gittutorial-2(feed) - phpMan

GITTUTORIAL-2(7)                  Git Manual                  GITTUTORIAL-2(7)

NAME
       gittutorial-2 - A tutorial introduction to Git: part two
SYNOPSIS
       git *

DESCRIPTION
       You should work through gittutorial(7) before reading this tutorial.
       The goal of this tutorial is to introduce two fundamental pieces of
       Git's architecture--the object database and the index file--and to
       provide the reader with everything necessary to understand the rest of
       the Git documentation.
THE GIT OBJECT DATABASE
       Let's start a new project and create a small amount of history:
           $ mkdir test-project
           $ cd test-project
           $ git init
           Initialized empty Git repository in .git/
           $ echo 'hello world' > file.txt
           $ git add .
           $ git commit -a -m "initial commit"
           [master (root-commit) 54196cc] initial commit
            1 file changed, 1 insertion(+)
            create mode 100644 file.txt
           $ echo 'hello world!' >file.txt
           $ git commit -a -m "add emphasis"
           [master c4d59f3] add emphasis
            1 file changed, 1 insertion(+), 1 deletion(-)

       What are the 7 digits of hex that Git responded to the commit with?
       We saw in part one of the tutorial that commits have names like this.
       It turns out that every object in the Git history is stored under a
       40-digit hex name. That name is the SHA-1 hash of the object's
       contents; among other things, this ensures that Git will never store
       the same data twice (since identical data is given an identical SHA-1
       name), and that the contents of a Git object will never change (since
       that would change the object's name as well). The 7 char hex strings
       here are simply the abbreviation of such 40 character long strings.
       Abbreviations can be used everywhere where the 40 character strings can
       be used, so long as they are unambiguous.
       It is expected that the content of the commit object you created while
       following the example above generates a different SHA-1 hash than the
       one shown above because the commit object records the time when it was
       created and the name of the person performing the commit.
       We can ask Git about this particular object with the cat-file command.
       Don't copy the 40 hex digits from this example but use those from your
       own version. Note that you can shorten it to only a few characters to
       save yourself typing all 40 hex digits:
           $ git cat-file -t 54196cc2
           commit
           $ git cat-file commit 54196cc2
           tree 92b8b694ffb1675e5975148e1121810081dbdffe
           author J. Bruce Fields <bfields AT puzzle.org> 1143414668 -0500
           committer J. Bruce Fields <bfields AT puzzle.org> 1143414668 -0500
           initial commit

       A tree can refer to one or more "blob" objects, each corresponding to a
       file. In addition, a tree can also refer to other tree objects, thus
       creating a directory hierarchy. You can examine the contents of any
       tree using ls-tree (remember that a long enough initial portion of the
       SHA-1 will also work):
           $ git ls-tree 92b8b694
           100644 blob 3b18e512dba79e4c8300dd08aeb37f8e728b8dad    file.txt

       Thus we see that this tree has one file in it. The SHA-1 hash is a
       reference to that file's data:
           $ git cat-file -t 3b18e512
           blob

       A "blob" is just file data, which we can also examine with cat-file:
           $ git cat-file blob 3b18e512
           hello world

       Note that this is the old file data; so the object that Git named in
       its response to the initial tree was a tree with a snapshot of the
       directory state that was recorded by the first commit.
       All of these objects are stored under their SHA-1 names inside the Git
       directory:
           $ find .git/objects/
           .git/objects/
           .git/objects/pack
           .git/objects/info
           .git/objects/3b
           .git/objects/3b/18e512dba79e4c8300dd08aeb37f8e728b8dad
           .git/objects/92
           .git/objects/92/b8b694ffb1675e5975148e1121810081dbdffe
           .git/objects/54
           .git/objects/54/196cc2703dc165cbd373a65a4dcf22d50ae7f7
           .git/objects/a0
           .git/objects/a0/423896973644771497bdc03eb99d5281615b51
           .git/objects/d0
           .git/objects/d0/492b368b66bdabf2ac1fd8c92b39d3db916e59
           .git/objects/c4
           .git/objects/c4/d59f390b9cfd4318117afde11d601c1085f241

       and the contents of these files is just the compressed data plus a
       header identifying their length and their type. The type is either a
       blob, a tree, a commit, or a tag.
       The simplest commit to find is the HEAD commit, which we can find from
       .git/HEAD:
           $ cat .git/HEAD
           ref: refs/heads/master

