Test2::Transition(category18-confixx.html) - phpMan

Test2::Transition(3)  User Contributed Perl Documentation Test2::Transition(3)

NAME
       Test2::Transition - Transition notes when upgrading to Test2
DESCRIPTION
       This is where gotchas and breakages related to the Test2 upgrade are
       documented. The upgrade causes Test::Builder to defer to Test2 under
       the hood.  This transition is mostly transparent, but there are a few
       cases that can trip you up.
THINGS THAT BREAK
       This is the list of scenarios that break with the new internals.
   Test::Builder1.5/2 conditionals
       The Problem
       a few years back there were two attempts to upgrade/replace
       Test::Builder.  Confusingly these were called Test::Builder2 and
       Test::Builder1.5, in that order. Many people put conditionals in their
       code to check the Test::Builder version number and adapt their code
       accordingly.
       The Test::Builder2/1.5 projects both died out. Now the conditional code
       people added has become a mine field. A vast majority of modules broken
       by Test2 fall into this category.
       The Fix
       The fix is to remove all Test::Builder1.5/2 related code. Either use
       the legacy Test::Builder API, or use Test2 directly.
   Replacing the Test::Builder singleton
       The Problem
       Some test modules would replace the Test::Builder singleton instance
       with their own instance or subclass. This was usually done to intercept
       or modify results as they happened.
       The Test::Builder singleton is now a simple compatibility wrapper
       around Test2. The Test::Builder singleton is no longer the central
       place for results. Many results bypass the Test::Builder singleton
       completely, which breaks and behavior intended when replacing the
       singleton.
       The Fix
       If you simply want to intercept all results instead of letting them go
       to TAP, you should look at the Test2::API docs and read about pushing a
       new hub onto the hub stack. Replacing the hub temporarily is now the
       correct way to intercept results.
       If your goal is purely monitoring of events use the
       "Test2::Hub->listen()" method exported by Test::More to watch events as
       they are fired. If you wish to modify results before they go to TAP
       look at the "Test2::Hub->filter()" method.
   Directly Accessing Hash Elements
       The Problem
       Some modules look directly at hash keys on the Test::Builder singleton.
       The problem here is that the Test::Builder singleton no longer holds
       anything important.
       The Fix
       The fix is to use the API specified in Test2::API to look at or modify
       state as needed.
   Subtest indentation
       The Problem
       An early change, in fact the change that made Test2 an idea, was a
       change to the indentation of the subtest note. IT was decided it would
       be more readable to outdent the subtest note instead of having it
       inline with the subtest:
           # subtest foo
               ok 1 - blah
               1..1
           ok 1 - subtest foo
       The old style indented the note:
               # subtest foo
               ok 1 - blah
               1..1
           ok 1 - subtest foo
       This breaks tests that do string comparison of TAP output.
       The Fix
           my $indent = $INC{'Test2/API.pm'} ? '' : '    ';
           is(
               $subtest_output,
               "${indent}# subtest foo",
               "Got subtest note"
           );
       Check if $INC{'Test2/API.pm'} is set, if it is then no indentation
       should be expected. If it is not set than the old Test::Builder is in
       use, indentation should be expected.
DISTRIBUTIONS THAT BREAK OR NEED TO BE UPGRADED
       This is a list of cpan modules that have been known to have been broken
       by the upgrade at one point.
   WORKS BUT TESTS WILL FAIL
       These modules still function correctly, but their test suites will not
       pass. If you already have these modules installed then you can continue
       to use them. If you are trying to install them after upgrading
       Test::Builder you will need to force installation, or bypass the broken
       tests.
       Test::DBIx::Class::Schema
           This module has a test that appears to work around a Test::Builder
           bug. The bug appears to have been fixed by Test2, which means the
           workaround causes a failure. This can be easily updated, but nobody
           has done so yet.
           Known broken in versions: 1.0.9 and older
       Test::Kit
           This actually works fine, but will not install because
           Test::Aggregate is in the dependency chain.
           See the Test::Aggregate info below for additional information.
       Device::Chip
           Tests break due to subtest indentation.
           Known broken in version 0.07. Apparently works fine in 0.06 though.
           Patch has been submitted to fix the issue.
   UPGRADE SUGGESTED
       These are modules that did not break, but had broken test suites that
       have since been fixed.
