gpg2(images) - phpMan

GPG2(1)                        GNU Privacy Guard                       GPG2(1)

NAME
       gpg2 - OpenPGP encryption and signing tool
SYNOPSIS
       gpg2 [--homedir dir] [--options file] [options] command [args]

DESCRIPTION
       gpg2 is the OpenPGP part of the GNU Privacy Guard (GnuPG). It is a tool
       to provide digital encryption and signing services  using  the  OpenPGP
       standard. gpg2 features complete key management and all bells and whis-
       tles you can expect from a decent OpenPGP implementation.

       In contrast to the standalone version gpg, which  is  more  suited  for
       server and embedded platforms, this version is commonly installed under
       the name gpg2 and more targeted to the desktop as it  requires  several
       other  modules  to  be  installed.  The standalone version will be kept
       maintained and it is possible to install both versions on the same sys-
       tem.  If you need to use different configuration files, you should make
       use of something like `gpg.conf-2' instead of just `gpg.conf'.



RETURN VALUE
       The program returns 0 if everything was fine, 1 if at least a signature
       was bad, and other error codes for fatal errors.

WARNINGS
       Use  a *good* password for your user account and a *good* passphrase to
       protect your secret key. This passphrase is the  weakest  part  of  the
       whole  system. Programs to do dictionary attacks on your secret keyring
       are very easy to write and  so  you  should  protect  your  "~/.gnupg/"
       directory very well.
       Keep  in mind that, if this program is used over a network (telnet), it
       is *very* easy to spy out your passphrase!
       If you are going to verify detached signatures, make sure that the pro-
       gram  knows about it; either give both filenames on the command line or
       use '-' to specify STDIN.

INTEROPERABILITY
       GnuPG tries to be a very flexible implementation of the  OpenPGP  stan-
       dard. In particular, GnuPG implements many of the optional parts of the
       standard, such as the SHA-512 hash, and the ZLIB and BZIP2  compression
       algorithms.  It  is important to be aware that not all OpenPGP programs
       implement these optional algorithms and that by forcing their  use  via
       the  --cipher-algo,  --digest-algo,  --cert-digest-algo, or --compress-
       algo options in GnuPG, it is  possible  to  create  a  perfectly  valid
       OpenPGP message, but one that cannot be read by the intended recipient.
       There  are dozens of variations of OpenPGP programs available, and each
       supports a slightly different subset of these optional algorithms.  For
       example,  until  recently,  no  (unhacked) version of PGP supported the
       BLOWFISH cipher algorithm. A message using BLOWFISH simply could not be
       read by a PGP user. By default, GnuPG uses the standard OpenPGP prefer-
       ences system that will always do the right thing  and  create  messages
       that  are usable by all recipients, regardless of which OpenPGP program
       they use. Only override this safe default if you really know  what  you
       are doing.
       If you absolutely must override the safe default, or if the preferences
       on a given key are invalid for some reason,  you  are  far  better  off
       using  the --pgp6, --pgp7, or --pgp8 options. These options are safe as
       they do not force any particular algorithms in  violation  of  OpenPGP,
       but rather reduce the available algorithms to a "PGP-safe" list.

COMMANDS
       Commands  are  not  distinguished from options except for the fact that
       only one command is allowed.
       gpg2 may be run with no commands, in which case it will perform a  rea-
       sonable  action  depending on the type of file it is given as input (an
       encrypted message is decrypted, a signature is verified,  a  file  con-
       taining keys is listed).
       Please remember that option as well as command parsing stops as soon as
       a non-option is encountered, you can explicitly stop parsing  by  using
       the special option --.



   Commands not specific to the function

       --version
              Print  the program version and licensing information.  Note that
              you cannot abbreviate this command.

       --help
       -h     Print a usage message summarizing the most useful  command  line
              options.  Note that you cannot abbreviate this command.

       --warranty
              Print warranty information.

       --dump-options
              Print  a  list of all available options and commands.  Note that
              you cannot abbreviate this command.


   Commands to select the type of operation


       --sign
       -s     Make a signature. This command may be  combined  with  --encrypt
              (for  a signed and encrypted message), --symmetric (for a signed
              and symmetrically encrypted message), or --encrypt and --symmet-
              ric  together  (for a signed message that may be decrypted via a
              secret key or a passphrase).  The key to be used for signing  is
              chosen  by  default  or  can  be  set  with the --local-user and
              --default-key options.

       --clearsign
              Make a clear text signature.  The content in a clear text signa-
              ture  is readable without any special software. OpenPGP software
              is only needed to verify the signature.  Clear  text  signatures
              may  modify end-of-line whitespace for platform independence and
              are not intended to be reversible.  The key to be used for sign-
              ing is chosen by default or can be set with the --local-user and
              --default-key options.

       --detach-sign
       -b     Make a detached signature.

       --encrypt
       -e     Encrypt data. This option may be combined  with  --sign  (for  a
              signed  and  encrypted message), --symmetric (for a message that
              may be decrypted via a secret key or a  passphrase),  or  --sign
              and  --symmetric  together  (for  a  signed  message that may be
              decrypted via a secret key or a passphrase).

       --symmetric
       -c     Encrypt with a symmetric cipher using a passphrase. The  default
              symmetric  cipher  used  is  CAST5,  but  may be chosen with the
              --cipher-algo option. This option may be  combined  with  --sign
              (for  a  signed  and symmetrically encrypted message), --encrypt
              (for a message that may be decrypted  via  a  secret  key  or  a
              passphrase), or --sign and --encrypt together (for a signed mes-
              sage that may be decrypted via a secret key or a passphrase).

       --store
              Store only (make a simple RFC1991 literal data packet).

       --decrypt
       -d     Decrypt the file given on the command line (or STDIN if no  file
              is specified) and write it to STDOUT (or the file specified with
              --output). If the decrypted file is  signed,  the  signature  is
              also  verified. This command differs from the default operation,
              as it never writes to the filename which is included in the file
              and  it  rejects  files which don't begin with an encrypted mes-
              sage.

       --verify
              Assume that the first argument is a signed file  or  a  detached
              signature  and  verify it without generating any output. With no
              arguments, the signature packet is read from STDIN.  If  only  a
              sigfile  is  given, it may be a complete signature or a detached
              signature, in which case the signed stuff is expected in a  file
              without  the ".sig" or ".asc" extension.  With more than 1 argu-
              ment, the first should be a detached signature and the remaining
              files are the signed stuff. To read the signed stuff from STDIN,
              use '-' as the second filename.  For security reasons a detached
              signature  cannot  read  the  signed material from STDIN without
              denoting it in the above way.
              Note: When verifying a cleartext signature,  gpg  verifies  only
              what  makes  up the cleartext signed data and not any extra data
              outside of the cleartext signature  or  header  lines  following
              directly  the dash marker line.  The option --output may be used
              to write out the actual signed data; but there  are  other  pit-
              falls with this format as well.  It is suggested to avoid clear-
              text signatures in favor of detached signatures.

       --multifile
              This modifies certain other commands to  accept  multiple  files
              for  processing on the command line or read from STDIN with each
              filename on a separate line. This allows for many  files  to  be
              processed  at once. --multifile may currently be used along with
              --verify, --encrypt, and --decrypt. Note that --multifile --ver-
              ify may not be used with detached signatures.

       --verify-files
              Identical to --multifile --verify.

       --encrypt-files
              Identical to --multifile --encrypt.

       --decrypt-files
              Identical to --multifile --decrypt.

       --list-keys
       -k
       --list-public-keys
              List  all  keys from the public keyrings, or just the keys given
              on the command line.
              Avoid using the output of this command in scripts or other  pro-
              grams  as  it  is likely to change as GnuPG changes. See --with-
              colons for a  machine-parseable  key  listing  command  that  is
              appropriate for use in scripts and other programs.

       --list-secret-keys
       -K     List  all  keys from the secret keyrings, or just the ones given
              on the command line. A # after the letters sec  means  that  the
              secret  key  is  not  usable (for example, if it was created via
              --export-secret-subkeys).

       --list-sigs
              Same as --list-keys, but the signatures are  listed  too.   This
              command  has  the  same effect as using --list-keys with --with-
              sig-list.
              For each signature listed, there are several  flags  in  between
              the "sig" tag and keyid. These flags give additional information
              about each signature. From left to right, they are  the  numbers
              1-3  for certificate check level (see --ask-cert-level), "L" for
              a local or non-exportable signature (see --lsign-key), "R" for a
              nonRevocable  signature  (see  the --edit-key command "nrsign"),
              "P" for a signature that contains a policy URL (see  --cert-pol-
              icy-url),  "N"  for  a  signature  that contains a notation (see
              --cert-notation), "X" for an eXpired signature (see  --ask-cert-
              expire), and the numbers 1-9 or "T" for 10 and above to indicate
              trust signature levels (see the --edit-key command "tsign").

       --check-sigs
              Same as --list-sigs, but the signatures are verified.  Note that
              for  performance  reasons the revocation status of a signing key
              is not shown.  This command has the same effect as using --list-
              keys with --with-sig-check.
              The  status  of the verification is indicated by a flag directly
              following the "sig" tag (and thus  before  the  flags  described
              above  for --list-sigs).  A "!" indicates that the signature has
              been successfully verified, a "-" denotes a bad signature and  a
              "%"  is  used  if an error occurred while checking the signature
              (e.g. a non supported algorithm).

       --locate-keys
              Locate the keys given as arguments.  This command basically uses
              the  same algorithm as used when locating keys for encryption or
              signing and may thus be used to see what keys  gpg2  might  use.
              In  particular  external methods as defined by --auto-key-locate
              may be used to locate a key.  Only public keys are listed.

       --fingerprint
              List all keys (or the specified ones) along with  their  finger-
              prints.  This  is  the  same  output as --list-keys but with the
              additional output of a line with the fingerprint.  May  also  be
              combined  with  --list-sigs or --check-sigs.  If this command is
              given twice, the fingerprints of all secondary keys  are  listed
              too.

       --list-packets
              List  only  the  sequence  of packets. This is mainly useful for
              debugging.

       --card-edit
              Present a menu to work with a smartcard. The  subcommand  "help"
              provides  an  overview  on  available  commands.  For a detailed
              description,    please     see     the     Card     HOWTO     at
              http://www.gnupg.org/documentation/howtos.html#GnuPG-cardHOWTO .

       --card-status
              Show the content of the smart card.

       --change-pin
              Present  a  menu  to allow changing the PIN of a smartcard. This
              functionality is also available as the subcommand "passwd"  with
              the --card-edit command.

       --delete-key name
              Remove  key  from the public keyring. In batch mode either --yes
              is required or the key must be specified by fingerprint. This is
              a safeguard against accidental deletion of multiple keys.

       --delete-secret-key name
              Remove  key  from the secret keyring. In batch mode the key must
              be specified by fingerprint.

       --delete-secret-and-public-key name
              Same as --delete-key, but if a secret key  exists,  it  will  be
              removed  first.  In batch mode the key must be specified by fin-
              gerprint.

       --export
              Either export all keys from all keyrings (default  keyrings  and
              those  registered via option --keyring), or if at least one name
              is given, those of the given name. The new keyring is written to
              STDOUT  or  to the file given with option --output. Use together
              with --armor to mail those keys.

       --send-keys key IDs
              Similar to --export but sends the keys to a keyserver.   Finger-
              prints  may  be used instead of key IDs. Option --keyserver must
              be used to give the name of this keyserver. Don't send your com-
              plete  keyring  to  a keyserver --- select only those keys which
              are new or changed by you.  If no key IDs are  given,  gpg  does
              nothing.

       --export-secret-keys
       --export-secret-subkeys
              Same  as --export, but exports the secret keys instead.  This is
              normally not very useful and a security risk.  The  second  form
              of  the  command  has  the special property to render the secret
              part of the primary key useless; this  is  a  GNU  extension  to
              OpenPGP  and  other  implementations can not be expected to suc-
              cessfully import such a key.  See the option  --simple-sk-check-
              sum  if  you  want  to import such an exported key with an older
              OpenPGP implementation.