       As you can see, this tells us which branch we're currently on, and it
       tells us this by naming a file under the .git directory, which itself
       contains a SHA-1 name referring to a commit object, which we can
       examine with cat-file:
           $ cat .git/refs/heads/master
           c4d59f390b9cfd4318117afde11d601c1085f241
           $ git cat-file -t c4d59f39
           commit
           $ git cat-file commit c4d59f39
           tree d0492b368b66bdabf2ac1fd8c92b39d3db916e59
           parent 54196cc2703dc165cbd373a65a4dcf22d50ae7f7
           author J. Bruce Fields <bfields AT puzzle.org> 1143418702 -0500
           committer J. Bruce Fields <bfields AT puzzle.org> 1143418702 -0500
           add emphasis

       The "tree" object here refers to the new state of the tree:
           $ git ls-tree d0492b36
           100644 blob a0423896973644771497bdc03eb99d5281615b51    file.txt
           $ git cat-file blob a0423896
           hello world!

       and the "parent" object refers to the previous commit:
           $ git cat-file commit 54196cc2
           tree 92b8b694ffb1675e5975148e1121810081dbdffe
           author J. Bruce Fields <bfields AT puzzle.org> 1143414668 -0500
           committer J. Bruce Fields <bfields AT puzzle.org> 1143414668 -0500
           initial commit

       The tree object is the tree we examined first, and this commit is
       unusual in that it lacks any parent.
       Most commits have only one parent, but it is also common for a commit
       to have multiple parents. In that case the commit represents a merge,
       with the parent references pointing to the heads of the merged
       branches.
       Besides blobs, trees, and commits, the only remaining type of object is
       a "tag", which we won't discuss here; refer to git-tag(1) for details.
       So now we know how Git uses the object database to represent a
       project's history:
       o   "commit" objects refer to "tree" objects representing the snapshot
           of a directory tree at a particular point in the history, and refer
           to "parent" commits to show how they're connected into the project
           history.
       o   "tree" objects represent the state of a single directory,
           associating directory names to "blob" objects containing file data
           and "tree" objects containing subdirectory information.
       o   "blob" objects contain file data without any other structure.
       o   References to commit objects at the head of each branch are stored
           in files under .git/refs/heads/.
       o   The name of the current branch is stored in .git/HEAD.
       Note, by the way, that lots of commands take a tree as an argument. But
       as we can see above, a tree can be referred to in many different ways--
       by the SHA-1 name for that tree, by the name of a commit that refers to
       the tree, by the name of a branch whose head refers to that tree,
       etc.--and most such commands can accept any of these names.
       In command synopses, the word "tree-ish" is sometimes used to designate
       such an argument.
THE INDEX FILE
       The primary tool we've been using to create commits is git-commit -a,
       which creates a commit including every change you've made to your
       working tree. But what if you want to commit changes only to certain
       files? Or only certain changes to certain files?
       If we look at the way commits are created under the cover, we'll see
       that there are more flexible ways creating commits.
       Continuing with our test-project, let's modify file.txt again:
           $ echo "hello world, again" >>file.txt

       but this time instead of immediately making the commit, let's take an
       intermediate step, and ask for diffs along the way to keep track of
       what's happening:
           $ git diff
           --- a/file.txt
           +++ b/file.txt
           @@ -1 +1,2 @@
            hello world!
           +hello world, again
           $ git add file.txt
           $ git diff

       The last diff is empty, but no new commits have been made, and the head
       still doesn't contain the new line:
           $ git diff HEAD
           diff --git a/file.txt b/file.txt
           index a042389..513feba 100644
           --- a/file.txt
           +++ b/file.txt
           @@ -1 +1,2 @@
            hello world!
           +hello world, again

       So git diff is comparing against something other than the head. The
       thing that it's comparing against is actually the index file, which is
       stored in .git/index in a binary format, but whose contents we can
       examine with ls-files:
           $ git ls-files --stage
           100644 513feba2e53ebbd2532419ded848ba19de88ba00 0       file.txt
           $ git cat-file -t 513feba2
           blob
           $ git cat-file blob 513feba2
           hello world!
           hello world, again

       So what our git add did was store a new blob and then put a reference
       to it in the index file. If we modify the file again, we'll see that
       the new modifications are reflected in the git diff output:
           $ echo 'again?' >>file.txt
           $ git diff
           index 513feba..ba3da7b 100644
           --- a/file.txt
           +++ b/file.txt
           @@ -1,2 +1,3 @@
            hello world!
            hello world, again
           +again?

