stropts.h(feed) - phpMan

<stropts.h>(0P)            POSIX Programmer's Manual           <stropts.h>(0P)

NAME
       stropts.h - STREAMS interface (STREAMS)
SYNOPSIS
       #include <stropts.h>
DESCRIPTION
       The  <stropts.h>  header  shall  define  the  bandinfo  structure  that
       includes at least the following members:

              unsigned char  bi_pri   Priority band.
              int            bi_flag  Flushing type.
       The <stropts.h> header shall define the strpeek structure that includes
       at least the following members:

              struct strbuf  ctlbuf   The control portion of the message.
              struct strbuf  databuf  The data portion of the message.
              t_uscalar_t    flags    RS_HIPRI or 0.
       The  <stropts.h> header shall define the strbuf structure that includes
       at least the following members:

              int    maxlen  Maximum buffer length.
              int    len     Length of data.
              char  *buf     Pointer to buffer.
       The <stropts.h> header shall  define  the  strfdinsert  structure  that
       includes at least the following members:

              struct strbuf  ctlbuf   The control portion of the message.
              struct strbuf  databuf  The data portion of the message.
              t_uscalar_t    flags    RS_HIPRI or 0.
              int            fildes   File descriptor of the other STREAM.
              int            offset   Relative location of the stored value.
       The  <stropts.h>  header  shall  define  the  strioctl  structure  that
       includes at least the following members:

              int    ic_cmd     ioctl() command.
              int    ic_timout  Timeout for response.
              int    ic_len     Length of data.
              char  *ic_dp      Pointer to buffer.
       The <stropts.h>  header  shall  define  the  strrecvfd  structure  that
       includes at least the following members:

              int    fda  Received file descriptor.
              uid_t  uid  UID of sender.
              gid_t  gid  GID of sender.
       The uid_t and gid_t types shall be defined through typedef as described
       in <sys/types.h> .
       The <stropts.h> header shall  define  the  t_scalar_t  and  t_uscalar_t
       types,  respectively,  as  signed  and  unsigned  opaque types of equal
       length of at least 32 bits.
       The  <stropts.h>  header  shall  define  the  str_list  structure  that
       includes at least the following members:

              int                sl_nmods    Number of STREAMS module names.
              struct str_mlist  *sl_modlist  STREAMS module names.
       The  <stropts.h>  header  shall  define  the  str_mlist  structure that
       includes at least the following member:

              char  l_name[FMNAMESZ+1]  A STREAMS module name.
       At least the following macros shall be defined for use as  the  request
       argument to ioctl():
       I_PUSH Push a STREAMS module.
       I_POP  Pop a STREAMS module.
       I_LOOK Get the top module name.
       I_FLUSH
              Flush a STREAM.
       I_FLUSHBAND
              Flush one band of a STREAM.
       I_SETSIG
              Ask for notification signals.
       I_GETSIG
              Retrieve current notification signals.
       I_FIND Look for a STREAMS module.
       I_PEEK Peek at the top message on a STREAM.
       I_SRDOPT
              Set the read mode.
       I_GRDOPT
              Get the read mode.
       I_NREAD
              Size the top message.
       I_FDINSERT
              Send implementation-defined information about another STREAM.
       I_STR  Send a STREAMS ioctl().
       I_SWROPT
              Set the write mode.
       I_GWROPT
              Get the write mode.
       I_SENDFD
              Pass a file descriptor through a STREAMS pipe.
       I_RECVFD
              Get a file descriptor sent via I_SENDFD.
       I_LIST Get all the module names on a STREAM.
       I_ATMARK
              Is the top message "marked''?
       I_CKBAND
              See if any messages exist in a band.
       I_GETBAND
              Get the band of the top message on a STREAM.
       I_CANPUT
              Is a band writable?
       I_SETCLTIME
              Set close time delay.
       I_GETCLTIME
              Get close time delay.
       I_LINK Connect two STREAMs.
       I_UNLINK
              Disconnect two STREAMs.
       I_PLINK
              Persistently connect two STREAMs.
       I_PUNLINK
              Dismantle a persistent STREAMS link.

       At least the following macros shall be defined for use with I_LOOK:
       FMNAMESZ
              The  minimum  size in bytes of the buffer referred to by the arg
              argument.

       At least the following macros shall be defined for use with I_FLUSH:
       FLUSHR Flush read queues.
       FLUSHW Flush write queues.
       FLUSHRW
              Flush read and write queues.