       --import
       --fast-import
              Import/merge keys. This adds the given keys to the keyring.  The
              fast version is currently just a synonym.
              There  are  a  few  other options which control how this command
              works.  Most notable here  is  the  --import-options  merge-only
              option  which does not insert new keys but does only the merging
              of new signatures, user-IDs and subkeys.

       --recv-keys key IDs
              Import the keys with the given key IDs from a keyserver.  Option
              --keyserver must be used to give the name of this keyserver.

       --refresh-keys
              Request  updates from a keyserver for keys that already exist on
              the local keyring. This is useful for updating a  key  with  the
              latest signatures, user IDs, etc. Calling this with no arguments
              will refresh the entire keyring. Option --keyserver must be used
              to  give the name of the keyserver for all keys that do not have
              preferred keyservers  set  (see  --keyserver-options  honor-key-
              server-url).

       --search-keys names
              Search  the  keyserver for the given names. Multiple names given
              here will be joined together to create the search string for the
              keyserver.   Option --keyserver must be used to give the name of
              this keyserver.  Keyservers that support different search  meth-
              ods  allow  using the syntax specified in "How to specify a user
              ID" below. Note that different keyserver types support different
              search methods. Currently only LDAP supports them all.

       --fetch-keys URIs
              Retrieve keys located at the specified URIs. Note that different
              installations of GnuPG may support  different  protocols  (HTTP,
              FTP, LDAP, etc.)

       --update-trustdb
              Do  trust  database  maintenance. This command iterates over all
              keys and builds the Web of Trust. This is an interactive command
              because it may have to ask for the "ownertrust" values for keys.
              The user has to give an estimation of how  far  she  trusts  the
              owner  of  the  displayed  key to correctly certify (sign) other
              keys. GnuPG only asks for the ownertrust value if it has not yet
              been  assigned to a key. Using the --edit-key menu, the assigned
              value can be changed at any time.

       --check-trustdb
              Do trust database maintenance  without  user  interaction.  From
              time  to time the trust database must be updated so that expired
              keys or signatures and the resulting changes in the Web of Trust
              can  be  tracked.  Normally,  GnuPG  will calculate when this is
              required and do it automatically unless  --no-auto-check-trustdb
              is set. This command can be used to force a trust database check
              at any time. The processing is identical to  that  of  --update-
              trustdb but it skips keys with a not yet defined "ownertrust".
              For  use  with cron jobs, this command can be used together with
              --batch in which case the trust database check is done only if a
              check  is  needed.  To  force  a  run even in batch mode add the
              option --yes.

       --export-ownertrust
              Send the ownertrust values to STDOUT. This is useful for  backup
              purposes  as  these  values are the only ones which can't be re-
              created from a corrupted trustdb.  Example:
                  gpg2 --export-ownertrust > otrust.txt

       --import-ownertrust
              Update the trustdb with the ownertrust values  stored  in  files
              (or  STDIN  if  not given); existing values will be overwritten.
              In case of a severely damaged trustdb and if you have  a  recent
              backup  of the ownertrust values (e.g. in the file `otrust.txt',
              you may re-create the trustdb using these commands:
                  cd ~/.gnupg
                  rm trustdb.gpg
                  gpg2 --import-ownertrust < otrust.txt

       --rebuild-keydb-caches
              When updating from version 1.0.6 to 1.0.7 this command should be
              used  to  create  signature  caches  in the keyring. It might be
              handy in other situations too.

       --print-md algo
       --print-mds
              Print message digest of algorithm ALGO for all  given  files  or
              STDIN.   With  the  second  form  (or  a deprecated "*" as algo)
              digests for all available algorithms are printed.

       --gen-random 0|1|2 count
              Emit count random bytes of the given quality level 0, 1 or 2. If
              count  is not given or zero, an endless sequence of random bytes
              will be emitted.  If used with --armor the output will be base64
              encoded.   PLEASE,  don't  use this command unless you know what
              you are doing; it may remove precious entropy from the system!

       --gen-prime mode bits
              Use the source, Luke :-). The output format is still subject  to
              change.

       --enarmor
       --dearmor
              Pack  or  unpack  an  arbitrary input into/from an OpenPGP ASCII
              armor.  This is a GnuPG extension to OpenPGP and in general  not
              very useful.


   How to manage your keys

       This section explains the main commands for key management

       --gen-key
              Generate  a  new  key  pair.  This command is normally only used
              interactively.
              There is an experimental feature which allows you to create keys
              in  batch mode. See the file `doc/DETAILS' in the source distri-
              bution on how to use this.

       --gen-revoke name
              Generate a revocation  certificate  for  the  complete  key.  To
              revoke a subkey or a signature, use the --edit command.

       --desig-revoke name
              Generate  a  designated  revocation  certificate for a key. This
              allows a user (with the permission of the keyholder)  to  revoke
              someone else's key.

       --edit-key
              Present  a  menu which enables you to do most of the key manage-
              ment related tasks.  It expects the specification of  a  key  on
              the command line.

              uid n  Toggle  selection of user ID or photographic user ID with
                     index n.  Use * to select all and 0 to deselect all.

              key n  Toggle selection of subkey with index n.  Use * to select
                     all and 0 to deselect all.

              sign   Make  a  signature  on key of user name If the key is not
                     yet signed by the default user (or the users  given  with
                     -u),  the  program  displays  the  information of the key
                     again, together with its fingerprint and asks whether  it
                     should be signed. This question is repeated for all users
                     specified with -u.

              lsign  Same as "sign"  but  the  signature  is  marked  as  non-
                     exportable  and  will  therefore never be used by others.
                     This may be used to make keys valid  only  in  the  local
                     environment.

              nrsign Same as "sign" but the signature is marked as non-revoca-
                     ble and can therefore never be revoked.

              tsign  Make a trust signature. This is a signature that combines
                     the  notions of certification (like a regular signature),
                     and trust (like the "trust"  command).  It  is  generally
                     only useful in distinct communities or groups.
              Note  that "l" (for local / non-exportable), "nr" (for non-revo-
              cable, and "t" (for trust) may be freely mixed and  prefixed  to
              "sign" to create a signature of any type desired.

              delsig Delete  a  signature.  Note  that  it  is not possible to
                     retract a signature, once it has been send to the  public
                     (i.e.  to  a  keyserver).   In  that  case you better use
                     revsig.

              revsig Revoke a signature. For every signature  which  has  been
                     generated by one of the secret keys, GnuPG asks whether a
                     revocation certificate should be generated.

              check  Check the signatures on all selected user IDs.

              adduid Create an additional user ID.

              addphoto
                     Create a photographic user ID. This  will  prompt  for  a
                     JPEG  file  that  will be embedded into the user ID. Note
                     that a very large JPEG will make for a  very  large  key.
                     Also  note  that  some  programs  will  display your JPEG
                     unchanged (GnuPG), and some programs will scale it to fit
                     in a dialog box (PGP).

              showphoto
                     Display the selected photographic user ID.

              deluid Delete  a  user ID or photographic user ID.  Note that it
                     is not possible to retract a user id, once  it  has  been
                     send  to  the public (i.e. to a keyserver).  In that case
                     you better use revuid.

              revuid Revoke a user ID or photographic user ID.

              primary
                     Flag the current user id as the primary one, removes  the
                     primary user id flag from all other user ids and sets the
                     timestamp of  all  affected  self-signatures  one  second
                     ahead. Note that setting a photo user ID as primary makes
                     it primary over other photo user IDs, and setting a regu-
                     lar  user ID as primary makes it primary over other regu-
                     lar user IDs.

              keyserver
                     Set a preferred keyserver for the specified  user  ID(s).
                     This allows other users to know where you prefer they get
                     your key from. See  --keyserver-options  honor-keyserver-
                     url  for  more  on  how  this  works.  Setting a value of
                     "none" removes an existing preferred keyserver.

              notation
                     Set a name=value notation for the specified  user  ID(s).
                     See --cert-notation for more on how this works. Setting a
                     value of "none" removes all notations, setting a notation
                     prefixed with a minus sign (-) removes that notation, and
                     setting a notation name  (without  the  =value)  prefixed
                     with a minus sign removes all notations with that name.

              pref   List  preferences  from  the selected user ID. This shows
                     the actual preferences,  without  including  any  implied
                     preferences.

              showpref
                     More  verbose  preferences  listing for the selected user
                     ID. This shows the preferences in effect by including the
                     implied preferences of 3DES (cipher), SHA-1 (digest), and
                     Uncompressed  (compression)  if  they  are  not   already
                     included  in  the  preference list. In addition, the pre-
                     ferred keyserver and signature  notations  (if  any)  are
                     shown.

              setpref string
                     Set the list of user ID preferences to string for all (or
                     just the selected) user  IDs.  Calling  setpref  with  no
                     arguments sets the preference list to the default (either
                     built-in or set via --default-preference-list), and call-
                     ing  setpref  with  "none"  as the argument sets an empty
                     preference list. Use gpg2 --version  to  get  a  list  of
                     available  algorithms. Note that while you can change the
                     preferences on an attribute user  ID  (aka  "photo  ID"),
                     GnuPG  does  not  select  keys  via attribute user IDs so
                     these preferences will not be used by GnuPG.
                     When setting preferences, you should list the  algorithms
                     in the order which you'd like to see them used by someone
                     else when encrypting a message to your key.  If you don't
                     include  3DES, it will be automatically added at the end.
                     Note that there are many factors that go into choosing an
                     algorithm  (for  example,  your  key  may not be the only
                     recipient), and so the remote OpenPGP  application  being
                     used to send to you may or may not follow your exact cho-
                     sen order for a given message.  It  will,  however,  only
                     choose  an  algorithm  that  is present on the preference
                     list of every recipient key.  See also the INTEROPERABIL-
                     ITY WITH OTHER OPENPGP PROGRAMS section below.

              addkey Add a subkey to this key.

              addcardkey
                     Generate a subkey on a card and add it to this key.

              keytocard
                     Transfer  the  selected secret subkey (or the primary key
                     if no subkey has  been  selected)  to  a  smartcard.  The
                     secret  key  in the keyring will be replaced by a stub if
                     the key could be stored successfully on the card and  you
                     use the save command later. Only certain key types may be
                     transferred to the card. A sub menu allows you to  select
                     on what card to store the key. Note that it is not possi-
                     ble to get that key back from the card - if the card gets
                     broken  your  secret  key  will be lost unless you have a
                     backup somewhere.

              bkuptocard file
                     Restore the given file to a card.  This  command  may  be
                     used  to  restore  a backup key (as generated during card
                     initialization) to a new card. In almost all  cases  this
                     will  be  the encryption key. You should use this command
                     only with the corresponding public key and make sure that
                     the  file  given  as  argument  is  indeed  the backup to
                     restore. You should then select 2 to restore  as  encryp-
                     tion   key.   You  will  first  be  asked  to  enter  the
                     passphrase of the backup key and then for the  Admin  PIN
                     of the card.

              delkey Remove a subkey (secondart key). Note that it is not pos-
                     sible to retract a subkey, once it has been send  to  the
                     public  (i.e.  to  a keyserver).  In that case you better
                     use revkey.

              revkey Revoke a subkey.

              expire Change the key or subkey expiration time. If a subkey  is
                     selected,  the  expiration  time  of  this subkey will be
                     changed. With no selection, the  key  expiration  of  the
                     primary key is changed.

              trust  Change  the  owner  trust value for the key. This updates
                     the trust-db immediately and no save is required.

              disable
              enable Disable or enable an entire key. A disabled key  can  not
                     normally be used for encryption.

              addrevoker
                     Add  a  designated  revoker  to  the  key. This takes one
                     optional argument: "sensitive". If a  designated  revoker
                     is  marked  as  sensitive,  it  will  not  be exported by
                     default (see export-options).

              passwd Change the passphrase of the secret key.

              toggle Toggle between public and secret key listing.

              clean  Compact (by removing all signatures except  the  selfsig)
                     any  user  ID  that is no longer usable (e.g. revoked, or
                     expired). Then, remove any signatures that are not usable
                     by  the  trust  calculations.  Specifically, this removes
                     any signature that does not validate, any signature  that
                     is  superseded  by a later signature, revoked signatures,
                     and signatures issued by keys that are not present on the
                     keyring.

              minimize
                     Make  the key as small as possible. This removes all sig-
                     natures from each user ID  except  for  the  most  recent
                     self-signature.

              cross-certify
                     Add  cross-certification  signatures  to  signing subkeys
                     that may not  currently  have  them.  Cross-certification
                     signatures  protect against a subtle attack against sign-
                     ing subkeys. See --require-cross-certification.  All  new
                     keys  generated  have  this signature by default, so this
                     option is only useful to bring older keys up to date.

              save   Save all changes to the key rings and quit.

              quit   Quit the program without updating the key rings.
              The listing shows you the key with its secondary  keys  and  all
              user  ids.   The  primary  user  id  is  indicated by a dot, and
              selected keys or user ids are indicated  by  an  asterisk.   The
              trust  value is displayed with the primary key: the first is the
              assigned owner trust and the  second  is  the  calculated  trust
              value. Letters are used for the values:

              -      No ownertrust assigned / not yet calculated.

              e      Trust  calculation has failed; probably due to an expired
                     key.

              q      Not enough information for calculation.

              n      Never trust this key.

              m      Marginally trusted.

              f      Fully trusted.

              u      Ultimately trusted.

