ldap.conf(images) - phpMan

LDAP.CONF(5)                  File Formats Manual                 LDAP.CONF(5)

NAME
       ldap.conf, .ldaprc - LDAP configuration file/environment variables
SYNOPSIS
       /etc/openldap/ldap.conf, ldaprc, .ldaprc, $LDAP<option-name>
DESCRIPTION
       If  the  environment  variable LDAPNOINIT is defined, all defaulting is
       disabled.
       The ldap.conf configuration file is used to set system-wide defaults to
       be applied when running ldap clients.
       Users  may create an optional configuration file, ldaprc or .ldaprc, in
       their home directory which will be used  to  override  the  system-wide
       defaults file.  The file ldaprc in the current working directory is NOT
       used (this differs from upstream).
       Additional configuration files can be specified using the LDAPCONF  and
       LDAPRC  environment  variables.   LDAPCONF  may be set to the path of a
       configuration file.  This path can be absolute or relative to the  cur-
       rent working directory.  The LDAPRC, if defined, should be the basename
       of a file in the current working directory or in the user's home direc-
       tory.
       Environmental  variables  may  also  be  used to augment the file based
       defaults.  The name of the variable is the option name  with  an  added
       prefix  of  LDAP.  For example, to define BASE via the environment, set
       the variable LDAPBASE to the desired value.
       Some options are user-only.  Such options are ignored if present in the
       ldap.conf (or file specified by LDAPCONF).
       Thus the following files and variables are read, in order:
           variable     $LDAPNOINIT, and if that is not set:
           system file  /etc/openldap/ldap.conf,
           user files   $HOME/ldaprc,  $HOME/.ldaprc,  (NOT ./ldaprc, see above),
           system file  $LDAPCONF,
           user files   $HOME/$LDAPRC, $HOME/.$LDAPRC, ./$LDAPRC,
           variables    $LDAP<uppercase option name>.
       Settings late in the list override earlier ones.
SYNTAX
       The  configuration options are case-insensitive; their value, on a case
       by case basis, may be case-sensitive.
       Blank lines are ignored.
       Lines beginning with a hash mark (`#') are comments, and ignored.
       Valid lines are made of an option's name  (a  sequence  of  non-blanks,
       conventionally  written  in uppercase, although not required), followed
       by a value.  The value starts with the first non-blank character  after
       the  option's  name,  and  terminates at the end of the line, or at the
       last sequence of blanks before the end of the line.   The  tokenization
       of  the  value, if any, is delegated to the handler(s) for that option,
       if any.  Quoting values that contain blanks may be  incorrect,  as  the
       quotes would become part of the value.  For example,
            # Wrong - erroneous quotes:
            URI     "ldap:// ldaps://"
            # Right - space-separated list of URIs, without quotes:
            URI     ldap:// ldaps://
            # Right - DN syntax needs quoting for Example, Inc:
            BASE    ou=IT staff,o="Example, Inc",c=US
            # or:
            BASE    ou=IT staff,o=Example2C Inc,c=US
            # Wrong - comment on same line as option:
            DEREF   never           # Never follow aliases
       A  line  cannot be longer than LINE_MAX, which should be more than 2000
       bytes on all platforms.  There is no mechanism to split a long line  on
       multiple  lines,  either  for  beautification  or to overcome the above
       limit.
OPTIONS
       The different configuration options are:
       URI <ldap[si]://[name[:port]] ...>
              Specifies the URI(s) of an LDAP  server(s)  to  which  the  LDAP
              library  should  connect.   The  URI  scheme may be any of ldap,
              ldaps or ldapi, which refer to LDAP  over  TCP,  LDAP  over  SSL
              (TLS)  and  LDAP  over  IPC (UNIX domain sockets), respectively.
              Each server's name can be specified as a domain-style name or an
              IP  address literal.  Optionally, the server's name can followed
              by a ':' and the port number the LDAP server  is  listening  on.
              If  no  port number is provided, the default port for the scheme
              is used (389 for ldap://, 636 for ldaps://).  For LDAP over IPC,
              name  is  the  name  of the socket, and no port is required, nor
              allowed; note that directory  separators  must  be  URL-encoded,
              like  any  other  characters  that  are  special to URLs; so the
              socket
                   /usr/local/var/ldapi
              must be specified as
                   ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi
              A space separated list of URIs may be provided.
       BASE <base>
              Specifies the default base DN to use when performing ldap opera-
              tions.   The  base  must be specified as a Distinguished Name in
              LDAP format.
