zip(1) - phpMan

ZIP(1L)                                                                ZIP(1L)

NAME
       zip - package and compress (archive) files
SYNOPSIS
       zip  [-aABcdDeEfFghjklLmoqrRSTuvVwXyz!@$] [--longoption ...]  [-b path]
       [-n suffixes] [-t date] [-tt date] [zipfile [file ...]]  [-xi list]
       zipcloak (see separate man page)
       zipnote (see separate man page)
       zipsplit (see separate man page)
       Note:  Command line processing in zip has been changed to support  long
       options  and  handle all options and arguments more consistently.  Some
       old command lines that depend on command line  inconsistencies  may  no
       longer work.
DESCRIPTION
       zip  is  a compression and file packaging utility for Unix, VMS, MSDOS,
       OS/2, Windows 9x/NT/XP, Minix, Atari, Macintosh, Amiga, and Acorn  RISC
       OS.   It  is analogous to a combination of the Unix commands tar(1) and
       compress(1) and is compatible with PKZIP (Phil  Katz's  ZIP  for  MSDOS
       systems).
       A  companion  program  (unzip(1L))  unpacks  zip archives.  The zip and
       unzip(1L) programs can work with archives produced by PKZIP (supporting
       most PKZIP features up to PKZIP version 4.6), and PKZIP and PKUNZIP can
       work with archives produced  by  zip  (with  some  exceptions,  notably
       streamed  archives,  but  recent  changes  in the zip file standard may
       facilitate better compatibility).  zip version 3.0 is  compatible  with
       PKZIP  2.04  and  also supports the Zip64 extensions of PKZIP 4.5 which
       allow archives as well as files to exceed the previous 2 GB limit (4 GB
       in  some  cases).  zip also now supports bzip2 compression if the bzip2
       library is included when zip is compiled.  Note that PKUNZIP 1.10  can-
       not extract files produced by PKZIP 2.04 or zip 3.0. You must use PKUN-
       ZIP 2.04g or unzip 5.0p1 (or later versions) to extract them.
       See the EXAMPLES section at the bottom of this  page  for  examples  of
       some typical uses of zip.
       Large Archives and Zip64.   zip automatically uses the Zip64 extensions
       when files larger than 4 GB are added to an archive,  an  archive  con-
       taining  Zip64 entries is updated (if the resulting archive still needs
       Zip64), the size of the archive will exceed 4 GB, or when the number of
       entries  in  the archive will exceed about 64K.  Zip64 is also used for
       archives streamed from standard input as the size of such archives  are
       not  known  in advance, but the option -fz- can be used to force zip to
       create PKZIP 2 compatible archives (as long as Zip64 extensions are not
       needed).   You must use a PKZIP 4.5 compatible unzip, such as unzip 6.0
       or later, to extract files using the Zip64 extensions.
       In addition, streamed archives, entries encrypted with standard encryp-
       tion,  or  split archives created with the pause option may not be com-
       patible with PKZIP as data descriptors are used and PKZIP at  the  time
       of  this  writing does not support data descriptors (but recent changes
       in the PKWare published zip standard now include some support  for  the
       data descriptor format zip uses).

       Mac  OS  X.   Though  previous Mac versions had their own zip port, zip
       supports Mac OS X as part of the  Unix  port  and  most  Unix  features
       apply.   References  to "MacOS" below generally refer to MacOS versions
       older than OS X.  Support for some Mac OS features in the Unix Mac OS X
       port, such as resource forks, is expected in the next zip release.

       For  a  brief  help  on  zip and unzip, run each without specifying any
       parameters on the command line.

