ip-xfrm(category28-ispconfig.html) - phpMan

IP-XFRM(8)                           Linux                          IP-XFRM(8)

NAME
       ip-xfrm - transform configuration
SYNOPSIS
       ip [ OPTIONS ] xfrm  { COMMAND | help }

       ip xfrm XFRM-OBJECT { COMMAND | help }

       XFRM-OBJECT := state | policy | monitor

       ip xfrm state { add | update } ID [ ALGO-LIST ] [ mode MODE ] [ mark
               MARK [ mask MASK ] ] [ reqid REQID ] [ seq SEQ ] [ replay-win-
               dow SIZE ] [ replay-seq SEQ ] [ replay-oseq SEQ ] [ replay-seq-
               hi SEQ ] [ replay-oseq-hi SEQ ] [ flag FLAG-LIST ] [ sel SELEC-
               TOR ] [ LIMIT-LIST ] [ encap ENCAP ] [ coa ADDR[/PLEN] ] [ ctx
               CTX ] [ extra-flag EXTRA-FLAG-LIST ]
       ip xfrm state allocspi ID [ mode MODE ] [ mark MARK [ mask MASK ] ] [
               reqid REQID ] [ seq SEQ ] [ min SPI max SPI ]
       ip xfrm state { delete | get } ID [ mark MARK [ mask MASK ] ]
       ip xfrm state { deleteall | list } [ ID ] [ mode MODE ] [ reqid REQID ]
               [ flag FLAG-LIST ]
       ip xfrm state flush [ proto XFRM-PROTO ]
       ip xfrm state count
       ID := [ src ADDR ] [ dst ADDR ] [ proto XFRM-PROTO ] [ spi SPI ]
       XFRM-PROTO := esp | ah | comp | route2 | hao
       ALGO-LIST := [ ALGO-LIST ] ALGO
       ALGO := { enc | auth } ALGO-NAME ALGO-KEYMAT |
               auth-trunc ALGO-NAME ALGO-KEYMAT ALGO-TRUNC-LEN |
               aead ALGO-NAME ALGO-KEYMAT ALGO-ICV-LEN |
               comp ALGO-NAME
       MODE := transport | tunnel | beet | ro | in_trigger
       FLAG-LIST := [ FLAG-LIST ] FLAG
       FLAG := noecn | decap-dscp | nopmtudisc | wildrecv | icmp | af-unspec |
               align4 | esn
       SELECTOR := [ src ADDR[/PLEN] ] [ dst ADDR[/PLEN] ] [ dev DEV ]
               [ UPSPEC ]
       UPSPEC := proto { PROTO |
               { tcp | udp | sctp | dccp } [ sport PORT ] [ dport PORT ] |
               { icmp | ipv6-icmp | mobility-header } [ type NUMBER ] [ code
               NUMBER ] |
               gre [ key { DOTTED-QUAD | NUMBER } ] }
       LIMIT-LIST := [ LIMIT-LIST ] limit LIMIT
       LIMIT := { time-soft | time-hard | time-use-soft | time-use-hard } SEC-
               ONDS |
               { byte-soft | byte-hard } SIZE |
               { packet-soft | packet-hard } COUNT
       ENCAP := { espinudp | espinudp-nonike } SPORT DPORT OADDR
       EXTRA-FLAG-LIST := [ EXTRA-FLAG-LIST ] EXTRA-FLAG
       EXTRA-FLAG := dont-encap-dscp
       ip xfrm policy { add | update } SELECTOR dir DIR [ ctx CTX ] [ mark
               MARK [ mask MASK ] ] [ index INDEX ] [ ptype PTYPE ] [ action
               ACTION ] [ priority PRIORITY ] [ flag FLAG-LIST ] [ LIMIT-LIST
               ] [ TMPL-LIST ]
       ip xfrm policy { delete | get } { SELECTOR | index INDEX } dir DIR [
               ctx CTX ] [ mark MARK [ mask MASK ] ] [ ptype PTYPE ]
       ip xfrm policy { deleteall | list } [ SELECTOR ] [ dir DIR ] [ index
               INDEX ] [ ptype PTYPE ] [ action ACTION ] [ priority PRIORITY ]
               [ flag FLAG-LIST]
       ip xfrm policy flush [ ptype PTYPE ]
       ip xfrm policy count
       ip xfrm policy set [ hthresh4 LBITS RBITS ] [ hthresh6 LBITS RBITS ]
       SELECTOR := [ src ADDR[/PLEN] ] [ dst ADDR[/PLEN] ] [ dev DEV ] [
               UPSPEC ]
       UPSPEC := proto { PROTO |
               { tcp | udp | sctp | dccp } [ sport PORT ] [ dport PORT ] |
               { icmp | ipv6-icmp | mobility-header } [ type NUMBER ] [ code
               NUMBER ] |
               gre [ key { DOTTED-QUAD | NUMBER } ] }
       DIR := in | out | fwd
       PTYPE := main | sub
       ACTION := allow | block
       FLAG-LIST := [ FLAG-LIST ] FLAG
       FLAG := localok | icmp
       LIMIT-LIST := [ LIMIT-LIST ] limit LIMIT
       LIMIT := { time-soft | time-hard | time-use-soft | time-use-hard } SEC-
               ONDS |
               { byte-soft | byte-hard } SIZE |
               { packet-soft | packet-hard } COUNT
       TMPL-LIST := [ TMPL-LIST ] tmpl TMPL
       TMPL := ID [ mode MODE ] [ reqid REQID ] [ level LEVEL ]
       ID := [ src ADDR ] [ dst ADDR ] [ proto XFRM-PROTO ] [ spi SPI ]
       XFRM-PROTO := esp | ah | comp | route2 | hao
       MODE := transport | tunnel | beet | ro | in_trigger
       LEVEL := required | use
       ip xfrm monitor [ all-nsid ] [ all
                | LISTofXFRM-OBJECTS ]
       LISTofXFRM-OBJECTS := [ LISTofXFRM-OBJECTS ] XFRM-OBJECT
       XFRM-OBJECT := acquire | expire | SA | policy | aevent | report

