KDUMP.CONF(5) File Formats Manual KDUMP.CONF(5)
NAME
kdump.conf - configuration file for kdump kernel.
DESCRIPTION
kdump.conf is a configuration file for the kdump kernel crash collec-
tion service.
kdump.conf provides post-kexec instructions to the kdump kernel. It is
stored in the initrd file managed by the kdump service. If you change
this file and do not want to reboot in order for the changes to take
effect, restart the kdump service to rebuild the initrd.
For most configurations, you can simply review the examples provided in
the stock /etc/kdump.conf.
NOTE: For filesystem dumps the dump target must be mounted before
building kdump initramfs.
kdump.conf only affects the behavior of the initramfs. Please read the
kdump operational flow section of kexec-kdump-howto.txt in the docs to
better understand how this configuration file affects the behavior of
kdump.
OPTIONS
raw <partition>
Will dd /proc/vmcore into <partition>. Use persistent device
names for partition devices, such as /dev/vg/<devname>.
nfs <nfs mount>
Will mount nfs to <mnt>, and copy /proc/vmcore to
<mnt>/<path>/%HOST-%DATE/, supports DNS. Note that a fqdn should
be used as the server name in the mount point.
ssh <user@server>
Will scp /proc/vmcore to <user@server>:<path>/%HOST-%DATE/, sup-
ports DNS. NOTE: make sure user has necessary write permissions
on server and that a fqdn is used as the server name.
sshkey <path>
Specify the path of the ssh key to use when dumping via ssh.
The default value is /root/.ssh/kdump_id_rsa.
<fs type> <partition>
Will mount -t <fs type> <partition> <mnt>, and copy /proc/vmcore
to <mnt>/<path>/%HOST_IP-%DATE/. NOTE: <partition> can be a
device node, label or uuid. It's recommended to use persistent
device names such as /dev/vg/<devname>. Otherwise it's sug-
gested to use label or uuid.
path <path>
"path" represents the file system path in which vmcore will be
saved. If a dump target is specified in kdump.conf, then "path"
is relative to the specified dump target.
Interpretation of "path" changes a bit if the user didn't spec-
ify any dump target explicitly in kdump.conf. In this case,
"path" represents the absolute path from root. The dump target
and adjusted path are arrived at automatically depending on
what's mounted in the current system.
Ignored for raw device dumps. If unset, will use the default
"/var/crash".
core_collector <command> <options>
This allows you to specify the command to copy the vmcore. The
default is makedumpfile, which on some architectures can drasti-
cally reduce core file size. See /sbin/makedumpfile --help for a
list of options. Note that the -i and -g options are not needed
here, as the initrd will automatically be populated with a con-
fig file appropriate for the running kernel.
Note 1: About default core collector: The default core_collector
for raw/ssh dump is: "makedumpfile -F -l --message-level 1 -d
31". The default core_collector for other targets is: "make-
dumpfile -l --message-level 1 -d 31". Even if core_collector
option is commented out in kdump.conf, makedumpfile is the
default core collector and kdump uses it internally. If one
does not want makedumpfile as default core_collector, then they
need to specify one using core_collector option to change the
behavior.
Note 2: If "makedumpfile -F" is used then you will get a flat-
tened format vmcore.flat, you will need to use "makedumpfile -R"
to rearrange the dump data from standard input to a normal dump-
file (readable with analysis tools). ie. "makedumpfile -R
vmcore < vmcore.flat"
kdump_post <binary | script>
This directive allows you to run a specified executable just
after the vmcore dump process terminates. The exit status of
the current dump process is fed to the kdump_post executable as
its first argument($1). Executable can modify it to indicate
the new exit status of succeeding dump process,
Note that scripts written for use with this directive must use
the /bin/bash interpreter.
kdump_pre <binary | script>
Works just like the "kdump_post" directive, but instead of run-
ning after the dump process, runs immediately before. Exit sta-
tus of this binary is interpreted as follows:
0 - continue with dump process as usual
non 0 - reboot the system
Note that scripts written for this directive must use the
/bin/bash interpreter.
extra_bins <binaries | shell scripts>
This directive allows you to specify additional binaries or
shell scripts you'd like to include in your kdump initrd. Gener-
ally only useful in conjunction with a kdump_post binary or
script that relies on other binaries or scripts.
extra_modules <module(s)>
This directive allows you to specify extra kernel modules that
you want to be loaded in the kdump initrd, typically used to set
up access to non-boot-path dump targets that might otherwise not
be accessible in the kdump environment. Multiple modules can be
listed, separated by spaces, and any dependent modules will
automatically be included.
default <reboot | halt | poweroff | shell | dump_to_rootfs>
Action to perform in case dumping to the intended target fails.
The default is "reboot". reboot: Reboot the system (this is
what most people will want, as it returns the system to a normal
state). halt: Halt the system and lose the vmcore. poweroff:
The system will be powered down. shell: Drop to a shell session
inside the initramfs, from which you can manually perform addi-
tional recovery actions. Exiting this shell reboots the system.
