:
bindkey -d
Show all of the default key bindings. The application mode entries are
marked with [A].
bindkey -k k1 select 1
Make the "F1" key switch to window one.
bindkey -t foo stuff barfoo
Make "foo" an abbreviation of the word "barfoo". Timeout is disabled so
that users can type slowly.
bindkey "\024" mapdefault
This key-binding makes "^T" an escape character for key-bindings. If
you did the above "stuff barfoo" binding, you can enter the word "foo"
by typing "^Tfoo". If you want to insert a "^T" you have to press the
key twice (i.e., escape the escape binding).
bindkey -k F1 command
Make the F11 (not F1!) key an alternative screen escape (besides ^A).
break[duration]
Send a break signal for duration*0.25 seconds to this window. For non-
Posix systems the time interval may be rounded up to full seconds.
Most useful if a character device is attached to the window rather than
a shell process (See also chapter "WINDOW TYPES"). The maximum duration
of a break signal is limited to 15 seconds.
blanker
Activate the screen blanker. First the screen is cleared. If no blanker
program is defined, the cursor is turned off, otherwise, the program is
started and it's output is written to the screen. The screen blanker
is killed with the first keypress, the read key is discarded.
This command is normally used together with the "idle" command.
blankerprg [program-args]
Defines a blanker program. Disables the blanker program if an empty
argument is given. Shows the currently set blanker program if no argu-
ments are given.
breaktype [tcsendbreak|TIOCSBRK|TCSBRK]
Choose one of the available methods of generating a break signal for
terminal devices. This command should affect the current window only.
But it still behaves identical to "defbreaktype". This will be changed
in the future. Calling "breaktype" with no parameter displays the
break method for the current window.
bufferfile [exchange-file]
Change the filename used for reading and writing with the paste buffer.
If the optional argument to the "bufferfile" command is omitted, the
default setting ("/tmp/screen-exchange") is reactivated. The following
example will paste the system's password file into the screen window
(using the paste buffer, where a copy remains):
C-a : bufferfile /etc/passwd
C-a < C-a ]
C-a : bufferfile
bumpleft
Swaps window with previous one on window list.
bumpright
Swaps window with next one on window list.
c1 [on|off]
Change c1 code processing. "C1 on" tells screen to treat the input
characters between 128 and 159 as control functions. Such an 8-bit
code is normally the same as ESC followed by the corresponding 7-bit
code. The default setting is to process c1 codes and can be changed
with the "defc1" command. Users with fonts that have usable characters
in the c1 positions may want to turn this off.
caption [ top | bottom ] always|splitonly[string]
caption string [string]
This command controls the display of the window captions. Normally a
caption is only used if more than one window is shown on the display
(split screen mode). But if the type is set to always screen shows a
caption even if only one window is displayed. The default is splitonly.
The second form changes the text used for the caption. You can use all
escapes from the "STRING ESCAPES" chapter. Screen uses a default of
`%3n %t'.
You can mix both forms by providing a string as an additional argument.
You can have the caption displayed either at the top or bottom of the
window. The default is bottom.
charset set
Change the current character set slot designation and charset mapping.
The first four character of set are treated as charset designators
while the fifth and sixth character must be in range '0' to '3' and set
the GL/GR charset mapping. On every position a '.' may be used to indi-
cate that the corresponding charset/mapping should not be changed (set
is padded to six characters internally by appending '.' chars). New
windows have "BBBB02" as default charset, unless a "encoding" command
is active.
The current setting can be viewed with the "info" command.
chdir [directory]
Change the current directory of screen to the specified directory or,
if called without an argument, to your home directory (the value of the
environment variable $HOME). All windows that are created by means of
the "screen" command from within ".screenrc" or by means of "C-a :
screen " or "C-a c" use this as their default directory. Without a
chdir command, this would be the directory from which screen was
invoked.
Hardcopy and log files are always written to the window's default
directory, not the current directory of the process running in the win-
dow. You can use this command multiple times in your .screenrc to
start various windows in different default directories, but the last
chdir value will affect all the windows you create interactively.
cjkwidth [ on | off ]
Treat ambiguous width characters as full/half width.
clear
Clears the current window and saves its image to the scrollback buffer.
collapse
Reorders window on window list, removing number gaps between them.
colon [prefix]
Allows you to enter ".screenrc" command lines. Useful for on-the-fly
modification of key bindings, specific window creation and changing
settings. Note that the "set" keyword no longer exists! Usually com-
mands affect the current window rather than default settings for future
windows. Change defaults with commands starting with 'def'.
If you consider this as the `Ex command mode' of screen, you may regard
"C-a esc" (copy mode) as its `Vi command mode'.
command [-c class]
This command has the same effect as typing the screen escape character
(^A). It is probably only useful for key bindings. If the "-c" option
is given, select the specified command class. See also "bind" and
"bindkey".
compacthist [on|off]
This tells screen whether to suppress trailing blank lines when
scrolling up text into the history buffer.
console [on|off]
Grabs or un-grabs the machines console output to a window. Note: Only
the owner of /dev/console can grab the console output. This command is
only available if the machine supports the ioctl TIOCCONS.
copy
Enter copy/scrollback mode. This allows you to copy text from the cur-
rent window and its history into the paste buffer. In this mode a vi-
like `full screen editor' is active:
The editor's movement keys are:
+-------------+--------------------------------------------------+
|h, C-h, | move the cursor left. |
|left arrow | |
+-------------+--------------------------------------------------+
|j, C-n, | move the cursor down. |
|down arrow | |
+-------------+--------------------------------------------------+
|k, C-p, | move the cursor up. |
|up arrow | |
+-------------+--------------------------------------------------+
|l ('el'), | move the cursor right. |
|right arrow | |
+-------------+--------------------------------------------------+
|0 (zero) C-a | move to the leftmost column. |
+-------------+--------------------------------------------------+
|+ and - | positions one line up and down. |
+-------------+--------------------------------------------------+
|H, M and L | move the cursor to the leftmost column of the |
| | top, center or bottom line of the window. |
+-------------+--------------------------------------------------+
|| | moves to the specified absolute column. |
+-------------+--------------------------------------------------+
|g or home | moves to the beginning of the buffer. |
+-------------+--------------------------------------------------+
|G or end | moves to the specified absolute line (default: |
| | end of buffer). |
+-------------+--------------------------------------------------+
|% | jumps to the specified percentage of the buffer. |
+-------------+--------------------------------------------------+
|^ or $ | move to the leftmost column, to the first or |
| | last non-whitespace character on the line. |
+-------------+--------------------------------------------------+
|w, b, and e | move the cursor word by word. |
+-------------+--------------------------------------------------+
|B, E | move the cursor WORD by WORD (as in vi). |
+-------------+--------------------------------------------------+
|f/F, t/T | move the cursor forward/backward to the next |
| | occurence of the target. (eg, '3fy' will move |
| | the cursor to the 3rd 'y' to the right.) |
+-------------+--------------------------------------------------+
|; and , | Repeat the last f/F/t/T command in the |
| | same/opposite direction. |
+-------------+--------------------------------------------------+
|C-e and C-y | scroll the display up/down by one line while |
| | preserving the cursor position. |
+-------------+--------------------------------------------------+
|C-u and C-d | scroll the display up/down by the specified |
| | amount of lines while preserving the cursor |
| | position. (Default: half screen-full). |
+-------------+--------------------------------------------------+
|C-b and C-f | scroll the display up/down a full screen. |
+-------------+--------------------------------------------------+
Note: Emacs style movement keys can be customized by a .screenrc com-
mand. (E.g. markkeys "h=^B:l=^F:$=^E") There is no simple method for a
full emacs-style keymap, as this involves multi-character codes.
Some keys are defined to do mark and replace operations.
The copy range is specified by setting two marks. The text between
these marks will be highlighted. Press:
space or enter to set the first or second mark respectively. If
mousetrack is set to `on', marks can also be set using left
mouse click.
Y and y used to mark one whole line or to mark from start of
line.
W marks exactly one word.
Any of these commands can be prefixed with a repeat count number by
pressing digits
0..9 which is taken as a repeat count.
Example: "C-a C-[ H 10 j 5 Y" will copy lines 11 to 15 into the paste
buffer.
The folllowing search keys are defined:
/ Vi-like search forward.
? Vi-like search backward.
C-a s Emacs style incremental search forward.
C-r Emacs style reverse i-search.
n Find next search pattern.
N Find previous search pattern.
There are however some keys that act differently than in vi. Vi does
not allow one to yank rectangular blocks of text, but screen does.
Press: c or C to set the left or right margin respectively. If no
repeat count is given, both default to the current cursor position.
Example: Try this on a rather full text screen:
"C-a [ M 20 l SPACE c 10 l 5 j C SPACE".
This moves one to the middle line of the screen, moves in 20 columns
left, marks the beginning of the paste buffer, sets the left column,
moves 5 columns down, sets the right column, and then marks the end of
the paste buffer. Now try:
"C-a [ M 20 l SPACE 10 l 5 j SPACE"
and notice the difference in the amount of text copied.
J joins lines. It toggles between 4 modes: lines separated by a newline
character (012), lines glued seamless, lines separated by a single
whitespace and comma separated lines. Note that you can prepend the
newline character with a carriage return character, by issuing a "crlf
on".
v or V is for all the vi users with ":set numbers" - it toggles the
left margin between column 9 and 1. Press
a before the final space key to toggle in append mode. Thus the con-
tents of the paste buffer will not be overwritten, but is appended to.
A toggles in append mode and sets a (second) mark.
> sets the (second) mark and writes the contents of the paste buffer to
the screen-exchange file (/tmp/screen-exchange per default) once copy-
mode is finished.
This example demonstrates how to dump the whole scrollback buffer to
that file: "C-A [ g SPACE G $ >".
C-g gives information about the current line and column.
x or o exchanges the first mark and the current cursor position. You
can use this to adjust an already placed mark.
C-l ('el') will redraw the screen.
@ does nothing. Does not even exit copy mode.
All keys not described here exit copy mode.
copy_reg [key]
No longer exists, use "readreg" instead.
crlf [on|off]
This affects the copying of text regions with the `C-a [' command. If
it is set to `on', lines will be separated by the two character
sequence `CR' - `LF'. Otherwise (default) only `LF' is used. When no
parameter is given, the state is toggled.
debug on|off
Turns runtime debugging on or off. If screen has been compiled with
option -DDEBUG debugging available and is turned on per default. Note
that this command only affects debugging output from the main "SCREEN"
process correctly. Debug output from attacher processes can only be
turned off once and forever.
defc1 on|off
Same as the c1 command except that the default setting for new windows
is changed. Initial setting is `on'.
defautonuke on|off
Same as the autonuke command except that the default setting for new
displays is changed. Initial setting is `off'. Note that you can use
the special `AN' terminal capability if you want to have a dependency
on the terminal type.
defbce on|off
Same as the bce command except that the default setting for new windows
is changed. Initial setting is `off'.
defbreaktype [tcsendbreak|TIOCSBRK|TCSBRK]
Choose one of the available methods of generating a break signal for
terminal devices. The preferred methods are tcsendbreak and TIOCSBRK.
The third, TCSBRK, blocks the complete screen session for the duration
of the break, but it may be the only way to generate long breaks.
Tcsendbreak and TIOCSBRK may or may not produce long breaks with spikes
(e.g. 4 per second). This is not only system-dependent, this also dif-
fers between serial board drivers. Calling "defbreaktype" with no
parameter displays the current setting.
defcharset [set]
Like the charset command except that the default setting for new win-
dows is changed. Shows current default if called without argument.
defdynamictitle on|off
Set default behaviour for new windows regarding if screen should change
window title when seeing proper escape sequence. See also "TITLES (nam-
ing windows)" section.
defescape xy
Set the default command characters. This is equivalent to the "escape"
except that it is useful multiuser sessions only. In a multiuser ses-
sion "escape" changes the command character of the calling user, where
"defescape" changes the default command characters for users that will
be added later.
defflow on|off|auto [interrupt]
Same as the flow command except that the default setting for new win-
dows is changed. Initial setting is `auto'. Specifying "defflow auto
interrupt" is the same as the command-line options -fa and -i.
defgr on|off
Same as the gr command except that the default setting for new windows
is changed. Initial setting is `off'.
defhstatus [status]
The hardstatus line that all new windows will get is set to status.
This command is useful to make the hardstatus of every window display
the window number or title or the like. Status may contain the same
directives as in the window messages, but the directive escape charac-
ter is '^E' (octal 005) instead of '%'. This was done to make a misin-
terpretation of program generated hardstatus lines impossible. If the
parameter status is omitted, the current default string is displayed.