USE
       The program is useful for packaging a set of  files  for  distribution;
       for archiving files; and for saving disk space by temporarily compress-
       ing unused files or directories.
       The zip program puts one or more compressed files into a single zip ar-
       chive,  along  with information about the files (name, path, date, time
       of last modification, protection, and check information to verify  file
       integrity).  An entire directory structure can be packed into a zip ar-
       chive with a single command.  Compression ratios of 2:1 to 3:1 are com-
       mon for text files.  zip has one compression method (deflation) and can
       also store files without compression.  (If bzip2 support is added,  zip
       can  also  compress using bzip2 compression, but such entries require a
       reasonably modern unzip  to  decompress.   When  bzip2  compression  is
       selected,  it replaces deflation as the default method.)  zip automati-
       cally chooses the better of the two (deflation or store or, if bzip2 is
       selected, bzip2 or store) for each file to be compressed.
       Command format.  The basic command format is
              zip options archive inpath inpath ...
       where  archive  is a new or existing zip archive and inpath is a direc-
       tory or file path optionally including wildcards.  When given the  name
       of  an existing zip archive, zip will replace identically named entries
       in the zip archive (matching the relative names as stored  in  the  ar-
       chive)  or  add  entries for new names.  For example, if foo.zip exists
       and contains foo/file1 and foo/file2, and the  directory  foo  contains
       the files foo/file1 and foo/file3, then:
              zip -r foo.zip foo
       or more concisely
              zip -r foo foo
       will  replace foo/file1 in foo.zip and add foo/file3 to foo.zip.  After
       this,  foo.zip  contains  foo/file1,  foo/file2,  and  foo/file3,  with
       foo/file2 unchanged from before.
       So if before the zip command is executed foo.zip has:
               foo/file1 foo/file2
       and directory foo has:
               file1 file3
       then foo.zip will have:
               foo/file1 foo/file2 foo/file3
       where foo/file1 is replaced and foo/file3 is new.
       -@ file lists.   If  a file list is specified as -@ [Not on MacOS], zip
       takes the list of input files from standard input instead of  from  the
       command line.  For example,
              zip -@ foo
       will store the files listed one per line on stdin in foo.zip.
       Under  Unix,  this option can be used to powerful effect in conjunction
       with the find (1) command.  For example, to archive all  the  C  source
       files in the current directory and its subdirectories:
              find . -name "*.[ch]" -print | zip source -@
       (note  that the pattern must be quoted to keep the shell from expanding
       it).
       Streaming input and output.  zip will also accept a single  dash  ("-")
       as the zip file name, in which case it will write the zip file to stan-
       dard output, allowing the output to be piped to  another  program.  For
       example:
              zip -r - . | dd of=/dev/nrst0 obs=16k
       would  write the zip output directly to a tape with the specified block
       size for the purpose of backing up the current directory.
       zip also accepts a single dash ("-") as the name of a file to  be  com-
       pressed,  in  which  case  it  will  read the file from standard input,
       allowing zip to take input from another program. For example:
              tar cf - . | zip backup -
       would compress the output of the tar command for the purpose of backing
       up  the  current  directory. This generally produces better compression
       than the previous example using the -r  option  because  zip  can  take
       advantage of redundancy between files. The backup can be restored using
       the command
              unzip -p backup | tar xf -
       When no zip file name is given and stdout is not a terminal,  zip  acts
       as  a filter, compressing standard input to standard output.  For exam-
       ple,
              tar cf - . | zip | dd of=/dev/nrst0 obs=16k
       is equivalent to
              tar cf - . | zip - - | dd of=/dev/nrst0 obs=16k
       zip archives created in this manner can be extracted with  the  program
       funzip  which  is  provided in the unzip package, or by gunzip which is
       provided in the gzip package (but some gunzip may not support  this  if
       zip used the Zip64 extensions). For example:
              dd if=/dev/nrst0  ibs=16k | funzip | tar xvf -
       The stream can also be saved to a file and unzip used.
       If  Zip64  support  for  large files and archives is enabled and zip is
       used as a filter, zip creates a Zip64 archive that requires a PKZIP 4.5
       or  later compatible unzip to read it.  This is to avoid amgibuities in
       the zip file structure as defined in the current zip  standard  (PKWARE
       AppNote)  where  the decision to use Zip64 needs to be made before data
       is written for the entry, but for a stream the size of the data is  not
       known at that point.  If the data is known to be smaller than 4 GB, the
       option -fz- can be used to prevent use of Zip64, but zip will exit with
       an  error if Zip64 was in fact needed.  zip 3 and unzip 6 and later can
       read archives with Zip64 entries.  Also, zip removes the  Zip64  exten-
       sions  if  not  needed  when  archive  entries  are  copied (see the -U
       (--copy) option).
       When directing the output to another file, note that all options should
       be before the redirection including -x.  For example:
              zip archive "*.h" "*.c" -x donotinclude.h orthis.h > tofile
       Zip files.   When  changing  an  existing zip archive, zip will write a
       temporary file with the new contents, and only replace the old one when
       the  process  of  creating  the  new version has been completed without
       error.
       If the name of the zip archive  does  not  contain  an  extension,  the
       extension  .zip  is  added.  If  the name already contains an extension
       other than .zip, the existing extension is  kept  unchanged.   However,
       split  archives  (archives  split over multiple files) require the .zip
       extension on the last split.
       Scanning and reading files.  When zip starts, it  scans  for  files  to
       process  (if  needed).  If this scan takes longer than about 5 seconds,
       zip will display  a  "Scanning  files"  message  and  start  displaying
       progress  dots  every  2  seconds  or  every so many entries processed,
       whichever takes longer.  If there is more than 2 seconds  between  dots
       it  could indicate that finding each file is taking time and could mean
       a slow network connection for example.  (Actually the initial file scan
       is  a  two-step  process where the directory scan is followed by a sort
       and these two steps are separated with a space in the dots.  If  updat-
       ing an existing archive, a space also appears between the existing file
       scan and the new file scan.)  The scanning  files  dots  are  not  con-
       trolled  by the -ds dot size option, but the dots are turned off by the
       -q quiet option.  The -sf show files option can be  used  to  scan  for
       files  and  get  the  list of files scanned without actually processing
       them.
       If zip is not able to read a file, it issues a warning  but  continues.
       See  the -MM option below for more on how zip handles patterns that are
       not matched and files that  are  not  readable.   If  some  files  were
       skipped, a warning is issued at the end of the zip operation noting how
       many files were read and how many skipped.
       Command modes.  zip now supports two distinct types of  command  modes,
       external  and  internal.  The external modes (add, update, and freshen)
       read files from the file system (as well as from an  existing  archive)
       while  the  internal  modes  (delete  and  copy) operate exclusively on
       entries in an existing archive.
       add
              Update existing entries and add new files.  If the archive  does
              not exist create it.  This is the default mode.
       update (-u)
              Update  existing entries if newer on the file system and add new
              files.  If the archive does not exist issue warning then  create
              a new archive.
       freshen (-f)
              Update  existing entries of an archive if newer on the file sys-
              tem.  Does not add new files to the archive.
       delete (-d)
              Select entries in an existing archive and delete them.
       copy (-U)
              Select entries in an existing archive and copy them to a new ar-
              chive.  This new mode is similar to update but command line pat-
              terns select entries in the existing archive rather  than  files
              from  the  file system and it uses the --out option to write the
              resulting archive to a new file rather than update the  existing
              archive, leaving the original archive unchanged.
       The new File Sync option (-FS) is also considered a new mode, though it
       is similar to update.  This mode  synchronizes  the  archive  with  the
       files  on  the OS, only replacing files in the archive if the file time
       or size of the OS file is different, adding  new  files,  and  deleting
       entries from the archive where there is no matching file.  As this mode
       can delete entries from the archive, consider making a backup  copy  of
       the archive.
       Also see -DF for creating difference archives.
       See  each option description below for details and the EXAMPLES section
       below for examples.
       Split archives.  zip version 3.0 and later can create  split  archives.
       A  split  archive  is a standard zip archive split over multiple files.
       (Note that split archives are not just archives split in to pieces,  as
       the  offsets of entries are now based on the start of each split.  Con-
       catenating the pieces together will invalidate these offsets, but unzip
       can  usually  deal  with it.  zip will usually refuse to process such a
       spliced archive unless the -FF fix option is used to fix the offsets.)
       One use of split archives is storing a large archive on multiple remov-
       able media.  For a split archive with 20 split files the files are typ-
       ically named (replace ARCHIVE  with  the  name  of  your  archive)  AR-
       CHIVE.z01,  ARCHIVE.z02,  ..., ARCHIVE.z19, ARCHIVE.zip.  Note that the
       last file is the .zip file.  In  contrast,  spanned  archives  are  the
       original  multi-disk archive generally requiring floppy disks and using
       volume labels to store disk numbers.  zip supports split  archives  but
       not  spanned  archives,  though a procedure exists for converting split
       archives of the right size to spanned archives.  The  reverse  is  also
       true,  where  each  file of a spanned archive can be copied in order to
       files with the above names to create a split archive.
       Use -s to set the split size and create a split archive.  The  size  is
       given as a number followed optionally by one of k (kB), m (MB), g (GB),
       or t (TB) (the default is m).  The -sp option can be used to pause  zip
       between splits to allow changing removable media, for example, but read
       the descriptions and warnings for both -s and -sp below.
       Though zip does not update split archives, zip provides the new  option
       -O  (--output-file  or --out) to allow split archives to be updated and
       saved in a new archive.  For example,
              zip inarchive.zip foo.c bar.c --out outarchive.zip
       reads archive inarchive.zip, even if split, adds the  files  foo.c  and
       bar.c,  and  writes  the resulting archive to outarchive.zip.  If inar-
       chive.zip is split then outarchive.zip defaults to the same split size.
       Be  aware  that  if outarchive.zip and any split files that are created
       with it already exist, these are always overwritten as  needed  without
       warning.  This may be changed in the future.
       Unicode.   Though the zip standard requires storing paths in an archive
       using a specific character set, in practice zips have stored  paths  in
       archives in whatever the local character set is.  This creates problems
       when an archive is created or updated on a system using  one  character
       set  and  then  extracted on another system using a different character
       set.  When compiled with Unicode support enabled on platforms that sup-
       port wide characters, zip now stores, in addition to the standard local
       path for backward compatibility, the UTF-8  translation  of  the  path.
       This  provides  a common universal character set for storing paths that
       allows these paths to be fully extracted on other systems that  support
       Unicode and to match as close as possible on systems that don't.
       On  Win32 systems where paths are internally stored as Unicode but rep-
       resented in the local character set, it's possible that some paths will
       be  skipped during a local character set directory scan.  zip with Uni-
       code support now can read and store these paths.  Note that Win 9x sys-
       tems and FAT file systems don't fully support Unicode.
       Be aware that console windows on Win32 and Unix, for example, sometimes
       don't accurately show all characters due to how each  operating  system
       switches  in character sets for display.  However, directory navigation
       tools should show the correct paths if the needed fonts are loaded.
       Command line format.  This version of zip has updated command line pro-
       cessing and support for long options.
       Short options take the form
              -s[-][s[-]...][value][=value][ value]
       where  s  is  a one or two character short option.  A short option that
       takes a value is last in an argument and anything after it is taken  as
       the  value.   If  the option can be negated and "-" immediately follows
       the option, the option is negated.  Short options can also be given  as
       separate arguments
              -s[-][value][=value][ value] -s[-][value][=value][ value] ...
       Short  options  in general take values either as part of the same argu-
       ment or as the following argument.  An optional =  is  also  supported.
       So
              -ttmmddyyyy
       and
              -tt=mmddyyyy
       and
              -tt mmddyyyy
       all  work.   The  -x  and  -i  options accept lists of values and use a
       slightly different format described below.  See the -x and -i options.
       Long options take the form
              --longoption[-][=value][ value]
       where the option starts with --, has a multicharacter name, can include
       a  trailing  dash to negate the option (if the option supports it), and
       can have a value (option argument) specified by preceeding  it  with  =
       (no spaces).  Values can also follow the argument.  So
              --before-date=mmddyyyy
       and
              --before-date mmddyyyy
       both work.
       Long option names can be shortened to the shortest unique abbreviation.
       See the option descriptions below for which support long  options.   To
       avoid confusion, avoid abbreviating a negatable option with an embedded
       dash ("-") at the dash if you plan to negate it (the parser would  con-
       sider  a  trailing  dash,  such  as  for the option --some-option using
       --some- as the option, as part of  the  name  rather  than  a  negating
       dash).   This  may  be  changed to force the last dash in --some- to be
       negating in the future.
OPTIONS
       -a
       --ascii
              [Systems using EBCDIC] Translate file to ASCII format.

       -A
       --adjust-sfx
              Adjust self-extracting executable  archive.   A  self-extracting
              executable  archive  is created by prepending the SFX stub to an
              existing archive. The -A option tells zip to  adjust  the  entry
              offsets  stored in the archive to take into account this "pream-
              ble" data.
       Note: self-extracting archives for the Amiga are a  special  case.   At
       present, only the Amiga port of zip is capable of adjusting or updating
       these without corrupting them. -J can be used to remove the SFX stub if
       other updates need to be made.

       -AC
       --archive-clear
              [WIN32]   Once  archive  is  created  (and tested if -T is used,
              which is recommended), clear the  archive  bits  of  files  pro-
              cessed.   WARNING:  Once  the bits are cleared they are cleared.
              You may want to use the -sf show files option to store the  list
              of  files  processed  in  case  the  archive  operation  must be
              repeated.  Also consider using the -MM must  match  option.   Be
              sure to check out -DF as a possibly better way to do incremental
              backups.

       -AS
       --archive-set
              [WIN32]  Only include files  that  have  the  archive  bit  set.
              Directories  are  not stored when -AS is used, though by default
              the paths of entries, including directories, are stored as usual
              and can be used by most unzips to recreate directories.
              The  archive  bit  is set by the operating system when a file is
              modified and, if used with -AC, -AS can provide  an  incremental
              backup  capability.   However, other applications can modify the
              archive bit and it may not be  a  reliable  indicator  of  which
              files  have  changed since the last archive operation.  Alterna-
              tive ways to create incremental backups are using -t to use file
              dates,  though  this won't catch old files copied to directories
              being archived, and -DF to create a differential archive.

       -B
       --binary
              [VM/CMS and MVS] force file to be read binary (default is text).

