PERLAPI(1) Perl Programmers Reference Guide PERLAPI(1)
NAME
perlapi - autogenerated documentation for the perl public API
DESCRIPTION
This file contains the documentation of the perl public API generated
by embed.pl, specifically a listing of functions, macros, flags, and
variables that may be used by extension writers. At the end is a list
of functions which have yet to be documented. The interfaces of those
are subject to change without notice. Any functions not listed here
are not part of the public API, and should not be used by extension
writers at all. For these reasons, blindly using functions listed in
proto.h is to be avoided when writing extensions.
Note that all Perl API global variables must be referenced with the
"PL_" prefix. Some macros are provided for compatibility with the
older, unadorned names, but this support may be disabled in a future
release.
Perl was originally written to handle US-ASCII only (that is characters
whose ordinal numbers are in the range 0 - 127). And documentation and
comments may still use the term ASCII, when sometimes in fact the
entire range from 0 - 255 is meant.
Note that Perl can be compiled and run under EBCDIC (See perlebcdic) or
ASCII. Most of the documentation (and even comments in the code)
ignore the EBCDIC possibility. For almost all purposes the differences
are transparent. As an example, under EBCDIC, instead of UTF-8, UTF-
EBCDIC is used to encode Unicode strings, and so whenever this
documentation refers to "utf8" (and variants of that name, including in
function names), it also (essentially transparently) means
"UTF-EBCDIC". But the ordinals of characters differ between ASCII,
EBCDIC, and the UTF- encodings, and a string encoded in UTF-EBCDIC may
occupy more bytes than in UTF-8.
Also, on some EBCDIC machines, functions that are documented as
operating on US-ASCII (or Basic Latin in Unicode terminology) may in
fact operate on all 256 characters in the EBCDIC range, not just the
subset corresponding to US-ASCII.
The listing below is alphabetical, case insensitive.
"Gimme" Values
GIMME A backward-compatible version of "GIMME_V" which can only
return "G_SCALAR" or "G_ARRAY"; in a void context, it returns
"G_SCALAR". Deprecated. Use "GIMME_V" instead.
U32 GIMME
GIMME_V The XSUB-writer's equivalent to Perl's "wantarray". Returns
"G_VOID", "G_SCALAR" or "G_ARRAY" for void, scalar or list
context, respectively. See perlcall for a usage example.
U32 GIMME_V
G_ARRAY Used to indicate list context. See "GIMME_V", "GIMME" and
perlcall.
G_DISCARD
Indicates that arguments returned from a callback should be
discarded. See perlcall.
G_EVAL Used to force a Perl "eval" wrapper around a callback. See
perlcall.
G_NOARGS
Indicates that no arguments are being sent to a callback. See
perlcall.
G_SCALAR
Used to indicate scalar context. See "GIMME_V", "GIMME", and
perlcall.
G_VOID Used to indicate void context. See "GIMME_V" and perlcall.
Array Manipulation Functions
AvFILL Same as "av_len()". Deprecated, use "av_len()" instead.
int AvFILL(AV* av)
av_clear
Clears an array, making it empty. Does not free the memory the
av uses to store its list of scalars. If any destructors are
triggered as a result, the av itself may be freed when this
function returns.
Perl equivalent: "@myarray = ();".
void av_clear(AV *av)
av_create_and_push
Push an SV onto the end of the array, creating the array if
necessary. A small internal helper function to remove a
commonly duplicated idiom.
NOTE: this function is experimental and may change or be
removed without notice.
void av_create_and_push(AV **const avp,
SV *const val)
av_create_and_unshift_one
Unshifts an SV onto the beginning of the array, creating the
array if necessary. A small internal helper function to remove
a commonly duplicated idiom.
NOTE: this function is experimental and may change or be
removed without notice.
SV** av_create_and_unshift_one(AV **const avp,
SV *const val)
av_delete
Deletes the element indexed by "key" from the array, makes the
element mortal, and returns it. If "flags" equals "G_DISCARD",
the element is freed and null is returned. Perl equivalent:
"my $elem = delete($myarray[$idx]);" for the non-"G_DISCARD"
version and a void-context "delete($myarray[$idx]);" for the
"G_DISCARD" version.
SV* av_delete(AV *av, I32 key, I32 flags)
av_exists
Returns true if the element indexed by "key" has been
initialized.
This relies on the fact that uninitialized array elements are
set to &PL_sv_undef.
Perl equivalent: "exists($myarray[$key])".
bool av_exists(AV *av, I32 key)
av_extend
Pre-extend an array. The "key" is the index to which the array
should be extended.
void av_extend(AV *av, I32 key)
av_fetch
Returns the SV at the specified index in the array. The "key"
is the index. If lval is true, you are guaranteed to get a
real SV back (in case it wasn't real before), which you can
then modify. Check that the return value is non-null before
dereferencing it to a "SV*".
See "Understanding the Magic of Tied Hashes and Arrays" in
perlguts for more information on how to use this function on
tied arrays.
The rough perl equivalent is $myarray[$idx].
SV** av_fetch(AV *av, I32 key, I32 lval)
av_fill Set the highest index in the array to the given number,
equivalent to Perl's "$#array = $fill;".
The number of elements in the an array will be "fill + 1" after
av_fill() returns. If the array was previously shorter, then
the additional elements appended are set to "PL_sv_undef". If
the array was longer, then the excess elements are freed.
"av_fill(av, -1)" is the same as "av_clear(av)".
void av_fill(AV *av, I32 fill)
av_len Returns the highest index in the array. The number of elements
in the array is "av_len(av) + 1". Returns -1 if the array is
empty.
The Perl equivalent for this is $#myarray.
I32 av_len(AV *av)
av_make Creates a new AV and populates it with a list of SVs. The SVs
are copied into the array, so they may be freed after the call
to av_make. The new AV will have a reference count of 1.
Perl equivalent: "my @new_array = ($scalar1, $scalar2,
$scalar3...);"
AV* av_make(I32 size, SV **strp)
av_pop Pops an SV off the end of the array. Returns &PL_sv_undef if
the array is empty.
Perl equivalent: "pop(@myarray);"
SV* av_pop(AV *av)
av_push Pushes an SV onto the end of the array. The array will grow
automatically to accommodate the addition. This takes
ownership of one reference count.
Perl equivalent: "push @myarray, $elem;".
void av_push(AV *av, SV *val)
av_shift
Shifts an SV off the beginning of the array. Returns
&PL_sv_undef if the array is empty.
Perl equivalent: "shift(@myarray);"
SV* av_shift(AV *av)
av_store
Stores an SV in an array. The array index is specified as
"key". The return value will be NULL if the operation failed
or if the value did not need to be actually stored within the
array (as in the case of tied arrays). Otherwise, it can be
dereferenced to get the "SV*" that was stored there (= "val")).
Note that the caller is responsible for suitably incrementing
the reference count of "val" before the call, and decrementing
it if the function returned NULL.
Approximate Perl equivalent: "$myarray[$key] = $val;".
See "Understanding the Magic of Tied Hashes and Arrays" in
perlguts for more information on how to use this function on
tied arrays.
SV** av_store(AV *av, I32 key, SV *val)
av_undef
Undefines the array. Frees the memory used by the av to store
its list of scalars. If any destructors are triggered as a
result, the av itself may be freed.
void av_undef(AV *av)
av_unshift
Unshift the given number of "undef" values onto the beginning
of the array. The array will grow automatically to accommodate
the addition. You must then use "av_store" to assign values to
these new elements.
Perl equivalent: "unshift @myarray, ( (undef) x $n );"
void av_unshift(AV *av, I32 num)
get_av Returns the AV of the specified Perl global or package array
with the given name (so it won't work on lexical variables).
"flags" are passed to "gv_fetchpv". If "GV_ADD" is set and the
Perl variable does not exist then it will be created. If
"flags" is zero and the variable does not exist then NULL is
returned.
Perl equivalent: "@{"$name"}".
NOTE: the perl_ form of this function is deprecated.
AV* get_av(const char *name, I32 flags)
newAV Creates a new AV. The reference count is set to 1.
Perl equivalent: "my @array;".
AV* newAV()
sortsv Sort an array. Here is an example:
sortsv(AvARRAY(av), av_len(av)+1, Perl_sv_cmp_locale);
Currently this always uses mergesort. See sortsv_flags for a
more flexible routine.
void sortsv(SV** array, size_t num_elts,
SVCOMPARE_t cmp)
sortsv_flags
Sort an array, with various options.
void sortsv_flags(SV** array, size_t num_elts,
SVCOMPARE_t cmp, U32 flags)
Callback Functions
call_argv
Performs a callback to the specified named and package-scoped
Perl subroutine with "argv" (a NULL-terminated array of
strings) as arguments. See perlcall.
Approximate Perl equivalent: "&{"$sub_name"}(@$argv)".
NOTE: the perl_ form of this function is deprecated.
I32 call_argv(const char* sub_name, I32 flags,
char** argv)
call_method
Performs a callback to the specified Perl method. The blessed
object must be on the stack. See perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 call_method(const char* methname, I32 flags)
call_pv Performs a callback to the specified Perl sub. See perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 call_pv(const char* sub_name, I32 flags)
call_sv Performs a callback to the Perl sub whose name is in the SV.
See perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 call_sv(SV* sv, VOL I32 flags)
ENTER Opening bracket on a callback. See "LEAVE" and perlcall.
ENTER;
eval_pv Tells Perl to "eval" the given string and return an SV* result.
NOTE: the perl_ form of this function is deprecated.
SV* eval_pv(const char* p, I32 croak_on_error)
eval_sv Tells Perl to "eval" the string in the SV. It supports the same
flags as "call_sv", with the obvious exception of G_EVAL. See
perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 eval_sv(SV* sv, I32 flags)
FREETMPS
Closing bracket for temporaries on a callback. See "SAVETMPS"
and perlcall.
FREETMPS;
LEAVE Closing bracket on a callback. See "ENTER" and perlcall.
LEAVE;
SAVETMPS
Opening bracket for temporaries on a callback. See "FREETMPS"
and perlcall.
SAVETMPS;
Character case changing
toLOWER Converts the specified character to lowercase in the platform's
native character set, if possible; otherwise returns the input
character itself.
char toLOWER(char ch)
toUPPER Converts the specified character to uppercase in the platform's
native character set, if possible; otherwise returns the input
character itself.
char toUPPER(char ch)
Character classes
There are three variants for all the functions in this section. The
base ones operate using the character set of the platform Perl is
running on. The ones with an "_A" suffix operate on the ASCII
character set, and the ones with an "_L1" suffix operate on the full
Latin1 character set. All are unaffected by locale and by "use bytes".
For ASCII platforms, the base function with no suffix and the one with
the "_A" suffix are identical. The function with the "_L1" suffix
imposes the Latin-1 character set onto the platform. That is, the code
points that are ASCII are unaffected, since ASCII is a subset of
Latin-1. But the non-ASCII code points are treated as if they are
Latin-1 characters. For example, "isSPACE_L1()" will return true when
called with the code point 0xA0, which is the Latin-1 NO-BREAK SPACE.
For EBCDIC platforms, the base function with no suffix and the one with
the "_L1" suffix should be identical, since, as of this writing, the
EBCDIC code pages that Perl knows about all are equivalent to Latin-1.
The function that ends in an "_A" suffix will not return true unless
the specified character also has an ASCII equivalent.
isALPHA Returns a boolean indicating whether the specified character is
an alphabetic character in the platform's native character set.
See the top of this section for an explanation of variants
"isALPHA_A" and "isALPHA_L1".
bool isALPHA(char ch)
isASCII Returns a boolean indicating whether the specified character is
one of the 128 characters in the ASCII character set. On non-
ASCII platforms, it is if this character corresponds to an
ASCII character. Variants "isASCII_A()" and "isASCII_L1()" are
identical to "isASCII()".
bool isASCII(char ch)
isDIGIT Returns a boolean indicating whether the specified character is
a digit in the platform's native character set. Variants
"isDIGIT_A" and "isDIGIT_L1" are identical to "isDIGIT".
bool isDIGIT(char ch)
isLOWER Returns a boolean indicating whether the specified character is
a lowercase character in the platform's native character set.
See the top of this section for an explanation of variants
"isLOWER_A" and "isLOWER_L1".
bool isLOWER(char ch)
isOCTAL Returns a boolean indicating whether the specified character is
an octal digit, [0-7] in the platform's native character set.
Variants "isOCTAL_A" and "isOCTAL_L1" are identical to
"isOCTAL".
bool isOCTAL(char ch)
isSPACE Returns a boolean indicating whether the specified character is
a whitespace character in the platform's native character set.
This is the same as what "\s" matches in a regular expression.
See the top of this section for an explanation of variants
"isSPACE_A" and "isSPACE_L1".
bool isSPACE(char ch)
isUPPER Returns a boolean indicating whether the specified character is
an uppercase character in the platform's native character set.
See the top of this section for an explanation of variants
"isUPPER_A" and "isUPPER_L1".
bool isUPPER(char ch)
isWORDCHAR
Returns a boolean indicating whether the specified character is
a character that is any of: alphabetic, numeric, or an
underscore. This is the same as what "\w" matches in a regular
expression. "isALNUM()" is a synonym provided for backward
compatibility. Note that it does not have the standard C
language meaning of alphanumeric, since it matches an
underscore and the standard meaning does not. See the top of
this section for an explanation of variants "isWORDCHAR_A" and
"isWORDCHAR_L1".
bool isWORDCHAR(char ch)
isXDIGIT
Returns a boolean indicating whether the specified character is
a hexadecimal digit, [0-9A-Fa-f]. Variants "isXDIGIT_A()" and
"isXDIGIT_L1()" are identical to "isXDIGIT()".
bool isXDIGIT(char ch)
Cloning an interpreter
perl_clone
Create and return a new interpreter by cloning the current one.
perl_clone takes these flags as parameters:
CLONEf_COPY_STACKS - is used to, well, copy the stacks also,
without it we only clone the data and zero the stacks, with it
we copy the stacks and the new perl interpreter is ready to run
at the exact same point as the previous one. The pseudo-fork
code uses COPY_STACKS while the threads->create doesn't.
CLONEf_KEEP_PTR_TABLE - perl_clone keeps a ptr_table with the
pointer of the old variable as a key and the new variable as a
value, this allows it to check if something has been cloned and
not clone it again but rather just use the value and increase
the refcount. If KEEP_PTR_TABLE is not set then perl_clone
will kill the ptr_table using the function
"ptr_table_free(PL_ptr_table); PL_ptr_table = NULL;", reason to
keep it around is if you want to dup some of your own variable
who are outside the graph perl scans, example of this code is
in threads.xs create.
CLONEf_CLONE_HOST - This is a win32 thing, it is ignored on
unix, it tells perls win32host code (which is c++) to clone
itself, this is needed on win32 if you want to run two threads
at the same time, if you just want to do some stuff in a
separate perl interpreter and then throw it away and return to
the original one, you don't need to do anything.
PerlInterpreter* perl_clone(
PerlInterpreter *proto_perl,
UV flags
)
Compile-time scope hooks
BhkDISABLE
Temporarily disable an entry in this BHK structure, by clearing
the appropriate flag. which is a preprocessor token indicating
which entry to disable.
NOTE: this function is experimental and may change or be
removed without notice.
void BhkDISABLE(BHK *hk, which)
BhkENABLE
Re-enable an entry in this BHK structure, by setting the
appropriate flag. which is a preprocessor token indicating
which entry to enable. This will assert (under -DDEBUGGING) if
the entry doesn't contain a valid pointer.
NOTE: this function is experimental and may change or be
removed without notice.
void BhkENABLE(BHK *hk, which)
BhkENTRY_set
Set an entry in the BHK structure, and set the flags to
indicate it is valid. which is a preprocessing token indicating
which entry to set. The type of ptr depends on the entry.
NOTE: this function is experimental and may change or be
removed without notice.
void BhkENTRY_set(BHK *hk, which, void *ptr)
blockhook_register
Register a set of hooks to be called when the Perl lexical
scope changes at compile time. See "Compile-time scope hooks"
in perlguts.
NOTE: this function is experimental and may change or be
removed without notice.
NOTE: this function must be explicitly called as
Perl_blockhook_register with an aTHX_ parameter.
void Perl_blockhook_register(pTHX_ BHK *hk)
COP Hint Hashes
cophh_2hv
Generates and returns a standard Perl hash representing the
full set of key/value pairs in the cop hints hash cophh. flags
is currently unused and must be zero.
NOTE: this function is experimental and may change or be
removed without notice.
HV * cophh_2hv(const COPHH *cophh, U32 flags)
cophh_copy
Make and return a complete copy of the cop hints hash cophh.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_copy(COPHH *cophh)
cophh_delete_pv
Like "cophh_delete_pvn", but takes a nul-terminated string
instead of a string/length pair.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_delete_pv(const COPHH *cophh,
const char *key, U32 hash,
U32 flags)
cophh_delete_pvn
Delete a key and its associated value from the cop hints hash
cophh, and returns the modified hash. The returned hash
pointer is in general not the same as the hash pointer that was
passed in. The input hash is consumed by the function, and the
pointer to it must not be subsequently used. Use "cophh_copy"
if you need both hashes.
The key is specified by keypv and keylen. If flags has the
"COPHH_KEY_UTF8" bit set, the key octets are interpreted as
UTF-8, otherwise they are interpreted as Latin-1. hash is a
precomputed hash of the key string, or zero if it has not been
precomputed.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_delete_pvn(COPHH *cophh,
const char *keypv,
STRLEN keylen, U32 hash,
U32 flags)
cophh_delete_pvs
Like "cophh_delete_pvn", but takes a literal string instead of
a string/length pair, and no precomputed hash.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_delete_pvs(const COPHH *cophh,
const char *key, U32 flags)
cophh_delete_sv
Like "cophh_delete_pvn", but takes a Perl scalar instead of a
string/length pair.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_delete_sv(const COPHH *cophh, SV *key,
U32 hash, U32 flags)
cophh_fetch_pv
Like "cophh_fetch_pvn", but takes a nul-terminated string
instead of a string/length pair.
NOTE: this function is experimental and may change or be
removed without notice.
SV * cophh_fetch_pv(const COPHH *cophh,
const char *key, U32 hash,
U32 flags)
cophh_fetch_pvn
Look up the entry in the cop hints hash cophh with the key
specified by keypv and keylen. If flags has the
"COPHH_KEY_UTF8" bit set, the key octets are interpreted as
UTF-8, otherwise they are interpreted as Latin-1. hash is a
precomputed hash of the key string, or zero if it has not been
precomputed. Returns a mortal scalar copy of the value
associated with the key, or &PL_sv_placeholder if there is no
value associated with the key.
NOTE: this function is experimental and may change or be
removed without notice.
SV * cophh_fetch_pvn(const COPHH *cophh,
const char *keypv,
STRLEN keylen, U32 hash,
U32 flags)
cophh_fetch_pvs
Like "cophh_fetch_pvn", but takes a literal string instead of a
string/length pair, and no precomputed hash.
NOTE: this function is experimental and may change or be
removed without notice.
SV * cophh_fetch_pvs(const COPHH *cophh,
const char *key, U32 flags)
cophh_fetch_sv
Like "cophh_fetch_pvn", but takes a Perl scalar instead of a
string/length pair.
NOTE: this function is experimental and may change or be
removed without notice.
SV * cophh_fetch_sv(const COPHH *cophh, SV *key,
U32 hash, U32 flags)
cophh_free
Discard the cop hints hash cophh, freeing all resources
associated with it.
NOTE: this function is experimental and may change or be
removed without notice.
void cophh_free(COPHH *cophh)
cophh_new_empty
Generate and return a fresh cop hints hash containing no
entries.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_new_empty()
cophh_store_pv
Like "cophh_store_pvn", but takes a nul-terminated string
instead of a string/length pair.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_store_pv(const COPHH *cophh,
const char *key, U32 hash,
SV *value, U32 flags)
cophh_store_pvn
Stores a value, associated with a key, in the cop hints hash
cophh, and returns the modified hash. The returned hash
pointer is in general not the same as the hash pointer that was
passed in. The input hash is consumed by the function, and the
pointer to it must not be subsequently used. Use "cophh_copy"
if you need both hashes.
The key is specified by keypv and keylen. If flags has the
"COPHH_KEY_UTF8" bit set, the key octets are interpreted as
UTF-8, otherwise they are interpreted as Latin-1. hash is a
precomputed hash of the key string, or zero if it has not been
precomputed.
value is the scalar value to store for this key. value is
copied by this function, which thus does not take ownership of
any reference to it, and later changes to the scalar will not
be reflected in the value visible in the cop hints hash.
Complex types of scalar will not be stored with referential
integrity, but will be coerced to strings.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_store_pvn(COPHH *cophh, const char *keypv,
STRLEN keylen, U32 hash,
SV *value, U32 flags)
cophh_store_pvs
Like "cophh_store_pvn", but takes a literal string instead of a
string/length pair, and no precomputed hash.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_store_pvs(const COPHH *cophh,
const char *key, SV *value,
U32 flags)
cophh_store_sv
Like "cophh_store_pvn", but takes a Perl scalar instead of a
string/length pair.
NOTE: this function is experimental and may change or be
removed without notice.
COPHH * cophh_store_sv(const COPHH *cophh, SV *key,
U32 hash, SV *value, U32 flags)
COP Hint Reading
cop_hints_2hv
Generates and returns a standard Perl hash representing the
full set of hint entries in the cop cop. flags is currently
unused and must be zero.
HV * cop_hints_2hv(const COP *cop, U32 flags)
cop_hints_fetch_pv
Like "cop_hints_fetch_pvn", but takes a nul-terminated string
instead of a string/length pair.
SV * cop_hints_fetch_pv(const COP *cop,
const char *key, U32 hash,
U32 flags)
cop_hints_fetch_pvn
Look up the hint entry in the cop cop with the key specified by
keypv and keylen. If flags has the "COPHH_KEY_UTF8" bit set,
the key octets are interpreted as UTF-8, otherwise they are
interpreted as Latin-1. hash is a precomputed hash of the key
string, or zero if it has not been precomputed. Returns a
mortal scalar copy of the value associated with the key, or
&PL_sv_placeholder if there is no value associated with the
key.
SV * cop_hints_fetch_pvn(const COP *cop,
const char *keypv,
STRLEN keylen, U32 hash,
U32 flags)
cop_hints_fetch_pvs
Like "cop_hints_fetch_pvn", but takes a literal string instead
of a string/length pair, and no precomputed hash.
SV * cop_hints_fetch_pvs(const COP *cop,
const char *key, U32 flags)
cop_hints_fetch_sv
Like "cop_hints_fetch_pvn", but takes a Perl scalar instead of
a string/length pair.
SV * cop_hints_fetch_sv(const COP *cop, SV *key,
U32 hash, U32 flags)
Custom Operators
custom_op_register
Register a custom op. See "Custom Operators" in perlguts.
NOTE: this function must be explicitly called as
Perl_custom_op_register with an aTHX_ parameter.
void Perl_custom_op_register(pTHX_
Perl_ppaddr_t ppaddr,
const XOP *xop)
custom_op_xop
Return the XOP structure for a given custom op. This function
should be considered internal to OP_NAME and the other access
macros: use them instead.
NOTE: this function must be explicitly called as
Perl_custom_op_xop with an aTHX_ parameter.
const XOP * Perl_custom_op_xop(pTHX_ const OP *o)
XopDISABLE
Temporarily disable a member of the XOP, by clearing the
appropriate flag.
void XopDISABLE(XOP *xop, which)
XopENABLE
Reenable a member of the XOP which has been disabled.
void XopENABLE(XOP *xop, which)
XopENTRY
Return a member of the XOP structure. which is a cpp token
indicating which entry to return. If the member is not set this
will return a default value. The return type depends on which.
XopENTRY(XOP *xop, which)
XopENTRY_set
Set a member of the XOP structure. which is a cpp token
indicating which entry to set. See "Custom Operators" in
perlguts for details about the available members and how they
are used.
void XopENTRY_set(XOP *xop, which, value)
XopFLAGS
Return the XOP's flags.
U32 XopFLAGS(XOP *xop)
CV Manipulation Functions
CvSTASH Returns the stash of the CV. A stash is the symbol table hash,
containing the package-scoped variables in the package where
the subroutine was defined. For more information, see
perlguts.
This also has a special use with XS AUTOLOAD subs. See
"Autoloading with XSUBs" in perlguts.
HV* CvSTASH(CV* cv)
get_cv Uses "strlen" to get the length of "name", then calls
"get_cvn_flags".
NOTE: the perl_ form of this function is deprecated.
CV* get_cv(const char* name, I32 flags)
get_cvn_flags
Returns the CV of the specified Perl subroutine. "flags" are
passed to "gv_fetchpvn_flags". If "GV_ADD" is set and the Perl
subroutine does not exist then it will be declared (which has
the same effect as saying "sub name;"). If "GV_ADD" is not set
and the subroutine does not exist then NULL is returned.
NOTE: the perl_ form of this function is deprecated.
CV* get_cvn_flags(const char* name, STRLEN len,
I32 flags)
Embedding Functions
cv_clone
Clone a CV, making a lexical closure. proto supplies the
prototype of the function: its code, pad structure, and other
attributes. The prototype is combined with a capture of outer
lexicals to which the code refers, which are taken from the
currently-executing instance of the immediately surrounding
code.
CV * cv_clone(CV *proto)
cv_undef
Clear out all the active components of a CV. This can happen
either by an explicit "undef &foo", or by the reference count
going to zero. In the former case, we keep the CvOUTSIDE
pointer, so that any anonymous children can still follow the
full lexical scope chain.
void cv_undef(CV* cv)
find_rundefsv
Find and return the variable that is named $_ in the lexical
scope of the currently-executing function. This may be a
lexical $_, or will otherwise be the global one.
SV * find_rundefsv()
find_rundefsvoffset
Find the position of the lexical $_ in the pad of the
currently-executing function. Returns the offset in the
current pad, or "NOT_IN_PAD" if there is no lexical $_ in scope
(in which case the global one should be used instead).
"find_rundefsv" is likely to be more convenient.
NOTE: the perl_ form of this function is deprecated.
PADOFFSET find_rundefsvoffset()
load_module
Loads the module whose name is pointed to by the string part of
name. Note that the actual module name, not its filename,
should be given. Eg, "Foo::Bar" instead of "Foo/Bar.pm".
flags can be any of PERL_LOADMOD_DENY, PERL_LOADMOD_NOIMPORT,
or PERL_LOADMOD_IMPORT_OPS (or 0 for no flags). ver, if
specified and not NULL, provides version semantics similar to
"use Foo::Bar VERSION". The optional trailing SV* arguments
can be used to specify arguments to the module's import()
method, similar to "use Foo::Bar VERSION LIST". They must be
terminated with a final NULL pointer. Note that this list can
only be omitted when the PERL_LOADMOD_NOIMPORT flag has been
used. Otherwise at least a single NULL pointer to designate
the default import list is required.
The reference count for each specified "SV*" parameter is
decremented.
void load_module(U32 flags, SV* name, SV* ver, ...)
nothreadhook
Stub that provides thread hook for perl_destruct when there are
no threads.
int nothreadhook()
pad_add_anon
Allocates a place in the currently-compiling pad (via
"pad_alloc") for an anonymous function that is lexically scoped
inside the currently-compiling function. The function func is
linked into the pad, and its "CvOUTSIDE" link to the outer
scope is weakened to avoid a reference loop.
optype should be an opcode indicating the type of operation
that the pad entry is to support. This doesn't affect
operational semantics, but is used for debugging.
PADOFFSET pad_add_anon(CV *func, I32 optype)
pad_add_name_pv
Exactly like "pad_add_name_pvn", but takes a nul-terminated
string instead of a string/length pair.
PADOFFSET pad_add_name_pv(const char *name, U32 flags,
HV *typestash, HV *ourstash)
pad_add_name_pvn
Allocates a place in the currently-compiling pad for a named
lexical variable. Stores the name and other metadata in the
name part of the pad, and makes preparations to manage the
variable's lexical scoping. Returns the offset of the
allocated pad slot.
namepv/namelen specify the variable's name, including leading
sigil. If typestash is non-null, the name is for a typed
lexical, and this identifies the type. If ourstash is non-
null, it's a lexical reference to a package variable, and this
identifies the package. The following flags can be OR'ed
together:
padadd_OUR redundantly specifies if it's a package var
padadd_STATE variable will retain value persistently
padadd_NO_DUP_CHECK skip check for lexical shadowing
PADOFFSET pad_add_name_pvn(const char *namepv,
STRLEN namelen, U32 flags,
HV *typestash, HV *ourstash)
pad_add_name_sv
Exactly like "pad_add_name_pvn", but takes the name string in
the form of an SV instead of a string/length pair.
PADOFFSET pad_add_name_sv(SV *name, U32 flags,
HV *typestash, HV *ourstash)
pad_alloc
Allocates a place in the currently-compiling pad, returning the
offset of the allocated pad slot. No name is initially
attached to the pad slot. tmptype is a set of flags indicating
the kind of pad entry required, which will be set in the value
SV for the allocated pad entry:
SVs_PADMY named lexical variable ("my", "our", "state")
SVs_PADTMP unnamed temporary store
optype should be an opcode indicating the type of operation
that the pad entry is to support. This doesn't affect
operational semantics, but is used for debugging.
NOTE: this function is experimental and may change or be
removed without notice.
PADOFFSET pad_alloc(I32 optype, U32 tmptype)
pad_compname_type
Looks up the type of the lexical variable at position po in the
currently-compiling pad. If the variable is typed, the stash
of the class to which it is typed is returned. If not, "NULL"
is returned.
HV * pad_compname_type(PADOFFSET po)
pad_findmy_pv
Exactly like "pad_findmy_pvn", but takes a nul-terminated
string instead of a string/length pair.
PADOFFSET pad_findmy_pv(const char *name, U32 flags)
pad_findmy_pvn
Given the name of a lexical variable, find its position in the
currently-compiling pad. namepv/namelen specify the variable's
name, including leading sigil. flags is reserved and must be
zero. If it is not in the current pad but appears in the pad
of any lexically enclosing scope, then a pseudo-entry for it is
added in the current pad. Returns the offset in the current
pad, or "NOT_IN_PAD" if no such lexical is in scope.
PADOFFSET pad_findmy_pvn(const char *namepv,
STRLEN namelen, U32 flags)
pad_findmy_sv
Exactly like "pad_findmy_pvn", but takes the name string in the
form of an SV instead of a string/length pair.
PADOFFSET pad_findmy_sv(SV *name, U32 flags)
pad_setsv
Set the value at offset po in the current (compiling or
executing) pad. Use the macro PAD_SETSV() rather than calling
this function directly.
void pad_setsv(PADOFFSET po, SV *sv)
pad_sv Get the value at offset po in the current (compiling or
executing) pad. Use macro PAD_SV instead of calling this
function directly.
SV * pad_sv(PADOFFSET po)
pad_tidy
Tidy up a pad at the end of compilation of the code to which it
belongs. Jobs performed here are: remove most stuff from the
pads of anonsub prototypes; give it a @_; mark temporaries as
such. type indicates the kind of subroutine:
padtidy_SUB ordinary subroutine
padtidy_SUBCLONE prototype for lexical closure
padtidy_FORMAT format
NOTE: this function is experimental and may change or be
removed without notice.
void pad_tidy(padtidy_type type)
perl_alloc
Allocates a new Perl interpreter. See perlembed.
