pkla-check-authorization(feed) - phpMan

PKLA-CHECK-AUTHORI(8)      pkla-check-authorization      PKLA-CHECK-AUTHORI(8)

NAME
       pkla-check-authorization - Evaluate pklocalauthority authorization
       configuration
SYNOPSIS
       pkla-check-authorization [--help]
       pkla-check-authorization [--paths paths] {user-name} {is-local}
                                {is-active} {action}
DESCRIPTION
       pkla-check-authorization interprets non-JavaScript configuration files
       described below to determine the response of polkit(8) to authorization
       queries.
       Note: Authorization decision evaluation is driven by JavaScript rules
       as described in polkit(8).  pkla-check-authorization is called by a
       JavaScript rule file named 49-polkit-pkla-compat.rules; other
       JavaScript rules with a higher priority may exist, so the
       pkla-check-authorization configuration may not necessarily govern the
       final polkit(8) authorization decision.
       The ordering of the JavaScript rule files and the ordering of
       pkla-check-authorization configuration files is not integrated and uses
       different rules; the pkla-check-authorization configuration evaluation
       is happens at a single point within the JavaScript rule evaluation
       order.
       pkla-check-authorization is an internal helper program of
       pkla-polkit-compat. You shouldn't need to run it directly, except for
       debugging purposes.
       The arguments to pkla-check-authorization are, in order:
       user-name
           Name of the user account asking for authorization
       is-local
           Whether the attempted action is performed from a local login
           session, true or false.
       is-active
           Whether the attempted action is performed from a currently active
           session (e.g. currently active virtual console), true or false.
       action
           A string identifying the polkit(8) action.
       If the configuration specifies an authorization decision,
       pkla-check-authorization outputs the decision and a terminating
       newline. If no decision is configured, the output is empty.
OPTIONS
       -h, --help
           Write a summary of the available options to standard output and
           exit successfully.
       -p, --paths=paths
           Search for configuration files in semicolon-separated paths instead
           of the default
           /var/lib/polkit-1/localauthority;/etc/polkit-1/localauthority.
EXIT STATUS
       pkla-check-authorization exits with 0 on success (even if there is no
       decision configured), and a non-zero status on error.
DIRECTORY STRUCTURE
       Files with .pkla extension are read from all directories located inside
       the /etc/polkit-1/localauthority and /var/lib/polkit-1/localauthority
       directories (or as specified using the --paths option). By default, the
       following sub-directories are installed.
           /etc/polkit-1/
           `-- localauthority
               |-- 10-vendor.d
               |-- 20-org.d
               |-- 30-site.d
               |-- 50-local.d
               `-- 90-mandatory.d

       and
           /var/lib/polkit-1/
           `-- localauthority
               |-- 10-vendor.d
               |-- 20-org.d
               |-- 30-site.d
               |-- 50-local.d
               `-- 90-mandatory.d