       -Bn    [TANDEM] set Edit/Enscribe formatting options with n defined as
              bit  0: Don't add delimiter (Edit/Enscribe)
              bit  1: Use LF rather than CR/LF as delimiter (Edit/Enscribe)
              bit  2: Space fill record to maximum record length (Enscribe)
              bit  3: Trim trailing space (Enscribe)
              bit  8: Force 30K (Expand) large read for unstructured files

       -b path
       --temp-path path
              Use the specified path for the temporary zip archive. For  exam-
              ple:
                     zip -b /tmp stuff *
              will  put the temporary zip archive in the directory /tmp, copy-
              ing over stuff.zip to the  current  directory  when  done.  This
              option  is useful when updating an existing archive and the file
              system containing this old archive does not have enough space to
              hold both old and new archives at the same time.  It may also be
              useful when streaming in some cases to avoid the need  for  data
              descriptors.   Note  that using this option may require zip take
              additional time to copy the archive file when done to the desti-
              nation file system.

       -c
       --entry-comments
              Add  one-line  comments for each file.  File operations (adding,
              updating) are done first, and the user is then  prompted  for  a
              one-line  comment  for each file.  Enter the comment followed by
              return, or just return for no comment.

       -C
       --preserve-case
              [VMS]  Preserve case all on VMS.   Negating  this  option  (-C-)
              downcases.

       -C2
       --preserve-case-2
              [VMS]   Preserve  case ODS2 on VMS.  Negating this option (-C2-)
              downcases.

       -C5
       --preserve-case-5
              [VMS]  Preserve case ODS5 on VMS.  Negating this  option  (-C5-)
              downcases.

       -d
       --delete
              Remove (delete) entries from a zip archive.  For example:
                     zip -d foo foo/tom/junk foo/harry/\* \*.o
              will  remove the entry foo/tom/junk, all of the files that start
              with foo/harry/, and all of the files that end with .o  (in  any
              path).   Note  that  shell pathname expansion has been inhibited
              with backslashes, so that zip can see  the  asterisks,  enabling
              zip  to  match on the contents of the zip archive instead of the
              contents of the current directory.   (The  backslashes  are  not
              used  on  MSDOS-based platforms.)  Can also use quotes to escape
              the asterisks as in
                     zip -d foo foo/tom/junk "foo/harry/*" "*.o"
              Not escaping the asterisks on a system where the  shell  expands
              wildcards  could  result  in  the asterisks being converted to a
              list of files in the current directory and  that  list  used  to
              delete entries from the archive.
              Under  MSDOS,  -d is case sensitive when it matches names in the
              zip archive.  This requires that file names be entered in  upper
              case  if they were zipped by PKZIP on an MSDOS system.  (We con-
              sidered making this case insensitive on systems where paths were
              case  insensitive,  but  it  is possible the archive came from a
              system where case does matter and the archive could include both
              Bar  and bar as separate files in the archive.)  But see the new
              option -ic to ignore case in the archive.

       -db
       --display-bytes
              Display running byte counts showing the  bytes  zipped  and  the
              bytes to go.

       -dc
       --display-counts
              Display running count of entries zipped and entries to go.

       -dd
       --display-dots
              Display  dots  while  each entry is zipped (except on ports that
              have their own progress indicator).  See -ds below  for  setting
              dot  size.   The default is a dot every 10 MB of input file pro-
              cessed.  The -v option also displays dots (previously at a  much
              higher  rate  than  this  but now -v also defaults to 10 MB) and
              this rate is also controlled by -ds.

       -df
       --datafork
              [MacOS] Include only data-fork of files zipped into the archive.
              Good   for   exporting   files   to  foreign  operating-systems.
              Resource-forks will be ignored at all.

       -dg
       --display-globaldots
              Display progress dots for the archive instead of for each  file.
              The command
                         zip -qdgds 10m
              will turn off most output except dots every 10 MB.

       -ds size
       --dot-size size
              Set  amount of input file processed for each dot displayed.  See
              -dd to enable displaying dots.  Setting this option implies -dd.
              Size  is  in the format nm where n is a number and m is a multi-
              plier.  Currently m can be k (KB), m (MB), g (GB), or t (TB), so
              if n is 100 and m is k, size would be 100k which is 100 KB.  The
              default is 10 MB.
              The -v option also displays dots and now defaults to 10 MB also.
              This  rate is also controlled by this option.  A size of 0 turns
              dots off.
              This option does not control the dots from the "Scanning  files"
              message  as zip scans for input files.  The dot size for that is
              fixed at 2 seconds or a fixed number of  entries,  whichever  is
              longer.

       -du
       --display-usize
              Display the uncompressed size of each entry.

       -dv
       --display-volume
              Display  the volume (disk) number each entry is being read from,
              if reading an existing archive, and being written to.

       -D
       --no-dir-entries
              Do not create  entries  in  the  zip  archive  for  directories.
              Directory   entries   are  created  by  default  so  that  their
              attributes can be saved in the  zip  archive.   The  environment
              variable  ZIPOPT  can be used to change the default options. For
              example under Unix with sh:
                     ZIPOPT="-D"; export ZIPOPT
              (The variable ZIPOPT can be used for any  option,  including  -i
              and -x using a new option format detailed below, and can include
              several options.) The option -D is a shorthand for -x  "*/"  but
              the  latter previously could not be set as default in the ZIPOPT
              environment variable as the contents  of  ZIPOPT  gets  inserted
              near  the beginning of the command line and the file list had to
              end at the end of the line.
              This version of zip does allow -x and -i options  in  ZIPOPT  if
              the form
               -x file file ... @
              is used, where the @ (an argument that is just @) terminates the
              list.

       -DF
       --difference-archive
              Create an archive that contains all new and changed files  since
              the  original  archive was created.  For this to work, the input
              file list and current directory must be the same as  during  the
              original zip operation.
              For example, if the existing archive was created using
                     zip -r foofull .
              from the bar directory, then the command
                     zip -r foofull . -DF --out foonew
              also from the bar directory creates the archive foonew with just
              the files not in foofull and the files where the  size  or  file
              time of the files do not match those in foofull.
              Note  that  the  timezone  environment variable TZ should be set
              according to the local timezone in order for this option to work
              correctly.   A change in timezone since the original archive was
              created could result in no times matching and  all  files  being
              included.
              A possible approach to backing up a directory might be to create
              a normal archive of the contents of  the  directory  as  a  full
              backup, then use this option to create incremental backups.

       -e
       --encrypt
              Encrypt  the  contents of the zip archive using a password which
              is entered on the terminal in response to a  prompt  (this  will
              not  be  echoed;  if  standard error is not a tty, zip will exit
              with an error).  The password prompt is  repeated  to  save  the
              user from typing errors.

       -E
       --longnames
              [OS/2]  Use the .LONGNAME Extended Attribute (if found) as file-
              name.

       -f
       --freshen
              Replace (freshen) an existing entry in the zip archive  only  if
              it  has  been modified more recently than the version already in
              the zip archive; unlike the update option (-u) this will not add
              files that are not already in the zip archive.  For example:
                     zip -f foo
              This  command  should  be run from the same directory from which
              the original zip command was run, since paths stored in zip  ar-
              chives are always relative.
              Note  that  the  timezone  environment variable TZ should be set
              according to the local timezone in order for the -f, -u  and  -o
              options to work correctly.
              The  reasons behind this are somewhat subtle but have to do with
              the differences between the Unix-format file  times  (always  in
              GMT) and most of the other operating systems (always local time)
              and the necessity to compare the two.  A  typical  TZ  value  is
              ``MET-1MEST''  (Middle  European  time with automatic adjustment
              for ``summertime'' or Daylight Savings Time).
              The format is TTThhDDD, where TTT is the time zone such as  MET,
              hh  is  the  difference  between  GMT  and local time such as -1
              above, and DDD is the time zone when daylight savings time is in
              effect.  Leave off the DDD if there is no daylight savings time.
              For the US Eastern time zone EST5EDT.

       -F
       --fix
       -FF
       --fixfix
              Fix the zip archive. The -F option can be used if some  portions
              of  the  archive  are  missing, but requires a reasonably intact
              central directory.  The input archive is scanned as  usual,  but
              zip  will ignore some problems.  The resulting archive should be
              valid, but any inconsistent entries will be left out.
              When doubled as in -FF, the archive is scanned from  the  begin-
              ning and zip scans for special signatures to identify the limits
              between the archive members. The single -F is more  reliable  if
              the archive is not too much damaged, so try this option first.
              If the archive is too damaged or the end has been truncated, you
              must use -FF.  This is a change  from  zip 2.32,  where  the  -F
              option  is  able to read a truncated archive.  The -F option now
              more reliably fixes archives  with  minor  damage  and  the  -FF
              option is needed to fix archives where -F might have been suffi-
              cient before.
              Neither option will recover archives that have been  incorrectly
              transferred  in  ascii mode instead of binary. After the repair,
              the -t option of unzip may show that some files have a bad  CRC.
              Such files cannot be recovered; you can remove them from the ar-
              chive using the -d option of zip.
              Note that -FF may have trouble fixing archives that  include  an
              embedded  zip  archive  that was stored (without compression) in
              the archive and, depending  on  the  damage,  it  may  find  the
              entries  in the embedded archive rather than the archive itself.
              Try -F first as it does not have this problem.
              The format of the fix commands have changed.   For  example,  to
              fix the damaged archive foo.zip,
                     zip -F foo --out foofix
              tries  to read the entries normally, copying good entries to the
              new archive foofix.zip.  If this doesn't work, as when  the  ar-
              chive  is  truncated, or if some entries you know are in the ar-
              chive are missed, then try
                     zip -FF foo --out foofixfix
              and compare the resulting archive to the archive created by  -F.
              The -FF option may create an inconsistent archive.  Depending on
              what is damaged, you can then use the -F option to fix that  ar-
              chive.
              A  split  archive with missing split files can be fixed using -F
              if you have the last split of the archive (the .zip  file).   If
              this file is missing, you must use -FF to fix the archive, which
              will prompt you for the splits you have.
              Currently the fix options can't recover entries that have a  bad
              checksum or are otherwise damaged.