PerlInterpreter* perl_alloc()
perl_construct
Initializes a new Perl interpreter. See perlembed.
void perl_construct(PerlInterpreter *my_perl)
perl_destruct
Shuts down a Perl interpreter. See perlembed.
int perl_destruct(PerlInterpreter *my_perl)
perl_free
Releases a Perl interpreter. See perlembed.
void perl_free(PerlInterpreter *my_perl)
perl_parse
Tells a Perl interpreter to parse a Perl script. See
perlembed.
int perl_parse(PerlInterpreter *my_perl,
XSINIT_t xsinit, int argc,
char** argv, char** env)
perl_run
Tells a Perl interpreter to run. See perlembed.
int perl_run(PerlInterpreter *my_perl)
require_pv
Tells Perl to "require" the file named by the string argument.
It is analogous to the Perl code "eval "require '$file'"".
It's even implemented that way; consider using load_module
instead.
NOTE: the perl_ form of this function is deprecated.
void require_pv(const char* pv)
Functions in file dump.c
pv_display
Similar to
pv_escape(dsv,pv,cur,pvlim,PERL_PV_ESCAPE_QUOTE);
except that an additional "\0" will be appended to the string
when len > cur and pv[cur] is "\0".
Note that the final string may be up to 7 chars longer than
pvlim.
char* pv_display(SV *dsv, const char *pv, STRLEN cur,
STRLEN len, STRLEN pvlim)
pv_escape
Escapes at most the first "count" chars of pv and puts the
results into dsv such that the size of the escaped string will
not exceed "max" chars and will not contain any incomplete
escape sequences.
If flags contains PERL_PV_ESCAPE_QUOTE then any double quotes
in the string will also be escaped.
Normally the SV will be cleared before the escaped string is
prepared, but when PERL_PV_ESCAPE_NOCLEAR is set this will not
occur.
If PERL_PV_ESCAPE_UNI is set then the input string is treated
as Unicode, if PERL_PV_ESCAPE_UNI_DETECT is set then the input
string is scanned using "is_utf8_string()" to determine if it
is Unicode.
If PERL_PV_ESCAPE_ALL is set then all input chars will be
output using "\x01F1" style escapes, otherwise if
PERL_PV_ESCAPE_NONASCII is set, only chars above 127 will be
escaped using this style; otherwise, only chars above 255 will
be so escaped; other non printable chars will use octal or
common escaped patterns like "\n". Otherwise, if
PERL_PV_ESCAPE_NOBACKSLASH then all chars below 255 will be
treated as printable and will be output as literals.
If PERL_PV_ESCAPE_FIRSTCHAR is set then only the first char of
the string will be escaped, regardless of max. If the output is
to be in hex, then it will be returned as a plain hex sequence.
Thus the output will either be a single char, an octal escape
sequence, a special escape like "\n" or a hex value.
If PERL_PV_ESCAPE_RE is set then the escape char used will be a
'%' and not a '\\'. This is because regexes very often contain
backslashed sequences, whereas '%' is not a particularly common
character in patterns.
Returns a pointer to the escaped text as held by dsv.
char* pv_escape(SV *dsv, char const * const str,
const STRLEN count, const STRLEN max,
STRLEN * const escaped,
const U32 flags)
pv_pretty
Converts a string into something presentable, handling escaping
via pv_escape() and supporting quoting and ellipses.
If the PERL_PV_PRETTY_QUOTE flag is set then the result will be
double quoted with any double quotes in the string escaped.
Otherwise if the PERL_PV_PRETTY_LTGT flag is set then the
result be wrapped in angle brackets.
If the PERL_PV_PRETTY_ELLIPSES flag is set and not all
characters in string were output then an ellipsis "..." will be
appended to the string. Note that this happens AFTER it has
been quoted.
If start_color is non-null then it will be inserted after the
opening quote (if there is one) but before the escaped text. If
end_color is non-null then it will be inserted after the
escaped text but before any quotes or ellipses.
Returns a pointer to the prettified text as held by dsv.
char* pv_pretty(SV *dsv, char const * const str,
const STRLEN count, const STRLEN max,
char const * const start_color,
char const * const end_color,
const U32 flags)
Functions in file mathoms.c
custom_op_desc
Return the description of a given custom op. This was once used
by the OP_DESC macro, but is no longer: it has only been kept
for compatibility, and should not be used.
const char * custom_op_desc(const OP *o)
custom_op_name
Return the name for a given custom op. This was once used by
the OP_NAME macro, but is no longer: it has only been kept for
compatibility, and should not be used.
const char * custom_op_name(const OP *o)
gv_fetchmethod
See "gv_fetchmethod_autoload".
GV* gv_fetchmethod(HV* stash, const char* name)
pack_cat
The engine implementing pack() Perl function. Note: parameters
next_in_list and flags are not used. This call should not be
used; use packlist instead.
void pack_cat(SV *cat, const char *pat,
const char *patend, SV **beglist,
SV **endlist, SV ***next_in_list,
U32 flags)
sv_2pvbyte_nolen
Return a pointer to the byte-encoded representation of the SV.
May cause the SV to be downgraded from UTF-8 as a side-effect.
Usually accessed via the "SvPVbyte_nolen" macro.
char* sv_2pvbyte_nolen(SV* sv)
sv_2pvutf8_nolen
Return a pointer to the UTF-8-encoded representation of the SV.
May cause the SV to be upgraded to UTF-8 as a side-effect.
Usually accessed via the "SvPVutf8_nolen" macro.
char* sv_2pvutf8_nolen(SV* sv)
sv_2pv_nolen
Like "sv_2pv()", but doesn't return the length too. You should
usually use the macro wrapper "SvPV_nolen(sv)" instead.
char* sv_2pv_nolen(SV* sv)
sv_catpvn_mg
Like "sv_catpvn", but also handles 'set' magic.
void sv_catpvn_mg(SV *sv, const char *ptr,
STRLEN len)
sv_catsv_mg
Like "sv_catsv", but also handles 'set' magic.
void sv_catsv_mg(SV *dsv, SV *ssv)
sv_force_normal
Undo various types of fakery on an SV: if the PV is a shared
string, make a private copy; if we're a ref, stop refing; if
we're a glob, downgrade to an xpvmg. See also
"sv_force_normal_flags".
void sv_force_normal(SV *sv)
sv_iv A private implementation of the "SvIVx" macro for compilers
which can't cope with complex macro expressions. Always use the
macro instead.
IV sv_iv(SV* sv)
sv_nolocking
Dummy routine which "locks" an SV when there is no locking
module present. Exists to avoid test for a NULL function
pointer and because it could potentially warn under some level
of strict-ness.
"Superseded" by sv_nosharing().
void sv_nolocking(SV *sv)
sv_nounlocking
Dummy routine which "unlocks" an SV when there is no locking
module present. Exists to avoid test for a NULL function
pointer and because it could potentially warn under some level
of strict-ness.
"Superseded" by sv_nosharing().
void sv_nounlocking(SV *sv)
sv_nv A private implementation of the "SvNVx" macro for compilers
which can't cope with complex macro expressions. Always use the
macro instead.
NV sv_nv(SV* sv)
sv_pv Use the "SvPV_nolen" macro instead
char* sv_pv(SV *sv)
sv_pvbyte
Use "SvPVbyte_nolen" instead.
char* sv_pvbyte(SV *sv)
sv_pvbyten
A private implementation of the "SvPVbyte" macro for compilers
which can't cope with complex macro expressions. Always use the
macro instead.
char* sv_pvbyten(SV *sv, STRLEN *lp)
sv_pvn A private implementation of the "SvPV" macro for compilers
which can't cope with complex macro expressions. Always use the
macro instead.
char* sv_pvn(SV *sv, STRLEN *lp)
sv_pvutf8
Use the "SvPVutf8_nolen" macro instead
char* sv_pvutf8(SV *sv)
sv_pvutf8n
A private implementation of the "SvPVutf8" macro for compilers
which can't cope with complex macro expressions. Always use the
macro instead.
char* sv_pvutf8n(SV *sv, STRLEN *lp)
sv_taint
Taint an SV. Use "SvTAINTED_on" instead.
void sv_taint(SV* sv)
sv_unref
Unsets the RV status of the SV, and decrements the reference
count of whatever was being referenced by the RV. This can
almost be thought of as a reversal of "newSVrv". This is
"sv_unref_flags" with the "flag" being zero. See "SvROK_off".
void sv_unref(SV* sv)
sv_usepvn
Tells an SV to use "ptr" to find its string value. Implemented
by calling "sv_usepvn_flags" with "flags" of 0, hence does not
handle 'set' magic. See "sv_usepvn_flags".
void sv_usepvn(SV* sv, char* ptr, STRLEN len)
sv_usepvn_mg
Like "sv_usepvn", but also handles 'set' magic.
void sv_usepvn_mg(SV *sv, char *ptr, STRLEN len)
sv_uv A private implementation of the "SvUVx" macro for compilers
which can't cope with complex macro expressions. Always use the
macro instead.
UV sv_uv(SV* sv)
unpack_str
The engine implementing unpack() Perl function. Note:
parameters strbeg, new_s and ocnt are not used. This call
should not be used, use unpackstring instead.
I32 unpack_str(const char *pat, const char *patend,
const char *s, const char *strbeg,
const char *strend, char **new_s,
I32 ocnt, U32 flags)
Functions in file op.c
op_contextualize
Applies a syntactic context to an op tree representing an
expression. o is the op tree, and context must be "G_SCALAR",
"G_ARRAY", or "G_VOID" to specify the context to apply. The
modified op tree is returned.
OP * op_contextualize(OP *o, I32 context)
Functions in file perl.h
PERL_SYS_INIT
Provides system-specific tune up of the C runtime environment
necessary to run Perl interpreters. This should be called only
once, before creating any Perl interpreters.
void PERL_SYS_INIT(int argc, char** argv)
PERL_SYS_INIT3
Provides system-specific tune up of the C runtime environment
necessary to run Perl interpreters. This should be called only
once, before creating any Perl interpreters.
void PERL_SYS_INIT3(int argc, char** argv,
char** env)
PERL_SYS_TERM
Provides system-specific clean up of the C runtime environment
after running Perl interpreters. This should be called only
once, after freeing any remaining Perl interpreters.
void PERL_SYS_TERM()
Functions in file pp_ctl.c
caller_cx
The XSUB-writer's equivalent of caller(). The returned
"PERL_CONTEXT" structure can be interrogated to find all the
information returned to Perl by "caller". Note that XSUBs don't
get a stack frame, so "caller_cx(0, NULL)" will return
information for the immediately-surrounding Perl code.
This function skips over the automatic calls to &DB::sub made
on the behalf of the debugger. If the stack frame requested was
a sub called by "DB::sub", the return value will be the frame
for the call to "DB::sub", since that has the correct line
number/etc. for the call site. If dbcxp is non-"NULL", it will
be set to a pointer to the frame for the sub call itself.
const PERL_CONTEXT * caller_cx(
I32 level,
const PERL_CONTEXT **dbcxp
)
find_runcv
Locate the CV corresponding to the currently executing sub or
eval. If db_seqp is non_null, skip CVs that are in the DB
package and populate *db_seqp with the cop sequence number at
the point that the DB:: code was entered. (allows debuggers to
eval in the scope of the breakpoint rather than in the scope of
the debugger itself).
CV* find_runcv(U32 *db_seqp)
Functions in file pp_pack.c
packlist
The engine implementing pack() Perl function.
void packlist(SV *cat, const char *pat,
const char *patend, SV **beglist,
SV **endlist)
unpackstring
The engine implementing unpack() Perl function. "unpackstring"
puts the extracted list items on the stack and returns the
number of elements. Issue "PUTBACK" before and "SPAGAIN" after
the call to this function.
I32 unpackstring(const char *pat,
const char *patend, const char *s,
const char *strend, U32 flags)
Functions in file pp_sys.c
setdefout
Sets PL_defoutgv, the default file handle for output, to the
passed in typeglob. As PL_defoutgv "owns" a reference on its
typeglob, the reference count of the passed in typeglob is
increased by one, and the reference count of the typeglob that
PL_defoutgv points to is decreased by one.
void setdefout(GV* gv)
Functions in file utf8.h
ibcmp_utf8
This is a synonym for (! foldEQ_utf8())
I32 ibcmp_utf8(const char *s1, char **pe1, UV l1,
bool u1, const char *s2, char **pe2,
UV l2, bool u2)
Functions in file util.h
ibcmp This is a synonym for (! foldEQ())
I32 ibcmp(const char* a, const char* b, I32 len)
ibcmp_locale
This is a synonym for (! foldEQ_locale())
I32 ibcmp_locale(const char* a, const char* b,
I32 len)
Global Variables
PL_check
Array, indexed by opcode, of functions that will be called for
the "check" phase of optree building during compilation of Perl
code. For most (but not all) types of op, once the op has been
initially built and populated with child ops it will be
filtered through the check function referenced by the
appropriate element of this array. The new op is passed in as
the sole argument to the check function, and the check function
returns the completed op. The check function may (as the name
suggests) check the op for validity and signal errors. It may
also initialise or modify parts of the ops, or perform more
radical surgery such as adding or removing child ops, or even
throw the op away and return a different op in its place.
This array of function pointers is a convenient place to hook
into the compilation process. An XS module can put its own
custom check function in place of any of the standard ones, to
influence the compilation of a particular type of op. However,
a custom check function must never fully replace a standard
check function (or even a custom check function from another
module). A module modifying checking must instead wrap the
preexisting check function. A custom check function must be
selective about when to apply its custom behaviour. In the
usual case where it decides not to do anything special with an
op, it must chain the preexisting op function. Check functions
are thus linked in a chain, with the core's base checker at the
end.
For thread safety, modules should not write directly to this
array. Instead, use the function "wrap_op_checker".
PL_keyword_plugin
Function pointer, pointing at a function used to handle
extended keywords. The function should be declared as
int keyword_plugin_function(pTHX_
char *keyword_ptr, STRLEN keyword_len,
OP **op_ptr)
The function is called from the tokeniser, whenever a possible
keyword is seen. "keyword_ptr" points at the word in the
parser's input buffer, and "keyword_len" gives its length; it
is not null-terminated. The function is expected to examine
the word, and possibly other state such as %^H, to decide
whether it wants to handle it as an extended keyword. If it
does not, the function should return "KEYWORD_PLUGIN_DECLINE",
and the normal parser process will continue.
If the function wants to handle the keyword, it first must
parse anything following the keyword that is part of the syntax
introduced by the keyword. See "Lexer interface" for details.
When a keyword is being handled, the plugin function must build
a tree of "OP" structures, representing the code that was
parsed. The root of the tree must be stored in *op_ptr. The
function then returns a constant indicating the syntactic role
of the construct that it has parsed: "KEYWORD_PLUGIN_STMT" if
it is a complete statement, or "KEYWORD_PLUGIN_EXPR" if it is
an expression. Note that a statement construct cannot be used
inside an expression (except via "do BLOCK" and similar), and
an expression is not a complete statement (it requires at least
a terminating semicolon).
When a keyword is handled, the plugin function may also have
(compile-time) side effects. It may modify "%^H", define
functions, and so on. Typically, if side effects are the main
purpose of a handler, it does not wish to generate any ops to
be included in the normal compilation. In this case it is
still required to supply an op tree, but it suffices to
generate a single null op.
That's how the *PL_keyword_plugin function needs to behave
overall. Conventionally, however, one does not completely
replace the existing handler function. Instead, take a copy of
"PL_keyword_plugin" before assigning your own function pointer
to it. Your handler function should look for keywords that it
is interested in and handle those. Where it is not interested,
it should call the saved plugin function, passing on the
arguments it received. Thus "PL_keyword_plugin" actually
points at a chain of handler functions, all of which have an
opportunity to handle keywords, and only the last function in
the chain (built into the Perl core) will normally return
"KEYWORD_PLUGIN_DECLINE".
NOTE: this function is experimental and may change or be
removed without notice.
GV Functions
GvSV Return the SV from the GV.
SV* GvSV(GV* gv)
gv_const_sv
If "gv" is a typeglob whose subroutine entry is a constant sub
eligible for inlining, or "gv" is a placeholder reference that
would be promoted to such a typeglob, then returns the value
returned by the sub. Otherwise, returns NULL.
SV* gv_const_sv(GV* gv)
gv_fetchmeth
Like "gv_fetchmeth_pvn", but lacks a flags parameter.
GV* gv_fetchmeth(HV* stash, const char* name,
STRLEN len, I32 level)
gv_fetchmethod_autoload
Returns the glob which contains the subroutine to call to
invoke the method on the "stash". In fact in the presence of
autoloading this may be the glob for "AUTOLOAD". In this case
the corresponding variable $AUTOLOAD is already setup.
The third parameter of "gv_fetchmethod_autoload" determines
whether AUTOLOAD lookup is performed if the given method is not
present: non-zero means yes, look for AUTOLOAD; zero means no,
don't look for AUTOLOAD. Calling "gv_fetchmethod" is
equivalent to calling "gv_fetchmethod_autoload" with a non-zero
"autoload" parameter.
These functions grant "SUPER" token as a prefix of the method
name. Note that if you want to keep the returned glob for a
long time, you need to check for it being "AUTOLOAD", since at
the later time the call may load a different subroutine due to
$AUTOLOAD changing its value. Use the glob created via a side
effect to do this.
These functions have the same side-effects and as
"gv_fetchmeth" with "level==0". "name" should be writable if
contains ':' or ' ''. The warning against passing the GV
returned by "gv_fetchmeth" to "call_sv" apply equally to these
functions.
GV* gv_fetchmethod_autoload(HV* stash,
const char* name,
I32 autoload)
gv_fetchmeth_autoload
This is the old form of "gv_fetchmeth_pvn_autoload", which has
no flags parameter.
GV* gv_fetchmeth_autoload(HV* stash,
const char* name,
STRLEN len, I32 level)
gv_fetchmeth_pv
Exactly like "gv_fetchmeth_pvn", but takes a nul-terminated
string instead of a string/length pair.
GV* gv_fetchmeth_pv(HV* stash, const char* name,
I32 level, U32 flags)
gv_fetchmeth_pvn
Returns the glob with the given "name" and a defined subroutine
or "NULL". The glob lives in the given "stash", or in the
stashes accessible via @ISA and UNIVERSAL::.
The argument "level" should be either 0 or -1. If "level==0",
as a side-effect creates a glob with the given "name" in the
given "stash" which in the case of success contains an alias
for the subroutine, and sets up caching info for this glob.
Currently, the only significant value for "flags" is SVf_UTF8.
This function grants "SUPER" token as a postfix of the stash
name. The GV returned from "gv_fetchmeth" may be a method cache
entry, which is not visible to Perl code. So when calling
"call_sv", you should not use the GV directly; instead, you
should use the method's CV, which can be obtained from the GV
with the "GvCV" macro.
GV* gv_fetchmeth_pvn(HV* stash, const char* name,
STRLEN len, I32 level,
U32 flags)
gv_fetchmeth_pvn_autoload
Same as gv_fetchmeth_pvn(), but looks for autoloaded
subroutines too. Returns a glob for the subroutine.
For an autoloaded subroutine without a GV, will create a GV
even if "level < 0". For an autoloaded subroutine without a
stub, GvCV() of the result may be zero.
Currently, the only significant value for "flags" is SVf_UTF8.
GV* gv_fetchmeth_pvn_autoload(HV* stash,
const char* name,
STRLEN len, I32 level,
U32 flags)
gv_fetchmeth_pv_autoload
Exactly like "gv_fetchmeth_pvn_autoload", but takes a nul-
terminated string instead of a string/length pair.
GV* gv_fetchmeth_pv_autoload(HV* stash,
const char* name,
I32 level, U32 flags)
gv_fetchmeth_sv
Exactly like "gv_fetchmeth_pvn", but takes the name string in
the form of an SV instead of a string/length pair.
GV* gv_fetchmeth_sv(HV* stash, SV* namesv,
I32 level, U32 flags)
gv_fetchmeth_sv_autoload
Exactly like "gv_fetchmeth_pvn_autoload", but takes the name
string in the form of an SV instead of a string/length pair.
GV* gv_fetchmeth_sv_autoload(HV* stash, SV* namesv,
I32 level, U32 flags)
gv_init The old form of gv_init_pvn(). It does not work with UTF8
strings, as it has no flags parameter. If the "multi"
parameter is set, the GV_ADDMULTI flag will be passed to
gv_init_pvn().
void gv_init(GV* gv, HV* stash, const char* name,
STRLEN len, int multi)
gv_init_pv
Same as gv_init_pvn(), but takes a nul-terminated string for
the name instead of separate char * and length parameters.
void gv_init_pv(GV* gv, HV* stash, const char* name,
U32 flags)
gv_init_pvn
Converts a scalar into a typeglob. This is an incoercible
typeglob; assigning a reference to it will assign to one of its
slots, instead of overwriting it as happens with typeglobs
created by SvSetSV. Converting any scalar that is SvOK() may
produce unpredictable results and is reserved for perl's
internal use.
"gv" is the scalar to be converted.
"stash" is the parent stash/package, if any.
"name" and "len" give the name. The name must be unqualified;
that is, it must not include the package name. If "gv" is a
stash element, it is the caller's responsibility to ensure that
the name passed to this function matches the name of the
element. If it does not match, perl's internal bookkeeping
will get out of sync.
"flags" can be set to SVf_UTF8 if "name" is a UTF8 string, or
the return value of SvUTF8(sv). It can also take the
GV_ADDMULTI flag, which means to pretend that the GV has been
seen before (i.e., suppress "Used once" warnings).
void gv_init_pvn(GV* gv, HV* stash, const char* name,
STRLEN len, U32 flags)
gv_init_sv
Same as gv_init_pvn(), but takes an SV * for the name instead
of separate char * and length parameters. "flags" is currently
unused.
void gv_init_sv(GV* gv, HV* stash, SV* namesv,
U32 flags)
gv_stashpv
Returns a pointer to the stash for a specified package. Uses
"strlen" to determine the length of "name", then calls
"gv_stashpvn()".
HV* gv_stashpv(const char* name, I32 flags)
gv_stashpvn
Returns a pointer to the stash for a specified package. The
"namelen" parameter indicates the length of the "name", in
bytes. "flags" is passed to "gv_fetchpvn_flags()", so if set
to "GV_ADD" then the package will be created if it does not
already exist. If the package does not exist and "flags" is 0
(or any other setting that does not create packages) then NULL
is returned.
HV* gv_stashpvn(const char* name, U32 namelen,
I32 flags)
gv_stashpvs
Like "gv_stashpvn", but takes a literal string instead of a
string/length pair.
HV* gv_stashpvs(const char* name, I32 create)
gv_stashsv
Returns a pointer to the stash for a specified package. See
"gv_stashpvn".
HV* gv_stashsv(SV* sv, I32 flags)
Handy Values
Nullav Null AV pointer.
(deprecated - use "(AV *)NULL" instead)
Nullch Null character pointer. (No longer available when "PERL_CORE"
is defined.)
Nullcv Null CV pointer.
(deprecated - use "(CV *)NULL" instead)
Nullhv Null HV pointer.
(deprecated - use "(HV *)NULL" instead)
Nullsv Null SV pointer. (No longer available when "PERL_CORE" is
defined.)
Hash Manipulation Functions
cop_fetch_label
Returns the label attached to a cop. The flags pointer may be
set to "SVf_UTF8" or 0.
NOTE: this function is experimental and may change or be
removed without notice.
const char * cop_fetch_label(COP *const cop,
STRLEN *len, U32 *flags)
cop_store_label
Save a label into a "cop_hints_hash". You need to set flags to
"SVf_UTF8" for a utf-8 label.
NOTE: this function is experimental and may change or be
removed without notice.
void cop_store_label(COP *const cop,
const char *label, STRLEN len,
U32 flags)
get_hv Returns the HV of the specified Perl hash. "flags" are passed
to "gv_fetchpv". If "GV_ADD" is set and the Perl variable does
not exist then it will be created. If "flags" is zero and the
variable does not exist then NULL is returned.
NOTE: the perl_ form of this function is deprecated.
HV* get_hv(const char *name, I32 flags)
HEf_SVKEY
This flag, used in the length slot of hash entries and magic
structures, specifies the structure contains an "SV*" pointer
where a "char*" pointer is to be expected. (For information
only--not to be used).
HeHASH Returns the computed hash stored in the hash entry.
U32 HeHASH(HE* he)
HeKEY Returns the actual pointer stored in the key slot of the hash
entry. The pointer may be either "char*" or "SV*", depending on
the value of "HeKLEN()". Can be assigned to. The "HePV()" or
"HeSVKEY()" macros are usually preferable for finding the value
of a key.
void* HeKEY(HE* he)
HeKLEN If this is negative, and amounts to "HEf_SVKEY", it indicates
the entry holds an "SV*" key. Otherwise, holds the actual
length of the key. Can be assigned to. The "HePV()" macro is
usually preferable for finding key lengths.
STRLEN HeKLEN(HE* he)
HePV Returns the key slot of the hash entry as a "char*" value,
doing any necessary dereferencing of possibly "SV*" keys. The
length of the string is placed in "len" (this is a macro, so do
not use &len). If you do not care about what the length of the
key is, you may use the global variable "PL_na", though this is
rather less efficient than using a local variable. Remember
though, that hash keys in perl are free to contain embedded
nulls, so using "strlen()" or similar is not a good way to find
the length of hash keys. This is very similar to the "SvPV()"
macro described elsewhere in this document. See also "HeUTF8".
If you are using "HePV" to get values to pass to "newSVpvn()"
to create a new SV, you should consider using
"newSVhek(HeKEY_hek(he))" as it is more efficient.
char* HePV(HE* he, STRLEN len)
HeSVKEY Returns the key as an "SV*", or "NULL" if the hash entry does
not contain an "SV*" key.
SV* HeSVKEY(HE* he)
HeSVKEY_force
Returns the key as an "SV*". Will create and return a
temporary mortal "SV*" if the hash entry contains only a
"char*" key.
SV* HeSVKEY_force(HE* he)
HeSVKEY_set
Sets the key to a given "SV*", taking care to set the
appropriate flags to indicate the presence of an "SV*" key, and
returns the same "SV*".
SV* HeSVKEY_set(HE* he, SV* sv)
HeUTF8 Returns whether the "char *" value returned by "HePV" is
encoded in UTF-8, doing any necessary dereferencing of possibly
"SV*" keys. The value returned will be 0 or non-0, not
necessarily 1 (or even a value with any low bits set), so do
not blindly assign this to a "bool" variable, as "bool" may be
a typedef for "char".
char* HeUTF8(HE* he)
HeVAL Returns the value slot (type "SV*") stored in the hash entry.
SV* HeVAL(HE* he)
HvENAME Returns the effective name of a stash, or NULL if there is
none. The effective name represents a location in the symbol
table where this stash resides. It is updated automatically
when packages are aliased or deleted. A stash that is no
longer in the symbol table has no effective name. This name is
preferable to "HvNAME" for use in MRO linearisations and isa
caches.
char* HvENAME(HV* stash)
HvENAMELEN
Returns the length of the stash's effective name.
STRLEN HvENAMELEN(HV *stash)
HvENAMEUTF8
Returns true if the effective name is in UTF8 encoding.
unsigned char HvENAMEUTF8(HV *stash)
HvNAME Returns the package name of a stash, or NULL if "stash" isn't a
stash. See "SvSTASH", "CvSTASH".
char* HvNAME(HV* stash)
HvNAMELEN
Returns the length of the stash's name.
STRLEN HvNAMELEN(HV *stash)
HvNAMEUTF8
Returns true if the name is in UTF8 encoding.
unsigned char HvNAMEUTF8(HV *stash)
hv_assert
Check that a hash is in an internally consistent state.
void hv_assert(HV *hv)
hv_clear
Frees the all the elements of a hash, leaving it empty. The XS
equivalent of "%hash = ()". See also "hv_undef".
If any destructors are triggered as a result, the hv itself may
be freed.
void hv_clear(HV *hv)
hv_clear_placeholders
Clears any placeholders from a hash. If a restricted hash has
any of its keys marked as readonly and the key is subsequently
deleted, the key is not actually deleted but is marked by
assigning it a value of &PL_sv_placeholder. This tags it so it
will be ignored by future operations such as iterating over the
hash, but will still allow the hash to have a value reassigned
to the key at some future point. This function clears any such
placeholder keys from the hash. See Hash::Util::lock_keys()
for an example of its use.
void hv_clear_placeholders(HV *hv)
hv_copy_hints_hv
A specialised version of "newHVhv" for copying "%^H". ohv must
be a pointer to a hash (which may have "%^H" magic, but should
be generally non-magical), or "NULL" (interpreted as an empty
hash). The content of ohv is copied to a new hash, which has
the "%^H"-specific magic added to it. A pointer to the new
hash is returned.
HV * hv_copy_hints_hv(HV *ohv)
hv_delete
Deletes a key/value pair in the hash. The value's SV is
removed from the hash, made mortal, and returned to the caller.
The absolute value of "klen" is the length of the key. If
"klen" is negative the key is assumed to be in UTF-8-encoded
Unicode. The "flags" value will normally be zero; if set to
G_DISCARD then NULL will be returned. NULL will also be
returned if the key is not found.
SV* hv_delete(HV *hv, const char *key, I32 klen,
I32 flags)
hv_delete_ent
Deletes a key/value pair in the hash. The value SV is removed
from the hash, made mortal, and returned to the caller. The
"flags" value will normally be zero; if set to G_DISCARD then
NULL will be returned. NULL will also be returned if the key
is not found. "hash" can be a valid precomputed hash value, or
0 to ask for it to be computed.
SV* hv_delete_ent(HV *hv, SV *keysv, I32 flags,
U32 hash)
hv_exists
Returns a boolean indicating whether the specified hash key
exists. The absolute value of "klen" is the length of the key.
If "klen" is negative the key is assumed to be in UTF-8-encoded
Unicode.
bool hv_exists(HV *hv, const char *key, I32 klen)
hv_exists_ent
Returns a boolean indicating whether the specified hash key
exists. "hash" can be a valid precomputed hash value, or 0 to
ask for it to be computed.
bool hv_exists_ent(HV *hv, SV *keysv, U32 hash)
hv_fetch
Returns the SV which corresponds to the specified key in the
hash. The absolute value of "klen" is the length of the key.
If "klen" is negative the key is assumed to be in UTF-8-encoded
Unicode. If "lval" is set then the fetch will be part of a
store. Check that the return value is non-null before
dereferencing it to an "SV*".
See "Understanding the Magic of Tied Hashes and Arrays" in
perlguts for more information on how to use this function on
tied hashes.
SV** hv_fetch(HV *hv, const char *key, I32 klen,
I32 lval)
hv_fetchs
Like "hv_fetch", but takes a literal string instead of a
string/length pair.
SV** hv_fetchs(HV* tb, const char* key, I32 lval)
hv_fetch_ent
Returns the hash entry which corresponds to the specified key
in the hash. "hash" must be a valid precomputed hash number
for the given "key", or 0 if you want the function to compute
it. IF "lval" is set then the fetch will be part of a store.
Make sure the return value is non-null before accessing it.
The return value when "hv" is a tied hash is a pointer to a
static location, so be sure to make a copy of the structure if
you need to store it somewhere.
See "Understanding the Magic of Tied Hashes and Arrays" in
perlguts for more information on how to use this function on
tied hashes.
HE* hv_fetch_ent(HV *hv, SV *keysv, I32 lval,
U32 hash)
hv_fill Returns the number of hash buckets that happen to be in use.
This function is wrapped by the macro "HvFILL".
Previously this value was stored in the HV structure, rather
than being calculated on demand.
STRLEN hv_fill(HV const *const hv)
hv_iterinit
Prepares a starting point to traverse a hash table. Returns
the number of keys in the hash (i.e. the same as
"HvUSEDKEYS(hv)"). The return value is currently only
meaningful for hashes without tie magic.
NOTE: Before version 5.004_65, "hv_iterinit" used to return the
number of hash buckets that happen to be in use. If you still
need that esoteric value, you can get it through the macro
"HvFILL(hv)".
