VGREDUCE(8) System Manager's Manual VGREDUCE(8)
NAME
vgreduce - Remove physical volume(s) from a volume group
SYNOPSIS
vgreduce option_args position_args
[ option_args ]
-a|--all
-A|--autobackup y|n
--commandprofile String
--config String
-d|--debug
--driverloaded y|n
-f|--force
-h|--help
--lockopt String
--longhelp
--mirrorsonly
--profile String
-q|--quiet
--removemissing
--reportformat basic|json
-t|--test
-v|--verbose
--version
-y|--yes
DESCRIPTION
vgreduce removes one or more unused PVs from a VG.
USAGE
Remove a PV from a VG.
vgreduce VG PV ...
[ COMMON_OPTIONS ]
-
Remove all unused PVs from a VG.
vgreduce -a|--all VG
[ COMMON_OPTIONS ]
-
Remove all missing PVs from a VG.
vgreduce --removemissing VG
[ --mirrorsonly ]
[ COMMON_OPTIONS ]
-
Common options for command:
[ -A|--autobackup y|n ]
[ -f|--force ]
[ --reportformat basic|json ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --lockopt String ]
[ --longhelp ]
[ --profile String ]
[ --version ]
OPTIONS
-a|--all
Removes all empty PVs if none are named on the command line.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a
change. Enabling this is strongly advised! See vgcfgbackup(8)
for more information.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf set-
tings. The String arg uses the same format as lvm.conf, or may
use section/field syntax. See lvm.conf(5) for more information
about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail
of messages sent to the log file and/or syslog (if configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
-f|--force ...
Override various checks, confirmations and protections. Use
with extreme caution.
-h|--help
Display help text.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvm-
lockd(8) for more information.
--longhelp
Display long help text.
--mirrorsonly
Only remove missing PVs from mirror LVs.
--profile String
An alias for --commandprofile or --metadataprofile, depending on
the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --ver-
bose. Repeat once to also suppress any prompts with answer
'no'.
--removemissing
Removes all missing PVs from the VG, if there are no LVs allo-
cated on them. This resumes normal operation of the VG (new LVs
may again be created, changed and so on). If this is not possi-
ble because LVs are referencing the missing PVs, this option can
be combined with --force to have the command remove any partial
LVs. In this case, any LVs and dependent snapshots that were
partly on the missing disks are removed completely, including
those parts on disks that are still present. If LVs spanned
several disks, including ones that are lost, salvaging some data
first may be possible by activating LVs in partial mode.
--reportformat basic|json
Overrides current output format for reports which is defined
globally by the report/output_format setting in lvm.conf. basic
is the original format with columns and rows. If there is more
than one report per command, each report is prefixed with the
report name for identification. json produces report output in
JSON format. See lvmreport(7) for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to
unusual error messages in multi-stage operations if a tool
relies on reading back metadata it believes has changed but
hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the
detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
VARIABLES
VG
Volume Group name. See lvm(8) for valid names.
PV
Physical Volume name, a device path under /dev. For commands
managing physical extents, a PV positional arg generally accepts
a suffix indicating a range (or multiple ranges) of physical
extents (PEs). When the first PE is omitted, it defaults to the
start of the device, and when the last PE is omitted it defaults
to end. Start and end range (inclusive): PV[:PE-PE]... Start
and length range (counting from 0): PV[:PE+PE]...
String
See the option description for information about the string con-
tent.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of capi-
talization, e.g. 'k' and 'K' both refer to 1024. The default
input unit is specified by letter, followed by |UNIT. UNIT rep-
resents other possible input units: bBsSkKmMgGtTpPeE. b|B is
bytes, s|S is sectors of 512 bytes, k|K is kilobytes, m|M is
megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes,
e|E is exabytes. (This should not be confused with the output
control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG
parameter.
SEE ALSO
lvm(8) lvm.conf(5) lvmconfig(8)
pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)
pvresize(8) pvs(8) pvscan(8)
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgcon-
vert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8) vgimport-
clone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8) vgrename(8)
vgs(8) vgscan(8) vgsplit(8)
lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvre-
duce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeacti-
vate(8) lvmdump(8)
dmeventd(8) lvmetad(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
cmirrord(8) lvmdbusd(8)
lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
Red Hat, Inc. LVM TOOLS 2.02.187(2)-RHEL7 (2020-03-24) VGREDUCE(8)
Linux-Distributionen
Huschi als Linux-Admin