yum(template) - phpMan

yum(8)                                                                  yum(8)

NAME
       yum - Yellowdog Updater Modified
SYNOPSIS
       yum [options] command [package ...]
DESCRIPTION
       yum is an interactive, rpm based, package manager. It can automatically
       perform system updates, including dependency analysis and obsolete pro-
       cessing  based  on "repository" metadata. It can also perform installa-
       tion of new packages, removal of old packages and  perform  queries  on
       the  installed and/or available packages among many other commands/ser-
       vices (see below). yum is similar to other high level package  managers
       like apt-get and smart.
       While  there  are  some  graphical interfaces directly to the yum code,
       more recent graphical interface development  is  happening  with  Pack-
       ageKit and the gnome-packagekit application.
       command is one of:
        * install package1 [package2] [...]
        * update [package1] [package2] [...]
        * update-to [package1] [package2] [...]
        * update-minimal [package1] [package2] [...]
        * check-update
        * upgrade [package1] [package2] [...]
        * upgrade-to [package1] [package2] [...]
        * distribution-synchronization [package1] [package2] [...]
        * remove | erase package1 [package2] [...]
        * autoremove [package1] [...]
        * list [...]
        * info [...]
        * provides | whatprovides feature1 [feature2] [...]
        * clean [ packages | metadata | expire-cache | rpmdb | plugins | all ]
        * makecache [fast]
        * groups [...]
        * search string1 [string2] [...]
        * shell [filename]
        * resolvedep dep1 [dep2] [...]
           (maintained  for  legacy  reasons  only - use repoquery or yum pro-
       vides)
        * localinstall rpmfile1 [rpmfile2] [...]
           (maintained for legacy reasons only - use install)
        * localupdate rpmfile1 [rpmfile2] [...]
           (maintained for legacy reasons only - use update)
        * reinstall package1 [package2] [...]
        * downgrade package1 [package2] [...]
        * deplist package1 [package2] [...]
        * repolist [all|enabled|disabled]
        * repoinfo [all|enabled|disabled]
        * repository-packages <enabled-repoid> <install|remove|remove-or-rein-
       stall|remove-or-distribution-synchronization> [package2] [...]
         * version [ all | installed | available | group-* | nogroups* | grou-
       plist | groupinfo ]
          *   history    [info|list|packages-list|packages-info|summary|addon-
       info|redo|undo|rollback|new|sync|stats]
        * load-transaction [txfile]
        * updateinfo [summary | list | info | remove-pkgs-ts | exclude-updates
       | exclude-all | check-running-kernel]
        * fssnapshot [summary | list | have-space | create | delete]
        * fs [filters | refilter | refilter-cleanup | du]
        * check
        * help [command]
       Unless the --help or -h option is given, one of the above commands must
       be present.
       Repository configuration is honored in all operations.
       install
              Is  used  to install the latest version of a package or group of
              packages while ensuring that  all  dependencies  are  satisfied.
              (See  Specifying package names for more information) If no pack-
              age matches the given package name(s), they are assumed to be  a
              shell  glob  and  any  matches  are  then installed. If the name
              starts with @^ then it is treated as an environment group (group
              install  @^foo),  an  @  character  and  it's treated as a group
              (plain group install).
              If the name starts with a "-" character, then a search  is  done
              within  the  transaction  and any matches are removed. Note that
              Yum options use the same syntax and it may be necessary  to  use
              "--" to resolve any possible conflicts.
              If  the name is a file, then install works like localinstall. If
              the name doesn't match a package, then  package  "provides"  are
              searched (e.g. "_sqlitecache.so()(64bit)") as are filelists (Eg.
              "/usr/bin/yum"). Also note that for  filelists,  wildcards  will
              match multiple packages.
              Because  install does a lot of work to make it as easy as possi-
              ble to use, there are  also  a  few  specific  install  commands
              "install-n",  "install-na"  and "install-nevra". These only work
              on package names, and do not process wildcards etc.
       update If run without any packages, update will update every  currently
              installed package.  If one or more packages or package globs are
              specified, Yum will only  update  the  listed  packages.   While
              updating  packages,  yum  will  ensure that all dependencies are
              satisfied. (See Specifying package names for  more  information)
              If  the  packages or globs specified match to packages which are
              not currently installed  then  update  will  not  install  them.
              update  operates  on  groups, files, provides and filelists just
              like the "install" command.
              If the main obsoletes configure option is true (default) or  the
              --obsoletes  flag  is present yum will include package obsoletes
              in its calculations - this makes it  better  for  distro-version
              changes,  for example: upgrading from somelinux 8.0 to somelinux
              9.
              Note that "update" works on installed packages first,  and  only
              if there are no matches does it look for available packages. The
              difference is most noticeable when you do "update foo-1-2" which
              will  act  exactly  as "update foo" if foo-1-2 is installed. You
              can use the "update-to" if you'd prefer that nothing  happen  in
              the above case.
       update-to
              This  command  works like "update" but always specifies the ver-
              sion of the package we want to update to.
       update-minimal
              This works like the update command, but if you have the  package
              foo-1  installed and have foo-2 (bugfix) and foo-3 (enhancement)
              available with updateinfo.xml then update-minimal --bugfix  will
              update you to foo-2.
       check-update
              Implemented  so  you  could know if your machine had any updates
              that needed to be  applied  without  running  it  interactively.
              Returns exit value of 100 if there are packages available for an
              update. Also returns a list of the packages  to  be  updated  in
              list  format. Returns 0 if no packages are available for update.
              Returns 1 if an error occurred.  Running in  verbose  mode  also
              shows obsoletes.
       upgrade
              Is the same as the update command with the --obsoletes flag set.
              See update for more details.
       upgrade-to
              This command works like "upgrade" but always specifies the  ver-
              sion of the package we want to update to.
       distribution-synchronization or distro-sync
