rrdgraph_rpn(images) - phpMan

RRDGRAPH_RPN(1)                     rrdtool                    RRDGRAPH_RPN(1)

NAME
       rrdgraph_rpn - About RPN Math in rrdtool graph
SYNOPSIS
       RPN expression:=vname|operator|value[,RPN expression]
DESCRIPTION
       If you have ever used a traditional HP calculator you already know RPN
       (Reverse Polish Notation).  The idea behind RPN is that you have a
       stack and push your data onto this stack. Whenever you execute an
       operation, it takes as many elements from the stack as needed. Pushing
       is done implicitly, so whenever you specify a number or a variable, it
       gets pushed onto the stack automatically.
       At the end of the calculation there should be one and only one value
       left on the stack.  This is the outcome of the function and this is
       what is put into the vname.  For CDEF instructions, the stack is
       processed for each data point on the graph. VDEF instructions work on
       an entire data set in one run. Note, that currently VDEF instructions
       only support a limited list of functions.
       Example: "VDEF:maximum=mydata,MAXIMUM"
       This will set variable "maximum" which you now can use in the rest of
       your RRD script.
       Example: "CDEF:mydatabits=mydata,8,*"
       This means:  push variable mydata, push the number 8, execute the
       operator *. The operator needs two elements and uses those to return
       one value.  This value is then stored in mydatabits.  As you may have
       guessed, this instruction means nothing more than mydatabits = mydata *
       8.  The real power of RPN lies in the fact that it is always clear in
       which order to process the input.  For expressions like "a = b + 3 * 5"
       you need to multiply 3 with 5 first before you add b to get a. However,
       with parentheses you could change this order: "a = (b + 3) * 5". In
       RPN, you would do "a = b, 3, +, 5, *" without the need for parentheses.
OPERATORS
       Boolean operators
           LT, LE, GT, GE, EQ, NE
           Pop two elements from the stack, compare them for the selected
           condition and return 1 for true or 0 for false. Comparing an
           unknown or an infinite value will result in unknown returned ...
           which will also be treated as false by the IF call.
           UN, ISINF
           Pop one element from the stack, compare this to unknown
           respectively to positive or negative infinity. Returns 1 for true
           or 0 for false.
           IF
           Pops three elements from the stack.  If the element popped last is
           0 (false), the value popped first is pushed back onto the stack,
           otherwise the value popped second is pushed back. This does,
           indeed, mean that any value other than 0 is considered to be true.
           Example: "A,B,C,IF" should be read as "if (A) then (B) else (C)"

       Comparing values
           MIN, MAX
           Pops two elements from the stack and returns the smaller or larger,
           respectively.  Note that infinite is larger than anything else.  If
           one of the input numbers is unknown then the result of the
           operation will be unknown too.
           LIMIT
           Pops two elements from the stack and uses them to define a range.
           Then it pops another element and if it falls inside the range, it
           is pushed back. If not, an unknown is pushed.
           The range defined includes the two boundaries (so: a number equal
           to one of the boundaries will be pushed back). If any of the three
           numbers involved is either unknown or infinite this function will
           always return an unknown
           Example: "CDEF:a=alpha,0,100,LIMIT" will return unknown if alpha is
           lower than 0 or if it is higher than 100.

       Arithmetics
           +, -, *, /, %
           Add, subtract, multiply, divide, modulo
           ADDNAN
           NAN-safe addition. If one parameter is NAN/UNKNOWN it'll be treated
           as zero. If both parameters are NAN/UNKNOWN, NAN/UNKNOWN will be
           returned.
           SIN, COS, LOG, EXP, SQRT
           Sine and cosine (input in radians), log and exp (natural
           logarithm), square root.
           ATAN
           Arctangent (output in radians).
           ATAN2
           Arctangent of y,x components (output in radians).  This pops one
           element from the stack, the x (cosine) component, and then a
           second, which is the y (sine) component.  It then pushes the
           arctangent of their ratio, resolving the ambiguity between
           quadrants.
           Example: "CDEF:angle=Y,X,ATAN2,RAD2DEG" will convert "X,Y"
           components into an angle in degrees.
           FLOOR, CEIL
           Round down or up to the nearest integer.
           DEG2RAD, RAD2DEG
           Convert angle in degrees to radians, or radians to degrees.
           ABS
           Take the absolute value.
       Set Operations
           SORT, REV
           Pop one element from the stack.  This is the count of items to be
           sorted (or reversed).  The top count of the remaining elements are
           then sorted (or reversed) in place on the stack.
           Example: "CDEF:x=v1,v2,v3,v4,v5,v6,6,SORT,POP,5,REV,POP,+,+,+,4,/"
           will compute the average of the values v1 to v6 after removing the
           smallest and largest.
           AVG
           Pop one element (count) from the stack. Now pop count elements and
           build the average, ignoring all UNKNOWN values in the process.
           Example: "CDEF:x=a,b,c,d,4,AVG"
           TREND, TRENDNAN
           Create a "sliding window" average of another data series.
           Usage: CDEF:smoothed=x,1800,TREND
           This will create a half-hour (1800 second) sliding window average
           of x.  The average is essentially computed as shown here:
                            +---!---!---!---!---!---!---!---!--->
                                                                now
                                  delay     t0
                            <--------------->
                                    delay       t1
                                <--------------->
                                         delay      t2
                                    <--------------->