       BINDDN <dn>
              Specifies the default bind DN to use when performing ldap opera-
              tions.  The bind DN must be specified as a Distinguished Name in
              LDAP format.  This is a user-only option.
       DEREF <when>
              Specifies how alias dereferencing  is  done  when  performing  a
              search. The <when> can be specified as one of the following key-
              words:
              never  Aliases are never dereferenced. This is the default.
              searching
                     Aliases are dereferenced  in  subordinates  of  the  base
                     object,  but  not  in  locating  the  base  object of the
                     search.
              finding
                     Aliases are only  dereferenced  when  locating  the  base
                     object of the search.
              always Aliases  are dereferenced both in searching and in locat-
                     ing the base object of the search.

       HOST <name[:port] ...>
              Specifies the name(s) of an LDAP server(s) to  which  the
              LDAP  library  should connect.  Each server's name can be
              specified as a domain-style name or  an  IP  address  and
              optionally followed by a ':' and the port number the ldap
              server is listening on.  A space separated list of  hosts
              may be provided.  HOST is deprecated in favor of URI.
       NETWORK_TIMEOUT <integer>
              Specifies  the  timeout  (in  seconds)  after  which  the
              poll(2)/select(2) following a connect(2) returns in  case
              of no activity.
       PORT <port>
              Specifies  the  default port used when connecting to LDAP
              servers(s).  The port may be specified as a number.  PORT
              is deprecated in favor of URI.
       REFERRALS <on/true/yes/off/false/no>
              Specifies  if  the  client  should  automatically  follow
              referrals returned by LDAP servers.  The default  is  on.
              Note that the command line tools ldapsearch(1) &co always
              override this option.
       SIZELIMIT <integer>
              Specifies a size limit (number of entries)  to  use  when
              performing searches.  The number should be a non-negative
              integer.  SIZELIMIT of zero (0) specifies a  request  for
              unlimited  search  size.  Please note that the server may
              still apply  any  server-side  limit  on  the  amount  of
              entries that can be returned by a search operation.
       TIMELIMIT <integer>
              Specifies  a time limit (in seconds) to use when perform-
              ing searches.  The number should be a non-negative  inte-
              ger.   TIMELIMIT  of  zero (0) specifies unlimited search
              time to be used.  Please note that the server  may  still
              apply  any  server-side limit on the duration of a search
              operation.  VERSION {2|3} Specifies what version  of  the
              LDAP protocol should be used.
       TIMEOUT <integer>
              Specifies  a  timeout  (in  seconds) after which calls to
              synchronous LDAP  APIs  will  abort  if  no  response  is
              received.  Also used for any ldap_result(3) calls where a
              NULL timeout parameter is supplied.
SASL OPTIONS
       If OpenLDAP is built with  Simple  Authentication  and  Security
       Layer support, there are more options you can specify.
       SASL_MECH <mechanism>
              Specifies the SASL mechanism to use.  This is a user-only
              option.
       SASL_REALM <realm>
              Specifies the SASL realm.  This is a user-only option.
       SASL_AUTHCID <authcid>
              Specifies the authentication identity.  This is  a  user-
              only option.
       SASL_AUTHZID <authcid>
              Specifies  the  proxy  authorization identity.  This is a
              user-only option.
       SASL_SECPROPS <properties>
              Specifies Cyrus SASL security  properties.  The  <proper-
              ties>  can  be specified as a comma-separated list of the
              following:
              none   (without any other properties) causes the  proper-
                     ties   defaults   ("noanonymous,noplain")   to  be
                     cleared.
              noplain
                     disables mechanisms susceptible to simple  passive
                     attacks.
              noactive
                     disables mechanisms susceptible to active attacks.
              nodict disables mechanisms susceptible to passive dictio-
                     nary attacks.
              noanonymous
                     disables mechanisms which support anonymous login.
              forwardsec
                     requires forward secrecy between sessions.
              passcred
                     requires mechanisms which pass client  credentials
                     (and  allows mechanisms which can pass credentials
                     to do so).
              minssf=<factor>
                     specifies the minimum acceptable security strength
                     factor  as  an integer approximating the effective
                     key length used for encryption.  0 (zero)  implies
                     no  protection,  1  implies  integrity  protection
                     only, 56 allows DES or  other  weak  ciphers,  112
                     allows  triple  DES  and other strong ciphers, 128
                     allows  RC4,  Blowfish  and  other  modern  strong
                     ciphers.  The default is 0.
              maxssf=<factor>
                     specifies the maximum acceptable security strength
                     factor as an  integer  (see  minssf  description).
