NetAddr::IP::Lite(category25-plesk.html) - phpMan

Lite(3)               User Contributed Perl Documentation              Lite(3)

NAME
       NetAddr::IP::Lite - Manages IPv4 and IPv6 addresses and subnets
SYNOPSIS
         use NetAddr::IP::Lite qw(
               Zeros
               Ones
               V4mask
               V4net
               :aton           DEPRECATED !
               :old_nth
               :upper
               :lower
         );
         my $ip = new NetAddr::IP::Lite '127.0.0.1';
               or if your prefer
         my $ip = NetAddr::IP::Lite->new('127.0.0.1);
               or from a packed IPv4 address
         my $ip = new_from_aton NetAddr::IP::Lite (inet_aton('127.0.0.1'));
               or from an octal filtered IPv4 address
         my $ip = new_no NetAddr::IP::Lite '127.012.0.0';
         print "The address is ", $ip->addr, " with mask ", $ip->mask, "\n" ;
         if ($ip->within(new NetAddr::IP::Lite "127.0.0.0", "255.0.0.0")) {
             print "Is a loopback address\n";
         }
                                       # This prints 127.0.0.1/32
         print "You can also say $ip...\n";
         The following four functions return ipV6 representations of:
         ::                                       = Zeros();
         FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF  = Ones();
         FFFF:FFFF:FFFF:FFFF:FFFF:FFFF::          = V4mask();
         ::FFFF:FFFF                              = V4net();
INSTALLATION
       Un-tar the distribution in an appropriate directory and type:
               perl Makefile.PL
               make
               make test
               make install
       NetAddr::IP::Lite depends on NetAddr::IP::Util which installs by
       default with its primary functions compiled using Perl's XS extensions
       to build a 'C' library. If you do not have a 'C' complier available or
       would like the slower Pure Perl version for some other reason, then
       type:
               perl Makefile.PL -noxs
               make
               make test
               make install
DESCRIPTION
       This module provides an object-oriented abstraction on top of IP
       addresses or IP subnets, that allows for easy manipulations. Most of
       the operations of NetAddr::IP are supported. This module will work with
       older versions of Perl and is compatible with Math::BigInt.
       * By default NetAddr::IP functions and methods return string IPv6
       addresses in uppercase.  To change that to lowercase:
       NOTE: the AUGUST 2010 RFC5952 states:
           4.3. Lowercase
             The characters "a", "b", "c", "d", "e", and "f" in an IPv6
             address MUST be represented in lowercase.
       It is recommended that all NEW applications using NetAddr::IP::Lite be
       invoked as shown on the next line.
         use NetAddr::IP::Lite qw(:lower);
       * To ensure the current IPv6 string case behavior even if the default
       changes:
         use NetAddr::IP::Lite qw(:upper);
       The internal representation of all IP objects is in 128 bit IPv6
       notation.  IPv4 and IPv6 objects may be freely mixed.
       The supported operations are described below:
   Overloaded Operators
       Assignment ("=")
           Has been optimized to copy one NetAddr::IP::Lite object to another
           very quickly.
       "->copy()"
           The assignment ("=") operation is only put in to operation when the
           copied object is further mutated by another overloaded operation.
           See overload SPECIAL SYMBOLS FOR "use overload" for details.
           "->copy()" actually creates a new object when called.
       Stringification
           An object can be used just as a string. For instance, the following
           code
                   my $ip = new NetAddr::IP::Lite '192.168.1.123';
                   print "$ip\n";
           Will print the string 192.168.1.123/32.
                   my $ip = new6 NetAddr::IP::Lite '192.168.1.123';
                   print "$ip\n";
           Will print the string 0:0:0:0:0:0:C0A8:17B/128
       Equality
           You can test for equality with either "eq", "ne", "==" or "!=".
           "eq", "ne" allows the comparison with arbitrary strings as well as
           NetAddr::IP::Lite objects. The following example:
               if (NetAddr::IP::Lite->new('127.0.0.1','255.0.0.0') eq '127.0.0.1/8')
                  { print "Yes\n"; }
           Will print out "Yes".
           Comparison with "==" and "!=" requires both operands to be
           NetAddr::IP::Lite objects.
       Comparison via >, <, >=, <=, <=> and "cmp"
           Internally, all network objects are represented in 128 bit format.
