perlgit(category19-buecher.html) - phpMan

PERLGIT(1)             Perl Programmers Reference Guide             PERLGIT(1)

NAME
       perlgit - Detailed information about git and the Perl repository
DESCRIPTION
       This document provides details on using git to develop Perl. If you are
       just interested in working on a quick patch, see perlhack first.  This
       document is intended for people who are regular contributors to Perl,
       including those with write access to the git repository.
CLONING THE REPOSITORY
       All of Perl's source code is kept centrally in a Git repository at
       perl5.git.perl.org.
       You can make a read-only clone of the repository by running:
         % git clone git://perl5.git.perl.org/perl.git perl
       This uses the git protocol (port 9418).
       If you cannot use the git protocol for firewall reasons, you can also
       clone via http, though this is much slower:
         % git clone http://perl5.git.perl.org/perl.git perl
WORKING WITH THE REPOSITORY
       Once you have changed into the repository directory, you can inspect
       it. After a clone the repository will contain a single local branch,
       which will be the current branch as well, as indicated by the asterisk.
         % git branch
         * blead
       Using the -a switch to "branch" will also show the remote tracking
       branches in the repository:
         % git branch -a
         * blead
           origin/HEAD
           origin/blead
         ...
       The branches that begin with "origin" correspond to the "git remote"
       that you cloned from (which is named "origin"). Each branch on the
       remote will be exactly tracked by these branches. You should NEVER do
       work on these remote tracking branches. You only ever do work in a
       local branch. Local branches can be configured to automerge (on pull)
       from a designated remote tracking branch. This is the case with the
       default branch "blead" which will be configured to merge from the
       remote tracking branch "origin/blead".
       You can see recent commits:
         % git log
       And pull new changes from the repository, and update your local
       repository (must be clean first)
         % git pull
       Assuming we are on the branch "blead" immediately after a pull, this
       command would be more or less equivalent to:
         % git fetch
         % git merge origin/blead
       In fact if you want to update your local repository without touching
       your working directory you do:
         % git fetch
       And if you want to update your remote-tracking branches for all defined
       remotes simultaneously you can do
         % git remote update
       Neither of these last two commands will update your working directory,
       however both will update the remote-tracking branches in your
       repository.
       To make a local branch of a remote branch:
         % git checkout -b maint-5.10 origin/maint-5.10
       To switch back to blead:
         % git checkout blead
   Finding out your status
       The most common git command you will use will probably be
         % git status
       This command will produce as output a description of the current state
       of the repository, including modified files and unignored untracked
       files, and in addition it will show things like what files have been
       staged for the next commit, and usually some useful information about
       how to change things. For instance the following:
         $ git status
         # On branch blead
         # Your branch is ahead of 'origin/blead' by 1 commit.
         #
         # Changes to be committed:
         #   (use "git reset HEAD <file>..." to unstage)
         #
         #       modified:   pod/perlgit.pod
         #
         # Changed but not updated:
         #   (use "git add <file>..." to update what will be committed)
         #
         #       modified:   pod/perlgit.pod
         #
         # Untracked files:
         #   (use "git add <file>..." to include in what will be committed)
         #
         #       deliberate.untracked
       This shows that there were changes to this document staged for commit,
       and that there were further changes in the working directory not yet
       staged. It also shows that there was an untracked file in the working
       directory, and as you can see shows how to change all of this. It also
       shows that there is one commit on the working branch "blead" which has
       not been pushed to the "origin" remote yet. NOTE: that this output is
       also what you see as a template if you do not provide a message to "git
       commit".
   Patch workflow
       First, please read perlhack for details on hacking the Perl core.  That
       document covers many details on how to create a good patch.
       If you already have a Perl repository, you should ensure that you're on
       the blead branch, and your repository is up to date:
         % git checkout blead
         % git pull
       It's preferable to patch against the latest blead version, since this
       is where new development occurs for all changes other than critical bug
       fixes. Critical bug fix patches should be made against the relevant
       maint branches, or should be submitted with a note indicating all the
       branches where the fix should be applied.