       -FI
       --fifo [Unix]   Normally  zip  skips  reading  any  FIFOs (named pipes)
              encountered, as zip can hang if the FIFO is not being fed.  This
              option tells zip to read the contents of any FIFO it finds.

       -FS
       --filesync
              Synchronize the contents of an archive with the files on the OS.
              Normally when an archive is updated, new  files  are  added  and
              changed  files are updated but files that no longer exist on the
              OS are not deleted from the archive.  This option enables a  new
              mode that checks entries in the archive against the file system.
              If the file time and file size of the entry matches that of  the
              OS  file,  the  entry  is copied from the old archive instead of
              being read from the file system and compressed.  If the OS  file
              has  changed, the entry is read and compressed as usual.  If the
              entry in the archive does not match a file on the OS, the  entry
              is  deleted.   Enabling  this option should create archives that
              are the same as new archives, but  since  existing  entries  are
              copied  instead of compressed, updating an existing archive with
              -FS can be much faster than creating a new archive.   Also  con-
              sider using -u for updating an archive.
              For  this option to work, the archive should be updated from the
              same directory it was created in so the  relative  paths  match.
              If  few  files  are being copied from the old archive, it may be
              faster to create a new archive instead.
              Note that the timezone environment variable  TZ  should  be  set
              according to the local timezone in order for this option to work
              correctly.  A change in timezone since the original archive  was
              created  could  result in no times matching and recompression of
              all files.
              This option deletes files from the archive.  If you need to pre-
              serve  the original archive, make a copy of the archive first or
              use the --out option to output the  updated  archive  to  a  new
              file.  Even though it may be slower, creating a new archive with
              a new archive name is safer, avoids mismatches  between  archive
              and OS paths, and is preferred.

       -g
       --grow
              Grow  (append to) the specified zip archive, instead of creating
              a new one. If this operation fails, zip attempts to restore  the
              archive to its original state. If the restoration fails, the ar-
              chive might  become  corrupted.  This  option  is  ignored  when
              there's  no existing archive or when at least one archive member
              must be updated or deleted.

       -h
       -?
       --help
              Display the zip help information (this also appears  if  zip  is
              run with no arguments).

       -h2
       --more-help
              Display  extended  help  including  more on command line format,
              pattern matching, and more obscure options.

       -i files
       --include files
              Include only the specified files, as in:
                     zip -r foo . -i \*.c
              which will include only the files that end in .c in the  current
              directory  and  its  subdirectories.  (Note for PKZIP users: the
              equivalent command is
                     pkzip -rP foo *.c
              PKZIP does not allow recursion in  directories  other  than  the
              current one.)  The backslash avoids the shell filename substitu-
              tion, so that the name matching  is  performed  by  zip  at  all
              directory  levels.   [This is for Unix and other systems where \
              escapes the next character.  For other systems where  the  shell
              does not process * do not use \ and the above is
                     zip -r foo . -i *.c
              Examples  are  for  Unix  unless  otherwise  specified.]   So to
              include dir, a directory directly under the  current  directory,
              use
                     zip -r foo . -i dir/\*
              or
                     zip -r foo . -i "dir/*"
              to  match paths such as dir/a and dir/b/file.c [on ports without
              wildcard expansion in the shell such as MSDOS and Windows
                     zip -r foo . -i dir/*
              is used.]  Note that currently the  trailing  /  is  needed  for
              directories (as in
                     zip -r foo . -i dir/
              to include directory dir).
              The long option form of the first example is
                     zip -r foo . --include \*.c
              and does the same thing as the short option form.
              Though  the  command syntax used to require -i at the end of the
              command line, this version actually  allows  -i  (or  --include)
              anywhere.   The  list  of  files terminates at the next argument
              starting with -, the end of the command line, or the list termi-
              nator @ (an argument that is just @).  So the above can be given
              as
                     zip -i \*.c @ -r foo .
              for example.  There must be a space between the option  and  the
              first  file of a list.  For just one file you can use the single
              value form
                     zip -i\*.c -r foo .
              (no space between option and value) or
                     zip --include=\*.c -r foo .
              as additional examples.  The single value forms are  not  recom-
              mended  because  they  can  be confusing and, in particular, the
              -ifile format can cause problems if the  first  letter  of  file
              combines  with  i  to  form a two-letter option starting with i.
              Use -sc to see how your command line will be parsed.
              Also possible:
                     zip -r foo  . -i AT include.lst
              which will only include the files in the current  directory  and
              its   subdirectories   that  match  the  patterns  in  the  file
              include.lst.
              Files to -i and -x are patterns matching internal archive paths.
              See -R for more on patterns.

       -I
       --no-image
              [Acorn  RISC OS] Don't scan through Image files.  When used, zip
              will not consider Image files (eg. DOS partitions or  Spark  ar-
              chives  when  SparkFS  is  loaded) as directories but will store
              them as single files.
              For example, if you have SparkFS loaded, zipping a Spark archive
              will  result  in  a zipfile containing a directory (and its con-
              tent) while using the 'I' option will result in a  zipfile  con-
              taining a Spark archive. Obviously this second case will also be
              obtained (without the 'I' option) if SparkFS isn't loaded.

       -ic
       --ignore-case
              [VMS, WIN32] Ignore case when matching  archive  entries.   This
              option  is  only available on systems where the case of files is
              ignored.  On systems with case-insensitive file systems, case is
              normally  ignored  when matching files on the file system but is
              not ignored for -f (freshen), -d (delete), -U (copy), and  simi-
              lar  modes  when  matching against archive entries (currently -f
              ignores case on VMS) because archive entries can be from systems
              where  case  does  matter and names that are the same except for
              case can exist in an archive.  The -ic option makes all matching
              case  insensitive.   This can result in multiple archive entries
              matching a command line pattern.

       -j
       --junk-paths
              Store just the name of a saved file (junk the path), and do  not
              store  directory names. By default, zip will store the full path
              (relative to the current directory).

       -jj
       --absolute-path
              [MacOS] record Fullpath (+ Volname). The complete path including
              volume  will  be  stored.  By  default the relative path will be
              stored.