Per default the hardstatus line of new windows is empty.
defencoding enc
Same as the encoding command except that the default setting for new
windows is changed. Initial setting is the encoding taken from the ter-
minal.
deflog on|off
Same as the log command except that the default setting for new windows
is changed. Initial setting is `off'.
deflogin on|off
Same as the login command except that the default setting for new win-
dows is changed. This is initialized with `on' as distributed (see con-
fig.h.in).
defmode mode
The mode of each newly allocated pseudo-tty is set to mode. Mode is an
octal number. When no "defmode" command is given, mode 0622 is used.
defmonitor on|off
Same as the monitor command except that the default setting for new
windows is changed. Initial setting is `off'.
defmousetrack on|off
Same as the mousetrack command except that the default setting for new
windows is changed. Initial setting is `off'.
defnonblock on|off|numsecs
Same as the nonblock command except that the default setting for dis-
plays is changed. Initial setting is `off'.
defobuflimit limit
Same as the obuflimit command except that the default setting for new
displays is changed. Initial setting is 256 bytes. Note that you can
use the special 'OL' terminal capability if you want to have a depen-
dency on the terminal type.
defscrollback num
Same as the scrollback command except that the default setting for new
windows is changed. Initial setting is 100.
defshell command
Synonym to the shell .screenrc command. See there.
defsilence on|off
Same as the silence command except that the default setting for new
windows is changed. Initial setting is `off'.
defslowpaste msec
Same as the slowpaste command except that the default setting for new
windows is changed. Initial setting is 0 milliseconds, meaning `off'.
defutf8 on|off
Same as the utf8 command except that the default setting for new win-
dows is changed. Initial setting is `on' if screen was started with
"-U", otherwise `off'.
defwrap on|off
Same as the wrap command except that the default setting for new win-
dows is changed. Initially line-wrap is on and can be toggled with the
"wrap" command ("C-a r") or by means of "C-a : wrap on|off".
defwritelock on|off|auto
Same as the writelock command except that the default setting for new
windows is changed. Initially writelocks will off.
detach [-h]
Detach the screen session (disconnect it from the terminal and put it
into the background). This returns you to the shell where you invoked
screen. A detached screen can be resumed by invoking screen with the
-r option (see also section "COMMAND-LINE OPTIONS"). The -h option
tells screen to immediately close the connection to the terminal
("hangup").
dinfo
Show what screen thinks about your terminal. Useful if you want to know
why features like color or the alternate charset don't work.
displays
Shows a tabular listing of all currently connected user front-ends
(displays). This is most useful for multiuser sessions. The following
keys can be used in displays list:
+----------------------+--------------------------------+
|k, C-p, or up | Move up one line. |
+----------------------+--------------------------------+
|j, C-n, or down | Move down one line. |
+----------------------+--------------------------------+
|C-a or home | Move to the first line. |
+----------------------+--------------------------------+
|C-e or end | Move to the last line. |
+----------------------+--------------------------------+
|C-u or C-d | Move one half page up or down. |
+----------------------+--------------------------------+
|C-b or C-f | Move one full page up or down. |
+----------------------+--------------------------------+
|mouseclick | Move to the selected line. |
| | Available when "mousetrack" is |
| | set to on. |
+----------------------+--------------------------------+
|space | Refresh the list |
+----------------------+--------------------------------+
|d | Detach that display |
+----------------------+--------------------------------+
|D | Power detach that display |
+----------------------+--------------------------------+
|C-g, enter, or escape | Exit the list |
+----------------------+--------------------------------+
The following is an example of what "displays" could look like:
xterm 80x42 jnweiger@/dev/ttyp4 0(m11) &rWx
facit 80x24 mlschroe@/dev/ttyhf nb 11(tcsh) rwx
xterm 80x42 jnhollma@/dev/ttyp5 0(m11) &R.x
(A) (B) (C) (D) (E) (F)(G) (H)(I)
The legend is as follows:
(A) The terminal type known by screen for this display.
(B) Displays geometry as width x height.
(C) Username who is logged in at the display.
(D) Device name of the display or the attached device
(E) Display is in blocking or nonblocking mode. The available modes
are "nb", "NB", "Z<", "Z>", and "BL".
(F) Number of the window
(G) Name/title of window
(H) Whether the window is shared
(I) Window permissions. Made up of three characters:
(1st character)
`-' : no read
`r' : read
`R' : read only due to foreign wlock
(2nd character)
`-' : no write
`.' : write suppressed by foreign wlock
`w' : write
`W' : own wlock
(3rd character)
`-' : no execute
`x' : execute
"Displays" needs a region size of at least 10 characters
wide and 5 characters high in order to display.
digraph [preset[unicode-value]]
This command prompts the user for a digraph sequence. The next
two characters typed are looked up in a builtin table and the
resulting character is inserted in the input stream. For exam-
ple, if the user enters 'a"', an a-umlaut will be inserted. If
the first character entered is a 0 (zero), screen will treat the
following characters (up to three) as an octal number instead.
The optional argument preset is treated as user input, thus one
can create an "umlaut" key. For example the command "bindkey ^K
digraph '"'" enables the user to generate an a-umlaut by typing
CTRL-K a. When a non-zero unicode-value is specified, a new
digraph is created with the specified preset. The digraph is
unset if a zero value is provided for the unicode-value.
dumptermcap
Write the termcap entry for the virtual terminal optimized for
the currently active window to the file ".termcap" in the user's
"$HOME/.screen" directory (or wherever screen stores its sock-
ets. See the "FILES" section below). This termcap entry is
identical to the value of the environment variable $TERMCAP that
is set up by screen for each window. For terminfo based systems
you will need to run a converter like captoinfo and then compile
the entry with tic.
dynamictitle on|off
Change behaviour for windows regarding if screen should change
window title when seeing proper escape sequence. See also
"TITLES (naming windows)" section.
echo [-n] message
The echo command may be used to annoy screen users with a 'mes-
sage of the day'. Typically installed in a global /etc/screenrc.
The option "-n" may be used to suppress the line feed. See also
"sleep". Echo is also useful for online checking of environment
variables.
encoding enc [enc]
Tell screen how to interpret the input/output. The first argu-
ment sets the encoding of the current window. Each window can
emulate a different encoding. The optional second parameter
overwrites the encoding of the connected terminal. It should
never be needed as screen uses the locale setting to detect the
encoding. There is also a way to select a terminal encoding
depending on the terminal type by using the "KJ" termcap entry.
Supported encodings are eucJP, SJIS, eucKR, eucCN, Big5, GBK,
KOI8-R, KOI8-U, CP1251, UTF-8, ISO8859-2, ISO8859-3, ISO8859-4,
ISO8859-5, ISO8859-6, ISO8859-7, ISO8859-8, ISO8859-9,
ISO8859-10, ISO8859-15, jis.
See also "defencoding", which changes the default setting of a
new window.
escape xy
Set the command character to x and the character generating a
literal command character (by triggering the "meta" command) to
y (similar to the -e option). Each argument is either a single
character, a two-character sequence of the form "^x" (meaning
"C-x"), a backslash followed by an octal number (specifying the
ASCII code of the character), or a backslash followed by a sec-
ond character, such as "\^" or "\\". The default is "^Aa".
eval command1[command2 ]
Parses and executes each argument as separate command.
exec [[fdpat]newcommand [args ]]
Run a unix subprocess (specified by an executable path newcom-
mand and its optional arguments) in the current window. The flow
of data between newcommands stdin/stdout/stderr, the process
originally started in the window (let us call it "application-
process") and screen itself (window) is controlled by the file
descriptor pattern fdpat. This pattern is basically a three
character sequence representing stdin, stdout and stderr of new-
command. A dot (.) connects the file descriptor to screen. An
exclamation mark (!) causes the file descriptor to be connected
to the application-process. A colon (:) combines both. User
input will go to newcommand unless newcommand receives the
application-process' output (fdpats first character is `!' or
`:') or a pipe symbol (|) is added (as a fourth character) to
the end of fdpat.
Invoking `exec' without arguments shows name and arguments of
the currently running subprocess in this window. Only one sub-
process a time can be running in each window.
When a subprocess is running the `kill' command will affect it
instead of the windows process.
Refer to the postscript file `doc/fdpat.ps' for a confusing
illustration of all 21 possible combinations. Each drawing shows
the digits 2,1,0 representing the three file descriptors of new-
command. The box marked `W' is the usual pty that has the appli-
cation-process on its slave side. The box marked `P' is the
secondary pty that now has screen at its master side.
Abbreviations: Whitespace between the word `exec' and fdpat and
the command can be omitted. Trailing dots and a fdpat consisting
only of dots can be omitted. A simple `|' is synonymous for the
pattern `!..|'; the word exec can be omitted here and can always
be replaced by `!'.
Examples:
exec /bin/sh
exec /bin/sh
!/bin/sh
Creates another shell in the same window, while
the original shell is still running. Output of
both shells is displayed and user input is sent to
the new /bin/sh.
exec !.. stty 19200
exec ! stty 19200
!!stty 19200
Set the speed of the window's tty. If your stty
command operates on stdout, then add another `!'.
exec !..| less
|less
This adds a pager to the window output. The spe-
cial character `|' is needed to give the user con-
trol over the pager although it gets its input
from the window's process. This works, because
less listens on stderr (a behavior that screen
would not expect without the `|') when its stdin
is not a tty. Less versions newer than 177 fail
miserably here; good old pg still works.
!:sed -n s/.*Error.*/\007/p
Sends window output to both, the user and the sed
command. The sed inserts an additional bell char-
acter (oct. 007) to the window output seen by
screen. This will cause "Bell in window x" mes-
sages, whenever the string "Error" appears in the
window.
fit
Change the window size to the size of the current region. This
command is needed because screen doesn't adapt the window size
automatically if the window is displayed more than once.
flow [on|off|auto]
Sets the flow-control mode for this window. Without parameters
it cycles the current window's flow-control setting from "auto-
matic" to "on" to "off". See the discussion on "FLOW-CONTROL"
later on in this document for full details and note, that this
is subject to change in future releases. Default is set by
`defflow'.
focus [next|prev|up|down|left|right|top|bottom]
Move the input focus to the next region. This is done in a
cyclic way so that the top left region is selected after the
bottom right one. If no option is given it defaults to `next'.
The next region to be selected is determined by how the regions
are layered. Normally, the next region in the same layer would
be selected. However, if that next region contains one or more
layers, the first region in the highest layer is selected first.
If you are at the last region of the current layer, `next' will
move the focus to the next region in the lower layer (if there
is a lower layer). `Prev' cycles in the opposite order. See
"split" for more information about layers.
The rest of the options (`up', `down', `left', `right', `top',
and `bottom') are more indifferent to layers. The option `up'
will move the focus upward to the region that is touching the
upper left corner of the current region. `Down' will move down-
ward to the region that is touching the lower left corner of the
current region. The option `left' will move the focus leftward
to the region that is touching the upper left corner of the cur-
rent region, while `right' will move rightward to the region
that is touching the upper right corner of the current region.
Moving left from a left most region or moving right from a right
most region will result in no action.
The option `top' will move the focus to the very first region in
the upper list corner of the screen, and `bottom' will move to
the region in the bottom right corner of the screen. Moving up
from a top most region or moving down from a bottom most region
will result in no action.
Useful bindings are (h, j, k, and l as in vi)
bind h focus left
bind j focus down
bind k focus up
bind l focus right
bind t focus top
bind b focus bottom
Note that k is traditionally bound to the kill command.
focusminsize [ ( width|max|_ ) ( height|max|_ ) ]
This forces any currently selected region to be automatically
resized at least a certain width and height. All other surround-
ing regions will be resized in order to accommodate. This con-
straint follows everytime the "focus" command is used. The
"resize" command can be used to increase either dimension of a
region, but never below what is set with "focusminsize". The
underscore `_' is a synonym for max. Setting a width and height
of `0 0' (zero zero) will undo any constraints and allow for
manual resizing. Without any parameters, the minimum width and
height is shown.
gr [on|off]
Turn GR charset switching on/off. Whenever screen sees an input
character with the 8th bit set, it will use the charset stored
in the GR slot and print the character with the 8th bit
stripped. The default (see also "defgr") is not to process GR
switching because otherwise the ISO88591 charset would not work.
group [grouptitle]
Change or show the group the current window belongs to. Windows
can be moved around between different groups by specifying the
name of the destination group. Without specifying a group, the
title of the current group is displayed.
hardcopy [-h] [file]
Writes out the currently displayed image to the file file, or,
if no filename is specified, to hardcopy.n in the default direc-
tory, where n is the number of the current window. This either
appends or overwrites the file if it exists. See below. If the
option -h is specified, dump also the contents of the scrollback
buffer.
hardcopy_append on|off
If set to "on", screen will append to the "hardcopy.n" files
created by the command "C-a h", otherwise these files are over-
written each time. Default is `off'.
hardcopydir directory
Defines a directory where hardcopy files will be placed. If
unset, hardcopys are dumped in screen's current working direc-
tory.
hardstatus [on|off]
hardstatus [always]firstline|lastline|message|ignore[string]
hardstatus string[string]
This command configures the use and emulation of the terminal's
hardstatus line. The first form toggles whether screen will use
the hardware status line to display messages. If the flag is set
to `off', these messages are overlaid in reverse video mode at
the display line. The default setting is `on'.
The second form tells screen what to do if the terminal doesn't
have a hardstatus line (i.e. the termcap/terminfo capabilities
"hs", "ts", "fs" and "ds" are not set). When "firstline/last-
line" is used, screen will reserve the first/last line of the
display for the hardstatus. "message" uses screen's message
mechanism and "ignore" tells screen never to display the hard-
status. If you prepend the word "always" to the type (e.g.,
"alwayslastline"), screen will use the type even if the terminal
supports a hardstatus.