       Now that we have everything up to date, we need to create a temporary
       new branch for these changes and switch into it:
         % git checkout -b orange
       which is the short form of
         % git branch orange
         % git checkout orange
       Creating a topic branch makes it easier for the maintainers to rebase
       or merge back into the master blead for a more linear history. If you
       don't work on a topic branch the maintainer has to manually cherry pick
       your changes onto blead before they can be applied.
       That'll get you scolded on perl5-porters, so don't do that. Be Awesome.
       Then make your changes. For example, if Leon Brocard changes his name
       to Orange Brocard, we should change his name in the AUTHORS file:
         % perl -pi -e 's{Leon Brocard}{Orange Brocard}' AUTHORS
       You can see what files are changed:
         % git status
         # On branch orange
         # Changes to be committed:
         #   (use "git reset HEAD <file>..." to unstage)
         #
         #    modified:   AUTHORS
         #
       And you can see the changes:
         % git diff
         diff --git a/AUTHORS b/AUTHORS
         index 293dd70..722c93e 100644
         --- a/AUTHORS
         +++ b/AUTHORS
         @@ -541,7 +541,7 @@    Lars Hecking                   <lhecking AT nmrc.ie>
          Laszlo Molnar                  <laszlo.molnar AT eth.se>
          Leif Huhn                      <leif AT hale.com>
          Len Johnson                    <lenjay AT ibm.net>
         -Leon Brocard                   <acme AT astray.com>
         +Orange Brocard                 <acme AT astray.com>
          Les Peters                     <lpeters AT aol.net>
          Lesley Binks                   <lesley.binks AT gmail.com>
          Lincoln D. Stein               <lstein AT cshl.org>
       Now commit your change locally:
         % git commit -a -m 'Rename Leon Brocard to Orange Brocard'
         Created commit 6196c1d: Rename Leon Brocard to Orange Brocard
          1 files changed, 1 insertions(+), 1 deletions(-)
       The "-a" option is used to include all files that git tracks that you
       have changed. If at this time, you only want to commit some of the
       files you have worked on, you can omit the "-a" and use the command
       "git add FILE ..." before doing the commit. "git add --interactive"
       allows you to even just commit portions of files instead of all the
       changes in them.
       The "-m" option is used to specify the commit message. If you omit it,
       git will open a text editor for you to compose the message
       interactively. This is useful when the changes are more complex than
       the sample given here, and, depending on the editor, to know that the
       first line of the commit message doesn't exceed the 50 character legal
       maximum.
       Once you've finished writing your commit message and exited your
       editor, git will write your change to disk and tell you something like
       this:
         Created commit daf8e63: explain git status and stuff about remotes
          1 files changed, 83 insertions(+), 3 deletions(-)
       If you re-run "git status", you should see something like this:
         % git status
         # On branch blead
         # Your branch is ahead of 'origin/blead' by 2 commits.
         #
         # Untracked files:
         #   (use "git add <file>..." to include in what will be committed)
         #
         #       deliberate.untracked
         nothing added to commit but untracked files present (use "git add" to track)
       When in doubt, before you do anything else, check your status and read
       it carefully, many questions are answered directly by the git status
       output.
       You can examine your last commit with:
         % git show HEAD
       and if you are not happy with either the description or the patch
       itself you can fix it up by editing the files once more and then issue:
         % git commit -a --amend
       Now you should create a patch file for all your local changes:
         % git format-patch -M origin..
         0001-Rename-Leon-Brocard-to-Orange-Brocard.patch
       You should now send an email to perlbug AT perl.org
       <mailto:perlbug AT perl.org> with a description of your changes, and
       include this patch file as an attachment. In addition to being tracked
       by RT, mail to perlbug will automatically be forwarded to perl5-porters
       (with manual moderation, so please be patient). You should only send
       patches to perl5-porters AT perl.org <mailto:perl5-porters AT perl.org>
       directly if the patch is not ready to be applied, but intended for
       discussion.