              Synchronizes  the installed package set with the latest packages
              available, this is done by either obsoleting, upgrading or down-
              grading  as  appropriate. This will "normally" do the same thing
              as the upgrade command however  if  you  have  the  package  FOO
              installed at version 4, and the latest available is only version
              3, then this command will downgrade FOO to version 3.
              If you give the optional argument "full", then the command  will
              also  reinstall  packages  where  the  install  checksum and the
              available checksum do not match. And remove old packages (can be
              used to sync. rpmdb versions). The optional argument "different"
              can be used to specify the default operation.
              This command does not perform operations on groups, local  pack-
              ages or negative selections.
       remove or erase
              Are  used  to  remove  the specified packages from the system as
              well as removing any packages which depend on the package  being
              removed.   remove   operates  on  groups,  files,  provides  and
              filelists just like the "install" command.(See Specifying  pack-
              age names for more information)
              Note that "yum" is included in the protected_packages configura-
              tion, by default.  So you can't accidentally remove yum itself.
              The remove_leaf_only configuration changes the behaviour of this
              command  to  only remove packages which aren't required by some-
              thing else.
              The clean_requirements_on_remove configuration changes  the  be-
              haviour  of  this  command to also remove packages that are only
              dependencies of this package.
              Because remove does a lot of work to make it as easy as possible
              to  use,  there are also a few specific remove commands "remove-
              n", "remove-na" and "remove-nevra". These only work  on  package
              names, and do not process wildcards etc.
       autoremove
              With  one  or more arguments this command works like running the
              "remove" command with  the  clean_requirements_on_remove  turned
              on. However you can also specify no arguments, at which point it
              tries to remove any packages that weren't  installed  explicitly
              by  the  user  and  which aren't required by anything (so called
              leaf packages).
              Because autoremove does a lot of work to make it as easy as pos-
              sible  to use, there are also a few specific autoremove commands
              "autoremove-n", "autoremove-na"  and  "autoremove-nevra".  These
              only work on package names, and do not process wildcards etc.
       list   Is  used  to  list various information about available packages;
              more complete details are available in the List Options  section
              below.
       provides or whatprovides
              Is used to find out which package provides some feature or file.
              Just use a specific name or a file-glob-syntax wildcards to list
              the packages available or installed that provide that feature or
              file.
       search This is used to find packages when you know something about  the
              package but aren't sure of it's name. By default search will try
              searching just package names and summaries, but if that  "fails"
              it will then try descriptions and url.
              Yum  search  orders  the results so that those packages matching
              more terms will appear first.
              You can force searching everything by specifying  "all"  as  the
              first argument.
       info   Is  used  to  list  a  description and summary information about
              available packages; takes the same  arguments  as  in  the  List
              Options section below.
       clean  Is  used  to clean up various things which accumulate in the yum
              cache directory over time.  More complete details can  be  found
              in the Clean Options section below.
       makecache
              Is  used  to  download  and make usable all the metadata for the
              currently enabled yum repos. If the argument "fast"  is  passed,
              then  we  just try to make sure the repos are current (much like
              "yum clean expire-cache").
       groups A command, new in 3.4.2, that collects all the subcommands  that
              act on groups together. Note that recent yum using distributions
              (Fedora-19+,  RHEL-7+)  have  configured   group_command=objects
              which changes how group commands act in some important ways.
              "group  install"  is used to install all of the individual pack-
              ages in a group, of the specified types (this works as if  you'd
              taken  each  of  those package names and put them on the command
              line for a "yum install" command).
               The group_package_types configuration  option  specifies  which
              types will be installed.
               If  you  wish  to "reinstall" a group so that you get a package
              that is currently blacklisted the easiest way to  do  that  cur-
              rently  is  to install the package manually and then run "groups
              mark packages-sync mygroup mypackagename" (or use yumdb  to  set
              the group_member of the package(s)).
              "group  update"  is  just an alias for group install, when using
              group_command=compat. This will install packages  in  the  group
              not  already  installed  and  upgrade  existing  packages.  With
              group_command=simple it  will  just  upgrade  already  installed
              packages.  With group_command=objects it will try to upgrade the
              group object, installing any available packages not  blacklisted
              (marked  '-' in group info) and will upgrade the installed pack-
              ages.
              "group list" is used to list the available groups from  all  yum
              repos.  When group_command=objects the group is installed if the
              user explicitly installed it (or used the group  mark*  commands
              to  mark  it  installed).  It does not need to have any packages
              installed.  When  not  using  group_command=objects  groups  are
              shown as "installed" if all mandatory packages are installed, or
              if a group doesn't  have  any  mandatory  packages  then  it  is
              installed  if  any  of  the  optional  or  default  package  are
              installed (when not in  group_command=objects  mode).   You  can
              pass optional arguments to the list/summary commands: installed,
              available, environment, language, packages, hidden and  ids  (or
              any  of  those  prefixed  by "no" to turn them off again).  Note
              that groups that are available but hidden  will  not  be  listed
              unless  'hidden'  keyword is passed to the command.  If you pass
              the -v option, to enable verbose mode,  then  the  groupids  are