The third form specifies the contents of the hardstatus line.
'%h' is used as default string, i.e., the stored hardstatus of
the current window (settable via "ESC]0;<string>^G" or
"ESC_<string>ESC\") is displayed. You can customize this to any
string you like including the escapes from the "STRING ESCAPES"
chapter. If you leave out the argument string, the current
string is displayed.
You can mix the second and third form by providing the string as
additional argument.
height [-w|-d] [lines [cols]]
Set the display height to a specified number of lines. When no
argument is given it toggles between 24 and 42 lines display.
You can also specify a width if you want to change both values.
The -w option tells screen to leave the display size unchanged
and just set the window size, -d vice versa.
help[class]
Not really a online help, but displays a help screen showing you
all the key bindings. The first pages list all the internal
commands followed by their current bindings. Subsequent pages
will display the custom commands, one command per key. Press
space when you're done reading each page, or return to exit
early. All other characters are ignored. If the "-c" option is
given, display all bound commands for the specified command
class. See also "DEFAULT KEY BINDINGS" section.
history
Usually users work with a shell that allows easy access to pre-
vious commands. For example csh has the command "!!" to repeat
the last command executed. Screen allows you to have a primi-
tive way of re-calling "the command that started ": You just
type the first letter of that command, then hit `C-a {' and
screen tries to find a previous line that matches with the
`prompt character' to the left of the cursor. This line is
pasted into this window's input queue. Thus you have a crude
command history (made up by the visible window and its scroll-
back buffer).
hstatus status
Change the window's hardstatus line to the string status.
idle [timeout[cmd-args]]
Sets a command that is run after the specified number of seconds
inactivity is reached. This command will normally be the
"blanker" command to create a screen blanker, but it can be any
screen command. If no command is specified, only the timeout is
set. A timeout of zero (or the special timeout off) disables the
timer. If no arguments are given, the current settings are dis-
played.
ignorecase [on|off]
Tell screen to ignore the case of characters in searches.
Default is `off'. Without any options, the state of ignorecase
is toggled.
info
Uses the message line to display some information about the cur-
rent window: the cursor position in the form "(column,row)"
starting with "(1,1)", the terminal width and height plus the
size of the scrollback buffer in lines, like in "(80,24)+50",
the current state of window XON/XOFF flow control is shown like
this (See also section FLOW CONTROL):
+flow automatic flow control, currently on.
-flow automatic flow control, currently off.
+(+)flow flow control enabled. Agrees with automatic control.
-(+)flow flow control disabled. Disagrees with automatic control.
+(-)flow flow control enabled. Disagrees with automatic control.
-(-)flow flow control disabled. Agrees with automatic control.
The current line wrap setting (`+wrap' indicates enabled,
`-wrap' not) is also shown. The flags `ins', `org', `app',
`log', `mon' or `nored' are displayed when the window is in
insert mode, origin mode, application-keypad mode, has output
logging, activity monitoring or partial redraw enabled.
The currently active character set (G0, G1, G2, or G3) and in
square brackets the terminal character sets that are currently
designated as G0 through G3 is shown. If the window is in UTF-8
mode, the string "UTF-8" is shown instead.
Additional modes depending on the type of the window are dis-
played at the end of the status line (See also chapter "WINDOW
TYPES").
If the state machine of the terminal emulator is in a non-
default state, the info line is started with a string identify-
ing the current state.
For system information use the "time" command.
ins_reg [key]
No longer exists, use "paste" instead.
kill
Kill current window.
If there is an `exec' command running then it is killed. Other-
wise the process (shell) running in the window receives a HANGUP
condition, the window structure is removed and screen (your dis-
play) switches to another window. When the last window is
destroyed, screen exits. After a kill screen switches to the
previously displayed window.
Note: Emacs users should keep this command in mind, when killing
a line. It is recommended not to use "C-a" as the screen escape
key or to rebind kill to "C-a K".
lastmsg
Redisplay the last contents of the message/status line. Useful
if you're typing when a message appears, because the message
goes away when you press a key (unless your terminal has a hard-
ware status line). Refer to the commands "msgwait" and "msgmin-
wait" for fine tuning.
layout new [title]
Create a new layout. The screen will change to one whole region
and be switched to the blank window. From here, you build the
regions and the windows they show as you desire. The new layout
will be numbered with the smallest available integer, starting
with zero. You can optionally give a title to your new layout.
Otherwise, it will have a default title of "layout". You can
always change the title later by using the command layout title.
layout remove [n|title]
Remove, or in other words, delete the specified layout. Either
the number or the title can be specified. Without either speci-
fication, screen will remove the current layout.
Removing a layout does not affect your set windows or regions.
layout next
Switch to the next layout available
layout prev
Switch to the previous layout available
layout select [n|title]
Select the desired layout. Either the number or the title can be
specified. Without either specification, screen will prompt and
ask which screen is desired. To see which layouts are available,
use the layout show command.
layout show
List on the message line the number(s) and title(s) of the
available layout(s). The current layout is flagged.
layout title [title]
Change or display the title of the current layout. A string
given will be used to name the layout. Without any options, the
current title and number is displayed on the message line.
layout number [n]
Change or display the number of the current layout. An integer
given will be used to number the layout. Without any options,
the current number and title is displayed on the message line.
layout attach [title|:last]
Change or display which layout to reattach back to. The default
is :last, which tells screen to reattach back to the last used
layout just before detachment. By supplying a title, You can
instruct screen to reattach to a particular layout regardless
which one was used at the time of detachment. Without any
options, the layout to reattach to will be shown in the message
line.
layout save [n|title]
Remember the current arrangement of regions. When used, screen
will remember the arrangement of vertically and horizontally
split regions. This arrangement is restored when a screen ses-
sion is reattached or switched back from a different layout. If
the session ends or the screen process dies, the layout arrange-
ments are lost. The layout dump command should help in this siu-
tation. If a number or title is supplied, screen will remember
the arrangement of that particular layout. Without any options,
screen will remember the current layout.
Saving your regions can be done automatically by using the lay-
out autosave command.
layout autosave [on|off]
Change or display the status of automatcally saving layouts. The
default is on, meaning when screen is detached or changed to a
different layout, the arrangement of regions and windows will be
remembered at the time of change and restored upon return. If
autosave is set to off, that arrangement will only be restored
to either to the last manual save, using layout save, or to when
the layout was first created, to a single region with a single
window. Without either an on or off, the current status is dis-
played on the message line.
layout dump [filename]
Write to a file the order of splits made in the current layout.
This is useful to recreate the order of your regions used in
your current layout. Only the current layout is recorded. While
the order of the regions are recorded, the sizes of those
regions and which windows correspond to which regions are not.
If no filename is specified, the default is layout-dump, saved
in the directory that the screen process was started in. If the
file already exists, layout dump will append to that file. As an
example:
C-a : layout dump /home/user/.screenrc
will save or append the layout to the user's .screenrc file.
license
Display the disclaimer page. This is done whenever screen is
started without options, which should be often enough. See also
the "startup_message" command.
lockscreen
Lock this display. Call a screenlock program (/local/bin/lck or
/usr/bin/lock or a builtin if no other is available). Screen
does not accept any command keys until this program terminates.
Meanwhile processes in the windows may continue, as the windows
are in the `detached' state. The screenlock program may be
changed through the environment variable $LOCKPRG (which must be
set in the shell from which screen is started) and is executed
with the user's uid and gid.
Warning: When you leave other shells unlocked and you have no
password set on screen, the lock is void: One could easily re-
attach from an unlocked shell. This feature should rather be
called `lockterminal'.
log [on|off]
Start/stop writing output of the current window to a file
"screenlog.n" in the window's default directory, where n is the
number of the current window. This filename can be changed with
the `logfile' command. If no parameter is given, the state of
logging is toggled. The session log is appended to the previous
contents of the file if it already exists. The current contents
and the contents of the scrollback history are not included in
the session log. Default is `off'.
logfile filename
logfile flush secs
Defines the name the log files will get. The default is "screen-
log.%n". The second form changes the number of seconds screen
will wait before flushing the logfile buffer to the file-system.
The default value is 10 seconds.
login [on|off]
Adds or removes the entry in the utmp database file for the cur-
rent window. This controls if the window is `logged in'. When
no parameter is given, the login state of the window is toggled.
Additionally to that toggle, it is convenient having a `log in'
and a `log out' key. E.g. `bind I login on' and `bind O login
off' will map these keys to be C-a I and C-a O. The default
setting (in config.h.in) should be "on" for a screen that runs
under suid-root. Use the "deflogin" command to change the
default login state for new windows. Both commands are only
present when screen has been compiled with utmp support.
logtstamp [on|off]
logtstamp after [secs]
logtstamp string
[string]
This command controls logfile time-stamp mechanism of screen.
If time-stamps are turned "on", screen adds a string containing
the current time to the logfile after two minutes of inactivity.
When output continues and more than another two minutes have
passed, a second time-stamp is added to document the restart of
the output. You can change this timeout with the second form of
the command. The third form is used for customizing the time-
stamp string (`-- %n:%t -- time-stamp -- %M/%d/%y %c:%s --\n' by
default).
mapdefault
Tell screen that the next input character should only be looked
up in the default bindkey table. See also "bindkey".
mapnotnext
Like mapdefault, but don't even look in the default bindkey ta-
ble.
maptimeout [timeout]
Set the inter-character timer for input sequence detection to a
timeout of timeout ms. The default timeout is 300ms. Maptimeout
with no arguments shows the current setting. See also "bind-
key".
markkeys string
This is a method of changing the keymap used for copy/history
mode. The string is made up of oldchar=newchar pairs which are
separated by `:'. Example: The string "B=^B:F=^F" will change
the keys `C-b' and `C-f' to the vi style binding (scroll up/down
fill page). This happens to be the default binding for `B' and
`F'. The command "markkeys h=^B:l=^F:$=^E" would set the mode
for an emacs-style binding. If your terminal sends characters,
that cause you to abort copy mode, then this command may help by
binding these characters to do nothing. The no-op character is
`@' and is used like this: "markkeys @=L=H" if you do not want
to use the `H' or `L' commands any longer. As shown in this
example, multiple keys can be assigned to one function in a sin-
gle statement.
maxwin num
Set the maximum window number screen will create. Doesn't affect
already existing windows. The number can be increased only when
there are no existing windows.
meta
Insert the command character (C-a) in the current window's input
stream.
monitor [on|off]
Toggles activity monitoring of windows. When monitoring is
turned on and an affected window is switched into the back-
ground, you will receive the activity notification message in
the status line at the first sign of output and the window will
also be marked with an `@' in the window-status display. Moni-
toring is initially off for all windows.
mousetrack [on|off]
This command determines whether screen will watch for mouse
clicks. When this command is enabled, regions that have been
split in various ways can be selected by pointing to them with a
mouse and left-clicking them. Without specifying on or off, the
current state is displayed. The default state is determined by
the "defmousetrack" command.
msgminwait sec
Defines the time screen delays a new message when one message is
currently displayed. The default is 1 second.
msgwait sec
Defines the time a message is displayed if screen is not dis-
turbed by other activity. The default is 5 seconds.
multiuser on|off
Switch between singleuser and multiuser mode. Standard screen
operation is singleuser. In multiuser mode the commands
`acladd', `aclchg', `aclgrp' and `acldel' can be used to enable
(and disable) other users accessing this screen session.
nethack on|off
Changes the kind of error messages used by screen. When you are
familiar with the game "nethack", you may enjoy the nethack-
style messages which will often blur the facts a little, but are
much funnier to read. Anyway, standard messages often tend to be
unclear as well.
This option is only available if screen was compiled with the
NETHACK flag defined. The default setting is then determined by
the presence of the environment variable $NETHACKOPTIONS and the
file ~/.nethackrc - if either one is present, the default is on.
next
Switch to the next window. This command can be used repeatedly
to cycle through the list of windows.
nonblock
[on|off|numsecs]
Tell screen how to deal with user interfaces (displays) that
cease to accept output. This can happen if a user presses ^S or
a TCP/modem connection gets cut but no hangup is received. If
nonblock is off (this is the default) screen waits until the
display restarts to accept the output. If nonblock is on, screen
waits until the timeout is reached (on is treated as 1s). If the
display still doesn't receive characters, screen will consider
it "blocked" and stop sending characters to it. If at some time
it restarts to accept characters, screen will unblock the dis-
play and redisplay the updated window contents.
number [[+|-]n]
Change the current window's number. If the given number n is
already used by another window, both windows exchange their num-
bers. If no argument is specified, the current window number
(and title) is shown. Using `+' or `-' will change the window's
number by the relative amount specified.
obuflimit [limit]
If the output buffer contains more bytes than the specified
limit, no more data will be read from the windows. The default
value is 256. If you have a fast display (like xterm), you can
set it to some higher value. If no argument is specified, the
current setting is displayed.
only
Kill all regions but the current one.
other
Switch to the window displayed previously. If this window does
no longer exist, other has the same effect as next.
partial on|off
Defines whether the display should be refreshed (as with redis-
play) after switching to the current window. This command only
affects the current window. To immediately affect all windows
use the allpartial command. Default is `off', of course. This
default is fixed, as there is currently no defpartial command.
password [crypted_pw]
Present a crypted password in your ".screenrc" file and screen
will ask for it, whenever someone attempts to resume a detached.
