gencat(images) - phpMan

GENCAT(1P)                 POSIX Programmer's Manual                GENCAT(1P)

PROLOG
       This  manual  page is part of the POSIX Programmer's Manual.  The Linux
       implementation of this interface may differ (consult the  corresponding
       Linux  manual page for details of Linux behavior), or the interface may
       not be implemented on Linux.
NAME
       gencat - generate a formatted message catalog
SYNOPSIS
       gencat catfile msgfile...
DESCRIPTION
       The gencat utility shall merge the message  text  source  file  msgfile
       into  a  formatted  message  catalog catfile. The file catfile shall be
       created if it does not already exist. If catfile does exist,  its  mes-
       sages  shall be included in the new catfile. If set and message numbers
       collide, the new message text defined in msgfile shall replace the  old
       message text currently contained in catfile.
OPTIONS
       None.
OPERANDS
       The following operands shall be supported:
       catfile
              A  pathname  of  the formatted message catalog. If '-' is speci-
              fied, standard output shall be used. The format of  the  message
              catalog produced is unspecified.
       msgfile
              A  pathname  of  a message text source file. If '-' is specified
              for an instance of msgfile, standard input shall  be  used.  The
              format  of  message text source files is defined in the EXTENDED
              DESCRIPTION section.

STDIN
       The standard input shall not be used unless a msgfile operand is speci-
       fied as '-' .
INPUT FILES
       The input files shall be text files.
ENVIRONMENT VARIABLES
       The  following environment variables shall affect the execution of gen-
       cat:
       LANG   Provide a default value for the  internationalization  variables
              that  are  unset  or  null.  (See the Base Definitions volume of
              IEEE Std 1003.1-2001, Section  8.2,  Internationalization  Vari-
              ables  for the precedence of internationalization variables used
              to determine the values of locale categories.)
       LC_ALL If set to a non-empty string value, override the values  of  all
              the other internationalization variables.
       LC_CTYPE
              Determine  the  locale  for  the  interpretation of sequences of
              bytes of text data as characters (for  example,  single-byte  as
              opposed to multi-byte characters in arguments and input files).
       LC_MESSAGES
              Determine  the  locale  that should be used to affect the format
              and contents of diagnostic messages written to standard error.
       NLSPATH
              Determine the location of message catalogs for the processing of
              LC_MESSAGES .

ASYNCHRONOUS EVENTS
       Default.
STDOUT
       The  standard  output  shall  not be used unless the catfile operand is
       specified as '-' .
STDERR
       The standard error shall be used only for diagnostic messages.
OUTPUT FILES
       None.
EXTENDED DESCRIPTION
       The content of a message text file shall be in the  format  defined  as
       follows.  Note  that the fields of a message text source line are sepa-
       rated by a single <blank>. Any other <blank>s are considered to be part
       of the subsequent field.
       $set  n comment
              This line specifies the set identifier of the following messages
              until the next $set or end-of-file appears. The  n  denotes  the
              set  identifier,  which  is defined as a number in the range [1,
              {NL_SETMAX}] (see the <limits.h> header defined in the Base Def-
              initions  volume of IEEE Std 1003.1-2001). The application shall
              ensure that set identifiers are  presented  in  ascending  order
              within  a  single  source  file, but need not be contiguous. Any
              string following the set identifier shall be treated as  a  com-
              ment. If no $set directive is specified in a message text source
              file, all messages shall be located in an implementation-defined
              default message set NL_SETD (see the <nl_types.h> header defined
              in the Base Definitions volume of IEEE Std 1003.1-2001).
       $delset  n comment
              This line deletes message set n from an existing  message  cata-
              log.   The n denotes the set number [1, {NL_SETMAX}]. Any string
              following the set number shall be treated as a comment.
       $  comment
              A line beginning with '$' followed by a <blank> shall be treated
              as a comment.
       m message-text
              The m denotes the message identifier, which is defined as a num-
              ber in the range [1, {NL_MSGMAX}] (see the  <limits.h>  header).
              The message-text shall be stored in the message catalog with the
              set identifier specified by the last $set  directive,  and  with
              message  identifier  m.  If  the  message-text  is  empty, and a
              <blank> field separator is present, an  empty  string  shall  be
              stored  in  the  message catalog. If a message source line has a
              message number, but neither a field separator nor  message-text,
              the  existing message with that number (if any) shall be deleted
              from the catalog. The  application  shall  ensure  that  message
              identifiers are in ascending order within a single set, but need
              not be contiguous. The application shall ensure that the  length
              of message-text is in the range [0, {NL_TEXTMAX}] (see the <lim-
              its.h> header).
       $quote  n
              This line specifies an optional quote character c, which can  be
              used  to  surround  message-text so that trailing spaces or null
              (empty) messages are visible  in  a  message  source  line.   By
              default, or if an empty $quote directive is supplied, no quoting
              of message-text shall be recognized.

       Empty lines in a message text source file shall be ignored. The effects
       of lines starting with any character other than those defined above are
       implementation-defined.
       Text strings can contain the special characters  and  escape  sequences
       defined in the following table:
                        Description         Symbol   Sequence
                        <newline>           NL(LF)   \n
                        Horizontal-tab      HT       \t
                        <vertical-tab>      VT       \v
                        <backspace>         BS       \b
                        <carriage-return>   CR       \r
                        <form-feed>         FF       \f
                        Backslash           \        \\
                        Bit pattern         ddd      \ddd
       The  escape sequence "\ddd" consists of backslash followed by one, two,
       or three octal digits, which shall be taken to specify the value of the
       desired character. If the character following a backslash is not one of
       those specified, the backslash shall be ignored.
       Backslash ( '\' ) followed by a <newline> is also used  to  continue  a
       string  on the following line. Thus, the following two lines describe a
       single message string:

              1 This line continues \
              to the next line
       which shall be equivalent to:

              1 This line continues to the next line
EXIT STATUS
       The following exit values shall be returned:
        0     Successful completion.
       >0     An error occurred.

CONSEQUENCES OF ERRORS
       Default.
       The following sections are informative.
APPLICATION USAGE
       Message catalogs produced by gencat are binary  encoded,  meaning  that
       their  portability  cannot  be  guaranteed  between  different types of
       machine. Thus, just as C programs need to be recompiled for  each  type
       of machine, so message catalogs must be recreated via gencat.
EXAMPLES
       None.
RATIONALE
       None.
FUTURE DIRECTIONS
       None.
SEE ALSO
       iconv(),  the  Base  Definitions  volume of IEEE Std 1003.1-2001, <lim-
       its.h>, <nl_types.h>
COPYRIGHT
       Portions of this text are reprinted and reproduced in  electronic  form
       from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
       -- Portable Operating System Interface (POSIX),  The  Open  Group  Base
       Specifications  Issue  6,  Copyright  (C) 2001-2003 by the Institute of
       Electrical and Electronics Engineers, Inc and The Open  Group.  In  the
       event of any discrepancy between this version and the original IEEE and
       The Open Group Standard, the original IEEE and The Open Group  Standard
       is  the  referee document. The original Standard can be obtained online
       at http://www.opengroup.org/unix/online.html .

IEEE/The Open Group                  2003                           GENCAT(1P)