YUM(8) DNF YUM(8)
NAME
yum - redirecting to DNF Command Reference
SYNOPSIS
dnf [options] <command> [<args>...]
DESCRIPTION
DNF is the next upcoming major version of YUM, a package manager for
RPM-based Linux distributions. It roughly maintains CLI compatibility
with YUM and defines a strict API for extensions and plugins.
Plugins can modify or extend features of DNF or provide additional CLI
commands on top of those mentioned below. If you know the name of such
a command (including commands mentioned below), you may find/install
the package which provides it using the appropriate virtual provide in
the form of dnf-command(<alias>), where <alias> is the name of the com-
mand; e.g.``dnf install 'dnf-command(versionlock)'`` installs a ver-
sionlock plugin. This approach also applies to specifying dependencies
of packages that require a particular DNF command.
Return values:
o 0 : Operation was successful.
o 1 : An error occurred, which was handled by dnf.
o 3 : An unknown unhandled error occurred during operation.
o 100: See check-update
o 200: There was a problem with acquiring or releasing of locks.
Available commands:
o alias
o autoremove
o check
o check-update
o clean
o deplist
o distro-sync
o downgrade
o group
o help
o history
o info
o install
o list
o makecache
o mark
o module
o provides
o reinstall
o remove
o repoinfo
o repolist
o repoquery
o repository-packages
o search
o shell
o swap
o updateinfo
o upgrade
o upgrade-minimal
Additional information:
o Options
o Specifying Packages
o Specifying Provides
o Specifying Groups
o Specifying Transactions
o Metadata Synchronization
o Configuration Files Replacement Policy
o Files
o See Also
OPTIONS
-4 Resolve to IPv4 addresses only.
-6 Resolve to IPv6 addresses only.
--advisory=<advisory>, --advisories=<advisory>
Include packages corresponding to the advisory ID, Eg.
FEDORA-2201-123. Applicable for the install, repoquery, update-
info, upgrade and offline-upgrade (dnf-plugins-core) commands.
--allowerasing
Allow erasing of installed packages to resolve dependencies.
This option could be used as an alternative to the yum swap com-
mand where packages to remove are not explicitly defined.
--assumeno
Automatically answer no for all questions.
-b, --best
Try the best available package versions in transactions. Specif-
ically during dnf upgrade, which by default skips over updates
that can not be installed for dependency reasons, the switch
forces DNF to only consider the latest packages. When running
into packages with broken dependencies, DNF will fail giving a
reason why the latest version can not be installed.
--bugfix
Include packages that fix a bugfix issue. Applicable for the
install, repoquery, updateinfo, upgrade and offline-upgrade
(dnf-plugins-core) commands.
--bz=<bugzilla>, --bzs=<bugzilla>
Include packages that fix a Bugzilla ID, Eg. 123123. Applicable
for the install, repoquery, updateinfo, upgrade and off-
line-upgrade (dnf-plugins-core) commands.
-C, --cacheonly
Run entirely from system cache, don't update the cache and use
it even in case it is expired.
DNF uses a separate cache for each user under which it executes.
The cache for the root user is called the system cache. This
switch allows a regular user read-only access to the system
cache, which usually is more fresh than the user's and thus he
does not have to wait for metadata sync.
--color=<color>
Control whether color is used in terminal output. Valid values
are always, never and auto (default).
--comment=<comment>
Add a comment to the transaction history.
-c <config file>, --config=<config file>
Configuration file location.
--cve=<cves>, --cves=<cves>
Include packages that fix a CVE (Common Vulnerabilities and
Exposures) ID (http://cve.mitre.org/about/), Eg. CVE-2201-0123.
Applicable for the install, repoquery, updateinfo, upgrade and
offline-upgrade (dnf-plugins-core) commands.
-d <debug level>, --debuglevel=<debug level>
Debugging output level. This is an integer value between 0 (no
additional information strings) and 10 (shows all debugging
information, even that not understandable to the user), default
is 2. Deprecated, use -v instead.
--debugsolver
Dump data aiding in dependency solver debugging into ./debug-
data.
--disableexcludes=[all|main|<repoid>], --disableexcludep-
kgs=[all|main|<repoid>]
Disable the configuration file excludes. Takes one of the following
three options:
o all, disables all configuration file excludes
o main, disables excludes defined in the [main] section
o repoid, disables excludes defined for the given repository
--disable, --set-disabled
Disable specified repositories (automatically saves). The option
has to be used together with the config-manager command
(dnf-plugins-core).
--disableplugin=<plugin names>
Disable the listed plugins specified by names or globs.
--disablerepo=<repoid>
Disable specific repositories by an id or a glob. This option is
mutually exclusive with --repo.
--downloaddir=<path>, --destdir=<path>
Redirect downloaded packages to provided directory. The option
has to be used together with the --downloadonly command line
option, with the download, modulesync, reposync or sys-
tem-upgrade commands (dnf-plugins-core).
--downloadonly
Download the resolved package set without performing any rpm
transaction (install/upgrade/erase).
Packages are removed after the next successful transaction. This
applies also when used together with --destdir option as the
directory is considered as a part of the DNF cache. To persist
the packages, use the download command instead.
-e <error level>, --errorlevel=<error level>
Error output level. This is an integer value between 0 (no error
output) and 10 (shows all error messages), default is 3. Depre-
cated, use -v instead.
--enable, --set-enabled
Enable specified repositories (automatically saves). The option
has to be used together with the config-manager command
(dnf-plugins-core).
--enableplugin=<plugin names>
Enable the listed plugins specified by names or globs.
--enablerepo=<repoid>
Enable additional repositories by an id or a glob.
--enhancement
Include enhancement relevant packages. Applicable for the
install, repoquery, updateinfo, upgrade and offline-upgrade
(dnf-plugins-core) commands.
-x <package-file-spec>, --exclude=<package-file-spec>
Exclude packages specified by <package-file-spec> from the oper-
ation.
--excludepkgs=<package-file-spec>
Deprecated option. It was replaced by the --exclude option.
--forcearch=<arch>
Force the use of an architecture. Any architecture can be speci-
fied. However, use of an architecture not supported natively by
your CPU will require emulation of some kind. This is usually
through QEMU. The behavior of --forcearch can be configured by
using the arch and ignorearch configuration options with values
<arch> and True respectively.
-h, --help, --help-cmd
Show the help.
--installroot=<path>
Specifies an alternative installroot, relative to where all
packages will be installed. Think of this like doing chroot
<root> dnf, except using --installroot allows dnf to work before
the chroot is created. It requires absolute path.
o cachedir, log files, releasever, and gpgkey are taken from or stored
in the installroot. Gpgkeys are imported into the installroot from a
path relative to the host which can be specified in the repository
section of configuration files.
o configuration file and reposdir are searched inside the installroot
first. If they are not present, they are taken from the host system.
Note: When a path is specified within a command line argument
(--config=<config file> in case of configuration file and
--setopt=reposdir=<reposdir> for reposdir) then this path is always
relative to the host with no exceptions.
o vars are taken from the host system or installroot according to
reposdir installroot. When varsdir paths are specified within a com-
mand line argument (--setopt=varsdir=<reposdir>) then those path are
always relative to the host with no exceptions.
o The pluginpath and pluginconfpath are relative to the host.
Note: You may also want to use the command-line option --relea-
sever=<release> when creating the installroot, otherwise the $relea-
sever value is taken from the rpmdb within the installroot (and thus
it is empty at the time of creation and the transaction will fail).
If --releasever=/ is used, the releasever will be detected from the
host (/) system. The new installroot path at the time of creation
does not contain the repository, releasever and dnf.conf files.