This is useful if you have privileged programs running under
screen and you want to protect your session from reattach
attempts by another user masquerading as your uid (i.e. any
superuser.) If no crypted password is specified, screen prompts
twice for typing a password and places its encryption in the
paste buffer. Default is `none', this disables password check-
ing.
paste [registers [dest_reg]]
Write the (concatenated) contents of the specified registers to
the stdin queue of the current window. The register '.' is
treated as the paste buffer. If no parameter is given the user
is prompted for a single register to paste. The paste buffer
can be filled with the copy, history and readbuf commands.
Other registers can be filled with the register, readreg and
paste commands. If paste is called with a second argument, the
contents of the specified registers is pasted into the named
destination register rather than the window. If '.' is used as
the second argument, the displays paste buffer is the destina-
tion. Note, that "paste" uses a wide variety of resources:
Whenever a second argument is specified no current window is
needed. When the source specification only contains registers
(not the paste buffer) then there need not be a current display
(terminal attached), as the registers are a global resource. The
paste buffer exists once for every user.
pastefont [on|off]
Tell screen to include font information in the paste buffer. The
default is not to do so. This command is especially useful for
multi character fonts like kanji.
pow_break
Reopen the window's terminal line and send a break condition.
See `break'.
pow_detach
Power detach. Mainly the same as detach, but also sends a
HANGUP signal to the parent process of screen. CAUTION: This
will result in a logout, when screen was started from your
login-shell.
pow_detach_msg [message]
The message specified here is output whenever a `Power detach'
was performed. It may be used as a replacement for a logout mes-
sage or to reset baud rate, etc. Without parameter, the current
message is shown.
prev
Switch to the window with the next lower number. This command
can be used repeatedly to cycle through the list of windows.
printcmd [cmd]
If cmd is not an empty string, screen will not use the terminal
capabilities "po/pf" if it detects an ansi print sequence ESC [
5 i, but pipe the output into cmd. This should normally be a
command like "lpr" or "'cat > /tmp/scrprint'". printcmd without
a command displays the current setting. The ansi sequence ESC \
ends printing and closes the pipe.
Warning: Be careful with this command! If other user have write
access to your terminal, they will be able to fire off print
commands.
process [key]
Stuff the contents of the specified register into screen's input
queue. If no argument is given you are prompted for a register
name. The text is parsed as if it had been typed in from the
user's keyboard. This command can be used to bind multiple
actions to a single key.
quit
Kill all windows and terminate screen. Note that on VT100-style
terminals the keys C-4 and C-\ are identical. This makes the
default bindings dangerous: Be careful not to type C-a C-4 when
selecting window no. 4. Use the empty bind command (as in "bind
'^\'") to remove a key binding.
readbuf [encoding] [filename]
Reads the contents of the specified file into the paste buffer.
You can tell screen the encoding of the file via the -e option.
If no file is specified, the screen-exchange filename is used.
See also "bufferfile" command.
readreg [encoding] [register [filename]]
Does one of two things, dependent on number of arguments: with
zero or one arguments it it duplicates the paste buffer contents
into the register specified or entered at the prompt. With two
arguments it reads the contents of the named file into the reg-
ister, just as readbuf reads the screen-exchange file into the
paste buffer. You can tell screen the encoding of the file via
the -e option. The following example will paste the system's
password file into the screen window (using register p, where a
copy remains):
C-a : readreg p /etc/passwd
C-a : paste p
redisplay
Redisplay the current window. Needed to get a full redisplay
when in partial redraw mode.
register [-eencoding]key-string
Save the specified string to the register key. The encoding of
the string can be specified via the -e option. See also the
"paste" command.
remove
Kill the current region. This is a no-op if there is only one
region.
removebuf
Unlinks the screen-exchange file used by the commands "writebuf"
and "readbuf".
rendition bell | monitor | silence | so attr [ color ]
Change the way screen renders the titles of windows that have
monitor or bell flags set in caption or hardstatus or win-
dowlist. See the "STRING ESCAPES" chapter for the syntax of the
modifiers. The default for monitor is currently "=b " (bold,
active colors), for bell "=ub " (underline, bold and active col-
ors), and "=u " for silence.
reset
Reset the virtual terminal to its "power-on" values. Useful when
strange settings (like scroll regions or graphics character set)
are left over from an application.
resize [-h|-v|-b|-l|-p] [[+|-] n[%] |=|max|min|_|0]
Resize the current region. The space will be removed from or
added to the surrounding regions depending on the order of the
splits. The available options for resizing are `-h'(horizon-
tal), `-v'(vertical), `-b'(both), `-l'(local to layer), and
`-p'(perpendicular). Horizontal resizes will add or remove width
to a region, vertical will add or remove height, and both will
add or remove size from both dimensions. Local and perpendicular
are similar to horizontal and vertical, but they take in account
of how a region was split. If a region's last split was hori-
zontal, a local resize will work like a vertical resize. If a
region's last split was vertical, a local resize will work like
a horizontal resize. Perpendicular resizes work in opposite of
local resizes. If no option is specified, local is the default.
The amount of lines to add or remove can be expressed a couple
of different ways. By specifying a number n by itself will
resize the region by that absolute amount. You can specify a
relative amount by prefixing a plus `+' or minus `-' to the
amount, such as adding +n lines or removing -n lines. Resizing
can also be expressed as an absolute or relative percentage by
postfixing a percent sign `%'. Using zero `0' is a synonym for
`min' and using an underscore `_' is a synonym for `max'.
Some examples are:
resize +N
increase current region by N
resize -N
decrease current region by N
resize N
set current region to N
resize 20%
set current region to 20% of original size
resize +20%
increase current region by 20%
resize -b =
make all windows equally
resize max
maximize current region
resize min
minimize current region
Without any arguments, screen will prompt for how you would like
to resize the current region.
See "focusminsize" if you want to restrict the minimun size a
region can have.
screen [-opts] [n] [cmd [args]|//group]
Establish a new window. The flow-control options (-f, -fn and -fa),
title (a.k.a.) option (-t), login options (-l and -ln) , terminal type
option (-T <term>), the all-capability-flag (-a) and scrollback option
(-h <num>) may be specified with each command. The option (-M) turns
monitoring on for this window. The option (-L) turns output logging on
for this window. If an optional number n in the range 0..MAXWIN-1 is
given, the window number n is assigned to the newly created window (or,
if this number is already in-use, the next available number). If a
command is specified after "screen", this command (with the given argu-
ments) is started in the window; otherwise, a shell is created. If
//group is supplied, a container-type window is created in which other
windows may be created inside it.
Thus, if your ".screenrc" contains the lines
# example for .screenrc:
screen 1
screen -fn -t foobar -L 2 telnet foobar
screen creates a shell window (in window #1) and a window with a TELNET
connection to the machine foobar (with no flow-control using the title
"foobar" in window #2) and will write a logfile ("screenlog.2") of the
telnet session. Note, that unlike previous versions of screen no addi-
tional default window is created when "screen" commands are included in
your ".screenrc" file. When the initialization is completed, screen
switches to the last window specified in your .screenrc file or, if
none, opens a default window #0.
Screen has built in some functionality of "cu" and "telnet". See also
chapter "WINDOW TYPES".
scrollback num
Set the size of the scrollback buffer for the current windows to num
lines. The default scrollback is 100 lines. See also the "defscroll-
back" command and use "info" to view the current setting. To access and
use the contents in the scrollback buffer, use the "copy" command.
select [WindowID]
Switch to the window identified by WindowID. This can be a prefix of a
window title (alphanumeric window name) or a window number. The param-
eter is optional and if omitted, you get prompted for an identifier.
When a new window is established, the first available number is
assigned to this window. Thus, the first window can be activated by
"select 0". The number of windows is limited at compile-time by the
MAXWIN configuration parameter (which defaults to 40). There are two
special WindowIDs, "-" selects the internal blank window and "."
selects the current window. The latter is useful if used with screen's
"-X" option.
sessionname [name]
Rename the current session. Note, that for "screen -list" the name
shows up with the process-id prepended. If the argument "name" is omit-
ted, the name of this session is displayed. Caution: The $STY environ-
ment variables will still reflect the old name in pre-existing shells.
This may result in confusion. Use of this command is generally discour-
aged. Use the "-S" command-line option if you want to name a new ses-
sion. The default is constructed from the tty and host names.
setenv [var [string]]
Set the environment variable var to value string. If only var is spec-
ified, the user will be prompted to enter a value. If no parameters
are specified, the user will be prompted for both variable and value.
The environment is inherited by all subsequently forked shells.
setsid [on|off]
Normally screen uses different sessions and process groups for the win-
dows. If setsid is turned off, this is not done anymore and all windows
will be in the same process group as the screen backend process. This
also breaks job-control, so be careful. The default is on, of course.
This command is probably useful only in rare circumstances.
shell command
Set the command to be used to create a new shell. This overrides the
value of the environment variable $SHELL. This is useful if you'd like
to run a tty-enhancer which is expecting to execute the program speci-
fied in $SHELL. If the command begins with a '-' character, the shell
will be started as a login-shell. Typical shells do only minimal ini-
tialization when not started as a login-shell. E.g. Bash will not read
your "~/.bashrc" unless it is a login-shell.
shelltitle title
Set the title for all shells created during startup or by the C-A C-c
command. For details about what a title is, see the discussion enti-
tled "TITLES (naming windows)".
silence [on|off|sec]
Toggles silence monitoring of windows. When silence is turned on and
an affected window is switched into the background, you will receive
the silence notification message in the status line after a specified
period of inactivity (silence). The default timeout can be changed with
the `silencewait' command or by specifying a number of seconds instead
of `on' or `off'. Silence is initially off for all windows.
silencewait sec
Define the time that all windows monitored for silence should wait
before displaying a message. Default 30 seconds.
sleep num
This command will pause the execution of a .screenrc file for num sec-
onds. Keyboard activity will end the sleep. It may be used to give
users a chance to read the messages output by "echo".
slowpaste msec
Define the speed at which text is inserted into the current window by
the paste ("C-a ]") command. If the slowpaste value is nonzero text is
written character by character. screen will make a pause of msec mil-
liseconds after each single character write to allow the application to
process its input. Only use slowpaste if your underlying system exposes
flow control problems while pasting large amounts of text.
sort
Sort the windows in alphabetical order of the window tiles.
source file
Read and execute commands from file file. Source commands may be nested
to a maximum recursion level of ten. If file is not an absolute path
and screen is already processing a source command, the parent directory
of the running source command file is used to search for the new com-
mand file before screen's current directory.
Note that termcap/terminfo/termcapinfo commands only work at startup
and reattach time, so they must be reached via the default screenrc
files to have an effect.
sorendition [attr[color]]
This command is deprecated. See "rendition so" instead.
split[-v]
Split the current region into two new ones. All regions on the display
are resized to make room for the new region. The blank window is dis-
played in the new region. The default is to create a horizontal split,
putting the new regions on the top and bottom of each other. Using `-v'
will create a vertical split, causing the new regions to appear side by
side of each other. Use the "remove" or the "only" command to delete
regions. Use "focus" to toggle between regions.
When a region is split opposite of how it was previously split (that
is, vertical then horizontal or horizontal then vertical), a new layer
is created. The layer is used to group together the regions that are
split the same. Normally, as a user, you should not see nor have to
worry about layers, but they will affect how some commands ("focus" and
"resize") behave.
With this current implementation of screen, scrolling data will appear
much slower in a vertically split region than one that is not. This
should be taken into consideration if you need to use system commands
such as "cat" or "tail -f".
startup_message on|off
Select whether you want to see the copyright notice during startup.
Default is `on', as you probably noticed.
status [top|up|down|bottom]
[left|right]
The status window by default is in bottom-left corner. This command can
move status messages to any corner of the screen. top is the same as
up, down is the same as bottom.
stuff [string]
Stuff the string string in the input buffer of the current window.
This is like the "paste" command but with much less overhead. Without
a parameter, screen will prompt for a string to stuff. You cannot
paste large buffers with the "stuff" command. It is most useful for key
bindings. See also "bindkey".
su [username [password [password2]]]
Substitute the user of a display. The command prompts for all parame-
ters that are omitted. If passwords are specified as parameters, they
have to be specified un-crypted. The first password is matched against
the systems passwd database, the second password is matched against the
screen password as set with the commands "acladd" or "password". "Su"
may be useful for the screen administrator to test multiuser setups.
When the identification fails, the user has access to the commands
available for user nobody. These are "detach", "license", "version",
"help" and "displays".
suspend
Suspend screen. The windows are in the `detached' state, while screen
is suspended. This feature relies on the shell being able to do job
control.
term term
In each window's environment screen opens, the $TERM variable is set to
"screen" by default. But when no description for "screen" is installed
in the local termcap or terminfo data base, you set $TERM to - say -
"vt100". This won't do much harm, as screen is VT100/ANSI compatible.
