GIT-TAG(1) Git Manual GIT-TAG(1)
NAME
git-tag - Create, list, delete or verify a tag object signed with GPG
SYNOPSIS
git tag [-a | -s | -u <key-id>] [-f] [-m <msg> | -F <file>] [-e]
<tagname> [<commit> | <object>]
git tag -d <tagname>...
git tag [-n[<num>]] -l [--contains <commit>] [--no-contains <commit>]
[--points-at <object>] [--column[=<options>] | --no-column]
[--create-reflog] [--sort=<key>] [--format=<format>]
[--merged <commit>] [--no-merged <commit>] [<pattern>...]
git tag -v [--format=<format>] <tagname>...
DESCRIPTION
Add a tag reference in refs/tags/, unless -d/-l/-v is given to delete,
list or verify tags.
Unless -f is given, the named tag must not yet exist.
If one of -a, -s, or -u <key-id> is passed, the command creates a tag
object, and requires a tag message. Unless -m <msg> or -F <file> is
given, an editor is started for the user to type in the tag message.
If -m <msg> or -F <file> is given and -a, -s, and -u <key-id> are
absent, -a is implied.
Otherwise, a tag reference that points directly at the given object
(i.e., a lightweight tag) is created.
A GnuPG signed tag object will be created when -s or -u <key-id> is
used. When -u <key-id> is not used, the committer identity for the
current user is used to find the GnuPG key for signing. The
configuration variable gpg.program is used to specify custom GnuPG
binary.
Tag objects (created with -a, -s, or -u) are called "annotated" tags;
they contain a creation date, the tagger name and e-mail, a tagging
message, and an optional GnuPG signature. Whereas a "lightweight" tag
is simply a name for an object (usually a commit object).
Annotated tags are meant for release while lightweight tags are meant
for private or temporary object labels. For this reason, some git
commands for naming objects (like git describe) will ignore lightweight
tags by default.
OPTIONS
-a, --annotate
Make an unsigned, annotated tag object
-s, --sign
Make a GPG-signed tag, using the default e-mail address's key. The
default behavior of tag GPG-signing is controlled by tag.gpgSign
configuration variable if it exists, or disabled otherwise. See
git-config(1).
--no-sign
Override tag.gpgSign configuration variable that is set to force
each and every tag to be signed.
-u <key-id>, --local-user=<key-id>
Make a GPG-signed tag, using the given key.
-f, --force
Replace an existing tag with the given name (instead of failing)
-d, --delete
Delete existing tags with the given names.
-v, --verify
Verify the GPG signature of the given tag names.
-n<num>
<num> specifies how many lines from the annotation, if any, are
printed when using -l. Implies --list.
The default is not to print any annotation lines. If no number is
given to -n, only the first line is printed. If the tag is not
annotated, the commit message is displayed instead.
-l, --list
List tags. With optional <pattern>..., e.g. git tag --list 'v-*',
list only the tags that match the pattern(s).
Running "git tag" without arguments also lists all tags. The
pattern is a shell wildcard (i.e., matched using fnmatch(3)).
Multiple patterns may be given; if any of them matches, the tag is
shown.
This option is implicitly supplied if any other list-like option
such as --contains is provided. See the documentation for each of
those options for details.
--sort=<key>
Sort based on the key given. Prefix - to sort in descending order
of the value. You may use the --sort=<key> option multiple times,
in which case the last key becomes the primary key. Also supports
"version:refname" or "v:refname" (tag names are treated as
versions). The "version:refname" sort order can also be affected by
the "versionsort.suffix" configuration variable. The keys supported
are the same as those in git for-each-ref. Sort order defaults to
the value configured for the tag.sort variable if it exists, or
lexicographic order otherwise. See git-config(1).
--color[=<when>]
Respect any colors specified in the --format option. The <when>
field must be one of always, never, or auto (if <when> is absent,
behave as if always was given).
-i, --ignore-case
Sorting and filtering tags are case insensitive.
--omit-empty
Do not print a newline after formatted refs where the format
expands to the empty string.
--column[=<options>], --no-column
Display tag listing in columns. See configuration variable
column.tag for option syntax. --column and --no-column without
options are equivalent to always and never respectively.
