M4(1P) POSIX Programmer's Manual M4(1P)
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux
implementation of this interface may differ (consult the corresponding
Linux manual page for details of Linux behavior), or the interface may
not be implemented on Linux.
NAME
m4 -- macro processor
SYNOPSIS
m4 [-s] [-D name[=val]]... [-U name]... file...
DESCRIPTION
The m4 utility is a macro processor that shall read one or more text
files, process them according to their included macro statements, and
write the results to standard output.
OPTIONS
The m4 utility shall conform to the Base Definitions volume of
POSIX.1-2008, Section 12.2, Utility Syntax Guidelines, except that the
order of the -D and -U options shall be significant, and options can be
interspersed with operands.
The following options shall be supported:
-s Enable line synchronization output for the c99 preprocessor
phase (that is, #line directives).
-D name[=val]
Define name to val or to null if =val is omitted.
-U name Undefine name.
OPERANDS
The following operand shall be supported:
file A pathname of a text file to be processed. If no file is
given, or if it is '-', the standard input shall be read.
STDIN
The standard input shall be a text file that is used if no file operand
is given, or if it is '-'.
INPUT FILES
The input file named by the file operand shall be a text file.
ENVIRONMENT VARIABLES
The following environment variables shall affect the execution of m4:
LANG Provide a default value for the internationalization vari-
ables that are unset or null. (See the Base Definitions vol-
ume of POSIX.1-2008, Section 8.2, Internationalization Vari-
ables for the precedence of internationalization variables
used to determine the values of locale categories.)
LC_ALL If set to a non-empty string value, override the values of
all the other internationalization variables.
LC_CTYPE Determine the locale for the interpretation of sequences of
bytes of text data as characters (for example, single-byte as
opposed to multi-byte characters in arguments and input
files).
LC_MESSAGES
Determine the locale that should be used to affect the format
and contents of diagnostic messages written to standard
error.
NLSPATH Determine the location of message catalogs for the processing
of LC_MESSAGES.
ASYNCHRONOUS EVENTS
Default.
STDOUT
The standard output shall be the same as the input files, after being
processed for macro expansion.
STDERR
The standard error shall be used to display strings with the errprint
macro, macro tracing enabled by the traceon macro, the defined text for
macros written by the dumpdef macro, or for diagnostic messages.
OUTPUT FILES
None.
EXTENDED DESCRIPTION
The m4 utility shall compare each token from the input against the set
of built-in and user-defined macros. If the token matches the name of a
macro, then the token shall be replaced by the macro's defining text,
if any, and rescanned for matching macro names. Once no portion of the
token matches the name of a macro, it shall be written to standard out-
put. Macros may have arguments, in which case the arguments shall be
substituted into the defining text before it is rescanned.
Macro calls have the form:
name(arg1, arg2, ..., argn)
Macro names shall consist of letters, digits, and underscores, where
the first character is not a digit. Tokens not of this form shall not
be treated as macros.
The application shall ensure that the <left-parenthesis> immediately
follows the name of the macro. If a token matching the name of a macro
is not followed by a <left-parenthesis>, it is handled as a use of that
macro without arguments.
If a macro name is followed by a <left-parenthesis>, its arguments are
the <comma>-separated tokens between the <left-parenthesis> and the
matching <right-parenthesis>. Unquoted white-space characters preced-
ing each argument shall be ignored. All other characters, including
trailing white-space characters, are retained. <comma> characters
enclosed between <left-parenthesis> and <right-parenthesis> characters
do not delimit arguments.
Arguments are positionally defined and referenced. The string "$1" in
the defining text shall be replaced by the first argument. Systems
shall support at least nine arguments; only the first nine can be ref-
erenced, using the strings "$1" to "$9", inclusive. The string "$0" is
replaced with the name of the macro. The string "$#" is replaced by the
number of arguments as a string. The string "$*" is replaced by a list
of all of the arguments, separated by <comma> characters. The string
"$@" is replaced by a list of all of the arguments separated by <comma>
characters, and each argument is quoted using the current left and
right quoting strings. The string "${" produces unspecified behavior.
If fewer arguments are supplied than are in the macro definition, the
omitted arguments are taken to be null. It is not an error if more
arguments are supplied than are in the macro definition.
No special meaning is given to any characters enclosed between matching
left and right quoting strings, but the quoting strings are themselves
discarded. By default, the left quoting string consists of a grave
accent (backquote) and the right quoting string consists of an acute
accent (single-quote); see also the changequote macro.
Comments are written but not scanned for matching macro names; by
default, the begin-comment string consists of the <number-sign> charac-
ter and the end-comment string consists of a <newline>. See also the
changecom and dnl macros.
