virt-what(images) - phpMan

VIRT-WHAT(1)                Virtualization Support                VIRT-WHAT(1)

NAME
       virt-what - detect if we are running in a virtual machine
SUMMARY
       virt-what [options]
DESCRIPTION
       "virt-what" is a shell script which can be used to detect if the
       program is running in a virtual machine.
       The program prints out a list of "facts" about the virtual machine,
       derived from heuristics.  One fact is printed per line.
       If nothing is printed and the script exits with code 0 (no error), then
       it can mean either that the program is running on bare-metal or the
       program is running inside a type of virtual machine which we don't know
       about or cannot detect.
FACTS
       aws Amazon Web Services cloud guest.
           Status: contributed by Qi Guo.
       bhyve
           This is a bhyve (FreeBSD hypervisor) guest.
           Status: contributed by Leonardo Brondani Schenkel.
       docker
           This is a Docker container.
           Status: confirmed by Charles Nguyen
       hyperv
           This is Microsoft Hyper-V hypervisor.
           Status: confirmed by RWMJ
       ibm_power-kvm
           This is an IBM POWER KVM guest.
           Status: contributed by Adrian Likins.
       ibm_power-lpar_shared
       ibm_power-lpar_dedicated
           This is an IBM POWER LPAR (hardware partition) in either shared or
           dedicated mode.
           Status: contributed by Adrian Likins.
       ibm_systemz
           This is an IBM SystemZ (or other S/390) hardware partitioning
           system.  Additional facts listed below may also be printed.
       ibm_systemz-direct
           This is Linux running directly on a IBM SystemZ hardware
           partitioning system.
           This is expected to be a highly unusual configuration - if you see
           this result you should treat it with suspicion.
           Status: not confirmed
       ibm_systemz-lpar
           This is Linux running directly on an LPAR on an IBM SystemZ
           hardware partitioning system.
           Status: confirmed by Thomas Huth
       ibm_systemz-zvm
           This is a z/VM guest running in an LPAR on an IBM SystemZ hardware
           partitioning system.
           Status: confirmed by RWMJ using a Fedora guest running in z/VM
       ibm_systemz-kvm
           This is a KVM guest running on an IBM System Z hardware system.
           Status: contributed by Thomas Huth
       ldoms
           The guest appears to be running on an Linux SPARC system with
           Oracle VM Server for SPARC (Logical Domains) support.
           Status: contributed by Darren Kenny
       ldoms-control
           The is the Oracle VM Server for SPARC (Logical Domains) control
           domain.
           Status: contributed by Darren Kenny
       ldoms-guest
           The is the Oracle VM Server for SPARC (Logical Domains) guest
           domain.
           Status: contributed by Darren Kenny
       ldoms-io
           The is the Oracle VM Server for SPARC (Logical Domains) I/O domain.
           Status: contributed by Darren Kenny
       ldoms-root
           The is the Oracle VM Server for SPARC (Logical Domains) Root
           domain.
           Status: contributed by Darren Kenny
       linux_vserver
           This is printed for backwards compatibility with older virt-what
           which could not distinguish between a Linux VServer container guest
           and host.
       linux_vserver-guest
           This process is running in a Linux VServer container.
           Status: contributed by BarXX Metin
       linux_vserver-host
           This process is running as the Linux VServer host (VxID 0).
           Status: contributed by BarXX Metin and Elan Ruusamaee
       lxc This process is running in a Linux LXC container.
           Status: contributed by Marc Fournier
       kvm This guest is running on the KVM hypervisor using hardware
           acceleration.
           Note that if the hypervisor is using software acceleration you
           should not see this, but should see the "qemu" fact instead.
           Status: confirmed by RWMJ.
       lkvm
           This guest is running on the KVM hypervisor using hardware
           acceleration, and the userspace component of the hypervisor is lkvm
           (a.k.a kvmtool).
           Status: contributed by Andrew Jones
       nutanix_ahv
           The guest is running inside Nutanix Acropolis Hypervisor (AHV).
           Status: confirmed by RWMJ.
       openvz
           The guest appears to be running inside an OpenVZ or Virtuozzo
           container.
           Status: contributed by Evgeniy Sokolov
       ovirt
           The guest is running on an oVirt node.  (See also "rhev" below).
           Status: contributed by RWMJ, not confirmed
       parallels
           The guest is running inside Parallels Virtual Platform (Parallels
           Desktop, Parallels Server).
           Status: contributed by Justin Clift
       powervm_lx86
           The guest is running inside IBM PowerVM Lx86 Linux/x86 emulator.
           Status: data originally supplied by Jeffrey Scheel, confirmed by
           Yufang Zhang and RWMJ
       qemu
           This is QEMU hypervisor using software emulation.
           Note that for KVM (hardware accelerated) guests you should not see
           this.
           Status: confirmed by RWMJ.
       rhev
           The guest is running on a Red Hat Enterprise Virtualization (RHEV)
           node.
           Status: confirmed by RWMJ
       uml This is a User-Mode Linux (UML) guest.
           Status: contributed by Laurent Leonard
       virt
           Some sort of virtualization appears to be present, but we are not
           sure what it is.  In some very rare corner cases where we know that
           virtualization is hard to detect, we will try a timing attack to
           see if certain machine instructions are running much more slowly
           than they should be, which would indicate virtualization.  In this
           case, the generic fact "virt" is printed.