Note: kdump uses bash as the default shell. dump_to_rootfs: If
non-root dump target is specified, the default action can be set
as dump_to_rootfs. That means when dumping to target fails,
dump vmcore to rootfs from initramfs context and reboot.
force_rebuild <0 | 1>
By default, kdump initrd will only be rebuilt when necessary.
Specify 1 to force rebuilding kdump initrd every time when kdump
service starts.
force_no_rebuild <0 | 1>
By default, kdump initrd will be rebuilt when necessary. Spec-
ify 1 to bypass rebuilding of kdump initrd.
force_no_rebuild and force_rebuild options are mutually exclu-
sive and they should not be set to 1 simultaneously.
override_resettable <0 | 1>
Usually an unresettable block device can't be a dump target.
Specifying 1 means that even though the block target is unreset-
table, the user wants to try dumping anyway. By default, it's
set to 0, which will not try something destined to fail.
dracut_args <arg(s)>
Kdump uses dracut to generate initramfs for second kernel. This
option allows a user to pass arguments to dracut directly.
fence_kdump_args <arg(s)>
Command line arguments for fence_kdump_send (it can contain all
valid arguments except hosts to send notification to).
fence_kdump_nodes <node(s)>
List of cluster node(s) except localhost, separated by spaces,
to send fence_kdump notification to (this option is mandatory to
enable fence_kdump).
DEPRECATED OPTIONS
net <nfs mount>|<user@server>
net option is replaced by nfs and ssh options. Use nfs or ssh
options directly.
options <module> <option list>
Use KDUMP_COMMANDLINE_APPEND in /etc/sysconfig/kdump to add mod-
ule options as kernel command line parameters. For example,
specify 'loop.max_loop=1' to limit maximum loop devices to 1.
link_delay <seconds>
link_delay was used to wait for a network device to initialize
before using it. Now dracut network module takes care of this
issue automatically.
disk_timeout <seconds>
Similar to link_delay, dracut ensures disks are ready before
kdump uses them.
debug_mem_level <0-3>
Turn on verbose debug output of kdump scripts regarding
free/used memory at various points of execution. This feature
has been moved to dracut now. Use KDUMP_COMMANDLINE_APPEND in
/etc/sysconfig/kdump and append dracut cmdline param rd.memde-
bug=[0-3] to enable the debug output.
Higher level means more debugging output.
0 - no output
1 - partial /proc/meminfo
2 - /proc/meminfo
3 - /proc/meminfo + /proc/slabinfo
blacklist <list of kernel modules>
blacklist option was recently being used to prevent loading mod-
ules in initramfs. General terminology for blacklist has been
that module is present in initramfs but it is not actually
loaded in kernel. Hence retaining blacklist option creates more
confusing behavior. It has been deprecated.
Instead, use rd.driver.blacklist option on second kernel to
blacklist a certain module. One can edit /etc/sysconfig/kdump
and edit KDUMP_COMMANDLINE_APPEND to pass kernel command line
options. Refer to dracut.cmdline man page for more details on
module blacklist option.
EXAMPLES
Here are some examples for core_collector option:
Core collector command format depends on dump target type. Typically
for filesystem (local/remote), core_collector should accept two argu-
ments. First one is source file and second one is target file. For ex.
ex1. core_collector "cp --sparse=always"
Above will effectively be translated to:
cp --sparse=always /proc/vmcore <dest-path>/vmcore
ex2. core_collector "makedumpfile -l --message-level 1 -d 31"
Above will effectively be translated to:
makedumpfile -l --message-level 1 -d 31 /proc/vmcore <dest-
path>/vmcore
For dump targets like raw and ssh, in general, core collector should
expect one argument (source file) and should output the processed core
on standard output (There is one exception of "scp", discussed later).
This standard output will be saved to destination using appropriate
commands.
raw dumps examples:
ex3. core_collector "cat"
Above will effectively be translated to.
cat /proc/vmcore | dd of=<target-device>
ex4. core_collector "makedumpfile -F -l --message-level 1 -d 31"
Above will effectively be translated to.
makedumpfile -F -l --message-level 1 -d 31 | dd of=<target-
device>
ssh dumps examples
ex5. core_collector "cat"
Above will effectively be translated to.
cat /proc/vmcore | ssh <options> <remote-location> "dd
of=path/vmcore"
ex6. core_collector "makedumpfile -F -l --message-level 1 -d 31"
Above will effectively be translated to.
makedumpfile -F -l --message-level 1 -d 31 | ssh <options>
<remote-location> "dd of=path/vmcore"
There is one exception to standard output rule for ssh dumps.
And that is scp. As scp can handle ssh destinations for file
transfers, one can specify "scp" as core collector for ssh tar-
gets (no output on stdout).
ex7. core_collector "scp"
Above will effectively be translated to.
scp /proc/vmcore <user@host>:path/vmcore
examples for other options please see /etc/kdump.conf
SEE ALSO
kexec(8) mkdumprd(8) dracut.cmdline(7)
kexec-tools 07/23/2008 KDUMP.CONF(5)
Linux-Distributionen
Huschi als Linux-Admin