The m4 utility shall make available the following built-in macros. They
can be redefined, but once this is done the original meaning is lost.
Their values shall be null unless otherwise stated. In the descriptions
below, the term defining text refers to the value of the macro: the
second argument to the define macro, among other things. Except for the
first argument to the eval macro, all numeric arguments to built-in
macros shall be interpreted as decimal values. The string values pro-
duced as the defining text of the decr, divnum, incr, index, len, and
sysval built-in macros shall be in the form of a decimal-constant as
defined in the C language.
changecom The changecom macro shall set the begin-comment and end-com-
ment strings. With no arguments, the comment mechanism shall
be disabled. With a single non-null argument, that argument
shall become the begin-comment and the <newline> shall become
the end-comment string. With two non-null arguments, the
first argument shall become the begin-comment string and the
second argument shall become the end-comment string. The
behavior is unspecified if either argument is provided but
null. Systems shall support comment strings of at least five
characters.
changequote
The changequote macro shall set the begin-quote and end-quote
strings. With no arguments, the quote strings shall be set to
the default values (that is, `'). The behavior is unspecified
if there is a single argument or either argument is null.
With two non-null arguments, the first argument shall become
the begin-quote string and the second argument shall become
the end-quote string. Systems shall support quote strings of
at least five characters.
decr The defining text of the decr macro shall be its first argu-
ment decremented by 1. It shall be an error to specify an
argument containing any non-numeric characters. The behavior
is unspecified if decr is not immediately followed by a
<left-parenthesis>.
define The second argument shall become the defining text of the
macro whose name is the first argument. It is unspecified
whether the define macro deletes all prior definitions of the
macro named by its first argument or preserves all but the
current definition of the macro. The behavior is unspecified
if define is not immediately followed by a <left-parenthe-
sis>.
defn The defining text of the defn macro shall be the quoted defi-
nition (using the current quoting strings) of its arguments.
The behavior is unspecified if defn is not immediately fol-
lowed by a <left-parenthesis>.
divert The m4 utility maintains nine temporary buffers, numbered 1
to 9, inclusive. When the last of the input has been pro-
cessed, any output that has been placed in these buffers
shall be written to standard output in buffer-numerical
order. The divert macro shall divert future output to the
buffer specified by its argument. Specifying no argument or
an argument of 0 shall resume the normal output process. Out-
put diverted to a stream with a negative number shall be dis-
carded. Behavior is implementation-defined if a stream number
larger than 9 is specified. It shall be an error to specify
an argument containing any non-numeric characters.
divnum The defining text of the divnum macro shall be the number of
the current output stream as a string.
dnl The dnl macro shall cause m4 to discard all input characters
up to and including the next <newline>.
dumpdef The dumpdef macro shall write the defined text to standard
error for each of the macros specified as arguments, or, if
no arguments are specified, for all macros.
errprint The errprint macro shall write its arguments to standard
error. The behavior is unspecified if errprint is not immedi-
ately followed by a <left-parenthesis>.
eval The eval macro shall evaluate its first argument as an arith-
metic expression, using signed integer arithmetic with at
least 32-bit precision. At least the following C-language
operators shall be supported, with precedence, associativity,
and behavior as described in Section 1.1.2.1, Arithmetic Pre-
cision and Operations:
()
unary +
unary -
~
!
binary *
/
%
binary +
binary -
<<
>>
<
<=
>
>=
==
!=
binary &
^
|
&&
||
Systems shall support octal and hexadecimal numbers as in the
ISO C standard. The second argument, if specified, shall set
the radix for the result; if the argument is blank or unspec-
ified, the default is 10. Behavior is unspecified if the
radix falls outside the range 2 to 36, inclusive. The third
argument, if specified, sets the minimum number of digits in
the result. Behavior is unspecified if the third argument is
less than zero. It shall be an error to specify the second or
third argument containing any non-numeric characters. The
behavior is unspecified if eval is not immediately followed
by a <left-parenthesis>.
ifdef If the first argument to the ifdef macro is defined, the
defining text shall be the second argument. Otherwise, the
defining text shall be the third argument, if specified, or
the null string, if not. The behavior is unspecified if ifdef
is not immediately followed by a <left-parenthesis>.
ifelse The ifelse macro takes three or more arguments. If the first
two arguments compare as equal strings (after macro expansion
of both arguments), the defining text shall be the third
argument. If the first two arguments do not compare as equal
strings and there are three arguments, the defining text
shall be null. If the first two arguments do not compare as
equal strings and there are four or five arguments, the
defining text shall be the fourth argument. If the first two
arguments do not compare as equal strings and there are six
or more arguments, the first three arguments shall be dis-
carded and processing shall restart with the remaining argu-
ments. The behavior is unspecified if ifelse is not immedi-
ately followed by a <left-parenthesis>.