On a modular system you may also want to use the --setopt=mod-
ule_platform_id=<module_platform_name:stream> command-line option
when creating the installroot, otherwise the module_platform_id
value will be taken from the /etc/os-release file within the
installroot (and thus it will be empty at the time of creation, the
modular dependency could be unsatisfied and modules content could be
excluded).
Installroot examples:
dnf --installroot=<installroot> --releasever=<release> install sys-
tem-release
Permanently sets the releasever of the system in the
<installroot> directory to <release>.
dnf --installroot=<installroot> --setopt=reposdir=<path> --config
/path/dnf.conf upgrade
Upgrades packages inside the installroot from a repository
described by --setopt using configuration from
/path/dnf.conf.
--newpackage
Include newpackage relevant packages. Applicable for the
install, repoquery, updateinfo, upgrade and offline-upgrade
(dnf-plugins-core) commands.
--noautoremove
Disable removal of dependencies that are no longer used. It sets
clean_requirements_on_remove configuration option to False.
--nobest
Set best option to False, so that transactions are not limited
to best candidates only.
--nodocs
Do not install documentation. Sets the rpm flag 'RPM-
TRANS_FLAG_NODOCS'.
--nogpgcheck
Skip checking GPG signatures on packages (if RPM policy allows).
--noplugins
Disable all plugins.
--obsoletes
This option has an effect on an install/update, it enables dnf's
obsoletes processing logic. For more information see the obso-
letes option.
This option also displays capabilities that the package obso-
letes when used together with the repoquery command.
Configuration Option: obsoletes
-q, --quiet
In combination with a non-interactive command, shows just the
relevant content. Suppresses messages notifying about the cur-
rent state or actions of DNF.
-R <minutes>, --randomwait=<minutes>
Maximum command wait time.
--refresh
Set metadata as expired before running the command.
--releasever=<release>
Configure DNF as if the distribution release was <release>. This
can affect cache paths, values in configuration files and mir-
rorlist URLs.
--repofrompath <repo>,<path/url>
Specify a repository to add to the repositories for this query.
This option can be used multiple times.
o The repository label is specified by <repo>.
o The path or url to the repository is specified by <path/url>. It is
the same path as a baseurl and can be also enriched by the repo vari-
ables.
o The configuration for the repository can be adjusted using --
-setopt=<repo>.<option>=<value>.
o If you want to view only packages from this repository, combine this
with the --repo=<repo> or --disablerepo="*" switches.
--repo=<repoid>, --repoid=<repoid>
Enable just specific repositories by an id or a glob. Can be
used multiple times with accumulative effect. It is basically a
shortcut for --disablerepo="*" --enablerepo=<repoid> and is
mutually exclusive with the --disablerepo option.
--rpmverbosity=<name>
RPM debug scriptlet output level. Sets the debug level to <name>
for RPM scriptlets. For available levels, see the rpmverbosity
configuration option.
--sec-severity=<severity>, --secseverity=<severity>
Includes packages that provide a fix for an issue of the speci-
fied severity. Applicable for the install, repoquery, update-
info, upgrade and offline-upgrade (dnf-plugins-core) commands.
--security
Includes packages that provide a fix for a security issue.
Applicable for the install, repoquery, updateinfo, upgrade and
offline-upgrade (dnf-plugins-core) commands.
--setopt=<option>=<value>
Override a configuration option from the configuration file. To
override configuration options for repositories, use
repoid.option for the <option>. Values for configuration options
like excludepkgs, includepkgs, installonlypkgs and tsflags are
appended to the original value, they do not override it. How-
ever, specifying an empty value (e.g. --setopt=tsflags=) will
clear the option.
--skip-broken
Resolve depsolve problems by removing packages that are causing
problems from the transaction. It is an alias for the strict
configuration option with value False. Additionally, with the
enable and disable module subcommands it allows one to perform
an action even in case of broken modular dependencies.
--showduplicates
Show duplicate packages in repositories. Applicable for the list
and search commands.
-v, --verbose
Verbose operation, show debug messages.
--version
Show DNF version and exit.
-y, --assumeyes
Automatically answer yes for all questions.
List options are comma-separated. Command-line options override respec-
tive settings from configuration files.
COMMANDS
For an explanation of <package-spec>, <package-file-spec> and <pack-
age-name-spec> see Specifying Packages.
For an explanation of <provide-spec> see Specifying Provides.
For an explanation of <group-spec> see Specifying Groups.
For an explanation of <module-spec> see Specifying Modules.
For an explanation of <transaction-spec> see Specifying Transactions.
Alias Command
Command: alias
Allows the user to define and manage a list of aliases (in the form
<name=value>), which can be then used as dnf commands to abbreviate
longer command sequences. For examples on using the alias command, see
Alias Examples. For examples on the alias processing, see Alias Pro-
cessing Examples.
To use an alias (name=value), the name must be placed as the first
"command" (e.g. the first argument that is not an option). It is then
replaced by its value and the resulting sequence is again searched for
aliases. The alias processing stops when the first found command is not
a name of any alias.
In case the processing would result in an infinite recursion, the orig-
inal arguments are used instead.
Also, like in shell aliases, if the result starts with a \, the alias
processing will stop.
All aliases are defined in configuration files in the
/etc/dnf/aliases.d/ directory in the [aliases] section, and aliases
created by the alias command are written to the USER.conf file. In case
of conflicts, the USER.conf has the highest priority, and alphabetical
ordering is used for the rest of the configuration files.
Optionally, there is the enabled option in the [main] section default-
ing to True. This can be set for each file separately in the respective
file, or globally for all aliases in the ALIASES.conf file.
dnf alias [options] [list] [<name>...]
List aliases with their final result. The [<alias>...] parameter
further limits the result to only those aliases matching it.
dnf alias [options] add <name=value>...
Create new aliases.
dnf alias [options] delete <name>...
Delete aliases.
Alias Examples
dnf alias list
Lists all defined aliases.
dnf alias add rm=remove
Adds a new command alias called rm which works the same as the
remove command.
dnf alias add upgrade="\upgrade --skip-broken --disableexcludes=all
--obsoletes"
Adds a new command alias called upgrade which works the same as
the upgrade command, with additional options. Note that the
original upgrade command is prefixed with a \ to prevent an
infinite loop in alias processing.
Alias Processing Examples
If there are defined aliases in=install and FORCE="--skip-broken --dis-
ableexcludes=all":
o dnf FORCE in will be replaced with dnf --skip-broken --disableex-
cludes=all install
o dnf in FORCE will be replaced with dnf install FORCE (which will
fail)
If there is defined alias in=install:
o dnf in will be replaced with dnf install
o dnf --repo updates in will be replaced with dnf --repo updates in
(which will fail)
Autoremove Command
Command: autoremove
Aliases for explicit NEVRA matching: autoremove-n, autoremove-na, autoremove-nevra
dnf [options] autoremove
Removes all "leaf" packages from the system that were originally
installed as dependencies of user-installed packages, but which are
no longer required by any such package.
Packages listed in installonlypkgs are never automatically removed by
this command.
dnf [options] autoremove <spec>...
This is an alias for the Remove Command command with clean_require-
ments_on_remove set to True. It removes the specified packages from
the system along with any packages depending on the packages being
removed. Each <spec> can be either a <package-spec>, which specifies
a package directly, or a @<group-spec>, which specifies an (environ-
ment) group which contains it. It also removes any dependencies that
are no longer needed.
There are also a few specific autoremove commands autoremove-n,
autoremove-na and autoremove-nevra that allow the specification of
an exact argument in the NEVRA (name-epoch:version-release.architec-
ture) format.
This command by default does not force a sync of expired metadata. See
also Metadata Synchronization.
Check Command
Command: check
dnf [options] check [--dependencies] [--duplicates] [--obsoleted]
[--provides]
Checks the local packagedb and produces information on any problems
it finds. You can limit the checks to be performed by using the
--dependencies, --duplicates, --obsoleted and --provides options
(the default is to check everything).
