pthread_key_create(images) - phpMan

PTHREAD_KEY_CREATE(3P)     POSIX Programmer's Manual    PTHREAD_KEY_CREATE(3P)

PROLOG
       This  manual  page is part of the POSIX Programmer's Manual.  The Linux
       implementation of this interface may differ (consult the  corresponding
       Linux  manual page for details of Linux behavior), or the interface may
       not be implemented on Linux.
NAME
       pthread_key_create - thread-specific data key creation
SYNOPSIS
       #include <pthread.h>
       int pthread_key_create(pthread_key_t *key, void (*destructor)(void*));

DESCRIPTION
       The pthread_key_create() function shall create a  thread-specific  data
       key  visible  to  all  threads  in  the process. Key values provided by
       pthread_key_create() are opaque objects used to locate  thread-specific
       data. Although the same key value may be used by different threads, the
       values bound to the key by pthread_setspecific() are  maintained  on  a
       per-thread basis and persist for the life of the calling thread.
       Upon  key creation, the value NULL shall be associated with the new key
       in all active threads. Upon thread creation, the value  NULL  shall  be
       associated with all defined keys in the new thread.
       An  optional destructor function may be associated with each key value.
       At thread exit, if a key value has a non-NULL destructor  pointer,  and
       the  thread has a non-NULL value associated with that key, the value of
       the key is set to NULL, and then the function pointed to is called with
       the  previously  associated  value  as  its sole argument. The order of
       destructor calls is unspecified if more than one destructor exists  for
       a thread when it exits.
       If,  after all the destructors have been called for all non-NULL values
       with associated destructors, there are still some non-NULL values  with
       associated  destructors,  then  the  process is repeated.  If, after at
       least {PTHREAD_DESTRUCTOR_ITERATIONS} iterations  of  destructor  calls
       for  outstanding  non-NULL values, there are still some non-NULL values
       with associated destructors, implementations may stop calling  destruc-
       tors, or they may continue calling destructors until no non-NULL values
       with associated destructors exist, even though this might result in  an
       infinite loop.
RETURN VALUE
       If  successful, the pthread_key_create() function shall store the newly
       created key value at *key and shall return zero.  Otherwise,  an  error
       number shall be returned to indicate the error.
ERRORS
       The pthread_key_create() function shall fail if:
       EAGAIN The  system  lacked  the  necessary  resources to create another
              thread-specific data key, or the  system-imposed  limit  on  the
              total  number  of  keys  per process {PTHREAD_KEYS_MAX} has been
              exceeded.
       ENOMEM Insufficient memory exists to create the key.

       The pthread_key_create() function shall not return  an  error  code  of
       [EINTR].
       The following sections are informative.
EXAMPLES
       The  following  example  demonstrates  a  function  that  initializes a
       thread-specific data key when it is  first  called,  and  associates  a
       thread-specific  object  with  each  calling  thread, initializing this
       object when necessary.

              static pthread_key_t key;
              static pthread_once_t key_once = PTHREAD_ONCE_INIT;

              static void
              make_key()
              {
                  (void) pthread_key_create(&key, NULL);
              }

              func()
              {
                  void *ptr;

                  (void) pthread_once(&key_once, make_key);
                  if ((ptr = pthread_getspecific(key)) == NULL) {
                      ptr = malloc(OBJECT_SIZE);
                      ...
                      (void) pthread_setspecific(key, ptr);
                  }
                  ...
              }
       Note that the key has to be initialized before pthread_getspecific() or
       pthread_setspecific()  can be used. The pthread_key_create() call could
       either be explicitly made in a module initialization routine, or it can
       be  done  implicitly  by the first call to a module as in this example.
       Any attempt to use the key before it is initialized  is  a  programming
       error, making the code below incorrect.

              static pthread_key_t key;

              func()
              {
                  void *ptr;