I32 hv_iterinit(HV *hv)
hv_iterkey
Returns the key from the current position of the hash iterator.
See "hv_iterinit".
char* hv_iterkey(HE* entry, I32* retlen)
hv_iterkeysv
Returns the key as an "SV*" from the current position of the
hash iterator. The return value will always be a mortal copy
of the key. Also see "hv_iterinit".
SV* hv_iterkeysv(HE* entry)
hv_iternext
Returns entries from a hash iterator. See "hv_iterinit".
You may call "hv_delete" or "hv_delete_ent" on the hash entry
that the iterator currently points to, without losing your
place or invalidating your iterator. Note that in this case
the current entry is deleted from the hash with your iterator
holding the last reference to it. Your iterator is flagged to
free the entry on the next call to "hv_iternext", so you must
not discard your iterator immediately else the entry will leak
- call "hv_iternext" to trigger the resource deallocation.
HE* hv_iternext(HV *hv)
hv_iternextsv
Performs an "hv_iternext", "hv_iterkey", and "hv_iterval" in
one operation.
SV* hv_iternextsv(HV *hv, char **key, I32 *retlen)
hv_iternext_flags
Returns entries from a hash iterator. See "hv_iterinit" and
"hv_iternext". The "flags" value will normally be zero; if
HV_ITERNEXT_WANTPLACEHOLDERS is set the placeholders keys (for
restricted hashes) will be returned in addition to normal keys.
By default placeholders are automatically skipped over.
Currently a placeholder is implemented with a value that is
&PL_sv_placeholder. Note that the implementation of
placeholders and restricted hashes may change, and the
implementation currently is insufficiently abstracted for any
change to be tidy.
NOTE: this function is experimental and may change or be
removed without notice.
HE* hv_iternext_flags(HV *hv, I32 flags)
hv_iterval
Returns the value from the current position of the hash
iterator. See "hv_iterkey".
SV* hv_iterval(HV *hv, HE *entry)
hv_magic
Adds magic to a hash. See "sv_magic".
void hv_magic(HV *hv, GV *gv, int how)
hv_scalar
Evaluates the hash in scalar context and returns the result.
Handles magic when the hash is tied.
SV* hv_scalar(HV *hv)
hv_store
Stores an SV in a hash. The hash key is specified as "key" and
the absolute value of "klen" is the length of the key. If
"klen" is negative the key is assumed to be in UTF-8-encoded
Unicode. The "hash" parameter is the precomputed hash value;
if it is zero then Perl will compute it.
The return value will be NULL if the operation failed or if the
value did not need to be actually stored within the hash (as in
the case of tied hashes). Otherwise it can be dereferenced to
get the original "SV*". Note that the caller is responsible
for suitably incrementing the reference count of "val" before
the call, and decrementing it if the function returned NULL.
Effectively a successful hv_store takes ownership of one
reference to "val". This is usually what you want; a newly
created SV has a reference count of one, so if all your code
does is create SVs then store them in a hash, hv_store will own
the only reference to the new SV, and your code doesn't need to
do anything further to tidy up. hv_store is not implemented as
a call to hv_store_ent, and does not create a temporary SV for
the key, so if your key data is not already in SV form then use
hv_store in preference to hv_store_ent.
See "Understanding the Magic of Tied Hashes and Arrays" in
perlguts for more information on how to use this function on
tied hashes.
SV** hv_store(HV *hv, const char *key, I32 klen,
SV *val, U32 hash)
hv_stores
Like "hv_store", but takes a literal string instead of a
string/length pair and omits the hash parameter.
SV** hv_stores(HV* tb, const char* key,
NULLOK SV* val)
hv_store_ent
Stores "val" in a hash. The hash key is specified as "key".
The "hash" parameter is the precomputed hash value; if it is
zero then Perl will compute it. The return value is the new
hash entry so created. It will be NULL if the operation failed
or if the value did not need to be actually stored within the
hash (as in the case of tied hashes). Otherwise the contents
of the return value can be accessed using the "He?" macros
described here. Note that the caller is responsible for
suitably incrementing the reference count of "val" before the
call, and decrementing it if the function returned NULL.
Effectively a successful hv_store_ent takes ownership of one
reference to "val". This is usually what you want; a newly
created SV has a reference count of one, so if all your code
does is create SVs then store them in a hash, hv_store will own
the only reference to the new SV, and your code doesn't need to
do anything further to tidy up. Note that hv_store_ent only
reads the "key"; unlike "val" it does not take ownership of it,
so maintaining the correct reference count on "key" is entirely
the caller's responsibility. hv_store is not implemented as a
call to hv_store_ent, and does not create a temporary SV for
the key, so if your key data is not already in SV form then use
hv_store in preference to hv_store_ent.
See "Understanding the Magic of Tied Hashes and Arrays" in
perlguts for more information on how to use this function on
tied hashes.
HE* hv_store_ent(HV *hv, SV *key, SV *val, U32 hash)
hv_undef
Undefines the hash. The XS equivalent of "undef(%hash)".
As well as freeing all the elements of the hash (like
hv_clear()), this also frees any auxiliary data and storage
associated with the hash.
If any destructors are triggered as a result, the hv itself may
be freed.
See also "hv_clear".
void hv_undef(HV *hv)
newHV Creates a new HV. The reference count is set to 1.
HV* newHV()
Hook manipulation
wrap_op_checker
Puts a C function into the chain of check functions for a
specified op type. This is the preferred way to manipulate the
"PL_check" array. opcode specifies which type of op is to be
affected. new_checker is a pointer to the C function that is
to be added to that opcode's check chain, and old_checker_p
points to the storage location where a pointer to the next
function in the chain will be stored. The value of new_pointer
is written into the "PL_check" array, while the value
previously stored there is written to *old_checker_p.
"PL_check" is global to an entire process, and a module wishing
to hook op checking may find itself invoked more than once per
process, typically in different threads. To handle that
situation, this function is idempotent. The location
*old_checker_p must initially (once per process) contain a null
pointer. A C variable of static duration (declared at file
scope, typically also marked "static" to give it internal
linkage) will be implicitly initialised appropriately, if it
does not have an explicit initialiser. This function will only
actually modify the check chain if it finds *old_checker_p to
be null. This function is also thread safe on the small scale.
It uses appropriate locking to avoid race conditions in
accessing "PL_check".
When this function is called, the function referenced by
new_checker must be ready to be called, except for
*old_checker_p being unfilled. In a threading situation,
new_checker may be called immediately, even before this
function has returned. *old_checker_p will always be
appropriately set before new_checker is called. If new_checker
decides not to do anything special with an op that it is given
(which is the usual case for most uses of op check hooking), it
must chain the check function referenced by *old_checker_p.
If you want to influence compilation of calls to a specific
subroutine, then use "cv_set_call_checker" rather than hooking
checking of all "entersub" ops.
void wrap_op_checker(Optype opcode,
Perl_check_t new_checker,
Perl_check_t *old_checker_p)
Lexer interface
lex_bufutf8
Indicates whether the octets in the lexer buffer
("PL_parser->linestr") should be interpreted as the UTF-8
encoding of Unicode characters. If not, they should be
interpreted as Latin-1 characters. This is analogous to the
"SvUTF8" flag for scalars.
In UTF-8 mode, it is not guaranteed that the lexer buffer
actually contains valid UTF-8. Lexing code must be robust in
the face of invalid encoding.
The actual "SvUTF8" flag of the "PL_parser->linestr" scalar is
significant, but not the whole story regarding the input
character encoding. Normally, when a file is being read, the
scalar contains octets and its "SvUTF8" flag is off, but the
octets should be interpreted as UTF-8 if the "use utf8" pragma
is in effect. During a string eval, however, the scalar may
have the "SvUTF8" flag on, and in this case its octets should
be interpreted as UTF-8 unless the "use bytes" pragma is in
effect. This logic may change in the future; use this function
instead of implementing the logic yourself.
NOTE: this function is experimental and may change or be
removed without notice.
bool lex_bufutf8()
lex_discard_to
Discards the first part of the "PL_parser->linestr" buffer, up
to ptr. The remaining content of the buffer will be moved, and
all pointers into the buffer updated appropriately. ptr must
not be later in the buffer than the position of
"PL_parser->bufptr": it is not permitted to discard text that
has yet to be lexed.
Normally it is not necessarily to do this directly, because it
suffices to use the implicit discarding behaviour of
"lex_next_chunk" and things based on it. However, if a token
stretches across multiple lines, and the lexing code has kept
multiple lines of text in the buffer for that purpose, then
after completion of the token it would be wise to explicitly
discard the now-unneeded earlier lines, to avoid future multi-
line tokens growing the buffer without bound.
NOTE: this function is experimental and may change or be
removed without notice.
void lex_discard_to(char *ptr)
lex_grow_linestr
Reallocates the lexer buffer ("PL_parser->linestr") to
accommodate at least len octets (including terminating NUL).
Returns a pointer to the reallocated buffer. This is necessary
before making any direct modification of the buffer that would
increase its length. "lex_stuff_pvn" provides a more
convenient way to insert text into the buffer.
Do not use "SvGROW" or "sv_grow" directly on
"PL_parser->linestr"; this function updates all of the lexer's
variables that point directly into the buffer.
NOTE: this function is experimental and may change or be
removed without notice.
char * lex_grow_linestr(STRLEN len)
lex_next_chunk
Reads in the next chunk of text to be lexed, appending it to
"PL_parser->linestr". This should be called when lexing code
has looked to the end of the current chunk and wants to know
more. It is usual, but not necessary, for lexing to have
consumed the entirety of the current chunk at this time.
If "PL_parser->bufptr" is pointing to the very end of the
current chunk (i.e., the current chunk has been entirely
consumed), normally the current chunk will be discarded at the
same time that the new chunk is read in. If flags includes
"LEX_KEEP_PREVIOUS", the current chunk will not be discarded.
If the current chunk has not been entirely consumed, then it
will not be discarded regardless of the flag.
Returns true if some new text was added to the buffer, or false
if the buffer has reached the end of the input text.
NOTE: this function is experimental and may change or be
removed without notice.
bool lex_next_chunk(U32 flags)
lex_peek_unichar
Looks ahead one (Unicode) character in the text currently being
lexed. Returns the codepoint (unsigned integer value) of the
next character, or -1 if lexing has reached the end of the
input text. To consume the peeked character, use
"lex_read_unichar".
If the next character is in (or extends into) the next chunk of
input text, the next chunk will be read in. Normally the
current chunk will be discarded at the same time, but if flags
includes "LEX_KEEP_PREVIOUS" then the current chunk will not be
discarded.
If the input is being interpreted as UTF-8 and a UTF-8 encoding
error is encountered, an exception is generated.
NOTE: this function is experimental and may change or be
removed without notice.
I32 lex_peek_unichar(U32 flags)
lex_read_space
Reads optional spaces, in Perl style, in the text currently
being lexed. The spaces may include ordinary whitespace
characters and Perl-style comments. "#line" directives are
processed if encountered. "PL_parser->bufptr" is moved past
the spaces, so that it points at a non-space character (or the
end of the input text).
If spaces extend into the next chunk of input text, the next
chunk will be read in. Normally the current chunk will be
discarded at the same time, but if flags includes
"LEX_KEEP_PREVIOUS" then the current chunk will not be
discarded.
NOTE: this function is experimental and may change or be
removed without notice.
void lex_read_space(U32 flags)
lex_read_to
Consume text in the lexer buffer, from "PL_parser->bufptr" up
to ptr. This advances "PL_parser->bufptr" to match ptr,
performing the correct bookkeeping whenever a newline character
is passed. This is the normal way to consume lexed text.
Interpretation of the buffer's octets can be abstracted out by
using the slightly higher-level functions "lex_peek_unichar"
and "lex_read_unichar".
NOTE: this function is experimental and may change or be
removed without notice.
void lex_read_to(char *ptr)
lex_read_unichar
Reads the next (Unicode) character in the text currently being
lexed. Returns the codepoint (unsigned integer value) of the
character read, and moves "PL_parser->bufptr" past the
character, or returns -1 if lexing has reached the end of the
input text. To non-destructively examine the next character,
use "lex_peek_unichar" instead.
If the next character is in (or extends into) the next chunk of
input text, the next chunk will be read in. Normally the
current chunk will be discarded at the same time, but if flags
includes "LEX_KEEP_PREVIOUS" then the current chunk will not be
discarded.
If the input is being interpreted as UTF-8 and a UTF-8 encoding
error is encountered, an exception is generated.
NOTE: this function is experimental and may change or be
removed without notice.
I32 lex_read_unichar(U32 flags)
lex_start
Creates and initialises a new lexer/parser state object,
supplying a context in which to lex and parse from a new source
of Perl code. A pointer to the new state object is placed in
"PL_parser". An entry is made on the save stack so that upon
unwinding the new state object will be destroyed and the former
value of "PL_parser" will be restored. Nothing else need be
done to clean up the parsing context.
The code to be parsed comes from line and rsfp. line, if non-
null, provides a string (in SV form) containing code to be
parsed. A copy of the string is made, so subsequent
modification of line does not affect parsing. rsfp, if non-
null, provides an input stream from which code will be read to
be parsed. If both are non-null, the code in line comes first
and must consist of complete lines of input, and rsfp supplies
the remainder of the source.
The flags parameter is reserved for future use. Currently it
is only used by perl internally, so extensions should always
pass zero.
NOTE: this function is experimental and may change or be
removed without notice.
void lex_start(SV *line, PerlIO *rsfp, U32 flags)
lex_stuff_pv
Insert characters into the lexer buffer ("PL_parser->linestr"),
immediately after the current lexing point
("PL_parser->bufptr"), reallocating the buffer if necessary.
This means that lexing code that runs later will see the
characters as if they had appeared in the input. It is not
recommended to do this as part of normal parsing, and most uses
of this facility run the risk of the inserted characters being
interpreted in an unintended manner.
The string to be inserted is represented by octets starting at
pv and continuing to the first nul. These octets are
interpreted as either UTF-8 or Latin-1, according to whether
the "LEX_STUFF_UTF8" flag is set in flags. The characters are
recoded for the lexer buffer, according to how the buffer is
currently being interpreted ("lex_bufutf8"). If it is not
convenient to nul-terminate a string to be inserted, the
"lex_stuff_pvn" function is more appropriate.
NOTE: this function is experimental and may change or be
removed without notice.
void lex_stuff_pv(const char *pv, U32 flags)
lex_stuff_pvn
Insert characters into the lexer buffer ("PL_parser->linestr"),
immediately after the current lexing point
("PL_parser->bufptr"), reallocating the buffer if necessary.
This means that lexing code that runs later will see the
characters as if they had appeared in the input. It is not
recommended to do this as part of normal parsing, and most uses
of this facility run the risk of the inserted characters being
interpreted in an unintended manner.
The string to be inserted is represented by len octets starting
at pv. These octets are interpreted as either UTF-8 or
Latin-1, according to whether the "LEX_STUFF_UTF8" flag is set
in flags. The characters are recoded for the lexer buffer,
according to how the buffer is currently being interpreted
("lex_bufutf8"). If a string to be inserted is available as a
Perl scalar, the "lex_stuff_sv" function is more convenient.
NOTE: this function is experimental and may change or be
removed without notice.
void lex_stuff_pvn(const char *pv, STRLEN len,
U32 flags)
lex_stuff_pvs
Like "lex_stuff_pvn", but takes a literal string instead of a
string/length pair.
NOTE: this function is experimental and may change or be
removed without notice.
void lex_stuff_pvs(const char *pv, U32 flags)
lex_stuff_sv
Insert characters into the lexer buffer ("PL_parser->linestr"),
immediately after the current lexing point
("PL_parser->bufptr"), reallocating the buffer if necessary.
This means that lexing code that runs later will see the
characters as if they had appeared in the input. It is not
recommended to do this as part of normal parsing, and most uses
of this facility run the risk of the inserted characters being
interpreted in an unintended manner.
The string to be inserted is the string value of sv. The
characters are recoded for the lexer buffer, according to how
the buffer is currently being interpreted ("lex_bufutf8"). If
a string to be inserted is not already a Perl scalar, the
"lex_stuff_pvn" function avoids the need to construct a scalar.
NOTE: this function is experimental and may change or be
removed without notice.
void lex_stuff_sv(SV *sv, U32 flags)
lex_unstuff
Discards text about to be lexed, from "PL_parser->bufptr" up to
ptr. Text following ptr will be moved, and the buffer
shortened. This hides the discarded text from any lexing code
that runs later, as if the text had never appeared.
This is not the normal way to consume lexed text. For that,
use "lex_read_to".
NOTE: this function is experimental and may change or be
removed without notice.
void lex_unstuff(char *ptr)
parse_arithexpr
Parse a Perl arithmetic expression. This may contain operators
of precedence down to the bit shift operators. The expression
must be followed (and thus terminated) either by a comparison
or lower-precedence operator or by something that would
normally terminate an expression such as semicolon. If flags
includes "PARSE_OPTIONAL" then the expression is optional,
otherwise it is mandatory. It is up to the caller to ensure
that the dynamic parser state ("PL_parser" et al) is correctly
set to reflect the source of the code to be parsed and the
lexical context for the expression.
The op tree representing the expression is returned. If an
optional expression is absent, a null pointer is returned,
otherwise the pointer will be non-null.
If an error occurs in parsing or compilation, in most cases a
valid op tree is returned anyway. The error is reflected in
the parser state, normally resulting in a single exception at
the top level of parsing which covers all the compilation
errors that occurred. Some compilation errors, however, will
throw an exception immediately.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_arithexpr(U32 flags)
parse_barestmt
Parse a single unadorned Perl statement. This may be a normal
imperative statement or a declaration that has compile-time
effect. It does not include any label or other affixture. It
is up to the caller to ensure that the dynamic parser state
("PL_parser" et al) is correctly set to reflect the source of
the code to be parsed and the lexical context for the
statement.
The op tree representing the statement is returned. This may
be a null pointer if the statement is null, for example if it
was actually a subroutine definition (which has compile-time
side effects). If not null, it will be ops directly
implementing the statement, suitable to pass to "newSTATEOP".
It will not normally include a "nextstate" or equivalent op
(except for those embedded in a scope contained entirely within
the statement).
If an error occurs in parsing or compilation, in most cases a
valid op tree (most likely null) is returned anyway. The error
is reflected in the parser state, normally resulting in a
single exception at the top level of parsing which covers all
the compilation errors that occurred. Some compilation errors,
however, will throw an exception immediately.
The flags parameter is reserved for future use, and must always
be zero.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_barestmt(U32 flags)
parse_block
Parse a single complete Perl code block. This consists of an
opening brace, a sequence of statements, and a closing brace.
The block constitutes a lexical scope, so "my" variables and
various compile-time effects can be contained within it. It is
up to the caller to ensure that the dynamic parser state
("PL_parser" et al) is correctly set to reflect the source of
the code to be parsed and the lexical context for the
statement.
The op tree representing the code block is returned. This is
always a real op, never a null pointer. It will normally be a
"lineseq" list, including "nextstate" or equivalent ops. No
ops to construct any kind of runtime scope are included by
virtue of it being a block.
If an error occurs in parsing or compilation, in most cases a
valid op tree (most likely null) is returned anyway. The error
is reflected in the parser state, normally resulting in a
single exception at the top level of parsing which covers all
the compilation errors that occurred. Some compilation errors,
however, will throw an exception immediately.
The flags parameter is reserved for future use, and must always
be zero.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_block(U32 flags)
parse_fullexpr
Parse a single complete Perl expression. This allows the full
expression grammar, including the lowest-precedence operators
such as "or". The expression must be followed (and thus
terminated) by a token that an expression would normally be
terminated by: end-of-file, closing bracketing punctuation,
semicolon, or one of the keywords that signals a postfix
expression-statement modifier. If flags includes
"PARSE_OPTIONAL" then the expression is optional, otherwise it
is mandatory. It is up to the caller to ensure that the
dynamic parser state ("PL_parser" et al) is correctly set to
reflect the source of the code to be parsed and the lexical
context for the expression.
The op tree representing the expression is returned. If an
optional expression is absent, a null pointer is returned,
otherwise the pointer will be non-null.
If an error occurs in parsing or compilation, in most cases a
valid op tree is returned anyway. The error is reflected in
the parser state, normally resulting in a single exception at
the top level of parsing which covers all the compilation
errors that occurred. Some compilation errors, however, will
throw an exception immediately.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_fullexpr(U32 flags)
parse_fullstmt
Parse a single complete Perl statement. This may be a normal
imperative statement or a declaration that has compile-time
effect, and may include optional labels. It is up to the
caller to ensure that the dynamic parser state ("PL_parser" et
al) is correctly set to reflect the source of the code to be
parsed and the lexical context for the statement.
The op tree representing the statement is returned. This may
be a null pointer if the statement is null, for example if it
was actually a subroutine definition (which has compile-time
side effects). If not null, it will be the result of a
"newSTATEOP" call, normally including a "nextstate" or
equivalent op.
If an error occurs in parsing or compilation, in most cases a
valid op tree (most likely null) is returned anyway. The error
is reflected in the parser state, normally resulting in a
single exception at the top level of parsing which covers all
the compilation errors that occurred. Some compilation errors,
however, will throw an exception immediately.
The flags parameter is reserved for future use, and must always
be zero.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_fullstmt(U32 flags)
parse_label
Parse a single label, possibly optional, of the type that may
prefix a Perl statement. It is up to the caller to ensure that
the dynamic parser state ("PL_parser" et al) is correctly set
to reflect the source of the code to be parsed. If flags
includes "PARSE_OPTIONAL" then the label is optional, otherwise
it is mandatory.
The name of the label is returned in the form of a fresh
scalar. If an optional label is absent, a null pointer is
returned.
If an error occurs in parsing, which can only occur if the
label is mandatory, a valid label is returned anyway. The
error is reflected in the parser state, normally resulting in a
single exception at the top level of parsing which covers all
the compilation errors that occurred.
NOTE: this function is experimental and may change or be
removed without notice.
SV * parse_label(U32 flags)
parse_listexpr
Parse a Perl list expression. This may contain operators of
precedence down to the comma operator. The expression must be
followed (and thus terminated) either by a low-precedence logic
operator such as "or" or by something that would normally
terminate an expression such as semicolon. If flags includes
"PARSE_OPTIONAL" then the expression is optional, otherwise it
is mandatory. It is up to the caller to ensure that the
dynamic parser state ("PL_parser" et al) is correctly set to
reflect the source of the code to be parsed and the lexical
context for the expression.
The op tree representing the expression is returned. If an
optional expression is absent, a null pointer is returned,
otherwise the pointer will be non-null.
If an error occurs in parsing or compilation, in most cases a
valid op tree is returned anyway. The error is reflected in
the parser state, normally resulting in a single exception at
the top level of parsing which covers all the compilation
errors that occurred. Some compilation errors, however, will
throw an exception immediately.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_listexpr(U32 flags)
parse_stmtseq
Parse a sequence of zero or more Perl statements. These may be
normal imperative statements, including optional labels, or
declarations that have compile-time effect, or any mixture
thereof. The statement sequence ends when a closing brace or
end-of-file is encountered in a place where a new statement
could have validly started. It is up to the caller to ensure
that the dynamic parser state ("PL_parser" et al) is correctly
set to reflect the source of the code to be parsed and the
lexical context for the statements.
The op tree representing the statement sequence is returned.
This may be a null pointer if the statements were all null, for
example if there were no statements or if there were only
subroutine definitions (which have compile-time side effects).
If not null, it will be a "lineseq" list, normally including
"nextstate" or equivalent ops.
If an error occurs in parsing or compilation, in most cases a
valid op tree is returned anyway. The error is reflected in
the parser state, normally resulting in a single exception at
the top level of parsing which covers all the compilation
errors that occurred. Some compilation errors, however, will
throw an exception immediately.
The flags parameter is reserved for future use, and must always
be zero.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_stmtseq(U32 flags)
parse_termexpr
Parse a Perl term expression. This may contain operators of
precedence down to the assignment operators. The expression
must be followed (and thus terminated) either by a comma or
lower-precedence operator or by something that would normally
terminate an expression such as semicolon. If flags includes
"PARSE_OPTIONAL" then the expression is optional, otherwise it
is mandatory. It is up to the caller to ensure that the
dynamic parser state ("PL_parser" et al) is correctly set to
reflect the source of the code to be parsed and the lexical
context for the expression.
The op tree representing the expression is returned. If an
optional expression is absent, a null pointer is returned,
otherwise the pointer will be non-null.
If an error occurs in parsing or compilation, in most cases a
valid op tree is returned anyway. The error is reflected in
the parser state, normally resulting in a single exception at
the top level of parsing which covers all the compilation
errors that occurred. Some compilation errors, however, will
throw an exception immediately.
NOTE: this function is experimental and may change or be
removed without notice.
OP * parse_termexpr(U32 flags)
PL_parser
Pointer to a structure encapsulating the state of the parsing
operation currently in progress. The pointer can be locally
changed to perform a nested parse without interfering with the
state of an outer parse. Individual members of "PL_parser"
have their own documentation.
PL_parser->bufend
Direct pointer to the end of the chunk of text currently being
lexed, the end of the lexer buffer. This is equal to
"SvPVX(PL_parser->linestr) + SvCUR(PL_parser->linestr)". A NUL
character (zero octet) is always located at the end of the
buffer, and does not count as part of the buffer's contents.
NOTE: this function is experimental and may change or be
removed without notice.
PL_parser->bufptr
Points to the current position of lexing inside the lexer
buffer. Characters around this point may be freely examined,
within the range delimited by "SvPVX("PL_parser->linestr")" and
"PL_parser->bufend". The octets of the buffer may be intended
to be interpreted as either UTF-8 or Latin-1, as indicated by
"lex_bufutf8".
Lexing code (whether in the Perl core or not) moves this
pointer past the characters that it consumes. It is also
expected to perform some bookkeeping whenever a newline
character is consumed. This movement can be more conveniently
performed by the function "lex_read_to", which handles newlines
appropriately.
Interpretation of the buffer's octets can be abstracted out by
using the slightly higher-level functions "lex_peek_unichar"
and "lex_read_unichar".
NOTE: this function is experimental and may change or be
removed without notice.
PL_parser->linestart
Points to the start of the current line inside the lexer
buffer. This is useful for indicating at which column an error
occurred, and not much else. This must be updated by any
lexing code that consumes a newline; the function "lex_read_to"
handles this detail.
NOTE: this function is experimental and may change or be
removed without notice.
PL_parser->linestr
Buffer scalar containing the chunk currently under
consideration of the text currently being lexed. This is
always a plain string scalar (for which "SvPOK" is true). It
is not intended to be used as a scalar by normal scalar means;
instead refer to the buffer directly by the pointer variables
described below.
The lexer maintains various "char*" pointers to things in the
"PL_parser->linestr" buffer. If "PL_parser->linestr" is ever
reallocated, all of these pointers must be updated. Don't
attempt to do this manually, but rather use "lex_grow_linestr"
if you need to reallocate the buffer.
The content of the text chunk in the buffer is commonly exactly
one complete line of input, up to and including a newline
terminator, but there are situations where it is otherwise.
The octets of the buffer may be intended to be interpreted as
either UTF-8 or Latin-1. The function "lex_bufutf8" tells you
which. Do not use the "SvUTF8" flag on this scalar, which may
disagree with it.
For direct examination of the buffer, the variable
"PL_parser->bufend" points to the end of the buffer. The
current lexing position is pointed to by "PL_parser->bufptr".
Direct use of these pointers is usually preferable to
examination of the scalar through normal scalar means.
NOTE: this function is experimental and may change or be
removed without notice.
Magical Functions
mg_clear
Clear something magical that the SV represents. See
"sv_magic".
int mg_clear(SV* sv)
mg_copy Copies the magic from one SV to another. See "sv_magic".
int mg_copy(SV *sv, SV *nsv, const char *key,
I32 klen)
mg_find Finds the magic pointer for type matching the SV. See
"sv_magic".
MAGIC* mg_find(const SV* sv, int type)
mg_findext
Finds the magic pointer of "type" with the given "vtbl" for the
"SV". See "sv_magicext".
MAGIC* mg_findext(const SV* sv, int type,
const MGVTBL *vtbl)
mg_free Free any magic storage used by the SV. See "sv_magic".
int mg_free(SV* sv)
mg_free_type
Remove any magic of type how from the SV sv. See "sv_magic".
void mg_free_type(SV *sv, int how)
mg_get Do magic before a value is retrieved from the SV. See
"sv_magic".
int mg_get(SV* sv)
mg_length
Report on the SV's length. See "sv_magic".
U32 mg_length(SV* sv)
mg_magical
Turns on the magical status of an SV. See "sv_magic".
void mg_magical(SV* sv)
mg_set Do magic after a value is assigned to the SV. See "sv_magic".
int mg_set(SV* sv)
SvGETMAGIC
Invokes "mg_get" on an SV if it has 'get' magic. This macro
evaluates its argument more than once.
void SvGETMAGIC(SV* sv)
SvLOCK Arranges for a mutual exclusion lock to be obtained on sv if a
suitable module has been loaded.
void SvLOCK(SV* sv)
SvSETMAGIC
Invokes "mg_set" on an SV if it has 'set' magic. This macro
evaluates its argument more than once.
void SvSETMAGIC(SV* sv)
SvSetMagicSV
Like "SvSetSV", but does any set magic required afterwards.
void SvSetMagicSV(SV* dsb, SV* ssv)
SvSetMagicSV_nosteal
Like "SvSetSV_nosteal", but does any set magic required
afterwards.
void SvSetMagicSV_nosteal(SV* dsv, SV* ssv)
SvSetSV Calls "sv_setsv" if dsv is not the same as ssv. May evaluate
arguments more than once.
void SvSetSV(SV* dsb, SV* ssv)
SvSetSV_nosteal
Calls a non-destructive version of "sv_setsv" if dsv is not the
same as ssv. May evaluate arguments more than once.
void SvSetSV_nosteal(SV* dsv, SV* ssv)
SvSHARE Arranges for sv to be shared between threads if a suitable
module has been loaded.
void SvSHARE(SV* sv)
SvUNLOCK
Releases a mutual exclusion lock on sv if a suitable module has
been loaded.
void SvUNLOCK(SV* sv)
Memory Management
Copy The XSUB-writer's interface to the C "memcpy" function. The
"src" is the source, "dest" is the destination, "nitems" is the
number of items, and "type" is the type. May fail on
overlapping copies. See also "Move".
void Copy(void* src, void* dest, int nitems, type)
CopyD Like "Copy" but returns dest. Useful for encouraging compilers
to tail-call optimise.
void * CopyD(void* src, void* dest, int nitems, type)
Move The XSUB-writer's interface to the C "memmove" function. The
"src" is the source, "dest" is the destination, "nitems" is the
number of items, and "type" is the type. Can do overlapping
moves. See also "Copy".
void Move(void* src, void* dest, int nitems, type)
MoveD Like "Move" but returns dest. Useful for encouraging compilers
to tail-call optimise.
void * MoveD(void* src, void* dest, int nitems, type)
Newx The XSUB-writer's interface to the C "malloc" function.