              displayed  by  default (but "yum group list ids" is often easier
              to read).
              "group remove" is used to remove all of the packages in a group,
              unlike  "groupinstall" this will remove everything regardless of
              group_package_types. It is worth pointing out that packages  can
              be  in  more  than one group, so "group install X Y" followed by
              "group remove Y" does not do give you the same result as  "group
              install X".
              The groupremove_leaf_only configuration changes the behaviour of
              this command to only remove packages which  aren't  required  by
              something else.
              "group info" is used to give the description and package list of
              a group (and which type those packages are marked as). Note that
              you  can  use  the  yum-filter-data and yum-list-data plugins to
              get/use the data the other way  around  (i.e.  what  groups  own
              packages  need  updating).  If you pass the -v option, to enable
              verbose  mode,  then  the  package  names  are  matched  against
              installed/available packages similar to the list command.
              When  using group_command=objects, the info command will display
              markers next to each package saying how that package relates  to
              the group object. The meaning of these markers is:
              "-" = Package isn't installed, and won't be installed as part of
              the group (Eg.  "yum group install  foo  -pkgA"  or  "yum  group
              install  foo;  yum  remove  pkgA"  this will have pkgA marked as
              '-')
              "+" = Package isn't installed, but will be the next time you run
              "yum upgrade" or "yum group upgrade foo"
              "  "  = Package is installed, but wasn't installed via the group
              (so "group remove foo" won't remove it).
              "=" = Package is installed, and was installed via the group.
              you can move an installed package into an installed group  using
              either  "group  mark package-sync/package-sync-forced" or "yumdb
              set group_member".
              "group summary" is used to give a  quick  summary  of  how  many
              groups are installed and available.
              "group mark" and "group unmark" are used when groups are config-
              ured in group_command=objects mode. These  commands  then  allow
              you  to  alter yum's idea of which groups are installed, and the
              packages that belong to them.
              "group mark install" mark the group as installed. When installed
              "yum  upgrade" and "yum group upgrade" will install new packages
              for the group (only those packages  already  installed  will  be
              marked as members of the installed group to start with).
              "group mark remove" the opposite of mark install.
              "group mark packages" takes a group id (which must be installed)
              and marks any given installed packages (which aren't members  of
              a  group)  as  members of the group. Note that the data from the
              repositories does not need to specify the packages as  a  member
              of the group.
              "group  mark  packages-force"  works  like  mark  packages,  but
              doesn't care if the packages  are  already  members  of  another
              group.
              "group  mark blacklist" will blacklist all packages marked to be
              installed for a group. After this command a "yum group  upgrade"
              will not install any new packages as part of the group.
              "group mark convert-blacklist"
              "group mark convert-whitelist"
              "group mark convert" converts the automatic data you get without
              using groups as objects into groups as objects  data,  in  other
              words  this will make "yum --setopt=group_command=objects groups
              list" look as similar as possible to the current output of  "yum
              --setopt=group_command=simple  groups  list". This makes it much
              easier to convert to groups as objects without having  to  rein-
              stall.  For groups that are installed the whitelist variant will
              mark all uninstalled packages for the group as to  be  installed
              on  the next "yum group upgrade", the blacklist variant (current
              default) will mark them all as blacklisted.
              "group unmark packages" remove a package as a  member  from  any
              groups.
       shell  Is  used  to enter the 'yum shell', when a filename is specified
              the contents of that file is executed in  yum  shell  mode.  See
              yum-shell(8) for more info.
       resolvedep
              Is  used  to list packages providing the specified dependencies,
              at most one package is listed per dependency.  This  command  is
              maintained for legacy reasons only, use repoquery instead.
       localinstall
              Is  used  to  install  a set of local rpm files. If required the
              enabled repositories will be used to resolve dependencies.  Note
              that  the  install  command  will do a local install, if given a
              filename. This command is maintained for legacy reasons only.
       localupdate
              Is used to update the system by specifying local rpm files. Only
              the  specified  rpm  files  of which an older version is already
              installed will be installed, the  remaining  specified  packages
              will  be  ignored.  If required the enabled repositories will be
              used to resolve dependencies. Note that the update command  will
              do  a  local  update, if given a filename. This command is main-
              tained for legacy reasons only.
       reinstall
              Will reinstall the identically versioned package as is currently
              installed.   This does not work for "installonly" packages, like
              Kernels. reinstall  operates  on  groups,  files,  provides  and
              filelists just like the "install" command.
       downgrade
              Will  try  and  downgrade  a  package from the version currently
              installed to the previously highest version  (or  the  specified
              version).   The  depsolver will not necessarily work, but if you
              specify all the packages it should work (thus,  all  the  simple
              cases  will  work).  Also  this  does not work for "installonly"
              packages, like Kernels. downgrade  operates  on  groups,  files,
              provides,  filelists  and rpm files just like the "install" com-
              mand.
       swap   At it's simplest this is just a simpler way to remove one set of
              package(s)  and install another set of package(s) without having
              to use the "shell" command.  However you can  specify  different
              commands  to  call than just remove or install, and you can list
              multiple packages (it splits using the "--" marker).  Note  that
              option parsing will remove the first "--" in an argument list on
              the command line.