The use of the "term" command is discouraged for non-default purpose.
That is, one may want to specify special $TERM settings (e.g. vt100)
for the next "screen rlogin othermachine" command. Use the command
"screen -T vt100 rlogin othermachine" rather than setting and resetting
the default.
termcap term terminal-tweaks[window-tweaks]
terminfo term terminal-tweaks[window-tweaks]
termcapinfo term terminal-tweaks[window-tweaks]
Use this command to modify your terminal's termcap entry without going
through all the hassles involved in creating a custom termcap entry.
Plus, you can optionally customize the termcap generated for the win-
dows. You have to place these commands in one of the screenrc startup
files, as they are meaningless once the terminal emulator is booted.
If your system works uses the terminfo database rather than termcap,
screen will understand the `terminfo' command, which has the same
effects as the `termcap' command. Two separate commands are provided,
as there are subtle syntactic differences, e.g. when parameter interpo-
lation (using `%') is required. Note that termcap names of the capabil-
ities have to be used with the `terminfo' command.
In many cases, where the arguments are valid in both terminfo and term-
cap syntax, you can use the command `termcapinfo', which is just a
shorthand for a pair of `termcap' and `terminfo' commands with identi-
cal arguments.
The first argument specifies which terminal(s) should be affected by
this definition. You can specify multiple terminal names by separating
them with `|'s. Use `*' to match all terminals and `vt*' to match all
terminals that begin with "vt".
Each tweak argument contains one or more termcap defines (separated by
`:'s) to be inserted at the start of the appropriate termcap entry,
enhancing it or overriding existing values. The first tweak modifies
your terminal's termcap, and contains definitions that your terminal
uses to perform certain functions. Specify a null string to leave this
unchanged (e.g. ''). The second (optional) tweak modifies all the win-
dow termcaps, and should contain definitions that screen understands
(see the "VIRTUAL TERMINAL" section).
Some examples:
termcap xterm* LP:hs@
Informs screen that all terminals that begin with `xterm' have firm
auto-margins that allow the last position on the screen to be updated
(LP), but they don't really have a status line (no 'hs' - append `@' to
turn entries off). Note that we assume `LP' for all terminal names
that start with "vt", but only if you don't specify a termcap command
for that terminal.
termcap vt* LP
termcap vt102|vt220 Z0=\E[?3h:Z1=\E[?3l
Specifies the firm-margined `LP' capability for all terminals that
begin with `vt', and the second line will also add the escape-sequences
to switch into (Z0) and back out of (Z1) 132-character-per-line mode if
this is a VT102 or VT220. (You must specify Z0 and Z1 in your termcap
to use the width-changing commands.)
termcap vt100 "" l0=PF1:l1=PF2:l2=PF3:l3=PF4
This leaves your vt100 termcap alone and adds the function key labels
to each window's termcap entry.
termcap h19|z19 am@:im=\E@:ei=\EO dc=\E[P
Takes a h19 or z19 termcap and turns off auto-margins (am@) and enables
the insert mode (im) and end-insert (ei) capabilities (the `@' in the
`im' string is after the `=', so it is part of the string). Having the
`im' and `ei' definitions put into your terminal's termcap will cause
screen to automatically advertise the character-insert capability in
each window's termcap. Each window will also get the delete-character
capability (dc) added to its termcap, which screen will translate into
a line-update for the terminal (we're pretending it doesn't support
character deletion).
If you would like to fully specify each window's termcap entry, you
should instead set the $SCREENCAP variable prior to running screen.
See the discussion on the "VIRTUAL TERMINAL" in this manual, and the
termcap(5) man page for more information on termcap definitions.
time [string]
Uses the message line to display the time of day, the host name, and
the load averages over 1, 5, and 15 minutes (if this is available on
your system). For window specific information, use "info".
If a string is specified, it changes the format of the time report like
it is described in the "STRING ESCAPES" chapter. Screen uses a default
of "%c:%s %M %d %H%? %l%?".
title [windowtitle]
Set the name of the current window to windowtitle. If no name is speci-
fied, screen prompts for one. This command was known as `aka' in previ-
ous releases.
truecolor [on|off]
Enables truecolor support. Currently autodetection of truecolor support
cannot be done reliably, as such it's left to user to enable. Default
is off. Known terminals that may support it are: iTerm2, Konsole, st.
Xterm includes support for truecolor escapes but converts them back to
indexed 256 color space.
unbindall
Unbind all the bindings. This can be useful when screen is used solely
for its detaching abilities, such as when letting a console application
run as a daemon. If, for some reason, it is necessary to bind commands
after this, use 'screen -X'.
unsetenv var
Unset an environment variable.
utf8 [on|off[on|off]]
Change the encoding used in the current window. If utf8 is enabled, the
strings sent to the window will be UTF-8 encoded and vice versa. Omit-
ting the parameter toggles the setting. If a second parameter is given,
the display's encoding is also changed (this should rather be done with
screen's "-U" option). See also "defutf8", which changes the default
setting of a new window.
vbell [on|off]
Sets the visual bell setting for this window. Omitting the parameter
toggles the setting. If vbell is switched on, but your terminal does
not support a visual bell, a `vbell-message' is displayed in the status
line when the bell character (^G) is received. Visual bell support of
a terminal is defined by the termcap variable `vb' (terminfo: 'flash').
Per default, vbell is off, thus the audible bell is used. See also
`bell_msg'.
vbell_msg [message]
Sets the visual bell message. message is printed to the status line if
the window receives a bell character (^G), vbell is set to "on", but
the terminal does not support a visual bell. The default message is
"Wuff, Wuff!!". Without a parameter, the current message is shown.
vbellwait sec
Define a delay in seconds after each display of screen's visual bell
message. The default is 1 second.
verbose [on|off]
If verbose is switched on, the command name is echoed, whenever a win-
dow is created (or resurrected from zombie state). Default is off.
Without a parameter, the current setting is shown.
version
Print the current version and the compile date in the status line.
wall message
Write a message to all displays. The message will appear in the termi-
nal's status line.
width [-w|-d] [cols [lines]]
Toggle the window width between 80 and 132 columns or set it to cols
columns if an argument is specified. This requires a capable terminal
and the termcap entries "Z0" and "Z1". See the "termcap" command for
more information. You can also specify a new height if you want to
change both values. The -w option tells screen to leave the display
size unchanged and just set the window size, -d vice versa.
windowlist [-b] [-m] [-g]
windowlist string [string]
windowlist title [title]
Display all windows in a table for visual window selection. If screen
was in a window group, screen will back out of the group and then dis-
play the windows in that group. If the -b option is given, screen will
switch to the blank window before presenting the list, so that the cur-
rent window is also selectable. The -m option changes the order of the
windows, instead of sorting by window numbers screen uses its internal
most-recently-used list. The -g option will show the windows inside
any groups in that level and downwards.
The following keys are used to navigate in "windowlist":
+-----------------+---------------------------------------------------+
|k, C-p, or up | Move up one line. |
+-----------------+---------------------------------------------------+
|j, C-n, or down | Move down one line. |
+-----------------+---------------------------------------------------+
|C-g or escape | Exit windowlist. |
+-----------------+---------------------------------------------------+
|C-a or home | Move to the first line. |
+-----------------+---------------------------------------------------+
|C-e or end | Move to the last line. |
+-----------------+---------------------------------------------------+
|C-u or C-d | Move one half page up or down. |
+-----------------+---------------------------------------------------+
|C-b or C-f | Move one full page up or down. |
+-----------------+---------------------------------------------------+
|0..9 | Using the number keys, move to the selected line. |
+-----------------+---------------------------------------------------+
|mouseclick | Move to the selected line. Available when "mouse- |
| | track" is set to "on" |
+-----------------+---------------------------------------------------+
|/ | Search. |
+-----------------+---------------------------------------------------+
|n | Repeat search in the forward direction. |
+-----------------+---------------------------------------------------+
|N | Repeat search in the backward direction. |
+-----------------+---------------------------------------------------+
|m | Toggle MRU. |
+-----------------+---------------------------------------------------+
|g | Toggle group nesting. |
+-----------------+---------------------------------------------------+
|a | All window view. |
+-----------------+---------------------------------------------------+
|C-h or backspace | Back out the group. |
+-----------------+---------------------------------------------------+
|, | Switch numbers with the previous window. |
+-----------------+---------------------------------------------------+
|. | Switch numbers with the next window. |
+-----------------+---------------------------------------------------+
|K | Kill that window. |
+-----------------+---------------------------------------------------+
|space or enter | Select that window. |
+-----------------+---------------------------------------------------+
The table format can be changed with the string and title option, the
title is displayed as table heading, while the lines are made by using
the string setting. The default setting is "Num Name%=Flags" for the
title and "%3n %t%=%f" for the lines. See the "STRING ESCAPES" chapter
for more codes (e.g. color settings).
"Windowlist" needs a region size of at least 10 characters wide and 6
characters high in order to display.
windows [ string ]
Uses the message line to display a list of all the windows. Each win-
dow is listed by number with the name of process that has been started
in the window (or its title); the current window is marked with a `*';
the previous window is marked with a `-'; all the windows that are
"logged in" are marked with a `$'; a background window that has
received a bell is marked with a `!'; a background window that is being
monitored and has had activity occur is marked with an `@'; a window
which has output logging turned on is marked with `(L)'; windows occu-
pied by other users are marked with `&'; windows in the zombie state
are marked with `Z'. If this list is too long to fit on the terminal's
status line only the portion around the current window is displayed.
The optional string parameter follows the "STRING ESCAPES" format. If
string parameter is passed, the output size is unlimited. The default
command without any parameter is limited to a size of 1024 bytes.
wrap [on|off]
Sets the line-wrap setting for the current window. When line-wrap is
on, the second consecutive printable character output at the last col-
umn of a line will wrap to the start of the following line. As an
added feature, backspace (^H) will also wrap through the left margin to
the previous line. Default is `on'. Without any options, the state of
wrap is toggled.
writebuf [-e encoding] [filename]
Writes the contents of the paste buffer to the specified file, or the
public accessible screen-exchange file if no filename is given. This is
thought of as a primitive means of communication between screen users
on the same host. If an encoding is specified the paste buffer is
recoded on the fly to match the encoding. The filename can be set with
the bufferfile command and defaults to "/tmp/screen-exchange".
writelock [on|off|auto]
In addition to access control lists, not all users may be able to write
to the same window at once. Per default, writelock is in `auto' mode
and grants exclusive input permission to the user who is the first to
switch to the particular window. When he leaves the window, other users
may obtain the writelock (automatically). The writelock of the current
window is disabled by the command "writelock off". If the user issues
the command "writelock on" he keeps the exclusive write permission
while switching to other windows.
xoff
xon
Insert a CTRL-s / CTRL-q character to the stdin queue of the current
window.
zmodem [off|auto|catch|pass]
zmodem sendcmd [string]
zmodem recvcmd [string]
Define zmodem support for screen. Screen understands two different
modes when it detects a zmodem request: "pass" and "catch". If the
mode is set to "pass", screen will relay all data to the attacher until
the end of the transmission is reached. In "catch" mode screen acts as
a zmodem endpoint and starts the corresponding rz/sz commands. If the
mode is set to "auto", screen will use "catch" if the window is a tty
(e.g. a serial line), otherwise it will use "pass".
You can define the templates screen uses in "catch" mode via the second
and the third form.
Note also that this is an experimental feature.
zombie [keys[onerror]]
Per default screen windows are removed from the window list as soon as
the windows process (e.g. shell) exits. When a string of two keys is
specified to the zombie command, `dead' windows will remain in the
list. The kill command may be used to remove such a window. Pressing
the first key in the dead window has the same effect. When pressing the
second key, screen will attempt to resurrect the window. The process
that was initially running in the window will be launched again. Call-
ing zombie without parameters will clear the zombie setting, thus mak-
ing windows disappear when their process exits.
As the zombie-setting is manipulated globally for all windows, this
command should probably be called defzombie, but it isn't.
Optionally you can put the word "onerror" after the keys. This will
cause screen to monitor exit status of the process running in the win-
dow. If it exits normally ('0'), the window disappears. Any other exit
value causes the window to become a zombie.
zombie_timeout[seconds]
Per default screen windows are removed from the window list as soon as
the windows process (e.g. shell) exits. If zombie keys are defined
(compare with above zombie command), it is possible to also set a time-
out when screen tries to automatically reconnect a dead screen window.
THE MESSAGE LINE
Screen displays informational messages and other diagnostics in a mes-
sage line. While this line is distributed to appear at the bottom of
the screen, it can be defined to appear at the top of the screen during
compilation. If your terminal has a status line defined in its term-
cap, screen will use this for displaying its messages, otherwise a line
of the current screen will be temporarily overwritten and output will
be momentarily interrupted. The message line is automatically removed
after a few seconds delay, but it can also be removed early (on termi-
nals without a status line) by beginning to type.
The message line facility can be used by an application running in the
current window by means of the ANSI Privacy message control sequence.
