PERLWIN32(feed) - phpMan

PERLWIN32(1)           Perl Programmers Reference Guide           PERLWIN32(1)

NAME
       perlwin32 - Perl under Windows
SYNOPSIS
       These are instructions for building Perl under Windows 2000 and later.
DESCRIPTION
       Before you start, you should glance through the README file found in
       the top-level directory to which the Perl distribution was extracted.
       Make sure you read and understand the terms under which this software
       is being distributed.
       Also make sure you read "BUGS AND CAVEATS" below for the known
       limitations of this port.
       The INSTALL file in the perl top-level has much information that is
       only relevant to people building Perl on Unix-like systems.  In
       particular, you can safely ignore any information that talks about
       "Configure".
       You may also want to look at one other option for building a perl that
       will work on Windows: the README.cygwin file, which give a different
       set of rules to build a perl for Windows.  This method will probably
       enable you to build a more Unix-compatible perl, but you will also need
       to download and use various other build-time and run-time support
       software described in that file.
       This set of instructions is meant to describe a so-called "native" port
       of Perl to the Windows platform.  This includes both 32-bit and 64-bit
       Windows operating systems.  The resulting Perl requires no additional
       software to run (other than what came with your operating system).
       Currently, this port is capable of using one of the following compilers
       on the Intel x86 architecture:
             Microsoft Visual C++    version 6.0 or later
             Gcc by mingw.org        gcc version 3.2 or later
             Gcc by mingw-w64.sf.net gcc version 4.4.3 or later
       Note that the last two of these are actually competing projects both
       delivering complete gcc toolchain for MS Windows:
       <http://mingw.org>;
           Delivers gcc toolchain targeting 32-bit Windows platform.
       http://mingw-w64.sf.net <http://mingw-w64.sf.net>;
           Delivers gcc toolchain targeting both 64-bit Windows and 32-bit
           Windows platforms (despite the project name "mingw-w64" they are
           not only 64-bit oriented). They deliver the native gcc compilers
           and cross-compilers that are also supported by perl's makefile.
       The Microsoft Visual C++ compilers are also now being given away free.
       They are available as "Visual C++ Toolkit 2003" or "Visual C++
       2005/2008/2010 Express Edition" (and also as part of the ".NET
       Framework SDK") and are the same compilers that ship with "Visual C++
       .NET 2003 Professional" or "Visual C++ 2005/2008/2010 Professional"
       respectively.
       This port can also be built on IA64/AMD64 using:
             Microsoft Platform SDK    Nov 2001 (64-bit compiler and tools)
             MinGW64 compiler (gcc version 4.4.3 or later)
       The Windows SDK can be downloaded from <http://www.microsoft.com/>;.
       The MinGW64 compiler is available at
       http://sourceforge.net/projects/mingw-w64
       <http://sourceforge.net/projects/mingw-w64>;.  The latter is actually a
       cross-compiler targeting Win64. There's also a trimmed down compiler
       (no java, or gfortran) suitable for building perl available at:
       <http://strawberryperl.com/package/kmx/64_gcctoolchain/>;
       NOTE: If you're using a 32-bit compiler to build perl on a 64-bit
       Windows operating system, then you should set the WIN64 environment
       variable to "undef".  Also, the trimmed down compiler only passes tests
       when USE_ITHREADS *= define (as opposed to undef) and when the CFG *=
       Debug line is commented out.
       This port fully supports MakeMaker (the set of modules that is used to
       build extensions to perl).  Therefore, you should be able to build and
       install most extensions found in the CPAN sites.  See "Usage Hints for
       Perl on Windows" below for general hints about this.
   Setting Up Perl on Windows
       Make
           You need a "make" program to build the sources.  If you are using
           Visual C++ or the Windows SDK tools, nmake will work.  Builds using
           the gcc need dmake.
           dmake is a freely available make that has very nice macro features
           and parallelability.
           A port of dmake for Windows is available from:
           <http://search.cpan.org/dist/dmake/>;
           Fetch and install dmake somewhere on your path.
       Command Shell
           Use the default "cmd" shell that comes with Windows.  Some versions
           of the popular 4DOS/NT shell have incompatibilities that may cause
           you trouble.  If the build fails under that shell, try building
           again with the cmd shell.