include The defining text for the include macro shall be the contents
of the file named by the first argument. It shall be an error
if the file cannot be read. The behavior is unspecified if
include is not immediately followed by a <left-parenthesis>.
incr The defining text of the incr macro shall be its first argu-
ment incremented by 1. It shall be an error to specify an
argument containing any non-numeric characters. The behavior
is unspecified if incr is not immediately followed by a
<left-parenthesis>.
index The defining text of the index macro shall be the first char-
acter position (as a string) in the first argument where a
string matching the second argument begins (zero origin), or
-1 if the second argument does not occur. The behavior is
unspecified if index is not immediately followed by a <left-
parenthesis>.
len The defining text of the len macro shall be the length (as a
string) of the first argument. The behavior is unspecified
if len is not immediately followed by a <left-parenthesis>.
m4exit Exit from the m4 utility. If the first argument is specified,
it is the exit code. The default is zero. It shall be an
error to specify an argument containing any non-numeric char-
acters.
m4wrap The first argument shall be processed when EOF is reached. If
the m4wrap macro is used multiple times, the arguments speci-
fied shall be processed in the order in which the m4wrap
macros were processed. The behavior is unspecified if m4wrap
is not immediately followed by a <left-parenthesis>.
maketemp The defining text shall be the first argument, with any
trailing 'X' characters replaced with the current process ID
as a string. The behavior is unspecified if maketemp is not
immediately followed by a <left-parenthesis>.
mkstemp The first argument shall be taken as a template for creating
an empty file, with trailing 'X' characters replaced with
characters from the portable filename character set. The
behavior is unspecified if the first argument does not end in
at least six 'X' characters. If a temporary file is success-
fully created, then the defining text of the macro shall be
the name of the new file. The user ID of the file shall be
set to the effective user ID of the process. The group ID of
the file shall be set to the group ID of the file's parent
directory or to the effective group ID of the process. The
file access permission bits are set such that only the owner
can both read and write the file, regardless of the current
umask of the process. If a file could not be created, the
defining text of the macro shall be the empty string. The
behavior is unspecified if mkstemp is not immediately fol-
lowed by a <left-parenthesis>.
popdef The popdef macro shall delete the current definition of its
arguments, replacing that definition with the previous one.
If there is no previous definition, the macro is undefined.
The behavior is unspecified if popdef is not immediately fol-
lowed by a <left-parenthesis>.
pushdef The pushdef macro shall be equivalent to the define macro
with the exception that it shall preserve any current defini-
tion for future retrieval using the popdef macro. The behav-
ior is unspecified if pushdef is not immediately followed by
a <left-parenthesis>.
shift The defining text for the shift macro shall be a comma-sepa-
rated list of its arguments except the first one. Each argu-
ment shall be quoted using the current quoting strings. The
behavior is unspecified if shift is not immediately followed
by a <left-parenthesis>.
sinclude The sinclude macro shall be equivalent to the include macro,
except that it shall not be an error if the file is inacces-
sible. The behavior is unspecified if sinclude is not imme-
diately followed by a <left-parenthesis>.
substr The defining text for the substr macro shall be the substring
of the first argument beginning at the zero-offset character
position specified by the second argument. The third argu-
ment, if specified, shall be the number of characters to
select; if not specified, the characters from the starting
point to the end of the first argument shall become the
defining text. It shall not be an error to specify a starting
point beyond the end of the first argument and the defining
text shall be null. It shall be an error to specify an argu-
ment containing any non-numeric characters. The behavior is
unspecified if substr is not immediately followed by a <left-
parenthesis>.
syscmd The syscmd macro shall interpret its first argument as a
shell command line. The defining text shall be the string
result of that command. The string result shall not be res-
canned for macros while setting the defining text. No output
redirection shall be performed by the m4 utility. The exit
status value from the command can be retrieved using the sys-
val macro. The behavior is unspecified if syscmd is not imme-
diately followed by a <left-parenthesis>.
sysval The defining text of the sysval macro shall be the exit value
of the utility last invoked by the syscmd macro (as a
string).
traceon The traceon macro shall enable tracing for the macros speci-
fied as arguments, or, if no arguments are specified, for all
macros. The trace output shall be written to standard error
in an unspecified format.
traceoff The traceoff macro shall disable tracing for the macros spec-
ified as arguments, or, if no arguments are specified, for
all macros.
translit The defining text of the translit macro shall be the first
argument with every character that occurs in the second argu-
ment replaced with the corresponding character from the third
argument. If no replacement character is specified for some
source character because the second argument is longer than
the third argument, that character shall be deleted from the
first argument in translit's defining text. The behavior is
unspecified if the '-' character appears within the second or
third argument anywhere besides the first or last character.