For instance, from within the shell, try something like:
echo '<esc>^Hello world from window '$WINDOW'<esc>\\'
where '<esc>' is an escape, '^' is a literal up-arrow, and '\\' turns
into a single backslash.
WINDOW TYPES
Screen provides three different window types. New windows are created
with screen's screen command (see also the entry in chapter "CUSTOMIZA-
TION"). The first parameter to the screen command defines which type of
window is created. The different window types are all special cases of
the normal type. They have been added in order to allow screen to be
used efficiently as a console multiplexer with 100 or more windows.
o The normal window contains a shell (default, if no parameter is
given) or any other system command that could be executed from a
shell (e.g. slogin, etc)
o If a tty (character special device) name (e.g. "/dev/ttya") is spec-
ified as the first parameter, then the window is directly connected
to this device. This window type is similar to "screen cu -l
/dev/ttya". Read and write access is required on the device node,
an exclusive open is attempted on the node to mark the connection
line as busy. An optional parameter is allowed consisting of a
comma separated list of flags in the notation used by stty(1):
<baud_rate>
Usually 300, 1200, 9600 or 19200. This affects transmission
as well as receive speed.
cs8 or cs7
Specify the transmission of eight (or seven) bits per byte.
ixon or -ixon
Enables (or disables) software flow-control (CTRL-S/CTRL-Q)
for sending data.
ixoff or -ixoff
Enables (or disables) software flow-control for receiving
data.
istrip or -istrip
Clear (or keep) the eight bit in each received byte.
You may want to specify as many of these options as applicable.
Unspecified options cause the terminal driver to make up the parame-
ter values of the connection. These values are system dependent and
may be in defaults or values saved from a previous connection.
For tty windows, the info command shows some of the modem control
lines in the status line. These may include `RTS', `CTS', 'DTR',
`DSR', `CD' and more. This depends on the available ioctl()'s and
system header files as well as the on the physical capabilities of
the serial board. Signals that are logical low (inactive) have
their name preceded by an exclamation mark (!), otherwise the signal
is logical high (active). Signals not supported by the hardware but
available to the ioctl() interface are usually shown low.
When the CLOCAL status bit is true, the whole set of modem signals
is placed inside curly braces ({ and }). When the CRTSCTS or TIOC-
SOFTCAR bit is set, the signals `CTS' or `CD' are shown in parenthe-
sis, respectively.
For tty windows, the command break causes the Data transmission line
(TxD) to go low for a specified period of time. This is expected to
be interpreted as break signal on the other side. No data is sent
and no modem control line is changed when a break is issued.
o If the first parameter is "//telnet", the second parameter is
expected to be a host name, and an optional third parameter may
specify a TCP port number (default decimal 23). Screen will connect
to a server listening on the remote host and use the telnet protocol
to communicate with that server.
For telnet windows, the command info shows details about the connection
in square brackets ([ and ]) at the end of the status line.
b BINARY. The connection is in binary mode.
e ECHO. Local echo is disabled.
c SGA. The connection is in `character mode' (default:
`line mode').
t TTYPE. The terminal type has been requested by the remote
host. Screen sends the name "screen" unless instructed
otherwise (see also the command `term').
w NAWS. The remote site is notified about window size
changes.
f LFLOW. The remote host will send flow control informa-
tion. (Ignored at the moment.)
Additional flags for debugging are x, t and n (XDISPLOC, TSPEED
and NEWENV).
For telnet windows, the command break sends the telnet code IAC
BREAK (decimal 243) to the remote host.
This window type is only available if screen was compiled with
the ENABLE_TELNET option defined.
STRING ESCAPES
Screen provides an escape mechanism to insert information like the cur-
rent time into messages or file names. The escape character is '%' with
one exception: inside of a window's hardstatus '^%' ('^E') is used
instead.
Here is the full list of supported escapes:
% the escape character itself
E sets %? to true if the escape character has been pressed.
f flags of the window, see "windows" for meanings of the various
flags
F sets %? to true if the window has the focus
h hardstatus of the window
H hostname of the system
n window number
P sets %? to true if the current region is in copy/paste mode
S session name
s window size
t window title
u all other users on this window
w all window numbers and names. With '-' qualifier: up to the cur-
rent window; with '+' qualifier: starting with the window after
the current one.
W all window numbers and names except the current one
x the executed command including arguments running in this windows
X the executed command without arguments running in this windows
? the part to the next '%?' is displayed only if a '%' escape
inside the part expands to a non-empty string
: else part of '%?'
= pad the string to the display's width (like TeX's hfill). If a
number is specified, pad to the percentage of the window's
width. A '0' qualifier tells screen to treat the number as
absolute position. You can specify to pad relative to the last
absolute pad position by adding a '+' qualifier or to pad rela-
tive to the right margin by using '-'. The padding truncates the
string if the specified position lies before the current posi-
tion. Add the 'L' qualifier to change this.
< same as '%=' but just do truncation, do not fill with spaces
> mark the current text position for the next truncation. When
screen needs to do truncation, it tries to do it in a way that
the marked position gets moved to the specified percentage of
the output area. (The area starts from the last absolute pad
position and ends with the position specified by the truncation
operator.) The 'L' qualifier tells screen to mark the truncated
parts with ''.
{ attribute/color modifier string terminated by the next "}"
` Substitute with the output of a 'backtick' command. The length
qualifier is misused to identify one of the commands.
The 'c' and 'C' escape may be qualified with a '0' to make screen use
zero instead of space as fill character. The '0' qualifier also makes
the '=' escape use absolute positions. The 'n' and '=' escapes under-
stand a length qualifier (e.g. '%3n'), 'D' and 'M' can be prefixed with
'L' to generate long names, 'w' and 'W' also show the window flags if
'L' is given.
An attribute/color modifier is is used to change the attributes or the
color settings. Its format is "[attribute modifier] [color descrip-
tion]". The attribute modifier must be prefixed by a change type indi-
cator if it can be confused with a color description. The following
change types are known:
+ add the specified set to the current attributes
- remove the set from the current attributes
! invert the set in the current attributes
= change the current attributes to the specified set
The attribute set can either be specified as a hexadecimal number or a
combination of the following letters:
d dim
u underline
b bold
r reverse
s standout
B blinking
Colors are coded either as a hexadecimal number or two letters specify-
ing the desired background and foreground color (in that order). The
following colors are known:
k black
r red
g green
y yellow
b blue
m magenta
c cyan
w white
d default color
. leave color unchanged
The capitalized versions of the letter specify bright colors. You can
also use the pseudo-color 'i' to set just the brightness and leave the
color unchanged.
A one digit/letter color description is treated as foreground or back-
ground color dependent on the current attributes: if reverse mode is
set, the background color is changed instead of the foreground color.
If you don't like this, prefix the color with a ".". If you want the
same behavior for two-letter color descriptions, also prefix them with
a ".".
As a special case, "%{-}" restores the attributes and colors that were
set before the last change was made (i.e., pops one level of the color-
change stack).
Examples:
"G" set color to bright green
"+b r" use bold red
"= yd" clear all attributes, write in default color on yellow back-
ground.
%-Lw%{= BW}%50>%n%f* %t%{-}%+Lw%<
The available windows centered at the current window and trun-
cated to the available width. The current window is displayed
white on blue. This can be used with "hardstatus alwayslast-
line".
%?%F%{.R.}%?%3n %t%? [%h]%?
The window number and title and the window's hardstatus, if one
is set. Also use a red background if this is the active focus.
Useful for "caption string".
FLOW-CONTROL
Each window has a flow-control setting that determines how screen deals
with the XON and XOFF characters (and perhaps the interrupt character).
When flow-control is turned off, screen ignores the XON and XOFF char-
acters, which allows the user to send them to the current program by
simply typing them (useful for the emacs editor, for instance). The
trade-off is that it will take longer for output from a "normal" pro-
gram to pause in response to an XOFF. With flow-control turned on, XON
and XOFF characters are used to immediately pause the output of the
current window. You can still send these characters to the current
program, but you must use the appropriate two-character screen commands
(typically "C-a q" (xon) and "C-a s" (xoff)). The xon/xoff commands
are also useful for typing C-s and C-q past a terminal that intercepts
these characters.
Each window has an initial flow-control value set with either the -f
option or the "defflow" .screenrc command. Per default the windows are
set to automatic flow-switching. It can then be toggled between the
three states 'fixed on', 'fixed off' and 'automatic' interactively with
the "flow" command bound to "C-a f".
The automatic flow-switching mode deals with flow control using the
TIOCPKT mode (like "rlogin" does). If the tty driver does not support
TIOCPKT, screen tries to find out the right mode based on the current
setting of the application keypad - when it is enabled, flow-control is
turned off and visa versa. Of course, you can still manipulate flow-
control manually when needed.
If you're running with flow-control enabled and find that pressing the
interrupt key (usually C-c) does not interrupt the display until
another 6-8 lines have scrolled by, try running screen with the "inter-
rupt" option (add the "interrupt" flag to the "flow" command in your
.screenrc, or use the -i command-line option). This causes the output
that screen has accumulated from the interrupted program to be flushed.
One disadvantage is that the virtual terminal's memory contains the
non-flushed version of the output, which in rare cases can cause minor
inaccuracies in the output. For example, if you switch screens and
return, or update the screen with "C-a l" you would see the version of
the output you would have gotten without "interrupt" being on. Also,
you might need to turn off flow-control (or use auto-flow mode to turn
it off automatically) when running a program that expects you to type
the interrupt character as input, as it is possible to interrupt the
output of the virtual terminal to your physical terminal when flow-con-
trol is enabled. If this happens, a simple refresh of the screen with
"C-a l" will restore it. Give each mode a try, and use whichever mode
you find more comfortable.
TITLES (naming windows)
You can customize each window's name in the window display (viewed with
the "windows" command (C-a w)) by setting it with one of the title com-
mands. Normally the name displayed is the actual command name of the
program created in the window. However, it is sometimes useful to dis-
tinguish various programs of the same name or to change the name on-
the-fly to reflect the current state of the window.
The default name for all shell windows can be set with the "shelltitle"
command in the .screenrc file, while all other windows are created with
a "screen" command and thus can have their name set with the -t option.
Interactively, there is the title-string escape-sequence
(<esc>kname<esc>\) and the "title" command (C-a A). The former can be
output from an application to control the window's name under software
control, and the latter will prompt for a name when typed. You can
also bind pre-defined names to keys with the "title" command to set
things quickly without prompting. Changing title bythis escape sequence
can be controlled by defdynamictitle and dynamictitle commands.
Finally, screen has a shell-specific heuristic that is enabled by set-
ting the window's name to "search|name" and arranging to have a null
title escape-sequence output as a part of your prompt. The search por-
tion specifies an end-of-prompt search string, while the name portion
specifies the default shell name for the window. If the name ends in a
`:' screen will add what it believes to be the current command running
in the window to the end of the window's shell name (e.g. "name:cmd").
Otherwise the current command name supersedes the shell name while it
is running.
Here's how it works: you must modify your shell prompt to output a
null title-escape-sequence (<esc>k<esc>\) as a part of your prompt.
The last part of your prompt must be the same as the string you speci-
fied for the search portion of the title. Once this is set up, screen
will use the title-escape-sequence to clear the previous command name
and get ready for the next command. Then, when a newline is received
from the shell, a search is made for the end of the prompt. If found,
it will grab the first word after the matched string and use it as the
command name. If the command name begins with either '!', '%', or '^'
screen will use the first word on the following line (if found) in
preference to the just-found name. This helps csh users get better
command names when using job control or history recall commands.
Here's some .screenrc examples:
screen -t top 2 nice top
Adding this line to your .screenrc would start a nice-d version of the
"top" command in window 2 named "top" rather than "nice".
shelltitle '> |csh'
screen 1
These commands would start a shell with the given shelltitle. The
title specified is an auto-title that would expect the prompt and the
typed command to look something like the following:
/usr/joe/src/dir> trn
(it looks after the '> ' for the command name). The window status
would show the name "trn" while the command was running, and revert to
"csh" upon completion.
bind R screen -t '% |root:' su
Having this command in your .screenrc would bind the key sequence "C-a
R" to the "su" command and give it an auto-title name of "root:". For
this auto-title to work, the screen could look something like this:
% !em
emacs file.c
Here the user typed the csh history command "!em" which ran the previ-
ously entered "emacs" command. The window status would show
"root:emacs" during the execution of the command, and revert to simply
"root:" at its completion.
bind o title
bind E title ""
bind u title (unknown)
The first binding doesn't have any arguments, so it would prompt you
for a title. when you type "C-a o". The second binding would clear an
auto-title's current setting (C-a E). The third binding would set the
current window's title to "(unknown)" (C-a u).
One thing to keep in mind when adding a null title-escape-sequence to
your prompt is that some shells (like the csh) count all the non-con-
trol characters as part of the prompt's length. If these invisible
characters aren't a multiple of 8 then backspacing over a tab will
result in an incorrect display. One way to get around this is to use a
prompt like this:
set prompt='^[[0000m^[k^[\% '
The escape-sequence "<esc>[0000m" not only normalizes the character
attributes, but all the zeros round the length of the invisible charac-
ters up to 8. Bash users will probably want to echo the escape
sequence in the PROMPT_COMMAND:
PROMPT_COMMAND='printf "\033k\033\134"'
(I used "\134" to output a `\' because of a bug in bash v1.04).