           Make sure the path to the build directory does not contain spaces.
           The build usually works in this circumstance, but some tests will
           fail.
       Microsoft Visual C++
           The nmake that comes with Visual C++ will suffice for building.
           You will need to run the VCVARS32.BAT file, usually found somewhere
           like C:\Program Files\Microsoft Visual Studio\VC98\Bin.  This will
           set your build environment.
           You can also use dmake to build using Visual C++; provided,
           however, you set OSRELEASE to "microsft" (or whatever the directory
           name under which the Visual C dmake configuration lives) in your
           environment and edit win32/config.vc to change "make=nmake" into
           "make=dmake".  The latter step is only essential if you want to use
           dmake as your default make for building extensions using MakeMaker.
       Microsoft Visual C++ 2008/2010 Express Edition
           These free versions of Visual C++ 2008/2010 Professional contain
           the same compilers and linkers that ship with the full versions,
           and also contain everything necessary to build Perl, rather than
           requiring a separate download of the Windows SDK like previous
           versions did.
           These packages can be downloaded by searching in the Download
           Center at
           <http://www.microsoft.com/downloads/search.aspx?displaylang=en>;.
           (Providing exact links to these packages has proven a pointless
           task because the links keep on changing so often.)
           Install Visual C++ 2008/2010 Express, then setup your environment
           using, e.g.
                   C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\vsvars32.bat
           (assuming the default installation location was chosen).
           Perl should now build using the win32/Makefile.  You will need to
           edit that file to set CCTYPE to MSVC90FREE or MSVC100FREE first.
       Microsoft Visual C++ 2005 Express Edition
           This free version of Visual C++ 2005 Professional contains the same
           compiler and linker that ship with the full version, but doesn't
           contain everything necessary to build Perl.
           You will also need to download the "Windows SDK" (the "Core SDK"
           and "MDAC SDK" components are required) for more header files and
           libraries.
           These packages can both be downloaded by searching in the Download
           Center at
           <http://www.microsoft.com/downloads/search.aspx?displaylang=en>;.
           (Providing exact links to these packages has proven a pointless
           task because the links keep on changing so often.)
           Try to obtain the latest version of the Windows SDK.  Sometimes
           these packages contain a particular Windows OS version in their
           name, but actually work on other OS versions too.  For example, the
           "Windows Server 2003 R2 Platform SDK" also runs on Windows XP SP2
           and Windows 2000.
           Install Visual C++ 2005 first, then the Platform SDK.  Setup your
           environment as follows (assuming default installation locations
           were chosen):
                   SET PlatformSDKDir=C:\Program Files\Microsoft Platform SDK
                   SET PATH=%SystemRoot%\system32;%SystemRoot%;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE;C:\Program Files\Microsoft Visual Studio 8\VC\BIN;C:\Program Files\Microsoft Visual Studio 8\Common7\Tools;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\bin;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\Program Files\Microsoft Visual Studio 8\VC\VCPackages;%PlatformSDKDir%\Bin
                   SET INCLUDE=C:\Program Files\Microsoft Visual Studio 8\VC\INCLUDE;%PlatformSDKDir%\include
                   SET LIB=C:\Program Files\Microsoft Visual Studio 8\VC\LIB;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\lib;%PlatformSDKDir%\lib
                   SET LIBPATH=C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727
           (The PlatformSDKDir might need to be set differently depending on
           which version you are using. Earlier versions installed into
           "C:\Program Files\Microsoft SDK", while the latest versions install
           into version-specific locations such as "C:\Program Files\Microsoft
           Platform SDK for Windows Server 2003 R2".)
           Perl should now build using the win32/Makefile.  You will need to
           edit that file to set
                   CCTYPE = MSVC80FREE
           and to set CCHOME, CCINCDIR and CCLIBDIR as per the environment
           setup above.
       Microsoft Visual C++ Toolkit 2003
           This free toolkit contains the same compiler and linker that ship
           with Visual C++ .NET 2003 Professional, but doesn't contain
           everything necessary to build Perl.
