LVM(FULLREPORT) Red Hat, Inc. LVM(FULLREPORT)
NAME
lvm fullreport -- Display full report
SYNOPSIS
lvm fullreport
[ option_args ]
[ position_args ]
DESCRIPTION
lvm fullreport produces formatted output about PVs, PV segments, VGs,
LVs and LV segments. The information is all gathered together for each
VG (under a per-VG lock) so it is consistent. Information gathered from
separate calls to vgs, pvs, and lvs can be inconsistent if information
changes between commands.
USAGE
lvm fullreport
[ -a|--all ]
[ -o|--options String ]
[ -S|--select String ]
[ -O|--sort String ]
[ --aligned ]
[ --binary ]
[ --configreport log|vg|lv|pv|pvseg|seg ]
[ --foreign ]
[ --ignorelockingfailure ]
[ --logonly ]
[ --nameprefixes ]
[ --noheadings ]
[ --nosuffix ]
[ --readonly ]
[ --reportformat basic|json ]
[ --rows ]
[ --separator String ]
[ --shared ]
[ --unbuffered ]
[ --units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E ]
[ --unquoted ]
[ COMMON_OPTIONS ]
[ VG ... ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--aligned
Use with --separator to align the output columns
-a|--all
--binary
Use binary values "0" or "1" instead of descriptive literal val-
ues for columns that have exactly two valid values to report
(not counting the "unknown" value which denotes that the value
could not be determined).
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) set-
tings. The String arg uses the same format as lvm.conf(5), or
may use section/field syntax. See lvm.conf(5) for more informa-
tion about config.
--configreport log|vg|lv|pv|pvseg|seg
See lvmreport(7).
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail
of messages sent to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the
command. Devices not listed will appear to be missing. This op-
tion can be repeated, or accepts a comma separated list of de-
vices. This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist
in /etc/lvm/devices/ and is managed with the lvmdevices(8) com-
mand. This overrides the lvm.conf(5) devices/devicesfile and
devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
--foreign
Report/display foreign VGs that would otherwise be skipped. See
lvmsystemid(7) for more information about foreign VGs.
-h|--help
Display help text.
--ignorelockingfailure
Allows a command to continue with read-only metadata operations
after locking failures.
--journal String
Record information in the systemd journal. This information is
in addition to information enabled by the lvm.conf log/journal
setting. command: record information about the command. out-
put: record the default command output. debug: record full com-
mand debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvm-
lockd(8) for more information.
--logonly
Suppress command report and display only log report.
--longhelp
Display long help text.
--nameprefixes
Add an "LVM2_" prefix plus the field name to the output. Useful
with --noheadings to produce a list of field=value pairs that
can be used to set environment variables (for example, in udev
rules).
--noheadings
Suppress the headings line that is normally the first line of
output. Useful if grepping the output.
--nohints
Do not use the hints file to locate devices for PVs. A command
may read more devices to find PVs when hints are not used. The
command will still perform standard hint file invalidation where
appropriate.
--nolocking
Disable locking.
--nosuffix
Suppress the suffix on output sizes. Use with --units (except h
and H) if processing the output.
-o|--options String
Comma-separated, ordered list of fields to display in columns.
String arg syntax is: [+|-|#]Field1[,Field2 ...] The prefix +
will append the specified fields to the default fields, - will
remove the specified fields from the default fields, and # will
compact specified fields (removing them when empty for all
rows.) Use -o help to view the list of all available fields.
Use separate lists of fields to add, remove or compact by re-
peating the -o option: -o+field1,field2 -o-field3,field4
-o#field5. These lists are evaluated from left to right. Use
field name lv_all to view all LV fields, vg_all all VG fields,
pv_all all PV fields, pvseg_all all PV segment fields, seg_all
all LV segment fields, and pvseg_all all PV segment columns.
See the lvm.conf(5) report section for more config options. See
lvmreport(7) for more information about reporting.
--profile String
An alias for --commandprofile or --metadataprofile, depending on
the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --ver-
bose. Repeat once to also suppress any prompts with answer
'no'.
--readonly
Run the command in a special read-only mode which will read on-
disk metadata without needing to take any locks. This can be
used to peek inside metadata used by a virtual machine image
while the virtual machine is running. No attempt will be made to
communicate with the device-mapper kernel driver, so this option
is unable to report whether or not LVs are actually in use.
--reportformat basic|json
Overrides current output format for reports which is defined
globally by the report/output_format setting in lvm.conf(5).
basic is the original format with columns and rows. If there is
more than one report per command, each report is prefixed with
the report name for identification. json produces report output
in JSON format. See lvmreport(7) for more information.
--rows
Output columns as rows.
-S|--select String
Select objects for processing and reporting based on specified
criteria. The criteria syntax is described by --select help and
lvmreport(7). For reporting commands, one row is displayed for
each object matching the criteria. See --options help for se-
lectable object fields. Rows can be displayed with an addition-
al "selected" field (-o selected) showing 1 if the row matches
the selection and 0 otherwise. For non-reporting commands which
process LVM entities, the selection is used to choose items to
process.
--separator String
String to use to separate each column. Useful if grepping the
output.
--shared
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host. See lvmlockd(8) for
more information about shared VGs.
-O|--sort String
Comma-separated ordered list of columns to sort by. Replaces the
default selection. Precede any column with - for a reverse sort
on that column.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to un-
usual error messages in multi-stage operations if a tool relies
on reading back metadata it believes has changed but hasn't.
--unbuffered
Produce output immediately without sorting or aligning the col-
umns properly.
--units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
All sizes are output in these units: human-(r)eadable with '<'
rounding indicator, (h)uman-readable, (b)ytes, (s)ectors,
(k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes, (p)etabytes,
(e)xabytes. Capitalise to use multiples of 1000 (S.I.) instead
of 1024. Custom units can be specified, e.g. --units 3M.
--unquoted
When used with --nameprefixes, output values in the field=value
pairs are not quoted.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the de-
tail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
VARIABLES
VG Volume Group name. See lvm(8) for valid names.
String See the option description for information about the string con-
tent.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of capi-
talization, e.g. 'k' and 'K' both refer to 1024. The default
input unit is specified by letter, followed by |UNIT. UNIT rep-
resents other possible input units: b|B is bytes, s|S is sectors
of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB,
p|P is PiB, e|E is EiB. (This should not be confused with the
output control --units, where capital letters mean multiple of
1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG
parameter.
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), lvm2-activation-generator(8),
blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)
LVM TOOLS 2.03.14(2)-RHEL8 (2021-10-20)8 LVM(FULLREPORT)
Linux-Distributionen
Huschi als Linux-Admin