DESCRIPTION
       xfrm is an IP framework for transforming packets  (such  as  encrypting
       their payloads). This framework is used to implement the IPsec protocol
       suite (with the state object  operating  on  the  Security  Association
       Database,  and the policy object operating on the Security Policy Data-
       base). It is also used for the IP Payload Compression Protocol and fea-
       tures of Mobile IPv6.

       ip xfrm state add         add new state into xfrm
       ip xfrm state update      update existing state in xfrm
       ip xfrm state allocspi    allocate an SPI value
       ip xfrm state delete      delete existing state in xfrm
       ip xfrm state get         get existing state in xfrm
       ip xfrm state deleteall   delete all existing state in xfrm
       ip xfrm state list        print out the list of existing state in xfrm
       ip xfrm state flush       flush all state in xfrm
       ip xfrm state count       count all existing state in xfrm

       ID     is specified by a source address, destination address, transform
              protocol XFRM-PROTO, and/or Security Parameter Index SPI.   (For
              IP  Payload  Compression, the Compression Parameter Index or CPI
              is used for SPI.)

       XFRM-PROTO
              specifies a transform  protocol:  IPsec  Encapsulating  Security
              Payload (esp), IPsec Authentication Header (ah), IP Payload Com-
              pression (comp), Mobile IPv6 Type 2 Routing Header (route2),  or
              Mobile IPv6 Home Address Option (hao).

       ALGO-LIST
              contains  one  or more algorithms to use. Each algorithm ALGO is
              specified by:
              o      the  algorithm  type:  encryption  (enc),  authentication
                     (auth or auth-trunc), authenticated encryption with asso-
                     ciated data (aead), or compression (comp)
              o      the algorithm name ALGO-NAME (see below)
              o      (for all except comp) the  keying  material  ALGO-KEYMAT,
                     which  may  include both a key and a salt or nonce value;
                     refer to the corresponding RFC
              o      (for auth-trunc only) the truncation  length  ALGO-TRUNC-
                     LEN in bits
              o      (for  aead  only)  the Integrity Check Value length ALGO-
                     ICV-LEN in bits
              Encryption  algorithms   include   ecb(cipher_null),   cbc(des),
              cbc(des3_ede),      cbc(cast5),     cbc(blowfish),     cbc(aes),
              cbc(serpent),       cbc(camellia),       cbc(twofish),       and
              rfc3686(ctr(aes)).
              Authentication   algorithms   include   digest_null,  hmac(md5),
              hmac(sha1),    hmac(sha256),     hmac(sha384),     hmac(sha512),
              hmac(rmd160), and xcbc(aes).
              Authenticated  encryption with associated data (AEAD) algorithms
              include      rfc4106(gcm(aes)),      rfc4309(ccm(aes)),      and
              rfc4543(gcm(aes)).
              Compression algorithms include deflate, lzs, and lzjh.

       MODE   specifies  a mode of operation for the transform protocol. IPsec
              and IP Payload Compression modes are transport, tunnel, and (for
              IPsec  ESP  only)  Bound  End-to-End Tunnel (beet).  Mobile IPv6
              modes are route optimization (ro) and inbound trigger  (in_trig-
              ger).