              Examples:
              swap foo bar
              swap -- remove foo -- install bar
              swap foo group install bar-grp
              swap -- group remove foo-grp -- group install bar-grp
       deplist
              Produces a list of all dependencies and  what  packages  provide
              those  dependencies  for the given packages. As of 3.2.30 it now
              just shows the latest version of each package that matches (this
              can  be changed by using --showduplicates) and it only shows the
              newest providers (which can be changed by using --verbose).
       repolist
              Produces a list of configured repositories. The  default  is  to
              list all enabled repositories. If you pass -v, for verbose mode,
              or use repoinfo then more information is listed.  If  the  first
              argument is 'enabled', 'disabled' or 'all' then the command will
              list those types of repos.
              You can pass repo id or name arguments, or  wildcards  which  to
              match  against  both of those. However if the id or name matches
              exactly then the repo will be listed even  if  you  are  listing
              enabled repos and it is disabled.
              In  non-verbose  mode  the first column will start with a '*' if
              the repo. has metalink data and the latest metadata is not local
              and  will  start  with  a  '!' if the repo. has metadata that is
              expired. For non-verbose mode the last column will also  display
              the  number  of packages in the repo. and (if there are any user
              specified excludes) the number of packages excluded.
              One last special feature of repolist, is that if you are in non-
              verbose mode then yum will ignore any repo errors and output the
              information it can get (Eg. "yum clean  all;  yum  -C  repolist"
              will  output something, although the package counts/etc. will be
              zeroed out).
       repoinfo
              This command works exactly like repolist -v.
       repository-packages
              Treat a repo. as a collection of packages  (like  "yum  groups")
              allowing the user to install or remove them as a single entity.
              "repository-packages  <repo>  list"  - Works like the "yum list"
              command, but only shows packages from the given repository.
              "repository-packages <repo> info" - Works like  the  "yum  info"
              command, but only shows packages from the given repository.
              "repository-packages  <repo> check-update" - Works like the "yum
              check-update" command, but only shows packages  from  the  given
              repository.
              "repository-packages  <repo> install" - Install all of the pack-
              ages in the repository,  basically  the  same  as:  yum  install
              $(repoquery  --repoid=<repo>  -a).   Specific packages/wildcards
              can be specified.
              "repository-packages <repo> upgrade" - Update all of  the  pack-
              ages  in  the  repository,  basically  the  same as: yum upgrade
              $(repoquery --repoid=<repo>  -a).   Specific  packages/wildcards
              can be specified.
              "repository-packages  <repo>  upgrade-to"  -  Update  all of the
              packages in the repository, basically the same as:  yum  upgrade
              $(repoquery --repoid=<repo> -a).  Without arguments it works the
              same as upgrade, with arguments it just interprets them  as  the
              versions you want to move to.
              "repository-packages  <repo>  reinstall-old"  - ReInstall all of
              the packages that are installed from the repository  and  avail-
              able  in  the  repository,  similar  to:  yum  reinstall $(yumdb
              search-quiet from_repo <repo>).
              "repository-packages <repo> move-to"  -  ReInstall  all  of  the
              packages  that  are  available  in the repository, basically the
              same as: yum reinstall $(repoquery --repoid=<repo> -a).
              "repository-packages <repo> reinstall" - Tries to do  reinstall-
              old, but if that produces no packages then tries move-to.
              "repo-pkgs  <repo>  remove"  - Remove all of the packages in the
              repository,   very   similar   to:   yum   remove    $(repoquery
              --repoid=<repo> -a). However the repopkgsremove_leaf_only option
              is obeyed.
              "repo-pkgs <repo> remove-or-reinstall" - Works like  remove  for
              any  package that doesn't have the exact same version in another
              repository. For any package that does have the  exact  NEVRA  in
              another repository then that version will be reinstalled.
              "repo-pkgs <repo> remove-or-distro-sync" - Works like remove for
              any package that doesn't exist in another  repository.  For  any
              package  that  does exist it tries to work as if distro-sync was
              called (with the repo. disabled).