                     The default is INT_MAX.
              maxbufsize=<factor>
                     specifies  the maximum security layer receive buf-
                     fer size allowed.   0  disables  security  layers.
                     The default is 65536.
       SASL_NOCANON <on/true/yes/off/false/no>
              Do  not  perform reverse DNS lookups to canonicalize SASL
              host names. The default is off.
GSSAPI OPTIONS
       If OpenLDAP is built with Generic Security Services  Application
       Programming  Interface  support,  there are more options you can
       specify.
       GSSAPI_SIGN <on/true/yes/off/false/no>
              Specifies if GSSAPI signing (GSS_C_INTEG_FLAG) should  be
              used.  The default is off.
       GSSAPI_ENCRYPT <on/true/yes/off/false/no>
              Specifies  if  GSSAPI  encryption  (GSS_C_INTEG_FLAG  and
              GSS_C_CONF_FLAG) should be used. The default is off.
       GSSAPI_ALLOW_REMOTE_PRINCIPAL <on/true/yes/off/false/no>
              Specifies if GSSAPI based authentication  should  try  to
              form the target principal name out of the ldapServiceName
              or dnsHostName attribute of the  targets  RootDSE  entry.
              The default is off.
TLS OPTIONS
       If  OpenLDAP  is  built  with  Transport Layer Security support,
       there are more options you can specify.  These options are  used
       when  an  ldaps://  URI is selected (by default or otherwise) or
       when the application negotiates TLS by issuing the LDAP StartTLS
       operation.
       TLS_CACERT <filename>
              Specifies  the file that contains certificates for all of
              the Certificate Authorities the client will recognize.
       TLS_CACERTDIR <path>
              Specifies the path of a directory that contains  Certifi-
              cate Authority certificates in separate individual files.
              The TLS_CACERT is always used before TLS_CACERTDIR.   The
              specified  directory  must  be  managed  with the OpenSSL
              c_rehash utility.  This parameter is ignored with GnuTLS.
              When using Mozilla NSS, <path> may contain a Mozilla  NSS
              cert/key  database.   If  <path>  contains  a Mozilla NSS
              cert/key database and CA cert files,  OpenLDAP  will  use
              the cert/key database and will ignore the CA cert files.
       TLS_CERT <filename>
              Specifies  the file that contains the client certificate.
              This is a user-only option.
              When using Mozilla NSS,  if  using  a  cert/key  database
              (specified  with  TLS_CACERTDIR),  TLS_CERT specifies the
              name of the certificate to use:
                   TLS_CERT Certificate for Sam Carter
              If using a token other than the internal built in  token,
              specify the token name first, followed by a colon:
                   TLS_CERT my hardware device:Certificate for Sam Carter
              Use certutil -L to list the certificates by name:
                   certutil -d /path/to/certdbdir -L
       TLS_KEY <filename>
              Specifies  the  file  that  contains the private key that
              matches the certificate stored in the TLS_CERT file. Cur-
              rently,  the  private  key  must  not be protected with a
              password, so it is of critical importance  that  the  key
              file is protected carefully.  This is a user-only option.
              When  using  Mozilla NSS, TLS_KEY specifies the name of a
              file that contains the password for the key for the  cer-
              tificate  specified  with  TLS_CERT.  The modutil command
              can be used to  turn  off  password  protection  for  the
              cert/key  database.  For example, if TLS_CACERTDIR speci-
              fies  /home/scarter/.moznss  as  the  location   of   the
              cert/key  database, use modutil to change the password to
              the empty string:
                   modutil -dbdir ~/.moznss -changepw 'NSS Certificate DB'
              You must have the old password, if any.  Ignore the WARN-
              ING about the running browser.  Press 'Enter' for the new
              password.

       TLS_CIPHER_SUITE <cipher-suite-spec>
              Specifies acceptable cipher suite and  preference  order.
              <cipher-suite-spec>  should be a cipher specification for
              the TLS library in use (OpenSSL, GnuTLS, or Mozilla NSS).