In 5.9.3, Newx() and friends replace the older New() API, and
drops the first parameter, x, a debug aid which allowed callers
to identify themselves. This aid has been superseded by a new
build option, PERL_MEM_LOG (see "PERL_MEM_LOG" in
perlhacktips). The older API is still there for use in XS
modules supporting older perls.
void Newx(void* ptr, int nitems, type)
Newxc The XSUB-writer's interface to the C "malloc" function, with
cast. See also "Newx".
void Newxc(void* ptr, int nitems, type, cast)
Newxz The XSUB-writer's interface to the C "malloc" function. The
allocated memory is zeroed with "memzero". See also "Newx".
void Newxz(void* ptr, int nitems, type)
Poison PoisonWith(0xEF) for catching access to freed memory.
void Poison(void* dest, int nitems, type)
PoisonFree
PoisonWith(0xEF) for catching access to freed memory.
void PoisonFree(void* dest, int nitems, type)
PoisonNew
PoisonWith(0xAB) for catching access to allocated but
uninitialized memory.
void PoisonNew(void* dest, int nitems, type)
PoisonWith
Fill up memory with a byte pattern (a byte repeated over and
over again) that hopefully catches attempts to access
uninitialized memory.
void PoisonWith(void* dest, int nitems, type,
U8 byte)
Renew The XSUB-writer's interface to the C "realloc" function.
void Renew(void* ptr, int nitems, type)
Renewc The XSUB-writer's interface to the C "realloc" function, with
cast.
void Renewc(void* ptr, int nitems, type, cast)
Safefree
The XSUB-writer's interface to the C "free" function.
void Safefree(void* ptr)
savepv Perl's version of "strdup()". Returns a pointer to a newly
allocated string which is a duplicate of "pv". The size of the
string is determined by "strlen()". The memory allocated for
the new string can be freed with the "Safefree()" function.
char* savepv(const char* pv)
savepvn Perl's version of what "strndup()" would be if it existed.
Returns a pointer to a newly allocated string which is a
duplicate of the first "len" bytes from "pv", plus a trailing
NUL byte. The memory allocated for the new string can be freed
with the "Safefree()" function.
char* savepvn(const char* pv, I32 len)
savepvs Like "savepvn", but takes a literal string instead of a
string/length pair.
char* savepvs(const char* s)
savesharedpv
A version of "savepv()" which allocates the duplicate string in
memory which is shared between threads.
char* savesharedpv(const char* pv)
savesharedpvn
A version of "savepvn()" which allocates the duplicate string
in memory which is shared between threads. (With the specific
difference that a NULL pointer is not acceptable)
char* savesharedpvn(const char *const pv,
const STRLEN len)
savesharedpvs
A version of "savepvs()" which allocates the duplicate string
in memory which is shared between threads.
char* savesharedpvs(const char* s)
savesharedsvpv
A version of "savesharedpv()" which allocates the duplicate
string in memory which is shared between threads.
char* savesharedsvpv(SV *sv)
savesvpv
A version of "savepv()"/"savepvn()" which gets the string to
duplicate from the passed in SV using "SvPV()"
char* savesvpv(SV* sv)
StructCopy
This is an architecture-independent macro to copy one structure
to another.
void StructCopy(type src, type dest, type)
Zero The XSUB-writer's interface to the C "memzero" function. The
"dest" is the destination, "nitems" is the number of items, and
"type" is the type.
void Zero(void* dest, int nitems, type)
ZeroD Like "Zero" but returns dest. Useful for encouraging compilers
to tail-call optimise.
void * ZeroD(void* dest, int nitems, type)
Miscellaneous Functions
fbm_compile
Analyses the string in order to make fast searches on it using
fbm_instr() -- the Boyer-Moore algorithm.
void fbm_compile(SV* sv, U32 flags)
fbm_instr
Returns the location of the SV in the string delimited by "str"
and "strend". It returns "NULL" if the string can't be found.
The "sv" does not have to be fbm_compiled, but the search will
not be as fast then.
char* fbm_instr(unsigned char* big,
unsigned char* bigend, SV* littlestr,
U32 flags)
foldEQ Returns true if the leading len bytes of the strings s1 and s2
are the same case-insensitively; false otherwise. Uppercase
and lowercase ASCII range bytes match themselves and their
opposite case counterparts. Non-cased and non-ASCII range
bytes match only themselves.
I32 foldEQ(const char* a, const char* b, I32 len)
foldEQ_locale
Returns true if the leading len bytes of the strings s1 and s2
are the same case-insensitively in the current locale; false
otherwise.
I32 foldEQ_locale(const char* a, const char* b,
I32 len)
form Takes a sprintf-style format pattern and conventional (non-SV)
arguments and returns the formatted string.
(char *) Perl_form(pTHX_ const char* pat, ...)
can be used any place a string (char *) is required:
char * s = Perl_form("%d.%d",major,minor);
Uses a single private buffer so if you want to format several
strings you must explicitly copy the earlier strings away (and
free the copies when you are done).
char* form(const char* pat, ...)
getcwd_sv
Fill the sv with current working directory
int getcwd_sv(SV* sv)
mess Take a sprintf-style format pattern and argument list. These
are used to generate a string message. If the message does not
end with a newline, then it will be extended with some
indication of the current location in the code, as described
for "mess_sv".
Normally, the resulting message is returned in a new mortal SV.
During global destruction a single SV may be shared between
uses of this function.
SV * mess(const char *pat, ...)
mess_sv Expands a message, intended for the user, to include an
indication of the current location in the code, if the message
does not already appear to be complete.
"basemsg" is the initial message or object. If it is a
reference, it will be used as-is and will be the result of this
function. Otherwise it is used as a string, and if it already
ends with a newline, it is taken to be complete, and the result
of this function will be the same string. If the message does
not end with a newline, then a segment such as "at foo.pl line
37" will be appended, and possibly other clauses indicating the
current state of execution. The resulting message will end
with a dot and a newline.
Normally, the resulting message is returned in a new mortal SV.
During global destruction a single SV may be shared between
uses of this function. If "consume" is true, then the function
is permitted (but not required) to modify and return "basemsg"
instead of allocating a new SV.
SV * mess_sv(SV *basemsg, bool consume)
my_snprintf
The C library "snprintf" functionality, if available and
standards-compliant (uses "vsnprintf", actually). However, if
the "vsnprintf" is not available, will unfortunately use the
unsafe "vsprintf" which can overrun the buffer (there is an
overrun check, but that may be too late). Consider using
"sv_vcatpvf" instead, or getting "vsnprintf".
int my_snprintf(char *buffer, const Size_t len,
const char *format, ...)
my_sprintf
The C library "sprintf", wrapped if necessary, to ensure that
it will return the length of the string written to the buffer.
Only rare pre-ANSI systems need the wrapper function - usually
this is a direct call to "sprintf".
int my_sprintf(char *buffer, const char *pat, ...)
my_vsnprintf
The C library "vsnprintf" if available and standards-compliant.
However, if if the "vsnprintf" is not available, will
unfortunately use the unsafe "vsprintf" which can overrun the
buffer (there is an overrun check, but that may be too late).
Consider using "sv_vcatpvf" instead, or getting "vsnprintf".
int my_vsnprintf(char *buffer, const Size_t len,
const char *format, va_list ap)
new_version
Returns a new version object based on the passed in SV:
SV *sv = new_version(SV *ver);
Does not alter the passed in ver SV. See "upg_version" if you
want to upgrade the SV.
SV* new_version(SV *ver)
prescan_version
Validate that a given string can be parsed as a version object,
but doesn't actually perform the parsing. Can use either
strict or lax validation rules. Can optionally set a number of
hint variables to save the parsing code some time when
tokenizing.
const char* prescan_version(const char *s, bool strict,
const char** errstr,
bool *sqv,
int *ssaw_decimal,
int *swidth, bool *salpha)
scan_version
Returns a pointer to the next character after the parsed
version string, as well as upgrading the passed in SV to an RV.
Function must be called with an already existing SV like
sv = newSV(0);
s = scan_version(s, SV *sv, bool qv);
Performs some preprocessing to the string to ensure that it has
the correct characteristics of a version. Flags the object if
it contains an underscore (which denotes this is an alpha
version). The boolean qv denotes that the version should be
interpreted as if it had multiple decimals, even if it doesn't.
const char* scan_version(const char *s, SV *rv, bool qv)
strEQ Test two strings to see if they are equal. Returns true or
false.
bool strEQ(char* s1, char* s2)
strGE Test two strings to see if the first, "s1", is greater than or
equal to the second, "s2". Returns true or false.
bool strGE(char* s1, char* s2)
strGT Test two strings to see if the first, "s1", is greater than the
second, "s2". Returns true or false.
bool strGT(char* s1, char* s2)
strLE Test two strings to see if the first, "s1", is less than or
equal to the second, "s2". Returns true or false.
bool strLE(char* s1, char* s2)
strLT Test two strings to see if the first, "s1", is less than the
second, "s2". Returns true or false.
bool strLT(char* s1, char* s2)
strNE Test two strings to see if they are different. Returns true or
false.
bool strNE(char* s1, char* s2)
strnEQ Test two strings to see if they are equal. The "len" parameter
indicates the number of bytes to compare. Returns true or
false. (A wrapper for "strncmp").
bool strnEQ(char* s1, char* s2, STRLEN len)
strnNE Test two strings to see if they are different. The "len"
parameter indicates the number of bytes to compare. Returns
true or false. (A wrapper for "strncmp").
bool strnNE(char* s1, char* s2, STRLEN len)
sv_destroyable
Dummy routine which reports that object can be destroyed when
there is no sharing module present. It ignores its single SV
argument, and returns 'true'. Exists to avoid test for a NULL
function pointer and because it could potentially warn under
some level of strict-ness.
bool sv_destroyable(SV *sv)
sv_nosharing
Dummy routine which "shares" an SV when there is no sharing
module present. Or "locks" it. Or "unlocks" it. In other
words, ignores its single SV argument. Exists to avoid test
for a NULL function pointer and because it could potentially
warn under some level of strict-ness.
void sv_nosharing(SV *sv)
upg_version
In-place upgrade of the supplied SV to a version object.
SV *sv = upg_version(SV *sv, bool qv);
Returns a pointer to the upgraded SV. Set the boolean qv if
you want to force this SV to be interpreted as an "extended"
version.
SV* upg_version(SV *ver, bool qv)
vcmp Version object aware cmp. Both operands must already have been
converted into version objects.
int vcmp(SV *lhv, SV *rhv)
vmess "pat" and "args" are a sprintf-style format pattern and
encapsulated argument list. These are used to generate a
string message. If the message does not end with a newline,
then it will be extended with some indication of the current
location in the code, as described for "mess_sv".
Normally, the resulting message is returned in a new mortal SV.
During global destruction a single SV may be shared between
uses of this function.
SV * vmess(const char *pat, va_list *args)
vnormal Accepts a version object and returns the normalized string
representation. Call like:
sv = vnormal(rv);
NOTE: you can pass either the object directly or the SV
contained within the RV.
The SV returned has a refcount of 1.
SV* vnormal(SV *vs)
vnumify Accepts a version object and returns the normalized floating
point representation. Call like:
sv = vnumify(rv);
NOTE: you can pass either the object directly or the SV
contained within the RV.
The SV returned has a refcount of 1.
SV* vnumify(SV *vs)
vstringify
In order to maintain maximum compatibility with earlier
versions of Perl, this function will return either the floating
point notation or the multiple dotted notation, depending on
whether the original version contained 1 or more dots,
respectively.
The SV returned has a refcount of 1.
SV* vstringify(SV *vs)
vverify Validates that the SV contains valid internal structure for a
version object. It may be passed either the version object
(RV) or the hash itself (HV). If the structure is valid, it
returns the HV. If the structure is invalid, it returns NULL.
SV *hv = vverify(sv);
Note that it only confirms the bare minimum structure (so as
not to get confused by derived classes which may contain
additional hash entries):
SV* vverify(SV *vs)
MRO Functions
mro_get_linear_isa
Returns the mro linearisation for the given stash. By default,
this will be whatever "mro_get_linear_isa_dfs" returns unless
some other MRO is in effect for the stash. The return value is
a read-only AV*.
You are responsible for "SvREFCNT_inc()" on the return value if
you plan to store it anywhere semi-permanently (otherwise it
might be deleted out from under you the next time the cache is
invalidated).
AV* mro_get_linear_isa(HV* stash)
mro_method_changed_in
Invalidates method caching on any child classes of the given
stash, so that they might notice the changes in this one.
Ideally, all instances of "PL_sub_generation++" in perl source
outside of mro.c should be replaced by calls to this.
Perl automatically handles most of the common ways a method
might be redefined. However, there are a few ways you could
change a method in a stash without the cache code noticing, in
which case you need to call this method afterwards:
1) Directly manipulating the stash HV entries from XS code.
2) Assigning a reference to a readonly scalar constant into a
stash entry in order to create a constant subroutine (like
constant.pm does).
This same method is available from pure perl via,
"mro::method_changed_in(classname)".
void mro_method_changed_in(HV* stash)
mro_register
Registers a custom mro plugin. See perlmroapi for details.
void mro_register(const struct mro_alg *mro)
Multicall Functions
dMULTICALL
Declare local variables for a multicall. See "LIGHTWEIGHT
CALLBACKS" in perlcall.
dMULTICALL;
MULTICALL
Make a lightweight callback. See "LIGHTWEIGHT CALLBACKS" in
perlcall.
MULTICALL;
POP_MULTICALL
Closing bracket for a lightweight callback. See "LIGHTWEIGHT
CALLBACKS" in perlcall.
POP_MULTICALL;
PUSH_MULTICALL
Opening bracket for a lightweight callback. See "LIGHTWEIGHT
CALLBACKS" in perlcall.
PUSH_MULTICALL;
Numeric functions
grok_bin
converts a string representing a binary number to numeric form.
On entry start and *len give the string to scan, *flags gives
conversion flags, and result should be NULL or a pointer to an
NV. The scan stops at the end of the string, or the first
invalid character. Unless "PERL_SCAN_SILENT_ILLDIGIT" is set
in *flags, encountering an invalid character will also trigger
a warning. On return *len is set to the length of the scanned
string, and *flags gives output flags.
If the value is <= "UV_MAX" it is returned as a UV, the output
flags are clear, and nothing is written to *result. If the
value is > UV_MAX "grok_bin" returns UV_MAX, sets
"PERL_SCAN_GREATER_THAN_UV_MAX" in the output flags, and writes
the value to *result (or the value is discarded if result is
NULL).
The binary number may optionally be prefixed with "0b" or "b"
unless "PERL_SCAN_DISALLOW_PREFIX" is set in *flags on entry.
If "PERL_SCAN_ALLOW_UNDERSCORES" is set in *flags then the
binary number may use '_' characters to separate digits.
UV grok_bin(const char* start, STRLEN* len_p,
I32* flags, NV *result)
grok_hex
converts a string representing a hex number to numeric form.
On entry start and *len give the string to scan, *flags gives
conversion flags, and result should be NULL or a pointer to an
NV. The scan stops at the end of the string, or the first
invalid character. Unless "PERL_SCAN_SILENT_ILLDIGIT" is set
in *flags, encountering an invalid character will also trigger
a warning. On return *len is set to the length of the scanned
string, and *flags gives output flags.
If the value is <= UV_MAX it is returned as a UV, the output
flags are clear, and nothing is written to *result. If the
value is > UV_MAX "grok_hex" returns UV_MAX, sets
"PERL_SCAN_GREATER_THAN_UV_MAX" in the output flags, and writes
the value to *result (or the value is discarded if result is
NULL).
The hex number may optionally be prefixed with "0x" or "x"
unless "PERL_SCAN_DISALLOW_PREFIX" is set in *flags on entry.
If "PERL_SCAN_ALLOW_UNDERSCORES" is set in *flags then the hex
number may use '_' characters to separate digits.
UV grok_hex(const char* start, STRLEN* len_p,
I32* flags, NV *result)
grok_number
Recognise (or not) a number. The type of the number is
returned (0 if unrecognised), otherwise it is a bit-ORed
combination of IS_NUMBER_IN_UV, IS_NUMBER_GREATER_THAN_UV_MAX,
IS_NUMBER_NOT_INT, IS_NUMBER_NEG, IS_NUMBER_INFINITY,
IS_NUMBER_NAN (defined in perl.h).
If the value of the number can fit an in UV, it is returned in
the *valuep IS_NUMBER_IN_UV will be set to indicate that
*valuep is valid, IS_NUMBER_IN_UV will never be set unless
*valuep is valid, but *valuep may have been assigned to during
processing even though IS_NUMBER_IN_UV is not set on return.
If valuep is NULL, IS_NUMBER_IN_UV will be set for the same
cases as when valuep is non-NULL, but no actual assignment (or
SEGV) will occur.
IS_NUMBER_NOT_INT will be set with IS_NUMBER_IN_UV if trailing
decimals were seen (in which case *valuep gives the true value
truncated to an integer), and IS_NUMBER_NEG if the number is
negative (in which case *valuep holds the absolute value).
IS_NUMBER_IN_UV is not set if e notation was used or the number
is larger than a UV.
int grok_number(const char *pv, STRLEN len,
UV *valuep)
grok_numeric_radix
Scan and skip for a numeric decimal separator (radix).
bool grok_numeric_radix(const char **sp,
const char *send)
grok_oct
converts a string representing an octal number to numeric form.
On entry start and *len give the string to scan, *flags gives
conversion flags, and result should be NULL or a pointer to an
NV. The scan stops at the end of the string, or the first
invalid character. Unless "PERL_SCAN_SILENT_ILLDIGIT" is set
in *flags, encountering an 8 or 9 will also trigger a warning.
On return *len is set to the length of the scanned string, and
*flags gives output flags.
If the value is <= UV_MAX it is returned as a UV, the output
flags are clear, and nothing is written to *result. If the
value is > UV_MAX "grok_oct" returns UV_MAX, sets
"PERL_SCAN_GREATER_THAN_UV_MAX" in the output flags, and writes
the value to *result (or the value is discarded if result is
NULL).
If "PERL_SCAN_ALLOW_UNDERSCORES" is set in *flags then the
octal number may use '_' characters to separate digits.
UV grok_oct(const char* start, STRLEN* len_p,
I32* flags, NV *result)
Perl_signbit
Return a non-zero integer if the sign bit on an NV is set, and
0 if it is not.
If Configure detects this system has a signbit() that will work
with our NVs, then we just use it via the #define in perl.h.
Otherwise, fall back on this implementation. As a first pass,
this gets everything right except -0.0. Alas, catching -0.0 is
the main use for this function, so this is not too helpful yet.
Still, at least we have the scaffolding in place to support
other systems, should that prove useful.
Configure notes: This function is called 'Perl_signbit'
instead of a plain 'signbit' because it is easy to imagine a
system having a signbit() function or macro that doesn't happen
to work with our particular choice of NVs. We shouldn't just
re-#define signbit as Perl_signbit and expect the standard
system headers to be happy. Also, this is a no-context
function (no pTHX_) because Perl_signbit() is usually
re-#defined in perl.h as a simple macro call to the system's
signbit(). Users should just always call Perl_signbit().
NOTE: this function is experimental and may change or be
removed without notice.
int Perl_signbit(NV f)
scan_bin
For backwards compatibility. Use "grok_bin" instead.
NV scan_bin(const char* start, STRLEN len,
STRLEN* retlen)
scan_hex
For backwards compatibility. Use "grok_hex" instead.
NV scan_hex(const char* start, STRLEN len,
STRLEN* retlen)
scan_oct
For backwards compatibility. Use "grok_oct" instead.
NV scan_oct(const char* start, STRLEN len,
STRLEN* retlen)
Optree construction
newASSIGNOP
Constructs, checks, and returns an assignment op. left and
right supply the parameters of the assignment; they are
consumed by this function and become part of the constructed op
tree.
If optype is "OP_ANDASSIGN", "OP_ORASSIGN", or "OP_DORASSIGN",
then a suitable conditional optree is constructed. If optype
is the opcode of a binary operator, such as "OP_BIT_OR", then
an op is constructed that performs the binary operation and
assigns the result to the left argument. Either way, if optype
is non-zero then flags has no effect.
If optype is zero, then a plain scalar or list assignment is
constructed. Which type of assignment it is is automatically
determined. flags gives the eight bits of "op_flags", except
that "OPf_KIDS" will be set automatically, and, shifted up
eight bits, the eight bits of "op_private", except that the bit
with value 1 or 2 is automatically set as required.
OP * newASSIGNOP(I32 flags, OP *left, I32 optype,
OP *right)
newBINOP
Constructs, checks, and returns an op of any binary type. type
is the opcode. flags gives the eight bits of "op_flags",
except that "OPf_KIDS" will be set automatically, and, shifted
up eight bits, the eight bits of "op_private", except that the
bit with value 1 or 2 is automatically set as required. first
and last supply up to two ops to be the direct children of the
binary op; they are consumed by this function and become part
of the constructed op tree.
OP * newBINOP(I32 type, I32 flags, OP *first,
OP *last)
newCONDOP
Constructs, checks, and returns a conditional-expression
("cond_expr") op. flags gives the eight bits of "op_flags",
except that "OPf_KIDS" will be set automatically, and, shifted
up eight bits, the eight bits of "op_private", except that the
bit with value 1 is automatically set. first supplies the
expression selecting between the two branches, and trueop and
falseop supply the branches; they are consumed by this function
and become part of the constructed op tree.
OP * newCONDOP(I32 flags, OP *first, OP *trueop,
OP *falseop)
newFOROP
Constructs, checks, and returns an op tree expressing a
"foreach" loop (iteration through a list of values). This is a
heavyweight loop, with structure that allows exiting the loop
by "last" and suchlike.
sv optionally supplies the variable that will be aliased to
each item in turn; if null, it defaults to $_ (either lexical
or global). expr supplies the list of values to iterate over.
block supplies the main body of the loop, and cont optionally
supplies a "continue" block that operates as a second half of
the body. All of these optree inputs are consumed by this
function and become part of the constructed op tree.
flags gives the eight bits of "op_flags" for the "leaveloop" op
and, shifted up eight bits, the eight bits of "op_private" for
the "leaveloop" op, except that (in both cases) some bits will
be set automatically.
OP * newFOROP(I32 flags, OP *sv, OP *expr, OP *block,
OP *cont)
newGIVENOP
Constructs, checks, and returns an op tree expressing a "given"
block. cond supplies the expression that will be locally
assigned to a lexical variable, and block supplies the body of
the "given" construct; they are consumed by this function and
become part of the constructed op tree. defsv_off is the pad
offset of the scalar lexical variable that will be affected.
OP * newGIVENOP(OP *cond, OP *block,
PADOFFSET defsv_off)
newGVOP Constructs, checks, and returns an op of any type that involves
an embedded reference to a GV. type is the opcode. flags
gives the eight bits of "op_flags". gv identifies the GV that
the op should reference; calling this function does not
transfer ownership of any reference to it.
OP * newGVOP(I32 type, I32 flags, GV *gv)
newLISTOP
Constructs, checks, and returns an op of any list type. type
is the opcode. flags gives the eight bits of "op_flags",
except that "OPf_KIDS" will be set automatically if required.
first and last supply up to two ops to be direct children of
the list op; they are consumed by this function and become part
of the constructed op tree.
OP * newLISTOP(I32 type, I32 flags, OP *first,
OP *last)
newLOGOP
Constructs, checks, and returns a logical (flow control) op.
type is the opcode. flags gives the eight bits of "op_flags",
except that "OPf_KIDS" will be set automatically, and, shifted
up eight bits, the eight bits of "op_private", except that the
bit with value 1 is automatically set. first supplies the
expression controlling the flow, and other supplies the side
(alternate) chain of ops; they are consumed by this function
and become part of the constructed op tree.
OP * newLOGOP(I32 type, I32 flags, OP *first,
OP *other)
newLOOPEX
Constructs, checks, and returns a loop-exiting op (such as
"goto" or "last"). type is the opcode. label supplies the
parameter determining the target of the op; it is consumed by
this function and become part of the constructed op tree.
OP * newLOOPEX(I32 type, OP *label)
newLOOPOP
Constructs, checks, and returns an op tree expressing a loop.
This is only a loop in the control flow through the op tree; it
does not have the heavyweight loop structure that allows
exiting the loop by "last" and suchlike. flags gives the eight
bits of "op_flags" for the top-level op, except that some bits
will be set automatically as required. expr supplies the
expression controlling loop iteration, and block supplies the
body of the loop; they are consumed by this function and become
part of the constructed op tree. debuggable is currently
unused and should always be 1.
OP * newLOOPOP(I32 flags, I32 debuggable, OP *expr,
OP *block)
newNULLLIST
Constructs, checks, and returns a new "stub" op, which
represents an empty list expression.
OP * newNULLLIST()
newOP Constructs, checks, and returns an op of any base type (any
type that has no extra fields). type is the opcode. flags
gives the eight bits of "op_flags", and, shifted up eight bits,
the eight bits of "op_private".
OP * newOP(I32 type, I32 flags)
newPADOP
Constructs, checks, and returns an op of any type that involves
a reference to a pad element. type is the opcode. flags gives
the eight bits of "op_flags". A pad slot is automatically
allocated, and is populated with sv; this function takes
ownership of one reference to it.
This function only exists if Perl has been compiled to use
ithreads.
OP * newPADOP(I32 type, I32 flags, SV *sv)
newPMOP Constructs, checks, and returns an op of any pattern matching
type. type is the opcode. flags gives the eight bits of
"op_flags" and, shifted up eight bits, the eight bits of
"op_private".
OP * newPMOP(I32 type, I32 flags)
newPVOP Constructs, checks, and returns an op of any type that involves
an embedded C-level pointer (PV). type is the opcode. flags
gives the eight bits of "op_flags". pv supplies the C-level
pointer, which must have been allocated using
"PerlMemShared_malloc"; the memory will be freed when the op is
destroyed.
OP * newPVOP(I32 type, I32 flags, char *pv)
newRANGE
Constructs and returns a "range" op, with subordinate "flip"
and "flop" ops. flags gives the eight bits of "op_flags" for
the "flip" op and, shifted up eight bits, the eight bits of
"op_private" for both the "flip" and "range" ops, except that
the bit with value 1 is automatically set. left and right
supply the expressions controlling the endpoints of the range;
they are consumed by this function and become part of the
constructed op tree.
OP * newRANGE(I32 flags, OP *left, OP *right)
newSLICEOP
Constructs, checks, and returns an "lslice" (list slice) op.
flags gives the eight bits of "op_flags", except that
"OPf_KIDS" will be set automatically, and, shifted up eight
bits, the eight bits of "op_private", except that the bit with
value 1 or 2 is automatically set as required. listval and
subscript supply the parameters of the slice; they are consumed
by this function and become part of the constructed op tree.
OP * newSLICEOP(I32 flags, OP *subscript,
OP *listval)
newSTATEOP
Constructs a state op (COP). The state op is normally a
"nextstate" op, but will be a "dbstate" op if debugging is
enabled for currently-compiled code. The state op is populated
from "PL_curcop" (or "PL_compiling"). If label is non-null, it
supplies the name of a label to attach to the state op; this
function takes ownership of the memory pointed at by label, and
will free it. flags gives the eight bits of "op_flags" for the
state op.
If o is null, the state op is returned. Otherwise the state op
is combined with o into a "lineseq" list op, which is returned.
o is consumed by this function and becomes part of the returned
op tree.
OP * newSTATEOP(I32 flags, char *label, OP *o)
newSVOP Constructs, checks, and returns an op of any type that involves
an embedded SV. type is the opcode. flags gives the eight
bits of "op_flags". sv gives the SV to embed in the op; this
function takes ownership of one reference to it.
OP * newSVOP(I32 type, I32 flags, SV *sv)
newUNOP Constructs, checks, and returns an op of any unary type. type
is the opcode. flags gives the eight bits of "op_flags",
except that "OPf_KIDS" will be set automatically if required,
and, shifted up eight bits, the eight bits of "op_private",
except that the bit with value 1 is automatically set. first
supplies an optional op to be the direct child of the unary op;
it is consumed by this function and become part of the
constructed op tree.
OP * newUNOP(I32 type, I32 flags, OP *first)
newWHENOP
Constructs, checks, and returns an op tree expressing a "when"
block. cond supplies the test expression, and block supplies
the block that will be executed if the test evaluates to true;
they are consumed by this function and become part of the
constructed op tree. cond will be interpreted DWIMically,
often as a comparison against $_, and may be null to generate a
"default" block.
OP * newWHENOP(OP *cond, OP *block)
newWHILEOP
Constructs, checks, and returns an op tree expressing a "while"
loop. This is a heavyweight loop, with structure that allows
exiting the loop by "last" and suchlike.
loop is an optional preconstructed "enterloop" op to use in the
loop; if it is null then a suitable op will be constructed
automatically. expr supplies the loop's controlling
expression. block supplies the main body of the loop, and cont
optionally supplies a "continue" block that operates as a
second half of the body. All of these optree inputs are
consumed by this function and become part of the constructed op
tree.
flags gives the eight bits of "op_flags" for the "leaveloop" op
and, shifted up eight bits, the eight bits of "op_private" for
the "leaveloop" op, except that (in both cases) some bits will
be set automatically. debuggable is currently unused and
should always be 1. has_my can be supplied as true to force
the loop body to be enclosed in its own scope.
OP * newWHILEOP(I32 flags, I32 debuggable,
LOOP *loop, OP *expr, OP *block,
OP *cont, I32 has_my)
Optree Manipulation Functions
ck_entersub_args_list
Performs the default fixup of the arguments part of an
"entersub" op tree. This consists of applying list context to
each of the argument ops. This is the standard treatment used
on a call marked with "&", or a method call, or a call through
a subroutine reference, or any other call where the callee
can't be identified at compile time, or a call where the callee
has no prototype.
OP * ck_entersub_args_list(OP *entersubop)
ck_entersub_args_proto
Performs the fixup of the arguments part of an "entersub" op
tree based on a subroutine prototype. This makes various
modifications to the argument ops, from applying context up to
inserting "refgen" ops, and checking the number and syntactic
types of arguments, as directed by the prototype. This is the
standard treatment used on a subroutine call, not marked with
"&", where the callee can be identified at compile time and has
a prototype.
protosv supplies the subroutine prototype to be applied to the
call. It may be a normal defined scalar, of which the string
value will be used. Alternatively, for convenience, it may be
a subroutine object (a "CV*" that has been cast to "SV*") which
has a prototype. The prototype supplied, in whichever form,
does not need to match the actual callee referenced by the op
tree.
If the argument ops disagree with the prototype, for example by
having an unacceptable number of arguments, a valid op tree is
returned anyway. The error is reflected in the parser state,
normally resulting in a single exception at the top level of
parsing which covers all the compilation errors that occurred.
In the error message, the callee is referred to by the name
defined by the namegv parameter.
OP * ck_entersub_args_proto(OP *entersubop,
GV *namegv, SV *protosv)
ck_entersub_args_proto_or_list
Performs the fixup of the arguments part of an "entersub" op
tree either based on a subroutine prototype or using default
list-context processing. This is the standard treatment used
on a subroutine call, not marked with "&", where the callee can
be identified at compile time.
protosv supplies the subroutine prototype to be applied to the
call, or indicates that there is no prototype. It may be a
normal scalar, in which case if it is defined then the string
value will be used as a prototype, and if it is undefined then
there is no prototype. Alternatively, for convenience, it may
be a subroutine object (a "CV*" that has been cast to "SV*"),
of which the prototype will be used if it has one. The
prototype (or lack thereof) supplied, in whichever form, does
not need to match the actual callee referenced by the op tree.
If the argument ops disagree with the prototype, for example by
having an unacceptable number of arguments, a valid op tree is
returned anyway. The error is reflected in the parser state,
normally resulting in a single exception at the top level of
parsing which covers all the compilation errors that occurred.
In the error message, the callee is referred to by the name
defined by the namegv parameter.
OP * ck_entersub_args_proto_or_list(OP *entersubop,
GV *namegv,
SV *protosv)
cv_const_sv
If "cv" is a constant sub eligible for inlining. returns the
constant value returned by the sub. Otherwise, returns NULL.
Constant subs can be created with "newCONSTSUB" or as described
in "Constant Functions" in perlsub.