Check-Update Command
Command: check-update
Aliases: check-upgrade
dnf [options] check-update [--changelogs] [<package-file-spec>...]
Non-interactively checks if updates of the specified packages are
available. If no <package-file-spec> is given, checks whether any
updates at all are available for your system. DNF exit code will be
100 when there are updates available and a list of the updates will
be printed, 0 if not and 1 if an error occurs. If --changelogs
option is specified, also changelog delta of packages about to be
updated is printed.
Please note that having a specific newer version available for an
installed package (and reported by check-update) does not imply that
subsequent dnf upgrade will install it. The difference is that dnf
upgrade has restrictions (like package dependencies being satisfied)
to take into account.
The output is affected by the autocheck_running_kernel configuration
option.
Clean Command
Command: clean
Performs cleanup of temporary files kept for repositories. This
includes any such data left behind from disabled or removed reposito-
ries as well as for different distribution release versions.
dnf clean dbcache
Removes cache files generated from the repository metadata. This
forces DNF to regenerate the cache files the next time it is
run.
dnf clean expire-cache
Marks the repository metadata expired. DNF will re-validate the
cache for each repository the next time it is used.
dnf clean metadata
Removes repository metadata. Those are the files which DNF uses
to determine the remote availability of packages. Using this
option will make DNF download all the metadata the next time it
is run.
dnf clean packages
Removes any cached packages from the system.
dnf clean all
Does all of the above.
Deplist Command
dnf [options] deplist [<select-options>] [<query-options>] [<pack-
age-spec>]
Deprecated alias for dnf repoquery --deplist.
Distro-Sync Command
Command: distro-sync
Aliases: dsync
Deprecated aliases: distrosync, distribution-synchronization
dnf distro-sync [<package-spec>...]
As necessary upgrades, downgrades or keeps selected installed
packages to match the latest version available from any enabled
repository. If no package is given, all installed packages are
considered.
See also Configuration Files Replacement Policy.
Downgrade Command
Command: downgrade
Aliases: dg
dnf [options] downgrade <package-spec>...
Downgrades the specified packages to the highest installable
package of all known lower versions if possible. When version is
given and is lower than version of installed package then it
downgrades to target version.
Group Command
Command: group
Aliases: grp
Deprecated aliases: groups, grouplist, groupinstall, groupupdate, groupremove, grouperase, groupinfo
Groups are virtual collections of packages. DNF keeps track of groups
that the user selected ("marked") installed and can manipulate the com-
prising packages with simple commands.
dnf [options] group [summary] <group-spec>
Display overview of how many groups are installed and available.
With a spec, limit the output to the matching groups. summary is
the default groups subcommand.
dnf [options] group info <group-spec>
Display package lists of a group. Shows which packages are
installed or available from a repository when -v is used.
dnf [options] group install [--with-optional] <group-spec>...
Mark the specified group installed and install packages it con-
tains. Also include optional packages of the group if
--with-optional is specified. All mandatory and Default packages
will be installed whenever possible. Conditional packages are
installed if they meet their requirement. If the group is
already (partially) installed, the command installs the missing
packages from the group. Depending on the value of obsoletes
configuration option group installation takes obsoletes into
account.
dnf [options] group list <group-spec>...
List all matching groups, either among installed or available
groups. If nothing is specified, list all known groups.
--installed and --available options narrow down the requested
list. Records are ordered by the display_order tag defined in
comps.xml file. Provides a list of all hidden groups by using
option --hidden. Provides group IDs when the -v or --ids
options are used.
dnf [options] group remove <group-spec>...
Mark the group removed and remove those packages in the group
from the system which do not belong to another installed group
and were not installed explicitly by the user.
dnf [options] group upgrade <group-spec>...
Upgrades the packages from the group and upgrades the group
itself. The latter comprises of installing packages that were
added to the group by the distribution and removing packages
that got removed from the group as far as they were not
installed explicitly by the user.
Groups can also be marked installed or removed without physically
manipulating any packages:
dnf [options] group mark install <group-spec>...
Mark the specified group installed. No packages will be
installed by this command, but the group is then considered
installed.
dnf [options] group mark remove <group-spec>...
Mark the specified group removed. No packages will be removed by
this command.
See also Configuration Files Replacement Policy.
Help Command
Command: help
dnf help [<command>]
Displays the help text for all commands. If given a command name
then only displays help for that particular command.
History Command
Command: history
Aliases: hist
The history command allows the user to view what has happened in past
transactions and act according to this information (assuming the his-
tory_record configuration option is set).
dnf history [list] [--reverse] [<spec>...]
The default history action is listing information about given
transactions in a table. Each <spec> can be either a <transac-
tion-spec>, which specifies a transaction directly, or a <trans-
action-spec>..<transaction-spec>, which specifies a range of
transactions, or a <package-name-spec>, which specifies a trans-
action by a package which it manipulated. When no transaction is
specified, list all known transactions.
The "Action(s)" column lists each type of action taken in the
transaction. The possible values are:
o Install (I): a new package was installed on the system
o Downgrade (D): an older version of a package replaced the pre-
viously-installed version
o Obsolete (O): an obsolete package was replaced by a new pack-
age
o Upgrade (U): a newer version of the package replaced the pre-
viously-installed version
o Remove (E): a package was removed from the system
o Reinstall (R): a package was reinstalled with the same version
o Reason change (C): a package was kept in the system but its
reason for being installed changed
The "Altered" column lists the number of actions taken in each
transaction, possibly followed by one or two the following sym-
bols:
o >: The RPM database was changed, outside DNF, after the trans-
action
o <: The RPM database was changed, outside DNF, before the
transaction
o *: The transaction aborted before completion
o #: The transaction completed, but with a non-zero status
o E: The transaction completed successfully, but had warn-
ing/error output
--reverse
The order of history list output is printed in reverse
order.
dnf history info [<spec>...]
Describe the given transactions. The meaning of <spec> is the
same as in the History List Command. When no transaction is
specified, describe what happened during the latest transaction.
dnf history redo <transaction-spec>|<package-file-spec>
Repeat the specified transaction. Uses the last transaction
(with the highest ID) if more than one transaction for given
<package-file-spec> is found. If it is not possible to redo some
operations due to the current state of RPMDB, it will not redo
the transaction.
dnf history replay [--ignore-installed] [--ignore-extras]
[--skip-unavailable] <filename>
Replay a transaction stored in file <filename> by History Store
Command. The replay will perform the exact same operations on
the packages as in the original transaction and will return with
an error if case of any differences in installed packages or
their versions. See also the Transaction JSON Format specifica-
tion of the file format.
--ignore-installed
Don't check for the installed packages being in the same
state as those recorded in the transaction. E.g. in case
there is an upgrade foo-1.0 -> foo-2.0 stored in the
transaction, but there is foo-1.1 installed on the target
system.
--ignore-extras
Don't check for extra packages pulled into the transac-
tion on the target system. E.g. the target system may not
have some dependency, which was installed on the source
system. The replay errors out on this by default, as the
transaction would not be the same.
--skip-unavailable
In case some packages stored in the transaction are not
available on the target system, skip them instead of
erroring out.
dnf history rollback <transaction-spec>|<package-file-spec>
Undo all transactions performed after the specified transaction.
Uses the last transaction (with the highest ID) if more than one
transaction for given <package-file-spec> is found. If it is
not possible to undo some transactions due to the current state
of RPMDB, it will not undo any transaction.
dnf history store [--output <output-file>] <transaction-spec>
Store a transaction specified by <transaction-spec>. The trans-
action can later be replayed by the History Replay Command.
Warning: The stored transaction format is considered unstable
and may change at any time. It will work if the same version of
dnf is used to store and replay (or between versions as long as
it stays the same).