       At least the following macros shall be defined for use with I_SETSIG:
       S_RDNORM
              A normal (priority band set to 0) message  has  arrived  at  the
              head of a STREAM head read queue.
       S_RDBAND
              A  message with a non-zero priority band has arrived at the head
              of a STREAM head read queue.
       S_INPUT
              A message, other than a high-priority message,  has  arrived  at
              the head of a STREAM head read queue.
       S_HIPRI
              A high-priority message is present on a STREAM head read queue.
       S_OUTPUT
              The write queue for normal data (priority band 0) just below the
              STREAM head is no longer full. This notifies  the  process  that
              there  is room on the queue for sending (or writing) normal data
              downstream.
       S_WRNORM
              Equivalent to S_OUTPUT.
       S_WRBAND
              The write queue for a non-zero  priority  band  just  below  the
              STREAM head is no longer full.
       S_MSG  A  STREAMS  signal  message  that  contains  the  SIGPOLL signal
              reaches the front of the STREAM head read queue.
       S_ERROR
              Notification of an error condition reaches the STREAM head.
       S_HANGUP
              Notification of a hangup reaches the STREAM head.
       S_BANDURG
              When used in conjunction  with  S_RDBAND,  SIGURG  is  generated
              instead  of SIGPOLL when a priority message reaches the front of
              the STREAM head read queue.

       At least the following macros shall be defined for use with I_PEEK:
       RS_HIPRI
              Only look for high-priority messages.

       At least the following macros shall be defined for use with I_SRDOPT:
       RNORM  Byte-STREAM mode, the default.
       RMSGD  Message-discard mode.
       RMSGN  Message-non-discard mode.
       RPROTNORM
              Fail read() with [EBADMSG] if a  message  containing  a  control
              part is at the front of the STREAM head read queue.
       RPROTDAT
              Deliver  the  control  part  of a message as data when a process
              issues a read().
       RPROTDIS
              Discard the control part of a message, delivering any data part,
              when a process issues a read().

       At least the following macros shall be defined for use with I_SWOPT:
       SNDZERO
              Send  a zero-length message downstream when a write() of 0 bytes
              occurs.

       At least the following macros shall be defined for use with I_ATMARK:
       ANYMARK
              Check if the message is marked.
       LASTMARK
              Check if the message is the last one marked on the queue.

       At least the following macros shall be defined for use with I_UNLINK:
       MUXID_ALL
              Unlink all STREAMs linked to the STREAM associated with fildes.

       The  following  macros  shall  be  defined  for  getmsg(),   getpmsg(),
       putmsg(), and putpmsg():
       MSG_ANY
              Receive any message.
       MSG_BAND
              Receive message from specified band.
       MSG_HIPRI
              Send/receive high-priority message.
       MORECTL
              More control information is left in message.
       MOREDATA
              More data is left in message.

       The  <stropts.h>  header  may  make  visible  all  of  the symbols from
       <unistd.h>.
       The following shall be declared as functions and may also be defined as
       macros. Function prototypes shall be provided.

              int    isastream(int);
              int    getmsg(int, struct strbuf *restrict, struct strbuf *restrict,
                         int *restrict);
              int    getpmsg(int, struct strbuf *restrict, struct strbuf *restrict,
                         int *restrict, int *restrict);
              int    ioctl(int, int, ... );
              int    putmsg(int, const struct strbuf *, const struct strbuf *, int);
              int    putpmsg(int, const struct strbuf *, const struct strbuf *, int,
                         int);
              int    fattach(int, const char *);
              int    fdetach(const char *);
       The following sections are informative.
APPLICATION USAGE
       None.
RATIONALE
       None.
FUTURE DIRECTIONS
       None.
SEE ALSO
       <sys/types.h>,    <unistd.h>,   the   System   Interfaces   volume   of
       IEEE Std 1003.1-2001,  close(),  fcntl(),  getmsg(),  ioctl(),  open(),
       pipe(), read(), poll(), putmsg(), signal(), write()
COPYRIGHT
       Portions  of  this text are reprinted and reproduced in electronic form
       from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
       --  Portable  Operating  System  Interface (POSIX), The Open Group Base
       Specifications Issue 6, Copyright (C) 2001-2003  by  the  Institute  of
       Electrical  and  Electronics  Engineers, Inc and The Open Group. In the
       event of any discrepancy between this version and the original IEEE and
       The  Open Group Standard, the original IEEE and The Open Group Standard
       is the referee document. The original Standard can be  obtained  online
       at http://www.opengroup.org/unix/online.html .

IEEE/The Open Group                  2003                      <stropts.h>(0P)