       See the next section for how to configure and use git to send these
       emails for you.
       If you want to delete your temporary branch, you may do so with:
         % git checkout blead
         % git branch -d orange
         error: The branch 'orange' is not an ancestor of your current HEAD.
         If you are sure you want to delete it, run 'git branch -D orange'.
         % git branch -D orange
         Deleted branch orange.
   Committing your changes
       Assuming that you'd like to commit all the changes you've made as a
       single atomic unit, run this command:
          % git commit -a
       (That "-a" tells git to add every file you've changed to this commit.
       New files aren't automatically added to your commit when you use
       "commit -a" If you want to add files or to commit some, but not all of
       your changes, have a look at the documentation for "git add".)
       Git will start up your favorite text editor, so that you can craft a
       commit message for your change. See "Commit message" in perlhack for
       more information about what makes a good commit message.
       Once you've finished writing your commit message and exited your
       editor, git will write your change to disk and tell you something like
       this:
         Created commit daf8e63: explain git status and stuff about remotes
          1 files changed, 83 insertions(+), 3 deletions(-)
       If you re-run "git status", you should see something like this:
         % git status
         # On branch blead
         # Your branch is ahead of 'origin/blead' by 2 commits.
         #
         # Untracked files:
         #   (use "git add <file>..." to include in what will be committed)
         #
         #       deliberate.untracked
         nothing added to commit but untracked files present (use "git add" to track)
       When in doubt, before you do anything else, check your status and read
       it carefully, many questions are answered directly by the git status
       output.
   Using git to send patch emails
       Please read perlhack first in order to figure out where your patches
       should be sent.
       In your ~/git/perl repository, set the destination email to perl's bug
       tracker:
         $ git config sendemail.to perlbug AT perl.org
       Or maybe perl5-porters:
         $ git config sendemail.to perl5-porters AT perl.org
       Then you can use git directly to send your patch emails:
         $ git send-email 0001-Rename-Leon-Brocard-to-Orange-Brocard.patch
       You may need to set some configuration variables for your particular
       email service provider. For example, to set your global git config to
       send email via a gmail account:
         $ git config --global sendemail.smtpserver smtp.gmail.com
         $ git config --global sendemail.smtpssl 1
         $ git config --global sendemail.smtpuser YOURUSERNAME AT gmail.com
       With this configuration, you will be prompted for your gmail password
       when you run 'git send-email'. You can also configure
       "sendemail.smtppass" with your password if you don't care about having
       your password in the .gitconfig file.
   A note on derived files
       Be aware that many files in the distribution are derivative--avoid
       patching them, because git won't see the changes to them, and the build
       process will overwrite them. Patch the originals instead. Most
       utilities (like perldoc) are in this category, i.e. patch
       utils/perldoc.PL rather than utils/perldoc. Similarly, don't create
       patches for files under $src_root/ext from their copies found in
       $install_root/lib. If you are unsure about the proper location of a
       file that may have gotten copied while building the source
       distribution, consult the "MANIFEST".
   Cleaning a working directory
       The command "git clean" can with varying arguments be used as a
       replacement for "make clean".
       To reset your working directory to a pristine condition you can do:
         % git clean -dxf
       However, be aware this will delete ALL untracked content. You can use
         % git clean -Xf
       to remove all ignored untracked files, such as build and test
       byproduct, but leave any  manually created files alone.
       If you only want to cancel some uncommitted edits, you can use "git
       checkout" and give it a list of files to be reverted, or "git checkout
       -f" to revert them all.
       If you want to cancel one or several commits, you can use "git reset".