       -J
       --junk-sfx
              Strip any prepended data (e.g. a SFX stub) from the archive.
       -k
       --DOS-names
              Attempt to convert the names and  paths  to  conform  to  MSDOS,
              store  only  the  MSDOS attribute (just the user write attribute
              from Unix), and mark the entry as made under MSDOS (even  though
              it  was  not);  for compatibility with PKUNZIP under MSDOS which
              cannot handle certain names such as those with two dots.
       -l
       --to-crlf
              Translate the Unix end-of-line character LF into the MSDOS  con-
              vention  CR  LF. This option should not be used on binary files.
              This option can be used on Unix if the zip file is intended  for
              PKUNZIP  under  MSDOS. If the input files already contain CR LF,
              this option adds an extra CR. This is to ensure that unzip -a on
              Unix  will  get back an exact copy of the original file, to undo
              the effect of zip -l.  See -ll for how binary files are handled.
       -la
       --log-append
              Append to existing logfile.  Default is to overwrite.
       -lf logfilepath
       --logfile-path logfilepath
              Open a logfile at the given path.  By default any existing  file
              at  that location is overwritten, but the -la option will result
              in an existing file being opened and  the  new  log  information
              appended  to any existing information.  Only warnings and errors
              are written to the log unless the -li option is also given, then
              all information messages are also written to the log.
       -li
       --log-info
              Include  information  messages, such as file names being zipped,
              in the log.  The default is to only include  the  command  line,
              any warnings and errors, and the final status.
       -ll
       --from-crlf
              Translate the MSDOS end-of-line CR LF into Unix LF.  This option
              should not be used on binary files.  This option can be used  on
              MSDOS  if the zip file is intended for unzip under Unix.  If the
              file is converted and the file is later determined to be  binary
              a warning is issued and the file is probably corrupted.  In this
              release if -ll detects binary in the first buffer  read  from  a
              file,  zip now issues a warning and skips line end conversion on
              the file.  This check seems to catch all  binary  files  tested,
              but  the original check remains and if a converted file is later
              determined to be binary that warning is  still  issued.   A  new
              algorithm  is  now  being  used for binary detection that should
              allow line end conversion of text files  in  UTF-8  and  similar
              encodings.
       -L
       --license
              Display the zip license.
       -m
       --move
              Move  the  specified  files into the zip archive; actually, this
              deletes the target directories/files after making the  specified
              zip  archive.  If a directory becomes empty after removal of the
              files, the directory is also  removed.  No  deletions  are  done
              until zip has created the archive without error.  This is useful
              for conserving disk space, but is potentially dangerous so it is
              recommended to use it in combination with -T to test the archive
              before removing all input files.
       -MM
       --must-match
              All input patterns must match at least one file  and  all  input
              files  found  must  be readable.  Normally when an input pattern
              does not match a file the "name not matched" warning  is  issued
              and  when  an  input file has been found but later is missing or
              not readable a missing or not readable warning  is  issued.   In
              either  case zip continues creating the archive, with missing or
              unreadable new files being skipped and files already in the  ar-
              chive remaining unchanged.  After the archive is created, if any
              files were not readable zip returns the OPEN error code  (18  on
              most  systems)  instead  of the normal success return (0 on most
              systems).  With -MM set, zip exits as soon as an  input  pattern
              is not matched (whenever the "name not matched" warning would be
              issued) or when an input file is not readable.  In  either  case
              zip exits with an OPEN error and no archive is created.
              This option is useful when a known list of files is to be zipped
              so any missing or unreadable files will result in an error.   It
              is less useful when used with wildcards, but zip will still exit
              with an error if any input pattern doesn't match  at  least  one
              file  and  if  any matched files are unreadable.  If you want to
              create the archive anyway and only need to know  if  files  were
              skipped, don't use -MM and just check the return code.  Also -lf
              could be useful.
       -n suffixes
       --suffixes suffixes
              Do not attempt to compress files named with the given  suffixes.
              Such  files are simply stored (0% compression) in the output zip
              file, so that zip doesn't waste  its  time  trying  to  compress
              them.   The  suffixes  are  separated  by either colons or semi-
              colons.  For example:
                     zip -rn .Z:.zip:.tiff:.gif:.snd  foo foo
              will copy everything from foo into foo.zip, but will  store  any
              files  that end in .Z, .zip, .tiff, .gif, or .snd without trying
              to compress them (image and sound files  often  have  their  own
              specialized compression methods).  By default, zip does not com-
              press     files     with     extensions     in     the      list
              .Z:.zip:.zoo:.arc:.lzh:.arj.   Such files are stored directly in
              the output archive.  The environment variable ZIPOPT can be used
              to change the default options. For example under Unix with csh:
                     setenv ZIPOPT "-n .gif:.zip"
              To attempt compression on all files, use:
                     zip -n : foo
              The  maximum  compression option -9 also attempts compression on
              all files regardless of extension.
              On Acorn RISC OS systems the suffixes are actually filetypes  (3
              hex  digit format). By default, zip does not compress files with
              filetypes in the list DDC:D96:68E (i.e. Archives, CFS files  and
              PackDir files).
       -nw
       --no-wild
              Do not perform internal wildcard processing (shell processing of
              wildcards is still done by the shell unless  the  arguments  are
              escaped).   Useful if a list of paths is being read and no wild-
              card substitution is desired.
       -N
       --notes
              [Amiga, MacOS] Save Amiga or MacOS  filenotes  as  zipfile  com-
              ments.  They can be restored by using the -N option of unzip. If
              -c is used also, you are prompted for comments  only  for  those
              files that do not have filenotes.
       -o
       --latest-time
              Set  the  "last  modified" time of the zip archive to the latest
              (oldest) "last modified" time found among the entries in the zip
              archive.   This  can  be  used  without any other operations, if
              desired.  For example:
              zip -o foo
              will change the last modified time of foo.zip to the latest time
              of the entries in foo.zip.
       -O output-file
       --output-file output-file
              Process  the  archive  changes as usual, but instead of updating
              the existing archive, output the  new  archive  to  output-file.
              Useful for updating an archive without changing the existing ar-
              chive and the input archive must be a different  file  than  the
              output archive.
              This  option  can  be used to create updated split archives.  It
              can also be used with -U to copy entries from  an  existing  ar-
              chive to a new archive.  See the EXAMPLES section below.
              Another  use  is  converting  zip  files  from one split size to
              another.  For instance, to convert an archive  with  700  MB  CD
              splits to one with 2 GB DVD splits, can use:
                     zip -s 2g cd-split.zip --out dvd-split.zip
              which uses copy mode.  See -U below.  Also:
                     zip -s 0 split.zip --out unsplit.zip
              will convert a split archive to a single-file archive.
              Copy  mode  will  convert stream entries (using data descriptors
              and which should be  compatible  with  most  unzips)  to  normal
              entries  (which should be compatible with all unzips), except if
              standard encryption  was  used.   For  archives  with  encrypted
              entries,  zipcloak  will decrypt the entries and convert them to
              normal entries.
       -p
       --paths
              Include relative file paths as part of the names of files stored
              in  the  archive.  This is the default.  The -j option junks the
              paths and just stores the names of the files.
       -P password
       --password password
              Use password to encrypt zipfile entries (if any).  THIS IS INSE-
              CURE!   Many  multi-user  operating systems provide ways for any
              user to see the current command line of any other user; even  on
              stand-alone  systems  there  is  always  the threat of over-the-
              shoulder peeking.  Storing the plaintext password as part  of  a
              command  line  in  an  automated script is even worse.  Whenever
              possible, use the non-echoing, interactive prompt to enter pass-
              words.   (And  where  security  is  truly  important, use strong
              encryption such as Pretty Good Privacy instead of the relatively
              weak standard encryption provided by zipfile utilities.)
       -q
       --quiet
              Quiet   mode;   eliminate  informational  messages  and  comment
              prompts.  (Useful, for example, in shell scripts and  background
              tasks).
       -Qn
       --Q-flag n
              [QDOS]  store information about the file in the file header with
              n defined as
              bit  0: Don't add headers for any file
              bit  1: Add headers for all files
              bit  2: Don't wait for interactive key press on exit
       -r
       --recurse-paths
              Travel the directory structure recursively; for example:
                     zip -r foo.zip foo
              or more concisely
                     zip -r foo foo
              In this case, all the files and directories in foo are saved  in
              a zip archive named foo.zip, including files with names starting
              with ".", since the recursion does not use the shell's file-name
              substitution  mechanism.  If you wish to include only a specific
              subset of the files in directory foo and its subdirectories, use
              the  -i  option  to specify the pattern of files to be included.
              You should not use -r with the name  ".*",  since  that  matches
              ".."   which will attempt to zip up the parent directory (proba-
              bly not what was intended).
              Multiple source directories are allowed as in
                     zip -r foo foo1 foo2
              which first zips up foo1 and then foo2, going down  each  direc-
              tory.
              Note  that  while  wildcards  to -r are typically resolved while
              recursing down directories in the file system, any -R,  -x,  and
              -i  wildcards are applied to internal archive pathnames once the
              directories are scanned.  To have wildcards apply  to  files  in
              subdirectories  when recursing on Unix and similar systems where
              the shell does wildcard substitution, either  escape  all  wild-
              cards  or put all arguments with wildcards in quotes.  This lets
              zip see the wildcards and match files  in  subdirectories  using
              them as it recurses.
       -R
       --recurse-patterns
              Travel  the directory structure recursively starting at the cur-
              rent directory; for example:
                     zip -R foo "*.c"
              In this case, all the files matching *.c in the tree starting at
              the  current  directory  are  stored  into  a  zip archive named
              foo.zip.  Note that *.c will match file.c, a/file.c and  a/b/.c.
              More than one pattern can be listed as separate arguments.  Note
              for PKZIP users: the equivalent command is
                     pkzip -rP foo *.c
              Patterns are relative file paths as they appear in the  archive,
              or  will after zipping, and can have optional wildcards in them.
              For example, given the current directory is foo and under it are
              directories foo1 and foo2 and in foo1 is the file bar.c,
                     zip -R foo/*
              will zip up foo, foo/foo1, foo/foo1/bar.c, and foo/foo2.
                     zip -R */bar.c
              will  zip  up  foo/foo1/bar.c.   See the note for -r on escaping
              wildcards.

       -RE
       --regex
              [WIN32]  Before zip 3.0, regular expression  list  matching  was
              enabled  by  default on Windows platforms.  Because of confusion
              resulting from the need to escape "[" and "]" in  names,  it  is
              now  off  by  default for Windows so "[" and "]" are just normal
              characters in names.  This option enables [] matching again.