           The numeric representation of the network is compared through the
           corresponding operation. Comparisons are tried first on the address
           portion of the object and if that is equal then the NUMERIC cidr
           portion of the masks are compared. This leads to the
           counterintuitive result that
                   /24 > /16
           Comparison should not be done on netaddr objects with different
           CIDR as this may produce indeterminate - unexpected results, rather
           the determination of which netblock is larger or smaller should be
           done by comparing
                   $ip1->masklen <=> $ip2->masklen
       Addition of a constant ("+")
           Add a 32 bit signed constant to the address part of a NetAddr
           object.  This operation changes the address part to point so many
           hosts above the current objects start address. For instance, this
           code:
               print NetAddr::IP::Lite->new('127.0.0.1/8') + 5;
           will output 127.0.0.6/8. The address will wrap around at the
           broadcast back to the network address. This code:
               print NetAddr::IP::Lite->new('10.0.0.1/24') + 255;
           outputs 10.0.0.0/24.
           Returns the the unchanged object when the constant is missing or
           out of range.
               2147483647 <= constant >= -2147483648
       Subtraction of a constant ("-")
           The complement of the addition of a constant.
       Difference ("-")
           Returns the difference between the address parts of two
           NetAddr::IP::Lite objects address parts as a 32 bit signed number.
           Returns undef if the difference is out of range.
       Auto-increment
           Auto-incrementing a NetAddr::IP::Lite object causes the address
           part to be adjusted to the next host address within the subnet. It
           will wrap at the broadcast address and start again from the network
           address.
       Auto-decrement
           Auto-decrementing a NetAddr::IP::Lite object performs exactly the
           opposite of auto-incrementing it, as you would expect.
   Methods
       "->new([$addr, [ $mask|IPv6 ]])"
       "->new6([$addr, [ $mask]])"
       "->new_no([$addr, [ $mask]])"
       "->new_from_aton($netaddr)"
       new_cis and new_cis6 are DEPRECATED
       "->new_cis("$addr $mask)"
       "->new_cis6("$addr $mask)"
           The first two methods create a new address with the supplied
           address in $addr and an optional netmask $mask, which can be
           omitted to get a /32 or /128 netmask for IPv4 / IPv6 addresses
           respectively.
           The third method "new_no" is exclusively for IPv4 addresses and
           filters improperly formatted dot quad strings for leading 0's that
           would normally be interpreted as octal format by NetAddr per the
           specifications for inet_aton.
           new_from_aton takes a packed IPv4 address and assumes a /32 mask.
           This function replaces the DEPRECATED :aton functionality which is
           fundamentally broken.
           The last two methods new_cis and new_cis6 differ from new and new6
           only in that they except the common Cisco address notation for
           address/mask pairs with a space as a separator instead of a slash
           (/)
           These methods are DEPRECATED because the functionality is now
           included in the other "new" methods
             i.e.  ->new_cis('1.2.3.0 24')
                   or
                   ->new_cis6('::1.2.3.0 120')
           "->new6" and "->new_cis6" mark the address as being in ipV6 address
           space even if the format would suggest otherwise.
             i.e.  ->new6('1.2.3.4') will result in ::102:304
             addresses submitted to ->new in ipV6 notation will
             remain in that notation permanently. i.e.
                   ->new('::1.2.3.4') will result in ::102:304
             whereas new('1.2.3.4') would print out as 1.2.3.4
             See "STRINGIFICATION" below.
           $addr can be almost anything that can be resolved to an IP address
           in all the notations I have seen over time. It can optionally
           contain the mask in CIDR notation. If the OPTIONAL perl module
           Socket6 is available in the local library it will autoload and ipV6
           host6 names will be resolved as well as ipV4 hostnames.
           prefix notation is understood, with the limitation that the range
           specified by the prefix must match with a valid subnet.
           Addresses in the same format returned by "inet_aton" or
           "gethostbyname" can also be understood, although no mask can be
           specified for them. The default is to not attempt to recognize this
           format, as it seems to be seldom used.
           ###### DEPRECATED, will be remove in version 5 ############ To
           accept addresses in that format, invoke the module as in
             use NetAddr::IP::Lite ':aton'
           ###### USE new_from_aton instead ##########################
           If called with no arguments, 'default' is assumed.