       --sign-key name
              Signs a public key with your secret key. This is a shortcut ver-
              sion of the subcommand "sign" from --edit.

       --lsign-key name
              Signs  a  public  key  with your secret key but marks it as non-
              exportable. This is a shortcut version of the subcommand "lsign"
              from --edit-key.

       --passwd user_id
              Change  the  passphrase  of the secret key belonging to the cer-
              tificate specified as user_id.  This is a shortcut for the  sub-
              command passwd of the edit key menu.


OPTIONS
       gpg2  features a bunch of options to control the exact behaviour and to
       change the default configuration.

       Long   options   can   be   put   in   an   options    file    (default
       "~/.gnupg/gpg.conf").  Short  option names will not work - for example,
       "armor" is a valid option for the options file, while "a"  is  not.  Do
       not  write  the  2  dashes,  but  simply the name of the option and any
       required arguments. Lines with a hash ('#')  as  the  first  non-white-
       space  character are ignored. Commands may be put in this file too, but
       that is not generally useful as the command will execute  automatically
       with every execution of gpg.
       Please  remember  that  option parsing stops as soon as a non-option is
       encountered, you can explicitly  stop  parsing  by  using  the  special
       option --.

   How to change the configuration

       These  options  are  used  to  change the configuration and are usually
       found in the option file.

       --default-key name
              Use name as the default key to sign with. If this option is  not
              used,  the  default  key  is  the  first key found in the secret
              keyring.  Note that -u or --local-user overrides this option.

       --default-recipient name
              Use name as default recipient if option --recipient is not  used
              and don't ask if this is a valid one. name must be non-empty.

       --default-recipient-self
              Use  the  default key as default recipient if option --recipient
              is not used and don't ask if this is a valid  one.  The  default
              key is the first one from the secret keyring or the one set with
              --default-key.

       --no-default-recipient
              Reset --default-recipient and --default-recipient-self.

       -v, --verbose
              Give more information during  processing.  If  used  twice,  the
              input data is listed in detail.

       --no-verbose
              Reset verbose level to 0.

       -q, --quiet
              Try to be as quiet as possible.

       --batch
       --no-batch
              Use  batch  mode.  Never ask, do not allow interactive commands.
              --no-batch disables this option.  Note that even with a filename
              given  on  the  command  line, gpg might still need to read from
              STDIN (in particular if gpg figures that the input is a detached
              signature  and no data file has been specified).  Thus if you do
              not want to feed data via STDIN, you  should  connect  STDIN  to
              `/dev/null'.

       --no-tty
              Make  sure that the TTY (terminal) is never used for any output.
              This option is needed in  some  cases  because  GnuPG  sometimes
              prints warnings to the TTY even if --batch is used.

       --yes  Assume "yes" on most questions.

       --no   Assume "no" on most questions.

       --list-options parameters
              This  is  a  space  or comma delimited string that gives options
              used when listing keys and  signatures  (that  is,  --list-keys,
              --list-sigs,  --list-public-keys,  --list-secret-keys,  and  the
              --edit-key functions).  Options can  be  prepended  with  a  no-
              (after  the  two  dashes)  to  give  the  opposite meaning.  The
              options are:

              show-photos
                     Causes --list-keys, --list-sigs, --list-public-keys,  and
                     --list-secret-keys  to  display any photo IDs attached to
                     the key.  Defaults to no. See also --photo-viewer.   Does
                     not  work  with --with-colons: see --attribute-fd for the
                     appropriate way to get photo data for scripts  and  other
                     frontends.

              show-policy-urls
                     Show policy URLs in the --list-sigs or --check-sigs list-
                     ings.  Defaults to no.

              show-notations
              show-std-notations
              show-user-notations
                     Show all, IETF standard, or user-defined signature  nota-
                     tions   in  the  --list-sigs  or  --check-sigs  listings.
                     Defaults to no.

              show-keyserver-urls
                     Show any preferred keyserver URL in  the  --list-sigs  or
                     --check-sigs listings. Defaults to no.

              show-uid-validity
                     Display  the  calculated  validity of user IDs during key
                     listings.  Defaults to no.

              show-unusable-uids
                     Show revoked  and  expired  user  IDs  in  key  listings.
                     Defaults to no.

              show-unusable-subkeys
                     Show   revoked  and  expired  subkeys  in  key  listings.
                     Defaults to no.

              show-keyring
                     Display the keyring name at the head of key  listings  to
                     show  which  keyring  a given key resides on. Defaults to
                     no.

              show-sig-expire
                     Show signature expiration dates (if any)  during  --list-
                     sigs or --check-sigs listings. Defaults to no.

              show-sig-subpackets
                     Include  signature  subpackets  in  the key listing. This
                     option can take an optional argument list of the subpack-
                     ets  to list. If no argument is passed, list all subpack-
                     ets. Defaults to no. This option is only meaningful  when
                     using  --with-colons  along  with --list-sigs or --check-
                     sigs.

       --verify-options parameters
              This is a space or comma delimited  string  that  gives  options
              used  when verifying signatures. Options can be prepended with a
              `no-' to give the opposite meaning. The options are:

              show-photos
                     Display any photo IDs present on the key that issued  the
                     signature.  Defaults to no. See also --photo-viewer.

              show-policy-urls
                     Show   policy  URLs  in  the  signature  being  verified.
                     Defaults to no.

              show-notations
              show-std-notations
              show-user-notations
                     Show all, IETF standard, or user-defined signature  nota-
                     tions  in  the signature being verified. Defaults to IETF
                     standard.

              show-keyserver-urls
                     Show any preferred keyserver URL in the  signature  being
                     verified.  Defaults to no.

              show-uid-validity
                     Display  the  calculated  validity of the user IDs on the
                     key that issued the signature. Defaults to no.

              show-unusable-uids
                     Show revoked and expired user IDs during signature  veri-
                     fication.  Defaults to no.

              show-primary-uid-only
                     Show  only the primary user ID during signature verifica-
                     tion.  That is all the AKA lines as well as photo Ids are
                     not shown with the signature verification status.

              pka-lookups
                     Enable  PKA lookups to verify sender addresses. Note that
                     PKA is based on DNS, and so enabling this option may dis-
                     close  information  on when and what signatures are veri-
                     fied or to whom data is encrypted. This is similar to the
                     "web bug" described for the auto-key-retrieve feature.

              pka-trust-increase
                     Raise  the  trust in a signature to full if the signature
                     passes PKA validation. This option is only meaningful  if
                     pka-lookups is set.

       --enable-dsa2
       --disable-dsa2
              Enable hash truncation for all DSA keys even for old DSA Keys up
              to 1024 bit.  This is also the  default  with  --openpgp.   Note
              that  older  versions  of GnuPG also required this flag to allow
              the generation of DSA larger than 1024 bit.

       --photo-viewer string
              This is the command line that should be run to view a photo  ID.
              "%i"  will  be expanded to a filename containing the photo. "%I"
              does the same, except the file will  not  be  deleted  once  the
              viewer exits.  Other flags are "%k" for the key ID, "%K" for the
              long key ID, "%f" for the key fingerprint, "%t" for  the  exten-
              sion  of  the image type (e.g. "jpg"), "%T" for the MIME type of
              the image (e.g. "image/jpeg"),  "%v"  for  the  single-character
              calculated  validity  of the image being viewed (e.g. "f"), "%V"
              for the calculated validity as a string (e.g.  "full"), and "%%"
              for  an  actual  percent  sign. If neither %i or %I are present,
              then the photo will be supplied to the viewer on standard input.
              The default viewer is "xloadimage  -fork  -quiet  -title  'KeyID
              0x%k'  STDIN".  Note  that  if  your image viewer program is not
              secure, then executing it from GnuPG does not make it secure.

       --exec-path string
              Sets a list of directories to search for photo viewers and  key-
              server  helpers. If not provided, keyserver helpers use the com-
              piled-in default directory, and  photo  viewers  use  the  $PATH
              environment  variable.   Note,  that on W32 system this value is
              ignored when searching for keyserver helpers.

       --keyring file
              Add file to the current list of keyrings. If file begins with  a
              tilde and a slash, these are replaced by the $HOME directory. If
              the filename does not contain a slash, it is assumed  to  be  in
              the  GnuPG home directory ("~/.gnupg" if --homedir or $GNUPGHOME
              is not used).
              Note that this adds a keyring to the current list. If the intent
              is  to use the specified keyring alone, use --keyring along with
              --no-default-keyring.

       --secret-keyring file
              Same as --keyring but for the secret keyrings.

       --primary-keyring file
              Designate file as the primary public keyring.  This  means  that
              newly imported keys (via --import or keyserver --recv-from) will
              go to this keyring.

       --trustdb-name file
              Use file instead of the default trustdb. If file begins  with  a
              tilde and a slash, these are replaced by the $HOME directory. If
              the filename does not contain a slash, it is assumed  to  be  in
              the  GnuPG home directory (`~/.gnupg' if --homedir or $GNUPGHOME
              is not used).

       --homedir dir
              Set the name of the home directory to dir. If this option is not
              used,  the  home  directory  defaults to `~/.gnupg'.  It is only
              recognized when given on the command line.   It  also  overrides
              any  home  directory  stated  through  the  environment variable
              `GNUPGHOME' or (on W32 systems) by means of the  Registry  entry
              HKCU\Software\GNU\GnuPG:HomeDir.



       --display-charset name
              Set  the  name of the native character set. This is used to con-
              vert some informational strings like  user  IDs  to  the  proper
              UTF-8 encoding.  Note that this has nothing to do with the char-
              acter set of data to be encrypted  or  signed;  GnuPG  does  not
              recode  user-supplied  data.  If  this  option  is not used, the
              default character set is determined from the current  locale.  A
              verbosity  level  of  3  shows the chosen set.  Valid values for
              name are:

              iso-8859-1
                     This is the Latin 1 set.

              iso-8859-2
                     The Latin 2 set.

              iso-8859-15
                     This is currently an alias for the Latin 1 set.

              koi8-r The usual Russian set (rfc1489).

              utf-8  Bypass all translations  and  assume  that  the  OS  uses
                     native UTF-8 encoding.

       --utf8-strings
       --no-utf8-strings
              Assume  that  command  line arguments are given as UTF8 strings.
              The default (--no-utf8-strings) is to assume that arguments  are
              encoded  in the character set as specified by --display-charset.
              These options affect all following arguments. Both  options  may
              be used multiple times.

       --options file
              Read  options  from  file  and  do not try to read them from the
              default options file in the homedir (see --homedir). This option
              is ignored if used in an options file.

