openssl.cnf(category32-phpmyadmin.html) - phpMan

CONFIG(5)                           OpenSSL                          CONFIG(5)

NAME
       config - OpenSSL CONF library configuration files
DESCRIPTION
       The OpenSSL CONF library can be used to read configuration files.  It
       is used for the OpenSSL master configuration file openssl.cnf and in a
       few other places like SPKAC files and certificate extension files for
       the x509 utility. OpenSSL applications can also use the CONF library
       for their own purposes.
       A configuration file is divided into a number of sections. Each section
       starts with a line [ section_name ] and ends when a new section is
       started or end of file is reached. A section name can consist of
       alphanumeric characters and underscores.
       The first section of a configuration file is special and is referred to
       as the default section this is usually unnamed and is from the start of
       file until the first named section. When a name is being looked up it
       is first looked up in a named section (if any) and then the default
       section.
       The environment is mapped onto a section called ENV.
       Comments can be included by preceding them with the # character
       Each section in a configuration file consists of a number of name and
       value pairs of the form name=value
       The name string can contain any alphanumeric characters as well as a
       few punctuation symbols such as . , ; and _.
       The value string consists of the string following the = character until
       end of line with any leading and trailing white space removed.
       The value string undergoes variable expansion. This can be done by
       including the form $var or ${var}: this will substitute the value of
       the named variable in the current section. It is also possible to
       substitute a value from another section using the syntax $section::name
       or ${section::name}. By using the form $ENV::name environment variables
       can be substituted. It is also possible to assign values to environment
       variables by using the name ENV::name, this will work if the program
       looks up environment variables using the CONF library instead of
       calling getenv() directly.
       It is possible to escape certain characters by using any kind of quote
       or the \ character. By making the last character of a line a \ a value
       string can be spread across multiple lines. In addition the sequences
       \n, \r, \b and \t are recognized.
OPENSSL LIBRARY CONFIGURATION
       In OpenSSL 0.9.7 and later applications can automatically configure
       certain aspects of OpenSSL using the master OpenSSL configuration file,
       or optionally an alternative configuration file. The openssl utility
       includes this functionality: any sub command uses the master OpenSSL
       configuration file unless an option is used in the sub command to use
       an alternative configuration file.
       To enable library configuration the default section needs to contain an
       appropriate line which points to the main configuration section. The
       default name is openssl_conf which is used by the openssl utility.
       Other applications may use an alternative name such as
       myapplicaton_conf.
       The configuration section should consist of a set of name value pairs
       which contain specific module configuration information. The name
       represents the name of the configuration module the meaning of the
       value is module specific: it may, for example, represent a further
       configuration section containing configuration module specific
       information. E.g.
        openssl_conf = openssl_init
        [openssl_init]
        oid_section = new_oids
        engines = engine_section
        [new_oids]
        ... new oids here ...
        [engine_section]
        ... engine stuff here ...
       The features of each configuration module are described below.
   ASN1 OBJECT CONFIGURATION MODULE
       This module has the name oid_section. The value of this variable points
       to a section containing name value pairs of OIDs: the name is the OID
       short and long name, the value is the numerical form of the OID.
       Although some of the openssl utility sub commands already have their
       own ASN1 OBJECT section functionality not all do. By using the ASN1
       OBJECT configuration module all the openssl utility sub commands can
       see the new objects as well as any compliant applications. For example:
        [new_oids]
        some_new_oid = 1.2.3.4
        some_other_oid = 1.2.3.5
       In OpenSSL 0.9.8 it is also possible to set the value to the long name
       followed by a comma and the numerical OID form. For example:
        shortName = some object long name, 1.2.3.4
   ENGINE CONFIGURATION MODULE
       This ENGINE configuration module has the name engines. The value of
       this variable points to a section containing further ENGINE
       configuration information.
       The section pointed to by engines is a table of engine names (though
       see engine_id below) and further sections containing configuration
       information specific to each ENGINE.
       Each ENGINE specific section is used to set default algorithms, load
       dynamic, perform initialization and send ctrls. The actual operation
       performed depends on the command name which is the name of the name
       value pair. The currently supported commands are listed below.
       For example:
        [engine_section]
        # Configure ENGINE named "foo"
        foo = foo_section
        # Configure ENGINE named "bar"
        bar = bar_section
        [foo_section]
        ... foo ENGINE specific commands ...
        [bar_section]
        ... "bar" ENGINE specific commands ...
       The command engine_id is used to give the ENGINE name. If used this
       command must be first. For example:
        [engine_section]
        # This would normally handle an ENGINE named "foo"
        foo = foo_section
        [foo_section]
        # Override default name and use "myfoo" instead.
        engine_id = myfoo
       The command dynamic_path loads and adds an ENGINE from the given path.
       It is equivalent to sending the ctrls SO_PATH with the path argument
       followed by LIST_ADD with value 2 and LOAD to the dynamic ENGINE. If
       this is not the required behaviour then alternative ctrls can be sent
       directly to the dynamic ENGINE using ctrl commands.
       The command init determines whether to initialize the ENGINE. If the