       Test::Exception
           Old versions work fine, but have a minor test name behavior that
           breaks with Test2. Old versions will no longer install because of
           this. The latest version on CPAN will install just fine. Upgrading
           is not required, but is recommended.
           Fixed in version: 0.43
       Data::Peek
           Some tests depended on $! and $? being modified in subtle ways. A
           patch was applied to correct things that changed.
           The module itself works fine, there is no need to upgrade.
           Fixed in version: 0.45
       circular::require
           Some tests were fragile and required base.pm to be loaded at a late
           stage.  Test2 was loading base.pm too early. The tests were updated
           to fix this.
           The module itself never broke, you do not need to upgrade.
           Fixed in version: 0.12
       Test::Module::Used
           A test worked around a now-fixed planning bug. There is no need to
           upgrade if you have an old version installed. New versions install
           fine if you want them.
           Fixed in version: 0.2.5
       Test::Moose::More
           Some tests were fragile, but have been fixed. The actual breakage
           was from the subtest comment indentation change.
           No need to upgrade, old versions work fine. Only new versions will
           install.
           Fixed in version: 0.025
       Test::FITesque
           This was broken by a bugfix to how planning is done. The test was
           updated after the bugfix.
           Fixed in version: 0.04
       autouse
           A test broke because it depended on Scalar::Util not being loaded.
           Test2 loads Scalar::Util. The test was updated to load Test2 after
           checking Scalar::Util's load status.
           There is no need to upgrade if you already have it installed.
           Fixed in version: 1.11
   NEED TO UPGRADE
       Test::SharedFork
           Old versions need to directly access Test::Builder singleton hash
           elements. The latest version on CPAN will still do this on old
           Test::Builder, but will defer to Test2::IPC on Test2.
           Fixed in version: 0.35
       Test::Builder::Clutch
           This works by doing overriding methods on the singleton, and
           directly accessing hash values on the singleton. A new version has
           been released that uses the Test2 API to accomplish the same result
           in a saner way.
           Fixed in version: 0.07
       Test::Dist::VersionSync
           This had Test::Builder2 conditionals. This was fixed by removing
           the conditionals.
           Fixed in version: 1.1.4
       Test::Modern
           This relied on "Test::Builder->_try()" which was a private method,
           documented as something nobody should use. This was fixed by using
           a different tool.
           Fixed in version: 0.012
       Test::UseAllModules
           Version 0.14 relied on "Test::Builder->history" which was available
           in Test::Builder 1.5. Versions 0.12 and 0.13 relied on other
           Test::Builder internals.
           Fixed in version: 0.15
       Test::More::Prefix
           Worked by applying a role that wrapped
           "Test::Builder->_print_comment".  Fixed by adding an event filter
           that modifies the message instead when running under Test2.
           Fixed in version: 0.007
   STILL BROKEN
       Test::Aggregate
           This distribution directly accesses the hash keys in the
           Test::Builder singleton. It also approaches the problem from the
           wrong angle, please consider using Test2::Harness or App::ForkProve
           which both solve the same problem at the harness level.
           Still broken as of version: 0.373
       Test::Wrapper
           This module directly uses hash keys in the Test::Builder singleton.
           This module is also obsolete thanks to the benefits of Test2. Use
           "intercept()" from Test2::API to achieve a similar result.
           Still broken as of version: 0.3.0
       Test::ParallelSubtest
           This module overrides "Test::Builder::subtest()" and
           "Test::Builder::done_testing()". It also directly accesses hash
           elements of the singleton. It has not yet been fixed.
           Alternatives: Test2::AsyncSubtest and Test2::Workflow (not stable).
           Still broken as of version: 0.05
       Test::Pretty
           See https://github.com/tokuhirom/Test-Pretty/issues/25
           The author admits the module is crazy, and he is awaiting a stable
           release of something new (Test2) to completely rewrite it in a sane
           way.
           Still broken as of version: 0.32
       Net::BitTorrent
           The tests for this module directly access Test::Builder hash keys.
           Most, if not all of these hash keys have public API methods that
           could be used instead to avoid the problem.
           Still broken in version: 0.052
       Test::Group
           It monkeypatches Test::Builder, and calls it "black magic" in the
           code.
           Still broken as of version: 0.20
       Test::Flatten
           This modifies the Test::Builder internals in many ways. A better
           was to accomplish the goal of this module is to write your own
           subtest function.
