huschi.net

PERLOPENTUT(1)         Perl Programmers Reference Guide         PERLOPENTUT(1)
NAME
       perlopentut - simple recipes for opening files and pipes in Perl
DESCRIPTION
       Whenever you do I/O on a file in Perl, you do so through what in Perl
       is called a filehandle.  A filehandle is an internal name for an
       external file.  It is the job of the "open" function to make the
       association between the internal name and the external name, and it is
       the job of the "close" function to break that association.
       For your convenience, Perl sets up a few special filehandles that are
       already open when you run.  These include "STDIN", "STDOUT", "STDERR",
       and "ARGV".  Since those are pre-opened, you can use them right away
       without having to go to the trouble of opening them yourself:
           print STDERR "This is a debugging message.\n";
           print STDOUT "Please enter something: ";
           $response = <STDIN> // die "how come no input?";
           print STDOUT "Thank you!\n";
           while (<ARGV>) { ... }
       As you see from those examples, "STDOUT" and "STDERR" are output
       handles, and "STDIN" and "ARGV" are input handles.  They are in all
       capital letters because they are reserved to Perl, much like the @ARGV
       array and the %ENV hash are.  Their external associations were set up
       by your shell.
       You will need to open every other filehandle on your own. Although
       there are many variants, the most common way to call Perl's open()
       function is with three arguments and one return value:
       "    OK = open(HANDLE, MODE, PATHNAME)"
       Where:
       OK  will be some defined value if the open succeeds, but "undef" if it
           fails;
       HANDLE
           should be an undefined scalar variable to be filled in by the
           "open" function if it succeeds;
       MODE
           is the access mode and the encoding format to open the file with;
       PATHNAME
           is the external name of the file you want opened.
       Most of the complexity of the "open" function lies in the many possible
       values that the MODE parameter can take on.
       One last thing before we show you how to open files: opening files does
       not (usually) automatically lock them in Perl.  See perlfaq5 for how to
       lock.
Opening Text Files
   Opening Text Files for Reading
       If you want to read from a text file, first open it in read-only mode
       like this:
           my $filename = "/some/path/to/a/textfile/goes/here";
           my $encoding = ":encoding(UTF-8)";
           my $handle   = undef;     # this will be filled in on success
           open($handle, "< $encoding", $filename)
               || die "$0: can't open $filename for reading: $!";
       As with the shell, in Perl the "<" is used to open the file in read-
       only mode.  If it succeeds, Perl allocates a brand new filehandle for
       you and fills in your previously undefined $handle argument with a
       reference to that handle.
       Now you may use functions like "readline", "read", "getc", and
       "sysread" on that handle.  Probably the most common input function is
       the one that looks like an operator:
           $line = readline($handle);
           $line = <$handle>;          # same thing
       Because the "readline" function returns "undef" at end of file or upon
       error, you will sometimes see it used this way:
           $line = <$handle>;
           if (defined $line) {
               # do something with $line
           }
           else {
               # $line is not valid, so skip it
           }
       You can also just quickly "die" on an undefined value this way:
           $line = <$handle> // die "no input found";
       However, if hitting EOF is an expected and normal event, you do not
       want to exit simply because you have run out of input.  Instead, you
       probably just want to exit an input loop.  You can then test to see if
       an actual error has caused the loop to terminate, and act accordingly:
           while (<$handle>) {
               # do something with data in $_
           }
           if ($!) {
               die "unexpected error while reading from $filename: $!";
           }
       A Note on Encodings: Having to specify the text encoding every time
       might seem a bit of a bother.  To set up a default encoding for "open"
       so that you don't have to supply it each time, you can use the "open"
       pragma:
           use open qw< :encoding(UTF-8) >;
       Once you've done that, you can safely omit the encoding part of the
       open mode:
           open($handle, "<", $filename)
               || die "$0: can't open $filename for reading: $!";
       But never use the bare "<" without having set up a default encoding
       first.  Otherwise, Perl cannot know which of the many, many, many
       possible flavors of text file you have, and Perl will have no idea how
       to correctly map the data in your file into actual characters it can
       work with.  Other common encoding formats including "ASCII",
       "ISO-8859-1", "ISO-8859-15", "Windows-1252", "MacRoman", and even
       "UTF-16LE".  See perlunitut for more about encodings.
   Opening Text Files for Writing
       When you want to write to a file, you first have to decide what to do
       about any existing contents of that file.  You have two basic choices
       here: to preserve or to clobber.