       --no-options
              Shortcut for --options /dev/null. This option is detected before
              an attempt to open an option file.  Using this option will  also
              prevent the creation of a `~/.gnupg' homedir.

       -z n
       --compress-level n
       --bzip2-compress-level n
              Set  compression  level  to  n  for the ZIP and ZLIB compression
              algorithms. The default is to use the default compression  level
              of  zlib  (normally 6). --bzip2-compress-level sets the compres-
              sion level for the BZIP2 compression algorithm (defaulting to  6
              as well). This is a different option from --compress-level since
              BZIP2 uses a significant amount of memory  for  each  additional
              compression  level.   -z  sets both. A value of 0 for n disables
              compression.

       --bzip2-decompress-lowmem
              Use a different decompression method for BZIP2 compressed files.
              This  alternate method uses a bit more than half the memory, but
              also runs at half the speed. This is useful  under  extreme  low
              memory  circumstances when the file was originally compressed at
              a high --bzip2-compress-level.

       --mangle-dos-filenames
       --no-mangle-dos-filenames
              Older version of Windows cannot handle filenames with more  than
              one  dot. --mangle-dos-filenames causes GnuPG to replace (rather
              than add to) the extension of an output filename to  avoid  this
              problem. This option is off by default and has no effect on non-
              Windows platforms.

       --ask-cert-level
       --no-ask-cert-level
              When making a key signature, prompt for a  certification  level.
              If this option is not specified, the certification level used is
              set  via  --default-cert-level.  See  --default-cert-level   for
              information  on the specific levels and how they are used. --no-
              ask-cert-level disables this option. This option defaults to no.

       --default-cert-level n
              The default to use for the check level when signing a key.
              0 means you make no particular claim as  to  how  carefully  you
              verified the key.
              1 means you believe the key is owned by the person who claims to
              own it but you could not, or did not verify the key at all. This
              is  useful  for a "persona" verification, where you sign the key
              of a pseudonymous user.
              2 means you did casual verification of  the  key.  For  example,
              this  could  mean  that  you  verified  the  key fingerprint and
              checked the user ID on the key against a photo ID.
              3 means you did extensive verification of the key. For  example,
              this  could  mean that you verified the key fingerprint with the
              owner of the key in person, and that you checked, by means of  a
              hard to forge document with a photo ID (such as a passport) that
              the name of the key owner matches the name in the user ID on the
              key,  and  finally that you verified (by exchange of email) that
              the email address on the key belongs to the key owner.
              Note that the examples given above for levels 2 and 3  are  just
              that:  examples. In the end, it is up to you to decide just what
              "casual" and "extensive" mean to you.
              This option defaults to 0 (no particular claim).

       --min-cert-level
              When building the trust database, treat any  signatures  with  a
              certification  level below this as invalid. Defaults to 2, which
              disregards level 1 signatures. Note that level 0 "no  particular
              claim" signatures are always accepted.

       --trusted-key long key ID
              Assume  that  the specified key (which must be given as a full 8
              byte key ID) is as trustworthy as one of your own  secret  keys.
              This option is useful if you don't want to keep your secret keys
              (or one of them) online but still want to be able to  check  the
              validity of a given recipient's or signator's key.

       --trust-model pgp|classic|direct|always|auto
              Set what trust model GnuPG should follow. The models are:

              pgp    This  is  the Web of Trust combined with trust signatures
                     as used in PGP 5.x and later. This is the  default  trust
                     model when creating a new trust database.

              classic
                     This  is the standard Web of Trust as used in PGP 2.x and
                     earlier.

              direct Key validity is set directly by the user and  not  calcu-
                     lated via the Web of Trust.

              always Skip  key validation and assume that used keys are always
                     fully trusted. You generally won't use  this  unless  you
                     are  using  some  external validation scheme. This option
                     also suppresses the "[uncertain]" tag printed with signa-
                     ture checks when there is no evidence that the user ID is
                     bound to the key.

              auto   Select the trust model depending on whatever the internal
                     trust  database says. This is the default model if such a
                     database already exists.

       --auto-key-locate parameters
       --no-auto-key-locate
              GnuPG can automatically locate and retrieve keys as needed using
              this  option.  This  happens when encrypting to an email address
              (in the "user AT example.com" form), and there  are  no  user@exam-
              ple.com keys on the local keyring.  This option takes any number
              of the following mechanisms, in the order they are to be tried:

              cert   Locate a key using DNS CERT, as specified in rfc4398.

              pka    Locate a key using DNS PKA.

              ldap   Using DNS Service Discovery, check the domain in question
                     for  any  LDAP keyservers to use.  If this fails, attempt
                     to locate the key  using  the  PGP  Universal  method  of
                     checking 'ldap://keys.(thedomain)'.

              keyserver
                     Locate  a  key  using whatever keyserver is defined using
                     the --keyserver option.

              keyserver-URL
                     In addition, a keyserver URL as used in  the  --keyserver
                     option  may  be  used  here to query that particular key-
                     server.

              local  Locate the key using the local keyrings.  This  mechanism
                     allows  to  select  the order a local key lookup is done.
                     Thus using  '--auto-key-locate  local'  is  identical  to
                     --no-auto-key-locate.

              nodefault
                     This  flag  disables  the standard local key lookup, done
                     before any of the mechanisms defined by  the  --auto-key-
                     locate  are tried.  The position of this mechanism in the
                     list does not matter.  It is not  required  if  local  is
                     also used.

       --keyid-format short|0xshort|long|0xlong
              Select  how  to  display  key  IDs.  "short"  is the traditional
              8-character key ID. "long" is the more accurate (but less conve-
              nient)  16-character key ID. Add an "0x" to either to include an
              "0x" at the beginning of the key ID,  as  in  0x99242560.   Note
              that this option is ignored if the option --with-colons is used.

       --keyserver name
              Use name as your keyserver. This is the server that --recv-keys,
              --send-keys, and --search-keys will communicate with to  receive
              keys  from,  send keys to, and search for keys on. The format of
              the name is a URI: `scheme:[//]keyservername[:port]' The  scheme
              is  the  type  of  keyserver: "hkp" for the HTTP (or compatible)
              keyservers, "ldap" for the LDAP keyservers, or "mailto" for  the
              Graff email keyserver. Note that your particular installation of
              GnuPG may have other keyserver types  available  as  well.  Key-
              server  schemes  are case-insensitive. After the keyserver name,
              optional keyserver configuration options may be provided.  These
              are  the  same as the global --keyserver-options from below, but
              apply only to this particular keyserver.
              Most keyservers synchronize with each other, so there is  gener-
              ally no need to send keys to more than one server. The keyserver
              hkp://keys.gnupg.net uses round robin DNS to  give  a  different
              keyserver each time you use it.

       --keyserver-options name=value1
              This is a space or comma delimited string that gives options for
              the keyserver. Options can be prefixed with a `no-' to give  the
              opposite  meaning. Valid import-options or export-options may be
              used here as well to apply to importing (--recv-key) or  export-
              ing  (--send-key)  a key from a keyserver. While not all options
              are available for all keyserver types, some common options are:

              include-revoked
                     When searching for a key with --search-keys, include keys
                     that  are  marked  on the keyserver as revoked. Note that
                     not all  keyservers  differentiate  between  revoked  and
                     unrevoked  keys,  and  for such keyservers this option is
                     meaningless. Note also that most keyservers do  not  have
                     cryptographic  verification  of  key  revocations, and so
                     turning this option off may result in skipping keys  that
                     are incorrectly marked as revoked.

              include-disabled
                     When searching for a key with --search-keys, include keys
                     that are marked on the keyserver as disabled.  Note  that
                     this option is not used with HKP keyservers.

              auto-key-retrieve
                     This option enables the automatic retrieving of keys from
                     a keyserver when verifying signatures made by  keys  that
                     are not on the local keyring.
                     Note  that  this  option  makes a "web bug" like behavior
                     possible.  Keyserver operators can  see  which  keys  you
                     request,  so  by  sending you a message signed by a brand
                     new key (which you naturally will not have on your  local
                     keyring),  the operator can tell both your IP address and
                     the time when you verified the signature.

              honor-keyserver-url
                     When using --refresh-keys, if the key in question  has  a
                     preferred  keyserver  URL,  then  use that preferred key-
                     server to refresh the key from. In addition, if auto-key-
                     retrieve  is  set, and the signature being verified has a
                     preferred keyserver URL, then  use  that  preferred  key-
                     server to fetch the key from. Defaults to yes.

              honor-pka-record
                     If auto-key-retrieve is set, and the signature being ver-
                     ified has a PKA record, then use the PKA  information  to
                     fetch the key. Defaults to yes.

              include-subkeys
                     When  receiving  a key, include subkeys as potential tar-
                     gets. Note that this option is not  used  with  HKP  key-
                     servers, as they do not support retrieving keys by subkey
                     id.

              use-temp-files
                     On most Unix-like platforms, GnuPG communicates with  the
                     keyserver  helper  program  via  pipes, which is the most
                     efficient method. This option forces GnuPG to use  tempo-
                     rary  files  to  communicate.  On some platforms (such as
                     Win32 and RISC OS), this option is always enabled.

              keep-temp-files
                     If using `use-temp-files', do not delete the  temp  files
                     after using them. This option is useful to learn the key-
                     server communication protocol by  reading  the  temporary
                     files.

              verbose
                     Tell  the  keyserver  helper  program to be more verbose.
                     This option can be repeated multiple  times  to  increase
                     the verbosity level.

              timeout
                     Tell  the  keyserver helper program how long (in seconds)
                     to try and perform a keyserver action before  giving  up.
                     Note  that  performing  multiple actions at the same time
                     uses this timeout value per action.   For  example,  when
                     retrieving  multiple  keys  via  --recv-keys, the timeout
                     applies separately to each key retrieval, and not to  the
                     --recv-keys command as a whole. Defaults to 30 seconds.

              http-proxy=value
                     Set  the  proxy to use for HTTP and HKP keyservers.  This
                     overrides the "http_proxy" environment variable, if any.

              max-cert-size
                     When retrieving a key via DNS CERT, only accept  keys  up
                     to this size.  Defaults to 16384 bytes.

              debug  Turn  on  debug  output  in the keyserver helper program.
                     Note that the details of debug output  depends  on  which
                     keyserver  helper  program is being used, and in turn, on
                     any libraries that  the  keyserver  helper  program  uses
                     internally (libcurl, openldap, etc).

              check-cert
                     Enable certificate checking if the keyserver presents one
                     (for hkps or ldaps).  Defaults to on.

              ca-cert-file
                     Provide  a  certificate  store  to  override  the  system
                     default.   Only  necessary  if check-cert is enabled, and
                     the keyserver is using a certificate that is not  present
                     in a system default certificate list.
                     Note that depending on the SSL library that the keyserver
                     helper is built with, this may actually be a directory or
                     a file.

       --completes-needed n
              Number of completely trusted users to introduce a new key signer
              (defaults to 1).

       --marginals-needed n
              Number of marginally trusted users to introduce a new key signer
              (defaults to 3)

       --max-cert-depth n
              Maximum depth of a certification chain (default is 5).

       --simple-sk-checksum
              Secret  keys  are integrity protected by using a SHA-1 checksum.
              This method is part of the upcoming enhanced OpenPGP  specifica-
              tion  but GnuPG already uses it as a countermeasure against cer-
              tain attacks.  Old applications don't understand this  new  for-
              mat, so this option may be used to switch back to the old behav-
              iour. Using this option bears a security risk. Note  that  using
              this option only takes effect when the secret key is encrypted -
              the simplest way to make this happen is to change the passphrase
              on the key (even changing it to the same value is acceptable).

       --no-sig-cache
              Do not cache the verification status of key signatures.  Caching
              gives a much better performance in key listings. However, if you
              suspect that your public keyring is not save against write modi-
              fications, you can use this option to disable  the  caching.  It
              probably  does  not make sense to disable it because all kind of
              damage can be done if someone else has write access to your pub-
              lic keyring.