              Example:
                     OpenSSL:
                            TLS_CIPHER_SUITE HIGH:MEDIUM:+SSLv2
                     GnuTLS:
                            TLS_CIPHER_SUITE SECURE256:!AES-128-CBC
              To  check  what  ciphers a given spec selects in OpenSSL,
              use:
                   openssl ciphers -v <cipher-suite-spec>
              With GnuTLS the available specs can be found in the  man-
              ual  page  of  gnutls-cli(1)  (see the description of the
              option --priority).
              In older versions of GnuTLS, where  gnutls-cli  does  not
              support the option --priority, you can obtain the -- more
              limited -- list of ciphers by calling:
                   gnutls-cli -l
              When using Mozilla NSS, the OpenSSL cipher suite specifi-
              cations  are  used  and  translated  into the format used
              internally by Mozilla NSS.  There isn't an  easy  way  to
              list  the  cipher  suites  from  the  command  line.  The
              authoritative list is in the source code for Mozilla  NSS
              in the file sslinfo.c in the structure
                      static const SSLCipherSuiteInfo suiteInfo[]
       TLS_PROTOCOL_MIN <major>[.<minor>]
              Specifies  minimum  SSL/TLS protocol version that will be
              negotiated.  If the server doesn't support at least  that
              version, the SSL handshake will fail.  To require TLS 1.x
              or higher, set this option to 3.(x+1), e.g.,
                   TLS_PROTOCOL_MIN 3.2
              would require TLS 1.1.   Specifying  a  minimum  that  is
              higher than that supported by the OpenLDAP implementation
              will result in it requiring the  highest  level  that  it
              does support.  This parameter is ignored with GnuTLS.
       TLS_RANDFILE <filename>
              Specifies  the  file  to  obtain  random  bits  from when
              /dev/[u]random is not available.  Generally  set  to  the
              name  of  the EGD/PRNGD socket.  The environment variable
              RANDFILE can also be used to specify the filename.   This
              parameter is ignored with GnuTLS and Mozilla NSS.
       TLS_REQCERT <level>
              Specifies  what  checks to perform on server certificates
              in a TLS session.  The <level> can be specified as one of
              the following keywords:
              never  The  client  will  not request or check any server
                     certificate.
              allow  The server certificate is  requested.   If  a  bad
                     certificate  is  provided,  it will be ignored and
                     the session proceeds normally.
              try    The server certificate is requested. If a bad cer-
                     tificate  is  provided, the session is immediately
                     terminated.
              demand | hard
                     These keywords  are  equivalent  and  semantically
                     same as try.  This is the default setting.
       TLS_CRLCHECK <level>
              Specifies if the Certificate Revocation List (CRL) of the
              CA should be used to verify if  the  server  certificates
              have not been revoked. This requires TLS_CACERTDIR param-
              eter to be set. This parameter is ignored with GnuTLS and
              Mozilla NSS.  <level> can be specified as one of the fol-
              lowing keywords:
              none   No CRL checks are performed
              peer   Check the CRL of the peer certificate
              all    Check the CRL for a whole certificate chain
       TLS_CRLFILE <filename>
              Specifies the file containing  a  Certificate  Revocation
              List to be used to verify if the server certificates have
              not been revoked. This parameter is only  supported  with
              GnuTLS and Mozilla NSS.
       TLS_MOZNSS_COMPATIBILITY <on/true/yes/off/false/no>
              Specifies whether the MozNSS database compatibility layer
              for TLS options should be enabled. This options is avail-
              able  only  if  OpenLDAP  is compiled with OpenSSL.  This
              option defaults to be on.
ENVIRONMENT VARIABLES
       LDAPNOINIT
              disable all defaulting
       LDAPCONF
              path of a configuration file
       LDAPRC basename of ldaprc file in $HOME or $CWD
       LDAP<option-name>
              Set <option-name> as from ldap.conf
FILES
       /etc/openldap/ldap.conf
              system-wide ldap configuration file
       $HOME/ldaprc, $HOME/.ldaprc
              user ldap configuration file
       $CWD/ldaprc
              local ldap configuration file
SEE ALSO
       ldap(3), ldap_set_option(3), ldap_result(3), openssl(1), sasl(3)
AUTHOR
       Kurt Zeilenga, The OpenLDAP Project
ACKNOWLEDGEMENTS
       OpenLDAP Software is developed and maintained  by  The  OpenLDAP
       Project   <http://www.openldap.org/>;.    OpenLDAP   Software  is
       derived from University of Michigan LDAP 3.3 Release.

OpenLDAP 2.4.44                   2016/02/05                      LDAP.CONF(5)