       version
              Produces a "version" of the rpmdb, and of the enabled  reposito-
              ries if "all" is given as the first argument. You can also spec-
              ify version groups in the version-groups configuration file.  If
              you  pass  -v, for verbose mode, more information is listed. The
              version is calculated by taking an SHA1 hash of the packages (in
              sorted  order), and the checksum_type/checksum_data entries from
              the yumdb. Note that this rpmdb version is now also used signif-
              icantly within yum (esp. in yum history).
              The version command will now show "groups" of packages as a sep-
              arate version, and so takes sub-commands:
              "version grouplist" - List the defined version groups.
              "version groupinfo" - Get the complete list of  packages  within
              one or more version groups.
              "version installed" - This is the default, only show the version
              information for installed packages.
              "version available" - Only  show  the  version  information  for
              available packages.
              "version  all"  - Show the version information for installed and
              available packages.
              "version nogroups | nogroups-*" - Just  show  the  main  version
              information.
              "version  group-*"  - Just show the grouped version information,
              if more arguments are given then only show the  data  for  those
              groups.

       history
              The history command allows the user to view what has happened in
              past transactions (assuming the history_record config. option is
              set).  You can use info/list/packages-list/packages-info/summary
              to view what happened, undo/redo/rollback to act on that  infor-
              mation and new to start a new history file.
              The info/list/summary commands take either a transaction id or a
              package (with wildcards, as in Specifying  package  names),  all
              three  can  also  be passed no arguments. list can be passed the
              keyword "all" to list all the transactions.
              The info command can also take ranges of transaction ids, of the
              form  start..end, which will then display a merged history as if
              all the transactions in the range had happened at once.
              Eg. "history info 1..4" will merge the first  four  transactions
              and display them as a single transaction.
              The  packages-list/packages-info commands takes a package  (with
              wildcards, as in Specifying package names). And show  data  from
              the point of view of that package.
              The undo/redo/rollback commands take either a single transaction
              id or the keyword last and an offset from the  last  transaction
              (Eg.  if you've done 250 transactions, "last" refers to transac-
              tion 250, and "last-4" refers to  transaction  246).   The  redo
              command can also take some optional arguments before you specify
              the transaction. "force-reinstall" tells it reinstall any  pack-
              ages  that  were  installed  in  that  transaction (via install,
              upgrade or downgrade).   "force-remove"  tells  it  to  forcibly
              remove any packages that were updated or downgraded.
              The   undo/redo  commands  act  on  the  specified  transaction,
              undo'ing or repeating the work of that  transaction.  While  the
              rollback  command  will undo all transactions up to the point of
              the specified transaction. For example, if you have  3  transac-
              tions,  where  package  A; B and C where installed respectively.
              Then "undo 1" will try to remove package A, "redo 1" will try to
              install  package A (if it is not still installed), and "rollback
              1" will try to remove packages B and C. Note that after a "roll-
              back  1" you will have a fourth transaction, although the ending
              rpmdb version (see: yum version) should be the same in  transac-
              tions 1 and 4.
              The addon-info command takes a transaction ID, and the packages-
              list command takes a package (with wildcards).
              The stats command shows some statistics about the  current  his-
              tory DB.
              The  sync  commands  allows  you  to change the rpmdb/yumdb data
              stored for any installed packages, to whatever is in the current
              rpmdb/yumdb (this is mostly useful when this data was not stored
              when the package went into the history DB).
              In "history list" you can change the behaviour of the 2nd column
              via the configuration option history_list_view.
              In  "history  list"  output  the  Altered column also gives some
              extra information if there  was  something  not  good  with  the
              transaction (this is also shown at the end of the package column
              in the packages-list command).
              > - The rpmdb was changed, outside yum, after the transaction.
              < - The rpmdb was changed, outside yum, before the transaction.
              * - The transaction aborted before completion.
              # - The transaction completed, but with a non-zero status.
              E - The transaction completed fine, but had warning/error output
              during the transaction.
              P - The transaction completed fine, but problems already existed
              in the rpmdb.
              s -  The  transaction  completed  fine,  but  --skip-broken  was
              enabled and had to skip some packages.

       load-transaction
              This  command  will  re-load  a saved yum transaction file, this
              allows you to run a transaction on one machine and then  use  it
              on  another.  The two common ways to get a saved yum transaction
              file are from "yum -q history addon-info last saved_tx"  or  via
              the  automatic saves in $TMPDIR/yum_save_tx.* when a transaction
              is solved but not run.
              Running the command without an argument, or a  directory  as  an
              argument will try and list the possible files available to load.
              Showing if the  packages  are  still  available,  if  the  rpmdb
              matches  the current rpmdb, how many transaction install/removes
              members are in the saved transaction and what the filename is.

       updateinfo
              This command has a bunch of sub-commands to act on  the  update-
              info in the repositories. The simplest commands are:
               yum updateinfo info [all | available | installed | updates]
               yum updateinfo list [all | available | installed | updates]
                yum  updateinfo  [summary]  [all  |  available  |  installed |
              updates]
              which all display information about the available update  infor-
              mation  relevant  to your machine (including anything installed,
              if you supply "all").
               * updates Is used to display information about  advisories  for
              packages that can be updated. This is the default.
               * installed Is used to display information only about installed
              advisories.
               * available Is used to display information about advisories for
              packages available for updating or installation.
                *  all Is used to display information about both installed and
              available advisories.
              They all take as arguments:
               * <advisory> [advisory...]   Is  used  to  display  information
              about one or more advisories.
                * <package> [package...]  Is used to display information about
              one or more packages.
               * bugzillas / bzs Is the subset of the updateinfo  information,
              pertaining to the bugzillas.
                * cves Is the subset of the updateinfo information, pertaining
              to the CVEs.
               * enhancement Is the subset of the updateinfo information, per-
              taining to enhancements.
                * bugfix Is the subset of the updateinfo information, pertain-
              ing to bugfixes.
               * security / sec Is the subset of the  updateinfo  information,
              pertaining to security.
                *  severity  /  sev Include security relevant packages of this
              severity.
               * recommended Is the subset of the updateinfo information, per-
              taining to recommended updates.
                *  new-packages  Is  the subset of the updateinfo information,
              pertaining to new packages. These  are  packages  which  weren't
              available at the initial release of your distribution.
              There  are also three sub-commands to remove packages when using
              "yum shell", they are:
               yum updateinfo remove-pkgs-ts
               yum updateinfo exclude-updates
               yum updateinfo exclude-all
              they all take the following arguments:
              * [bzs=foo] [advisories=foo] [cves=foo]  [security-severity=foo]
              [security] [bugfix]
              and  finally  there  is  a command to manually check the running
              kernel against updateinfo data:
               yum updateinfo check-running-kernel