           Still broken as of version: 0.11
       Log::Dispatch::Config::TestLog
           Modifies Test::Builder internals.
           Still broken as of version: 0.02
       Test::Able
           Modifies Test::Builder internals.
           Still broken as of version: 0.11
MAKE ASSERTIONS -> SEND EVENTS
   LEGACY
           use Test::Builder;
           # A majority of tools out there do this:
           # my $TB = Test::Builder->new;
           # This works, but has always been wrong, forcing Test::Builder to implement
           # subtests as a horrific hack. It also causes problems for tools that try
           # to replace the singleton (also discouraged).
           sub my_ok($;$) {
               my ($bool, $name) = @_;
               my $TB = Test::Builder->new;
               $TB->ok($bool, $name);
           }
           sub my_diag($) {
               my ($msg) = @_;
               my $TB = Test::Builder->new;
               $TB->diag($msg);
           }
   TEST2
           use Test2::API qw/context/;
           sub my_ok($;$) {
               my ($bool, $name) = @_;
               my $ctx = context();
               $ctx->ok($bool, $name);
               $ctx->release;
           }
           sub my_diag($) {
               my ($msg) = @_;
               my $ctx = context();
               $ctx->diag($msg);
               $ctx->release;
           }
       The context object has API compatible implementations of the following
       methods:
       ok($bool, $name)
       diag(@messages)
       note(@messages)
       subtest($name, $code)
       If you are looking for helpers with "is", "like", and others, see
       Test2::Suite.
WRAP EXISTING TOOLS
   LEGACY
           use Test::More;
           sub exclusive_ok {
               my ($bool1, $bool2, $name) = @_;
               # Ensure errors are reported 1 level higher
               local $Test::Builder::Level = $Test::Builder::Level + 1;
               $ok = $bool1 || $bool2;
               $ok &&= !($bool1 && $bool2);
               ok($ok, $name);
               return $bool;
           }
       Every single tool in the chain from this, to "ok", to anything "ok"
       calls needs to increment the $Level variable. When an error occurs
       Test::Builder will do a trace to the stack frame determined by $Level,
       and report that file+line as the one where the error occurred. If you
       or any other tool you use forgets to set $Level then errors will be
       reported to the wrong place.
   TEST2
           use Test::More;
           sub exclusive_ok {
               my ($bool1, $bool2, $name) = @_;
               # Grab and store the context, even if you do not need to use it
               # directly.
               my $ctx = context();
               $ok = $bool1 || $bool2;
               $ok &&= !($bool1 && $bool2);
               ok($ok, $name);
               $ctx->release;
               return $bool;
           }
       Instead of using $Level to perform a backtrace, Test2 uses a context
       object. In this sample you create a context object and store it. This
       locks the context (errors report 1 level up from here) for all wrapped
       tools to find. You do not need to use the context object, but you do
       need to store it in a variable. Once the sub ends the $ctx variable is
       destroyed which lets future tools find their own.
USING UTF8
   LEGACY
           # Set the mode BEFORE anything loads Test::Builder
           use open ':std', ':encoding(utf8)';
           use Test::More;
       Or
           # Modify the filehandles
           my $builder = Test::More->builder;
           binmode $builder->output,         ":encoding(utf8)";
           binmode $builder->failure_output, ":encoding(utf8)";
           binmode $builder->todo_output,    ":encoding(utf8)";
   TEST2
           use Test2::API qw/test2_stack/;
           test2_stack->top->format->encoding('utf8');
       Though a much better way is to use the Test2::Plugin::UTF8 plugin,
       which is part of Test2::Suite.
AUTHORS, CONTRIBUTORS AND REVIEWERS
       The following people have all contributed to this document in some way,
       even if only for review.
       Chad Granum (EXODIST) <exodist AT cpan.org>
SOURCE
       The source code repository for Test2 can be found at
       http://github.com/Test-More/test-more/.
MAINTAINER
       Chad Granum <exodist AT cpan.org>
COPYRIGHT
       Copyright 2019 Chad Granum <exodist AT cpan.org>.
       This program is free software; you can redistribute it and/or modify it
       under the same terms as Perl itself.
       See http://www.perl.com/perl/misc/Artistic.html

perl v5.16.3                      2019-09-06              Test2::Transition(3)