-o <output-file>, --output=<output-file> Store the serialized
transaction into <output-file. Default is transaction.json.
dnf history undo <transaction-spec>|<package-file-spec>
Perform the opposite operation to all operations performed in
the specified transaction. Uses the last transaction (with the
highest ID) if more than one transaction for given <pack-
age-file-spec> is found. If it is not possible to undo some
operations due to the current state of RPMDB, it will not undo
the transaction.
dnf history userinstalled
Show all installonly packages, packages installed outside of DNF
and packages not installed as dependency. I.e. it lists packages
that will stay on the system when Autoremove Command or Remove
Command along with clean_requirements_on_remove configuration
option set to True is executed. Note the same results can be
accomplished with dnf repoquery --userinstalled, and the repo-
query command is more powerful in formatting of the output.
This command by default does not force a sync of expired metadata,
except for the redo, rollback, and undo subcommands. See also Metadata
Synchronization and Configuration Files Replacement Policy.
Info Command
Command: info
dnf [options] info [<package-file-spec>...]
Lists description and summary information about installed and
available packages.
The info command limits the displayed packages the same way as the list
command.
This command by default does not force a sync of expired metadata. See
also Metadata Synchronization.
Install Command
Command: install
Aliases: in
Aliases for explicit NEVRA matching: install-n, install-na, install-nevra
Deprecated aliases: localinstall
dnf [options] install <spec>...
Makes sure that the given packages and their dependencies are
installed on the system. Each <spec> can be either a
<package-spec>, or a @<module-spec>, or a @<group-spec>. See
Install Examples. If a given package or provide cannot be (and
is not already) installed, the exit code will be non-zero. If
the <spec> matches both a @<module-spec> and a @<group-spec>,
only the module is installed.
When <package-spec> to specify the exact version of the package
is given, DNF will install the desired version, no matter which
version of the package is already installed. The former version
of the package will be removed in the case of non-installonly
package.
On the other hand if <package-spec> specifies only a name, DNF
also takes into account packages obsoleting it when picking
which package to install. This behaviour is specific to the
install command. Note that this can lead to seemingly unex-
pected results if a package has multiple versions and some older
version is being obsoleted. It creates a split in the
upgrade-path and both ways are considered correct, the resulting
package is picked simply by lexicographical order.
There are also a few specific install commands install-n,
install-na and install-nevra that allow the specification of an
exact argument in the NEVRA format.
See also Configuration Files Replacement Policy.
Install Examples
dnf install tito
Install the tito package (tito is the package name).
dnf install ~/Downloads/tito-0.6.2-1.fc22.noarch.rpm
Install a local rpm file tito-0.6.2-1.fc22.noarch.rpm from the
~/Downloads/ directory.
dnf install tito-0.5.6-1.fc22
Install the package with a specific version. If the package is
already installed it will automatically try to downgrade or
upgrade to the specific version.
dnf --best install tito
Install the latest available version of the package. If the
package is already installed it will try to automatically
upgrade to the latest version. If the latest version of the
package cannot be installed, the installation will fail.
dnf install vim
DNF will automatically recognize that vim is not a package name,
but will look up and install a package that provides vim with
all the required dependencies. Note: Package name match has
precedence over package provides match.
dnf install https://kojipkgs.fedoraproject.org//pack-
ages/tito/0.6.0/1.fc22/noarch/tito-0.6.0-1.fc22.noarch.rpm
Install a package directly from a URL.
dnf install '@docker'
Install all default profiles of module 'docker' and their RPMs.
Module streams get enabled accordingly.
dnf install '@Web Server'
Install the 'Web Server' environmental group.
dnf install /usr/bin/rpmsign
Install a package that provides the /usr/bin/rpmsign file.
dnf -y install tito --setopt=install_weak_deps=False
Install the tito package (tito is the package name) without weak
deps. Weak deps are not required for core functionality of the
package, but they enhance the original package (like extended
documentation, plugins, additional functions, etc.).
dnf install --advisory=FEDORA-2018-b7b99fe852 \*
Install all packages that belong to the "FEDORA-2018-b7b99fe852"
advisory.
List Command
Command: list
Aliases: ls
Prints lists of packages depending on the packages' relation to the
system. A package is installed if it is present in the RPMDB, and it is
available if it is not installed but is present in a repository that
DNF knows about.
The list command also limits the displayed packages according to spe-
cific criteria, e.g. to only those that update an installed package
(respecting the repository priority). The exclude option in the config-
uration file can influence the result, but if the --disableexcludes
command line option is used, it ensures that all installed packages
will be listed.
dnf [options] list [--all] [<package-file-spec>...]
Lists all packages, present in the RPMDB, in a repository or
both.
dnf [options] list --installed [<package-file-spec>...]
Lists installed packages.
dnf [options] list --available [<package-file-spec>...]
Lists available packages.
dnf [options] list --extras [<package-file-spec>...]
Lists extras, that is packages installed on the system that are
not available in any known repository.
dnf [options] list --obsoletes [<package-file-spec>...]
List packages installed on the system that are obsoleted by
packages in any known repository.
dnf [options] list --recent [<package-file-spec>...]
List packages recently added into the repositories.
dnf [options] list --upgrades [<package-file-spec>...]
List upgrades available for the installed packages.
dnf [options] list --autoremove
List packages which will be removed by the dnf autoremove com-
mand.
This command by default does not force a sync of expired metadata. See
also Metadata Synchronization.
Makecache Command
Command: makecache
Aliases: mc
dnf [options] makecache
Downloads and caches metadata for enabled repositories. Tries to
avoid downloading whenever possible (e.g. when the local meta-
data hasn't expired yet or when the metadata timestamp hasn't
changed).
dnf [options] makecache --timer
Like plain makecache, but instructs DNF to be more
resource-aware, meaning it will not do anything if running on
battery power and will terminate immediately if it's too soon
after the last successful makecache run (see dnf.conf(5), meta-
data_timer_sync).
Mark Command
Command: mark
dnf mark install <package-spec>...
Marks the specified packages as installed by user. This can be
useful if any package was installed as a dependency and is
desired to stay on the system when Autoremove Command or Remove
Command along with clean_requirements_on_remove configuration
option set to True is executed.
dnf mark remove <package-spec>...
Unmarks the specified packages as installed by user. Whenever
you as a user don't need a specific package you can mark it for
removal. The package stays installed on the system but will be
removed when Autoremove Command or Remove Command along with
clean_requirements_on_remove configuration option set to True is
executed. You should use this operation instead of Remove Com-
mand if you're not sure whether the package is a requirement of
other user installed packages on the system.
dnf mark group <package-spec>...
Marks the specified packages as installed by group. This can be
useful if any package was installed as a dependency or a user
and is desired to be protected and handled as a group member
like during group remove.
Module Command
Command: module
Modularity overview is available at man page dnf.modularity(7). Module
subcommands take <module-spec>... arguments that specify modules or
profiles.
dnf [options] module install <module-spec>...
Install module profiles, including their packages. In case no
profile was provided, all default profiles get installed. Mod-
ule streams get enabled accordingly.
This command cannot be used for switching module streams. Use
the dnf module switch-to command for that.
dnf [options] module update <module-spec>...
Update packages associated with an active module stream, option-
ally restricted to a profile. If the profile_name is provided,
only the packages referenced by that profile will be updated.
dnf [options] module switch-to <module-spec>...
Switch to or enable a module stream, change versions of
installed packages to versions provided by the new stream, and
remove packages from the old stream that are no longer avail-
able. It also updates installed profiles if they are available
for the new stream. When a profile was provided, it installs
that profile and does not update any already installed profiles.
This command can be used as a stronger version of the dnf module
enable command, which not only enables modules, but also does a
distrosync to all modular packages in the enabled modules.