       -s splitsize
       --split-size splitsize
              Enable creating a split archive and set the split size.  A split
              archive  is  an archive that could be split over many files.  As
              the archive is created, if the size of the archive  reaches  the
              specified  split  size,  that split is closed and the next split
              opened.  In general all splits but the last will  be  the  split
              size  and  the last will be whatever is left.  If the entire ar-
              chive is smaller than the split size a  single-file  archive  is
              created.
              Split  archives  are  stored in numbered files.  For example, if
              the output  archive  is  named  archive  and  three  splits  are
              required,  the  resulting archive will be in the three files ar-
              chive.z01, archive.z02, and archive.zip.  Do not change the num-
              bering  of  these  files  or the archive will not be readable as
              these are used to determine the order the splits are read.
              Split size is a number  optionally  followed  by  a  multiplier.
              Currently  the  number  must  be an integer.  The multiplier can
              currently be one of k (kilobytes), m (megabytes), g (gigabytes),
              or  t  (terabytes).   As  64k is the minimum split size, numbers
              without multipliers default to megabytes.  For example, to  cre-
              ate  a  split  archive  called  foo with the contents of the bar
              directory with splits of 670 MB that might be useful for burning
              on CDs, the command:
                     zip -s 670m -r foo bar
              could be used.
              Currently  the  old  splits  of a split archive are not excluded
              from a new archive, but they can be specifically  excluded.   If
              possible,  keep  the  input  and output archives out of the path
              being zipped when creating split archives.
              Using -s without -sp as above creates all the splits  where  foo
              is  being  written,  in  this  case the current directory.  This
              split mode updates the splits as the archive is  being  created,
              requiring  all  splits to remain writable, but creates split ar-
              chives that are readable by any unzip that  supports  split  ar-
              chives.   See  -sp  below  for  enabling  split pause mode which
              allows splits to be written directly to removable media.
              The option -sv can be used to enable verbose splitting and  pro-
              vide details of how the splitting is being done.  The -sb option
              can be used to ring the bell when zip pauses for the next  split
              destination.
              Split  archives cannot be updated, but see the -O (--out) option
              for how a split archive can be updated as it is copied to a  new
              archive.   A  split archive can also be converted into a single-
              file archive using a split size of 0 or negating the -s option:
                     zip -s 0 split.zip --out single.zip
              Also see -U (--copy) for more on using copy mode.
       -sb
       --split-bell
              If splitting and using split pause mode, ring the bell when  zip
              pauses for each split destination.
       -sc
       --show-command
              Show  the  command line starting zip as processed and exit.  The
              new command parser permutes the arguments, putting  all  options
              and  any values associated with them before any non-option argu-
              ments.  This allows an option to appear anywhere in the  command
              line  as  long as any values that go with the option go with it.
              This option displays the command line as zip sees it,  including
              any arguments from the environment such as from the ZIPOPT vari-
              able.  Where allowed, options later  in  the  command  line  can
              override options earlier in the command line.
       -sf
       --show-files
              Show  the  files  that  would  be  operated  on, then exit.  For
              instance, if creating a new archive, this will  list  the  files
              that  would  be  added.   If the option is negated, -sf-, output
              only to an open log file.  Screen display is not recommended for
              large lists.
       -so
       --show-options
              Show  all  available options supported by zip as compiled on the
              current system.  As this command  reads  the  option  table,  it
              should include all options.  Each line includes the short option
              (if defined), the long option (if defined), the  format  of  any
              value  that  goes with the option, if the option can be negated,
              and a small description.  The value  format  can  be  no  value,
              required  value,  optional value, single character value, number
              value, or a list of values.  The output of this  option  is  not
              intended  to  show  how  to  use  any  option but only show what
              options are available.
       -sp
       --split-pause
              If splitting is enabled with -s, enable split pause mode.   This
              creates split archives as -s does, but stream writing is used so
              each split can be closed as soon as it is written and  zip  will
              pause  between each split to allow changing split destination or
              media.
              Though this split mode allows writing splits directly to  remov-
              able  media, it uses stream archive format that may not be read-
              able by some unzips.  Before relying on splits created with -sp,
              test a split archive with the unzip you will be using.
              To  convert a stream split archive (created with -sp) to a stan-
              dard archive see the --out option.
       -su
       --show-unicode
              As -sf, but also show Unicode version of the path if exists.
       -sU
       --show-just-unicode
              As -sf, but only show Unicode version of  the  path  if  exists,
              otherwise show the standard version of the path.
       -sv
       --split-verbose
              Enable various verbose messages while splitting, showing how the
              splitting is being done.
       -S
       --system-hidden
              [MSDOS, OS/2, WIN32 and ATARI] Include system and hidden files.
              [MacOS] Includes finder invisible files, which are ignored  oth-
              erwise.
       -t mmddyyyy
       --from-date mmddyyyy
              Do  not  operate  on files modified prior to the specified date,
              where mm is the month (00-12),  dd  is  the  day  of  the  month
              (01-31),  and  yyyy  is  the  year.   The  ISO 8601  date format
              yyyy-mm-dd is also accepted.  For example:
                     zip -rt 12071991 infamy foo
                     zip -rt 1991-12-07 infamy foo
              will add all the files in foo and its subdirectories  that  were
              last  modified  on  or after 7 December 1991, to the zip archive
              infamy.zip.
       -tt mmddyyyy
       --before-date mmddyyyy
              Do not operate on files modified after or at the specified date,
              where  mm  is  the  month  (00-12),  dd  is the day of the month
              (01-31), and  yyyy  is  the  year.   The  ISO 8601  date  format
              yyyy-mm-dd is also accepted.  For example:
                     zip -rtt 11301995 infamy foo
                     zip -rtt 1995-11-30 infamy foo
              will  add  all the files in foo and its subdirectories that were
              last modified before  30  November  1995,  to  the  zip  archive
              infamy.zip.
       -T
       --test
              Test  the integrity of the new zip file. If the check fails, the
              old zip file is unchanged and (with  the  -m  option)  no  input
              files are removed.
       -TT cmd
       --unzip-command cmd
              Use  command cmd instead of 'unzip -tqq' to test an archive when
              the -T option is used.  On Unix, to use a copy of unzip  in  the
              current  directory  instead  of the standard system unzip, could
              use:
               zip archive file1 file2 -T -TT "./unzip -tqq"
              In cmd, {} is replaced by the name  of  the  temporary  archive,
              otherwise  the name of the archive is appended to the end of the
              command.  The return code is checked for success (0 on Unix).
       -u
       --update
              Replace (update) an existing entry in the zip archive only if it
              has  been modified more recently than the version already in the
              zip archive.  For example:
                     zip -u stuff *
              will add any new files in the current directory, and update  any
              files  which  have been modified since the zip archive stuff.zip
              was last created/modified (note that zip will not  try  to  pack
              stuff.zip into itself when you do this).
              Note  that  the -u option with no input file arguments acts like
              the -f (freshen) option.
       -U
       --copy-entries
              Copy entries from one archive to another.   Requires  the  --out
              option  to  specify  a  different output file than the input ar-
              chive.  Copy mode is the reverse of -d delete.  When  delete  is
              being used with --out, the selected entries are deleted from the
              archive and all other entries are copied  to  the  new  archive,
              while copy mode selects the files to include in the new archive.
              Unlike -u update, input patterns on the command line are matched
              against archive entries only and not the file system files.  For
              instance,
                     zip inarchive "*.c" --copy --out outarchive
              copies entries with names ending in .c from  inarchive  to  out-
              archive.   The  wildcard must be escaped on some systems to pre-
              vent the shell from substituting names of files  from  the  file
              system  which  may  have  no relevance to the entries in the ar-
              chive.
              If no input files appear on the command line and --out is  used,
              copy mode is assumed:
                     zip inarchive --out outarchive
              This is useful for changing split size for instance.  Encrypting
              and decrypting entries is not yet  supported  using  copy  mode.
              Use zipcloak for that.
       -UN v
       --unicode v
              Determine  what zip should do with Unicode file names.  zip 3.0,
              in addition to the standard file path, now  includes  the  UTF-8
              translation  of the path if the entry path is not entirely 7-bit
              ASCII.  When an entry is missing the Unicode path,  zip  reverts
              back  to  the  standard  file  path.  The problem with using the
              standard path is this path is in the local character set of  the
              zip  that  created  the entry, which may contain characters that
              are not valid in the character set  being  used  by  the  unzip.
              When  zip  is reading an archive, if an entry also has a Unicode
              path, zip now defaults to using the Unicode path to recreate the
              standard path using the current local character set.
              This  option  can  be  used to determine what zip should do with
              this path if there is a mismatch  between  the  stored  standard
              path and the stored UTF-8 path (which can happen if the standard
              path was updated).  In all cases, if there is a mismatch  it  is
              assumed  that  the  standard  path  is more current and zip uses
              that.  Values for v are
                     q - quit if paths do not match
                     w - warn, continue with standard path
                     i - ignore, continue with standard path
                     n - no Unicode, do not use Unicode paths
              The default is to warn and continue.
              Characters that are not valid in the current character  set  are
              escaped  as  #Uxxxx  and #Lxxxxxx, where x is an ASCII character
              for a hex digit.  The first is used if a 16-bit character number
              is  sufficient to represent the Unicode character and the second
              if the character needs more than 16 bits to represent it's  Uni-
              code character code.  Setting -UN to
                     e - escape
              as in
                     zip archive -sU -UN=e
              forces zip to escape all characters that are not printable 7-bit
              ASCII.
              Normally zip stores UTF-8 directly in the standard path field on
              systems  where UTF-8 is the current character set and stores the
              UTF-8 in the new extra fields otherwise.  The option
                     u - UTF-8
              as in
                     zip archive dir -r -UN=UTF8
              forces zip to store UTF-8 as native in the archive.   Note  that
              storing  UTF-8 directly is the default on Unix systems that sup-
              port it.  This option could be useful on Windows  systems  where
              the  escaped  path is too large to be a valid path and the UTF-8
              version of the path is smaller, but native UTF-8 is not backward
              compatible on Windows systems.