SV* cv_const_sv(const CV *const cv)
cv_get_call_checker
Retrieves the function that will be used to fix up a call to
cv. Specifically, the function is applied to an "entersub" op
tree for a subroutine call, not marked with "&", where the
callee can be identified at compile time as cv.
The C-level function pointer is returned in *ckfun_p, and an SV
argument for it is returned in *ckobj_p. The function is
intended to be called in this manner:
entersubop = (*ckfun_p)(aTHX_ entersubop, namegv, (*ckobj_p));
In this call, entersubop is a pointer to the "entersub" op,
which may be replaced by the check function, and namegv is a GV
supplying the name that should be used by the check function to
refer to the callee of the "entersub" op if it needs to emit
any diagnostics. It is permitted to apply the check function
in non-standard situations, such as to a call to a different
subroutine or to a method call.
By default, the function is
Perl_ck_entersub_args_proto_or_list, and the SV parameter is cv
itself. This implements standard prototype processing. It can
be changed, for a particular subroutine, by
"cv_set_call_checker".
void cv_get_call_checker(CV *cv,
Perl_call_checker *ckfun_p,
SV **ckobj_p)
cv_set_call_checker
Sets the function that will be used to fix up a call to cv.
Specifically, the function is applied to an "entersub" op tree
for a subroutine call, not marked with "&", where the callee
can be identified at compile time as cv.
The C-level function pointer is supplied in ckfun, and an SV
argument for it is supplied in ckobj. The function is intended
to be called in this manner:
entersubop = ckfun(aTHX_ entersubop, namegv, ckobj);
In this call, entersubop is a pointer to the "entersub" op,
which may be replaced by the check function, and namegv is a GV
supplying the name that should be used by the check function to
refer to the callee of the "entersub" op if it needs to emit
any diagnostics. It is permitted to apply the check function
in non-standard situations, such as to a call to a different
subroutine or to a method call.
The current setting for a particular CV can be retrieved by
"cv_get_call_checker".
void cv_set_call_checker(CV *cv,
Perl_call_checker ckfun,
SV *ckobj)
LINKLIST
Given the root of an optree, link the tree in execution order
using the "op_next" pointers and return the first op executed.
If this has already been done, it will not be redone, and
"o->op_next" will be returned. If "o->op_next" is not already
set, o should be at least an "UNOP".
OP* LINKLIST(OP *o)
newCONSTSUB
See "newCONSTSUB_flags".
CV* newCONSTSUB(HV* stash, const char* name, SV* sv)
newCONSTSUB_flags
Creates a constant sub equivalent to Perl "sub FOO () { 123 }"
which is eligible for inlining at compile-time.
Currently, the only useful value for "flags" is SVf_UTF8.
Passing NULL for SV creates a constant sub equivalent to "sub
BAR () {}", which won't be called if used as a destructor, but
will suppress the overhead of a call to "AUTOLOAD". (This
form, however, isn't eligible for inlining at compile time.)
CV* newCONSTSUB_flags(HV* stash, const char* name,
STRLEN len, U32 flags, SV* sv)
newXS Used by "xsubpp" to hook up XSUBs as Perl subs. filename needs
to be static storage, as it is used directly as CvFILE(),
without a copy being made.
op_append_elem
Append an item to the list of ops contained directly within a
list-type op, returning the lengthened list. first is the
list-type op, and last is the op to append to the list. optype
specifies the intended opcode for the list. If first is not
already a list of the right type, it will be upgraded into one.
If either first or last is null, the other is returned
unchanged.
OP * op_append_elem(I32 optype, OP *first, OP *last)
op_append_list
Concatenate the lists of ops contained directly within two
list-type ops, returning the combined list. first and last are
the list-type ops to concatenate. optype specifies the
intended opcode for the list. If either first or last is not
already a list of the right type, it will be upgraded into one.
If either first or last is null, the other is returned
unchanged.
OP * op_append_list(I32 optype, OP *first, OP *last)
OP_CLASS
Return the class of the provided OP: that is, which of the *OP
structures it uses. For core ops this currently gets the
information out of PL_opargs, which does not always accurately
reflect the type used. For custom ops the type is returned
from the registration, and it is up to the registree to ensure
it is accurate. The value returned will be one of the OA_*
constants from op.h.
U32 OP_CLASS(OP *o)
OP_DESC Return a short description of the provided OP.
const char * OP_DESC(OP *o)
op_linklist
This function is the implementation of the "LINKLIST" macro. It
should not be called directly.
OP* op_linklist(OP *o)
op_lvalue
Propagate lvalue ("modifiable") context to an op and its
children. type represents the context type, roughly based on
the type of op that would do the modifying, although "local()"
is represented by OP_NULL, because it has no op type of its own
(it is signalled by a flag on the lvalue op).
This function detects things that can't be modified, such as
"$x+1", and generates errors for them. For example, "$x+1 = 2"
would cause it to be called with an op of type OP_ADD and a
"type" argument of OP_SASSIGN.
It also flags things that need to behave specially in an lvalue
context, such as "$$x = 5" which might have to vivify a
reference in $x.
NOTE: this function is experimental and may change or be
removed without notice.
OP * op_lvalue(OP *o, I32 type)
OP_NAME Return the name of the provided OP. For core ops this looks up
the name from the op_type; for custom ops from the op_ppaddr.
const char * OP_NAME(OP *o)
op_prepend_elem
Prepend an item to the list of ops contained directly within a
list-type op, returning the lengthened list. first is the op
to prepend to the list, and last is the list-type op. optype
specifies the intended opcode for the list. If last is not
already a list of the right type, it will be upgraded into one.
If either first or last is null, the other is returned
unchanged.
OP * op_prepend_elem(I32 optype, OP *first, OP *last)
op_scope
Wraps up an op tree with some additional ops so that at runtime
a dynamic scope will be created. The original ops run in the
new dynamic scope, and then, provided that they exit normally,
the scope will be unwound. The additional ops used to create
and unwind the dynamic scope will normally be an
"enter"/"leave" pair, but a "scope" op may be used instead if
the ops are simple enough to not need the full dynamic scope
structure.
NOTE: this function is experimental and may change or be
removed without notice.
OP * op_scope(OP *o)
rv2cv_op_cv
Examines an op, which is expected to identify a subroutine at
runtime, and attempts to determine at compile time which
subroutine it identifies. This is normally used during Perl
compilation to determine whether a prototype can be applied to
a function call. cvop is the op being considered, normally an
"rv2cv" op. A pointer to the identified subroutine is
returned, if it could be determined statically, and a null
pointer is returned if it was not possible to determine
statically.
Currently, the subroutine can be identified statically if the
RV that the "rv2cv" is to operate on is provided by a suitable
"gv" or "const" op. A "gv" op is suitable if the GV's CV slot
is populated. A "const" op is suitable if the constant value
must be an RV pointing to a CV. Details of this process may
change in future versions of Perl. If the "rv2cv" op has the
"OPpENTERSUB_AMPER" flag set then no attempt is made to
identify the subroutine statically: this flag is used to
suppress compile-time magic on a subroutine call, forcing it to
use default runtime behaviour.
If flags has the bit "RV2CVOPCV_MARK_EARLY" set, then the
handling of a GV reference is modified. If a GV was examined
and its CV slot was found to be empty, then the "gv" op has the
"OPpEARLY_CV" flag set. If the op is not optimised away, and
the CV slot is later populated with a subroutine having a
prototype, that flag eventually triggers the warning "called
too early to check prototype".
If flags has the bit "RV2CVOPCV_RETURN_NAME_GV" set, then
instead of returning a pointer to the subroutine it returns a
pointer to the GV giving the most appropriate name for the
subroutine in this context. Normally this is just the "CvGV"
of the subroutine, but for an anonymous ("CvANON") subroutine
that is referenced through a GV it will be the referencing GV.
The resulting "GV*" is cast to "CV*" to be returned. A null
pointer is returned as usual if there is no statically-
determinable subroutine.
CV * rv2cv_op_cv(OP *cvop, U32 flags)
Pad Data Structures
CvPADLIST
CV's can have CvPADLIST(cv) set to point to an AV. This is the
CV's scratchpad, which stores lexical variables and opcode
temporary and per-thread values.
For these purposes "forms" are a kind-of CV, eval""s are too
(except they're not callable at will and are always thrown away
after the eval"" is done executing). Require'd files are simply
evals without any outer lexical scope.
XSUBs don't have CvPADLIST set - dXSTARG fetches values from
PL_curpad, but that is really the callers pad (a slot of which
is allocated by every entersub).
The CvPADLIST AV has the REFCNT of its component items managed
"manually" (mostly in pad.c) rather than by normal av.c rules.
So we turn off AvREAL just before freeing it, to let av.c know
not to touch the entries. The items in the AV are not SVs as
for a normal AV, but other AVs:
0'th Entry of the CvPADLIST is an AV which represents the
"names" or rather the "static type information" for lexicals.
The CvDEPTH'th entry of CvPADLIST AV is an AV which is the
stack frame at that depth of recursion into the CV. The 0'th
slot of a frame AV is an AV which is @_. other entries are
storage for variables and op targets.
Iterating over the names AV iterates over all possible pad
items. Pad slots that are SVs_PADTMP (targets/GVs/constants)
end up having &PL_sv_undef "names" (see pad_alloc()).
Only my/our variable (SVs_PADMY/SVs_PADOUR) slots get valid
names. The rest are op targets/GVs/constants which are
statically allocated or resolved at compile time. These don't
have names by which they can be looked up from Perl code at run
time through eval"" like my/our variables can be. Since they
can't be looked up by "name" but only by their index allocated
at compile time (which is usually in PL_op->op_targ), wasting a
name SV for them doesn't make sense.
The SVs in the names AV have their PV being the name of the
variable. xlow+1..xhigh inclusive in the NV union is a range
of cop_seq numbers for which the name is valid (accessed
through the macros COP_SEQ_RANGE_LOW and _HIGH). During
compilation, these fields may hold the special value
PERL_PADSEQ_INTRO to indicate various stages:
COP_SEQ_RANGE_LOW _HIGH
----------------- -----
PERL_PADSEQ_INTRO 0 variable not yet introduced: { my ($x
valid-seq# PERL_PADSEQ_INTRO variable in scope: { my ($x)
valid-seq# valid-seq# compilation of scope complete: { my ($x) }
For typed lexicals name SV is SVt_PVMG and SvSTASH points at
the type. For "our" lexicals, the type is also SVt_PVMG, with
the SvOURSTASH slot pointing at the stash of the associated
global (so that duplicate "our" declarations in the same
package can be detected). SvUVX is sometimes hijacked to store
the generation number during compilation.
If SvFAKE is set on the name SV, then that slot in the frame AV
is a REFCNT'ed reference to a lexical from "outside". In this
case, the name SV does not use xlow and xhigh to store a
cop_seq range, since it is in scope throughout. Instead xhigh
stores some flags containing info about the real lexical (is it
declared in an anon, and is it capable of being instantiated
multiple times?), and for fake ANONs, xlow contains the index
within the parent's pad where the lexical's value is stored, to
make cloning quicker.
If the 'name' is '&' the corresponding entry in frame AV is a
CV representing a possible closure. (SvFAKE and name of '&' is
not a meaningful combination currently but could become so if
"my sub foo {}" is implemented.)
Note that formats are treated as anon subs, and are cloned each
time write is called (if necessary).
The flag SVs_PADSTALE is cleared on lexicals each time the my()
is executed, and set on scope exit. This allows the 'Variable
$x is not available' warning to be generated in evals, such as
{ my $x = 1; sub f { eval '$x'} } f();
For state vars, SVs_PADSTALE is overloaded to mean 'not yet
initialised'
NOTE: this function is experimental and may change or be
removed without notice.
PADLIST * CvPADLIST(CV *cv)
pad_add_name_pvs
Exactly like "pad_add_name_pvn", but takes a literal string
instead of a string/length pair.
PADOFFSET pad_add_name_pvs(const char *name, U32 flags,
HV *typestash, HV *ourstash)
pad_findmy_pvs
Exactly like "pad_findmy_pvn", but takes a literal string
instead of a string/length pair.
PADOFFSET pad_findmy_pvs(const char *name, U32 flags)
pad_new Create a new padlist, updating the global variables for the
currently-compiling padlist to point to the new padlist. The
following flags can be OR'ed together:
padnew_CLONE this pad is for a cloned CV
padnew_SAVE save old globals on the save stack
padnew_SAVESUB also save extra stuff for start of sub
PADLIST * pad_new(int flags)
PL_comppad
During compilation, this points to the array containing the
values part of the pad for the currently-compiling code. (At
runtime a CV may have many such value arrays; at compile time
just one is constructed.) At runtime, this points to the array
containing the currently-relevant values for the pad for the
currently-executing code.
NOTE: this function is experimental and may change or be
removed without notice.
PL_comppad_name
During compilation, this points to the array containing the
names part of the pad for the currently-compiling code.
NOTE: this function is experimental and may change or be
removed without notice.
PL_curpad
Points directly to the body of the "PL_comppad" array. (I.e.,
this is "AvARRAY(PL_comppad)".)
NOTE: this function is experimental and may change or be
removed without notice.
Per-Interpreter Variables
PL_modglobal
"PL_modglobal" is a general purpose, interpreter global HV for
use by extensions that need to keep information on a per-
interpreter basis. In a pinch, it can also be used as a symbol
table for extensions to share data among each other. It is a
good idea to use keys prefixed by the package name of the
extension that owns the data.
HV* PL_modglobal
PL_na A convenience variable which is typically used with "SvPV" when
one doesn't care about the length of the string. It is usually
more efficient to either declare a local variable and use that
instead or to use the "SvPV_nolen" macro.
STRLEN PL_na
PL_opfreehook
When non-"NULL", the function pointed by this variable will be
called each time an OP is freed with the corresponding OP as
the argument. This allows extensions to free any extra
attribute they have locally attached to an OP. It is also
assured to first fire for the parent OP and then for its kids.
When you replace this variable, it is considered a good
practice to store the possibly previously installed hook and
that you recall it inside your own.
Perl_ophook_t PL_opfreehook
PL_peepp
Pointer to the per-subroutine peephole optimiser. This is a
function that gets called at the end of compilation of a Perl
subroutine (or equivalently independent piece of Perl code) to
perform fixups of some ops and to perform small-scale
optimisations. The function is called once for each subroutine
that is compiled, and is passed, as sole parameter, a pointer
to the op that is the entry point to the subroutine. It
modifies the op tree in place.
The peephole optimiser should never be completely replaced.
Rather, add code to it by wrapping the existing optimiser. The
basic way to do this can be seen in "Compile pass 3: peephole
optimization" in perlguts. If the new code wishes to operate
on ops throughout the subroutine's structure, rather than just
at the top level, it is likely to be more convenient to wrap
the "PL_rpeepp" hook.
peep_t PL_peepp
PL_rpeepp
Pointer to the recursive peephole optimiser. This is a
function that gets called at the end of compilation of a Perl
subroutine (or equivalently independent piece of Perl code) to
perform fixups of some ops and to perform small-scale
optimisations. The function is called once for each chain of
ops linked through their "op_next" fields; it is recursively
called to handle each side chain. It is passed, as sole
parameter, a pointer to the op that is at the head of the
chain. It modifies the op tree in place.
The peephole optimiser should never be completely replaced.
Rather, add code to it by wrapping the existing optimiser. The
basic way to do this can be seen in "Compile pass 3: peephole
optimization" in perlguts. If the new code wishes to operate
only on ops at a subroutine's top level, rather than throughout
the structure, it is likely to be more convenient to wrap the
"PL_peepp" hook.
peep_t PL_rpeepp
PL_sv_no
This is the "false" SV. See "PL_sv_yes". Always refer to this
as &PL_sv_no.
SV PL_sv_no
PL_sv_undef
This is the "undef" SV. Always refer to this as &PL_sv_undef.
SV PL_sv_undef
PL_sv_yes
This is the "true" SV. See "PL_sv_no". Always refer to this
as &PL_sv_yes.
SV PL_sv_yes
REGEXP Functions
SvRX Convenience macro to get the REGEXP from a SV. This is
approximately equivalent to the following snippet:
if (SvMAGICAL(sv))
mg_get(sv);
if (SvROK(sv))
sv = MUTABLE_SV(SvRV(sv));
if (SvTYPE(sv) == SVt_REGEXP)
return (REGEXP*) sv;
NULL will be returned if a REGEXP* is not found.
REGEXP * SvRX(SV *sv)
SvRXOK Returns a boolean indicating whether the SV (or the one it
references) is a REGEXP.
If you want to do something with the REGEXP* later use SvRX
instead and check for NULL.
bool SvRXOK(SV* sv)
Simple Exception Handling Macros
dXCPT Set up necessary local variables for exception handling. See
"Exception Handling" in perlguts.
dXCPT;
XCPT_CATCH
Introduces a catch block. See "Exception Handling" in
perlguts.
XCPT_RETHROW
Rethrows a previously caught exception. See "Exception
Handling" in perlguts.
XCPT_RETHROW;
XCPT_TRY_END
Ends a try block. See "Exception Handling" in perlguts.
XCPT_TRY_START
Starts a try block. See "Exception Handling" in perlguts.
Stack Manipulation Macros
dMARK Declare a stack marker variable, "mark", for the XSUB. See
"MARK" and "dORIGMARK".
dMARK;
dORIGMARK
Saves the original stack mark for the XSUB. See "ORIGMARK".
dORIGMARK;
dSP Declares a local copy of perl's stack pointer for the XSUB,
available via the "SP" macro. See "SP".
dSP;
EXTEND Used to extend the argument stack for an XSUB's return values.
Once used, guarantees that there is room for at least "nitems"
to be pushed onto the stack.
void EXTEND(SP, int nitems)
MARK Stack marker variable for the XSUB. See "dMARK".
mPUSHi Push an integer onto the stack. The stack must have room for
this element. Does not use "TARG". See also "PUSHi",
"mXPUSHi" and "XPUSHi".
void mPUSHi(IV iv)
mPUSHn Push a double onto the stack. The stack must have room for
this element. Does not use "TARG". See also "PUSHn",
"mXPUSHn" and "XPUSHn".
void mPUSHn(NV nv)
mPUSHp Push a string onto the stack. The stack must have room for
this element. The "len" indicates the length of the string.
Does not use "TARG". See also "PUSHp", "mXPUSHp" and "XPUSHp".
void mPUSHp(char* str, STRLEN len)
mPUSHs Push an SV onto the stack and mortalizes the SV. The stack
must have room for this element. Does not use "TARG". See
also "PUSHs" and "mXPUSHs".
void mPUSHs(SV* sv)
mPUSHu Push an unsigned integer onto the stack. The stack must have
room for this element. Does not use "TARG". See also "PUSHu",
"mXPUSHu" and "XPUSHu".
void mPUSHu(UV uv)
mXPUSHi Push an integer onto the stack, extending the stack if
necessary. Does not use "TARG". See also "XPUSHi", "mPUSHi"
and "PUSHi".
void mXPUSHi(IV iv)
mXPUSHn Push a double onto the stack, extending the stack if necessary.
Does not use "TARG". See also "XPUSHn", "mPUSHn" and "PUSHn".
void mXPUSHn(NV nv)
mXPUSHp Push a string onto the stack, extending the stack if necessary.
The "len" indicates the length of the string. Does not use
"TARG". See also "XPUSHp", "mPUSHp" and "PUSHp".
void mXPUSHp(char* str, STRLEN len)
mXPUSHs Push an SV onto the stack, extending the stack if necessary and
mortalizes the SV. Does not use "TARG". See also "XPUSHs" and
"mPUSHs".
void mXPUSHs(SV* sv)
mXPUSHu Push an unsigned integer onto the stack, extending the stack if
necessary. Does not use "TARG". See also "XPUSHu", "mPUSHu"
and "PUSHu".
void mXPUSHu(UV uv)
ORIGMARK
The original stack mark for the XSUB. See "dORIGMARK".
POPi Pops an integer off the stack.
IV POPi
POPl Pops a long off the stack.
long POPl
POPn Pops a double off the stack.
NV POPn
POPp Pops a string off the stack. Deprecated. New code should use
POPpx.
char* POPp
POPpbytex
Pops a string off the stack which must consist of bytes i.e.
characters < 256.
char* POPpbytex
POPpx Pops a string off the stack.
char* POPpx
POPs Pops an SV off the stack.
SV* POPs
PUSHi Push an integer onto the stack. The stack must have room for
this element. Handles 'set' magic. Uses "TARG", so "dTARGET"
or "dXSTARG" should be called to declare it. Do not call
multiple "TARG"-oriented macros to return lists from XSUB's -
see "mPUSHi" instead. See also "XPUSHi" and "mXPUSHi".
void PUSHi(IV iv)
PUSHMARK
Opening bracket for arguments on a callback. See "PUTBACK" and
perlcall.
void PUSHMARK(SP)
PUSHmortal
Push a new mortal SV onto the stack. The stack must have room
for this element. Does not use "TARG". See also "PUSHs",
"XPUSHmortal" and "XPUSHs".
void PUSHmortal()
PUSHn Push a double onto the stack. The stack must have room for
this element. Handles 'set' magic. Uses "TARG", so "dTARGET"
or "dXSTARG" should be called to declare it. Do not call
multiple "TARG"-oriented macros to return lists from XSUB's -
see "mPUSHn" instead. See also "XPUSHn" and "mXPUSHn".
void PUSHn(NV nv)
PUSHp Push a string onto the stack. The stack must have room for
this element. The "len" indicates the length of the string.
Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG"
should be called to declare it. Do not call multiple
"TARG"-oriented macros to return lists from XSUB's - see
"mPUSHp" instead. See also "XPUSHp" and "mXPUSHp".
void PUSHp(char* str, STRLEN len)
PUSHs Push an SV onto the stack. The stack must have room for this
element. Does not handle 'set' magic. Does not use "TARG".
See also "PUSHmortal", "XPUSHs" and "XPUSHmortal".
void PUSHs(SV* sv)
PUSHu Push an unsigned integer onto the stack. The stack must have
room for this element. Handles 'set' magic. Uses "TARG", so
"dTARGET" or "dXSTARG" should be called to declare it. Do not
call multiple "TARG"-oriented macros to return lists from
XSUB's - see "mPUSHu" instead. See also "XPUSHu" and
"mXPUSHu".
void PUSHu(UV uv)
PUTBACK Closing bracket for XSUB arguments. This is usually handled by
"xsubpp". See "PUSHMARK" and perlcall for other uses.
PUTBACK;
SP Stack pointer. This is usually handled by "xsubpp". See "dSP"
and "SPAGAIN".
SPAGAIN Refetch the stack pointer. Used after a callback. See
perlcall.
SPAGAIN;
XPUSHi Push an integer onto the stack, extending the stack if
necessary. Handles 'set' magic. Uses "TARG", so "dTARGET" or
"dXSTARG" should be called to declare it. Do not call multiple
"TARG"-oriented macros to return lists from XSUB's - see
"mXPUSHi" instead. See also "PUSHi" and "mPUSHi".
void XPUSHi(IV iv)
XPUSHmortal
Push a new mortal SV onto the stack, extending the stack if
necessary. Does not use "TARG". See also "XPUSHs",
"PUSHmortal" and "PUSHs".
void XPUSHmortal()
XPUSHn Push a double onto the stack, extending the stack if necessary.
Handles 'set' magic. Uses "TARG", so "dTARGET" or "dXSTARG"
should be called to declare it. Do not call multiple
"TARG"-oriented macros to return lists from XSUB's - see
"mXPUSHn" instead. See also "PUSHn" and "mPUSHn".
void XPUSHn(NV nv)
XPUSHp Push a string onto the stack, extending the stack if necessary.
The "len" indicates the length of the string. Handles 'set'
magic. Uses "TARG", so "dTARGET" or "dXSTARG" should be called
to declare it. Do not call multiple "TARG"-oriented macros to
return lists from XSUB's - see "mXPUSHp" instead. See also
"PUSHp" and "mPUSHp".
void XPUSHp(char* str, STRLEN len)
XPUSHs Push an SV onto the stack, extending the stack if necessary.
Does not handle 'set' magic. Does not use "TARG". See also
"XPUSHmortal", "PUSHs" and "PUSHmortal".
void XPUSHs(SV* sv)
XPUSHu Push an unsigned integer onto the stack, extending the stack if
necessary. Handles 'set' magic. Uses "TARG", so "dTARGET" or
"dXSTARG" should be called to declare it. Do not call multiple
"TARG"-oriented macros to return lists from XSUB's - see
"mXPUSHu" instead. See also "PUSHu" and "mPUSHu".
void XPUSHu(UV uv)
XSRETURN
Return from XSUB, indicating number of items on the stack.
This is usually handled by "xsubpp".
void XSRETURN(int nitems)
XSRETURN_EMPTY
Return an empty list from an XSUB immediately.
XSRETURN_EMPTY;
XSRETURN_IV
Return an integer from an XSUB immediately. Uses "XST_mIV".
void XSRETURN_IV(IV iv)
XSRETURN_NO
Return &PL_sv_no from an XSUB immediately. Uses "XST_mNO".
XSRETURN_NO;
XSRETURN_NV
Return a double from an XSUB immediately. Uses "XST_mNV".
void XSRETURN_NV(NV nv)
XSRETURN_PV
Return a copy of a string from an XSUB immediately. Uses
"XST_mPV".
void XSRETURN_PV(char* str)
XSRETURN_UNDEF
Return &PL_sv_undef from an XSUB immediately. Uses
"XST_mUNDEF".
XSRETURN_UNDEF;
XSRETURN_UV
Return an integer from an XSUB immediately. Uses "XST_mUV".
void XSRETURN_UV(IV uv)
XSRETURN_YES
Return &PL_sv_yes from an XSUB immediately. Uses "XST_mYES".
XSRETURN_YES;
XST_mIV Place an integer into the specified position "pos" on the
stack. The value is stored in a new mortal SV.
void XST_mIV(int pos, IV iv)
XST_mNO Place &PL_sv_no into the specified position "pos" on the stack.
void XST_mNO(int pos)
XST_mNV Place a double into the specified position "pos" on the stack.
The value is stored in a new mortal SV.
void XST_mNV(int pos, NV nv)
XST_mPV Place a copy of a string into the specified position "pos" on
the stack. The value is stored in a new mortal SV.
void XST_mPV(int pos, char* str)
XST_mUNDEF
Place &PL_sv_undef into the specified position "pos" on the
stack.
void XST_mUNDEF(int pos)
XST_mYES
Place &PL_sv_yes into the specified position "pos" on the
stack.
void XST_mYES(int pos)
SV Flags
svtype An enum of flags for Perl types. These are found in the file
sv.h in the "svtype" enum. Test these flags with the "SvTYPE"
macro.
SVt_IV Integer type flag for scalars. See "svtype".
SVt_NV Double type flag for scalars. See "svtype".
SVt_PV Pointer type flag for scalars. See "svtype".
SVt_PVAV
Type flag for arrays. See "svtype".
SVt_PVCV
Type flag for code refs. See "svtype".
SVt_PVHV
Type flag for hashes. See "svtype".
SVt_PVMG
Type flag for blessed scalars. See "svtype".
SV Manipulation Functions
boolSV Returns a true SV if "b" is a true value, or a false SV if "b"
is 0.
See also "PL_sv_yes" and "PL_sv_no".
SV * boolSV(bool b)
croak_xs_usage
A specialised variant of "croak()" for emitting the usage
message for xsubs
croak_xs_usage(cv, "eee_yow");
works out the package name and subroutine name from "cv", and
then calls "croak()". Hence if "cv" is &ouch::awk, it would
call "croak" as:
Perl_croak(aTHX_ "Usage: %"SVf"::%"SVf"(%s)", "ouch" "awk", "eee_yow");
void croak_xs_usage(const CV *const cv,
const char *const params)
get_sv Returns the SV of the specified Perl scalar. "flags" are
passed to "gv_fetchpv". If "GV_ADD" is set and the Perl
variable does not exist then it will be created. If "flags" is
zero and the variable does not exist then NULL is returned.
NOTE: the perl_ form of this function is deprecated.
SV* get_sv(const char *name, I32 flags)
newRV_inc
Creates an RV wrapper for an SV. The reference count for the
original SV is incremented.
SV* newRV_inc(SV* sv)
newSVpvn_utf8
Creates a new SV and copies a string into it. If utf8 is true,
calls "SvUTF8_on" on the new SV. Implemented as a wrapper
around "newSVpvn_flags".
SV* newSVpvn_utf8(NULLOK const char* s, STRLEN len,
U32 utf8)
SvCUR Returns the length of the string which is in the SV. See
"SvLEN".
STRLEN SvCUR(SV* sv)
SvCUR_set
Set the current length of the string which is in the SV. See
"SvCUR" and "SvIV_set".
void SvCUR_set(SV* sv, STRLEN len)
SvEND Returns a pointer to the spot just after the last character in
the string which is in the SV, where there is usually a
trailing null (even though Perl scalars do not strictly require
it). See "SvCUR". Access the character as *(SvEND(sv)).
Warning: If "SvCUR" is equal to "SvLEN", then "SvEND" points to
unallocated memory.
char* SvEND(SV* sv)
SvGAMAGIC
Returns true if the SV has get magic or overloading. If either
is true then the scalar is active data, and has the potential
to return a new value every time it is accessed. Hence you
must be careful to only read it once per user logical operation
and work with that returned value. If neither is true then the
scalar's value cannot change unless written to.
U32 SvGAMAGIC(SV* sv)
SvGROW Expands the character buffer in the SV so that it has room for
the indicated number of bytes (remember to reserve space for an
extra trailing NUL character). Calls "sv_grow" to perform the
expansion if necessary. Returns a pointer to the character
buffer.
char * SvGROW(SV* sv, STRLEN len)
SvIOK Returns a U32 value indicating whether the SV contains an
integer.
U32 SvIOK(SV* sv)
SvIOKp Returns a U32 value indicating whether the SV contains an
integer. Checks the private setting. Use "SvIOK" instead.
U32 SvIOKp(SV* sv)
SvIOK_notUV
Returns a boolean indicating whether the SV contains a signed
integer.
bool SvIOK_notUV(SV* sv)
SvIOK_off
Unsets the IV status of an SV.
void SvIOK_off(SV* sv)
SvIOK_on
Tells an SV that it is an integer.
void SvIOK_on(SV* sv)
SvIOK_only
Tells an SV that it is an integer and disables all other OK
bits.
void SvIOK_only(SV* sv)
SvIOK_only_UV
Tells and SV that it is an unsigned integer and disables all
other OK bits.
void SvIOK_only_UV(SV* sv)
SvIOK_UV
Returns a boolean indicating whether the SV contains an
unsigned integer.
bool SvIOK_UV(SV* sv)
SvIsCOW Returns a boolean indicating whether the SV is Copy-On-Write
(either shared hash key scalars, or full Copy On Write scalars
if 5.9.0 is configured for COW).
bool SvIsCOW(SV* sv)
SvIsCOW_shared_hash
Returns a boolean indicating whether the SV is Copy-On-Write
shared hash key scalar.
bool SvIsCOW_shared_hash(SV* sv)
SvIV Coerces the given SV to an integer and returns it. See "SvIVx"
for a version which guarantees to evaluate sv only once.
IV SvIV(SV* sv)
SvIVX Returns the raw value in the SV's IV slot, without checks or
conversions. Only use when you are sure SvIOK is true. See
also "SvIV()".
IV SvIVX(SV* sv)
SvIVx Coerces the given SV to an integer and returns it. Guarantees
to evaluate "sv" only once. Only use this if "sv" is an
expression with side effects, otherwise use the more efficient
"SvIV".
IV SvIVx(SV* sv)
SvIV_nomg
Like "SvIV" but doesn't process magic.