THE VIRTUAL TERMINAL
Each window in a screen session emulates a VT100 terminal, with some
extra functions added. The VT100 emulator is hard-coded, no other ter-
minal types can be emulated.
Usually screen tries to emulate as much of the VT100/ANSI standard as
possible. But if your terminal lacks certain capabilities, the emula-
tion may not be complete. In these cases screen has to tell the appli-
cations that some of the features are missing. This is no problem on
machines using termcap, because screen can use the $TERMCAP variable to
customize the standard screen termcap.
But if you do a rlogin on another machine or your machine supports only
terminfo this method fails. Because of this, screen offers a way to
deal with these cases. Here is how it works:
When screen tries to figure out a terminal name for itself, it first
looks for an entry named "screen.<term>", where <term> is the contents
of your $TERM variable. If no such entry exists, screen tries "screen"
(or "screen-w" if the terminal is wide (132 cols or more)). If even
this entry cannot be found, "vt100" is used as a substitute.
The idea is that if you have a terminal which doesn't support an impor-
tant feature (e.g. delete char or clear to EOS) you can build a new
termcap/terminfo entry for screen (named "screen.<dumbterm>") in which
this capability has been disabled. If this entry is installed on your
machines you are able to do a rlogin and still keep the correct term-
cap/terminfo entry. The terminal name is put in the $TERM variable of
all new windows. Screen also sets the $TERMCAP variable reflecting the
capabilities of the virtual terminal emulated. Notice that, however, on
machines using the terminfo database this variable has no effect. Fur-
thermore, the variable $WINDOW is set to the window number of each win-
dow.
The actual set of capabilities supported by the virtual terminal
depends on the capabilities supported by the physical terminal. If,
for instance, the physical terminal does not support underscore mode,
screen does not put the `us' and `ue' capabilities into the window's
$TERMCAP variable, accordingly. However, a minimum number of capabili-
ties must be supported by a terminal in order to run screen; namely
scrolling, clear screen, and direct cursor addressing (in addition,
screen does not run on hardcopy terminals or on terminals that over-
strike).
Also, you can customize the $TERMCAP value used by screen by using the
"termcap" .screenrc command, or by defining the variable $SCREENCAP
prior to startup. When the is latter defined, its value will be copied
verbatim into each window's $TERMCAP variable. This can either be the
full terminal definition, or a filename where the terminal "screen"
(and/or "screen-w") is defined.
Note that screen honors the "terminfo" .screenrc command if the system
uses the terminfo database rather than termcap.
When the boolean `G0' capability is present in the termcap entry for
the terminal on which screen has been called, the terminal emulation of
screen supports multiple character sets. This allows an application to
make use of, for instance, the VT100 graphics character set or national
character sets. The following control functions from ISO 2022 are sup-
ported: lock shift G0 (SI), lock shift G1 (SO), lock shift G2, lock
shift G3, single shift G2, and single shift G3. When a virtual termi-
nal is created or reset, the ASCII character set is designated as G0
through G3. When the `G0' capability is present, screen evaluates the
capabilities `S0', `E0', and `C0' if present. `S0' is the sequence the
terminal uses to enable and start the graphics character set rather
than SI. `E0' is the corresponding replacement for SO. `C0' gives a
character by character translation string that is used during semi-
graphics mode. This string is built like the `acsc' terminfo capabil-
ity.
When the `po' and `pf' capabilities are present in the terminal's term-
cap entry, applications running in a screen window can send output to
the printer port of the terminal. This allows a user to have an appli-
cation in one window sending output to a printer connected to the ter-
minal, while all other windows are still active (the printer port is
enabled and disabled again for each chunk of output). As a side-
effect, programs running in different windows can send output to the
printer simultaneously. Data sent to the printer is not displayed in
the window. The info command displays a line starting `PRIN' while the
printer is active.
Screen maintains a hardstatus line for every window. If a window gets
selected, the display's hardstatus will be updated to match the win-
dow's hardstatus line. If the display has no hardstatus the line will
be displayed as a standard screen message. The hardstatus line can be
changed with the ANSI Application Program Command (APC):
"ESC_<string>ESC\". As a convenience for xterm users the sequence
"ESC]0..2;<string>^G" is also accepted.
Some capabilities are only put into the $TERMCAP variable of the vir-
tual terminal if they can be efficiently implemented by the physical
terminal. For instance, `dl' (delete line) is only put into the $TERM-
CAP variable if the terminal supports either delete line itself or
scrolling regions. Note that this may provoke confusion, when the ses-
sion is reattached on a different terminal, as the value of $TERMCAP
cannot be modified by parent processes.
The "alternate screen" capability is not enabled by default. Set the
altscreen .screenrc command to enable it.
The following is a list of control sequences recognized by screen.
"(V)" and "(A)" indicate VT100-specific and ANSI- or ISO-specific func-
tions, respectively.
ESC E Next Line
ESC D Index
ESC M Reverse Index
ESC H Horizontal Tab Set
ESC Z Send VT100 Identification String
ESC 7 (V) Save Cursor and Attributes
ESC 8 (V) Restore Cursor and Attributes
ESC [s (A) Save Cursor and Attributes
ESC [u (A) Restore Cursor and Attributes
ESC c Reset to Initial State
ESC g Visual Bell
ESC Pn p Cursor Visibility (97801)
Pn = 6 Invisible
Pn = 7 Visible
ESC = (V) Application Keypad Mode
ESC > (V) Numeric Keypad Mode
ESC # 8 (V) Fill Screen with E's
ESC \ (A) String Terminator
ESC ^ (A) Privacy Message String (Message Line)
ESC ! Global Message String (Message Line)
ESC k A.k.a. Definition String
ESC P (A) Device Control String. Outputs a string
directly to the host terminal without inter-
pretation.
ESC _ (A) Application Program Command (Hardstatus)
ESC ] 0 ; string ^G (A) Operating System Command (Hardstatus, xterm
title hack)
ESC ] 83 ; cmd ^G (A) Execute screen command. This only works if
multi-user support is compiled into screen.
The pseudo-user ":window:" is used to check
the access control list. Use "addacl :win-
dow: -rwx #?" to create a user with no
rights and allow only the needed commands.
Control-N (A) Lock Shift G1 (SO)
Control-O (A) Lock Shift G0 (SI)
ESC n (A) Lock Shift G2
ESC o (A) Lock Shift G3
ESC N (A) Single Shift G2
ESC O (A) Single Shift G3
ESC ( Pcs (A) Designate character set as G0
ESC ) Pcs (A) Designate character set as G1
ESC * Pcs (A) Designate character set as G2
ESC + Pcs (A) Designate character set as G3
ESC [ Pn ; Pn H Direct Cursor Addressing
ESC [ Pn ; Pn f same as above
ESC [ Pn J Erase in Display
Pn = None or 0 From Cursor to
End of Screen
Pn = 1 From Beginning of
Screen to Cursor
Pn = 2 Entire Screen
ESC [ Pn K Erase in Line
Pn = None or 0 From Cursor to
End of Line
Pn = 1 From Beginning of
Line to Cursor
Pn = 2 Entire Line
ESC [ Pn X Erase character
ESC [ Pn A Cursor Up
ESC [ Pn B Cursor Down
ESC [ Pn C Cursor Right
ESC [ Pn D Cursor Left
ESC [ Pn E Cursor next line
ESC [ Pn F Cursor previous line
ESC [ Pn G Cursor horizontal position
ESC [ Pn ` same as above
ESC [ Pn d Cursor vertical position
ESC [ Ps ;; Ps m Select Graphic Rendition
Ps = None or 0 Default Rendition
Ps = 1 Bold
Ps = 2 (A) Faint
Ps = 3 (A) Standout Mode
(ANSI: Itali-
cized)
Ps = 4 Underlined
Ps = 5 Blinking
Ps = 7 Negative Image
Ps = 22 (A) Normal Intensity
Ps = 23 (A) Standout Mode off
(ANSI: Italicized
off)
Ps = 24 (A) Not Underlined
Ps = 25 (A) Not Blinking
Ps = 27 (A) Positive Image
Ps = 30 (A) Foreground Black
Ps = 31 (A) Foreground Red
Ps = 32 (A) Foreground Green
Ps = 33 (A) Foreground Yellow
Ps = 34 (A) Foreground Blue
Ps = 35 (A) Foreground
Magenta
Ps = 36 (A) Foreground Cyan
Ps = 37 (A) Foreground White
Ps = 39 (A) Foreground
Default
Ps = 40 (A) Background Black
Ps =
Ps = 49 (A) Background
Default
ESC [ Pn g Tab Clear
Pn = None or 0 Clear Tab at Cur-
rent Position
Pn = 3 Clear All Tabs
ESC [ Pn ; Pn r (V) Set Scrolling Region
ESC [ Pn I (A) Horizontal Tab
ESC [ Pn Z (A) Backward Tab
ESC [ Pn L (A) Insert Line
ESC [ Pn M (A) Delete Line
ESC [ Pn @ (A) Insert Character
ESC [ Pn P (A) Delete Character
ESC [ Pn S Scroll Scrolling Region Up
ESC [ Pn T Scroll Scrolling Region Down
ESC [ Pn ^ same as above
ESC [ Ps ;; Ps h Set Mode
ESC [ Ps ;; Ps l Reset Mode
Ps = 4 (A) Insert Mode
Ps = 20 (A) Automatic Line-
feed Mode
Ps = 34 Normal Cursor
Visibility
Ps = ?1 (V) Application Cur-
sor Keys
Ps = ?3 (V) Change Terminal
Width to 132 col-
umns
Ps = ?5 (V) Reverse Video
Ps = ?6 (V) Origin Mode
Ps = ?7 (V) Wrap Mode
Ps = ?9 X10 mouse track-
ing
Ps = ?25 (V) Visible Cursor
Ps = ?47 Alternate Screen
(old xterm code)
Ps = ?1000 (V) VT200 mouse
tracking
Ps = ?1047 Alternate Screen
(new xterm code)
Ps = ?1049 Alternate Screen
(new xterm code)
ESC [ 5 i (A) Start relay to printer (ANSI Media Copy)
ESC [ 4 i (A) Stop relay to printer (ANSI Media Copy)
ESC [ 8 ; Ph ; Pw t Resize the window to `Ph' lines and `Pw'
columns (SunView special)
ESC [ c Send VT100 Identification String
ESC [ x Send Terminal Parameter Report
ESC [ > c Send VT220 Secondary Device Attributes
String
ESC [ 6 n Send Cursor Position Report
INPUT TRANSLATION
In order to do a full VT100 emulation screen has to detect that a
sequence of characters in the input stream was generated by a keypress
on the user's keyboard and insert the VT100 style escape sequence.
Screen has a very flexible way of doing this by making it possible to
map arbitrary commands on arbitrary sequences of characters. For stan-
dard VT100 emulation the command will always insert a string in the
input buffer of the window (see also command stuff in the command ta-
ble). Because the sequences generated by a keypress can change after a
reattach from a different terminal type, it is possible to bind com-
mands to the termcap name of the keys. Screen will insert the correct
binding after each reattach. See the bindkey command for further
details on the syntax and examples.
Here is the table of the default key bindings. The fourth is what com-
mand is executed if the keyboard is switched into application mode.