The behavior is unspecified if the same character appears
more than once in the second argument. The behavior is
unspecified if translit is not immediately followed by a
<left-parenthesis>.
undefine The undefine macro shall delete all definitions (including
those preserved using the pushdef macro) of the macros named
by its arguments. The behavior is unspecified if undefine is
not immediately followed by a <left-parenthesis>.
undivert The undivert macro shall cause immediate output of any text
in temporary buffers named as arguments, or all temporary
buffers if no arguments are specified. Buffers can be undi-
verted into other temporary buffers. Undiverting shall dis-
card the contents of the temporary buffer. The behavior is
unspecified if an argument contains any non-numeric charac-
ters.
EXIT STATUS
The following exit values shall be returned:
0 Successful completion.
>0 An error occurred
If the m4exit macro is used, the exit value can be specified by the
input file.
CONSEQUENCES OF ERRORS
Default.
The following sections are informative.
APPLICATION USAGE
The defn macro is useful for renaming macros, especially built-ins.
Since eval defers to the ISO C standard, some operations have undefined
behavior. In some implementations, division or remainder by zero cause
a fatal signal, even if the division occurs on the short-circuited
branch of "&&" or "||". Any operation that overflows in signed arith-
metic produces undefined behavior. Likewise, using the shift operators
with a shift amount that is not positive and smaller than the precision
is undefined, as is shifting a negative number to the right. Histori-
cally, not all implementations obeyed C-language precedence rules: '~'
and '!' were lower than '=='; '==' and '!=' were not lower than '<';
and '|' was not lower than '^'; the liberal use of "()" can force the
desired precedence even with these non-compliant implementations. Fur-
thermore, some traditional implementations treated '^' as an exponenti-
ation operator, although most implementations now use "**" as an exten-
sion for this purpose.
When a macro has been multiply defined via the pushdef macro, it is
unspecified whether the define macro will alter only the most recent
definition (as though by popdef and pushdef), or replace the entire
stack of definitions with a single definition (as though by undefine
and pushdef). An application desiring particular behavior for the
define macro in this case can redefine it accordingly.
Applications should use the mkstemp macro instead of the obsolescent
maketemp macro for creating temporary files.
EXAMPLES
If the file m4src contains the lines:
The value of `VER' is "VER".
ifdef(`VER', ``VER'' is defined to be VER., VER is not defined.)
ifelse(VER, 1, ``VER'' is `VER'.)
ifelse(VER, 2, ``VER'' is `VER'., ``VER'' is not 2.)
end
then the command
m4 m4src
or the command:
m4 -U VER m4src
produces the output:
The value of VER is "VER".
VER is not defined.
VER is not 2.
end
The command:
m4 -D VER m4src
produces the output:
The value of VER is "".
VER is defined to be .
VER is not 2.
end
The command:
m4 -D VER=1 m4src
produces the output:
The value of VER is "1".
VER is defined to be 1.
VER is 1.
VER is not 2.
end
The command:
m4 -D VER=2 m4src
produces the output:
The value of VER is "2".
VER is defined to be 2.
VER is 2.
end
RATIONALE
Historic System V-based behavior treated "${" in a macro definition as
two literal characters. However, this sequence is left unspecified so
that implementations may offer extensions such as "${11}" meaning the
eleventh positional parameter. Macros can still be defined with appro-
priate uses of nested quoting to result in a literal "${" in the output
after rescanning removes the nested quotes.
In the translit built-in, historic System V-based behavior treated '-'
as a literal; GNU behavior treats it as a range. This version of the
standard allows either behavior.
FUTURE DIRECTIONS
None.
SEE ALSO
c99
The Base Definitions volume of POSIX.1-2008, Chapter 8, Environment
Variables, Section 12.2, Utility Syntax Guidelines
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2013 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 7, Copyright (C) 2013 by the Institute of Electri-
cal and Electronics Engineers, Inc and The Open Group. (This is
POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document. The original Standard can be obtained online
at http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are
most likely to have been introduced during the conversion of the source
files to man page format. To report such errors, see https://www.ker-
nel.org/doc/man-pages/reporting_bugs.html .
IEEE/The Open Group 2013 M4(1P)
Linux-Distributionen
Huschi als Linux-Admin