       --no-sig-create-check
              GnuPG  normally  verifies each signature right after creation to
              protect against bugs and hardware malfunctions which could  leak
              out bits from the secret key. This extra verification needs some
              time (about 115% for DSA keys), and so this option can  be  used
              to disable it.  However, due to the fact that the signature cre-
              ation needs manual interaction, this  performance  penalty  does
              not matter in most settings.

       --auto-check-trustdb
       --no-auto-check-trustdb
              If  GnuPG  feels that its information about the Web of Trust has
              to be updated, it automatically runs the --check-trustdb command
              internally.   This  may  be a time consuming process. --no-auto-
              check-trustdb disables this option.

       --use-agent
       --no-use-agent
              This is dummy option. gpg2 always requires the agent.

       --gpg-agent-info
              This is dummy option. It has no effect when used with gpg2.

       --lock-once
              Lock the databases the first time a lock is requested and do not
              release the lock until the process terminates.

       --lock-multiple
              Release  the  locks  every  time a lock is no longer needed. Use
              this to override a previous --lock-once from a config file.

       --lock-never
              Disable locking entirely. This option should  be  used  only  in
              very special environments, where it can be assured that only one
              process is accessing those  files.  A  bootable  floppy  with  a
              stand-alone  encryption  system will probably use this. Improper
              usage of this option may lead to data and key corruption.

       --exit-on-status-write-error
              This option will cause write errors on the status FD to  immedi-
              ately  terminate the process. That should in fact be the default
              but it never worked this way and  thus  we  need  an  option  to
              enable  this,  so that the change won't break applications which
              close their end of a status fd connected pipe too  early.  Using
              this  option  along with --enable-progress-filter may be used to
              cleanly cancel long running gpg operations.

       --limit-card-insert-tries n
              With n greater than 0 the number of prompts asking to  insert  a
              smartcard  gets limited to N-1. Thus with a value of 1 gpg won't
              at all ask to insert  a  card  if  none  has  been  inserted  at
              startup. This option is useful in the configuration file in case
              an application does not know about  the  smartcard  support  and
              waits ad infinitum for an inserted card.

       --no-random-seed-file
              GnuPG uses a file to store its internal random pool over invoca-
              tions.  This makes random generation faster;  however  sometimes
              write  operations  are  not  desired. This option can be used to
              achieve that with the cost of slower random generation.

       --no-greeting
              Suppress the initial copyright message.

       --no-secmem-warning
              Suppress the warning about "using insecure memory".

       --no-permission-warning
              Suppress the  warning  about  unsafe  file  and  home  directory
              (--homedir)  permissions.  Note  that the permission checks that
              GnuPG performs are not intended to be authoritative, but  rather
              they  simply  warn  about certain common permission problems. Do
              not assume that the lack of a warning means that your system  is
              secure.
              Note that the warning for unsafe --homedir permissions cannot be
              suppressed in the gpg.conf file, as this would allow an attacker
              to  place an unsafe gpg.conf file in place, and use this file to
              suppress warnings about itself. The --homedir permissions  warn-
              ing may only be suppressed on the command line.

       --no-mdc-warning
              Suppress the warning about missing MDC integrity protection.

       --require-secmem
       --no-require-secmem
              Refuse  to run if GnuPG cannot get secure memory. Defaults to no
              (i.e. run, but give a warning).

       --require-cross-certification
       --no-require-cross-certification
              When verifying a signature made from a subkey, ensure  that  the
              cross  certification  "back  signature" on the subkey is present
              and valid.  This protects against a subtle attack  against  sub-
              keys  that  can sign.  Defaults to --require-cross-certification
              for gpg2.

       --expert
       --no-expert
              Allow the user to do certain nonsensical or "silly" things  like
              signing an expired or revoked key, or certain potentially incom-
              patible things like generating unusual key types. This also dis-
              ables  certain  warning  messages about potentially incompatible
              actions. As the name implies, this option is for  experts  only.
              If you don't fully understand the implications of what it allows
              you to do, leave this off. --no-expert disables this option.


   Key related options


       --recipient name
       -r     Encrypt for user id name. If this option  or  --hidden-recipient
              is  not  specified, GnuPG asks for the user-id unless --default-
              recipient is given.

       --hidden-recipient name
       -R     Encrypt for user ID name, but hide the key  ID  of  this  user's
              key.  This  option helps to hide the receiver of the message and
              is a limited countermeasure against traffic  analysis.  If  this
              option  or --recipient is not specified, GnuPG asks for the user
              ID unless --default-recipient is given.

       --encrypt-to name
              Same as --recipient but this one is  intended  for  use  in  the
              options  file  and  may  be  used  with  your  own user-id as an
              "encrypt-to-self". These keys are only used when there are other
              recipients  given  either  by use of --recipient or by the asked
              user id.  No trust checking is performed for these user ids  and
              even disabled keys can be used.

       --hidden-encrypt-to name
              Same  as  --hidden-recipient but this one is intended for use in
              the options file and may be used with your own user-id as a hid-
              den  "encrypt-to-self".  These keys are only used when there are
              other recipients given either by use of --recipient  or  by  the
              asked  user  id.   No trust checking is performed for these user
              ids and even disabled keys can be used.

       --no-encrypt-to
              Disable the use  of  all  --encrypt-to  and  --hidden-encrypt-to
              keys.

       --group name=value1
              Sets up a named group, which is similar to aliases in email pro-
              grams.  Any time the group name is a recipient (-r or  --recipi-
              ent),  it  will  be  expanded  to the values specified. Multiple
              groups with the same name are automatically merged into a single
              group.
              The  values are key IDs or fingerprints, but any key description
              is accepted. Note that a value with spaces in it will be treated
              as  two  different  values. Note also there is only one level of
              expansion --- you cannot make an group that  points  to  another
              group.  When  used from the command line, it may be necessary to
              quote the argument to this option  to  prevent  the  shell  from
              treating it as multiple arguments.

       --ungroup name
              Remove a given entry from the --group list.

       --no-groups
              Remove all entries from the --group list.

       --local-user name
       -u     Use  name  as  the key to sign with. Note that this option over-
              rides --default-key.

       --try-secret-key name
              For hidden recipients GPG needs to know  the  keys  to  use  for
              trial  decryption.   The  key  set  with --default-key is always
              tried first, but this is  often  not  sufficient.   This  option
              allows  to  set  more  keys  to  be  used  for trial decryption.
              Although any valid user-id specification may be used for name it
              makes sense to use at least the long keyid to avoid ambiguities.
              Note that gpg-agent might pop up a pinentry for a lot keys to do
              the  trial  decryption.   If  you want to stop all further trial
              decryption you may use close-window button instead of the cancel
              button.

       --try-all-secrets
              Don't  look  at  the key ID as stored in the message but try all
              secret keys in turn to  find  the  right  decryption  key.  This
              option  forces  the  behaviour  as  used by anonymous recipients
              (created by  using  --throw-keyids  or  --hidden-recipient)  and
              might  come  handy in case where an encrypted message contains a
              bogus key ID.

       --skip-hidden-recipients
       --no-skip-hidden-recipients
              During decryption skip all anonymous  recipients.   This  option
              helps  in the case that people use the hidden recipients feature
              to hide there own encrypt-to key from others.   If  oneself  has
              many  secret keys this may lead to a major annoyance because all
              keys are tried in turn to decrypt soemthing which was not really
              intended for it.  The drawback of this option is that it is cur-
              rently not possible to decrypt a  message  which  includes  real
              anonymous recipients.


   Input and Output


       --armor
       -a     Create  ASCII  armored  output.   The  default  is to create the
              binary OpenPGP format.

       --no-armor
              Assume the input data is not in ASCII armored format.

       --output file
       -o file
              Write output to file.

       --max-output n
              This option sets a limit on the number of  bytes  that  will  be
              generated when processing a file. Since OpenPGP supports various
              levels of compression, it is possible that the  plaintext  of  a
              given  message  may  be  significantly  larger than the original
              OpenPGP message. While GnuPG works properly with such  messages,
              there  is often a desire to set a maximum file size that will be
              generated before processing is forced to stop by the OS  limits.
              Defaults to 0, which means "no limit".

       --import-options parameters
              This is a space or comma delimited string that gives options for
              importing keys. Options can be prepended with a  `no-'  to  give
              the opposite meaning. The options are:

              import-local-sigs
                     Allow importing key signatures marked as "local". This is
                     not generally useful unless a shared  keyring  scheme  is
                     being used.  Defaults to no.

              repair-pks-subkey-bug
                     During import, attempt to repair the damage caused by the
                     PKS keyserver bug (pre version 0.9.6) that  mangles  keys
                     with  multiple  subkeys. Note that this cannot completely
                     repair the damaged key as some crucial data is removed by
                     the  keyserver,  but  it  does at least give you back one
                     subkey. Defaults to no for regular --import  and  to  yes
                     for keyserver --recv-keys.

              merge-only
                     During import, allow key updates to existing keys, but do
                     not allow any new keys to be imported. Defaults to no.

              import-clean
                     After import, compact (remove all signatures  except  the
                     self-signature)  any  user  IDs from the new key that are
                     not usable.  Then, remove any signatures from the new key
                     that  are not usable.  This includes signatures that were
                     issued by keys that are not present on the keyring.  This
                     option  is  the  same  as  running the --edit-key command
                     "clean" after import. Defaults to no.

              import-minimal
                     Import the smallest key possible. This removes all signa-
                     tures  except the most recent self-signature on each user
                     ID. This option is the same  as  running  the  --edit-key
                     command "minimize" after import.  Defaults to no.

       --export-options parameters
              This is a space or comma delimited string that gives options for
              exporting keys. Options can be prepended with a  `no-'  to  give
              the opposite meaning. The options are:

              export-local-sigs
                     Allow exporting key signatures marked as "local". This is
                     not generally useful unless a shared  keyring  scheme  is
                     being used.  Defaults to no.

              export-attributes
                     Include  attribute  user IDs (photo IDs) while exporting.
                     This is useful to export keys if they  are  going  to  be
                     used by an OpenPGP program that does not accept attribute
                     user IDs. Defaults to yes.

              export-sensitive-revkeys
                     Include designated revoker information that was marked as
                     "sensitive". Defaults to no.

              export-reset-subkey-passwd
                     When  using  the  --export-secret-subkeys  command,  this
                     option resets the passphrases for all exported subkeys to
                     empty.  This  is useful when the exported subkey is to be
                     used on an unattended machine where a passphrase  doesn't
                     necessarily make sense. Defaults to no.

              export-clean
                     Compact  (remove all signatures from) user IDs on the key
                     being exported if the user IDs are not usable.  Also,  do
                     not  export  any  signatures  that  are  not usable. This
                     includes signatures that were issued by keys that are not
                     present  on  the keyring. This option is the same as run-
                     ning the --edit-key command "clean" before export  except
                     that  the local copy of the key is not modified. Defaults
                     to no.

              export-minimal
                     Export the smallest key possible. This removes all signa-
                     tures  except the most recent self-signature on each user
                     ID. This option is the same  as  running  the  --edit-key
                     command  "minimize"  before  export except that the local
                     copy of the key is not modified. Defaults to no.

       --with-colons
              Print key listings delimited by colons.  Note  that  the  output
              will  be  encoded  in  UTF-8 regardless of any --display-charset
              setting. This format is useful when GnuPG is called from scripts
              and  other  programs as it is easily machine parsed. The details
              of this format are documented in the file  `doc/DETAILS',  which
              is included in the GnuPG source distribution.

       --fixed-list-mode
              Do  not  merge  primary  user ID and primary key in --with-colon
              listing  mode  and  print  all  timestamps  as   seconds   since
              1970-01-01.   Since  GnuPG  2.0.10, this mode is always used and
              thus this option is obsolete; it does not harm to use it though.

       --with-fingerprint
              Same as the command --fingerprint but changes only the format of
              the output and may be used together with another command.

       --with-keygrip
              Include the keygrip in the key listings.


   OpenPGP protocol specific options.