   Bisecting
       "git" provides a built-in way to determine which commit should be
       blamed for introducing a given bug. "git bisect" performs a binary
       search of history to locate the first failing commit. It is fast,
       powerful and flexible, but requires some setup and to automate the
       process an auxiliary shell script is needed.
       The core provides a wrapper program, Porting/bisect.pl, which attempts
       to simplify as much as possible, making bisecting as simple as running
       a Perl one-liner. For example, if you want to know when this became an
       error:
           perl -e 'my $a := 2'
       you simply run this:
           .../Porting/bisect.pl -e 'my $a := 2;'
       Using "bisect.pl", with one command (and no other files) it's easy to
       find out
       o   Which commit caused this example code to break?
       o   Which commit caused this example code to start working?
       o   Which commit added the first file to match this regex?
       o   Which commit removed the last file to match this regex?
       usually without needing to know which versions of perl to use as start
       and end revisions, as bisect.pl automatically searches to find the
       earliest stable version for which the test case passes. Run
       "Porting/bisect.pl --help" for the full documentation, including how to
       set the "Configure" and build time options.
       If you require more flexibility than Porting/bisect.pl has to offer,
       you'll need to run "git bisect" yourself. It's most useful to use "git
       bisect run" to automate the building and testing of perl revisions. For
       this you'll need a shell script for "git" to call to test a particular
       revision. An example script is Porting/bisect-example.sh, which you
       should copy outside of the repository, as the bisect process will reset
       the state to a clean checkout as it runs. The instructions below assume
       that you copied it as ~/run and then edited it as appropriate.
       You first enter in bisect mode with:
         % git bisect start
       For example, if the bug is present on "HEAD" but wasn't in 5.10.0,
       "git" will learn about this when you enter:
         % git bisect bad
         % git bisect good perl-5.10.0
         Bisecting: 853 revisions left to test after this
       This results in checking out the median commit between "HEAD" and
       "perl-5.10.0". You can then run the bisecting process with:
         % git bisect run ~/run
       When the first bad commit is isolated, "git bisect" will tell you so:
         ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5 is first bad commit
         commit ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5
         Author: Dave Mitchell <davem AT fdisolutions.com>
         Date:   Sat Feb 9 14:56:23 2008 +0000
             [perl #49472] Attributes + Unknown Error
             ...
         bisect run success
       You can peek into the bisecting process with "git bisect log" and "git
       bisect visualize". "git bisect reset" will get you out of bisect mode.
       Please note that the first "good" state must be an ancestor of the
       first "bad" state. If you want to search for the commit that solved
       some bug, you have to negate your test case (i.e. exit with 1 if OK and
       0 if not) and still mark the lower bound as "good" and the upper as
       "bad". The "first bad commit" has then to be understood as the "first
       commit where the bug is solved".
       "git help bisect" has much more information on how you can tweak your
       binary searches.
Topic branches and rewriting history
       Individual committers should create topic branches under
       yourname/some_descriptive_name. Other committers should check with a
       topic branch's creator before making any change to it.
       The simplest way to create a remote topic branch that works on all
       versions of git is to push the current head as a new branch on the
       remote, then check it out locally:
         $ branch="$yourname/$some_descriptive_name"
         $ git push origin HEAD:$branch
         $ git checkout -b $branch origin/$branch
       Users of git 1.7 or newer can do it in a more obvious manner:
         $ branch="$yourname/$some_descriptive_name"
         $ git checkout -b $branch
         $ git push origin -u $branch
       If you are not the creator of yourname/some_descriptive_name, you might
       sometimes find that the original author has edited the branch's
       history. There are lots of good reasons for this. Sometimes, an author
       might simply be rebasing the branch onto a newer source point.
       Sometimes, an author might have found an error in an early commit which
       they wanted to fix before merging the branch to blead.
       Currently the master repository is configured to forbid non-fast-
       forward merges. This means that the branches within can not be rebased
       and pushed as a single step.