                Value at sample (t0) will be the average between (t0-delay) and (t0)
                Value at sample (t1) will be the average between (t1-delay) and (t1)
                Value at sample (t2) will be the average between (t2-delay) and (t2)
           TRENDNAN is - in contrast to TREND - NAN-safe. If you use TREND and
           one source value is NAN the complete sliding window is affected.
           The TRENDNAN operation ignores all NAN-values in a sliding window
           and computes the average of the remaining values.
           PREDICT, PREDICTSIGMA
           Create a "sliding window" average/sigma of another data series,
           that also shifts the data series by given amounts of of time as
           well
           Usage - explicit stating shifts: CDEF:predict=<shift n>,...,<shift
           1>,n,<window>,x,PREDICT CDEF:sigma=<shift n>,...,<shift
           1>,n,<window>,x,PREDICTSIGMA
           Usage - shifts defined as a base shift and a number of time this is
           applied CDEF:predict=<shift multiplier>,-n,<window>,x,PREDICT
           CDEF:sigma=<shift multiplier>,-n,<window>,x,PREDICTSIGMA
           Example: CDEF:predict=172800,86400,2,1800,x,PREDICT
           This will create a half-hour (1800 second) sliding window
           average/sigma of x, that average is essentially computed as shown
           here:
            +---!---!---!---!---!---!---!---!---!---!---!---!---!---!---!---!---!--->
                                                                                now
                                                             shift 1        t0
                                                    <----------------------->
                                          window
                                    <--------------->
                                                  shift 2
                            <----------------------------------------------->
                  window
            <--------------->
                                                                 shift 1        t1
                                                        <----------------------->
                                              window
                                        <--------------->
                                                       shift 2
                                <----------------------------------------------->
                      window
                <--------------->
            Value at sample (t0) will be the average between (t0-shift1-window) and (t0-shift1)
                                                 and between (t0-shift2-window) and (t0-shift2)
            Value at sample (t1) will be the average between (t1-shift1-window) and (t1-shift1)
                                                 and between (t1-shift2-window) and (t1-shift2)
           The function is by design NAN-safe.  This also allows for
           extrapolation into the future (say a few days) - you may need to
           define the data series whit the optional start= parameter, so that
           the source data series has enough data to provide prediction also
           at the beginning of a graph...
           Here an example, that will create a 10 day graph that also shows
           the prediction 3 days into the future with its uncertainty value
           (as defined by avg+-4*sigma) This also shows if the prediction is
           exceeded at a certain point.
           rrdtool graph image.png --imgformat=PNG \
            --start=-7days --end=+3days --width=1000 --height=200
           --alt-autoscale-max \
            DEF:value=value.rrd:value:AVERAGE:start=-14days \
            LINE1:value#ff0000:value \
            CDEF:predict=86400,-7,1800,value,PREDICT \
            CDEF:sigma=86400,-7,1800,value,PREDICTSIGMA \
            CDEF:upper=predict,sigma,3,*,+ \
            CDEF:lower=predict,sigma,3,*,- \
            LINE1:predict#00ff00:prediction \
            LINE1:upper#0000ff:upper\ certainty\ limit \
            LINE1:lower#0000ff:lower\ certainty\ limit \
            CDEF:exceeds=value,UN,0,value,lower,upper,LIMIT,UN,IF \
            TICK:exceeds#aa000080:1
           Note: Experience has shown that a factor between 3 and 5 to scale
           sigma is a good discriminator to detect abnormal behavior. This
           obviously depends also on the type of data and how "noisy" the data
           series is.
           This prediction can only be used for short term extrapolations -
           say a few days into the future-
       Special values
           UNKN
           Pushes an unknown value on the stack
           INF, NEGINF
           Pushes a positive or negative infinite value on the stack. When
           such a value is graphed, it appears at the top or bottom of the
           graph, no matter what the actual value on the y-axis is.
           PREV
           Pushes an unknown value if this is the first value of a data set or
           otherwise the result of this CDEF at the previous time step. This
           allows you to do calculations across the data.  This function
           cannot be used in VDEF instructions.
           PREV(vname)
           Pushes an unknown value if this is the first value of a data set or
           otherwise the result of the vname variable at the previous time
           step. This allows you to do calculations across the data. This
           function cannot be used in VDEF instructions.
           COUNT
           Pushes the number 1 if this is the first value of the data set, the
           number 2 if it is the second, and so on. This special value allows
           you to make calculations based on the position of the value within
           the data set. This function cannot be used in VDEF instructions.
       Time
           Time inside RRDtool is measured in seconds since the epoch. The
           epoch is defined to be "Thu Jan  1 00:00:00 UTC 1970".
           NOW
           Pushes the current time on the stack.
           TIME
           Pushes the time the currently processed value was taken at onto the
           stack.
           LTIME
           Takes the time as defined by TIME, applies the time zone offset
           valid at that time including daylight saving time if your OS
           supports it, and pushes the result on the stack.  There is an
           elaborate example in the examples section below on how to use this.
       Processing the stack directly
           DUP, POP, EXC
           Duplicate the top element, remove the top element, exchange the two
           top elements.