       -t, --textmode
       --no-textmode
              Treat  input files as text and store them in the OpenPGP canoni-
              cal text form with standard "CRLF" line endings. This also  sets
              the  necessary  flags to inform the recipient that the encrypted
              or signed data is text and may need its line  endings  converted
              back  to  whatever  the local system uses. This option is useful
              when communicating between two  platforms  that  have  different
              line ending conventions (UNIX-like to Mac, Mac to Windows, etc).
              --no-textmode disables this option, and is the default.

       --force-v3-sigs
       --no-force-v3-sigs
              OpenPGP states that an implementation should generate v4  signa-
              tures  but PGP versions 5 through 7 only recognize v4 signatures
              on key material. This option forces v3 signatures for signatures
              on data.  Note that this option implies --no-ask-sig-expire, and
              unsets --sig-policy-url,  --sig-notation,  and  --sig-keyserver-
              url, as these features cannot be used with v3 signatures.  --no-
              force-v3-sigs disables this option.  Defaults to no.

       --force-v4-certs
       --no-force-v4-certs
              Always use v4 key signatures even on v3 keys. This  option  also
              changes  the  default hash algorithm for v3 RSA keys from MD5 to
              SHA-1.  --no-force-v4-certs disables this option.

       --force-mdc
              Force the use of encryption with a modification detection  code.
              This  is always used with the newer ciphers (those with a block-
              size greater than 64 bits), or if  all  of  the  recipient  keys
              indicate MDC support in their feature flags.

       --disable-mdc
              Disable the use of the modification detection code. Note that by
              using this option, the encrypted message becomes vulnerable to a
              message modification attack.

       --personal-cipher-preferences string
              Set the list of personal cipher preferences to string.  Use gpg2
              --version to get a list of available algorithms, and use none to
              set  no preference at all.  This allows the user to safely over-
              ride the algorithm chosen by the recipient key  preferences,  as
              GPG  will only select an algorithm that is usable by all recipi-
              ents.  The most highly ranked cipher in this list is  also  used
              for the --symmetric encryption command.

       --personal-digest-preferences string
              Set the list of personal digest preferences to string.  Use gpg2
              --version to get a list of available algorithms, and use none to
              set  no preference at all.  This allows the user to safely over-
              ride the algorithm chosen by the recipient key  preferences,  as
              GPG  will only select an algorithm that is usable by all recipi-
              ents.  The most highly ranked digest algorithm in this  list  is
              also  used  when signing without encryption (e.g. --clearsign or
              --sign).

       --personal-compress-preferences string
              Set the list of personal compression preferences to string.  Use
              gpg2  --version  to  get a list of available algorithms, and use
              none to set no preference at  all.   This  allows  the  user  to
              safely  override the algorithm chosen by the recipient key pref-
              erences, as GPG will only select an algorithm that is usable  by
              all recipients.  The most highly ranked compression algorithm in
              this list is also used when there are no recipient keys to  con-
              sider (e.g. --symmetric).

       --s2k-cipher-algo name
              Use  name  as  the cipher algorithm used to protect secret keys.
              The default cipher is CAST5. This cipher is also used  for  con-
              ventional   encryption   if   --personal-cipher-preferences  and
              --cipher-algo is not given.

       --s2k-digest-algo name
              Use name as the digest algorithm used to mangle the passphrases.
              The default algorithm is SHA-1.

       --s2k-mode n
              Selects  how  passphrases  are  mangled.  If  n  is  0  a  plain
              passphrase (which is not recommended) will be used, a 1  adds  a
              salt  to the passphrase and a 3 (the default) iterates the whole
              process a number of times (see --s2k-count).   Unless  --rfc1991
              is used, this mode is also used for conventional encryption.

       --s2k-count n
              Specify  how  many  times  the  passphrase mangling is repeated.
              This value may range between 1024 and 65011712  inclusive.   The
              default is inquired from gpg-agent.  Note that not all values in
              the 1024-65011712 range are legal and if  an  illegal  value  is
              selected,  GnuPG will round up to the nearest legal value.  This
              option is only meaningful if --s2k-mode is 3.


   Compliance options

       These options control what GnuPG is compliant to.  Only  one  of  these
       options  may be active at a time. Note that the default setting of this
       is nearly always the correct one. See the INTEROPERABILITY  WITH  OTHER
       OPENPGP PROGRAMS section below before using one of these options.

       --gnupg
              Use  standard GnuPG behavior. This is essentially OpenPGP behav-
              ior (see --openpgp), but with some  additional  workarounds  for
              common compatibility problems in different versions of PGP. This
              is the default option, so it is not generally needed, but it may
              be  useful  to  override  a  different  compliance option in the
              gpg.conf file.

       --openpgp
              Reset all packet, cipher and digest options  to  strict  OpenPGP
              behavior.  Use  this  option  to reset all previous options like
              --s2k-*, --cipher-algo,  --digest-algo  and  --compress-algo  to
              OpenPGP compliant values. All PGP workarounds are disabled.

       --rfc4880
              Reset  all  packet, cipher and digest options to strict RFC-4880
              behavior.  Note  that  this  is  currently  the  same  thing  as
              --openpgp.

       --rfc2440
              Reset  all  packet, cipher and digest options to strict RFC-2440
              behavior.

       --rfc1991
              Try to be more RFC-1991 (PGP 2.x) compliant.

       --pgp2 Set up all options to be as PGP 2.x compliant as  possible,  and
              warn  if  an  action is taken (e.g. encrypting to a non-RSA key)
              that will create a message that PGP 2.x will not be able to han-
              dle.  Note  that `PGP 2.x' here means `MIT PGP 2.6.2'. There are
              other versions of PGP 2.x available, but the MIT  release  is  a
              good common baseline.
              This  option implies --rfc1991 --disable-mdc --no-force-v4-certs
              --escape-from-lines --force-v3-sigs --cipher-algo IDEA --digest-
              algo  MD5  --compress-algo ZIP. It also disables --textmode when
              encrypting.

       --pgp6 Set up all options to be as PGP 6 compliant  as  possible.  This
              restricts  you  to  the  ciphers  IDEA  (if  the  IDEA plugin is
              installed), 3DES, and CAST5, the hashes MD5, SHA1 and RIPEMD160,
              and  the compression algorithms none and ZIP. This also disables
              --throw-keyids, and making signatures with  signing  subkeys  as
              PGP 6 does not understand signatures made by signing subkeys.
              This  option  implies --disable-mdc --escape-from-lines --force-
              v3-sigs.

       --pgp7 Set up all options to be as PGP 7 compliant as possible. This is
              identical  to  --pgp6 except that MDCs are not disabled, and the
              list of allowable ciphers is expanded  to  add  AES128,  AES192,
              AES256, and TWOFISH.

       --pgp8 Set  up  all options to be as PGP 8 compliant as possible. PGP 8
              is a lot closer to the OpenPGP standard than  previous  versions
              of  PGP,  so  all  this  does  is disable --throw-keyids and set
              --escape-from-lines.  All algorithms are allowed except for  the
              SHA224, SHA384, and SHA512 digests.


   Doing things one usually doesn't want to do.


       -n
       --dry-run
              Don't make any changes (this is not completely implemented).

       --list-only
              Changes  the  behaviour of some commands. This is like --dry-run
              but different in some cases. The semantic of this command may be
              extended  in  the  future.  Currently  it  only skips the actual
              decryption pass and therefore enables  a  fast  listing  of  the
              encryption keys.

       -i
       --interactive
              Prompt before overwriting any files.

       --debug-level level
              Select  the debug level for investigating problems. level may be
              a numeric value or by a keyword:

              none   No debugging at all.  A value of less than 1 may be  used
                     instead of the keyword.
              basic  Some  basic  debug messages.  A value between 1 and 2 may
                     be used instead of the keyword.
              advanced
                     More verbose debug messages.  A value between 3 and 5 may
                     be used instead of the keyword.
              expert Even more detailed messages.  A value between 6 and 8 may
                     be used instead of the keyword.
              guru   All of the debug messages you can get.  A  value  greater
                     than  8 may be used instead of the keyword.  The creation
                     of hash tracing files is only enabled if the  keyword  is
                     used.
       How  these  messages  are  mapped  to the actual debugging flags is not
       specified and may change with newer releases of this program. They  are
       however carefully selected to best aid in debugging.

       --debug flags
              Set  debugging flags. All flags are or-ed and flags may be given
              in C syntax (e.g. 0x0042).

       --debug-all
              Set all useful debugging flags.

       --faked-system-time epoch
              This option is only useful for testing; it sets the system  time
              back  or  forth  to epoch which is the number of seconds elapsed
              since the year 1970.  Alternatively epoch may be given as a full
              ISO time string (e.g. "20070924T154812").

       --enable-progress-filter
              Enable certain PROGRESS status outputs. This option allows fron-
              tends to display a progress indicator while  gpg  is  processing
              larger files.  There is a slight performance overhead using it.

       --status-fd n
              Write  special status strings to the file descriptor n.  See the
              file DETAILS in the documentation for a listing of them.

       --status-file file
              Same as --status-fd, except the status data is written  to  file
              file.

       --logger-fd n
              Write log output to file descriptor n and not to STDERR.

       --log-file file
       --logger-file file
              Same  as  --logger-fd, except the logger data is written to file
              file.  Note that --log-file is only implemented for GnuPG-2.

       --attribute-fd n
              Write attribute subpackets to the file  descriptor  n.  This  is
              most  useful for use with --status-fd, since the status messages
              are needed to separate  out  the  various  subpackets  from  the
              stream delivered to the file descriptor.

       --attribute-file file
              Same  as --attribute-fd, except the attribute data is written to
              file file.

       --comment string
       --no-comments
              Use string as a comment string  in  clear  text  signatures  and
              ASCII armored messages or keys (see --armor). The default behav-
              ior is not to use a comment string. --comment  may  be  repeated
              multiple  times  to  get multiple comment strings. --no-comments
              removes all comments.  It is a good idea to keep the length of a
              single  comment  below 60 characters to avoid problems with mail
              programs wrapping such lines.  Note that comment lines, like all
              other header lines, are not protected by the signature.

       --emit-version
       --no-emit-version
              Force  inclusion  of the version string in ASCII armored output.
              --no-emit-version disables this option.

       --sig-notation name=value
       --cert-notation name=value
       -N, --set-notation name=value
              Put the name value pair into the  signature  as  notation  data.
              name  must  consist  only of printable characters or spaces, and
              must contain a '@' character in  the  form  keyname AT domain.exam-
              ple.com  (substituting  the appropriate keyname and domain name,
              of course).  This is to  help  prevent  pollution  of  the  IETF
              reserved notation namespace. The --expert flag overrides the '@'
              check. value may be any printable string; it will be encoded  in
              UTF8,  so  you  should  check that your --display-charset is set
              correctly. If you prefix name with an exclamation mark (!),  the
              notation  data  will  be flagged as critical (rfc4880:5.2.3.16).
              --sig-notation sets a notation for data signatures. --cert-nota-
              tion sets a notation for key signatures (certifications). --set-
              notation sets both.
              There are special codes that may be used in notation names. "%k"
              will  be  expanded into the key ID of the key being signed, "%K"
              into the long key ID of the key being signed, "%f" into the fin-
              gerprint  of  the  key being signed, "%s" into the key ID of the
              key making the signature, "%S" into the long key ID of  the  key
              making  the signature, "%g" into the fingerprint of the key mak-
              ing the signature (which might be a subkey), "%p" into the  fin-
              gerprint  of  the  primary  key of the key making the signature,
              "%c" into the signature count from the  OpenPGP  smartcard,  and
              "%%" results in a single "%". %k, %K, and %f are only meaningful
              when making a key signature  (certification),  and  %c  is  only
              meaningful when using the OpenPGP smartcard.

       --sig-policy-url string
       --cert-policy-url string
       --set-policy-url string
              Use  string  as  a Policy URL for signatures (rfc4880:5.2.3.20).
              If you prefix it with an exclamation mark (!),  the  policy  URL
              packet will be flagged as critical. --sig-policy-url sets a pol-
              icy url for data signatures. --cert-policy-url sets a policy url
              for key signatures (certifications). --set-policy-url sets both.
              The same %-expandos used for notation data are available here as
              well.