       The only way you will ever be allowed to rebase or modify the history
       of a pushed branch is to delete it and push it as a new branch under
       the same name. Please think carefully about doing this. It may be
       better to sequentially rename your branches so that it is easier for
       others working with you to cherry-pick their local changes onto the new
       version. (XXX: needs explanation).
       If you want to rebase a personal topic branch, you will have to delete
       your existing topic branch and push as a new version of it. You can do
       this via the following formula (see the explanation about "refspec"'s
       in the git push documentation for details) after you have rebased your
       branch:
          # first rebase
          $ git checkout $user/$topic
          $ git fetch
          $ git rebase origin/blead
          # then "delete-and-push"
          $ git push origin :$user/$topic
          $ git push origin $user/$topic
       NOTE: it is forbidden at the repository level to delete any of the
       "primary" branches. That is any branch matching
       "m!^(blead|maint|perl)!". Any attempt to do so will result in git
       producing an error like this:
           $ git push origin :blead
           *** It is forbidden to delete blead/maint branches in this repository
           error: hooks/update exited with error code 1
           error: hook declined to update refs/heads/blead
           To ssh://perl5.git.perl.org/perl
            ! [remote rejected] blead (hook declined)
            error: failed to push some refs to 'ssh://perl5.git.perl.org/perl'
       As a matter of policy we do not edit the history of the blead and
       maint-* branches. If a typo (or worse) sneaks into a commit to blead or
       maint-*, we'll fix it in another commit. The only types of updates
       allowed on these branches are "fast-forward's", where all history is
       preserved.
       Annotated tags in the canonical perl.git repository will never be
       deleted or modified. Think long and hard about whether you want to push
       a local tag to perl.git before doing so. (Pushing unannotated tags is
       not allowed.)
   Grafts
       The perl history contains one mistake which was not caught in the
       conversion: a merge was recorded in the history between blead and
       maint-5.10 where no merge actually occurred. Due to the nature of git,
       this is now impossible to fix in the public repository. You can remove
       this mis-merge locally by adding the following line to your
       ".git/info/grafts" file:
         296f12bbbbaa06de9be9d09d3dcf8f4528898a49 434946e0cb7a32589ed92d18008aaa1d88515930
       It is particularly important to have this graft line if any bisecting
       is done in the area of the "merge" in question.
WRITE ACCESS TO THE GIT REPOSITORY
       Once you have write access, you will need to modify the URL for the
       origin remote to enable pushing. Edit .git/config with the
       git-config(1) command:
         % git config remote.origin.url ssh://perl5.git.perl.org/perl.git
       You can also set up your user name and e-mail address. Most people do
       this once globally in their ~/.gitconfig by doing something like:
         % git config --global user.name "var Arnfjoer` Bjarmason"
         % git config --global user.email avarab AT gmail.com
       However if you'd like to override that just for perl then execute then
       execute something like the following in perl:
         % git config user.email avar AT cpan.org
       It is also possible to keep "origin" as a git remote, and add a new
       remote for ssh access:
         % git remote add camel perl5.git.perl.org:/perl.git
       This allows you to update your local repository by pulling from
       "origin", which is faster and doesn't require you to authenticate, and
       to push your changes back with the "camel" remote:
         % git fetch camel
         % git push camel
       The "fetch" command just updates the "camel" refs, as the objects
       themselves should have been fetched when pulling from "origin".
Accepting a patch
       If you have received a patch file generated using the above section,
       you should try out the patch.