       fssnapshot or fssnap
              This command has a few sub-commands to act on the  LVM  data  of
              the  host,  to list snapshots and to create and remove them. The
              simplest commands, to display information about  the  configured
              LVM snapshotable devices, are:
               yum fssnapshot [summary]
               yum fssnapshot list
               yum fssnapshot have-space
              then you can create and delete snapshots using:
               yum fssnapshot create
               yum fssnapshot delete <device(s)>
              Configuration    Options:   fssnap_automatic_pre,   fssnap_auto-
              matic_post,   fssnap_automatic_keep,   fssnap_percentage,   fss-
              nap_devices, fssnap_abort_on_errors

       fs     This  command  has  a  few sub-commands to act on the filesystem
              data of the host, mainly  for  removing  languages/documentation
              for minimal installs:
               yum fs filters
               yum fs filter languages en:es
               yum fs filter documentation
               yum fs refilter [package(s)]
               yum fs refilter-cleanup [package(s)]
               yum fs du [path]
               yum fs status [path]
               yum fs diff [path]

              the first 3 being a simple interface to change yum.conf altering
              the  tsflags  and  override_install_langs  configurations.   The
              refilter  command is an optimized way of calling "yum reinstall"
              to reinstall the packages with  the  new  filters  applied.  The
              refilter-cleanup  command is needed because rpm doesn't actually
              remove the files on reinstall, as it  should.  And  the  du/sta-
              tus/diff  commands  are included so you can easily see the space
              used/saved and any other changes.

       check  Checks the local rpmdb and produces information on any  problems
              it  finds.  You can pass the check command the arguments "depen-
              dencies", "duplicates", "obsoleted" or "provides", to limit  the
              checking  that  is  performed  (the  default is "all" which does
              all).

       help   Produces help, either for all commands or  if  given  a  command
              name then the help for that particular command.
GENERAL OPTIONS
       Most  command  line  options can be set using the configuration file as
       well and the descriptions indicate the necessary  configuration  option
       to set.
       -h, --help
              Help; display a help message and then quit.
       -y, --assumeyes
              Assume  yes;  assume that the answer to any question which would
              be asked is yes.
              Configuration Option: assumeyes
       --assumeno
              Assume no; assume that the answer to any question which would be
              asked  is no. This option overrides assumeyes, but is still sub-
              ject to alwaysprompt.
              Configuration Option: assumeno
       -c, --config=[config file]
              Specifies the config file location - can take HTTP and FTP  URLs
              and local file paths.
       -q, --quiet
              Run without output.  Note that you likely also want to use -y.
       -v, --verbose
              Run with a lot of debugging output.
       -d, --debuglevel=[number]
              Sets  the  debugging  level  to  [number] - turns up or down the
              amount of things that are printed. Practical range: 0 - 10
              Configuration Option: debuglevel
       -e, --errorlevel=[number]
              Sets the error level to [number] Practical range 0 - 10. 0 means
              print only critical errors about which you must be told. 1 means
              print all errors, even ones that are not  overly  important.  1+
              means print more errors (if any) -e 0 is good for cron jobs.
              Configuration Option: errorlevel
       --rpmverbosity=[name]
              Sets the debug level to [name] for rpm scriptlets. 'info' is the
              default, other options are:  'critical',  'emergency',  'error',
              'warn' and 'debug'.
              Configuration Option: rpmverbosity
       -R, --randomwait=[time in minutes]
              Sets  the maximum amount of time yum will wait before performing
              a command - it randomizes over the time.
       -C, --cacheonly
              Tells yum to run entirely from system cache; does  not  download
              or  update  metadata.  When this is used by a non-root user, yum
              will run entirely from  user  cache  in  $TMPDIR.   This  option
              doesn't  stop  yum  from  updating  user cache from system cache
              locally if the latter is newer (this is always done when running
              as a user).
       --version
              Reports  the  yum  version number and installed package versions
              for everything in history_record_packages (can be  added  to  by
              plugins).
       --showduplicates
              Doesn't  limit  packages  to  their latest versions in the info,
              list and search commands (will also affect plugins which use the
              doPackageLists() API).
       --installroot=root
              Specifies  an  alternative  installroot,  relative  to which all
              packages will be installed. Think of  this  like  doing  "chroot
              <root> yum" except using --installroot allows yum to work before
              the chroot is created.  Note: You  may  also  want  to  use  the
              option --releasever=/ when creating the installroot as otherwise
              the $releasever  value  is  taken  from  the  rpmdb  within  the
              installroot (and thus. will be empty, before creation).
              Configuration Option: installroot
       --enablerepo=repoidglob
              Enables  specific repositories by id or glob that have been dis-
              abled in the configuration file using the enabled=0 option.
              Configuration Option: enabled
       --disablerepo=repoidglob
              Disables specific repositories by id or glob.
              Configuration Option: enabled
       --obsoletes
              This option only has affect for  an  update,  it  enables  yum's
              obsoletes  processing logic. For more information see the update
              command above.
              Configuration Option: obsoletes
       -x, --exclude=package
              Exclude a specific package by name or glob  from  all  reposito-
              ries, so yum works as if that package was never in the reposito-
              ries.  This is commonly used so  a  package  isn't  upgraded  or
              installed  accidentally,  but  can be used to remove packages in
              any way that "yum list" will show packages.
              Can be disabled using --disableexcludes.  Configuration  Option:
              exclude, includepkgs
       --color=[always|auto|never]
              Display  colorized output automatically, depending on the output
              terminal, always (using ANSI codes) or  never.  Note  that  some
              commands  (Eg.  list  and info) will do a little extra work when
              color is enabled.  Configuration Option: color
       --disableexcludes=[all|main|repoid]
              Disable the excludes defined in your config files. Takes one  of
              three options:
              all == disable all excludes
              main == disable excludes defined in [main] in yum.conf
              repoid == disable excludes defined for that repo
       --disableincludes=[all|repoid]
              Disable  the includes defined in your config files. Takes one of
              two options:
              all == disable all includes
              repoid == disable includes defined for that repo
       --disableplugin=plugin
              Run with one or more plugins disabled, the argument is  a  comma
              separated list of wildcards to match against plugin names.
       --noplugins
              Run with all plugins disabled.
              Configuration Option: plugins
       --nogpgcheck
              Run with GPG signature checking disabled.
              Configuration Option: gpgcheck
       --skip-broken
              Resolve  depsolve problems by removing packages that are causing
              problems from the transaction.
              Configuration Option: skip_broken
       --releasever=version
              Pretend the current release version is the given string. This is
              very  useful  when combined with --installroot. You can also use
              --releasever=/ to take the releasever information  from  outside
              the  installroot.  Note that with the default upstream cachedir,
              of /var/cache/yum, using this option  will  corrupt  your  cache
              (and  you  can use $releasever in your cachedir configuration to
              stop this).
       -t, --tolerant
              This option makes  yum  go  slower,  checking  for  things  that
              shouldn't  be  possible  making  it  more  tolerant  of external
              errors.
       --downloadonly
              Don't update, just download. This is done in the background,  so
              the  yum lock is released for other operations. This can also be
              chosen by typing 'd'ownloadonly at the transaction  confirmation
              prompt.
       --downloaddir=directory
              Specifies an alternate directory to store packages.
       --setopt=option=value
              Set  any  config option in yum config or repo files. For options
              in the global config just use:  --setopt=option=value  for  repo
              options use: --setopt=repoid.option=value
       --security
              This  option  includes  packages  that  say  they fix a security
              issue, in updates.
       --advisory=ADVS, --advisories=ADVS
              This option includes in updates packages  corresponding  to  the
              advisory ID, Eg. FEDORA-2201-123.
       --bz=BZS
              This  option  includes  in  updates packages that say they fix a
              Bugzilla ID, Eg. 123.
       --cve=CVES
              This option includes in updates packages that say they fix a CVE
              -      Common      Vulnerabilities      and     Exposures     ID
              (http://cve.mitre.org/about/), Eg. CVE-2201-0123.
       --bugfix
              This option includes in updates packages that  say  they  fix  a
              bugfix issue.
       --sec-severity=SEVS, --secseverity=SEVS
              This  option  includes  in updates security relevant packages of
              the specified severity.