It can also be used as a stronger version of the dnf module
install command, but it requires to specify profiles that are
supposed to be installed, because switch-to command does not use
default profiles. The switch-to command doesn't only install
profiles, it also makes a distrosync to all modular packages in
the installed module.
dnf [options] module remove <module-spec>...
Remove installed module profiles, including packages that were
installed with the dnf module install command. Will not remove
packages required by other installed module profiles or by other
user-installed packages. In case no profile was provided, all
installed profiles get removed.
dnf [options] module remove --all <module-spec>...
Remove installed module profiles, including packages that were
installed with the dnf module install command. With --all
option it additionally removes all packages whose names are pro-
vided by specified modules. Packages required by other installed
module profiles and packages whose names are also provided by
any other module are not removed.
dnf [options] module enable <module-spec>...
Enable a module stream and make the stream RPMs available in the
package set.
Modular dependencies are resolved, dependencies checked and also
recursively enabled. In case of modular dependency issue the
operation will be rejected. To perform the action anyway please
use --skip-broken option.
This command cannot be used for switching module streams. Use
the dnf module switch-to command for that.
dnf [options] module disable <module-name>...
Disable a module. All related module streams will become
unavailable. Consequently, all installed profiles will be
removed and the module RPMs will become unavailable in the pack-
age set. In case of modular dependency issue the operation will
be rejected. To perform the action anyway please use --
-skip-broken option.
dnf [options] module reset <module-name>...
Reset module state so it's no longer enabled or disabled. Con-
sequently, all installed profiles will be removed and only RPMs
from the default stream will be available in the package set.
dnf [options] module provides <package-name-spec>...
Lists all modular packages matching <package-name-spec> from all
modules (including disabled), along with the modules and streams
they belong to.
dnf [options] module list [--all] [module_name...]
Lists all module streams, their profiles and states (enabled,
disabled, default).
dnf [options] module list --enabled [module_name...]
Lists module streams that are enabled.
dnf [options] module list --disabled [module_name...]
Lists module streams that are disabled.
dnf [options] module list --installed [module_name...]
List module streams with installed profiles.
dnf [options] module info <module-spec>...
Print detailed information about given module stream.
dnf [options] module info --profile <module-spec>...
Print detailed information about given module profiles.
dnf [options] module repoquery <module-spec>...
List all available packages belonging to selected modules.
dnf [options] module repoquery --available <module-spec>...
List all available packages belonging to selected modules.
dnf [options] module repoquery --installed <module-spec>...
List all installed packages with same name like packages belong-
ing to selected modules.
Provides Command
Command: provides
Aliases: prov, whatprovides
dnf [options] provides <provide-spec>
Finds the packages providing the given <provide-spec>. This is
useful when one knows a filename and wants to find what package
(installed or not) provides this file. The <provide-spec> is
gradually looked for at following locations:
1. The <provide-spec> is matched with all file provides of any
available package:
$ dnf provides /usr/bin/gzip
gzip-1.9-9.fc29.x86_64 : The GNU data compression program
Matched from:
Filename : /usr/bin/gzip
2. Then all provides of all available packages are searched:
$ dnf provides "gzip(x86-64)"
gzip-1.9-9.fc29.x86_64 : The GNU data compression program
Matched from:
Provide : gzip(x86-64) = 1.9-9.fc29
3. DNF assumes that the <provide-spec> is a system command,
prepends it with /usr/bin/, /usr/sbin/ prefixes (one at a
time) and does the file provides search again. For legacy
reasons (packages that didn't do UsrMove) also /bin and /sbin
prefixes are being searched:
$ dnf provides zless
gzip-1.9-9.fc29.x86_64 : The GNU data compression program
Matched from:
Filename : /usr/bin/zless
4. If this last step also fails, DNF returns "Error: No Matches
found".
This command by default does not force a sync of expired meta-
data. See also Metadata Synchronization.
Reinstall Command
Command: reinstall
Aliases: rei
dnf [options] reinstall <package-spec>...
Installs the specified packages, fails if some of the packages
are either not installed or not available (i.e. there is no
repository where to download the same RPM).
Remove Command
Command: remove
Aliases: rm
Aliases for explicit NEVRA matching: remove-n, remove-na, remove-nevra
Deprecated aliases: erase, erase-n, erase-na, erase-nevra
dnf [options] remove <package-spec>...
Removes the specified packages from the system along with any
packages depending on the packages being removed. Each <spec>
can be either a <package-spec>, which specifies a package
directly, or a @<group-spec>, which specifies an (environment)
group which contains it. If clean_requirements_on_remove is
enabled (the default), also removes any dependencies that are no
longer needed.
dnf [options] remove --duplicates
Removes older versions of duplicate packages. To ensure the
integrity of the system it reinstalls the newest package. In
some cases the command cannot resolve conflicts. In such cases
the dnf shell command with remove --duplicates and upgrade
dnf-shell sub-commands could help.
dnf [options] remove --oldinstallonly
Removes old installonly packages, keeping only latest versions
and version of running kernel.
There are also a few specific remove commands remove-n,
remove-na and remove-nevra that allow the specification of an
exact argument in the NEVRA format.
Remove Examples
dnf remove acpi tito
Remove the acpi and tito packages.
dnf remove $(dnf repoquery --extras --exclude=tito,acpi)
Remove packages not present in any repository, but don't remove
the tito and acpi packages (they still might be removed if they
depend on some of the removed packages).
Remove older versions of duplicated packages (an equivalent of yum's
package-cleanup --cleandups):
dnf remove --duplicates
Repoinfo Command
Command: repoinfo
An alias for the repolist command that provides more detailed infor-
mation like dnf repolist -v.
Repolist Command
Command: repolist
dnf [options] repolist [--enabled|--disabled|--all]
Depending on the exact command lists enabled, disabled or all
known repositories. Lists all enabled repositories by default.
Provides more detailed information when -v option is used.
This command by default does not force a sync of expired metadata. See
also Metadata Synchronization.
Repoquery Command
Command: repoquery
Aliases: rq
Aliases for explicit NEVRA matching: repoquery-n, repoquery-na, repoquery-nevra
dnf [options] repoquery [<select-options>] [<query-options>] [<pack-
age-file-spec>]
Searches available DNF repositories for selected packages and
displays the requested information about them. It is an equiva-
lent of rpm -q for remote repositories.
dnf [options] repoquery --querytags
Provides the list of tags recognized by the --queryformat repo-
query option.
There are also a few specific repoquery commands repoquery-n,
repoquery-na and repoquery-nevra that allow the specification of
an exact argument in the NEVRA format (does not affect arguments
of options like --whatprovides <arg>, ...).
Select Options
Together with <package-file-spec>, control what packages are displayed
in the output. If <package-file-spec> is given, limits the resulting
set of packages to those matching the specification. All packages are
considered if no <package-file-spec> is specified.
<package-file-spec>
Package specification in the NEVRA format (name[-[epoch:]ver-
sion[-release]][.arch]), a package provide or a file provide.
See Specifying Packages.
-a, --all
Query all packages (for rpmquery compatibility, also a shorthand
for repoquery '*' or repoquery without arguments).
--arch <arch>[,<arch>...], --archlist <arch>[,<arch>...]
Limit the resulting set only to packages of selected architec-
tures (default is all architectures). In some cases the result
is affected by the basearch of the running system, therefore to
run repoquery for an arch incompatible with your system use the
--forcearch=<arch> option to change the basearch.
--duplicates
Limit the resulting set to installed duplicate packages (i.e.
more package versions for the same name and architecture).
Installonly packages are excluded from this set.
--unneeded
Limit the resulting set to leaves packages that were installed
as dependencies so they are no longer needed. This switch lists
packages that are going to be removed after executing the dnf
autoremove command.
--available
Limit the resulting set to available packages only (set by
default).