IV SvIV_nomg(SV* sv)
SvIV_set
Set the value of the IV pointer in sv to val. It is possible
to perform the same function of this macro with an lvalue
assignment to "SvIVX". With future Perls, however, it will be
more efficient to use "SvIV_set" instead of the lvalue
assignment to "SvIVX".
void SvIV_set(SV* sv, IV val)
SvLEN Returns the size of the string buffer in the SV, not including
any part attributable to "SvOOK". See "SvCUR".
STRLEN SvLEN(SV* sv)
SvLEN_set
Set the actual length of the string which is in the SV. See
"SvIV_set".
void SvLEN_set(SV* sv, STRLEN len)
SvMAGIC_set
Set the value of the MAGIC pointer in sv to val. See
"SvIV_set".
void SvMAGIC_set(SV* sv, MAGIC* val)
SvNIOK Returns a U32 value indicating whether the SV contains a
number, integer or double.
U32 SvNIOK(SV* sv)
SvNIOKp Returns a U32 value indicating whether the SV contains a
number, integer or double. Checks the private setting. Use
"SvNIOK" instead.
U32 SvNIOKp(SV* sv)
SvNIOK_off
Unsets the NV/IV status of an SV.
void SvNIOK_off(SV* sv)
SvNOK Returns a U32 value indicating whether the SV contains a
double.
U32 SvNOK(SV* sv)
SvNOKp Returns a U32 value indicating whether the SV contains a
double. Checks the private setting. Use "SvNOK" instead.
U32 SvNOKp(SV* sv)
SvNOK_off
Unsets the NV status of an SV.
void SvNOK_off(SV* sv)
SvNOK_on
Tells an SV that it is a double.
void SvNOK_on(SV* sv)
SvNOK_only
Tells an SV that it is a double and disables all other OK bits.
void SvNOK_only(SV* sv)
SvNV Coerce the given SV to a double and return it. See "SvNVx" for
a version which guarantees to evaluate sv only once.
NV SvNV(SV* sv)
SvNVX Returns the raw value in the SV's NV slot, without checks or
conversions. Only use when you are sure SvNOK is true. See
also "SvNV()".
NV SvNVX(SV* sv)
SvNVx Coerces the given SV to a double and returns it. Guarantees to
evaluate "sv" only once. Only use this if "sv" is an
expression with side effects, otherwise use the more efficient
"SvNV".
NV SvNVx(SV* sv)
SvNV_nomg
Like "SvNV" but doesn't process magic.
NV SvNV_nomg(SV* sv)
SvNV_set
Set the value of the NV pointer in sv to val. See "SvIV_set".
void SvNV_set(SV* sv, NV val)
SvOK Returns a U32 value indicating whether the value is defined.
This is only meaningful for scalars.
U32 SvOK(SV* sv)
SvOOK Returns a U32 indicating whether the pointer to the string
buffer is offset. This hack is used internally to speed up
removal of characters from the beginning of a SvPV. When SvOOK
is true, then the start of the allocated string buffer is
actually "SvOOK_offset()" bytes before SvPVX. This offset used
to be stored in SvIVX, but is now stored within the spare part
of the buffer.
U32 SvOOK(SV* sv)
SvOOK_offset
Reads into len the offset from SvPVX back to the true start of
the allocated buffer, which will be non-zero if "sv_chop" has
been used to efficiently remove characters from start of the
buffer. Implemented as a macro, which takes the address of
len, which must be of type "STRLEN". Evaluates sv more than
once. Sets len to 0 if "SvOOK(sv)" is false.
void SvOOK_offset(NN SV*sv, STRLEN len)
SvPOK Returns a U32 value indicating whether the SV contains a
character string.
U32 SvPOK(SV* sv)
SvPOKp Returns a U32 value indicating whether the SV contains a
character string. Checks the private setting. Use "SvPOK"
instead.
U32 SvPOKp(SV* sv)
SvPOK_off
Unsets the PV status of an SV.
void SvPOK_off(SV* sv)
SvPOK_on
Tells an SV that it is a string.
void SvPOK_on(SV* sv)
SvPOK_only
Tells an SV that it is a string and disables all other OK bits.
Will also turn off the UTF-8 status.
void SvPOK_only(SV* sv)
SvPOK_only_UTF8
Tells an SV that it is a string and disables all other OK bits,
and leaves the UTF-8 status as it was.
void SvPOK_only_UTF8(SV* sv)
SvPV Returns a pointer to the string in the SV, or a stringified
form of the SV if the SV does not contain a string. The SV may
cache the stringified version becoming "SvPOK". Handles 'get'
magic. See also "SvPVx" for a version which guarantees to
evaluate sv only once.
char* SvPV(SV* sv, STRLEN len)
SvPVbyte
Like "SvPV", but converts sv to byte representation first if
necessary.
char* SvPVbyte(SV* sv, STRLEN len)
SvPVbytex
Like "SvPV", but converts sv to byte representation first if
necessary. Guarantees to evaluate sv only once; use the more
efficient "SvPVbyte" otherwise.
char* SvPVbytex(SV* sv, STRLEN len)
SvPVbytex_force
Like "SvPV_force", but converts sv to byte representation first
if necessary. Guarantees to evaluate sv only once; use the
more efficient "SvPVbyte_force" otherwise.
char* SvPVbytex_force(SV* sv, STRLEN len)
SvPVbyte_force
Like "SvPV_force", but converts sv to byte representation first
if necessary.
char* SvPVbyte_force(SV* sv, STRLEN len)
SvPVbyte_nolen
Like "SvPV_nolen", but converts sv to byte representation first
if necessary.
char* SvPVbyte_nolen(SV* sv)
SvPVutf8
Like "SvPV", but converts sv to utf8 first if necessary.
char* SvPVutf8(SV* sv, STRLEN len)
SvPVutf8x
Like "SvPV", but converts sv to utf8 first if necessary.
Guarantees to evaluate sv only once; use the more efficient
"SvPVutf8" otherwise.
char* SvPVutf8x(SV* sv, STRLEN len)
SvPVutf8x_force
Like "SvPV_force", but converts sv to utf8 first if necessary.
Guarantees to evaluate sv only once; use the more efficient
"SvPVutf8_force" otherwise.
char* SvPVutf8x_force(SV* sv, STRLEN len)
SvPVutf8_force
Like "SvPV_force", but converts sv to utf8 first if necessary.
char* SvPVutf8_force(SV* sv, STRLEN len)
SvPVutf8_nolen
Like "SvPV_nolen", but converts sv to utf8 first if necessary.
char* SvPVutf8_nolen(SV* sv)
SvPVX Returns a pointer to the physical string in the SV. The SV
must contain a string.
This is also used to store the name of an autoloaded subroutine
in an XS AUTOLOAD routine. See "Autoloading with XSUBs" in
perlguts.
char* SvPVX(SV* sv)
SvPVx A version of "SvPV" which guarantees to evaluate "sv" only
once. Only use this if "sv" is an expression with side
effects, otherwise use the more efficient "SvPV".
char* SvPVx(SV* sv, STRLEN len)
SvPV_force
Like "SvPV" but will force the SV into containing just a string
("SvPOK_only"). You want force if you are going to update the
"SvPVX" directly.
char* SvPV_force(SV* sv, STRLEN len)
SvPV_force_nomg
Like "SvPV" but will force the SV into containing just a string
("SvPOK_only"). You want force if you are going to update the
"SvPVX" directly. Doesn't process magic.
char* SvPV_force_nomg(SV* sv, STRLEN len)
SvPV_nolen
Returns a pointer to the string in the SV, or a stringified
form of the SV if the SV does not contain a string. The SV may
cache the stringified form becoming "SvPOK". Handles 'get'
magic.
char* SvPV_nolen(SV* sv)
SvPV_nomg
Like "SvPV" but doesn't process magic.
char* SvPV_nomg(SV* sv, STRLEN len)
SvPV_nomg_nolen
Like "SvPV_nolen" but doesn't process magic.
char* SvPV_nomg_nolen(SV* sv)
SvPV_set
Set the value of the PV pointer in sv to val. See "SvIV_set".
void SvPV_set(SV* sv, char* val)
SvREFCNT
Returns the value of the object's reference count.
U32 SvREFCNT(SV* sv)
SvREFCNT_dec
Decrements the reference count of the given SV.
void SvREFCNT_dec(SV* sv)
SvREFCNT_inc
Increments the reference count of the given SV.
All of the following SvREFCNT_inc* macros are optimized
versions of SvREFCNT_inc, and can be replaced with
SvREFCNT_inc.
SV* SvREFCNT_inc(SV* sv)
SvREFCNT_inc_NN
Same as SvREFCNT_inc, but can only be used if you know sv is
not NULL. Since we don't have to check the NULLness, it's
faster and smaller.
SV* SvREFCNT_inc_NN(SV* sv)
SvREFCNT_inc_simple
Same as SvREFCNT_inc, but can only be used with expressions
without side effects. Since we don't have to store a temporary
value, it's faster.
SV* SvREFCNT_inc_simple(SV* sv)
SvREFCNT_inc_simple_NN
Same as SvREFCNT_inc_simple, but can only be used if you know
sv is not NULL. Since we don't have to check the NULLness,
it's faster and smaller.
SV* SvREFCNT_inc_simple_NN(SV* sv)
SvREFCNT_inc_simple_void
Same as SvREFCNT_inc_simple, but can only be used if you don't
need the return value. The macro doesn't need to return a
meaningful value.
void SvREFCNT_inc_simple_void(SV* sv)
SvREFCNT_inc_simple_void_NN
Same as SvREFCNT_inc, but can only be used if you don't need
the return value, and you know that sv is not NULL. The macro
doesn't need to return a meaningful value, or check for
NULLness, so it's smaller and faster.
void SvREFCNT_inc_simple_void_NN(SV* sv)
SvREFCNT_inc_void
Same as SvREFCNT_inc, but can only be used if you don't need
the return value. The macro doesn't need to return a
meaningful value.
void SvREFCNT_inc_void(SV* sv)
SvREFCNT_inc_void_NN
Same as SvREFCNT_inc, but can only be used if you don't need
the return value, and you know that sv is not NULL. The macro
doesn't need to return a meaningful value, or check for
NULLness, so it's smaller and faster.
void SvREFCNT_inc_void_NN(SV* sv)
SvROK Tests if the SV is an RV.
U32 SvROK(SV* sv)
SvROK_off
Unsets the RV status of an SV.
void SvROK_off(SV* sv)
SvROK_on
Tells an SV that it is an RV.
void SvROK_on(SV* sv)
SvRV Dereferences an RV to return the SV.
SV* SvRV(SV* sv)
SvRV_set
Set the value of the RV pointer in sv to val. See "SvIV_set".
void SvRV_set(SV* sv, SV* val)
SvSTASH Returns the stash of the SV.
HV* SvSTASH(SV* sv)
SvSTASH_set
Set the value of the STASH pointer in sv to val. See
"SvIV_set".
void SvSTASH_set(SV* sv, HV* val)
SvTAINT Taints an SV if tainting is enabled, and if some input to the
current expression is tainted--usually a variable, but possibly
also implicit inputs such as locale settings. "SvTAINT"
propagates that taintedness to the outputs of an expression in
a pessimistic fashion; i.e., without paying attention to
precisely which outputs are influenced by which inputs.
void SvTAINT(SV* sv)
SvTAINTED
Checks to see if an SV is tainted. Returns TRUE if it is,
FALSE if not.
bool SvTAINTED(SV* sv)
SvTAINTED_off
Untaints an SV. Be very careful with this routine, as it
short-circuits some of Perl's fundamental security features.
XS module authors should not use this function unless they
fully understand all the implications of unconditionally
untainting the value. Untainting should be done in the standard
perl fashion, via a carefully crafted regexp, rather than
directly untainting variables.
void SvTAINTED_off(SV* sv)
SvTAINTED_on
Marks an SV as tainted if tainting is enabled.
void SvTAINTED_on(SV* sv)
SvTRUE Returns a boolean indicating whether Perl would evaluate the SV
as true or false. See SvOK() for a defined/undefined test.
Handles 'get' magic unless the scalar is already SvPOK, SvIOK
or SvNOK (the public, not the private flags).
bool SvTRUE(SV* sv)
SvTRUE_nomg
Returns a boolean indicating whether Perl would evaluate the SV
as true or false. See SvOK() for a defined/undefined test.
Does not handle 'get' magic.
bool SvTRUE_nomg(SV* sv)
SvTYPE Returns the type of the SV. See "svtype".
svtype SvTYPE(SV* sv)
SvUOK Returns a boolean indicating whether the SV contains an
unsigned integer.
bool SvUOK(SV* sv)
SvUPGRADE
Used to upgrade an SV to a more complex form. Uses
"sv_upgrade" to perform the upgrade if necessary. See
"svtype".
void SvUPGRADE(SV* sv, svtype type)
SvUTF8 Returns a U32 value indicating the UTF-8 status of an SV. If
things are set-up properly, this indicates whether or not the
SV contains UTF-8 encoded data. Call this after SvPV() in case
any call to string overloading updates the internal flag.
U32 SvUTF8(SV* sv)
SvUTF8_off
Unsets the UTF-8 status of an SV (the data is not changed, just
the flag). Do not use frivolously.
void SvUTF8_off(SV *sv)
SvUTF8_on
Turn on the UTF-8 status of an SV (the data is not changed,
just the flag). Do not use frivolously.
void SvUTF8_on(SV *sv)
SvUV Coerces the given SV to an unsigned integer and returns it.
See "SvUVx" for a version which guarantees to evaluate sv only
once.
UV SvUV(SV* sv)
SvUVX Returns the raw value in the SV's UV slot, without checks or
conversions. Only use when you are sure SvIOK is true. See
also "SvUV()".
UV SvUVX(SV* sv)
SvUVx Coerces the given SV to an unsigned integer and returns it.
Guarantees to "sv" only once. Only use this if "sv" is an
expression with side effects, otherwise use the more efficient
"SvUV".
UV SvUVx(SV* sv)
SvUV_nomg
Like "SvUV" but doesn't process magic.
UV SvUV_nomg(SV* sv)
SvUV_set
Set the value of the UV pointer in sv to val. See "SvIV_set".
void SvUV_set(SV* sv, UV val)
SvVOK Returns a boolean indicating whether the SV contains a
v-string.
bool SvVOK(SV* sv)
sv_catpvn_nomg
Like "sv_catpvn" but doesn't process magic.
void sv_catpvn_nomg(SV* sv, const char* ptr,
STRLEN len)
sv_catpv_nomg
Like "sv_catpv" but doesn't process magic.
void sv_catpv_nomg(SV* sv, const char* ptr)
sv_catsv_nomg
Like "sv_catsv" but doesn't process magic.
void sv_catsv_nomg(SV* dsv, SV* ssv)
sv_derived_from
Exactly like "sv_derived_from_pv", but doesn't take a "flags"
parameter.
bool sv_derived_from(SV* sv, const char *const name)
sv_derived_from_pv
Exactly like "sv_derived_from_pvn", but takes a nul-terminated
string instead of a string/length pair.
bool sv_derived_from_pv(SV* sv,
const char *const name,
U32 flags)
sv_derived_from_pvn
Returns a boolean indicating whether the SV is derived from the
specified class at the C level. To check derivation at the
Perl level, call "isa()" as a normal Perl method.
Currently, the only significant value for "flags" is SVf_UTF8.
bool sv_derived_from_pvn(SV* sv,
const char *const name,
const STRLEN len, U32 flags)
sv_derived_from_sv
Exactly like "sv_derived_from_pvn", but takes the name string
in the form of an SV instead of a string/length pair.
bool sv_derived_from_sv(SV* sv, SV *namesv,
U32 flags)
sv_does Like "sv_does_pv", but doesn't take a "flags" parameter.
bool sv_does(SV* sv, const char *const name)
sv_does_pv
Like "sv_does_sv", but takes a nul-terminated string instead of
an SV.
bool sv_does_pv(SV* sv, const char *const name,
U32 flags)
sv_does_pvn
Like "sv_does_sv", but takes a string/length pair instead of an
SV.
bool sv_does_pvn(SV* sv, const char *const name,
const STRLEN len, U32 flags)
sv_does_sv
Returns a boolean indicating whether the SV performs a
specific, named role. The SV can be a Perl object or the name
of a Perl class.
bool sv_does_sv(SV* sv, SV* namesv, U32 flags)
sv_report_used
Dump the contents of all SVs not yet freed (debugging aid).
void sv_report_used()
sv_setsv_nomg
Like "sv_setsv" but doesn't process magic.
void sv_setsv_nomg(SV* dsv, SV* ssv)
sv_utf8_upgrade_nomg
Like sv_utf8_upgrade, but doesn't do magic on "sv".
STRLEN sv_utf8_upgrade_nomg(NN SV *sv)
SV-Body Allocation
looks_like_number
Test if the content of an SV looks like a number (or is a
number). "Inf" and "Infinity" are treated as numbers (so will
not issue a non-numeric warning), even if your atof() doesn't
grok them. Get-magic is ignored.
I32 looks_like_number(SV *const sv)
newRV_noinc
Creates an RV wrapper for an SV. The reference count for the
original SV is not incremented.
SV* newRV_noinc(SV *const sv)
newSV Creates a new SV. A non-zero "len" parameter indicates the
number of bytes of preallocated string space the SV should
have. An extra byte for a trailing NUL is also reserved.
(SvPOK is not set for the SV even if string space is
allocated.) The reference count for the new SV is set to 1.
In 5.9.3, newSV() replaces the older NEWSV() API, and drops the
first parameter, x, a debug aid which allowed callers to
identify themselves. This aid has been superseded by a new
build option, PERL_MEM_LOG (see "PERL_MEM_LOG" in
perlhacktips). The older API is still there for use in XS
modules supporting older perls.
SV* newSV(const STRLEN len)
newSVhek
Creates a new SV from the hash key structure. It will generate
scalars that point to the shared string table where possible.
Returns a new (undefined) SV if the hek is NULL.
SV* newSVhek(const HEK *const hek)
newSViv Creates a new SV and copies an integer into it. The reference
count for the SV is set to 1.
SV* newSViv(const IV i)
newSVnv Creates a new SV and copies a floating point value into it.
The reference count for the SV is set to 1.
SV* newSVnv(const NV n)
newSVpv Creates a new SV and copies a string into it. The reference
count for the SV is set to 1. If "len" is zero, Perl will
compute the length using strlen(). For efficiency, consider
using "newSVpvn" instead.
SV* newSVpv(const char *const s, const STRLEN len)
newSVpvf
Creates a new SV and initializes it with the string formatted
like "sprintf".
SV* newSVpvf(const char *const pat, ...)
newSVpvn
Creates a new SV and copies a buffer into it, which may contain
NUL characters ("\0") and other binary data. The reference
count for the SV is set to 1. Note that if "len" is zero, Perl
will create a zero length (Perl) string. You are responsible
for ensuring that the source buffer is at least "len" bytes
long. If the "buffer" argument is NULL the new SV will be
undefined.
SV* newSVpvn(const char *const s, const STRLEN len)
newSVpvn_flags
Creates a new SV and copies a string into it. The reference
count for the SV is set to 1. Note that if "len" is zero, Perl
will create a zero length string. You are responsible for
ensuring that the source string is at least "len" bytes long.
If the "s" argument is NULL the new SV will be undefined.
Currently the only flag bits accepted are "SVf_UTF8" and
"SVs_TEMP". If "SVs_TEMP" is set, then "sv_2mortal()" is
called on the result before returning. If "SVf_UTF8" is set,
"s" is considered to be in UTF-8 and the "SVf_UTF8" flag will
be set on the new SV. "newSVpvn_utf8()" is a convenience
wrapper for this function, defined as
#define newSVpvn_utf8(s, len, u) \
newSVpvn_flags((s), (len), (u) ? SVf_UTF8 : 0)
SV* newSVpvn_flags(const char *const s,
const STRLEN len,
const U32 flags)
newSVpvn_share
Creates a new SV with its SvPVX_const pointing to a shared
string in the string table. If the string does not already
exist in the table, it is created first. Turns on READONLY and
FAKE. If the "hash" parameter is non-zero, that value is used;
otherwise the hash is computed. The string's hash can later be
retrieved from the SV with the "SvSHARED_HASH()" macro. The
idea here is that as the string table is used for shared hash
keys these strings will have SvPVX_const == HeKEY and hash
lookup will avoid string compare.
SV* newSVpvn_share(const char* s, I32 len, U32 hash)
newSVpvs
Like "newSVpvn", but takes a literal string instead of a
string/length pair.
SV* newSVpvs(const char* s)
newSVpvs_flags
Like "newSVpvn_flags", but takes a literal string instead of a
string/length pair.
SV* newSVpvs_flags(const char* s, U32 flags)
newSVpvs_share
Like "newSVpvn_share", but takes a literal string instead of a
string/length pair and omits the hash parameter.
SV* newSVpvs_share(const char* s)
newSVpv_share
Like "newSVpvn_share", but takes a nul-terminated string
instead of a string/length pair.
SV* newSVpv_share(const char* s, U32 hash)
newSVrv Creates a new SV for the RV, "rv", to point to. If "rv" is not
an RV then it will be upgraded to one. If "classname" is non-
null then the new SV will be blessed in the specified package.
The new SV is returned and its reference count is 1.
SV* newSVrv(SV *const rv,
const char *const classname)
newSVsv Creates a new SV which is an exact duplicate of the original
SV. (Uses "sv_setsv".)
SV* newSVsv(SV *const old)
newSVuv Creates a new SV and copies an unsigned integer into it. The
reference count for the SV is set to 1.
SV* newSVuv(const UV u)
newSV_type
Creates a new SV, of the type specified. The reference count
for the new SV is set to 1.
SV* newSV_type(const svtype type)
sv_2bool
This macro is only used by sv_true() or its macro equivalent,
and only if the latter's argument is neither SvPOK, SvIOK nor
SvNOK. It calls sv_2bool_flags with the SV_GMAGIC flag.
bool sv_2bool(SV *const sv)
sv_2bool_flags
This function is only used by sv_true() and friends, and only
if the latter's argument is neither SvPOK, SvIOK nor SvNOK. If
the flags contain SV_GMAGIC, then it does an mg_get() first.
bool sv_2bool_flags(SV *const sv, const I32 flags)
sv_2cv Using various gambits, try to get a CV from an SV; in addition,
try if possible to set *st and *gvp to the stash and GV
associated with it. The flags in "lref" are passed to
gv_fetchsv.
CV* sv_2cv(SV* sv, HV **const st, GV **const gvp,
const I32 lref)
sv_2io Using various gambits, try to get an IO from an SV: the IO slot
if its a GV; or the recursive result if we're an RV; or the IO
slot of the symbol named after the PV if we're a string.
'Get' magic is ignored on the sv passed in, but will be called
on "SvRV(sv)" if sv is an RV.
IO* sv_2io(SV *const sv)
sv_2iv_flags
Return the integer value of an SV, doing any necessary string
conversion. If flags includes SV_GMAGIC, does an mg_get()
first. Normally used via the "SvIV(sv)" and "SvIVx(sv)"
macros.
IV sv_2iv_flags(SV *const sv, const I32 flags)
sv_2mortal
Marks an existing SV as mortal. The SV will be destroyed
"soon", either by an explicit call to FREETMPS, or by an
implicit call at places such as statement boundaries. SvTEMP()
is turned on which means that the SV's string buffer can be
"stolen" if this SV is copied. See also "sv_newmortal" and
"sv_mortalcopy".
SV* sv_2mortal(SV *const sv)
sv_2nv_flags
Return the num value of an SV, doing any necessary string or
integer conversion. If flags includes SV_GMAGIC, does an
mg_get() first. Normally used via the "SvNV(sv)" and
"SvNVx(sv)" macros.
NV sv_2nv_flags(SV *const sv, const I32 flags)
sv_2pvbyte
Return a pointer to the byte-encoded representation of the SV,
and set *lp to its length. May cause the SV to be downgraded
from UTF-8 as a side-effect.
Usually accessed via the "SvPVbyte" macro.
char* sv_2pvbyte(SV *sv, STRLEN *const lp)
sv_2pvutf8
Return a pointer to the UTF-8-encoded representation of the SV,
and set *lp to its length. May cause the SV to be upgraded to
UTF-8 as a side-effect.
Usually accessed via the "SvPVutf8" macro.
char* sv_2pvutf8(SV *sv, STRLEN *const lp)
sv_2pv_flags
Returns a pointer to the string value of an SV, and sets *lp to
its length. If flags includes SV_GMAGIC, does an mg_get()
first. Coerces sv to a string if necessary. Normally invoked
via the "SvPV_flags" macro. "sv_2pv()" and "sv_2pv_nomg"
usually end up here too.
char* sv_2pv_flags(SV *const sv, STRLEN *const lp,
const I32 flags)
sv_2uv_flags
Return the unsigned integer value of an SV, doing any necessary
string conversion. If flags includes SV_GMAGIC, does an
mg_get() first. Normally used via the "SvUV(sv)" and
"SvUVx(sv)" macros.
UV sv_2uv_flags(SV *const sv, const I32 flags)
sv_backoff
Remove any string offset. You should normally use the
"SvOOK_off" macro wrapper instead.
int sv_backoff(SV *const sv)
sv_bless
Blesses an SV into a specified package. The SV must be an RV.
The package must be designated by its stash (see
"gv_stashpv()"). The reference count of the SV is unaffected.
SV* sv_bless(SV *const sv, HV *const stash)
sv_catpv
Concatenates the string onto the end of the string which is in
the SV. If the SV has the UTF-8 status set, then the bytes
appended should be valid UTF-8. Handles 'get' magic, but not
'set' magic. See "sv_catpv_mg".
void sv_catpv(SV *const sv, const char* ptr)
sv_catpvf
Processes its arguments like "sprintf" and appends the
formatted output to an SV. If the appended data contains
"wide" characters (including, but not limited to, SVs with a
UTF-8 PV formatted with %s, and characters >255 formatted with
%c), the original SV might get upgraded to UTF-8. Handles
'get' magic, but not 'set' magic. See "sv_catpvf_mg". If the
original SV was UTF-8, the pattern should be valid UTF-8; if
the original SV was bytes, the pattern should be too.
void sv_catpvf(SV *const sv, const char *const pat,
...)
sv_catpvf_mg
Like "sv_catpvf", but also handles 'set' magic.
void sv_catpvf_mg(SV *const sv,
const char *const pat, ...)
sv_catpvn
Concatenates the string onto the end of the string which is in
the SV. The "len" indicates number of bytes to copy. If the
SV has the UTF-8 status set, then the bytes appended should be
valid UTF-8. Handles 'get' magic, but not 'set' magic. See
"sv_catpvn_mg".
void sv_catpvn(SV *dsv, const char *sstr, STRLEN len)
sv_catpvn_flags
Concatenates the string onto the end of the string which is in
the SV. The "len" indicates number of bytes to copy. If the
SV has the UTF-8 status set, then the bytes appended should be
valid UTF-8. If "flags" has the "SV_SMAGIC" bit set, will
"mg_set" on "dsv" afterwards if appropriate. "sv_catpvn" and
"sv_catpvn_nomg" are implemented in terms of this function.
void sv_catpvn_flags(SV *const dstr,
const char *sstr,
const STRLEN len,
const I32 flags)
sv_catpvs
Like "sv_catpvn", but takes a literal string instead of a
string/length pair.
void sv_catpvs(SV* sv, const char* s)
sv_catpvs_flags
Like "sv_catpvn_flags", but takes a literal string instead of a
string/length pair.
void sv_catpvs_flags(SV* sv, const char* s,
I32 flags)
sv_catpvs_mg
Like "sv_catpvn_mg", but takes a literal string instead of a
string/length pair.
void sv_catpvs_mg(SV* sv, const char* s)
sv_catpvs_nomg
Like "sv_catpvn_nomg", but takes a literal string instead of a
string/length pair.
void sv_catpvs_nomg(SV* sv, const char* s)
sv_catpv_flags
Concatenates the string onto the end of the string which is in
the SV. If the SV has the UTF-8 status set, then the bytes
appended should be valid UTF-8. If "flags" has the "SV_SMAGIC"
bit set, will "mg_set" on the modified SV if appropriate.
void sv_catpv_flags(SV *dstr, const char *sstr,
const I32 flags)
sv_catpv_mg
Like "sv_catpv", but also handles 'set' magic.
void sv_catpv_mg(SV *const sv, const char *const ptr)
sv_catsv
Concatenates the string from SV "ssv" onto the end of the
string in SV "dsv". Modifies "dsv" but not "ssv". Handles
'get' magic, but not 'set' magic. See "sv_catsv_mg".
void sv_catsv(SV *dstr, SV *sstr)
sv_catsv_flags
Concatenates the string from SV "ssv" onto the end of the
string in SV "dsv". Modifies "dsv" but not "ssv". If "flags"
has "SV_GMAGIC" bit set, will "mg_get" on the "ssv", if
appropriate, before reading it. If the "flags" contain
"SV_SMAGIC", "mg_set" will be called on the modified SV
afterward, if appropriate. "sv_catsv" and "sv_catsv_nomg" are
implemented in terms of this function.
void sv_catsv_flags(SV *const dsv, SV *const ssv,
const I32 flags)
sv_chop Efficient removal of characters from the beginning of the
string buffer. SvPOK(sv) must be true and the "ptr" must be a
pointer to somewhere inside the string buffer. The "ptr"
becomes the first character of the adjusted string. Uses the
"OOK hack".
Beware: after this function returns, "ptr" and SvPVX_const(sv)
may no longer refer to the same chunk of data.
The unfortunate similarity of this function's name to that of
Perl's "chop" operator is strictly coincidental. This function
works from the left; "chop" works from the right.
void sv_chop(SV *const sv, const char *const ptr)
sv_clear
Clear an SV: call any destructors, free up any memory used by
the body, and free the body itself. The SV's head is not
freed, although its type is set to all 1's so that it won't
inadvertently be assumed to be live during global destruction
etc. This function should only be called when REFCNT is zero.
Most of the time you'll want to call "sv_free()" (or its macro
wrapper "SvREFCNT_dec") instead.
void sv_clear(SV *const orig_sv)
sv_cmp Compares the strings in two SVs. Returns -1, 0, or 1
indicating whether the string in "sv1" is less than, equal to,
or greater than the string in "sv2". Is UTF-8 and 'use bytes'
aware, handles get magic, and will coerce its args to strings
if necessary. See also "sv_cmp_locale".
I32 sv_cmp(SV *const sv1, SV *const sv2)
sv_cmp_flags
Compares the strings in two SVs. Returns -1, 0, or 1
indicating whether the string in "sv1" is less than, equal to,
or greater than the string in "sv2". Is UTF-8 and 'use bytes'
aware and will coerce its args to strings if necessary. If the
flags include SV_GMAGIC, it handles get magic. See also
"sv_cmp_locale_flags".
I32 sv_cmp_flags(SV *const sv1, SV *const sv2,
const U32 flags)
sv_cmp_locale
Compares the strings in two SVs in a locale-aware manner. Is
UTF-8 and 'use bytes' aware, handles get magic, and will coerce
its args to strings if necessary. See also "sv_cmp".
I32 sv_cmp_locale(SV *const sv1, SV *const sv2)
sv_cmp_locale_flags
Compares the strings in two SVs in a locale-aware manner. Is
UTF-8 and 'use bytes' aware and will coerce its args to strings
if necessary. If the flags contain SV_GMAGIC, it handles get
magic. See also "sv_cmp_flags".
I32 sv_cmp_locale_flags(SV *const sv1,
SV *const sv2,
const U32 flags)
sv_collxfrm
This calls "sv_collxfrm_flags" with the SV_GMAGIC flag. See
"sv_collxfrm_flags".
char* sv_collxfrm(SV *const sv, STRLEN *const nxp)
sv_collxfrm_flags
Add Collate Transform magic to an SV if it doesn't already have
it. If the flags contain SV_GMAGIC, it handles get-magic.