       virtage
           This is Hitachi Virtualization Manager (HVM) Virtage hardware
           partitioning system.
           Status: data supplied by Bhavna Sarathy, not confirmed
       virtualbox
           This is a VirtualBox guest.
           Status: contributed by Laurent Leonard
       virtualpc
           The guest appears to be running on Microsoft VirtualPC.
           Status: not confirmed
       vmm This is a vmm (OpenBSD hypervisor) guest.
           Status: contributed by Jasper Lievisse Adriaanse.
       vmware
           The guest appears to be running on VMware hypervisor.
           Status: confirmed by RWMJ
       xen The guest appears to be running on Xen hypervisor.
           Status: confirmed by RWMJ
       xen-dom0
           This is the Xen dom0 (privileged domain).
           Status: confirmed by RWMJ
       xen-domU
           This is a Xen domU (paravirtualized guest domain).
           Status: confirmed by RWMJ
       xen-hvm
           This is a Xen guest fully virtualized (HVM).
           Status: confirmed by RWMJ
EXIT STATUS
       Programs that use or wrap "virt-what" should check that the exit status
       is 0 before they attempt to parse the output of the command.
       A non-zero exit status indicates some error, for example, an
       unrecognized command line argument.  If the exit status is non-zero
       then the output "facts" (if any were printed) cannot be guaranteed and
       should be ignored.
       The exit status does not have anything to do with whether the program
       is running on baremetal or under virtualization, nor with whether
       "virt-what" managed detection "correctly" (which is basically
       unknowable given the large variety of virtualization systems out there
       and that some systems deliberately emulate others).
RUNNING VIRT-WHAT FROM OTHER PROGRAMS
       "virt-what" is designed so that you can easily run it from other
       programs or wrap it up in a library.
       Your program should check the exit status (see the section above).
       Some programming languages (notably Python: issue 1652) erroneously
       mask the "SIGPIPE" signal and do not restore it when executing
       subprocesses.  "virt-what" is a shell script and some shell commands do
       not work correctly when you do this.  You may see warnings from
       "virt-what" similar to this:
        echo: write error: Broken pipe
       The solution is to set the "SIGPIPE" signal handler back to "SIG_DFL"
       before running "virt-what".
IMPORTANT NOTE
       Most of the time, using this program is the wrong thing to do.  Instead
       you should detect the specific features you actually want to use.  (As
       an example, if you wanted to issue Xen hypervisor commands you would
       look for the "/proc/xen/privcmd" file).
       However people keep asking for this, so we provide it.  There are a few
       legitimate uses:
       Bug reporting tool
           If you think that virtualization could affect how your program
           runs, then you might use "virt-what" to report this in a bug
           reporting tool.
       Status display and monitoring tools
           You might include this information in status and monitoring
           programs.
       System tuning (sometimes)
           You might use this program to tune an operating system so it runs
           better as a virtual machine of a particular hypervisor.  However if
           installing paravirtualized drivers, it's better to check for the
           specific features your drivers need (eg. for the presence of PCI
           devices).
SEE ALSO
       <http://people.redhat.com/~rjones/virt-what/>;,
       <http://www.vmware.com/>;,
       <http://www.microsoft.com/windows/products/winfamily/virtualpc>;,
       <http://xensource.com/>;, <http://bellard.org/qemu/>;,
       <http://kvm.qumranet.com/>;, <http://openvz.org/>;
AUTHORS
       Richard W.M. Jones <rjones @ redhat . com>
COPYRIGHT
       (C) Copyright 2008-2015 Red Hat Inc.,
       <http://people.redhat.com/~rjones/virt-what/>;
       This program is free software; you can redistribute it and/or modify it
       under the terms of the GNU General Public License as published by the
       Free Software Foundation; either version 2 of the License, or (at your
       option) any later version.
       This program is distributed in the hope that it will be useful, but
       WITHOUT ANY WARRANTY; without even the implied warranty of
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
       General Public License for more details.
       You should have received a copy of the GNU General Public License along
       with this program; if not, write to the Free Software Foundation, Inc.,
       675 Mass Ave, Cambridge, MA 02139, USA.
REPORTING BUGS
       Bugs can be viewed on the Red Hat Bugzilla page:
       <https://bugzilla.redhat.com/>;.
       If you find a bug in virt-what, please follow these steps to report it:
       1. Check for existing bug reports
           Go to <https://bugzilla.redhat.com/>; and search for similar bugs.
           Someone may already have reported the same bug, and they may even
           have fixed it.
       2. Capture debug and error messages
           Run
            virt-what > virt-what.log 2>&1
           and keep virt-what.log.  It may contain error messages which you
           should submit with your bug report.
       3. Get version of virt-what.
           Run
            virt-what --version
       4. Submit a bug report.
           Go to <https://bugzilla.redhat.com/>; and enter a new bug.  Please
           describe the problem in as much detail as possible.
           Remember to include the version numbers (step 3) and the debug
           messages file (step 2) and as much other detail as possible.
       5. Assign the bug to rjones @ redhat.com
           Assign or reassign the bug to rjones @ redhat.com (without the
           spaces).  You can also send me an email with the bug number if you
           want a faster response.

virt-what-1.18                    2021-08-31                      VIRT-WHAT(1)