       First we need to create a temporary new branch for these changes and
       switch into it:
         % git checkout -b experimental
       Patches that were formatted by "git format-patch" are applied with "git
       am":
         % git am 0001-Rename-Leon-Brocard-to-Orange-Brocard.patch
         Applying Rename Leon Brocard to Orange Brocard
       If just a raw diff is provided, it is also possible use this two-step
       process:
         % git apply bugfix.diff
         % git commit -a -m "Some fixing" --author="That Guy <that.guy AT internets.com>"
       Now we can inspect the change:
         % git show HEAD
         commit b1b3dab48344cff6de4087efca3dbd63548ab5e2
         Author: Leon Brocard <acme AT astray.com>
         Date:   Fri Dec 19 17:02:59 2008 +0000
           Rename Leon Brocard to Orange Brocard
         diff --git a/AUTHORS b/AUTHORS
         index 293dd70..722c93e 100644
         --- a/AUTHORS
         +++ b/AUTHORS
         @@ -541,7 +541,7 @@ Lars Hecking                        <lhecking AT nmrc.ie>
          Laszlo Molnar                  <laszlo.molnar AT eth.se>
          Leif Huhn                      <leif AT hale.com>
          Len Johnson                    <lenjay AT ibm.net>
         -Leon Brocard                   <acme AT astray.com>
         +Orange Brocard                 <acme AT astray.com>
          Les Peters                     <lpeters AT aol.net>
          Lesley Binks                   <lesley.binks AT gmail.com>
          Lincoln D. Stein               <lstein AT cshl.org>
       If you are a committer to Perl and you think the patch is good, you can
       then merge it into blead then push it out to the main repository:
         % git checkout blead
         % git merge experimental
         % git push
       If you want to delete your temporary branch, you may do so with:
         % git checkout blead
         % git branch -d experimental
         error: The branch 'experimental' is not an ancestor of your current HEAD.
         If you are sure you want to delete it, run 'git branch -D experimental'.
         % git branch -D experimental
         Deleted branch experimental.
   Committing to blead
       The 'blead' branch will become the next production release of Perl.
       Before pushing any local change to blead, it's incredibly important
       that you do a few things, lest other committers come after you with
       pitchforks and torches:
       o   Make sure you have a good commit message. See "Commit message" in
           perlhack for details.
       o   Run the test suite. You might not think that one typo fix would
           break a test file. You'd be wrong. Here's an example of where not
           running the suite caused problems. A patch was submitted that added
           a couple of tests to an existing .t. It couldn't possibly affect
           anything else, so no need to test beyond the single affected .t,
           right?  But, the submitter's email address had changed since the
           last of their submissions, and this caused other tests to fail.
           Running the test target given in the next item would have caught
           this problem.
       o   If you don't run the full test suite, at least "make test_porting".
           This will run basic sanity checks. To see which sanity checks, have
           a look in t/porting.
       o   If you make any changes that affect miniperl or core routines that
           have different code paths for miniperl, be sure to run "make
           minitest".  This will catch problems that even the full test suite
           will not catch because it runs a subset of tests under miniperl
           rather than perl.
       On merging and rebasing
       Simple, one-off commits pushed to the 'blead' branch should be simple
       commits that apply cleanly.  In other words, you should make sure your
       work is committed against the current position of blead, so that you
       can push back to the master repository without merging.
       Sometimes, blead will move while you're building or testing your
       changes.  When this happens, your push will be rejected with a message
       like this:
         To ssh://perl5.git.perl.org/perl.git
          ! [rejected]        blead -> blead (non-fast-forward)
         error: failed to push some refs to 'ssh://perl5.git.perl.org/perl.git'
         To prevent you from losing history, non-fast-forward updates were rejected
         Merge the remote changes (e.g. 'git pull') before pushing again.  See the
         'Note about fast-forwards' section of 'git push --help' for details.
       When this happens, you can just rebase your work against the new
       position of blead, like this (assuming your remote for the master
       repository is "p5p"):
         $ git fetch p5p
         $ git rebase p5p/blead
       You will see your commits being re-applied, and you will then be able
       to push safely.  More information about rebasing can be found in the
       documentation for the git-rebase(1) command.