--disable-modular-filtering
Disables filtering of modular packages, so that packages of
inactive module streams are included in the result.
--extras
Limit the resulting set to packages that are not present in any
of the available repositories.
-f <file>, --file <file>
Limit the resulting set only to the package that owns <file>.
--installed
Limit the resulting set to installed packages only. The exclude
option in the configuration file might influence the result, but
if the command line option --disableexcludes is used, it
ensures that all installed packages will be listed.
--installonly
Limit the resulting set to installed installonly packages.
--latest-limit <number>
Limit the resulting set to <number> of latest packages for every
package name and architecture. If <number> is negative, skip
<number> of latest packages. For a negative <number> use the
--latest-limit=<number> syntax.
--recent
Limit the resulting set to packages that were recently edited.
--repo <repoid>
Limit the resulting set only to packages from a repository iden-
tified by <repoid>. Can be used multiple times with accumula-
tive effect.
--unsatisfied
Report unsatisfied dependencies among installed packages (i.e.
missing requires and and existing conflicts).
--upgrades
Limit the resulting set to packages that provide an upgrade for
some already installed package.
--userinstalled
Limit the resulting set to packages installed by the user. The
exclude option in the configuration file might influence the
result, but if the command line option --disableexcludes is
used, it ensures that all installed packages will be listed.
--whatdepends <capability>[,<capability>...]
Limit the resulting set only to packages that require, enhance,
recommend, suggest or supplement any of <capabilities>.
--whatconflicts <capability>[,<capability>...]
Limit the resulting set only to packages that conflict with any
of <capabilities>.
--whatenhances <capability>[,<capability>...]
Limit the resulting set only to packages that enhance any of
<capabilities>. Use --whatdepends if you want to list all
depending packages.
--whatobsoletes <capability>[,<capability>...]
Limit the resulting set only to packages that obsolete any of
<capabilities>.
--whatprovides <capability>[,<capability>...]
Limit the resulting set only to packages that provide any of
<capabilities>.
--whatrecommends <capability>[,<capability>...]
Limit the resulting set only to packages that recommend any of
<capabilities>. Use --whatdepends if you want to list all
depending packages.
--whatrequires <capability>[,<capability>...]
Limit the resulting set only to packages that require any of
<capabilities>. Use --whatdepends if you want to list all
depending packages.
--whatsuggests <capability>[,<capability>...]
Limit the resulting set only to packages that suggest any of
<capabilities>. Use --whatdepends if you want to list all
depending packages.
--whatsupplements <capability>[,<capability>...]
Limit the resulting set only to packages that supplement any of
<capabilities>. Use --whatdepends if you want to list all
depending packages.
--alldeps
This option is stackable with --whatrequires or --whatdepends
only. Additionally it adds all packages requiring the package
features to the result set (used as default).
--exactdeps
This option is stackable with --whatrequires or --whatdepends
only. Limit the resulting set only to packages that require
<capability> specified by --whatrequires.
--srpm Operate on the corresponding source RPM.
Query Options
Set what information is displayed about each package.
The following are mutually exclusive, i.e. at most one can be speci-
fied. If no query option is given, matching packages are displayed in
the standard NEVRA notation.
-i, --info
Show detailed information about the package.
-l, --list
Show the list of files in the package.
-s, --source
Show the package source RPM name.
--changelogs
Print the package changelogs.
--conflicts
Display capabilities that the package conflicts with. Same as
--qf "%{conflicts}.
--depends
Display capabilities that the package depends on, enhances, rec-
ommends, suggests or supplements.
--enhances
Display capabilities enhanced by the package. Same as --qf
"%{enhances}"".
--location
Show a location where the package could be downloaded from.
--obsoletes
Display capabilities that the package obsoletes. Same as --qf
"%{obsoletes}".
--provides
Display capabilities provided by the package. Same as --qf
"%{provides}".
--recommends
Display capabilities recommended by the package. Same as --qf
"%{recommends}".
--requires
Display capabilities that the package depends on. Same as --qf
"%{requires}".
--requires-pre
Display capabilities that the package depends on for running a
%pre script. Same as --qf "%{requires-pre}".
--suggests
Display capabilities suggested by the package. Same as --qf
"%{suggests}".
--supplements
Display capabilities supplemented by the package. Same as --qf
"%{supplements}".
--tree Display a recursive tree of packages with capabilities specified
by one of the following supplementary options: --whatrequires,
--requires, --conflicts, --enhances, --suggests, --provides,
--supplements, --recommends.
--deplist
Produce a list of all direct dependencies and what packages pro-
vide those dependencies for the given packages. The result only
shows the newest providers (which can be changed by using --ver-
bose).
--nvr Show found packages in the name-version-release format. Same as
--qf "%{name}-%{version}-%{release}".
--nevra
Show found packages in the name-epoch:version-release.architec-
ture format. Same as --qf "%{name}-%{epoch}:%{ver-
sion}-%{release}.%{arch}" (default).
--envra
Show found packages in the epoch:name-version-release.architec-
ture format. Same as --qf "%{epoch}:%{name}-%{ver-
sion}-%{release}.%{arch}"
--qf <format>, --queryformat <format>
Custom display format. <format> is the string to output for each
matched package. Every occurrence of %{<tag>} within is replaced
by the corresponding attribute of the package. The list of rec-
ognized tags can be displayed by running dnf repoquery --query-
tags.
--recursive
Query packages recursively. Has to be used with --whatrequires
<REQ> (optionally with --alldeps, but not with --exactdeps) or
with --requires <REQ> --resolve.
--resolve
resolve capabilities to originating package(s).
Examples
Display NEVRAs of all available packages matching light*:
dnf repoquery 'light*'
Display NEVRAs of all available packages matching name light* and
architecture noarch (accepts only arguments in the "<name>.<arch>" for-
mat):
dnf repoquery-na 'light*.noarch'
Display requires of all lighttpd packages:
dnf repoquery --requires lighttpd
Display packages providing the requires of python packages:
dnf repoquery --requires python --resolve
Display source rpm of ligttpd package:
dnf repoquery --source lighttpd
Display package name that owns the given file:
dnf repoquery --file /etc/lighttpd/lighttpd.conf
Display name, architecture and the containing repository of all
lighttpd packages:
dnf repoquery --queryformat '%{name}.%{arch} : %{reponame}' lighttpd
Display all available packages providing "webserver":
dnf repoquery --whatprovides webserver
Display all available packages providing "webserver" but only for
"i686" architecture:
dnf repoquery --whatprovides webserver --arch i686
Display duplicate packages:
dnf repoquery --duplicates
Display source packages that require a <provide> for a build:
dnf repoquery --disablerepo="*" --enablerepo="*-source" --arch=src --whatrequires <provide>
Repository-Packages Command
Command: repository-packages
Deprecated aliases: repo-pkgs, repo-packages, repository-pkgs
The repository-packages command allows the user to run commands on top
of all packages in the repository named <repoid>. However, any depen-
dency resolution takes into account packages from all enabled reposito-
ries. The <package-file-spec> and <package-spec> specifications further
limit the candidates to only those packages matching at least one of
them.
The info subcommand lists description and summary information about
packages depending on the packages' relation to the repository. The
list subcommand just prints lists of those packages.
dnf [options] repository-packages <repoid> check-update [<pack-
age-file-spec>...]
Non-interactively checks if updates of the specified packages in
the repository are available. DNF exit code will be 100 when
there are updates available and a list of the updates will be
printed.
dnf [options] repository-packages <repoid> info [--all] [<pack-
age-file-spec>...]
List all related packages.
dnf [options] repository-packages <repoid> info --installed [<pack-
age-file-spec>...]
List packages installed from the repository.
dnf [options] repository-packages <repoid> info --available [<pack-
age-file-spec>...]