           You will also need to download the "Platform SDK" (the "Core SDK"
           and "MDAC SDK" components are required) for header files, libraries
           and rc.exe, and ".NET Framework SDK" for more libraries and
           nmake.exe.  Note that the latter (which also includes the free
           compiler and linker) requires the ".NET Framework Redistributable"
           to be installed first.  This can be downloaded and installed
           separately, but is included in the "Visual C++ Toolkit 2003"
           anyway.
           These packages can all be downloaded by searching in the Download
           Center at
           <http://www.microsoft.com/downloads/search.aspx?displaylang=en>;.
           (Providing exact links to these packages has proven a pointless
           task because the links keep on changing so often.)
           Try to obtain the latest version of the Windows SDK.  Sometimes
           these packages contain a particular Windows OS version in their
           name, but actually work on other OS versions too.  For example, the
           "Windows Server 2003 R2 Platform SDK" also runs on Windows XP SP2
           and Windows 2000.
           Install the Toolkit first, then the Platform SDK, then the .NET
           Framework SDK.  Setup your environment as follows (assuming default
           installation locations were chosen):
                   SET PlatformSDKDir=C:\Program Files\Microsoft Platform SDK
                   SET PATH=%SystemRoot%\system32;%SystemRoot%;C:\Program Files\Microsoft Visual C++ Toolkit 2003\bin;%PlatformSDKDir%\Bin;C:\Program Files\Microsoft.NET\SDK\v1.1\Bin
                   SET INCLUDE=C:\Program Files\Microsoft Visual C++ Toolkit 2003\include;%PlatformSDKDir%\include;C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include
                   SET LIB=C:\Program Files\Microsoft Visual C++ Toolkit 2003\lib;%PlatformSDKDir%\lib;C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\lib
           (The PlatformSDKDir might need to be set differently depending on
           which version you are using. Earlier versions installed into
           "C:\Program Files\Microsoft SDK", while the latest versions install
           into version-specific locations such as "C:\Program Files\Microsoft
           Platform SDK for Windows Server 2003 R2".)
           Several required files will still be missing:
           o   cvtres.exe is required by link.exe when using a .res file.  It
               is actually installed by the .NET Framework SDK, but into a
               location such as the following:
                       C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322
               Copy it from there to %PlatformSDKDir%\Bin
           o   lib.exe is normally used to build libraries, but link.exe with
               the /lib option also works, so change win32/config.vc to use it
               instead:
               Change the line reading:
                       ar='lib'
               to:
                       ar='link /lib'
               It may also be useful to create a batch file called lib.bat in
               C:\Program Files\Microsoft Visual C++ Toolkit 2003\bin
               containing:
                       @echo off
                       link /lib %*
               for the benefit of any naughty C extension modules that you
               might want to build later which explicitly reference "lib"
               rather than taking their value from $Config{ar}.
           o   setargv.obj is required to build perlglob.exe (and perl.exe if
               the USE_SETARGV option is enabled).  The Platform SDK supplies
               this object file in source form in %PlatformSDKDir%\src\crt.
               Copy setargv.c, cruntime.h and internal.h from there to some
               temporary location and build setargv.obj using
                       cl.exe /c /I. /D_CRTBLD setargv.c
               Then copy setargv.obj to %PlatformSDKDir%\lib
               Alternatively, if you don't need perlglob.exe and don't need to
               enable the USE_SETARGV option then you can safely just remove
               all mention of $(GLOBEXE) from win32/Makefile and setargv.obj
               won't be required anyway.
           Perl should now build using the win32/Makefile.  You will need to
           edit that file to set
                   CCTYPE = MSVC70FREE
           and to set CCHOME, CCINCDIR and CCLIBDIR as per the environment
           setup above.
       Microsoft Platform SDK 64-bit Compiler
           The nmake that comes with the Platform SDK will suffice for
           building Perl.  Make sure you are building within one of the "Build
           Environment" shells available after you install the Platform SDK
           from the Start Menu.
       MinGW release 3 with gcc
           Perl can be compiled with gcc from MinGW release 3 and later (using
           gcc 3.2.x and later).  It can be downloaded here:
           <http://www.mingw.org/>;
           You also need dmake.  See "Make" above on how to get it.