This option is only applicable when listing tags without annotation
lines.
--contains [<commit>]
Only list tags which contain the specified commit (HEAD if not
specified). Implies --list.
--no-contains [<commit>]
Only list tags which don't contain the specified commit (HEAD if
not specified). Implies --list.
--merged [<commit>]
Only list tags whose commits are reachable from the specified
commit (HEAD if not specified).
--no-merged [<commit>]
Only list tags whose commits are not reachable from the specified
commit (HEAD if not specified).
--points-at <object>
Only list tags of the given object (HEAD if not specified). Implies
--list.
-m <msg>, --message=<msg>
Use the given tag message (instead of prompting). If multiple -m
options are given, their values are concatenated as separate
paragraphs. Implies -a if none of -a, -s, or -u <key-id> is given.
-F <file>, --file=<file>
Take the tag message from the given file. Use - to read the message
from the standard input. Implies -a if none of -a, -s, or -u
<key-id> is given.
-e, --edit
The message taken from file with -F and command line with -m are
usually used as the tag message unmodified. This option lets you
further edit the message taken from these sources.
--cleanup=<mode>
This option sets how the tag message is cleaned up. The <mode> can
be one of verbatim, whitespace and strip. The strip mode is
default. The verbatim mode does not change message at all,
whitespace removes just leading/trailing whitespace lines and strip
removes both whitespace and commentary.
--create-reflog
Create a reflog for the tag. To globally enable reflogs for tags,
see core.logAllRefUpdates in git-config(1). The negated form
--no-create-reflog only overrides an earlier --create-reflog, but
currently does not negate the setting of core.logAllRefUpdates.
--format=<format>
A string that interpolates %(fieldname) from a tag ref being shown
and the object it points at. The format is the same as that of git-
for-each-ref(1). When unspecified, defaults to %(refname:strip=2).
<tagname>
The name of the tag to create, delete, or describe. The new tag
name must pass all checks defined by git-check-ref-format(1). Some
of these checks may restrict the characters allowed in a tag name.
<commit>, <object>
The object that the new tag will refer to, usually a commit.
Defaults to HEAD.
CONFIGURATION
By default, git tag in sign-with-default mode (-s) will use your
committer identity (of the form Your Name <your AT email.address>) to find
a key. If you want to use a different default key, you can specify it
in the repository configuration as follows:
[user]
signingKey = <gpg-key_id>
pager.tag is only respected when listing tags, i.e., when -l is used or
implied. The default is to use a pager. See git-config(1).
DISCUSSION
On Re-tagging
What should you do when you tag a wrong commit and you would want to
re-tag?
If you never pushed anything out, just re-tag it. Use "-f" to replace
the old one. And you're done.
But if you have pushed things out (or others could just read your
repository directly), then others will have already seen the old tag.
In that case you can do one of two things:
1. The sane thing. Just admit you screwed up, and use a different
name. Others have already seen one tag-name, and if you keep the
same name, you may be in the situation that two people both have
"version X", but they actually have different "X"'s. So just call
it "X.1" and be done with it.
2. The insane thing. You really want to call the new version "X" too,
even though others have already seen the old one. So just use git
tag -f again, as if you hadn't already published the old one.
However, Git does not (and it should not) change tags behind users
back. So if somebody already got the old tag, doing a git pull on your
tree shouldn't just make them overwrite the old one.
If somebody got a release tag from you, you cannot just change the tag
for them by updating your own one. This is a big security issue, in
that people MUST be able to trust their tag-names. If you really want
to do the insane thing, you need to just fess up to it, and tell people
that you messed up. You can do that by making a very public
announcement saying:
Ok, I messed up, and I pushed out an earlier version tagged as X. I
then fixed something, and retagged the *fixed* tree as X again.
If you got the wrong tag, and want the new one, please delete
the old one and fetch the new one by doing:
git tag -d X
git fetch origin tag X
to get my updated tag.
You can test which tag you have by doing
git rev-parse X
which should return 0123456789abcdef.. if you have the new version.
Sorry for the inconvenience.