List packages available in the repository but not currently
installed on the system.
dnf [options] repository-packages <repoid> info --extras [<pack-
age-file-specs>...]
List packages installed from the repository that are not avail-
able in any repository.
dnf [options] repository-packages <repoid> info --obsoletes [<pack-
age-file-spec>...]
List packages in the repository that obsolete packages installed
on the system.
dnf [options] repository-packages <repoid> info --recent [<pack-
age-file-spec>...]
List packages recently added into the repository.
dnf [options] repository-packages <repoid> info --upgrades [<pack-
age-file-spec>...]
List packages in the repository that upgrade packages installed
on the system.
dnf [options] repository-packages <repoid> install [<package-spec>...]
Install all packages in the repository.
dnf [options] repository-packages <repoid> list [--all] [<pack-
age-file-spec>...]
List all related packages.
dnf [options] repository-packages <repoid> list --installed [<pack-
age-file-spec>...]
List packages installed from the repository.
dnf [options] repository-packages <repoid> list --available [<pack-
age-file-spec>...]
List packages available in the repository but not currently
installed on the system.
dnf [options] repository-packages <repoid> list --extras [<pack-
age-file-spec>...]
List packages installed from the repository that are not avail-
able in any repository.
dnf [options] repository-packages <repoid> list --obsoletes [<pack-
age-file-spec>...]
List packages in the repository that obsolete packages installed
on the system.
dnf [options] repository-packages <repoid> list --recent [<pack-
age-file-spec>...]
List packages recently added into the repository.
dnf [options] repository-packages <repoid> list --upgrades [<pack-
age-file-spec>...]
List packages in the repository that upgrade packages installed
on the system.
dnf [options] repository-packages <repoid> move-to [<package-spec>...]
Reinstall all those packages that are available in the reposi-
tory.
dnf [options] repository-packages <repoid> reinstall [<pack-
age-spec>...]
Run the reinstall-old subcommand. If it fails, run the move-to
subcommand.
dnf [options] repository-packages <repoid> reinstall-old [<pack-
age-spec>...]
Reinstall all those packages that were installed from the repos-
itory and simultaneously are available in the repository.
dnf [options] repository-packages <repoid> remove [<package-spec>...]
Remove all packages installed from the repository along with any
packages depending on the packages being removed. If
clean_requirements_on_remove is enabled (the default) also
removes any dependencies that are no longer needed.
dnf [options] repository-packages <repoid> remove-or-distro-sync
[<package-spec>...]
Select all packages installed from the repository. Upgrade,
downgrade or keep those of them that are available in another
repository to match the latest version available there and
remove the others along with any packages depending on the pack-
ages being removed. If clean_requirements_on_remove is enabled
(the default) also removes any dependencies that are no longer
needed.
dnf [options] repository-packages <repoid> remove-or-reinstall [<pack-
age-spec>...]
Select all packages installed from the repository. Reinstall
those of them that are available in another repository and
remove the others along with any packages depending on the pack-
ages being removed. If clean_requirements_on_remove is enabled
(the default) also removes any dependencies that are no longer
needed.
dnf [options] repository-packages <repoid> upgrade [<package-spec>...]
Update all packages to the highest resolvable version available
in the repository. When versions are specified in the <pack-
age-spec>, update to these versions.
dnf [options] repository-packages <repoid> upgrade-to [<pack-
age-specs>...]
A deprecated alias for the upgrade subcommand.
Search Command
Command: search
Aliases: se
dnf [options] search [--all] <keywords>...
Search package metadata for keywords. Keywords are matched as
case-insensitive substrings, globbing is supported. By default
lists packages that match all requested keys (AND operation).
Keys are searched in package names and summaries. If the
"--all" option is used, lists packages that match at least one
of the keys (an OR operation). In addition the keys are
searched in the package descriptions and URLs. The result is
sorted from the most relevant results to the least.
This command by default does not force a sync of expired metadata. See
also Metadata Synchronization.
Shell Command
Command: shell
Aliases: sh
dnf [options] shell [filename]
Open an interactive shell for conducting multiple commands dur-
ing a single execution of DNF. These commands can be issued man-
ually or passed to DNF from a file. The commands are much the
same as the normal DNF command line options. There are a few
additional commands documented below.
config [conf-option] [value]
o Set a configuration option to a requested value. If no
value is given it prints the current value.
repo [list|enable|disable] [repo-id]
o list: list repositories and their status
o enable: enable repository
o disable: disable repository
transaction [list|reset|solve|run]
o list: resolve and list the content of the transaction
o reset: reset the transaction
o run: resolve and run the transaction
Note that all local packages must be used in the first shell
transaction subcommand (e.g. install /tmp/nodejs-1-1.x86_64.rpm
/tmp/acpi-1-1.noarch.rpm) otherwise an error will occur. Any
disable, enable, and reset module operations (e.g. module enable
nodejs) must also be performed before any other shell transac-
tion subcommand is used.
Swap Command
Command: swap
dnf [options] swap <remove-spec> <install-spec>
Remove spec and install spec in one transaction. Each <spec> can be
either a <package-spec>, which specifies a package directly, or a
@<group-spec>, which specifies an (environment) group which contains
it. Automatic conflict solving is provided in DNF by the --allow-
erasing option that provides the functionality of the swap command
automatically.
Updateinfo Command
Command: updateinfo
Deprecated aliases: list-updateinfo, list-security, list-sec, info-updateinfo, info-security, info-sec, summary-updateinfo
dnf [options] updateinfo [--summary|--list|--info] [<availability>]
[<spec>...]
Display information about update advisories.
Depending on the output type, DNF displays just counts of advi-
sory types (omitted or --summary), list of advisories (--list)
or detailed information (--info). The -v option extends the out-
put. When used with --info, the information is even more
detailed. When used with --list, an additional column with date
of the last advisory update is added.
<availability> specifies whether advisories about newer versions
of installed packages (omitted or --available), advisories about
equal and older versions of installed packages (--installed),
advisories about newer versions of those installed packages for
which a newer version is available (--updates) or advisories
about any versions of installed packages (--all) are taken into
account. Most of the time, --available and --updates displays
the same output. The outputs differ only in the cases when an
advisory refers to a newer version but there is no enabled
repository which contains any newer version.
Note, that --available tooks only the latest installed versions
of packages into account. In case of the kernel packages (when
multiple version could be installed simultaneously) also pack-
ages of the currently running version of kernel are added.
To print only advisories referencing a CVE or a bugzilla use
--with-cve or --with-bz options. When these switches are used
also the output of the --list is altered - the ID of the CVE or
the bugzilla is printed instead of the one of the advisory.
If given and if neither ID, type (bugfix, enhancement, secu-
rity/sec) nor a package name of an advisory matches <spec>, the
advisory is not taken into account. The matching is case-sensi-
tive and in the case of advisory IDs and package names, globbing
is supported.
Output of the --summary option is affected by the autocheck_run-
ning_kernel configuration option.
Upgrade Command
Command: upgrade
Aliases: up
Deprecated aliases: update, upgrade-to, update-to, localupdate
dnf [options] upgrade
Updates each package to the latest version that is both avail-
able and resolvable.
dnf [options] upgrade <package-spec>...
Updates each specified package to the latest available version.
Updates dependencies as necessary. When versions are specified
in the <package-spec>, update to these versions.
dnf [options] upgrade @<spec>...
Alias for the dnf module update command.
If the main obsoletes configure option is true or the --obsoletes flag
is present, dnf will include package obsoletes in its calculations.
For more information see obsoletes.
See also Configuration Files Replacement Policy.
Upgrade-Minimal Command
Command: upgrade-minimal
Aliases: up-min
Deprecated aliases: update-minimal
dnf [options] upgrade-minimal
Updates each package to the latest available version that pro-
vides a bugfix, enhancement or a fix for a security issue (secu-
rity).
dnf [options] upgrade-minimal <package-spec>...