       -v
       --verbose
              Verbose mode or print diagnostic version info.
              Normally,  when  applied to real operations, this option enables
              the display of a progress indicator during compression (see  -dd
              for  more  on  dots)  and requests verbose diagnostic info about
              zipfile structure oddities.
              However, when -v is the only command line argument a  diagnostic
              screen  is printed instead.  This should now work even if stdout
              is redirected to a file, allowing easy saving of the information
              for  sending  with  bug reports to Info-ZIP.  The version screen
              provides the help screen header with program name, version,  and
              release  date,  some pointers to the Info-ZIP home and distribu-
              tion sites, and shows information about the  target  environment
              (compiler type and version, OS version, compilation date and the
              enabled optional features used to create the zip executable).
       -V
       --VMS-portable
              [VMS] Save VMS file attributes.  (Files are  truncated at  EOF.)
              When  a  -V  archive is unpacked on a non-VMS system,  some file
              types (notably Stream_LF text  files   and   pure  binary  files
              like  fixed-512)  should be extracted intact.  Indexed files and
              file types with embedded record sizes  (notably  variable-length
              record types) will probably be seen as corrupt elsewhere.
       -VV
       --VMS-specific
              [VMS]  Save  VMS file attributes, and  all allocated blocks in a
              file,  including  any  data beyond EOF.  Useful for moving  ill-
              formed  files   among   VMS  systems.    When  a  -VV archive is
              unpacked on a non-VMS system, almost all files will appear  cor-
              rupt.
       -w
       --VMS-versions
              [VMS]  Append  the  version  number  of  the  files to the name,
              including multiple versions of files.  Default is  to  use  only
              the most recent version of a specified file.
       -ww
       --VMS-dot-versions
              [VMS]  Append  the  version  number  of  the  files to the name,
              including multiple versions of files,  using  the  .nnn  format.
              Default  is  to  use only the most recent version of a specified
              file.
       -ws
       --wild-stop-dirs
              Wildcards match only at a directory level.  Normally zip handles
              paths as strings and given the paths
                     /foo/bar/dir/file1.c
                     /foo/bar/file2.c
              an input pattern such as
                     /foo/bar/*
              normally  would match both paths, the * matching dir/file1.c and
              file2.c.  Note that in the first case a directory  boundary  (/)
              was  crossed in the match.  With -ws no directory bounds will be
              included in the match, making  wildcards  local  to  a  specific
              directory  level.   So,  with  -ws enabled, only the second path
              would be matched.
              When using -ws, use ** to match across directory boundaries as *
              does normally.
       -x files
       --exclude files
              Explicitly exclude the specified files, as in:
                     zip -r foo foo -x \*.o
              which  will include the contents of foo in foo.zip while exclud-
              ing all the files that end in  .o.   The  backslash  avoids  the
              shell  filename  substitution, so that the name matching is per-
              formed by zip at all directory levels.
              Also possible:
                     zip -r foo foo -x AT exclude.lst
              which will include the contents of foo in foo.zip while  exclud-
              ing   all  the  files  that  match  the  patterns  in  the  file
              exclude.lst.
              The long option forms of the above are
                     zip -r foo foo --exclude \*.o
              and
                     zip -r foo foo --exclude @exclude.lst
              Multiple patterns can be specified, as in:
                     zip -r foo foo -x \*.o \*.c
              If there is no space between -x and the pattern, just one  value
              is assumed (no list):
                     zip -r foo foo -x\*.o
              See -i for more on include and exclude.
       -X
       --no-extra
              Do  not save extra file attributes (Extended Attributes on OS/2,
              uid/gid and file times on Unix).   The  zip  format  uses  extra
              fields  to  include additional information for each entry.  Some
              extra fields are specific to particular systems while others are
              applicable to all systems.  Normally when zip reads entries from
              an existing archive, it reads the extra fields it knows,  strips
              the  rest,  and adds the extra fields applicable to that system.
              With -X, zip strips all old fields and only includes the Unicode
              and  Zip64 extra fields (currently these two extra fields cannot
              be disabled).
              Negating this  option,  -X-,  includes  all  the  default  extra
              fields, but also copies over any unrecognized extra fields.
       -y
       --symlinks
              For  UNIX and VMS (V8.3 and later), store symbolic links as such
              in the zip archive, instead of compressing and storing the  file
              referred  to  by  the  link.   This can avoid multiple copies of
              files being included in the archive as zip recurses  the  direc-
              tory trees and accesses files directly and by links.
       -z
       --archive-comment
              Prompt for a multi-line comment for the entire zip archive.  The
              comment is ended by a line containing just a period, or  an  end
              of file condition (^D on Unix, ^Z on MSDOS, OS/2, and VMS).  The
              comment can be taken from a file:
                     zip -z foo < foowhat
       -Z cm
       --compression-method cm
              Set the default compression method.  Currently the main  methods
              supported  by zip are store and deflate.  Compression method can
              be set to:
              store - Setting the compression method to store  forces  zip  to
              store  entries  with  no  compression.  This is generally faster
              than compressing entries, but results in no space savings.  This
              is the same as using -0 (compression level zero).
              deflate - This is the default method for zip.  If zip determines
              that storing is better than deflation, the entry will be  stored
              instead.
              bzip2 - If bzip2 support is compiled in, this compression method
              also becomes available.  Only some modern unzips currently  sup-
              port the bzip2 compression method, so test the unzip you will be
              using before relying on archives using this method  (compression
              method 12).
              For  example,  to  add bar.c to archive foo using bzip2 compres-
              sion:
                     zip -Z bzip2 foo bar.c
              The compression method can be abbreviated:
                     zip -Zb foo bar.c
       -#
       (-0, -1, -2, -3, -4, -5, -6, -7, -8, -9)
              Regulate the speed of compression using the specified  digit  #,
              where  -0  indicates  no compression (store all files), -1 indi-
              cates the fastest compression speed (less  compression)  and  -9
              indicates  the  slowest  compression speed (optimal compression,
              ignores the suffix list). The default compression level is -6.
              Though still being worked, the intention is  this  setting  will
              control  compression  speed  for  all compression methods.  Cur-
              rently only deflation is controlled.
       -!
       --use-privileges
              [WIN32] Use priviliges (if granted) to  obtain  all  aspects  of
              WinNT security.
       -@
       --names-stdin
              Take the list of input files from standard input. Only one file-
              name per line.
       -$
       --volume-label
              [MSDOS, OS/2, WIN32] Include the  volume  label  for  the  drive
              holding the first file to be compressed.  If you want to include
              only the volume label or to force  a  specific  drive,  use  the
              drive name as first file name, as in:
                     zip -$ foo a: c:bar
EXAMPLES
       The simplest example:
              zip stuff *
       creates the archive stuff.zip (assuming it does not exist) and puts all
       the files in the current directory in it, in compressed form (the  .zip
       suffix  is  added automatically, unless the archive name contains a dot
       already; this allows the explicit specification of other suffixes).
       Because of the way the shell on Unix does filename substitution,  files
       starting with "." are not included; to include these as well:
              zip stuff .* *
       Even  this  will not include any subdirectories from the current direc-
       tory.
       To zip up an entire directory, the command:
              zip -r foo foo
       creates the archive foo.zip, containing all the files  and  directories
       in the directory foo that is contained within the current directory.
       You  may  want  to  make  a zip archive that contains the files in foo,
       without recording the directory name, foo.  You can use the  -j  option
       to leave off the paths, as in:
              zip -j foo foo/*
       If  you are short on disk space, you might not have enough room to hold
       both the original directory and the corresponding  compressed  zip  ar-
       chive.   In this case, you can create the archive in steps using the -m
       option.  If foo contains the subdirectories tom, dick, and  harry,  you
       can:
              zip -rm foo foo/tom
              zip -rm foo foo/dick
              zip -rm foo foo/harry
       where  the  first  command creates foo.zip, and the next two add to it.
       At the completion of each zip command,  the  last  created  archive  is
       deleted, making room for the next zip command to function.


       Use  -s  to set the split size and create a split archive.  The size is
       given as a number followed optionally by one of k (kB), m (MB), g (GB),
       or t (TB).  The command
              zip -s 2g -r split.zip foo
       creates a split archive of the directory foo with splits no bigger than
       2 GB each.  If foo contained 5 GB of contents  and  the  contents  were
       stored  in  the split archive without compression (to make this example
       simple), this would create three splits, split.z01 at  2 GB,  split.z02
       at 2 GB, and split.zip at a little over 1 GB.
       The  -sp option can be used to pause zip between splits to allow chang-
       ing removable media, for example, but read the descriptions  and  warn-
       ings for both -s and -sp below.
       Though  zip does not update split archives, zip provides the new option
       -O (--output-file) to allow split archives to be updated and saved in a
       new archive.  For example,
              zip inarchive.zip foo.c bar.c --out outarchive.zip
       reads  archive  inarchive.zip,  even if split, adds the files foo.c and
       bar.c, and writes the resulting archive to  outarchive.zip.   If  inar-
       chive.zip is split then outarchive.zip defaults to the same split size.
       Be aware that outarchive.zip and any split files that are created  with
       it  are always overwritten without warning.  This may be changed in the
       future.