LIST OPTIONS
       The following are the ways which you can invoke yum in list mode.  Note
       that  all list commands include information on the version of the pack-
       age.
       OUTPUT

              The format of the output of yum list is:
              name.arch [epoch:]version-release  repo or @installed-from-repo
              Note that if the  repo  cannot  be  determined,  "installed"  is
              printed instead.

       yum list [all | glob_exp1] [glob_exp2] [...]
              List all available and installed packages.
       yum list available [glob_exp1] [...]
              List  all  packages  in  the  yum  repositories  available to be
              installed.
       yum list updates [glob_exp1] [...]
              List all packages with updates available in  the  yum  reposito-
              ries.
       yum list installed [glob_exp1] [...]
              List  the  packages  specified by args.  If an argument does not
              match the name of an available package, it is assumed  to  be  a
              shell-style glob and any matches are printed.
       yum list extras [glob_exp1] [...]
              List the packages installed on the system that are not available
              in any yum repository listed in the config file.
       yum list distro-extras [glob_exp1] [...]
              List the packages installed on the system that  are  not  avail-
              able, by name, in any yum repository listed in the config file.
       yum list obsoletes [glob_exp1] [...]
              List  the packages installed on the system that are obsoleted by
              packages in any yum repository listed in the config file.
       yum list recent
              List packages recently added  into  the  repositories.  This  is
              often  not  helpful, but what you may really want to use is "yum
              list-updateinfo new" from the security yum plugin.
SPECIFYING PACKAGE NAMES
       A package can be referred to for install, update,  remove,  list,  info
       etc with any of the following as well as globs of any of the following:
              name
              name.arch
              name-ver
              name-ver-rel
              name-ver-rel.arch
              name-epoch:ver-rel.arch
              epoch:name-ver-rel.arch
              For example: yum remove kernel-2.4.1-10.i686
                   this will remove this specific kernel-ver-rel.arch.
              Or:          yum list available 'foo*'
                   will  list  all  available packages that match 'foo*'. (The
              single quotes will keep your shell from expanding the globs.)
CLEAN OPTIONS
       The following are the ways which you can invoke yum in clean mode.
       Note that these commands only operate on the currently enabled  reposi-
       tories  within  the  current  cachedir  (that is, with any substitution
       variables such as $releasever expanded to their  runtime  values).   To
       clean   specific   repositories,  use  --enablerepo,  --disablerepo  or
       --releasever accordingly.  Note, however,  that  untracked  (no  longer
       configured)  repositories  cannot  be cleaned this way; they have to be
       removed manually.