   Building
       o   Make sure you are in the "win32" subdirectory under the perl
           toplevel.  This directory contains a "Makefile" that will work with
           versions of nmake that come with Visual C++ or the Windows SDK, and
           a dmake "makefile.mk" that will work for all supported compilers.
           The defaults in the dmake makefile are setup to build using
           MinGW/gcc.
       o   Edit the makefile.mk (or Makefile, if you're using nmake) and
           change the values of INST_DRV and INST_TOP.   You can also enable
           various build flags.  These are explained in the makefiles.
           Note that it is generally not a good idea to try to build a perl
           with INST_DRV and INST_TOP set to a path that already exists from a
           previous build.  In particular, this may cause problems with the
           lib/ExtUtils/t/Embed.t test, which attempts to build a test program
           and may end up building against the installed perl's lib/CORE
           directory rather than the one being tested.
           You will have to make sure that CCTYPE is set correctly and that
           CCHOME points to wherever you installed your compiler.
           If building with the cross-compiler provided by
           mingw-w64.sourceforge.net you'll need to uncomment the line that
           sets GCCCROSS in the makefile.mk. Do this only if it's the cross-
           compiler - ie only if the bin folder doesn't contain a gcc.exe.
           (The cross-compiler does not provide a gcc.exe, g++.exe, ar.exe,
           etc. Instead, all of these executables are prefixed with
           'x86_64-w64-mingw32-'.)
           The default value for CCHOME in the makefiles for Visual C++ may
           not be correct for some versions.  Make sure the default exists and
           is valid.
           You may also need to comment out the "DELAYLOAD = ..." line in the
           Makefile if you're using VC++ 6.0 without the latest service pack
           and the linker reports an internal error.
           If you want build some core extensions statically into perl's dll,
           specify them in the STATIC_EXT macro.
           Be sure to read the instructions near the top of the makefiles
           carefully.
       o   Type "dmake" (or "nmake" if you are using that make).
           This should build everything.  Specifically, it will create
           perl.exe, perl516.dll at the perl toplevel, and various other
           extension dll's under the lib\auto directory.  If the build fails
           for any reason, make sure you have done the previous steps
           correctly.
   Testing Perl on Windows
       Type "dmake test" (or "nmake test").  This will run most of the tests
       from the testsuite (many tests will be skipped).
       There should be no test failures.
       Some test failures may occur if you use a command shell other than the
       native "cmd.exe", or if you are building from a path that contains
       spaces.  So don't do that.
       If you are running the tests from a emacs shell window, you may see
       failures in op/stat.t.  Run "dmake test-notty" in that case.
       If you run the tests on a FAT partition, you may see some failures for
       "link()" related tests (op/write.t, op/stat.t ...). Testing on NTFS
       avoids these errors.
       Furthermore, you should make sure that during "make test" you do not
       have any GNU tool packages in your path: some toolkits like Unixutils
       include some tools ("type" for instance) which override the Windows
       ones and makes tests fail. Remove them from your path while testing to
       avoid these errors.
       Please report any other failures as described under "BUGS AND CAVEATS".
   Installation of Perl on Windows
       Type "dmake install" (or "nmake install").  This will put the newly
       built perl and the libraries under whatever "INST_TOP" points to in the
       Makefile.  It will also install the pod documentation under
       "$INST_TOP\$INST_VER\lib\pod" and HTML versions of the same under
       "$INST_TOP\$INST_VER\lib\pod\html".
       To use the Perl you just installed you will need to add a new entry to
       your PATH environment variable: "$INST_TOP\bin", e.g.
           set PATH=c:\perl\bin;%PATH%
       If you opted to uncomment "INST_VER" and "INST_ARCH" in the makefile
       then the installation structure is a little more complicated and you
       will need to add two new PATH components instead:
       "$INST_TOP\$INST_VER\bin" and "$INST_TOP\$INST_VER\bin\$ARCHNAME", e.g.
           set PATH=c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH%
   Usage Hints for Perl on Windows
       Environment Variables
           The installation paths that you set during the build get compiled
           into perl, so you don't have to do anything additional to start
           using that perl (except add its location to your PATH variable).