       --sig-keyserver-url string
              Use string as a preferred keyserver URL for data signatures.  If
              you  prefix  it  with an exclamation mark (!), the keyserver URL
              packet will be flagged as critical.
              The same %-expandos used for notation data are available here as
              well.

       --set-filename string
              Use  string  as  the  filename  which is stored inside messages.
              This overrides the default, which is to use the actual  filename
              of the file being encrypted.

       --for-your-eyes-only
       --no-for-your-eyes-only
              Set  the  `for  your eyes only' flag in the message. This causes
              GnuPG to refuse to save the file unless the --output  option  is
              given,  and PGP to use a "secure viewer" with a claimed Tempest-
              resistant font to display the  message.  This  option  overrides
              --set-filename.  --no-for-your-eyes-only disables this option.

       --use-embedded-filename
       --no-use-embedded-filename
              Try  to  create a file with a name as embedded in the data. This
              can be a dangerous option  as  it  allows  to  overwrite  files.
              Defaults to no.

       --cipher-algo name
              Use  name as cipher algorithm. Running the program with the com-
              mand --version yields a list of supported algorithms. If this is
              not  used  the cipher algorithm is selected from the preferences
              stored with the key. In general, you do not  want  to  use  this
              option as it allows you to violate the OpenPGP standard.  --per-
              sonal-cipher-preferences is the safe way to accomplish the  same
              thing.

       --digest-algo name
              Use  name  as  the message digest algorithm. Running the program
              with the command --version yields  a  list  of  supported  algo-
              rithms.  In  general,  you  do not want to use this option as it
              allows you to violate the OpenPGP  standard.  --personal-digest-
              preferences is the safe way to accomplish the same thing.

       --compress-algo name
              Use compression algorithm name. "zlib" is RFC-1950 ZLIB compres-
              sion. "zip" is RFC-1951 ZIP compression which is  used  by  PGP.
              "bzip2"  is  a  more modern compression scheme that can compress
              some things better than zip or zlib, but at  the  cost  of  more
              memory used during compression and decompression. "uncompressed"
              or "none" disables compression. If this option is not used,  the
              default  behavior is to examine the recipient key preferences to
              see which algorithms the recipient supports. If all else  fails,
              ZIP is used for maximum compatibility.
              ZLIB  may  give better compression results than ZIP, as the com-
              pression window size is not limited to 8k. BZIP2 may  give  even
              better  compression  results  than that, but will use a signifi-
              cantly larger amount of memory while compressing and decompress-
              ing.  This  may  be  significant in low memory situations. Note,
              however, that PGP (all versions) only supports ZIP  compression.
              Using  any algorithm other than ZIP or "none" will make the mes-
              sage unreadable with PGP. In general, you do  not  want  to  use
              this  option  as  it allows you to violate the OpenPGP standard.
              --personal-compress-preferences is the safe  way  to  accomplish
              the same thing.

       --cert-digest-algo name
              Use  name  as  the  message digest algorithm used when signing a
              key. Running the program with the  command  --version  yields  a
              list  of  supported  algorithms.  Be aware that if you choose an
              algorithm that GnuPG supports but other OpenPGP  implementations
              do  not,  then some users will not be able to use the key signa-
              tures you make, or quite possibly your entire key.

       --disable-cipher-algo name
              Never allow the use of name as cipher algorithm.  The given name
              will  not be checked so that a later loaded algorithm will still
              get disabled.

       --disable-pubkey-algo name
              Never allow the use of name as public key algorithm.  The  given
              name  will  not be checked so that a later loaded algorithm will
              still get disabled.

       --throw-keyids
       --no-throw-keyids
              Do not put the recipient key IDs into encrypted  messages.  This
              helps  to  hide  the  receivers  of the message and is a limited
              countermeasure against traffic analysis. ([Using a little social
              engineering  anyone who is able to decrypt the message can check
              whether one of the other recipients is the  one  he  suspects.])
              On  the  receiving side, it may slow down the decryption process
              because all available secret keys must  be  tried.   --no-throw-
              keyids disables this option. This option is essentially the same
              as using --hidden-recipient for all recipients.

       --not-dash-escaped
              This option changes the behavior of cleartext signatures so that
              they  can  be  used for patch files. You should not send such an
              armored file via email because all spaces and line  endings  are
              hashed  too.  You  can  not use this option for data which has 5
              dashes at the beginning of a line, patch files don't have  this.
              A  special  armor  header  line tells GnuPG about this cleartext
              signature option.

       --escape-from-lines
       --no-escape-from-lines
              Because some mailers change  lines  starting  with  "From  "  to
              ">From  "  it is good to handle such lines in a special way when
              creating cleartext signatures to prevent the  mail  system  from
              breaking  the  signature. Note that all other PGP versions do it
              this way too.  Enabled by default.  --no-escape-from-lines  dis-
              ables this option.

       --passphrase-repeat n
              Specify  how  many  times  gpg2 will request a new passphrase be
              repeated.  This is useful for  helping  memorize  a  passphrase.
              Defaults to 1 repetition.

       --passphrase-fd n
              Read  the passphrase from file descriptor n. Only the first line
              will be read from file descriptor n. If you use  0  for  n,  the
              passphrase  will  be  read  from STDIN. This can only be used if
              only one passphrase is supplied.  Note that this  passphrase  is
              only  used  if  the option --batch has also been given.  This is
              different from gpg.

       --passphrase-file file
              Read the passphrase from file file. Only the first line will  be
              read  from  file  file.  This  can  only  be  used  if  only one
              passphrase is supplied. Obviously, a passphrase stored in a file
              is  of  questionable security if other users can read this file.
              Don't use this option if you  can  avoid  it.   Note  that  this
              passphrase  is  only  used  if  the option --batch has also been
              given.  This is different from gpg.

       --passphrase string
              Use string as the passphrase. This can only be used if only  one
              passphrase  is supplied. Obviously, this is of very questionable
              security on a multi-user system. Don't use this  option  if  you
              can  avoid  it.   Note  that this passphrase is only used if the
              option --batch has also been given.  This is different from gpg.

       --pinentry-mode mode
              Set the pinentry mode to mode.  Allowed values for mode are:
              default
                     Use the default of the agent, which is ask.
              ask    Force the use of the Pinentry.
              cancel Emulate use of Pinentry's cancel button.
              error  Return a Pinentry error (``No Pinentry'').
              loopback
                     Redirect Pinentry queries to the caller.   Note  that  in
                     contrast to Pinentry the user is not prompted again if he
                     enters a bad password.

       --command-fd n
              This is a replacement for the deprecated shared-memory IPC mode.
              If  this  option  is  enabled,  user  input  on questions is not
              expected from the TTY but from the  given  file  descriptor.  It
              should   be   used  together  with  --status-fd.  See  the  file
              doc/DETAILS in the source distribution for details on how to use
              it.

       --command-file file
              Same  as  --command-fd, except the commands are read out of file
              file

       --allow-non-selfsigned-uid
       --no-allow-non-selfsigned-uid
              Allow the import and use of keys with user  IDs  which  are  not
              self-signed.  This is not recommended, as a non self-signed user
              ID is trivial to forge. --no-allow-non-selfsigned-uid disables.

       --allow-freeform-uid
              Disable all checks on the form of the user ID while generating a
              new  one.  This option should only be used in very special envi-
              ronments as it does not ensure the de-facto standard  format  of
              user IDs.

       --ignore-time-conflict
              GnuPG  normally  checks that the timestamps associated with keys
              and signatures have plausible values. However, sometimes a  sig-
              nature  seems  to  be  older than the key due to clock problems.
              This  option  makes  these  checks  just  a  warning.  See  also
              --ignore-valid-from for timestamp issues on subkeys.

       --ignore-valid-from
              GnuPG  normally  does  not select and use subkeys created in the
              future.  This option allows  the  use  of  such  keys  and  thus
              exhibits the pre-1.0.7 behaviour. You should not use this option
              unless there is some clock problem. See also  --ignore-time-con-
              flict for timestamp issues with signatures.

       --ignore-crc-error
              The  ASCII  armor used by OpenPGP is protected by a CRC checksum
              against transmission errors. Occasionally the CRC  gets  mangled
              somewhere  on  the  transmission  channel but the actual content
              (which is protected by the OpenPGP  protocol  anyway)  is  still
              okay. This option allows GnuPG to ignore CRC errors.

       --ignore-mdc-error
              This  option  changes  a MDC integrity protection failure into a
              warning.  This can be useful if a message is partially  corrupt,
              but  it  is necessary to get as much data as possible out of the
              corrupt message.  However, be aware that a MDC protection  fail-
              ure  may also mean that the message was tampered with intention-
              ally by an attacker.

       --no-default-keyring
              Do not add the default keyrings to the list  of  keyrings.  Note
              that  GnuPG will not operate without any keyrings, so if you use
              this option and do not provide alternate keyrings via  --keyring
              or  --secret-keyring, then GnuPG will still use the default pub-
              lic or secret keyrings.

       --skip-verify
              Skip the signature verification step. This may be used  to  make
              the  decryption  faster  if  the  signature  verification is not
              needed.

       --with-key-data
              Print key listings delimited by colons (like --with-colons)  and
              print the public key data.

       --fast-list-mode
              Changes  the output of the list commands to work faster; this is
              achieved by leaving some parts empty.  Some  applications  don't
              need  the  user  ID and the trust information given in the list-
              ings. By using this options they can get a faster  listing.  The
              exact  behaviour  of  this option may change in future versions.
              If you are missing some information, don't use this option.

       --no-literal
              This is not for normal use. Use the source to see  for  what  it
              might be useful.

       --set-filesize
              This  is  not  for normal use. Use the source to see for what it
              might be useful.

       --show-session-key
              Display the session key used for one  message.  See  --override-
              session-key for the counterpart of this option.
              We think that Key Escrow is a Bad Thing; however the user should
              have the freedom to decide whether to go to prison or to  reveal
              the  content  of  one  specific message without compromising all
              messages ever encrypted for one secret key. DON'T USE IT  UNLESS
              YOU ARE REALLY FORCED TO DO SO.

       --override-session-key string
              Don't  use the public key but the session key string. The format
              of this string is the same as the one printed by --show-session-
              key.  This  option  is normally not used but comes handy in case
              someone forces you to reveal the content of  an  encrypted  mes-
              sage;  using this option you can do this without handing out the
              secret key.

       --ask-sig-expire
       --no-ask-sig-expire
              When making a data signature, prompt for an expiration time.  If
              this  option  is  not  specified,  the  expiration  time set via
              --default-sig-expire is used. --no-ask-sig-expire disables  this
              option.

       --default-sig-expire
              The  default  expiration  time  to use for signature expiration.
              Valid values are "0" for no expiration, a number followed by the
              letter  d  (for  days), w (for weeks), m (for months), or y (for
              years) (for example "2m"  for  two  months,  or  "5y"  for  five
              years),  or an absolute date in the form YYYY-MM-DD. Defaults to
              "0".

       --ask-cert-expire
       --no-ask-cert-expire
              When making a key signature, prompt for an expiration  time.  If
              this  option  is  not  specified,  the  expiration  time set via
              --default-cert-expire  is  used.  --no-ask-cert-expire  disables
              this option.

       --default-cert-expire
              The default expiration time to use for key signature expiration.
              Valid values are "0" for no expiration, a number followed by the
              letter  d  (for  days), w (for weeks), m (for months), or y (for
              years) (for example "2m"  for  two  months,  or  "5y"  for  five
              years),  or an absolute date in the form YYYY-MM-DD. Defaults to
              "0".

       --allow-secret-key-import
              This is an obsolete option and is not used anywhere.

       --allow-multiple-messages
       --no-allow-multiple-messages
              Allow processing of multiple OpenPGP  messages  contained  in  a
              single file or stream.  Some programs that call GPG are not pre-
              pared to deal with multiple messages being  processed  together,
              so  this option defaults to no.  Note that versions of GPG prior
              to 1.4.7 always allowed multiple messages.
              Warning: Do not use this option unless you need it as  a  tempo-
              rary workaround!