Updates each specified package to the latest available version
that provides a bugfix, enhancement or a fix for security issue
(security). Updates dependencies as necessary.
SPECIFYING PACKAGES
Many commands take a <package-spec> parameter that selects a package
for the operation. The <package-spec> argument is matched against pack-
age NEVRAs, provides and file provides.
<package-file-spec> is similar to <package-spec>, except provides
matching is not performed. Therefore, <package-file-spec> is matched
only against NEVRAs and file provides.
<package-name-spec> is matched against NEVRAs only.
Globs
Package specification supports the same glob pattern matching that
shell does, in all three above mentioned packages it matches against
(NEVRAs, provides and file provides).
The following patterns are supported:
* Matches any number of characters.
? Matches any single character.
[] Matches any one of the enclosed characters. A pair of characters
separated by a hyphen denotes a range expression; any character
that falls between those two characters, inclusive, is matched.
If the first character following the [ is a ! or a ^ then any
character not enclosed is matched.
Note: Curly brackets ({}) are not supported. You can still use them in
shells that support them and let the shell do the expansion, but if
quoted or escaped, dnf will not expand them.
NEVRA Matching
When matching against NEVRAs, partial matching is supported. DNF tries
to match the spec against the following list of NEVRA forms (in
decreasing order of priority):
o name-[epoch:]version-release.arch
o name.arch
o name
o name-[epoch:]version-release
o name-[epoch:]version
Note that name can in general contain dashes (e.g. pack-
age-with-dashes).
The first form that matches any packages is used and the remaining
forms are not tried. If none of the forms match any packages, an
attempt is made to match the <package-spec> against full package
NEVRAs. This is only relevant if globs are present in the <pack-
age-spec>.
<package-spec> matches NEVRAs the same way <package-name-spec> does,
but in case matching NEVRAs fails, it attempts to match against pro-
vides and file provides of packages as well.
You can specify globs as part of any of the five NEVRA components. You
can also specify a glob pattern to match over multiple NEVRA components
(in other words, to match across the NEVRA separators). In that case,
however, you need to write the spec to match against full package
NEVRAs, as it is not possible to split such spec into NEVRA forms.
Specifying NEVRA Matching Explicitly
Some commands (autoremove, install, remove and repoquery) also have
aliases with suffixes -n, -na and -nevra that allow to explicitly spec-
ify how to parse the arguments:
o Command install-n only matches against name.
o Command install-na only matches against name.arch.
o Command install-nevra only matches against name-[epoch:]ver-
sion-release.arch.
SPECIFYING PROVIDES
<provide-spec> in command descriptions means the command operates on
packages providing the given spec. This can either be an explicit pro-
vide, an implicit provide (i.e. name of the package) or a file provide.
The selection is case-sensitive and globbing is supported.
SPECIFYING GROUPS
<group-spec> allows one to select (environment) groups a particular
operation should work on. It is a case insensitive string (supporting
globbing characters) that is matched against a group's ID, canonical
name and name translated into the current LC_MESSAGES locale (if possi-
ble).
SPECIFYING MODULES
<module-spec> allows one to select modules or profiles a particular
operation should work on.
It is in the form of NAME:STREAM:VERSION:CONTEXT:ARCH/PROFILE and sup-
ported partial forms are the following:
o NAME
o NAME:STREAM
o NAME:STREAM:VERSION
o NAME:STREAM:VERSION:CONTEXT
o all above combinations with ::ARCH (e.g. NAME::ARCH)
o NAME:STREAM:VERSION:CONTEXT:ARCH
o all above combinations with /PROFILE (e.g. NAME/PROFILE)
In case stream is not specified, the enabled or the default stream is
used, in this order. In case profile is not specified, the system
default profile or the 'default' profile is used.
SPECIFYING TRANSACTIONS
<transaction-spec> can be in one of several forms. If it is an integer,
it specifies a transaction ID. Specifying last is the same as specify-
ing the ID of the most recent transaction. The last form is last-<off-
set>, where <offset> is a positive integer. It specifies offset-th
transaction preceding the most recent transaction.
PACKAGE FILTERING
Package filtering filters packages out from the available package set,
making them invisible to most of dnf commands. They cannot be used in a
transaction. Packages can be filtered out by either Exclude Filtering
or Modular Filtering.
Exclude Filtering
Exclude Filtering is a mechanism used by a user or by a DNF plugin to
modify the set of available packages. Exclude Filtering can be modified
by either includepkgs or excludepkgs configuration options in configu-
ration files. The --disableexcludes command line option can be used to
override excludes from configuration files. In addition to user-config-
ured excludes, plugins can also extend the set of excluded packages. To
disable excludes from a DNF plugin you can use the --disableplugin com-
mand line option.
To disable all excludes for e.g. the install command you can use the
following combination of command line options:
dnf --disableexcludes=all --disableplugin="*" install bash
Modular Filtering
Please see the modularity documentation for details on how Modular Fil-
tering works.
With modularity, only RPM packages from active module streams are
included in the available package set. RPM packages from inactive mod-
ule streams, as well as non-modular packages with the same name or pro-
vides as a package from an active module stream, are filtered out. Mod-
ular filtering is not applied to packages added from the command line,
installed packages, or packages from repositories with module_hot-
fixes=true in their .repo file.
Disabling of modular filtering is not recommended, because it could
cause the system to get into a broken state. To disable modular filter-
ing for a particular repository, specify module_hotfixes=true in the
.repo file or use --setopt=<repo_id>.module_hotfixes=true.
To discover the module which contains an excluded package use dnf mod-
ule provides.
METADATA SYNCHRONIZATION
Correct operation of DNF depends on having access to up-to-date data
from all enabled repositories but contacting remote mirrors on every
operation considerably slows it down and costs bandwidth for both the
client and the repository provider. The metadata_expire (see
dnf.conf(5)) repository configuration option is used by DNF to deter-
mine whether a particular local copy of repository data is due to be
re-synced. It is crucial that the repository providers set the option
well, namely to a value where it is guaranteed that if particular meta-
data was available in time T on the server, then all packages it refer-
ences will still be available for download from the server in time T +
metadata_expire.
To further reduce the bandwidth load, some of the commands where having
up-to-date metadata is not critical (e.g. the list command) do not look
at whether a repository is expired and whenever any version of it is
locally available to the user's account, it will be used. For non-root
use, see also the --cacheonly switch. Note that in all situations the
user can force synchronization of all enabled repositories with the
--refresh switch.
CONFIGURATION FILES REPLACEMENT POLICY
The updated packages could replace the old modified configuration files
with the new ones or keep the older files. Neither of the files are
actually replaced. To the conflicting ones RPM gives additional suffix
to the origin name. Which file should maintain the true name after
transaction is not controlled by package manager but is specified by
each package itself, following packaging guideline.
FILES
Cache Files
/var/cache/dnf
Main Configuration
/etc/dnf/dnf.conf
Repository
/etc/yum.repos.d/
SEE ALSO
o dnf.conf(5), DNF Configuration Reference
o dnf-PLUGIN(8) for documentation on DNF plugins.
o dnf.modularity(7), Modularity overview.
o dnf-transaction-json(5), Stored Transaction JSON Format Specifica-
tion.
o DNF project homepage (-
https://github.com/rpm-software-management/dnf/)
o How to report a bug (-
https://github.com/rpm-software-management/dnf/wiki/Bug-Reporting)
o YUM project homepage (http://yum.baseurl.org/)
AUTHOR
See AUTHORS in DNF source distribution.
COPYRIGHT
2012-2020, Red Hat, Licensed under GPLv2+
4.7.0 Apr 08, 2024 YUM(8)
Linux-Distributionen
Huschi als Linux-Admin