       FLAG-LIST
              contains one or more of the following optional flags: noecn, de-
              cap-dscp, nopmtudisc, wildrecv, icmp, af-unspec, align4, or esn.

       SELECTOR
              selects the traffic that will be controlled by the policy, based
              on  the source address, the destination address, the network de-
              vice, and/or UPSPEC.

       UPSPEC selects traffic by protocol. For the tcp,  udp,  sctp,  or  dccp
              protocols,  the  source  and  destination port can optionally be
              specified.  For the icmp, ipv6-icmp, or  mobility-header  proto-
              cols,  the  type  and  code numbers can optionally be specified.
              For the gre protocol, the key can optionally be specified  as  a
              dotted-quad  or number.  Other protocols can be selected by name
              or number PROTO.

       LIMIT-LIST
              sets limits in seconds, bytes, or numbers of packets.

       ENCAP  encapsulates packets with protocol espinudp or  espinudp-nonike,
              using  source  port SPORT, destination port DPORT , and original
              address OADDR.

       ip xfrm policy add         add a new policy
       ip xfrm policy update      update an existing policy
       ip xfrm policy delete      delete an existing policy
       ip xfrm policy get         get an existing policy
       ip xfrm policy deleteall   delete all existing xfrm policies
       ip xfrm policy list        print out the list of xfrm policies
       ip xfrm policy flush       flush policies

       SELECTOR
              selects the traffic that will be controlled by the policy, based
              on  the source address, the destination address, the network de-
              vice, and/or UPSPEC.

       UPSPEC selects traffic by protocol. For the tcp,  udp,  sctp,  or  dccp
              protocols,  the  source  and  destination port can optionally be
              specified.  For the icmp, ipv6-icmp, or  mobility-header  proto-
              cols,  the  type  and  code numbers can optionally be specified.
              For the gre protocol, the key can optionally be specified  as  a
              dotted-quad  or number.  Other protocols can be selected by name
              or number PROTO.

       DIR    selects the policy direction as in, out, or fwd.

       CTX    sets the security context.

       PTYPE  can be main (default) or sub.

       ACTION can be allow (default) or block.

       PRIORITY
              is a number that defaults to zero.

       FLAG-LIST
              contains one or both of the following optional flags:  local  or
              icmp.

       LIMIT-LIST
              sets limits in seconds, bytes, or numbers of packets.

       TMPL-LIST
              is  a template list specified using ID, MODE, REQID, and/or LEV-
              EL.

       ID     is specified by a source address, destination address, transform
              protocol  XFRM-PROTO, and/or Security Parameter Index SPI.  (For
              IP Payload Compression, the Compression Parameter Index  or  CPI
              is used for SPI.)

       XFRM-PROTO
              specifies  a  transform  protocol:  IPsec Encapsulating Security
              Payload (esp), IPsec Authentication Header (ah), IP Payload Com-
              pression  (comp), Mobile IPv6 Type 2 Routing Header (route2), or
              Mobile IPv6 Home Address Option (hao).

       MODE   specifies a mode of operation for the transform protocol.  IPsec
              and IP Payload Compression modes are transport, tunnel, and (for
              IPsec ESP only) Bound End-to-End  Tunnel  (beet).   Mobile  IPv6
              modes  are route optimization (ro) and inbound trigger (in_trig-
              ger).

       LEVEL  can be required (default) or use.

       ip xfrm policy count   count existing policies

       Use one or more -s options to display more  details,  including  policy
       hash table information.

       ip xfrm policy set   configure the policy hash table

       Security  policies  whose  address  prefix  lengths are greater than or
       equal policy hash table thresholds are hashed. Others are stored in the
       policy_inexact chained list.

       LBITS  specifies  the  minimum  local address prefix length of policies
              that are stored in the Security Policy Database hash table.

       RBITS  specifies the minimum remote address prefix length  of  policies
              that are stored in the Security Policy Database hash table.

       ip xfrm monitor    state monitoring for xfrm objects

       The xfrm objects to monitor can be optionally specified.

       If  the  all-nsid  option  is  set,  the program listens to all network
       namespaces that have a nsid assigned into the  network  namespace  were
       the  program  is  running.   A  prefix is displayed to show the network
       namespace where the message originates. Example:
         [nsid 1]Flushed state proto 0

AUTHOR
       Manpage revised by David Ward <david.ward AT ll.edu>
       Manpage revised by Christophe Gouault <christophe.gouault AT 6wind.com>
       Manpage revised by Nicolas Dichtel <nicolas.dichtel AT 6wind.com>

iproute2                          20 Dec 2011                       IP-XFRM(8)