+----------------+--------------+----------+----------+
|Key name | Termcap name | Command | App mode |
+----------------+--------------+----------+----------+
|Cursor up | ku | \033[A | \033OA |
+----------------+--------------+----------+----------+
|Cursor down | kd | \033[B | \033OB |
+----------------+--------------+----------+----------+
|Cursor right | kr | \033[C | \033OC |
+----------------+--------------+----------+----------+
|Cursor left | kl | \033[D | \033OD |
+----------------+--------------+----------+----------+
|Function key 0 | k0 | \033[10~ | |
+----------------+--------------+----------+----------+
|Function key 1 | k1 | \033OP | |
+----------------+--------------+----------+----------+
|Function key 2 | k2 | \033OQ | |
+----------------+--------------+----------+----------+
|Function key 3 | k3 | \033OR | |
+----------------+--------------+----------+----------+
|Function key 4 | k4 | \033OS | |
+----------------+--------------+----------+----------+
|Function key 5 | k5 | \033[15~ | |
+----------------+--------------+----------+----------+
|Function key 6 | k6 | \033[17~ | |
+----------------+--------------+----------+----------+
|Function key 7 | k7 | \033[18~ | |
+----------------+--------------+----------+----------+
|Function key 8 | k8 | \033[19~ | |
+----------------+--------------+----------+----------+
|Function key 9 | k9 | \033[20~ | |
+----------------+--------------+----------+----------+
|Function key 10 | k; | \033[21~ | |
+----------------+--------------+----------+----------+
|Function key 11 | F1 | \033[23~ | |
+----------------+--------------+----------+----------+
|Function key 12 | F2 | \033[24~ | |
+----------------+--------------+----------+----------+
|Home | kh | \033[1~ | |
+----------------+--------------+----------+----------+
|End | kH | \033[4~ | |
+----------------+--------------+----------+----------+
|Insert | kI | \033[2~ | |
+----------------+--------------+----------+----------+
|Delete | kD | \033[3~ | |
+----------------+--------------+----------+----------+
|Page up | kP | \033[5~ | |
+----------------+--------------+----------+----------+
|Page down | kN | \033[6~ | |
+----------------+--------------+----------+----------+
|Keypad 0 | f0 | 0 | \033Op |
+----------------+--------------+----------+----------+
|Keypad 1 | f1 | 1 | \033Oq |
+----------------+--------------+----------+----------+
|Keypad 2 | f2 | 2 | \033Or |
+----------------+--------------+----------+----------+
|Keypad 3 | f3 | 3 | \033Os |
+----------------+--------------+----------+----------+
|Keypad 4 | f4 | 4 | \033Ot |
+----------------+--------------+----------+----------+
|Keypad 5 | f5 | 5 | \033Ou |
+----------------+--------------+----------+----------+
|Keypad 6 | f6 | 6 | \033Ov |
+----------------+--------------+----------+----------+
|Keypad 7 | f7 | 7 | \033Ow |
+----------------+--------------+----------+----------+
|Keypad 8 | f8 | 8 | \033Ox |
+----------------+--------------+----------+----------+
|Keypad 9 | f9 | 9 | \033Oy |
+----------------+--------------+----------+----------+
|Keypad + | f+ | + | \033Ok |
+----------------+--------------+----------+----------+
|Keypad - | f- | - | \033Om |
+----------------+--------------+----------+----------+
|Keypad * | f* | * | \033Oj |
+----------------+--------------+----------+----------+
|Keypad / | f/ | / | \033Oo |
+----------------+--------------+----------+----------+
|Keypad = | fq +----------+ \033OX |
+----------------+--------------+----------+----------+
|Keypad . | f. | . | \033On |
+----------------+--------------+----------+----------+
|Keypad , | f, | , | \033Ol |
+----------------+--------------+----------+----------+
|Keypad enter | fe | \015 | \033OM |
+----------------+--------------+----------+----------+
SPECIAL TERMINAL CAPABILITIES
The following table describes all terminal capabilities that are recog-
nized by screen and are not in the termcap(5) manual. You can place
these capabilities in your termcap entries (in `/etc/termcap') or use
them with the commands `termcap', `terminfo' and `termcapinfo' in your
screenrc files. It is often not possible to place these capabilities in
the terminfo database.
LP (bool) Terminal has VT100 style margins (`magic margins'). Note
that this capability is obsolete because screen uses the
standard 'xn' instead.
Z0 (str) Change width to 132 columns.
Z1 (str) Change width to 80 columns.
WS (str) Resize display. This capability has the desired width and
height as arguments. SunView(tm) example: '\E[8;%d;%dt'.
NF (bool) Terminal doesn't need flow control. Send ^S and ^Q direct
to the application. Same as 'flow off'. The opposite of
this capability is 'nx'.
G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
S0 (str) Switch charset 'G0' to the specified charset. Default is
'\E(%.'.
E0 (str) Switch charset 'G0' back to standard charset. Default is
'\E(B'.
C0 (str) Use the string as a conversion table for font '0'. See the
'ac' capability for more details.
CS (str) Switch cursor-keys to application mode.
CE (str) Switch cursor-keys back to normal mode.
AN (bool) Turn on autonuke. See the 'autonuke' command for more
details.
OL (num) Set the output buffer limit. See the 'obuflimit' command
for more details.
KJ (str) Set the encoding of the terminal. See the 'encoding' com-
mand for valid encodings.
AF (str) Change character foreground color in an ANSI conform way.
This capability will almost always be set to '\E[3%dm'
('\E[3%p1%dm' on terminfo machines).
AB (str) Same as 'AF', but change background color.
AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
\E[49m).
XC (str) Describe a translation of characters to strings depending
on the current font. More details follow in the next sec-
tion.
XT (bool) Terminal understands special xterm sequences (OSC, mouse
tracking).
C8 (bool) Terminal needs bold to display high-intensity colors (e.g.
Eterm).
TF (bool) Add missing capabilities to the termcap/info entry. (Set
by default).
CHARACTER TRANSLATION
Screen has a powerful mechanism to translate characters to arbitrary
strings depending on the current font and terminal type. Use this fea-
ture if you want to work with a common standard character set (say
ISO8851-latin1) even on terminals that scatter the more unusual charac-
ters over several national language font pages.
Syntax:
XC=<charset-mapping>{,,<charset-mapping>}
<charset-mapping> := <designator><template>{,<mapping>}
<mapping> := <char-to-be-mapped><template-arg>
The things in braces may be repeated any number of times.
A <charset-mapping> tells screen how to map characters in font <desig-
nator> ('B': Ascii, 'A': UK, 'K': German, etc.) to strings. Every
<mapping> describes to what string a single character will be trans-
lated. A template mechanism is used, as most of the time the codes have
a lot in common (for example strings to switch to and from another
charset). Each occurrence of '%' in <template> gets substituted with
the <template-arg> specified together with the character. If your
strings are not similar at all, then use '%' as a template and place
the full string in <template-arg>. A quoting mechanism was added to
make it possible to use a real '%'. The '\' character quotes the spe-
cial characters '\', '%', and ','.
Here is an example:
termcap hp700 'XC=B\E(K%\E(B,\304[,\326\\\\,\334]'
This tells screen how to translate ISOlatin1 (charset 'B') upper case
umlaut characters on a hp700 terminal that has a German charset. '\304'
gets translated to '\E(K[\E(B' and so on. Note that this line gets
parsed *three* times before the internal lookup table is built, there-
fore a lot of quoting is needed to create a single '\'.
Another extension was added to allow more emulation: If a mapping
translates the unquoted '%' char, it will be sent to the terminal when-
ever screen switches to the corresponding <designator>. In this special
case the template is assumed to be just '%' because the charset switch
sequence and the character mappings normally haven't much in common.
This example shows one use of the extension:
termcap xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334'
Here, a part of the German ('K') charset is emulated on an xterm. If
screen has to change to the 'K' charset, '\E(B' will be sent to the
terminal, i.e. the ASCII charset is used instead. The template is just
'%', so the mapping is straightforward: '[' to '\304', '\' to '\326',
and ']' to '\334'.
ENVIRONMENT
COLUMNS Number of columns on the terminal (overrides termcap
entry).
HOME Directory in which to look for .screenrc.
LINES Number of lines on the terminal (overrides termcap
entry).
LOCKPRG Screen lock program.
NETHACKOPTIONS Turns on nethack option.
PATH Used for locating programs to run.
SCREENCAP For customizing a terminal's TERMCAP value.
SCREENDIR Alternate socket directory.
SCREENRC Alternate user screenrc file.
SHELL Default shell program for opening windows (default
"/bin/sh"). See also "shell" .screenrc command.
STY Alternate socket name.
SYSSCREENRC Alternate system screenrc file.
TERM Terminal name.
TERMCAP Terminal description.
WINDOW Window number of a window (at creation time).
FILES
/screen-4.?.??/etc/screenrc
/screen-4.?.??/etc/etcscreenrc Examples in the screen distribution
package for private and global ini-
tialization files.
$SYSSCREENRC
/etc/screenrc screen initialization commands
$SCREENRC
$HOME/.screenrc Read in after /etc/screenrc
$SCREENDIR/S-<login>
/local/screens/S-<login> Socket directories (default)
/usr/tmp/screens/S-<login> Alternate socket directories.
<socket directory>/.termcap Written by the "termcap" output func-
tion
/usr/tmp/screens/screen-exchange or
/tmp/screen-exchange screen `interprocess communication
buffer'
hardcopy.[0-9] Screen images created by the hardcopy
function
screenlog.[0-9] Output log files created by the log
function
/usr/lib/terminfo/?/* or
/etc/termcap Terminal capability databases
/etc/utmp Login records
$LOCKPRG Program that locks a terminal.
SEE ALSO
termcap(5), utmp(5), vi(1), captoinfo(1), tic(1)
AUTHORS
Originally created by Oliver Laumann. For a long time maintained and
developed by Juergen Weigert, Michael Schroeder, Micah Cowan and Sadrul
Habib Chowdhury. This latest version was produced by Amadeusz Slawinski
<amade AT asmblr.net> and Alexander Naumov <alexander_naumov@open-
suse.org>.
COPYLEFT
Copyright (c) 2015-2017
Juergen Weigert <jnweiger AT immd4.de>
Alexander Naumov <alexander_naumov AT opensuse.org>
Amadeusz Slawinski <amade AT asmblr.net>
Copyright (c) 2010-2015
Juergen Weigert <jnweiger AT immd4.de>
Sadrul Habib Chowdhury <sadrul AT users.net>
Copyright (c) 2008, 2009
Juergen Weigert <jnweiger AT immd4.de>
Michael Schroeder <mlschroe AT immd4.de>
Micah Cowan <micah AT cowan.name>
Sadrul Habib Chowdhury <sadrul AT users.net>
Copyright (C) 1993-2003
Juergen Weigert <jnweiger AT immd4.de>
Michael Schroeder <mlschroe AT immd4.de>
Copyright (C) 1987 Oliver Laumann
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 3, or (at your option) any
later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along
with this program (see the file COPYING); if not, write to the Free
Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA
CONTRIBUTORS
Eric S. Raymond <esr AT thyrsus.com>,
Thomas Renninger <treen AT suse.com>,
Axel Beckert <abe AT deuxchevaux.org>,
Ken Beal <kbeal AT amber.com>,
Rudolf Koenig <rfkoenig AT immd4.de>,
Toerless Eckert <eckert AT immd4.de>,
Wayne Davison <davison AT borland.com>,
Patrick Wolfe <pat AT kai.com, kailand!pat>,
Bart Schaefer <schaefer AT cse.edu>,
Nathan Glasser <nathan AT brokaw.edu>,
Larry W. Virden <lvirden AT cas.org>,
Howard Chu <hyc AT hanauma.gov>,
Tim MacKenzie <tym AT dibbler.au>,
Markku Jarvinen <mta@{cc,cs,ee}.tut.fi>,
Marc Boucher <marc AT CAM.ORG>,
Doug Siebert <dsiebert AT isca.edu>,
Ken Stillson <stillson AT tsfsrv.org>,
Ian Frechett <frechett AT spot.EDU>,
Brian Koehmstedt <bpk AT gnu.edu>,
Don Smith <djs6015 AT ultb.edu>,
Frank van der Linden <vdlinden AT fwi.nl>,
Martin Schweikert <schweik AT cpp.de>,
David Vrona <dave AT sashimi.com>,
E. Tye McQueen <tye%spillman.UUCP AT uunet.net>,
Matthew Green <mrg AT eterna.au>,
Christopher Williams <cgw AT pobox.com>,
Matt Mosley <mattm AT access.net>,
Gregory Neil Shapiro <gshapiro AT wpi.EDU>,
Johannes Zellner <johannes AT zellner.org>,
Pablo Averbuj <pablo AT averbuj.com>.
AVAILABILITY
The latest official release of screen available via anonymous ftp from
ftp.gnu.org/gnu/screen/ or any other GNU distribution site. The home
site of screen is savannah.gnu.org/projects/screen/. If you want to
help, send a note to screen-devel AT gnu.org.
BUGS
o `dm' (delete mode) and `xs' are not handled correctly (they are
ignored). `xn' is treated as a magic-margin indicator.
o Screen has no clue about double-high or double-wide characters. But
this is the only area where vttest is allowed to fail.
o It is not possible to change the environment variable $TERMCAP when
reattaching under a different terminal type.
o The support of terminfo based systems is very limited. Adding extra
capabilities to $TERMCAP may not have any effects.
o Screen does not make use of hardware tabs.
o Screen must be installed as set-uid with owner root on most systems
in order to be able to correctly change the owner of the tty device
file for each window. Special permission may also be required to
write the file "/etc/utmp".
o Entries in "/etc/utmp" are not removed when screen is killed with
SIGKILL. This will cause some programs (like "w" or "rwho") to
advertise that a user is logged on who really isn't.
o Screen may give a strange warning when your tty has no utmp entry.
o When the modem line was hung up, screen may not automatically detach
(or quit) unless the device driver is configured to send a HANGUP
signal. To detach a screen session use the -D or -d command line
option.
o If a password is set, the command line options -d and -D still
detach a session without asking.
o Both "breaktype" and "defbreaktype" change the break generating
method used by all terminal devices. The first should change a win-
dow specific setting, where the latter should change only the
default for new windows.
o When attaching to a multiuser session, the user's .screenrc file is
not sourced. Each user's personal settings have to be included in
the .screenrc file from which the session is booted, or have to be
changed manually.
o A weird imagination is most useful to gain full advantage of all the
features.
o Send bug-reports, fixes, enhancements, t-shirts, money, beer & pizza
to screen-devel AT gnu.org.
4th Berkeley Distribution Oct 2017 SCREEN(1)
Linux-Distributionen
Huschi als Linux-Admin