           If you put extensions in unusual places, you can set PERL5LIB to a
           list of paths separated by semicolons where you want perl to look
           for libraries.  Look for descriptions of other environment
           variables you can set in perlrun.
           You can also control the shell that perl uses to run system() and
           backtick commands via PERL5SHELL.  See perlrun.
           Perl does not depend on the registry, but it can look up certain
           default values if you choose to put them there.  Perl attempts to
           read entries from "HKEY_CURRENT_USER\Software\Perl" and
           "HKEY_LOCAL_MACHINE\Software\Perl".  Entries in the former override
           entries in the latter.  One or more of the following entries (of
           type REG_SZ or REG_EXPAND_SZ) may be set:
               lib-$]              version-specific standard library path to add to @INC
               lib                 standard library path to add to @INC
               sitelib-$]          version-specific site library path to add to @INC
               sitelib             site library path to add to @INC
               vendorlib-$]        version-specific vendor library path to add to @INC
               vendorlib           vendor library path to add to @INC
               PERL*               fallback for all %ENV lookups that begin with "PERL"
           Note the $] in the above is not literal.  Substitute whatever
           version of perl you want to honor that entry, e.g. 5.6.0.  Paths
           must be separated with semicolons, as usual on Windows.
       File Globbing
           By default, perl handles file globbing using the File::Glob
           extension, which provides portable globbing.
           If you want perl to use globbing that emulates the quirks of DOS
           filename conventions, you might want to consider using
           File::DosGlob to override the internal glob() implementation.  See
           File::DosGlob for details.
       Using perl from the command line
           If you are accustomed to using perl from various command-line
           shells found in UNIX environments, you will be less than pleased
           with what Windows offers by way of a command shell.
           The crucial thing to understand about the Windows environment is
           that the command line you type in is processed twice before Perl
           sees it.  First, your command shell (usually CMD.EXE) preprocesses
           the command line, to handle redirection, environment variable
           expansion, and location of the executable to run. Then, the perl
           executable splits the remaining command line into individual
           arguments, using the C runtime library upon which Perl was built.
           It is particularly important to note that neither the shell nor the
           C runtime do any wildcard expansions of command-line arguments (so
           wildcards need not be quoted).  Also, the quoting behaviours of the
           shell and the C runtime are rudimentary at best (and may, if you
           are using a non-standard shell, be inconsistent).  The only
           (useful) quote character is the double quote (").  It can be used
           to protect spaces and other special characters in arguments.
           The Windows documentation describes the shell parsing rules here:
           http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/cmd.mspx?mfr=true
           <http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-
           us/cmd.mspx?mfr=true> and the C runtime parsing rules here:
           http://msdn.microsoft.com/en-us/library/17w5ykft%28v=VS.100%29.aspx
           <http://msdn.microsoft.com/en-
           us/library/17w5ykft%28v=VS.100%29.aspx>.
           Here are some further observations based on experiments: The C
           runtime breaks arguments at spaces and passes them to programs in
           argc/argv.  Double quotes can be used to prevent arguments with
           spaces in them from being split up.  You can put a double quote in
           an argument by escaping it with a backslash and enclosing the whole
           argument within double quotes.  The backslash and the pair of
           double quotes surrounding the argument will be stripped by the C
           runtime.
           The file redirection characters "<", ">", and "|" can be quoted by
           double quotes (although there are suggestions that this may not
           always be true).  Single quotes are not treated as quotes by the
           shell or the C runtime, they don't get stripped by the shell (just
           to make this type of quoting completely useless).  The caret "^"
           has also been observed to behave as a quoting character, but this
           appears to be a shell feature, and the caret is not stripped from
           the command line, so Perl still sees it (and the C runtime phase
           does not treat the caret as a quote character).