       With the right arguments, git diff can also show us the difference
       between the working directory and the last commit, or between the index
       and the last commit:
           $ git diff HEAD
           diff --git a/file.txt b/file.txt
           index a042389..ba3da7b 100644
           --- a/file.txt
           +++ b/file.txt
           @@ -1 +1,3 @@
            hello world!
           +hello world, again
           +again?
           $ git diff --cached
           diff --git a/file.txt b/file.txt
           index a042389..513feba 100644
           --- a/file.txt
           +++ b/file.txt
           @@ -1 +1,2 @@
            hello world!
           +hello world, again

       At any time, we can create a new commit using git commit (without the
       "-a" option), and verify that the state committed only includes the
       changes stored in the index file, not the additional change that is
       still only in our working tree:
           $ git commit -m "repeat"
           $ git diff HEAD
           diff --git a/file.txt b/file.txt
           index 513feba..ba3da7b 100644
           --- a/file.txt
           +++ b/file.txt
           @@ -1,2 +1,3 @@
            hello world!
            hello world, again
           +again?

       So by default git commit uses the index to create the commit, not the
       working tree; the "-a" option to commit tells it to first update the
       index with all changes in the working tree.
       Finally, it's worth looking at the effect of git add on the index file:
           $ echo "goodbye, world" >closing.txt
           $ git add closing.txt

       The effect of the git add was to add one entry to the index file:
           $ git ls-files --stage
           100644 8b9743b20d4b15be3955fc8d5cd2b09cd2336138 0       closing.txt
           100644 513feba2e53ebbd2532419ded848ba19de88ba00 0       file.txt

       And, as you can see with cat-file, this new entry refers to the current
       contents of the file:
           $ git cat-file blob 8b9743b2
           goodbye, world

       The "status" command is a useful way to get a quick summary of the
       situation:
           $ git status
           # On branch master
           # Changes to be committed:
           #   (use "git reset HEAD <file>..." to unstage)
           #
           #       new file: closing.txt
           #
           # Changes not staged for commit:
           #   (use "git add <file>..." to update what will be committed)
           #
           #       modified: file.txt
           #

       Since the current state of closing.txt is cached in the index file, it
       is listed as "Changes to be committed". Since file.txt has changes in
       the working directory that aren't reflected in the index, it is marked
       "changed but not updated". At this point, running "git commit" would
       create a commit that added closing.txt (with its new contents), but
       that didn't modify file.txt.
       Also, note that a bare git diff shows the changes to file.txt, but not
       the addition of closing.txt, because the version of closing.txt in the
       index file is identical to the one in the working directory.
       In addition to being the staging area for new commits, the index file
       is also populated from the object database when checking out a branch,
       and is used to hold the trees involved in a merge operation. See
       gitcore-tutorial(7) and the relevant man pages for details.
WHAT NEXT?
       At this point you should know everything necessary to read the man
       pages for any of the git commands; one good place to start would be
       with the commands mentioned in Everyday Git[1]. You should be able to
       find any unknown jargon in gitglossary(7).
       The Git User's Manual[2] provides a more comprehensive introduction to
       Git.
       gitcvs-migration(7) explains how to import a CVS repository into Git,
       and shows how to use Git in a CVS-like way.
       For some interesting examples of Git use, see the howtos[3].
       For Git developers, gitcore-tutorial(7) goes into detail on the
       lower-level Git mechanisms involved in, for example, creating a new
       commit.
SEE ALSO
       gittutorial(7), gitcvs-migration(7), gitcore-tutorial(7),
       gitglossary(7), git-help(1), Everyday Git[1], The Git User's Manual[2]
GIT
       Part of the git(1) suite.
NOTES
        1. Everyday Git
           file:///usr/share/doc/git-1.8.3.1/everyday.html
        2. Git User's Manual
           file:///usr/share/doc/git-1.8.3.1/user-manual.html
        3. howtos
           file:///usr/share/doc/git-1.8.3.1/howto-index.html

Git 1.8.3.1                       07/30/2024                  GITTUTORIAL-2(7)