Does this seem a bit complicated? It should be. There is no way that it
would be correct to just "fix" it automatically. People need to know
that their tags might have been changed.
On Automatic following
If you are following somebody else's tree, you are most likely using
remote-tracking branches (eg. refs/remotes/origin/master). You usually
want the tags from the other end.
On the other hand, if you are fetching because you would want a
one-shot merge from somebody else, you typically do not want to get
tags from there. This happens more often for people near the toplevel
but not limited to them. Mere mortals when pulling from each other do
not necessarily want to automatically get private anchor point tags
from the other person.
Often, "please pull" messages on the mailing list just provide two
pieces of information: a repo URL and a branch name; this is designed
to be easily cut&pasted at the end of a git fetch command line:
Linus, please pull from
git://git..../proj.git master
to get the following updates...
becomes:
$ git pull git://git..../proj.git master
In such a case, you do not want to automatically follow the other
person's tags.
One important aspect of Git is its distributed nature, which largely
means there is no inherent "upstream" or "downstream" in the system. On
the face of it, the above example might seem to indicate that the tag
namespace is owned by the upper echelon of people and that tags only
flow downwards, but that is not the case. It only shows that the usage
pattern determines who are interested in whose tags.
A one-shot pull is a sign that a commit history is now crossing the
boundary between one circle of people (e.g. "people who are primarily
interested in the networking part of the kernel") who may have their
own set of tags (e.g. "this is the third release candidate from the
networking group to be proposed for general consumption with 2.6.21
release") to another circle of people (e.g. "people who integrate
various subsystem improvements"). The latter are usually not interested
in the detailed tags used internally in the former group (that is what
"internal" means). That is why it is desirable not to follow tags
automatically in this case.
It may well be that among networking people, they may want to exchange
the tags internal to their group, but in that workflow they are most
likely tracking each other's progress by having remote-tracking
branches. Again, the heuristic to automatically follow such tags is a
good thing.
On Backdating Tags
If you have imported some changes from another VCS and would like to
add tags for major releases of your work, it is useful to be able to
specify the date to embed inside of the tag object; such data in the
tag object affects, for example, the ordering of tags in the gitweb
interface.
To set the date used in future tag objects, set the environment
variable GIT_COMMITTER_DATE (see the later discussion of possible
values; the most common form is "YYYY-MM-DD HH:MM").
For example:
$ GIT_COMMITTER_DATE="2006-10-02 10:31" git tag -s v1.0.1
DATE FORMATS
The GIT_AUTHOR_DATE and GIT_COMMITTER_DATE environment variables
support the following date formats:
Git internal format
It is <unix-timestamp> <time-zone-offset>, where <unix-timestamp>
is the number of seconds since the UNIX epoch. <time-zone-offset>
is a positive or negative offset from UTC. For example CET (which
is 1 hour ahead of UTC) is +0100.
RFC 2822
The standard email format as described by RFC 2822, for example
Thu, 07 Apr 2005 22:13:13 +0200.
ISO 8601
Time and date specified by the ISO 8601 standard, for example
2005-04-07T22:13:13. The parser accepts a space instead of the T
character as well. Fractional parts of a second will be ignored,
for example 2005-04-07T22:13:13.019 will be treated as
2005-04-07T22:13:13.
Note
In addition, the date part is accepted in the following
formats: YYYY.MM.DD, MM/DD/YYYY and DD.MM.YYYY.
FILES
$GIT_DIR/TAG_EDITMSG
This file contains the message of an in-progress annotated tag. If
git tag exits due to an error before creating an annotated tag then
the tag message that has been provided by the user in an editor
session will be available in this file, but may be overwritten by
the next invocation of git tag.
NOTES
When combining multiple --contains and --no-contains filters, only
references that contain at least one of the --contains commits and
contain none of the --no-contains commits are shown.
When combining multiple --merged and --no-merged filters, only
references that are reachable from at least one of the --merged commits
and from none of the --no-merged commits are shown.
SEE ALSO
git-check-ref-format(1). git-config(1).
GIT
Part of the git(1) suite
Git 2.43.5 05/31/2024 GIT-TAG(1)
Linux-Distributionen
Huschi als Linux-Admin