                 /* KEY NOT INITIALIZED!!!  THIS WON'T WORK!!! */
                  if ((ptr = pthread_getspecific(key)) == NULL &&
                      pthread_setspecific(key, NULL) != 0) {
                      pthread_key_create(&key, NULL);
                      ...
                  }
              }
APPLICATION USAGE
       None.
RATIONALE
   Destructor Functions
       Normally,  the value bound to a key on behalf of a particular thread is
       a pointer to storage allocated dynamically on  behalf  of  the  calling
       thread.  The  destructor  functions specified with pthread_key_create()
       are intended to be used to free this storage  when  the  thread  exits.
       Thread  cancellation  cleanup  handlers cannot be used for this purpose
       because thread-specific data may persist outside the lexical  scope  in
       which the cancellation cleanup handlers operate.
       If the value associated with a key needs to be updated during the life-
       time of the thread, it may be necessary to release the storage  associ-
       ated  with  the  old value before the new value is bound.  Although the
       pthread_setspecific() function could do this automatically,  this  fea-
       ture  is  not  needed  often  enough  to  justify the added complexity.
       Instead, the programmer is responsible for freeing the stale storage:

              pthread_getspecific(key, &old);
              new = allocate();
              destructor(old);
              pthread_setspecific(key, new);
       Note:  The above example could leak storage if  run  with  asynchronous
              cancellation enabled. No such problems occur in the default can-
              cellation state if no cancellation points occur between the  get
              and set.

       There  is  no  notion  of a destructor-safe function. If an application
       does not call pthread_exit() from a signal handler, or if it blocks any
       signal whose handler may call pthread_exit() while calling async-unsafe
       functions, all functions may be safely called from destructors.
   Non-Idempotent Data Key Creation
       There  were  requests  to  make  pthread_key_create()  idempotent  with
       respect to a given key address parameter. This would allow applications
       to call pthread_key_create() multiple times for a given key address and
       be  guaranteed  that  only  one  key  would  be created. Doing so would
       require the key value to be previously initialized (possibly at compile
       time)  to  a  known  null value and would require that implicit mutual-
       exclusion be performed based on the address and  contents  of  the  key
       parameter in order to guarantee that exactly one key would be created.
       Unfortunately,  the  implicit  mutual-exclusion would not be limited to
       only pthread_key_create(). On many  implementations,  implicit  mutual-
       exclusion  would also have to be performed by pthread_getspecific() and
       pthread_setspecific() in order  to  guard  against  using  incompletely
       stored or not-yet-visible key values. This could significantly increase
       the cost of important operations, particularly pthread_getspecific().
       Thus, this proposal was  rejected.  The  pthread_key_create()  function
       performs  no  implicit synchronization. It is the responsibility of the
       programmer to ensure that it is called exactly once per key before  use
       of  the  key. Several straightforward mechanisms can already be used to
       accomplish this, including calling explicit module initialization func-
       tions, using mutexes, and using pthread_once(). This places no signifi-
       cant burden on the programmer, introduces no possibly confusing ad  hoc
       implicit  synchronization  mechanism,  and  potentially allows commonly
       used thread-specific data operations to be more efficient.
FUTURE DIRECTIONS
       None.
SEE ALSO
       pthread_getspecific(), pthread_key_delete(), the Base Definitions  vol-
       ume of IEEE Std 1003.1-2001, <pthread.h>
COPYRIGHT
       Portions  of  this text are reprinted and reproduced in electronic form
       from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
       --  Portable  Operating  System  Interface (POSIX), The Open Group Base
       Specifications Issue 6, Copyright (C) 2001-2003  by  the  Institute  of
       Electrical  and  Electronics  Engineers, Inc and The Open Group. In the
       event of any discrepancy between this version and the original IEEE and
       The  Open Group Standard, the original IEEE and The Open Group Standard
       is the referee document. The original Standard can be  obtained  online
       at http://www.opengroup.org/unix/online.html .

IEEE/The Open Group                  2003               PTHREAD_KEY_CREATE(3P)