       yum clean expire-cache
              Eliminate the local data  saying  when  the  metadata  and  mir-
              rorlists  were  downloaded  for  each  repo. This means yum will
              revalidate the cache for each repo. next time it is  used.  How-
              ever  if  the  cache  is  still  valid,  nothing significant was
              deleted.

       yum clean packages
              Eliminate any cached packages from the system.  Note that  pack-
              ages are not automatically deleted after they are downloaded.

       yum clean headers
              Eliminate  all  of  the  header files, which old versions of yum
              used for dependency resolution.

       yum clean metadata
              Eliminate all of the files  which  yum  uses  to  determine  the
              remote  availability  of  packages. Using this option will force
              yum to download all the metadata the next time it is run.

       yum clean dbcache
              Eliminate the sqlite cache used for faster access  to  metadata.
              Using this option will force yum to download the sqlite metadata
              the next time it is run, or  recreate  the  sqlite  metadata  if
              using an older repo.

       yum clean rpmdb
              Eliminate any cached data from the local rpmdb.

       yum clean plugins
              Tell any enabled plugins to eliminate their cached data.

       yum clean all
              Does  all  of the above.  As a convenience, if this command does
              not result in a completely empty cache due to  the  restrictions
              outlined  at  the  beginning  of this section, a message will be
              printed, saying how much disk space can be reclaimed by cleaning
              the  remaining repos manually.  For this purpose, a repo is con-
              sidered clean when its disk usage doesn't exceed 64KB  (that  is
              to account for directory entries and tiny metadata files such as
              "productid" that are never cleaned).

EXAMPLES
       To list all updates that are security relevant, and get a  return  code
       on whether there are security updates use:
              yum --security check-update
       To  upgrade  packages that have security errata (upgrades to the latest
       available package) use:
              yum --security update
       To upgrade packages that have security errata  (upgrades  to  the  last
       security errata package) use:
              yum --security update-minimal
       To get a list of all BZs that are fixed for packages you have installed
       use:
              yum updateinfo list bugzillas
       To get a list of all security advisories, including the ones  you  have
       already installed use:
              yum updateinfo list all security
       To get the information on advisory FEDORA-2707-4567 use:
              yum updateinfo info FEDORA-2707-4567
       For  Red  Hat  advisories, respin suffixes are also accepted in the ID,
       although they won't have any effect on the actual  respin  selected  by
       yum,  as  it will always select the latest one available.  For example,
       if you use:
              yum updateinfo info RHSA-2016:1234-2
       while RHSA-2016:1234-3 has been shipped already, yum  will  select  the
       latter  (provided your updateinfo.xml is current).  The same would hap-
       pen if you just specified RHSA-2016:1234.  That said, there's  no  need
       for you to specify or care about the suffix at all.
       To  update  packages  to  the  latest  version  which contain fixes for
       Bugzillas 123, 456 and 789; and all security updates use:
              yum --bz 123 --bz 456 --bz 789 --security update
       To update to the packages which just update Bugzillas 123, 456 and 789;
       and all security updates use:
              yum --bz 123 --bz 456 --bz 789 --security update-minimal
       To  get  an  info  list  of the latest packages which contain fixes for
       Bugzilla 123; CVEs CVE-2207-0123 and CVE-2207-3210;  and  Fedora  advi-
       sories FEDORA-2707-4567 and FEDORA-2707-7654 use:
              yum  --bz 123 --cve CVE-2207-0123 --cve CVE-2207-3210 --advisory
              FEDORA-2707-4567 --advisory FEDORA-2707-7654 info updates
       To get a list of packages which are "new".
              yum updateinfo list new
       To get a summary of advisories you haven't installed yet use:
              yum updateinfo summary

PLUGINS
       Yum can be extended through the use of plugins. A plugin  is  a  Python
       ".py"  file  which  is installed in one of the directories specified by
       the pluginpath option in yum.conf. For a plugin to work, the  following
       conditions must be met:
       1.  The plugin module file must be installed in the plugin path as just
       described.
       2. The global plugins option in /etc/yum.conf must be set to `1'.
       3. A configuration file for the plugin must exist  in  /etc/yum/plugin-
       conf.d/<plugin_name>.conf and the enabled setting in this file must set
       to `1'. The minimal content for such a configuration file is:
              [main]
              enabled = 1
       See the yum.conf(5) man page for more  information  on  plugin  related
       configuration options.

FILES
       /etc/yum.conf
       /etc/yum/version-groups.conf
       /etc/yum.repos.d/
       /etc/yum/pluginconf.d/
       /var/cache/yum/

SEE ALSO
       pkcon (1)
       yum.conf (5)
       yum-updatesd (8)
       package-cleanup (1)
       repoquery (1)
       yum-complete-transaction (1)
       yumdownloader (1)
       yum-utils (1)
       yum-langpacks (1)
       http://yum.baseurl.org/
       http://yum.baseurl.org/wiki/Faq
       yum search yum

AUTHORS
       See the Authors file included with this program.

BUGS
       There  of course aren't any bugs, but if you find any, you should first
       consult the FAQ mentioned  above  and  then  email  the  mailing  list:
       yum AT lists.org or filed in bugzilla.

Seth Vidal                                                              yum(8)