       If you want to preserve any existing contents, then you want to open
       the file in append mode.  As in the shell, in Perl you use ">>" to open
       an existing file in append mode.  ">>" creates the file if it does not
       already exist.
           my $handle   = undef;
           my $filename = "/some/path/to/a/textfile/goes/here";
           my $encoding = ":encoding(UTF-8)";
           open($handle, ">> $encoding", $filename)
               || die "$0: can't open $filename for appending: $!";
       Now you can write to that filehandle using any of "print", "printf",
       "say", "write", or "syswrite".
       As noted above, if the file does not already exist, then the append-
       mode open will create it for you.  But if the file does already exist,
       its contents are safe from harm because you will be adding your new
       text past the end of the old text.
       On the other hand, sometimes you want to clobber whatever might already
       be there.  To empty out a file before you start writing to it, you can
       open it in write-only mode:
           my $handle   = undef;
           my $filename = "/some/path/to/a/textfile/goes/here";
           my $encoding = ":encoding(UTF-8)";
           open($handle, "> $encoding", $filename)
               || die "$0: can't open $filename in write-open mode: $!";
       Here again Perl works just like the shell in that the ">" clobbers an
       existing file.
       As with the append mode, when you open a file in write-only mode, you
       can now write to that filehandle using any of "print", "printf", "say",
       "write", or "syswrite".
       What about read-write mode?  You should probably pretend it doesn't
       exist, because opening text files in read-write mode is unlikely to do
       what you would like.  See perlfaq5 for details.
Opening Binary Files
       If the file to be opened contains binary data instead of text
       characters, then the "MODE" argument to "open" is a little different.
       Instead of specifying the encoding, you tell Perl that your data are in
       raw bytes.
           my $filename = "/some/path/to/a/binary/file/goes/here";
           my $encoding = ":raw :bytes"
           my $handle   = undef;     # this will be filled in on success
       And then open as before, choosing "<", ">>", or ">" as needed:
           open($handle, "< $encoding", $filename)
               || die "$0: can't open $filename for reading: $!";
           open($handle, ">> $encoding", $filename)
               || die "$0: can't open $filename for appending: $!";
           open($handle, "> $encoding", $filename)
               || die "$0: can't open $filename in write-open mode: $!";
       Alternately, you can change to binary mode on an existing handle this
       way:
           binmode($handle)    || die "cannot binmode handle";
       This is especially handy for the handles that Perl has already opened
       for you.
           binmode(STDIN)      || die "cannot binmode STDIN";
           binmode(STDOUT)     || die "cannot binmode STDOUT";
       You can also pass "binmode" an explicit encoding to change it on the
       fly.  This isn't exactly "binary" mode, but we still use "binmode" to
       do it:
         binmode(STDIN,  ":encoding(MacRoman)") || die "cannot binmode STDIN";
         binmode(STDOUT, ":encoding(UTF-8)")    || die "cannot binmode STDOUT";
       Once you have your binary file properly opened in the right mode, you
       can use all the same Perl I/O functions as you used on text files.
       However, you may wish to use the fixed-size "read" instead of the
       variable-sized "readline" for your input.
       Here's an example of how to copy a binary file:
           my $BUFSIZ   = 64 * (2 ** 10);
           my $name_in  = "/some/input/file";
           my $name_out = "/some/output/flie";
           my($in_fh, $out_fh, $buffer);
           open($in_fh,  "<", $name_in)
               || die "$0: cannot open $name_in for reading: $!";
           open($out_fh, ">", $name_out)
               || die "$0: cannot open $name_out for writing: $!";
           for my $fh ($in_fh, $out_fh)  {
               binmode($fh)               || die "binmode failed";
           }
           while (read($in_fh, $buffer, $BUFSIZ)) {
               unless (print $out_fh $buffer) {
                   die "couldn't write to $name_out: $!";
               }
           }
           close($in_fh)       || die "couldn't close $name_in: $!";
           close($out_fh)      || die "couldn't close $name_out: $!";
Opening Pipes
       To be announced.
Low-level File Opens via sysopen
       To be announced.  Or deleted.
SEE ALSO
       To be announced.
AUTHOR and COPYRIGHT
       Copyright 2013 Tom Christiansen.
       This documentation is free; you can redistribute it and/or modify it
       under the same terms as Perl itself.
perl v5.26.3                      2018-03-01                    PERLOPENTUT(1)