       The /etc/polkit-1/localauthority hierarchy is intended for local
       configuration and the /var/lib/polkit-1/localauthority is intended for
       3rd party packages.
       Each .pkla file contains one or more authorization entries. If the
       underlying filesystem supports file monitoring, the Local Authority
       will reload information whenever .pkla files are added, removed or
       changed.
       Each directory is intended for a specific audience
       10-vendor.d
           Intended for use by the OS vendor.
       20-org.d
           Intended for the organization deploying the OS.
       30-site.d
           Intended for the site deploying the system.
       50-local.d
           Intended for local usage.
       90-mandatory.d
           Intended for the organization deploying the OS.
       and new directories can be added/removed as needed.
       As to regards to the content, each .pkla file is a standard key file
       and contains key/value pairs in one or more groups with each group
       representing an authorization entry. A .pkla file MUST be named by
       using a scheme to ensure that the name is unique, e.g. reverse DNS
       notation or similar. For example, if the organization is "Acme Corp"
       needs to modify policy for the product "Frobnicator", a name like
       com.acme.frobnicator.pkla would be suitable.
AUTHORIZATION ENTRY
       Each group in a .pkla file must have a name that is unique within the
       file it belongs to. The following keys are recognized:
       Identity
           A semi-colon separated list of entries to match identities. Each
           entry should start with unix-user: or unix-group: to specify
           whether to match on a UNIX user name or a UNIX group name, and
           continue with a glob matching the group or user name. Netgroups are
           supported with the unix-netgroup: prefix, but cannot support glob
           syntax. Finally, an entry "default" (with no prefix) can be used to
           specify the default match.
       Action
           A semi-colon separated list of globs to match action identifiers.
       ResultActive
           The result to return for subjects in an active local session that
           matches one or more of the given identities. Allowed values are
           similar to what can be used in the defaults section of .policy
           files used to define actions, e.g.  yes, no, auth_self,
           auth_self_keep, auth_admin and auth_admin_keep.
       ResultInactive
           Like ResultActive but instead applies to subjects in inactive local
           sessions.
       ResultAny
           Like ResultActive but instead applies to any subject.
       All keys specified above are required except that only at least one of
       ResultAny, ResultInactive and ResultActive must be present.
EVALUATION ORDER
       The authorization entries discussed above are consulted using the
       following algorithm.
       The authorization entries from all .pkla files are ordered using the
       following rules. First all the basename of all sub-directories (e.g.
       30-site.d) from both the /etc/polkit-1/localauthority and
       /var/lib/polkit-1/localauthority directories are enumerated and sorted
       (using the C locale). If a name exists in both /etc and /var, the one
       in /etc takes precedence. Then all .pkla files are read in order from
       this list of sub-directories. For each .pkla file, authorizations from
       each file are appended in order resulting in an ordered list of
       authorization entries.
       For example, given the following files
           /var/lib/polkit-1
            localauthority
                10-vendor.d
               |    10-desktop-policy.pkla
                20-org.d
                30-site.d
                50-local.d
                55-org.my.company.d
               |    10-org.my.company.product.pkla
                90-mandatory.d
           /etc/polkit-1
            localauthority
                10-vendor.d
               |    01-some-changes-from-a-subvendor.pkla
                20-org.d
                30-site.d
                50-local.d
                55-org.my.company.d
               |    10-org.my.company.product.pkla
                90-mandatory.d

       the evaluation order of the .pkla files is:
        1. 10-desktop-policy.pkla
        2. 01-some-changes-from-a-subvendor.pkla
        3. 10-org.my.company.product.pkla (the /var one)
        4. 10-org.my.company.product.pkla (the /etc one)
       When the list of authorization entries has been calculated, the
       authorization check can be made. First, the user of the Subject is
       determined and the groups that the user belongs are looked up.
       Then, authorization entries that include the "default" field value in
       the Identity field are consulted in order. If the authorization entry
       matches the data from the authorization check, then the authorization
       result from RequireAny, RequireInactive or RequireActive is used.
       Next, for each group identity, all authorization entries that contain a
       matching group entry are again consulted in the same manner.
       Finally, the authorization entries are consulted using the user
       identity in the same manner.
       Note that processing continues even after a match. This allows for so
       called "negative authorizations", see the section called "EXAMPLE" for
       further discussion.
EXAMPLE
       The following .pkla file grants authorization to all users in the staff
       group for actions matching the glob com.example.awesomeproduct.*
       provided they are in an active session on the local console:
           [Normal Staff Permissions]
           Identity=unix-group:staff
           Action=com.example.awesomeproduct.*
           ResultAny=no
           ResultInactive=no
           ResultActive=yes

       If the users homer and grimes are member of the staff group but policy
       requires that an administrator needs to authenticate every time
       authorization for any action matching com.example.awesomeproduct.*  is
       required, one would add
           [Exclude Some Problematic Users]
           Identity=unix-user:homer;unix-user:grimes
           Action=com.example.awesomeproduct.*
           ResultAny=no
           ResultInactive=no
           ResultActive=auth_admin

       and make sure this authorization entry is after the first one.
       The following entry modifies the default authorization decision (it is
       overridden by any entry that matches using unix-user: or unix-group:,
       but overrides any defaults set by the application author in an .action
       file):
           [Disable Access by Default]
           Identity=default
           Action=com.example.awesomeproduct.*
           ResultAny=no
           ResultInactive=no
           ResultActive=no

FILES
       /etc/polkit-1/localauthority, /var/lib/polkit-1/localauthority
           Default directories containing decision configuration files.
AUTHOR
       Written by David Zeuthen <davidz AT redhat.com> with a lot of help from
       many others. Adapted by Miloslav Trma <mitr AT redhat.com>.
SEE ALSO
       polkit(8)

polkit-pkla-compat                 May 2013              PKLA-CHECK-AUTHORI(8)