VARIABLES
       These operators work only on VDEF statements. Note that currently ONLY
       these work for VDEF.
       MAXIMUM, MINIMUM, AVERAGE
           Return the corresponding value, MAXIMUM and MINIMUM also return the
           first occurrence of that value in the time component.
           Example: "VDEF:avg=mydata,AVERAGE"
       STDEV
           Returns the standard deviation of the values.
           Example: "VDEF:stdev=mydata,STDEV"
       LAST, FIRST
           Return the last/first non-nan or infinite value for the selected
           data stream, including its timestamp.
           Example: "VDEF:first=mydata,FIRST"
       TOTAL
           Returns the rate from each defined time slot multiplied with the
           step size.  This can, for instance, return total bytes transferred
           when you have logged bytes per second. The time component returns
           the number of seconds.
           Example: "VDEF:total=mydata,TOTAL"
       PERCENT, PERCENTNAN
           This should follow a DEF or CDEF vname. The vname is popped,
           another number is popped which is a certain percentage (0..100).
           The data set is then sorted and the value returned is chosen such
           that percentage percent of the values is lower or equal than the
           result.  For PERCENTNAN Unknown values are ignored, but for PERCENT
           Unknown values are considered lower than any finite number for this
           purpose so if this operator returns an unknown you have quite a lot
           of them in your data.  Infinite numbers are lesser, or more, than
           the finite numbers and are always more than the Unknown numbers.
           (NaN < -INF < finite values < INF)
           Example: "VDEF:perc95=mydata,95,PERCENT"
                    "VDEF:percnan95=mydata,95,PERCENTNAN"
       LSLSLOPE, LSLINT, LSLCORREL
           Return the parameters for a Least Squares Line (y = mx +b) which
           approximate the provided dataset.  LSLSLOPE is the slope (m) of the
           line related to the COUNT position of the data.  LSLINT is the
           y-intercept (b), which happens also to be the first data point on
           the graph. LSLCORREL is the Correlation Coefficient (also know as
           Pearson's Product Moment Correlation Coefficient).  It will range
           from 0 to +/-1 and represents the quality of fit for the
           approximation.
           Example: "VDEF:slope=mydata,LSLSLOPE"
SEE ALSO
       rrdgraph gives an overview of how rrdtool graph works.  rrdgraph_data
       describes DEF,CDEF and VDEF in detail.  rrdgraph_rpn describes the RPN
       language used in the ?DEF statements.  rrdgraph_graph page describes
       all of the graph and print functions.
       Make sure to read rrdgraph_examples for tips&tricks.
AUTHOR
       Program by Tobias Oetiker <tobi AT oetiker.ch>
       This manual page by Alex van den Bogaerdt <alex AT vandenbogaerdt.nl> with
       corrections and/or additions by several people

1.4.8                             2013-05-23                   RRDGRAPH_RPN(1)