           If called with an empty string as the argument, returns 'undef'
           $addr can be any of the following and possibly more...
             n.n
             n.n/mm
             n.n mm
             n.n.n
             n.n.n/mm
             n.n.n mm
             n.n.n.n
             n.n.n.n/mm            32 bit cidr notation
             n.n.n.n mm
             n.n.n.n/m.m.m.m
             n.n.n.n m.m.m.m
             loopback, localhost, broadcast, any, default
             x.x.x.x/host
             0xABCDEF, 0b111111000101011110, (or a bcd number)
             a netaddr as returned by 'inet_aton'
           Any RFC1884 notation
             ::n.n.n.n
             ::n.n.n.n/mmm         128 bit cidr notation
             ::n.n.n.n/::m.m.m.m
             ::x:x
             ::x:x/mmm
             x:x:x:x:x:x:x:x
             x:x:x:x:x:x:x:x/mmm
             x:x:x:x:x:x:x:x/m:m:m:m:m:m:m:m any RFC1884 notation
             loopback, localhost, unspecified, any, default
             ::x:x/host
             0xABCDEF, 0b111111000101011110 within the limits
             of perl's number resolution
             123456789012  a 'big' bcd number (bigger than perl likes)
             and Math::BigInt
           If called with no arguments, 'default' is assumed.
           If called with and empty string as the argument, 'undef' is
           returned;
       "->broadcast()"
           Returns a new object referring to the broadcast address of a given
           subnet. The broadcast address has all ones in all the bit positions
           where the netmask has zero bits. This is normally used to address
           all the hosts in a given subnet.
       "->network()"
           Returns a new object referring to the network address of a given
           subnet. A network address has all zero bits where the bits of the
           netmask are zero. Normally this is used to refer to a subnet.
       "->addr()"
           Returns a scalar with the address part of the object as an IPv4 or
           IPv6 text string as appropriate. This is useful for printing or for
           passing the address part of the NetAddr::IP::Lite object to other
           components that expect an IP address. If the object is an ipV6
           address or was created using ->new6($ip) it will be reported in
           ipV6 hex format otherwise it will be reported in dot quad format
           only if it resides in ipV4 address space.
       "->mask()"
           Returns a scalar with the mask as an IPv4 or IPv6 text string as
           described above.
       "->masklen()"
           Returns a scalar the number of one bits in the mask.
       "->bits()"
           Returns the width of the address in bits. Normally 32 for v4 and
           128 for v6.
       "->version()"
           Returns the version of the address or subnet. Currently this can be
           either 4 or 6.
       "->cidr()"
           Returns a scalar with the address and mask in CIDR notation. A
           NetAddr::IP::Lite object stringifies to the result of this
           function.  (see comments about ->new6() and ->addr() for output
           formats)
       "->aton()"
           Returns the address part of the NetAddr::IP::Lite object in the
           same format as the "inet_aton()" or "ipv6_aton" function
           respectively. If the object was created using ->new6($ip), the
           address returned will always be in ipV6 format, even for addresses
           in ipV4 address space.
       "->range()"
           Returns a scalar with the base address and the broadcast address
           separated by a dash and spaces. This is called range notation.
       "->numeric()"
           When called in a scalar context, will return a numeric
           representation of the address part of the IP address. When called
           in an array context, it returns a list of two elements. The first
           element is as described, the second element is the numeric
           representation of the netmask.
           This method is essential for serializing the representation of a
           subnet.
       "->bigint()"
           When called in a scalar context, will return a Math::BigInt
           representation of the address part of the IP address. When called
           in an array contest, it returns a list of two elements. The first
           element is as described, the second element is the Math::BigInt
           representation of the netmask.
       "$me->contains($other)"
           Returns true when $me completely contains $other. False is returned
           otherwise and "undef" is returned if $me and $other are not both
           "NetAddr::IP::Lite" objects.
       "$me->within($other)"
           The complement of "->contains()". Returns true when $me is
           completely contained within $other, undef if $me and $other are not
           both "NetAddr::IP::Lite" objects.
       C->is_rfc1918()>
           Returns true when $me is an RFC 1918 address.
                10.0.0.0        -   10.255.255.255  (10/8 prefix)
                172.16.0.0      -   172.31.255.255  (172.16/12 prefix)
                192.168.0.0     -   192.168.255.255 (192.168/16 prefix)
       "->first()"
           Returns a new object representing the first usable IP address
           within the subnet (ie, the first host address).
       "->last()"
           Returns a new object representing the last usable IP address within
           the subnet (ie, one less than the broadcast address).
       "->nth($index)"
           Returns a new object representing the n-th usable IP address within
           the subnet (ie, the n-th host address).  If no address is available
           (for example, when the network is too small for $index hosts),
           "undef" is returned.
           Version 4.00 of NetAddr::IP and version 1.00 of NetAddr::IP::Lite
           implements "->nth($index)" and "->num()" exactly as the
           documentation states.  Previous versions behaved slightly
           differently and not in a consistent manner.