           Here are some examples of usage of the "cmd" shell:
           This prints two doublequotes:
               perl -e "print '\"\"' "
           This does the same:
               perl -e "print \"\\\"\\\"\" "
           This prints "bar" and writes "foo" to the file "blurch":
               perl -e "print 'foo'; print STDERR 'bar'" > blurch
           This prints "foo" ("bar" disappears into nowhereland):
               perl -e "print 'foo'; print STDERR 'bar'" 2> nul
           This prints "bar" and writes "foo" into the file "blurch":
               perl -e "print 'foo'; print STDERR 'bar'" 1> blurch
           This pipes "foo" to the "less" pager and prints "bar" on the
           console:
               perl -e "print 'foo'; print STDERR 'bar'" | less
           This pipes "foo\nbar\n" to the less pager:
               perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less
           This pipes "foo" to the pager and writes "bar" in the file
           "blurch":
               perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less
           Discovering the usefulness of the "command.com" shell on Windows 9x
           is left as an exercise to the reader :)
           One particularly pernicious problem with the 4NT command shell for
           Windows is that it (nearly) always treats a % character as
           indicating that environment variable expansion is needed.  Under
           this shell, it is therefore important to always double any %
           characters which you want Perl to see (for example, for hash
           variables), even when they are quoted.
       Building Extensions
           The Comprehensive Perl Archive Network (CPAN) offers a wealth of
           extensions, some of which require a C compiler to build.  Look in
           <http://www.cpan.org/>; for more information on CPAN.
           Note that not all of the extensions available from CPAN may work in
           the Windows environment; you should check the information at
           <http://testers.cpan.org/>; before investing too much effort into
           porting modules that don't readily build.
           Most extensions (whether they require a C compiler or not) can be
           built, tested and installed with the standard mantra:
               perl Makefile.PL
               $MAKE
               $MAKE test
               $MAKE install
           where $MAKE is whatever 'make' program you have configured perl to
           use.  Use "perl -V:make" to find out what this is.  Some extensions
           may not provide a testsuite (so "$MAKE test" may not do anything or
           fail), but most serious ones do.
           It is important that you use a supported 'make' program, and ensure
           Config.pm knows about it.  If you don't have nmake, you can either
           get dmake from the location mentioned earlier or get an old version
           of nmake reportedly available from:
           http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe
           <http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-
           US/nmake15.exe>
           Another option is to use the make written in Perl, available from
           CPAN.
           http://www.cpan.org/modules/by-module/Make/
           <http://www.cpan.org/modules/by-module/Make/>;
           You may also use dmake.  See "Make" above on how to get it.
           Note that MakeMaker actually emits makefiles with different syntax
           depending on what 'make' it thinks you are using.  Therefore, it is
           important that one of the following values appears in Config.pm:
               make='nmake'        # MakeMaker emits nmake syntax
               make='dmake'        # MakeMaker emits dmake syntax
               any other value     # MakeMaker emits generic make syntax
                                       (e.g GNU make, or Perl make)
           If the value doesn't match the 'make' program you want to use, edit
           Config.pm to fix it.
           If a module implements XSUBs, you will need one of the supported C
           compilers.  You must make sure you have set up the environment for
           the compiler for command-line compilation.
           If a module does not build for some reason, look carefully for why
           it failed, and report problems to the module author.  If it looks
           like the extension building support is at fault, report that with
           full details of how the build failed using the perlbug utility.
       Command-line Wildcard Expansion
           The default command shells on DOS descendant operating systems
           (such as they are) usually do not expand wildcard arguments
           supplied to programs.  They consider it the application's job to
           handle that.  This is commonly achieved by linking the application
           (in our case, perl) with startup code that the C runtime libraries
           usually provide.  However, doing that results in incompatible perl
           versions (since the behavior of the argv expansion code differs
           depending on the compiler, and it is even buggy on some compilers).
           Besides, it may be a source of frustration if you use such a perl
           binary with an alternate shell that *does* expand wildcards.
           Instead, the following solution works rather well. The nice things
           about it are 1) you can start using it right away; 2) it is more
           powerful, because it will do the right thing with a pattern like
           */*/*.c; 3) you can decide whether you do/don't want to use it; and
           4) you can extend the method to add any customizations (or even
           entirely different kinds of wildcard expansion).