       For larger sets of commits that only make sense together, or that would
       benefit from a summary of the set's purpose, you should use a merge
       commit.  You should perform your work on a topic branch, which you
       should regularly rebase against blead to ensure that your code is not
       broken by blead moving.  When you have finished your work, please
       perform a final rebase and test.  Linear history is something that gets
       lost with every commit on blead, but a final rebase makes the history
       linear again, making it easier for future maintainers to see what has
       happened.  Rebase as follows (assuming your work was on the branch
       "committer/somework"):
         $ git checkout committer/somework
         $ git rebase blead
       Then you can merge it into master like this:
         $ git checkout blead
         $ git merge --no-ff --no-commit committer/somework
         $ git commit -a
       The switches above deserve explanation.  "--no-ff" indicates that even
       if all your work can be applied linearly against blead, a merge commit
       should still be prepared.  This ensures that all your work will be
       shown as a side branch, with all its commits merged into the mainstream
       blead by the merge commit.
       "--no-commit" means that the merge commit will be prepared but not
       committed.  The commit is then actually performed when you run the next
       command, which will bring up your editor to describe the commit.
       Without "--no-commit", the commit would be made with nearly no useful
       message, which would greatly diminish the value of the merge commit as
       a placeholder for the work's description.
       When describing the merge commit, explain the purpose of the branch,
       and keep in mind that this description will probably be used by the
       eventual release engineer when reviewing the next perldelta document.
   Committing to maintenance versions
       Maintenance versions should only be altered to add critical bug fixes,
       see perlpolicy.
       To commit to a maintenance version of perl, you need to create a local
       tracking branch:
         % git checkout --track -b maint-5.005 origin/maint-5.005
       This creates a local branch named "maint-5.005", which tracks the
       remote branch "origin/maint-5.005". Then you can pull, commit, merge
       and push as before.
       You can also cherry-pick commits from blead and another branch, by
       using the "git cherry-pick" command. It is recommended to use the -x
       option to "git cherry-pick" in order to record the SHA1 of the original
       commit in the new commit message.
       Before pushing any change to a maint version, make sure you've
       satisfied the steps in "Committing to blead" above.
   Merging from a branch via GitHub
       While we don't encourage the submission of patches via GitHub, that
       will still happen. Here is a guide to merging patches from a GitHub
       repository.
         % git remote add avar git://github.com/avar/perl.git
         % git fetch avar
       Now you can see the differences between the branch and blead:
         % git diff avar/orange
       And you can see the commits:
         % git log avar/orange
       If you approve of a specific commit, you can cherry pick it:
         % git cherry-pick 0c24b290ae02b2ab3304f51d5e11e85eb3659eae
       Or you could just merge the whole branch if you like it all:
         % git merge avar/orange
       And then push back to the repository:
         % git push
   A note on camel and dromedary
       The committers have SSH access to the two servers that serve
       "perl5.git.perl.org". One is "perl5.git.perl.org" itself (camel), which
       is the 'master' repository. The second one is
       "users.perl5.git.perl.org" (dromedary), which can be used for general
       testing and development. Dromedary syncs the git tree from camel every
       few minutes, you should not push there. Both machines also have a full
       CPAN mirror in /srv/CPAN, please use this. To share files with the
       general public, dromedary serves your ~/public_html/ as
       "http://users.perl5.git.perl.org/~yourlogin/"
       These hosts have fairly strict firewalls to the outside. Outgoing, only
       rsync, ssh and git are allowed. For http and ftp, you can use
       http://webproxy:3128 as proxy. Incoming, the firewall tries to detect
       attacks and blocks IP addresses with suspicious activity. This
       sometimes (but very rarely) has false positives and you might get
       blocked. The quickest way to get unblocked is to notify the admins.
       These two boxes are owned, hosted, and operated by booking.com. You can
       reach the sysadmins in #p5p on irc.perl.org or via mail to
       "perl5-porters AT perl.org".

perl v5.16.3                      2013-03-04                        PERLGIT(1)