Any scalar variable may carry PERL_MAGIC_collxfrm magic that
contains the scalar data of the variable, but transformed to
such a format that a normal memory comparison can be used to
compare the data according to the locale settings.
char* sv_collxfrm_flags(SV *const sv,
STRLEN *const nxp,
I32 const flags)
sv_copypv
Copies a stringified representation of the source SV into the
destination SV. Automatically performs any necessary mg_get
and coercion of numeric values into strings. Guaranteed to
preserve UTF8 flag even from overloaded objects. Similar in
nature to sv_2pv[_flags] but operates directly on an SV instead
of just the string. Mostly uses sv_2pv_flags to do its work,
except when that would lose the UTF-8'ness of the PV.
void sv_copypv(SV *const dsv, SV *const ssv)
sv_dec Auto-decrement of the value in the SV, doing string to numeric
conversion if necessary. Handles 'get' magic and operator
overloading.
void sv_dec(SV *const sv)
sv_dec_nomg
Auto-decrement of the value in the SV, doing string to numeric
conversion if necessary. Handles operator overloading. Skips
handling 'get' magic.
void sv_dec_nomg(SV *const sv)
sv_eq Returns a boolean indicating whether the strings in the two SVs
are identical. Is UTF-8 and 'use bytes' aware, handles get
magic, and will coerce its args to strings if necessary.
I32 sv_eq(SV* sv1, SV* sv2)
sv_eq_flags
Returns a boolean indicating whether the strings in the two SVs
are identical. Is UTF-8 and 'use bytes' aware and coerces its
args to strings if necessary. If the flags include SV_GMAGIC,
it handles get-magic, too.
I32 sv_eq_flags(SV* sv1, SV* sv2, const U32 flags)
sv_force_normal_flags
Undo various types of fakery on an SV: if the PV is a shared
string, make a private copy; if we're a ref, stop refing; if
we're a glob, downgrade to an xpvmg; if we're a copy-on-write
scalar, this is the on-write time when we do the copy, and is
also used locally. If "SV_COW_DROP_PV" is set then a copy-on-
write scalar drops its PV buffer (if any) and becomes SvPOK_off
rather than making a copy. (Used where this scalar is about to
be set to some other value.) In addition, the "flags"
parameter gets passed to "sv_unref_flags()" when unreffing.
"sv_force_normal" calls this function with flags set to 0.
void sv_force_normal_flags(SV *const sv,
const U32 flags)
sv_free Decrement an SV's reference count, and if it drops to zero,
call "sv_clear" to invoke destructors and free up any memory
used by the body; finally, deallocate the SV's head itself.
Normally called via a wrapper macro "SvREFCNT_dec".
void sv_free(SV *const sv)
sv_gets Get a line from the filehandle and store it into the SV,
optionally appending to the currently-stored string.
char* sv_gets(SV *const sv, PerlIO *const fp,
I32 append)
sv_grow Expands the character buffer in the SV. If necessary, uses
"sv_unref" and upgrades the SV to "SVt_PV". Returns a pointer
to the character buffer. Use the "SvGROW" wrapper instead.
char* sv_grow(SV *const sv, STRLEN newlen)
sv_inc Auto-increment of the value in the SV, doing string to numeric
conversion if necessary. Handles 'get' magic and operator
overloading.
void sv_inc(SV *const sv)
sv_inc_nomg
Auto-increment of the value in the SV, doing string to numeric
conversion if necessary. Handles operator overloading. Skips
handling 'get' magic.
void sv_inc_nomg(SV *const sv)
sv_insert
Inserts a string at the specified offset/length within the SV.
Similar to the Perl substr() function. Handles get magic.
void sv_insert(SV *const bigstr, const STRLEN offset,
const STRLEN len,
const char *const little,
const STRLEN littlelen)
sv_insert_flags
Same as "sv_insert", but the extra "flags" are passed to the
"SvPV_force_flags" that applies to "bigstr".
void sv_insert_flags(SV *const bigstr,
const STRLEN offset,
const STRLEN len,
const char *const little,
const STRLEN littlelen,
const U32 flags)
sv_isa Returns a boolean indicating whether the SV is blessed into the
specified class. This does not check for subtypes; use
"sv_derived_from" to verify an inheritance relationship.
int sv_isa(SV* sv, const char *const name)
sv_isobject
Returns a boolean indicating whether the SV is an RV pointing
to a blessed object. If the SV is not an RV, or if the object
is not blessed, then this will return false.
int sv_isobject(SV* sv)
sv_len Returns the length of the string in the SV. Handles magic and
type coercion. See also "SvCUR", which gives raw access to the
xpv_cur slot.
STRLEN sv_len(SV *const sv)
sv_len_utf8
Returns the number of characters in the string in an SV,
counting wide UTF-8 bytes as a single character. Handles magic
and type coercion.
STRLEN sv_len_utf8(SV *const sv)
sv_magic
Adds magic to an SV. First upgrades "sv" to type "SVt_PVMG" if
necessary, then adds a new magic item of type "how" to the head
of the magic list.
See "sv_magicext" (which "sv_magic" now calls) for a
description of the handling of the "name" and "namlen"
arguments.
You need to use "sv_magicext" to add magic to SvREADONLY SVs
and also to add more than one instance of the same 'how'.
void sv_magic(SV *const sv, SV *const obj,
const int how, const char *const name,
const I32 namlen)
sv_magicext
Adds magic to an SV, upgrading it if necessary. Applies the
supplied vtable and returns a pointer to the magic added.
Note that "sv_magicext" will allow things that "sv_magic" will
not. In particular, you can add magic to SvREADONLY SVs, and
add more than one instance of the same 'how'.
If "namlen" is greater than zero then a "savepvn" copy of
"name" is stored, if "namlen" is zero then "name" is stored as-
is and - as another special case - if "(name && namlen ==
HEf_SVKEY)" then "name" is assumed to contain an "SV*" and is
stored as-is with its REFCNT incremented.
(This is now used as a subroutine by "sv_magic".)
MAGIC * sv_magicext(SV *const sv, SV *const obj,
const int how,
const MGVTBL *const vtbl,
const char *const name,
const I32 namlen)
sv_mortalcopy
Creates a new SV which is a copy of the original SV (using
"sv_setsv"). The new SV is marked as mortal. It will be
destroyed "soon", either by an explicit call to FREETMPS, or by
an implicit call at places such as statement boundaries. See
also "sv_newmortal" and "sv_2mortal".
SV* sv_mortalcopy(SV *const oldsv)
sv_newmortal
Creates a new null SV which is mortal. The reference count of
the SV is set to 1. It will be destroyed "soon", either by an
explicit call to FREETMPS, or by an implicit call at places
such as statement boundaries. See also "sv_mortalcopy" and
"sv_2mortal".
SV* sv_newmortal()
sv_newref
Increment an SV's reference count. Use the "SvREFCNT_inc()"
wrapper instead.
SV* sv_newref(SV *const sv)
sv_pos_b2u
Converts the value pointed to by offsetp from a count of bytes
from the start of the string, to a count of the equivalent
number of UTF-8 chars. Handles magic and type coercion.
void sv_pos_b2u(SV *const sv, I32 *const offsetp)
sv_pos_u2b
Converts the value pointed to by offsetp from a count of UTF-8
chars from the start of the string, to a count of the
equivalent number of bytes; if lenp is non-zero, it does the
same to lenp, but this time starting from the offset, rather
than from the start of the string. Handles magic and type
coercion.
Use "sv_pos_u2b_flags" in preference, which correctly handles
strings longer than 2Gb.
void sv_pos_u2b(SV *const sv, I32 *const offsetp,
I32 *const lenp)
sv_pos_u2b_flags
Converts the value pointed to by offsetp from a count of UTF-8
chars from the start of the string, to a count of the
equivalent number of bytes; if lenp is non-zero, it does the
same to lenp, but this time starting from the offset, rather
than from the start of the string. Handles type coercion.
flags is passed to "SvPV_flags", and usually should be
"SV_GMAGIC|SV_CONST_RETURN" to handle magic.
STRLEN sv_pos_u2b_flags(SV *const sv, STRLEN uoffset,
STRLEN *const lenp, U32 flags)
sv_pvbyten_force
The backend for the "SvPVbytex_force" macro. Always use the
macro instead.
char* sv_pvbyten_force(SV *const sv, STRLEN *const lp)
sv_pvn_force
Get a sensible string out of the SV somehow. A private
implementation of the "SvPV_force" macro for compilers which
can't cope with complex macro expressions. Always use the
macro instead.
char* sv_pvn_force(SV* sv, STRLEN* lp)
sv_pvn_force_flags
Get a sensible string out of the SV somehow. If "flags" has
"SV_GMAGIC" bit set, will "mg_get" on "sv" if appropriate, else
not. "sv_pvn_force" and "sv_pvn_force_nomg" are implemented in
terms of this function. You normally want to use the various
wrapper macros instead: see "SvPV_force" and "SvPV_force_nomg"
char* sv_pvn_force_flags(SV *const sv,
STRLEN *const lp,
const I32 flags)
sv_pvutf8n_force
The backend for the "SvPVutf8x_force" macro. Always use the
macro instead.
char* sv_pvutf8n_force(SV *const sv, STRLEN *const lp)
sv_reftype
Returns a string describing what the SV is a reference to.
const char* sv_reftype(const SV *const sv, const int ob)
sv_replace
Make the first argument a copy of the second, then delete the
original. The target SV physically takes over ownership of the
body of the source SV and inherits its flags; however, the
target keeps any magic it owns, and any magic in the source is
discarded. Note that this is a rather specialist SV copying
operation; most of the time you'll want to use "sv_setsv" or
one of its many macro front-ends.
void sv_replace(SV *const sv, SV *const nsv)
sv_reset
Underlying implementation for the "reset" Perl function. Note
that the perl-level function is vaguely deprecated.
void sv_reset(const char* s, HV *const stash)
sv_rvweaken
Weaken a reference: set the "SvWEAKREF" flag on this RV; give
the referred-to SV "PERL_MAGIC_backref" magic if it hasn't
already; and push a back-reference to this RV onto the array of
backreferences associated with that magic. If the RV is
magical, set magic will be called after the RV is cleared.
SV* sv_rvweaken(SV *const sv)
sv_setiv
Copies an integer into the given SV, upgrading first if
necessary. Does not handle 'set' magic. See also
"sv_setiv_mg".
void sv_setiv(SV *const sv, const IV num)
sv_setiv_mg
Like "sv_setiv", but also handles 'set' magic.
void sv_setiv_mg(SV *const sv, const IV i)
sv_setnv
Copies a double into the given SV, upgrading first if
necessary. Does not handle 'set' magic. See also
"sv_setnv_mg".
void sv_setnv(SV *const sv, const NV num)
sv_setnv_mg
Like "sv_setnv", but also handles 'set' magic.
void sv_setnv_mg(SV *const sv, const NV num)
sv_setpv
Copies a string into an SV. The string must be null-
terminated. Does not handle 'set' magic. See "sv_setpv_mg".
void sv_setpv(SV *const sv, const char *const ptr)
sv_setpvf
Works like "sv_catpvf" but copies the text into the SV instead
of appending it. Does not handle 'set' magic. See
"sv_setpvf_mg".
void sv_setpvf(SV *const sv, const char *const pat,
...)
sv_setpvf_mg
Like "sv_setpvf", but also handles 'set' magic.
void sv_setpvf_mg(SV *const sv,
const char *const pat, ...)
sv_setpviv
Copies an integer into the given SV, also updating its string
value. Does not handle 'set' magic. See "sv_setpviv_mg".
void sv_setpviv(SV *const sv, const IV num)
sv_setpviv_mg
Like "sv_setpviv", but also handles 'set' magic.
void sv_setpviv_mg(SV *const sv, const IV iv)
sv_setpvn
Copies a string into an SV. The "len" parameter indicates the
number of bytes to be copied. If the "ptr" argument is NULL
the SV will become undefined. Does not handle 'set' magic.
See "sv_setpvn_mg".
void sv_setpvn(SV *const sv, const char *const ptr,
const STRLEN len)
sv_setpvn_mg
Like "sv_setpvn", but also handles 'set' magic.
void sv_setpvn_mg(SV *const sv,
const char *const ptr,
const STRLEN len)
sv_setpvs
Like "sv_setpvn", but takes a literal string instead of a
string/length pair.
void sv_setpvs(SV* sv, const char* s)
sv_setpvs_mg
Like "sv_setpvn_mg", but takes a literal string instead of a
string/length pair.
void sv_setpvs_mg(SV* sv, const char* s)
sv_setpv_mg
Like "sv_setpv", but also handles 'set' magic.
void sv_setpv_mg(SV *const sv, const char *const ptr)
sv_setref_iv
Copies an integer into a new SV, optionally blessing the SV.
The "rv" argument will be upgraded to an RV. That RV will be
modified to point to the new SV. The "classname" argument
indicates the package for the blessing. Set "classname" to
"NULL" to avoid the blessing. The new SV will have a reference
count of 1, and the RV will be returned.
SV* sv_setref_iv(SV *const rv,
const char *const classname,
const IV iv)
sv_setref_nv
Copies a double into a new SV, optionally blessing the SV. The
"rv" argument will be upgraded to an RV. That RV will be
modified to point to the new SV. The "classname" argument
indicates the package for the blessing. Set "classname" to
"NULL" to avoid the blessing. The new SV will have a reference
count of 1, and the RV will be returned.
SV* sv_setref_nv(SV *const rv,
const char *const classname,
const NV nv)
sv_setref_pv
Copies a pointer into a new SV, optionally blessing the SV.
The "rv" argument will be upgraded to an RV. That RV will be
modified to point to the new SV. If the "pv" argument is NULL
then "PL_sv_undef" will be placed into the SV. The "classname"
argument indicates the package for the blessing. Set
"classname" to "NULL" to avoid the blessing. The new SV will
have a reference count of 1, and the RV will be returned.
Do not use with other Perl types such as HV, AV, SV, CV,
because those objects will become corrupted by the pointer copy
process.
Note that "sv_setref_pvn" copies the string while this copies
the pointer.
SV* sv_setref_pv(SV *const rv,
const char *const classname,
void *const pv)
sv_setref_pvn
Copies a string into a new SV, optionally blessing the SV. The
length of the string must be specified with "n". The "rv"
argument will be upgraded to an RV. That RV will be modified
to point to the new SV. The "classname" argument indicates the
package for the blessing. Set "classname" to "NULL" to avoid
the blessing. The new SV will have a reference count of 1, and
the RV will be returned.
Note that "sv_setref_pv" copies the pointer while this copies
the string.
SV* sv_setref_pvn(SV *const rv,
const char *const classname,
const char *const pv,
const STRLEN n)
sv_setref_pvs
Like "sv_setref_pvn", but takes a literal string instead of a
string/length pair.
SV * sv_setref_pvs(const char* s)
sv_setref_uv
Copies an unsigned integer into a new SV, optionally blessing
the SV. The "rv" argument will be upgraded to an RV. That RV
will be modified to point to the new SV. The "classname"
argument indicates the package for the blessing. Set
"classname" to "NULL" to avoid the blessing. The new SV will
have a reference count of 1, and the RV will be returned.
SV* sv_setref_uv(SV *const rv,
const char *const classname,
const UV uv)
sv_setsv
Copies the contents of the source SV "ssv" into the destination
SV "dsv". The source SV may be destroyed if it is mortal, so
don't use this function if the source SV needs to be reused.
Does not handle 'set' magic. Loosely speaking, it performs a
copy-by-value, obliterating any previous content of the
destination.
You probably want to use one of the assortment of wrappers,
such as "SvSetSV", "SvSetSV_nosteal", "SvSetMagicSV" and
"SvSetMagicSV_nosteal".
void sv_setsv(SV *dstr, SV *sstr)
sv_setsv_flags
Copies the contents of the source SV "ssv" into the destination
SV "dsv". The source SV may be destroyed if it is mortal, so
don't use this function if the source SV needs to be reused.
Does not handle 'set' magic. Loosely speaking, it performs a
copy-by-value, obliterating any previous content of the
destination. If the "flags" parameter has the "SV_GMAGIC" bit
set, will "mg_get" on "ssv" if appropriate, else not. If the
"flags" parameter has the "NOSTEAL" bit set then the buffers of
temps will not be stolen. <sv_setsv> and "sv_setsv_nomg" are
implemented in terms of this function.
You probably want to use one of the assortment of wrappers,
such as "SvSetSV", "SvSetSV_nosteal", "SvSetMagicSV" and
"SvSetMagicSV_nosteal".
This is the primary function for copying scalars, and most
other copy-ish functions and macros use this underneath.
void sv_setsv_flags(SV *dstr, SV *sstr,
const I32 flags)
sv_setsv_mg
Like "sv_setsv", but also handles 'set' magic.
void sv_setsv_mg(SV *const dstr, SV *const sstr)
sv_setuv
Copies an unsigned integer into the given SV, upgrading first
if necessary. Does not handle 'set' magic. See also
"sv_setuv_mg".
void sv_setuv(SV *const sv, const UV num)
sv_setuv_mg
Like "sv_setuv", but also handles 'set' magic.
void sv_setuv_mg(SV *const sv, const UV u)
sv_tainted
Test an SV for taintedness. Use "SvTAINTED" instead.
bool sv_tainted(SV *const sv)
sv_true Returns true if the SV has a true value by Perl's rules. Use
the "SvTRUE" macro instead, which may call "sv_true()" or may
instead use an in-line version.
I32 sv_true(SV *const sv)
sv_unmagic
Removes all magic of type "type" from an SV.
int sv_unmagic(SV *const sv, const int type)
sv_unmagicext
Removes all magic of type "type" with the specified "vtbl" from
an SV.
int sv_unmagicext(SV *const sv, const int type,
MGVTBL *vtbl)
sv_unref_flags
Unsets the RV status of the SV, and decrements the reference
count of whatever was being referenced by the RV. This can
almost be thought of as a reversal of "newSVrv". The "cflags"
argument can contain "SV_IMMEDIATE_UNREF" to force the
reference count to be decremented (otherwise the decrementing
is conditional on the reference count being different from one
or the reference being a readonly SV). See "SvROK_off".
void sv_unref_flags(SV *const ref, const U32 flags)
sv_untaint
Untaint an SV. Use "SvTAINTED_off" instead.
void sv_untaint(SV *const sv)
sv_upgrade
Upgrade an SV to a more complex form. Generally adds a new
body type to the SV, then copies across as much information as
possible from the old body. It croaks if the SV is already in
a more complex form than requested. You generally want to use
the "SvUPGRADE" macro wrapper, which checks the type before
calling "sv_upgrade", and hence does not croak. See also
"svtype".
void sv_upgrade(SV *const sv, svtype new_type)
sv_usepvn_flags
Tells an SV to use "ptr" to find its string value. Normally
the string is stored inside the SV but sv_usepvn allows the SV
to use an outside string. The "ptr" should point to memory
that was allocated by "malloc". It must be the start of a
mallocked block of memory, and not a pointer to the middle of
it. The string length, "len", must be supplied. By default
this function will realloc (i.e. move) the memory pointed to by
"ptr", so that pointer should not be freed or used by the
programmer after giving it to sv_usepvn, and neither should any
pointers from "behind" that pointer (e.g. ptr + 1) be used.
If "flags" & SV_SMAGIC is true, will call SvSETMAGIC. If
"flags" & SV_HAS_TRAILING_NUL is true, then "ptr[len]" must be
NUL, and the realloc will be skipped (i.e. the buffer is
actually at least 1 byte longer than "len", and already meets
the requirements for storing in "SvPVX").
void sv_usepvn_flags(SV *const sv, char* ptr,
const STRLEN len,
const U32 flags)
sv_utf8_decode
If the PV of the SV is an octet sequence in UTF-8 and contains
a multiple-byte character, the "SvUTF8" flag is turned on so
that it looks like a character. If the PV contains only
single-byte characters, the "SvUTF8" flag stays off. Scans PV
for validity and returns false if the PV is invalid UTF-8.
NOTE: this function is experimental and may change or be
removed without notice.
bool sv_utf8_decode(SV *const sv)
sv_utf8_downgrade
Attempts to convert the PV of an SV from characters to bytes.
If the PV contains a character that cannot fit in a byte, this
conversion will fail; in this case, either returns false or, if
"fail_ok" is not true, croaks.
This is not as a general purpose Unicode to byte encoding
interface: use the Encode extension for that.
NOTE: this function is experimental and may change or be
removed without notice.
bool sv_utf8_downgrade(SV *const sv,
const bool fail_ok)
sv_utf8_encode
Converts the PV of an SV to UTF-8, but then turns the "SvUTF8"
flag off so that it looks like octets again.
void sv_utf8_encode(SV *const sv)
sv_utf8_upgrade
Converts the PV of an SV to its UTF-8-encoded form. Forces the
SV to string form if it is not already. Will "mg_get" on "sv"
if appropriate. Always sets the SvUTF8 flag to avoid future
validity checks even if the whole string is the same in UTF-8
as not. Returns the number of bytes in the converted string
This is not as a general purpose byte encoding to Unicode
interface: use the Encode extension for that.
STRLEN sv_utf8_upgrade(SV *sv)
sv_utf8_upgrade_flags
Converts the PV of an SV to its UTF-8-encoded form. Forces the
SV to string form if it is not already. Always sets the SvUTF8
flag to avoid future validity checks even if all the bytes are
invariant in UTF-8. If "flags" has "SV_GMAGIC" bit set, will
"mg_get" on "sv" if appropriate, else not. Returns the number
of bytes in the converted string "sv_utf8_upgrade" and
"sv_utf8_upgrade_nomg" are implemented in terms of this
function.
This is not as a general purpose byte encoding to Unicode
interface: use the Encode extension for that.
STRLEN sv_utf8_upgrade_flags(SV *const sv,
const I32 flags)
sv_utf8_upgrade_nomg
Like sv_utf8_upgrade, but doesn't do magic on "sv".
STRLEN sv_utf8_upgrade_nomg(SV *sv)
sv_vcatpvf
Processes its arguments like "vsprintf" and appends the
formatted output to an SV. Does not handle 'set' magic. See
"sv_vcatpvf_mg".
Usually used via its frontend "sv_catpvf".
void sv_vcatpvf(SV *const sv, const char *const pat,
va_list *const args)
sv_vcatpvfn
Processes its arguments like "vsprintf" and appends the
formatted output to an SV. Uses an array of SVs if the C style
variable argument list is missing (NULL). When running with
taint checks enabled, indicates via "maybe_tainted" if results
are untrustworthy (often due to the use of locales).
Usually used via one of its frontends "sv_vcatpvf" and
"sv_vcatpvf_mg".
void sv_vcatpvfn(SV *const sv, const char *const pat,
const STRLEN patlen,
va_list *const args,
SV **const svargs, const I32 svmax,
bool *const maybe_tainted)
sv_vcatpvf_mg
Like "sv_vcatpvf", but also handles 'set' magic.
Usually used via its frontend "sv_catpvf_mg".
void sv_vcatpvf_mg(SV *const sv,
const char *const pat,
va_list *const args)
sv_vsetpvf
Works like "sv_vcatpvf" but copies the text into the SV instead
of appending it. Does not handle 'set' magic. See
"sv_vsetpvf_mg".
Usually used via its frontend "sv_setpvf".
void sv_vsetpvf(SV *const sv, const char *const pat,
va_list *const args)
sv_vsetpvfn
Works like "sv_vcatpvfn" but copies the text into the SV
instead of appending it.
Usually used via one of its frontends "sv_vsetpvf" and
"sv_vsetpvf_mg".
void sv_vsetpvfn(SV *const sv, const char *const pat,
const STRLEN patlen,
va_list *const args,
SV **const svargs, const I32 svmax,
bool *const maybe_tainted)
sv_vsetpvf_mg
Like "sv_vsetpvf", but also handles 'set' magic.
Usually used via its frontend "sv_setpvf_mg".
void sv_vsetpvf_mg(SV *const sv,
const char *const pat,
va_list *const args)
Unicode Support
bytes_cmp_utf8
Compares the sequence of characters (stored as octets) in "b",
"blen" with the sequence of characters (stored as UTF-8) in
"u", "ulen". Returns 0 if they are equal, -1 or -2 if the first
string is less than the second string, +1 or +2 if the first
string is greater than the second string.
-1 or +1 is returned if the shorter string was identical to the
start of the longer string. -2 or +2 is returned if the was a
difference between characters within the strings.
int bytes_cmp_utf8(const U8 *b, STRLEN blen,
const U8 *u, STRLEN ulen)
bytes_from_utf8
Converts a string "s" of length "len" from UTF-8 into native
byte encoding. Unlike "utf8_to_bytes" but like
"bytes_to_utf8", returns a pointer to the newly-created string,
and updates "len" to contain the new length. Returns the
original string if no conversion occurs, "len" is unchanged. Do
nothing if "is_utf8" points to 0. Sets "is_utf8" to 0 if "s" is
converted or consisted entirely of characters that are
invariant in utf8 (i.e., US-ASCII on non-EBCDIC machines).
NOTE: this function is experimental and may change or be
removed without notice.
U8* bytes_from_utf8(const U8 *s, STRLEN *len,
bool *is_utf8)
bytes_to_utf8
Converts a string "s" of length "len" bytes from the native
encoding into UTF-8. Returns a pointer to the newly-created
string, and sets "len" to reflect the new length in bytes.
A NUL character will be written after the end of the string.
If you want to convert to UTF-8 from encodings other than the
native (Latin1 or EBCDIC), see "sv_recode_to_utf8"().
NOTE: this function is experimental and may change or be
removed without notice.
U8* bytes_to_utf8(const U8 *s, STRLEN *len)
foldEQ_utf8
Returns true if the leading portions of the strings "s1" and
"s2" (either or both of which may be in UTF-8) are the same
case-insensitively; false otherwise. How far into the strings
to compare is determined by other input parameters.
If "u1" is true, the string "s1" is assumed to be in
UTF-8-encoded Unicode; otherwise it is assumed to be in native
8-bit encoding. Correspondingly for "u2" with respect to "s2".
If the byte length "l1" is non-zero, it says how far into "s1"
to check for fold equality. In other words, "s1"+"l1" will be
used as a goal to reach. The scan will not be considered to be
a match unless the goal is reached, and scanning won't continue
past that goal. Correspondingly for "l2" with respect to "s2".
If "pe1" is non-NULL and the pointer it points to is not NULL,
that pointer is considered an end pointer beyond which scanning
of "s1" will not continue under any circumstances. This means
that if both "l1" and "pe1" are specified, and "pe1" is less
than "s1"+"l1", the match will never be successful because it
can never get as far as its goal (and in fact is asserted
against). Correspondingly for "pe2" with respect to "s2".
At least one of "s1" and "s2" must have a goal (at least one of
"l1" and "l2" must be non-zero), and if both do, both have to
be reached for a successful match. Also, if the fold of a
character is multiple characters, all of them must be matched
(see tr21 reference below for 'folding').
Upon a successful match, if "pe1" is non-NULL, it will be set
to point to the beginning of the next character of "s1" beyond
what was matched. Correspondingly for "pe2" and "s2".
For case-insensitiveness, the "casefolding" of Unicode is used
instead of upper/lowercasing both the characters, see
<http://www.unicode.org/unicode/reports/tr21/>; (Case Mappings).
I32 foldEQ_utf8(const char *s1, char **pe1, UV l1,
bool u1, const char *s2, char **pe2,
UV l2, bool u2)
is_ascii_string
Returns true if the first "len" bytes of the string "s" are the
same whether or not the string is encoded in UTF-8 (or UTF-
EBCDIC on EBCDIC machines). That is, if they are invariant.
On ASCII-ish machines, only ASCII characters fit this
definition, hence the function's name.
If "len" is 0, it will be calculated using strlen(s).
See also "is_utf8_string"(), "is_utf8_string_loclen"(), and
"is_utf8_string_loc"().
bool is_ascii_string(const U8 *s, STRLEN len)
is_utf8_char
DEPRECATED!
Tests if some arbitrary number of bytes begins in a valid UTF-8
character. Note that an INVARIANT (i.e. ASCII on non-EBCDIC
machines) character is a valid UTF-8 character. The actual
number of bytes in the UTF-8 character will be returned if it
is valid, otherwise 0.
This function is deprecated due to the possibility that
malformed input could cause reading beyond the end of the input
buffer. Use "is_utf8_char_buf" instead.
STRLEN is_utf8_char(const U8 *s)
is_utf8_char_buf
Returns the number of bytes that comprise the first UTF-8
encoded character in buffer "buf". "buf_end" should point to
one position beyond the end of the buffer. 0 is returned if
"buf" does not point to a complete, valid UTF-8 encoded
character.
Note that an INVARIANT character (i.e. ASCII on non-EBCDIC
machines) is a valid UTF-8 character.
STRLEN is_utf8_char_buf(const U8 *buf,
const U8 *buf_end)
is_utf8_string
Returns true if the first "len" bytes of string "s" form a
valid UTF-8 string, false otherwise. If "len" is 0, it will be
calculated using strlen(s) (which means if you use this option,
that "s" has to have a terminating NUL byte). Note that all
characters being ASCII constitute 'a valid UTF-8 string'.
See also "is_ascii_string"(), "is_utf8_string_loclen"(), and
"is_utf8_string_loc"().
bool is_utf8_string(const U8 *s, STRLEN len)
is_utf8_string_loc
Like "is_utf8_string" but stores the location of the failure
(in the case of "utf8ness failure") or the location "s"+"len"
(in the case of "utf8ness success") in the "ep".
See also "is_utf8_string_loclen"() and "is_utf8_string"().
bool is_utf8_string_loc(const U8 *s, STRLEN len,
const U8 **p)
is_utf8_string_loclen
Like "is_utf8_string"() but stores the location of the failure
(in the case of "utf8ness failure") or the location "s"+"len"
(in the case of "utf8ness success") in the "ep", and the number
of UTF-8 encoded characters in the "el".
See also "is_utf8_string_loc"() and "is_utf8_string"().
bool is_utf8_string_loclen(const U8 *s, STRLEN len,
const U8 **ep, STRLEN *el)
pv_uni_display
Build to the scalar "dsv" a displayable version of the string
"spv", length "len", the displayable version being at most
"pvlim" bytes long (if longer, the rest is truncated and "..."
will be appended).
The "flags" argument can have UNI_DISPLAY_ISPRINT set to
display isPRINT()able characters as themselves,
UNI_DISPLAY_BACKSLASH to display the \\[nrfta\\] as the
backslashed versions (like '\n') (UNI_DISPLAY_BACKSLASH is
preferred over UNI_DISPLAY_ISPRINT for \\). UNI_DISPLAY_QQ
(and its alias UNI_DISPLAY_REGEX) have both
UNI_DISPLAY_BACKSLASH and UNI_DISPLAY_ISPRINT turned on.
The pointer to the PV of the "dsv" is returned.
char* pv_uni_display(SV *dsv, const U8 *spv,
STRLEN len, STRLEN pvlim,
UV flags)
sv_cat_decode
The encoding is assumed to be an Encode object, the PV of the
ssv is assumed to be octets in that encoding and decoding the
input starts from the position which (PV + *offset) pointed to.
The dsv will be concatenated the decoded UTF-8 string from ssv.
Decoding will terminate when the string tstr appears in
decoding output or the input ends on the PV of the ssv. The
value which the offset points will be modified to the last
input position on the ssv.
Returns TRUE if the terminator was found, else returns FALSE.
bool sv_cat_decode(SV* dsv, SV *encoding, SV *ssv,
int *offset, char* tstr, int tlen)
sv_recode_to_utf8
The encoding is assumed to be an Encode object, on entry the PV
of the sv is assumed to be octets in that encoding, and the sv
will be converted into Unicode (and UTF-8).