                   C:\> copy con c:\perl\lib\Wild.pm
                   # Wild.pm - emulate shell @ARGV expansion on shells that don't
                   use File::DosGlob;
                   @ARGV = map {
                                 my @g = File::DosGlob::glob($_) if /[*?]/;
                                 @g ? @g : $_;
                               } @ARGV;
                   1;
                   ^Z
                   C:\> set PERL5OPT=-MWild
                   C:\> perl -le "for (@ARGV) { print }" */*/perl*.c
                   p4view/perl/perl.c
                   p4view/perl/perlio.c
                   p4view/perl/perly.c
                   perl5.005/win32/perlglob.c
                   perl5.005/win32/perllib.c
                   perl5.005/win32/perlglob.c
                   perl5.005/win32/perllib.c
                   perl5.005/win32/perlglob.c
                   perl5.005/win32/perllib.c
           Note there are two distinct steps there: 1) You'll have to create
           Wild.pm and put it in your perl lib directory. 2) You'll need to
           set the PERL5OPT environment variable.  If you want argv expansion
           to be the default, just set PERL5OPT in your default startup
           environment.
           If you are using the Visual C compiler, you can get the C runtime's
           command line wildcard expansion built into perl binary.  The
           resulting binary will always expand unquoted command lines, which
           may not be what you want if you use a shell that does that for you.
           The expansion done is also somewhat less powerful than the approach
           suggested above.
       Notes on 64-bit Windows
           Windows .NET Server supports the LLP64 data model on the Intel
           Itanium architecture.
           The LLP64 data model is different from the LP64 data model that is
           the norm on 64-bit Unix platforms.  In the former, "int" and "long"
           are both 32-bit data types, while pointers are 64 bits wide.  In
           addition, there is a separate 64-bit wide integral type, "__int64".
           In contrast, the LP64 data model that is pervasive on Unix
           platforms provides "int" as the 32-bit type, while both the "long"
           type and pointers are of 64-bit precision.  Note that both models
           provide for 64-bits of addressability.
           64-bit Windows running on Itanium is capable of running 32-bit x86
           binaries transparently.  This means that you could use a 32-bit
           build of Perl on a 64-bit system.  Given this, why would one want
           to build a 64-bit build of Perl?  Here are some reasons why you
           would bother:
           o   A 64-bit native application will run much more efficiently on
               Itanium hardware.
           o   There is no 2GB limit on process size.
           o   Perl automatically provides large file support when built under
               64-bit Windows.
           o   Embedding Perl inside a 64-bit application.
   Running Perl Scripts
       Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to indicate to
       the OS that it should execute the file using perl.  Windows has no
       comparable means to indicate arbitrary files are executables.
       Instead, all available methods to execute plain text files on Windows
       rely on the file "extension".  There are three methods to use this to
       execute perl scripts:
       1.      There is a facility called "file extension associations".  This
               can be manipulated via the two commands "assoc" and "ftype"
               that come standard with Windows.  Type "ftype /?" for a
               complete example of how to set this up for perl scripts (Say
               what?  You thought Windows wasn't perl-ready? :).
       2.      Since file associations don't work everywhere, and there are
               reportedly bugs with file associations where it does work, the
               old method of wrapping the perl script to make it look like a
               regular batch file to the OS, may be used.  The install process
               makes available the "pl2bat.bat" script which can be used to
               wrap perl scripts into batch files.  For example:
                       pl2bat foo.pl
               will create the file "FOO.BAT".  Note "pl2bat" strips any .pl
               suffix and adds a .bat suffix to the generated file.
               If you use the 4DOS/NT or similar command shell, note that
               "pl2bat" uses the "%*" variable in the generated batch file to
               refer to all the command line arguments, so you may need to
               make sure that construct works in batch files.  As of this
               writing, 4DOS/NT users will need a "ParameterChar = *"
               statement in their 4NT.INI file or will need to execute "setdos
               /p*" in the 4DOS/NT startup file to enable this to work.
       3.      Using "pl2bat" has a few problems:  the file name gets changed,
               so scripts that rely on $0 to find what they must do may not
               run properly; running "pl2bat" replicates the contents of the
               original script, and so this process can be maintenance
               intensive if the originals get updated often.  A different
               approach that avoids both problems is possible.