PATTERN MATCHING
       This section applies only to Unix.  Watch this  space  for  details  on
       MSDOS  and  VMS  operation.  However, the special wildcard characters *
       and [] below apply to at least MSDOS also.
       The Unix shells (sh, csh, bash, and others) normally do  filename  sub-
       stitution (also called "globbing") on command arguments.  Generally the
       special characters are:
       ?      match any single character
       *      match any number of characters (including none)
       []     match any character in the range indicated within  the  brackets
              (example:  [a-f], [0-9]).  This form of wildcard matching allows
              a user to specify a list of characters between  square  brackets
              and  if any of the characters match the expression matches.  For
              example:
                     zip archive "*.[hc]"
              would archive all files in the current directory that end in  .h
              or .c.
              Ranges of characters are supported:
                     zip archive "[a-f]*"
              would  add  to  the  archive all files starting with "a" through
              "f".
              Negation is also supported, where any character in that position
              not in the list matches.  Negation is supported by adding ! or ^
              to the beginning of the list:
                     zip archive "*.[!o]"
              matches files that don't end in ".o".
              On WIN32, [] matching needs to be turned on with the -RE  option
              to avoid the confusion that names with [ or ] have caused.

       When  these  characters  are  encountered (without being escaped with a
       backslash or quotes), the shell will look for  files  relative  to  the
       current  path  that  match the pattern, and replace the argument with a
       list of the names that matched.
       The zip program can do the same matching on names that are in  the  zip
       archive  being  modified  or,  in  the  case  of the -x (exclude) or -i
       (include) options, on the list of files to be  operated  on,  by  using
       backslashes  or  quotes to tell the shell not to do the name expansion.
       In general, when zip encounters a name in the list of files to  do,  it
       first  looks  for the name in the file system.  If it finds it, it then
       adds it to the list of files to do.  If it does not find it,  it  looks
       for  the  name  in the zip archive being modified (if it exists), using
       the pattern matching characters described above, if present.  For  each
       match,  it  will  add  that  name to the list of files to be processed,
       unless this name matches one given with the  -x  option,  or  does  not
       match any name given with the -i option.
       The pattern matching includes the path, and so patterns like \*.o match
       names that end in ".o", no matter what the path prefix is.   Note  that
       the  backslash must precede every special character (i.e. ?*[]), or the
       entire argument must be enclosed in double quotes ("").
       In general, use backslashes or double quotes for paths that have  wild-
       cards  to  make  zip do the pattern matching for file paths, and always
       for paths and strings that have spaces or wildcards for -i, -x, -R, -d,
       and -U and anywhere zip needs to process the wildcards.
ENVIRONMENT
       The  following  environment  variables  are  read  and  used  by zip as
       described.
       ZIPOPT
              contains default options that will be  used  when  running  zip.
              The  contents of this environment variable will get added to the
              command line just after the zip command.
       ZIP
              [Not on RISC OS and VMS] see ZIPOPT
       Zip$Options
              [RISC OS] see ZIPOPT
       Zip$Exts
              [RISC OS] contains extensions separated by a : that  will  cause
              native  filenames  with  one  of  the specified extensions to be
              added to the zip file with basename and extension swapped.
       ZIP_OPTS
              [VMS] see ZIPOPT
SEE ALSO
       compress(1), shar(1L), tar(1), unzip(1L), gzip(1L)
DIAGNOSTICS
       The exit status (or error level) approximates the exit codes defined by
       PKWARE and takes on the following values, except under VMS:
              0      normal; no errors or warnings detected.
              2      unexpected end of zip file.
              3      a generic error in the zipfile format was detected.  Pro-
                     cessing may have completed successfully anyway; some bro-
                     ken zipfiles created by other archivers have simple work-
                     arounds.
              4      zip was unable to allocate memory for one or more buffers
                     during program initialization.
              5      a  severe error in the zipfile format was detected.  Pro-
                     cessing probably failed immediately.
              6      entry too large to be  processed  (such  as  input  files
                     larger  than  2 GB when not using Zip64 or trying to read
                     an existing archive that is too large) or entry too large
                     to be split with zipsplit
              7      invalid comment format
              8      zip -T failed or out of memory
              9      the user aborted zip prematurely with control-C (or simi-
                     lar)
              10     zip encountered an error while using a temp file
              11     read or seek error
              12     zip has nothing to do
              13     missing or empty zip file
              14     error writing to a file
              15     zip was unable to create a file to write to
              16     bad command line parameters
              18     zip could not open a specified file to read
              19     zip was compiled with options not supported on this  sys-
                     tem
       VMS  interprets  standard Unix (or PC) return values as other, scarier-
       looking things, so zip instead maps them into VMS-style  status  codes.
       In  general, zip sets VMS Facility = 1955 (0x07A3), Code = 2* Unix_sta-
       tus, and an appropriate Severity  (as  specified  in  ziperr.h).   More
       details   are   included   in   the  VMS-specific  documentation.   See
       [.vms]NOTES.TXT and [.vms]vms_msg_gen.c.
BUGS
       zip 3.0 is not compatible with PKUNZIP 1.10. Use zip 1.1 to produce zip
       files which can be extracted by PKUNZIP 1.10.
       zip  files  produced by zip 3.0 must not be updated by zip 1.1 or PKZIP
       1.10, if they contain encrypted members or if they have  been  produced
       in a pipe or on a non-seekable device. The old versions of zip or PKZIP
       would create an archive with an incorrect format.  The old versions can
       list the contents of the zip file but cannot extract it anyway (because
       of the new compression algorithm).  If you do not  use  encryption  and
       use regular disk files, you do not have to care about this problem.
       Under  VMS, not all of the odd file formats are treated properly.  Only
       stream-LF format zip files are expected to work with zip.   Others  can
       be  converted  using  Rahul  Dhesi's BILF program.  This version of zip
       handles some of the conversion internally.  When using Kermit to trans-
       fer  zip  files  from  VMS to MSDOS, type "set file type block" on VMS.
       When transfering from MSDOS to VMS, type "set file type fixed" on  VMS.
       In both cases, type "set file type binary" on MSDOS.
       Under  some  older  VMS  versions, zip may hang for file specifications
       that use DECnet syntax foo::*.*.
       On OS/2, zip cannot match some names, such as those including an excla-
       mation  mark  or a hash sign.  This is a bug in OS/2 itself: the 32-bit
       DosFindFirst/Next don't find such names.  Other programs  such  as  GNU
       tar are also affected by this bug.
       Under  OS/2, the amount of Extended Attributes displayed by DIR is (for
       compatibility) the amount returned by the 16-bit version  of  DosQuery-
       PathInfo().  Otherwise OS/2 1.3 and 2.0 would report different EA sizes
       when DIRing a file.  However, the  structure  layout  returned  by  the
       32-bit  DosQueryPathInfo()  is  a  bit different, it uses extra padding
       bytes and link pointers (it's a linked list)  to  have  all  fields  on
       4-byte  boundaries for portability to future RISC OS/2 versions. There-
       fore the value reported by zip (which uses this 32-bit-mode size)  dif-
       fers  from  that  reported  by  DIR.   zip stores the 32-bit format for
       portability, even the 16-bit MS-C-compiled version running on OS/2 1.3,
       so even this one shows the 32-bit-mode size.
AUTHORS
       Copyright (C) 1997-2008 Info-ZIP.
       Currently distributed under the Info-ZIP license.
       Copyright (C) 1990-1997 Mark Adler, Richard B. Wales, Jean-loup Gailly,
       Onno van der Linden, Kai Uwe Rommel, Igor Mandrichenko, John  Bush  and
       Paul Kienitz.
       Original copyright:
       Permission is granted to any individual or institution to use, copy, or
       redistribute this software so long as all of  the  original  files  are
       included,  that  it  is  not  sold  for profit, and that this copyright
       notice is retained.
       LIKE ANYTHING ELSE THAT'S FREE, ZIP AND ITS  ASSOCIATED  UTILITIES  ARE
       PROVIDED  AS IS AND COME WITH NO WARRANTY OF ANY KIND, EITHER EXPRESSED
       OR IMPLIED. IN NO EVENT WILL THE COPYRIGHT HOLDERS BE  LIABLE  FOR  ANY
       DAMAGES RESULTING FROM THE USE OF THIS SOFTWARE.
       Please  send  bug reports and comments using the web page at: www.info-
       zip.org.  For bug reports, please  include  the  version  of  zip  (see
       zip -h),  the make options used to compile it (see zip -v), the machine
       and operating system in use, and as much additional information as pos-
       sible.
ACKNOWLEDGEMENTS
       Thanks  to  R. P. Byrne for his Shrink.Pas program, which inspired this
       project, and from which the shrink algorithm was stolen; to  Phil  Katz
       for  placing in the public domain the zip file format, compression for-
       mat, and .ZIP filename extension, and for accepting  minor  changes  to
       the  file  format; to Steve Burg for clarifications on the deflate for-
       mat; to Haruhiko Okumura and Leonid Broukhis for providing some  useful
       ideas  for  the  compression  algorithm; to Keith Petersen, Rich Wales,
       Hunter Goatley and Mark Adler for providing a mailing list and ftp site
       for  the  Info-ZIP  group to use; and most importantly, to the Info-ZIP
       group itself (listed in the file infozip.who)  without  whose  tireless
       testing  and bug-fixing efforts a portable zip would not have been pos-
       sible.  Finally we should thank (blame) the first  Info-ZIP  moderator,
       David  Kirschbaum,  for  getting  us into this mess in the first place.
       The manual page was rewritten for Unix by R. P. C. Rodgers and  updated
       by E. Gordon for zip 3.0.

Info-ZIP                      16 June 2008 (v3.0)                      ZIP(1L)