       --enable-special-filenames
              This  options  enables  a  mode  in  which filenames of the form
              `-&n', where n is a non-negative decimal number,  refer  to  the
              file descriptor n and not to a file with that name.

       --no-expensive-trust-checks
              Experimental use only.

       --preserve-permissions
              Don't  change  the  permissions of a secret keyring back to user
              read/write only. Use this option only if you  really  know  what
              you are doing.

       --default-preference-list string
              Set  the  list of default preferences to string. This preference
              list is used for new keys and becomes the default for  "setpref"
              in the edit menu.

       --default-keyserver-url name
              Set  the  default  keyserver URL to name. This keyserver will be
              used as the keyserver URL when writing a new self-signature on a
              key, which includes key generation and changing preferences.

       --list-config
              Display various internal configuration parameters of GnuPG. This
              option is intended for external programs that call GnuPG to per-
              form  tasks,  and  is  thus  not  generally useful. See the file
              `doc/DETAILS' in the source  distribution  for  the  details  of
              which  configuration  items may be listed. --list-config is only
              usable with --with-colons set.

       --gpgconf-list
              This command is similar to --list-config  but  in  general  only
              internally used by the gpgconf tool.

       --gpgconf-test
              This  is  more or less dummy action.  However it parses the con-
              figuration file and returns with failure  if  the  configuration
              file would prevent gpg from startup.  Thus it may be used to run
              a syntax check on the configuration file.


   Deprecated options


       --show-photos
       --no-show-photos
              Causes  --list-keys,  --list-sigs,  --list-public-keys,  --list-
              secret-keys, and verifying a signature to also display the photo
              ID attached to the key, if any. See also  --photo-viewer.  These
              options  are  deprecated.  Use  --list-options  [no-]show-photos
              and/or --verify-options [no-]show-photos instead.

       --show-keyring
              Display the keyring name at the head of  key  listings  to  show
              which keyring a given key resides on. This option is deprecated:
              use --list-options [no-]show-keyring instead.

       --always-trust
              Identical to --trust-model always. This option is deprecated.

       --show-notation
       --no-show-notation
              Show signature notations  in  the  --list-sigs  or  --check-sigs
              listings  as  well as when verifying a signature with a notation
              in  it.  These  options  are  deprecated.   Use   --list-options
              [no-]show-notation  and/or  --verify-options  [no-]show-notation
              instead.

       --show-policy-url
       --no-show-policy-url
              Show policy URLs in the --list-sigs or --check-sigs listings  as
              well  as  when  verifying  a  signature with a policy URL in it.
              These options are deprecated. Use --list-options  [no-]show-pol-
              icy-url and/or --verify-options [no-]show-policy-url instead.



EXAMPLES
       gpg -se -r Bob file
              sign and encrypt for user Bob

       gpg --clearsign file
              make a clear text signature

       gpg -sb file
              make a detached signature

       gpg -u 0x12345678 -sb file
              make a detached signature with the key 0x12345678

       gpg --list-keys user_ID
              show keys

       gpg --fingerprint user_ID
              show fingerprint

       gpg --verify pgpfile
       gpg --verify sigfile
              Verify the signature of the file but do not output the data. The
              second form is used for detached signatures,  where  sigfile  is
              the  detached signature (either ASCII armored or binary) and are
              the signed data; if this is not given,  the  name  of  the  file
              holding the signed data is constructed by cutting off the exten-
              sion (".asc" or ".sig") of sigfile or by asking the user for the
              filename.


HOW TO SPECIFY A USER ID
       There  are  different ways to specify a user ID to GnuPG.  Some of them
       are only valid for gpg others are only good for  gpgsm.   Here  is  the
       entire list of ways to specify a key:

       By key Id.
              This  format  is  deduced  from the length of the string and its
              content or 0x prefix. The key Id of an X.509 certificate are the
              low  64  bits  of  its SHA-1 fingerprint.  The use of key Ids is
              just a shortcut, for all automated  processing  the  fingerprint
              should be used.
              When  using gpg an exclamation mark (!) may be appended to force
              using the specified primary or secondary key and not to try  and
              calculate which primary or secondary key to use.
              The last four lines of the example give the key ID in their long
              form as internally used by the OpenPGP protocol. You can see the
              long key ID using the option --with-colons.
         234567C4
         0F34E556E
         01347A56A
         0xAB123456
         234AABBCC34567C4
         0F323456784E56EAB
         01AB3FED1347A5612
         0x234AABBCC34567C4


       By fingerprint.
              This  format  is  deduced  from the length of the string and its
              content or the 0x prefix.  Note, that only the 20  byte  version
              fingerprint  is available with gpgsm (i.e. the SHA-1 hash of the
              certificate).
              When using gpg an exclamation mark (!) may be appended to  force
              using  the specified primary or secondary key and not to try and
              calculate which primary or secondary key to use.
              The best way to specify a key Id is by  using  the  fingerprint.
              This  avoids  any  ambiguities in case that there are duplicated
              key IDs.
         1234343434343434C434343434343434
         123434343434343C3434343434343734349A3434
         0E12343434343434343434EAB3484343434343434
         0xE12343434343434343434EAB3484343434343434

       (gpgsm also accepts colons between  each  pair  of  hexadecimal  digits
       because  this  is the de-facto standard on how to present X.509 finger-
       prints.)

       By exact match on OpenPGP user ID.
              This is denoted by a leading equal sign. It does not make  sense
              for X.509 certificates.
         =Heinrich Heine <heinrichh AT uni-duesseldorf.de>

       By exact match on an email address.
              This  is  indicated  by enclosing the email address in the usual
              way with left and right angles.
         <heinrichh AT uni-duesseldorf.de>

       By word match.
              All words must match exactly (not case sensitive) but can appear
              in  any  order in the user ID or a subjects name.  Words are any
              sequences of letters, digits, the underscore and all  characters
              with bit 7 set.
         +Heinrich Heine duesseldorf

       By exact match on the subject's DN.
              This  is  indicated by a leading slash, directly followed by the
              RFC-2253 encoded DN of the subject.  Note that you can't use the
              string  printed  by "gpgsm --list-keys" because that one as been
              reordered and modified for better readability; use --with-colons
              to print the raw (but standard escaped) RFC-2253 string
         /CN=Heinrich Heine,O=Poets,L=Paris,C=FR

       By exact match on the issuer's DN.
              This is indicated by a leading hash mark, directly followed by a
              slash and then directly followed by the rfc2253  encoded  DN  of
              the  issuer.   This  should  return the Root cert of the issuer.
              See note above.
         #/CN=Root Cert,O=Poets,L=Paris,C=FR

       By exact match on serial number and issuer's DN.
              This is indicated by a hash mark, followed  by  the  hexadecimal
              representation  of  the  serial number, then followed by a slash
              and the RFC-2253 encoded DN of the issuer. See note above.
         #4F03/CN=Root Cert,O=Poets,L=Paris,C=FR

       By keygrip
              This is indicated by an ampersand followed by the 40 hex  digits
              of  a  keygrip.  gpgsm prints the keygrip when using the command
              --dump-cert.  It does not yet work for OpenPGP keys.
         &D75F22C3F86E355877348498CDC92BD21010A480

       By substring match.
              This is the default mode but applications may want to explicitly
              indicate  this  by  putting the asterisk in front.  Match is not
              case sensitive.
         Heine
         *Heine

       Please note that we have reused the hash mark identifier which was used
       in  old  GnuPG  versions to indicate the so called local-id.  It is not
       anymore used and there should be  no  conflict  when  used  with  X.509
       stuff.
       Using the RFC-2253 format of DNs has the drawback that it is not possi-
       ble to map them back to the original encoding, however we don't have to
       do this because our key database stores this encoding as meta data.


FILES
       There  are  a  few  configuration  files  to control certain aspects of
       gpg2's operation. Unless noted, they are expected in the  current  home
       directory (see: [option --homedir]).

       gpg.conf
              This is the standard configuration file read by gpg2 on startup.
              It may contain any valid long option; the leading two dashes may
              not  be  entered  and  the  option may not be abbreviated.  This
              default name may be changed on  the  command  line  (see:  [gpg-
              option --options]).  You should backup this file.

       Note that on larger installations, it is useful to put predefined files
       into the directory `/etc/skel/.gnupg/'  so  that  newly  created  users
       start  up with a working configuration.  For existing users the a small
       helper script is provided to create these files (see: [addgnupghome]).
       For internal purposes gpg2 creates and maintains  a  few  other  files;
       They  all  live  in in the current home directory (see: [option --home-
       dir]).  Only the gpg2 may modify these files.

       ~/.gnupg/secring.gpg
              The secret keyring.  You should backup this file.

       ~/.gnupg/secring.gpg.lock
              The lock file for the secret keyring.

       ~/.gnupg/pubring.gpg
              The public keyring.  You should backup this file.

       ~/.gnupg/pubring.gpg.lock
              The lock file for the public keyring.

       ~/.gnupg/trustdb.gpg
              The trust database.  There is no need to backup this file; it is
              better  to  backup the ownertrust values (see: [option --export-
              ownertrust]).

       ~/.gnupg/trustdb.gpg.lock
              The lock file for the trust database.

       ~/.gnupg/random_seed
              A file used to preserve the state of the internal random pool.

       /usr[/local]/share/gnupg/options.skel
              The skeleton options file.

       /usr[/local]/lib/gnupg/
              Default location for extensions.

       Operation is further controlled by a few environment variables:

       HOME   Used to locate the default home directory.

       GNUPGHOME
              If set directory used instead of "~/.gnupg".

       GPG_AGENT_INFO
              Used to locate the gpg-agent.
                The value consists of 3 colon delimited fields: The  first  is
              the path
                to the Unix Domain Socket, the second the PID of the gpg-agent
              and the
                protocol version which should be set to 1. When  starting  the
              gpg-agent
                as described in its documentation, this variable is set to the
              correct
                value. The option --gpg-agent-info can be used to override it.

       PINENTRY_USER_DATA
              This value is passed via gpg-agent to pinentry.  It is useful to
              convey extra information to a custom pinentry.

       COLUMNS
       LINES  Used to size some displays to the full size of the screen.

       LANGUAGE
              Apart  from  its  use  by  GNU, it is used in the W32 version to
              override the language selection done through the  Registry.   If
              used  and  set  to a valid and available language name (langid),
              the file with the translation is loaded from
              gpgdir/gnupg.nls/langid.mo.  Here gpgdir is the directory out of
              which the gpg binary has been loaded.  If it can't be loaded the
              Registry is tried and as last resort the native  Windows  locale
              system is used.


BUGS
       On older systems this program should be installed as setuid(root). This
       is necessary to lock memory pages. Locking memory  pages  prevents  the
       operating   system   from  writing  memory  pages  (which  may  contain
       passphrases or other sensitive material) to disk. If you get no warning
       message  about  insecure  memory your operating system supports locking
       without being root. The program drops root privileges as soon as locked
       memory is allocated.
       Note  also  that  some systems (especially laptops) have the ability to
       ``suspend to disk'' (also known as ``safe  sleep''  or  ``hibernate'').
       This  writes  all  memory to disk before going into a low power or even
       powered off mode.  Unless measures are taken in the operating system to
       protect  the  saved memory, passphrases or other sensitive material may
       be recoverable from it later.
       Before you report a bug you should first search the  mailing  list  ar-
       chives  for  similar  problems  and second check whether such a bug has
       already been reported to our bug tracker at http://bugs.gnupg.org .

SEE ALSO
       gpgv(1), gpgsm(1), gpg-agent(1)
       The full documentation for this tool is maintained as a Texinfo manual.
       If  GnuPG and the info program are properly installed at your site, the
       command
         info gnupg
       should give you access to the complete manual including a  menu  struc-
       ture and an index.

GnuPG 2.0.22                      2018-07-13                           GPG2(1)