           To use the old behavior for "->nth($index)" and "->num()":
             use NetAddr::IP::Lite qw(:old_nth);
             old behavior:
             NetAddr::IP->new('10/32')->nth(0) == undef
             NetAddr::IP->new('10/32')->nth(1) == undef
             NetAddr::IP->new('10/31')->nth(0) == undef
             NetAddr::IP->new('10/31')->nth(1) == 10.0.0.1/31
             NetAddr::IP->new('10/30')->nth(0) == undef
             NetAddr::IP->new('10/30')->nth(1) == 10.0.0.1/30
             NetAddr::IP->new('10/30')->nth(2) == 10.0.0.2/30
             NetAddr::IP->new('10/30')->nth(3) == 10.0.0.3/30
           Note that in each case, the broadcast address is represented in the
           output set and that the 'zero'th index is alway undef except for a
           point-to-point /31 or /127 network where there are exactly two
           addresses in the network.
             new behavior:
             NetAddr::IP->new('10/32')->nth(0)  == 10.0.0.0/32
             NetAddr::IP->new('10.1/32'->nth(0) == 10.0.0.1/32
             NetAddr::IP->new('10/31')->nth(0)  == 10.0.0.0/32
             NetAddr::IP->new('10/31')->nth(1)  == 10.0.0.1/32
             NetAddr::IP->new('10/30')->nth(0) == 10.0.0.1/30
             NetAddr::IP->new('10/30')->nth(1) == 10.0.0.2/30
             NetAddr::IP->new('10/30')->nth(2) == undef
           Note that a /32 net always has 1 usable address while a /31 has
           exactly two usable addresses for point-to-point addressing. The
           first index (0) returns the address immediately following the
           network address except for a /31 or /127 when it return the network
           address.
       "->num()"
           As of version 4.42 of NetAddr::IP and version 1.27 of
           NetAddr::IP::Lite a /31 and /127 with return a net num value of 2
           instead of 0 (zero) for point-to-point networks.
           Version 4.00 of NetAddr::IP and version 1.00 of NetAddr::IP::Lite
           return the number of usable IP addresses within the subnet, not
           counting the broadcast or network address.
           Previous versions worked only for ipV4 addresses, returned a
           maximum span of 2**32 and returned the number of IP addresses not
           counting the broadcast address.       (one greater than the new
           behavior)
           To use the old behavior for "->nth($index)" and "->num()":
             use NetAddr::IP::Lite qw(:old_nth);
           WARNING:
           NetAddr::IP will calculate and return a numeric string for network
           ranges as large as 2**128. These values are TEXT strings and perl
           can treat them as integers for numeric calculations.
           Perl on 32 bit platforms only handles integer numbers up to 2**32
           and on 64 bit platforms to 2**64.
           If you wish to manipulate numeric strings returned by NetAddr::IP
           that are larger than 2**32 or 2**64, respectively,  you must load
           additional modules such as Math::BigInt, bignum or some similar
           package to do the integer math.
EXPORT_OK
               Zeros
               Ones
               V4mask
               V4net
               :aton           DEPRECATED
               :old_nth
               :upper
               :lower
AUTHORS
       Luis E. Mun~oz <luismunoz AT cpan.org>, Michael Robinton
       <michael AT bizsystems.com>
WARRANTY
       This software comes with the  same warranty as perl itself (ie, none),
       so by using it you accept any and all the liability.
COPYRIGHT
        This software is (c) Luis E. Mun~oz, 1999 - 2005
        and (c) Michael Robinton, 2006 - 2012.
       All rights reserved.
       This program is free software; you can redistribute it and/or modify it
       under the terms of either:
         a) the GNU General Public License as published by the Free
         Software Foundation; either version 2, or (at your option) any
         later version, or
         b) the "Artistic License" which comes with this distribution.
       This program is distributed in the hope that it will be useful, but
       WITHOUT ANY WARRANTY; without even the implied warranty of
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See either the
       GNU General Public License or the Artistic License for more details.
       You should have received a copy of the Artistic License with this
       distribution, in the file named "Artistic".  If not, I'll be glad to
       provide one.
       You should also have received a copy of the GNU General Public License
       along with this program in the file named "Copying". If not, write to
       the
               Free Software Foundation, Inc.,
               51 Franklin Street, Fifth Floor
               Boston, MA 02110-1301 USA
       or visit their web page on the internet at:
               http://www.gnu.org/copyleft/gpl.html.
SEE ALSO
       NetAddr::IP(3), NetAddr::IP::Util(3), NetAddr::IP::InetBase(3)

perl v5.16.3                      2013-05-25                           Lite(3)