               A script called "runperl.bat" is available that can be copied
               to any filename (along with the .bat suffix).  For example, if
               you call it "foo.bat", it will run the file "foo" when it is
               executed.  Since you can run batch files on Windows platforms
               simply by typing the name (without the extension), this
               effectively runs the file "foo", when you type either "foo" or
               "foo.bat".  With this method, "foo.bat" can even be in a
               different location than the file "foo", as long as "foo" is
               available somewhere on the PATH.  If your scripts are on a
               filesystem that allows symbolic links, you can even avoid
               copying "runperl.bat".
               Here's a diversion:  copy "runperl.bat" to "runperl", and type
               "runperl".  Explain the observed behavior, or lack thereof. :)
               Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH
   Miscellaneous Things
       A full set of HTML documentation is installed, so you should be able to
       use it if you have a web browser installed on your system.
       "perldoc" is also a useful tool for browsing information contained in
       the documentation, especially in conjunction with a pager like "less"
       (recent versions of which have Windows support).  You may have to set
       the PAGER environment variable to use a specific pager.  "perldoc -f
       foo" will print information about the perl operator "foo".
       One common mistake when using this port with a GUI library like "Tk" is
       assuming that Perl's normal behavior of opening a command-line window
       will go away.  This isn't the case.  If you want to start a copy of
       "perl" without opening a command-line window, use the "wperl"
       executable built during the installation process.  Usage is exactly the
       same as normal "perl" on Windows, except that options like "-h" don't
       work (since they need a command-line window to print to).
       If you find bugs in perl, you can run "perlbug" to create a bug report
       (you may have to send it manually if "perlbug" cannot find a mailer on
       your system).
BUGS AND CAVEATS
       Norton AntiVirus interferes with the build process, particularly if set
       to "AutoProtect, All Files, when Opened". Unlike large applications the
       perl build process opens and modifies a lot of files. Having the the
       AntiVirus scan each and every one slows build the process
       significantly.  Worse, with PERLIO=stdio the build process fails with
       peculiar messages as the virus checker interacts badly with
       miniperl.exe writing configure files (it seems to either catch file
       part written and treat it as suspicious, or virus checker may have it
       "locked" in a way which inhibits miniperl updating it). The build does
       complete with
          set PERLIO=perlio
       but that may be just luck. Other AntiVirus software may have similar
       issues.
       Some of the built-in functions do not act exactly as documented in
       perlfunc, and a few are not implemented at all.  To avoid surprises,
       particularly if you have had prior exposure to Perl in other operating
       environments or if you intend to write code that will be portable to
       other environments, see perlport for a reasonably definitive list of
       these differences.
       Not all extensions available from CPAN may build or work properly in
       the Windows environment.  See "Building Extensions".
       Most "socket()" related calls are supported, but they may not behave as
       on Unix platforms.  See perlport for the full list.
       Signal handling may not behave as on Unix platforms (where it doesn't
       exactly "behave", either :).  For instance, calling "die()" or "exit()"
       from signal handlers will cause an exception, since most
       implementations of "signal()" on Windows are severely crippled.  Thus,
       signals may work only for simple things like setting a flag variable in
       the handler.  Using signals under this port should currently be
       considered unsupported.
       Please send detailed descriptions of any problems and solutions that
       you may find to <perlbug AT perl.org>, along with the output produced by
       "perl -V".
ACKNOWLEDGEMENTS
       The use of a camel with the topic of Perl is a trademark of O'Reilly
       and Associates, Inc. Used with permission.
AUTHORS
       Gary Ng <71564.1743 AT CompuServe.COM>
       Gurusamy Sarathy <gsar AT activestate.com>
       Nick Ing-Simmons <nick AT ing-simmons.net>
       Jan Dubois <jand AT activestate.com>
       Steve Hay <steve.m.hay AT googlemail.com>
       This document is maintained by Jan Dubois.
SEE ALSO
       perl
HISTORY
       This port was originally contributed by Gary Ng around 5.003_24, and
       borrowed from the Hip Communications port that was available at the
       time.  Various people have made numerous and sundry hacks since then.
       GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons).
       Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp).
       Support for fork() emulation was added in 5.6 (ActiveState Tool Corp).
       Win9x support was added in 5.6 (Benjamin Stuhl).
       Support for 64-bit Windows added in 5.8 (ActiveState Corp).
       Last updated: 10 September 2011

perl v5.16.3                      2013-03-04                      PERLWIN32(1)