If the sv already is UTF-8 (or if it is not POK), or if the
encoding is not a reference, nothing is done to the sv. If the
encoding is not an "Encode::XS" Encoding object, bad things
will happen. (See lib/encoding.pm and Encode.)
The PV of the sv is returned.
char* sv_recode_to_utf8(SV* sv, SV *encoding)
sv_uni_display
Build to the scalar "dsv" a displayable version of the scalar
"sv", the displayable version being at most "pvlim" bytes long
(if longer, the rest is truncated and "..." will be appended).
The "flags" argument is as in "pv_uni_display"().
The pointer to the PV of the "dsv" is returned.
char* sv_uni_display(SV *dsv, SV *ssv, STRLEN pvlim,
UV flags)
to_utf8_case
The "p" contains the pointer to the UTF-8 string encoding the
character that is being converted. This routine assumes that
the character at "p" is well-formed.
The "ustrp" is a pointer to the character buffer to put the
conversion result to. The "lenp" is a pointer to the length of
the result.
The "swashp" is a pointer to the swash to use.
Both the special and normal mappings are stored in
lib/unicore/To/Foo.pl, and loaded by SWASHNEW, using
lib/utf8_heavy.pl. The "special" (usually, but not always, a
multicharacter mapping), is tried first.
The "special" is a string like "utf8::ToSpecLower", which means
the hash %utf8::ToSpecLower. The access to the hash is through
Perl_to_utf8_case().
The "normal" is a string like "ToLower" which means the swash
%utf8::ToLower.
UV to_utf8_case(const U8 *p, U8* ustrp,
STRLEN *lenp, SV **swashp,
const char *normal,
const char *special)
to_utf8_fold
Convert the UTF-8 encoded character at "p" to its foldcase
version and store that in UTF-8 in "ustrp" and its length in
bytes in "lenp". Note that the "ustrp" needs to be at least
UTF8_MAXBYTES_CASE+1 bytes since the foldcase version may be
longer than the original character (up to three characters).
The first character of the foldcased version is returned (but
note, as explained above, that there may be more.)
The character at "p" is assumed by this routine to be well-
formed.
UV to_utf8_fold(const U8 *p, U8* ustrp,
STRLEN *lenp)
to_utf8_lower
Convert the UTF-8 encoded character at "p" to its lowercase
version and store that in UTF-8 in ustrp and its length in
bytes in "lenp". Note that the "ustrp" needs to be at least
UTF8_MAXBYTES_CASE+1 bytes since the lowercase version may be
longer than the original character.
The first character of the lowercased version is returned (but
note, as explained above, that there may be more.)
The character at "p" is assumed by this routine to be well-
formed.
UV to_utf8_lower(const U8 *p, U8* ustrp,
STRLEN *lenp)
to_utf8_title
Convert the UTF-8 encoded character at "p" to its titlecase
version and store that in UTF-8 in "ustrp" and its length in
bytes in "lenp". Note that the "ustrp" needs to be at least
UTF8_MAXBYTES_CASE+1 bytes since the titlecase version may be
longer than the original character.
The first character of the titlecased version is returned (but
note, as explained above, that there may be more.)
The character at "p" is assumed by this routine to be well-
formed.
UV to_utf8_title(const U8 *p, U8* ustrp,
STRLEN *lenp)
to_utf8_upper
Convert the UTF-8 encoded character at "p" to its uppercase
version and store that in UTF-8 in "ustrp" and its length in
bytes in "lenp". Note that the ustrp needs to be at least
UTF8_MAXBYTES_CASE+1 bytes since the uppercase version may be
longer than the original character.
The first character of the uppercased version is returned (but
note, as explained above, that there may be more.)
The character at "p" is assumed by this routine to be well-
formed.
UV to_utf8_upper(const U8 *p, U8* ustrp,
STRLEN *lenp)
utf8n_to_uvchr
Returns the native character value of the first character in
the string "s" which is assumed to be in UTF-8 encoding;
"retlen" will be set to the length, in bytes, of that
character.
"length" and "flags" are the same as "utf8n_to_uvuni"().
UV utf8n_to_uvchr(const U8 *s, STRLEN curlen,
STRLEN *retlen, U32 flags)
utf8n_to_uvuni
Bottom level UTF-8 decode routine. Returns the code point
value of the first character in the string "s", which is
assumed to be in UTF-8 (or UTF-EBCDIC) encoding, and no longer
than "curlen" bytes; *retlen (if "retlen" isn't NULL) will be
set to the length, in bytes, of that character.
The value of "flags" determines the behavior when "s" does not
point to a well-formed UTF-8 character. If "flags" is 0, when
a malformation is found, zero is returned and *retlen is set so
that ("s" + *retlen) is the next possible position in "s" that
could begin a non-malformed character. Also, if UTF-8 warnings
haven't been lexically disabled, a warning is raised.
Various ALLOW flags can be set in "flags" to allow (and not
warn on) individual types of malformations, such as the
sequence being overlong (that is, when there is a shorter
sequence that can express the same code point; overlong
sequences are expressly forbidden in the UTF-8 standard due to
potential security issues). Another malformation example is
the first byte of a character not being a legal first byte.
See utf8.h for the list of such flags. For allowed 0 length
strings, this function returns 0; for allowed overlong
sequences, the computed code point is returned; for all other
allowed malformations, the Unicode REPLACEMENT CHARACTER is
returned, as these have no determinable reasonable value.
The UTF8_CHECK_ONLY flag overrides the behavior when a non-
allowed (by other flags) malformation is found. If this flag
is set, the routine assumes that the caller will raise a
warning, and this function will silently just set "retlen" to
"-1" and return zero.
Certain code points are considered problematic. These are
Unicode surrogates, Unicode non-characters, and code points
above the Unicode maximum of 0x10FFFF. By default these are
considered regular code points, but certain situations warrant
special handling for them. If "flags" contains
UTF8_DISALLOW_ILLEGAL_INTERCHANGE, all three classes are
treated as malformations and handled as such. The flags
UTF8_DISALLOW_SURROGATE, UTF8_DISALLOW_NONCHAR, and
UTF8_DISALLOW_SUPER (meaning above the legal Unicode maximum)
can be set to disallow these categories individually.
The flags UTF8_WARN_ILLEGAL_INTERCHANGE, UTF8_WARN_SURROGATE,
UTF8_WARN_NONCHAR, and UTF8_WARN_SUPER will cause warning
messages to be raised for their respective categories, but
otherwise the code points are considered valid (not
malformations). To get a category to both be treated as a
malformation and raise a warning, specify both the WARN and
DISALLOW flags. (But note that warnings are not raised if
lexically disabled nor if UTF8_CHECK_ONLY is also specified.)
Very large code points (above 0x7FFF_FFFF) are considered more
problematic than the others that are above the Unicode legal
maximum. There are several reasons: they requre at least 32
bits to represent them on ASCII platforms, are not
representable at all on EBCDIC platforms, and the original
UTF-8 specification never went above this number (the current
0x10FFFF limit was imposed later). (The smaller ones, those
that fit into 32 bits, are representable by a UV on ASCII
platforms, but not by an IV, which means that the number of
operations that can be performed on them is quite restricted.)
The UTF-8 encoding on ASCII platforms for these large code
points begins with a byte containing 0xFE or 0xFF. The
UTF8_DISALLOW_FE_FF flag will cause them to be treated as
malformations, while allowing smaller above-Unicode code
points. (Of course UTF8_DISALLOW_SUPER will treat all above-
Unicode code points, including these, as malformations.)
Similarly, UTF8_WARN_FE_FF acts just like the other WARN flags,
but applies just to these code points.
All other code points corresponding to Unicode characters,
including private use and those yet to be assigned, are never
considered malformed and never warn.
Most code should use "utf8_to_uvchr_buf"() rather than call
this directly.
UV utf8n_to_uvuni(const U8 *s, STRLEN curlen,
STRLEN *retlen, U32 flags)
utf8_distance
Returns the number of UTF-8 characters between the UTF-8
pointers "a" and "b".
WARNING: use only if you *know* that the pointers point inside
the same UTF-8 buffer.
IV utf8_distance(const U8 *a, const U8 *b)
utf8_hop
Return the UTF-8 pointer "s" displaced by "off" characters,
either forward or backward.
WARNING: do not use the following unless you *know* "off" is
within the UTF-8 data pointed to by "s" *and* that on entry "s"
is aligned on the first byte of character or just after the
last byte of a character.
U8* utf8_hop(const U8 *s, I32 off)
utf8_length
Return the length of the UTF-8 char encoded string "s" in
characters. Stops at "e" (inclusive). If "e < s" or if the
scan would end up past "e", croaks.
STRLEN utf8_length(const U8* s, const U8 *e)
utf8_to_bytes
Converts a string "s" of length "len" from UTF-8 into native
byte encoding. Unlike "bytes_to_utf8", this over-writes the
original string, and updates "len" to contain the new length.
Returns zero on failure, setting "len" to -1.
If you need a copy of the string, see "bytes_from_utf8".
NOTE: this function is experimental and may change or be
removed without notice.
U8* utf8_to_bytes(U8 *s, STRLEN *len)
utf8_to_uvchr
DEPRECATED!
Returns the native code point of the first character in the
string "s" which is assumed to be in UTF-8 encoding; "retlen"
will be set to the length, in bytes, of that character.
Some, but not all, UTF-8 malformations are detected, and in
fact, some malformed input could cause reading beyond the end
of the input buffer, which is why this function is deprecated.
Use "utf8_to_uvchr_buf" instead.
If "s" points to one of the detected malformations, and UTF8
warnings are enabled, zero is returned and *retlen is set (if
"retlen" isn't NULL) to -1. If those warnings are off, the
computed value if well-defined (or the Unicode REPLACEMENT
CHARACTER, if not) is silently returned, and *retlen is set (if
"retlen" isn't NULL) so that ("s" + *retlen) is the next
possible position in "s" that could begin a non-malformed
character. See "utf8n_to_uvuni" for details on when the
REPLACEMENT CHARACTER is returned.
UV utf8_to_uvchr(const U8 *s, STRLEN *retlen)
utf8_to_uvchr_buf
Returns the native code point of the first character in the
string "s" which is assumed to be in UTF-8 encoding; "send"
points to 1 beyond the end of "s". *retlen will be set to the
length, in bytes, of that character.
If "s" does not point to a well-formed UTF-8 character and UTF8
warnings are enabled, zero is returned and *retlen is set (if
"retlen" isn't NULL) to -1. If those warnings are off, the
computed value if well-defined (or the Unicode REPLACEMENT
CHARACTER, if not) is silently returned, and *retlen is set (if
"retlen" isn't NULL) so that ("s" + *retlen) is the next
possible position in "s" that could begin a non-malformed
character. See "utf8n_to_uvuni" for details on when the
REPLACEMENT CHARACTER is returned.
UV utf8_to_uvchr_buf(const U8 *s, const U8 *send,
STRLEN *retlen)
utf8_to_uvuni
DEPRECATED!
Returns the Unicode code point of the first character in the
string "s" which is assumed to be in UTF-8 encoding; "retlen"
will be set to the length, in bytes, of that character.
This function should only be used when the returned UV is
considered an index into the Unicode semantic tables (e.g.
swashes).
Some, but not all, UTF-8 malformations are detected, and in
fact, some malformed input could cause reading beyond the end
of the input buffer, which is why this function is deprecated.
Use "utf8_to_uvuni_buf" instead.
If "s" points to one of the detected malformations, and UTF8
warnings are enabled, zero is returned and *retlen is set (if
"retlen" doesn't point to NULL) to -1. If those warnings are
off, the computed value if well-defined (or the Unicode
REPLACEMENT CHARACTER, if not) is silently returned, and
*retlen is set (if "retlen" isn't NULL) so that ("s" + *retlen)
is the next possible position in "s" that could begin a non-
malformed character. See "utf8n_to_uvuni" for details on when
the REPLACEMENT CHARACTER is returned.
UV utf8_to_uvuni(const U8 *s, STRLEN *retlen)
utf8_to_uvuni_buf
Returns the Unicode code point of the first character in the
string "s" which is assumed to be in UTF-8 encoding; "send"
points to 1 beyond the end of "s". "retlen" will be set to the
length, in bytes, of that character.
This function should only be used when the returned UV is
considered an index into the Unicode semantic tables (e.g.
swashes).
If "s" does not point to a well-formed UTF-8 character and UTF8
warnings are enabled, zero is returned and *retlen is set (if
"retlen" isn't NULL) to -1. If those warnings are off, the
computed value if well-defined (or the Unicode REPLACEMENT
CHARACTER, if not) is silently returned, and *retlen is set (if
"retlen" isn't NULL) so that ("s" + *retlen) is the next
possible position in "s" that could begin a non-malformed
character. See "utf8n_to_uvuni" for details on when the
REPLACEMENT CHARACTER is returned.
UV utf8_to_uvuni_buf(const U8 *s, const U8 *send,
STRLEN *retlen)
uvchr_to_utf8
Adds the UTF-8 representation of the Native code point "uv" to
the end of the string "d"; "d" should have at least
"UTF8_MAXBYTES+1" free bytes available. The return value is the
pointer to the byte after the end of the new character. In
other words,
d = uvchr_to_utf8(d, uv);
is the recommended wide native character-aware way of saying
*(d++) = uv;
U8* uvchr_to_utf8(U8 *d, UV uv)
uvuni_to_utf8_flags
Adds the UTF-8 representation of the code point "uv" to the end
of the string "d"; "d" should have at least "UTF8_MAXBYTES+1"
free bytes available. The return value is the pointer to the
byte after the end of the new character. In other words,
d = uvuni_to_utf8_flags(d, uv, flags);
or, in most cases,
d = uvuni_to_utf8(d, uv);
(which is equivalent to)
d = uvuni_to_utf8_flags(d, uv, 0);
This is the recommended Unicode-aware way of saying
*(d++) = uv;
This function will convert to UTF-8 (and not warn) even code
points that aren't legal Unicode or are problematic, unless
"flags" contains one or more of the following flags:
If "uv" is a Unicode surrogate code point and
UNICODE_WARN_SURROGATE is set, the function will raise a
warning, provided UTF8 warnings are enabled. If instead
UNICODE_DISALLOW_SURROGATE is set, the function will fail and
return NULL. If both flags are set, the function will both
warn and return NULL.
The UNICODE_WARN_NONCHAR and UNICODE_DISALLOW_NONCHAR flags
correspondingly affect how the function handles a Unicode non-
character. And, likewise for the UNICODE_WARN_SUPER and
UNICODE_DISALLOW_SUPER flags, and code points that are above
the Unicode maximum of 0x10FFFF. Code points above 0x7FFF_FFFF
(which are even less portable) can be warned and/or disallowed
even if other above-Unicode code points are accepted by the
UNICODE_WARN_FE_FF and UNICODE_DISALLOW_FE_FF flags.
And finally, the flag UNICODE_WARN_ILLEGAL_INTERCHANGE selects
all four of the above WARN flags; and
UNICODE_DISALLOW_ILLEGAL_INTERCHANGE selects all four DISALLOW
flags.
U8* uvuni_to_utf8_flags(U8 *d, UV uv, UV flags)
Variables created by "xsubpp" and "xsubpp" internal functions
ax Variable which is setup by "xsubpp" to indicate the stack base
offset, used by the "ST", "XSprePUSH" and "XSRETURN" macros.
The "dMARK" macro must be called prior to setup the "MARK"
variable.
I32 ax
CLASS Variable which is setup by "xsubpp" to indicate the class name
for a C++ XS constructor. This is always a "char*". See
"THIS".
char* CLASS
dAX Sets up the "ax" variable. This is usually handled
automatically by "xsubpp" by calling "dXSARGS".
dAX;
dAXMARK Sets up the "ax" variable and stack marker variable "mark".
This is usually handled automatically by "xsubpp" by calling
"dXSARGS".
dAXMARK;
dITEMS Sets up the "items" variable. This is usually handled
automatically by "xsubpp" by calling "dXSARGS".
dITEMS;
dUNDERBAR
Sets up any variable needed by the "UNDERBAR" macro. It used to
define "padoff_du", but it is currently a noop. However, it is
strongly advised to still use it for ensuring past and future
compatibility.
dUNDERBAR;
dXSARGS Sets up stack and mark pointers for an XSUB, calling dSP and
dMARK. Sets up the "ax" and "items" variables by calling "dAX"
and "dITEMS". This is usually handled automatically by
"xsubpp".
dXSARGS;
dXSI32 Sets up the "ix" variable for an XSUB which has aliases. This
is usually handled automatically by "xsubpp".
dXSI32;
items Variable which is setup by "xsubpp" to indicate the number of
items on the stack. See "Variable-length Parameter Lists" in
perlxs.
I32 items
ix Variable which is setup by "xsubpp" to indicate which of an
XSUB's aliases was used to invoke it. See "The ALIAS: Keyword"
in perlxs.
I32 ix
newXSproto
Used by "xsubpp" to hook up XSUBs as Perl subs. Adds Perl
prototypes to the subs.
RETVAL Variable which is setup by "xsubpp" to hold the return value
for an XSUB. This is always the proper type for the XSUB. See
"The RETVAL Variable" in perlxs.
(whatever) RETVAL
ST Used to access elements on the XSUB's stack.
SV* ST(int ix)
THIS Variable which is setup by "xsubpp" to designate the object in
a C++ XSUB. This is always the proper type for the C++ object.
See "CLASS" and "Using XS With C++" in perlxs.
(whatever) THIS
UNDERBAR
The SV* corresponding to the $_ variable. Works even if there
is a lexical $_ in scope.
XS Macro to declare an XSUB and its C parameter list. This is
handled by "xsubpp". It is the same as using the more explicit
XS_EXTERNAL macro.
XS_APIVERSION_BOOTCHECK
Macro to verify that the perl api version an XS module has been
compiled against matches the api version of the perl
interpreter it's being loaded into.
XS_APIVERSION_BOOTCHECK;
XS_EXTERNAL
Macro to declare an XSUB and its C parameter list explicitly
exporting the symbols.
XS_INTERNAL
Macro to declare an XSUB and its C parameter list without
exporting the symbols. This is handled by "xsubpp" and
generally preferable over exporting the XSUB symbols
unnecessarily.
XS_VERSION
The version identifier for an XS module. This is usually
handled automatically by "ExtUtils::MakeMaker". See
"XS_VERSION_BOOTCHECK".
XS_VERSION_BOOTCHECK
Macro to verify that a PM module's $VERSION variable matches
the XS module's "XS_VERSION" variable. This is usually handled
automatically by "xsubpp". See "The VERSIONCHECK: Keyword" in
perlxs.
XS_VERSION_BOOTCHECK;
Warning and Dieing
croak This is an XS interface to Perl's "die" function.
Take a sprintf-style format pattern and argument list. These
are used to generate a string message. If the message does not
end with a newline, then it will be extended with some
indication of the current location in the code, as described
for "mess_sv".
The error message will be used as an exception, by default
returning control to the nearest enclosing "eval", but subject
to modification by a $SIG{__DIE__} handler. In any case, the
"croak" function never returns normally.
For historical reasons, if "pat" is null then the contents of
"ERRSV" ($@) will be used as an error message or object instead
of building an error message from arguments. If you want to
throw a non-string object, or build an error message in an SV
yourself, it is preferable to use the "croak_sv" function,
which does not involve clobbering "ERRSV".
void croak(const char *pat, ...)
croak_no_modify
Exactly equivalent to "Perl_croak(aTHX_ "%s", PL_no_modify)",
but generates terser object code than using "Perl_croak". Less
code used on exception code paths reduces CPU cache pressure.
void croak_no_modify()
croak_sv
This is an XS interface to Perl's "die" function.
"baseex" is the error message or object. If it is a reference,
it will be used as-is. Otherwise it is used as a string, and
if it does not end with a newline then it will be extended with
some indication of the current location in the code, as
described for "mess_sv".
The error message or object will be used as an exception, by
default returning control to the nearest enclosing "eval", but
subject to modification by a $SIG{__DIE__} handler. In any
case, the "croak_sv" function never returns normally.
To die with a simple string message, the "croak" function may
be more convenient.
void croak_sv(SV *baseex)
die Behaves the same as "croak", except for the return type. It
should be used only where the "OP *" return type is required.
The function never actually returns.
OP * die(const char *pat, ...)
die_sv Behaves the same as "croak_sv", except for the return type. It
should be used only where the "OP *" return type is required.
The function never actually returns.
OP * die_sv(SV *baseex)
vcroak This is an XS interface to Perl's "die" function.
"pat" and "args" are a sprintf-style format pattern and
encapsulated argument list. These are used to generate a
string message. If the message does not end with a newline,
then it will be extended with some indication of the current
location in the code, as described for "mess_sv".
The error message will be used as an exception, by default
returning control to the nearest enclosing "eval", but subject
to modification by a $SIG{__DIE__} handler. In any case, the
"croak" function never returns normally.
For historical reasons, if "pat" is null then the contents of
"ERRSV" ($@) will be used as an error message or object instead
of building an error message from arguments. If you want to
throw a non-string object, or build an error message in an SV
yourself, it is preferable to use the "croak_sv" function,
which does not involve clobbering "ERRSV".
void vcroak(const char *pat, va_list *args)
vwarn This is an XS interface to Perl's "warn" function.
"pat" and "args" are a sprintf-style format pattern and
encapsulated argument list. These are used to generate a
string message. If the message does not end with a newline,
then it will be extended with some indication of the current
location in the code, as described for "mess_sv".
The error message or object will by default be written to
standard error, but this is subject to modification by a
$SIG{__WARN__} handler.
Unlike with "vcroak", "pat" is not permitted to be null.
void vwarn(const char *pat, va_list *args)
warn This is an XS interface to Perl's "warn" function.
Take a sprintf-style format pattern and argument list. These
are used to generate a string message. If the message does not
end with a newline, then it will be extended with some
indication of the current location in the code, as described
for "mess_sv".
The error message or object will by default be written to
standard error, but this is subject to modification by a
$SIG{__WARN__} handler.
Unlike with "croak", "pat" is not permitted to be null.
void warn(const char *pat, ...)
warn_sv This is an XS interface to Perl's "warn" function.
"baseex" is the error message or object. If it is a reference,
it will be used as-is. Otherwise it is used as a string, and
if it does not end with a newline then it will be extended with
some indication of the current location in the code, as
described for "mess_sv".
The error message or object will by default be written to
standard error, but this is subject to modification by a
$SIG{__WARN__} handler.
To warn with a simple string message, the "warn" function may
be more convenient.
void warn_sv(SV *baseex)
Undocumented functions
The following functions have been flagged as part of the public API,
but are currently undocumented. Use them at your own risk, as the
interfaces are subject to change.
If you use one of them, you may wish to consider creating and
submitting documentation for it. If your patch is accepted, this will
indicate that the interface is stable (unless it is explicitly marked
otherwise).
GetVars
Gv_AMupdate
PerlIO_clearerr
PerlIO_close
PerlIO_context_layers
PerlIO_eof
PerlIO_error
PerlIO_fileno
PerlIO_fill
PerlIO_flush
PerlIO_get_base
PerlIO_get_bufsiz
PerlIO_get_cnt
PerlIO_get_ptr
PerlIO_read
PerlIO_seek
PerlIO_set_cnt
PerlIO_set_ptrcnt
PerlIO_setlinebuf
PerlIO_stderr
PerlIO_stdin
PerlIO_stdout
PerlIO_tell
PerlIO_unread
PerlIO_write
Slab_Alloc
Slab_Free
_is_utf8_quotemeta
amagic_call
amagic_deref_call
any_dup
atfork_lock
atfork_unlock
av_arylen_p
av_iter_p
block_gimme
call_atexit
call_list
calloc
cast_i32
cast_iv
cast_ulong
cast_uv
ck_warner
ck_warner_d
ckwarn
ckwarn_d
clone_params_del
clone_params_new
croak_nocontext
csighandler
cx_dump
cx_dup
cxinc
deb
deb_nocontext
debop
debprofdump
debstack
debstackptrs
delimcpy
despatch_signals
die_nocontext
dirp_dup
do_aspawn
do_binmode
do_close
do_gv_dump
do_gvgv_dump
do_hv_dump
do_join
do_magic_dump
do_op_dump
do_open
do_open9
do_openn
do_pmop_dump
do_spawn
do_spawn_nowait
do_sprintf
do_sv_dump
doing_taint
doref
dounwind
dowantarray
dump_all
dump_eval
dump_fds
dump_form
dump_indent
dump_mstats
dump_packsubs
dump_sub
dump_vindent
filter_add
filter_del
filter_read
foldEQ_latin1
form_nocontext
fp_dup
fprintf_nocontext
free_global_struct
free_tmps
get_context
get_mstats
get_op_descs
get_op_names
get_ppaddr
get_vtbl
gp_dup
gp_free
gp_ref
gv_AVadd
gv_HVadd
gv_IOadd
gv_SVadd
gv_add_by_type
gv_autoload4
gv_autoload_pv
gv_autoload_pvn
gv_autoload_sv
gv_check
gv_dump
gv_efullname
gv_efullname3
gv_efullname4
gv_fetchfile
gv_fetchfile_flags
gv_fetchpv
gv_fetchpvn_flags
gv_fetchsv
gv_fullname
gv_fullname3
gv_fullname4
gv_handler
gv_name_set
he_dup
hek_dup
hv_common
hv_common_key_len
hv_delayfree_ent
hv_eiter_p
hv_eiter_set
hv_free_ent
hv_ksplit
hv_name_set
hv_placeholders_get
hv_placeholders_p
hv_placeholders_set
hv_riter_p
hv_riter_set
init_global_struct
init_i18nl10n
init_i18nl14n
init_stacks
init_tm
instr
is_lvalue_sub
is_uni_alnum
is_uni_alnum_lc
is_uni_alpha
is_uni_alpha_lc
is_uni_ascii
is_uni_ascii_lc
is_uni_cntrl
is_uni_cntrl_lc
is_uni_digit
is_uni_digit_lc
is_uni_graph
is_uni_graph_lc
is_uni_idfirst
is_uni_idfirst_lc
is_uni_lower
is_uni_lower_lc
is_uni_print
is_uni_print_lc
is_uni_punct
is_uni_punct_lc
is_uni_space
is_uni_space_lc
is_uni_upper
is_uni_upper_lc
is_uni_xdigit
is_uni_xdigit_lc
is_utf8_alnum
is_utf8_alpha
is_utf8_ascii
is_utf8_cntrl
is_utf8_digit
is_utf8_graph
is_utf8_idcont
is_utf8_idfirst
is_utf8_lower
is_utf8_mark
is_utf8_perl_space
is_utf8_perl_word
is_utf8_posix_digit
is_utf8_print
is_utf8_punct
is_utf8_space
is_utf8_upper
is_utf8_xdigit
is_utf8_xidcont
is_utf8_xidfirst
leave_scope
load_module_nocontext
magic_dump
malloc
markstack_grow
mess_nocontext
mfree
mg_dup
mg_size
mini_mktime
moreswitches
mro_get_from_name
mro_get_private_data
mro_set_mro
mro_set_private_data
my_atof
my_atof2
my_bcopy
my_bzero
my_chsize
my_cxt_index
my_cxt_init
my_dirfd
my_exit
my_failure_exit
my_fflush_all
my_fork
my_htonl
my_lstat
my_memcmp
my_memset
my_ntohl
my_pclose
my_popen
my_popen_list
my_setenv
my_socketpair
my_stat
my_strftime
my_strlcat
my_strlcpy
my_swap
newANONATTRSUB
newANONHASH
newANONLIST
newANONSUB
newATTRSUB
newAVREF
newCVREF
newFORM
newGVREF
newGVgen
newGVgen_flags
newHVREF
newHVhv
newIO
newMYSUB
newPROG
newRV
newSUB
newSVREF
newSVpvf_nocontext
new_collate
new_ctype
new_numeric
new_stackinfo
ninstr
op_dump
op_free
op_null
op_refcnt_lock
op_refcnt_unlock
parser_dup
perl_alloc_using
perl_clone_using
pmop_dump
pop_scope
pregcomp
pregexec
pregfree
pregfree2
printf_nocontext
ptr_table_clear
ptr_table_fetch
ptr_table_free
ptr_table_new
ptr_table_split
ptr_table_store
push_scope
re_compile
re_dup_guts
re_intuit_start
re_intuit_string
realloc
reentrant_free
reentrant_init
reentrant_retry
reentrant_size
ref
reg_named_buff_all
reg_named_buff_exists
reg_named_buff_fetch
reg_named_buff_firstkey
reg_named_buff_nextkey
reg_named_buff_scalar
regclass_swash
regdump
regdupe_internal
regexec_flags
regfree_internal
reginitcolors
regnext
repeatcpy
rninstr
rsignal
rsignal_state
runops_debug
runops_standard
rvpv_dup
safesyscalloc
safesysfree
safesysmalloc
safesysrealloc
save_I16
save_I32
save_I8
save_adelete
save_aelem
save_aelem_flags
save_alloc
save_aptr
save_ary
save_bool
save_clearsv
save_delete
save_destructor
save_destructor_x
save_freeop
save_freepv
save_freesv
save_generic_pvref
save_generic_svref
save_gp
save_hash
save_hdelete
save_helem
save_helem_flags
save_hints
save_hptr
save_int
save_item
save_iv
save_list
save_long
save_mortalizesv
save_nogv
save_op
save_padsv_and_mortalize
save_pptr
save_pushi32ptr
save_pushptr
save_pushptrptr
save_re_context
save_scalar
save_set_svflags
save_shared_pvref
save_sptr
save_svref
save_vptr
savestack_grow
savestack_grow_cnt
scan_num
scan_vstring
screaminstr
seed
set_context
set_numeric_local
set_numeric_radix
set_numeric_standard
share_hek
si_dup
ss_dup
stack_grow
start_subparse
stashpv_hvname_match
str_to_version
sv_2iv
sv_2pv
sv_2uv
sv_catpvf_mg_nocontext
sv_catpvf_nocontext
sv_compile_2op
sv_dump
sv_dup
sv_dup_inc
sv_peek
sv_pvn_nomg
sv_setpvf_mg_nocontext
sv_setpvf_nocontext
sv_utf8_upgrade_flags_grow
swash_fetch
swash_init
sys_init
sys_init3
sys_intern_clear
sys_intern_dup
sys_intern_init
sys_term
taint_env
taint_proper
tmps_grow
to_uni_fold
to_uni_lower
to_uni_lower_lc
to_uni_title
to_uni_title_lc
to_uni_upper
to_uni_upper_lc
unlnk
unsharepvn
utf16_to_utf8
utf16_to_utf8_reversed
uvchr_to_utf8_flags
uvuni_to_utf8
vdeb
vform
vload_module
vnewSVpvf
vwarner
warn_nocontext
warner
warner_nocontext
whichsig
whichsig_pv
whichsig_pvn
whichsig_sv
AUTHORS
Until May 1997, this document was maintained by Jeff Okamoto
<okamoto AT corp.com>. It is now maintained as part of Perl itself.
With lots of help and suggestions from Dean Roehrich, Malcolm Beattie,
Andreas Koenig, Paul Hudson, Ilya Zakharevich, Paul Marquess, Neil
Bowers, Matthew Green, Tim Bunce, Spider Boardman, Ulrich Pfeifer,
Stephen McCamant, and Gurusamy Sarathy.
API Listing originally by Dean Roehrich <roehrich AT cray.com>.
Updated to be autogenerated from comments in the source by Benjamin
Stuhl.
SEE ALSO
perlguts, perlxs, perlxstut, perlintern
perl v5.16.3 2023-10-25 PERLAPI(1)
Linux-Distributionen
Huschi als Linux-Admin