       value is 0 the ENGINE will not be initialized, if 1 and attempt it made
       to initialized the ENGINE immediately. If the init command is not
       present then an attempt will be made to initialize the ENGINE after all
       commands in its section have been processed.
       The command default_algorithms sets the default algorithms an ENGINE
       will supply using the functions ENGINE_set_default_string()
       If the name matches none of the above command names it is assumed to be
       a ctrl command which is sent to the ENGINE. The value of the command is
       the argument to the ctrl command. If the value is the string EMPTY then
       no value is sent to the command.
       For example:
        [engine_section]
        # Configure ENGINE named "foo"
        foo = foo_section
        [foo_section]
        # Load engine from DSO
        dynamic_path = /some/path/fooengine.so
        # A foo specific ctrl.
        some_ctrl = some_value
        # Another ctrl that doesn't take a value.
        other_ctrl = EMPTY
        # Supply all default algorithms
        default_algorithms = ALL
   EVP CONFIGURATION MODULE
       This modules has the name alg_section which points to a section
       containing algorithm commands.
       Currently the only algorithm command supported is fips_mode whose value
       should be a boolean string such as on or off. If the value is on this
       attempt to enter FIPS mode. If the call fails or the library is not
       FIPS capable then an error occurs.
       For example:
        alg_section = evp_settings
        [evp_settings]
        fips_mode = on
NOTES
       If a configuration file attempts to expand a variable that doesn't
       exist then an error is flagged and the file will not load. This can
       happen if an attempt is made to expand an environment variable that
       doesn't exist. For example in a previous version of OpenSSL the default
       OpenSSL master configuration file used the value of HOME which may not
       be defined on non Unix systems and would cause an error.
       This can be worked around by including a default section to provide a
       default value: then if the environment lookup fails the default value
       will be used instead. For this to work properly the default value must
       be defined earlier in the configuration file than the expansion. See
       the EXAMPLES section for an example of how to do this.
       If the same variable exists in the same section then all but the last
       value will be silently ignored. In certain circumstances such as with
       DNs the same field may occur multiple times. This is usually worked
       around by ignoring any characters before an initial . e.g.
        1.OU="My first OU"
        2.OU="My Second OU"
EXAMPLES
       Here is a sample configuration file using some of the features
       mentioned above.
        # This is the default section.
        HOME=/temp
        RANDFILE= ${ENV::HOME}/.rnd
        configdir=$ENV::HOME/config
        [ section_one ]
        # We are now in section one.
        # Quotes permit leading and trailing whitespace
        any = " any variable name "
        other = A string that can \
        cover several lines \
        by including \\ characters
        message = Hello World\n
        [ section_two ]
        greeting = $section_one::message
       This next example shows how to expand environment variables safely.
       Suppose you want a variable called tmpfile to refer to a temporary
       filename. The directory it is placed in can determined by the the TEMP
       or TMP environment variables but they may not be set to any value at
       all. If you just include the environment variable names and the
       variable doesn't exist then this will cause an error when an attempt is
       made to load the configuration file. By making use of the default
       section both values can be looked up with TEMP taking priority and /tmp
       used if neither is defined:
        TMP=/tmp
        # The above value is used if TMP isn't in the environment
        TEMP=$ENV::TMP
        # The above value is used if TEMP isn't in the environment
        tmpfile=${ENV::TEMP}/tmp.filename
       Simple OpenSSL library configuration example to enter FIPS mode:
        # Default appname: should match "appname" parameter (if any)
        # supplied to CONF_modules_load_file et al.
        openssl_conf = openssl_conf_section
        [openssl_conf_section]
        # Configuration module list
        alg_section = evp_sect
        [evp_sect]
        # Set to "yes" to enter FIPS mode if supported
        fips_mode = yes
       Note: in the above example you will get an error in non FIPS capable
       versions of OpenSSL.
       More complex OpenSSL library configuration. Add OID and don't enter
       FIPS mode:
        # Default appname: should match "appname" parameter (if any)
        # supplied to CONF_modules_load_file et al.
        openssl_conf = openssl_conf_section
        [openssl_conf_section]
        # Configuration module list
        alg_section = evp_sect
        oid_section = new_oids
        [evp_sect]
        # This will have no effect as FIPS mode is off by default.
        # Set to "yes" to enter FIPS mode, if supported
        fips_mode = no
        [new_oids]
        # New OID, just short name
        newoid1 = 1.2.3.4.1
        # New OID shortname and long name
        newoid2 = New OID 2 long name, 1.2.3.4.2
       The above examples can be used with with any application supporting
       library configuration if "openssl_conf" is modified to match the
       appropriate "appname".
       For example if the second sample file above is saved to "example.cnf"
       then the command line:
        OPENSSL_CONF=example.cnf openssl asn1parse -genstr OID:1.2.3.4.1
       will output:
           0:d=0  hl=2 l=   4 prim: OBJECT            :newoid1
       showing that the OID "newoid1" has been added as "1.2.3.4.1".
BUGS
       Currently there is no way to include characters using the octal \nnn
       form. Strings are all null terminated so nulls cannot form part of the
       value.
       The escaping isn't quite right: if you want to use sequences like \n
       you can't use any quote escaping on the same line.
       Files are loaded in a single pass. This means that an variable
       expansion will only work if the variables referenced are defined
       earlier in the file.
SEE ALSO
       x509(1), req(1), ca(1)

1.0.2k                            2017-01-26                         CONFIG(5)