GIT-DIFF-TREE(1) Git Manual GIT-DIFF-TREE(1)
NAME
git-diff-tree - Compares the content and mode of blobs found via two
tree objects
SYNOPSIS
git diff-tree [--stdin] [-m] [-s] [-v] [--no-commit-id] [--pretty]
[-t] [-r] [-c | --cc] [--root] [<common diff options>]
<tree-ish> [<tree-ish>] [<path>...]
DESCRIPTION
Compares the content and mode of the blobs found via two tree objects.
If there is only one <tree-ish> given, the commit is compared with its
parents (see --stdin below).
Note that git diff-tree can use the tree encapsulated in a commit
object.
OPTIONS
-p, -u, --patch
Generate patch (see section on generating patches).
-U<n>, --unified=<n>
Generate diffs with <n> lines of context instead of the usual
three. Implies -p.
--raw
Generate the raw format. This is the default.
--patch-with-raw
Synonym for -p --raw.
--minimal
Spend extra time to make sure the smallest possible diff is
produced.
--patience
Generate a diff using the "patience diff" algorithm.
--histogram
Generate a diff using the "histogram diff" algorithm.
--diff-algorithm={patience|minimal|histogram|myers}
Choose a diff algorithm. The variants are as follows:
default, myers
The basic greedy diff algorithm. Currently, this is the
default.
minimal
Spend extra time to make sure the smallest possible diff is
produced.
patience
Use "patience diff" algorithm when generating patches.
histogram
This algorithm extends the patience algorithm to "support
low-occurrence common elements".
For instance, if you configured diff.algorithm variable to a
non-default value and want to use the default one, then you have to
use --diff-algorithm=default option.
--stat[=<width>[,<name-width>[,<count>]]]
Generate a diffstat. By default, as much space as necessary will be
used for the filename part, and the rest for the graph part.
Maximum width defaults to terminal width, or 80 columns if not
connected to a terminal, and can be overridden by <width>. The
width of the filename part can be limited by giving another width
<name-width> after a comma. The width of the graph part can be
limited by using --stat-graph-width=<width> (affects all commands
generating a stat graph) or by setting diff.statGraphWidth=<width>
(does not affect git format-patch). By giving a third parameter
<count>, you can limit the output to the first <count> lines,
followed by ... if there are more.
These parameters can also be set individually with
--stat-width=<width>, --stat-name-width=<name-width> and
--stat-count=<count>.
--numstat
Similar to --stat, but shows number of added and deleted lines in
decimal notation and pathname without abbreviation, to make it more
machine friendly. For binary files, outputs two - instead of saying
0 0.
--shortstat
Output only the last line of the --stat format containing total
number of modified files, as well as number of added and deleted
lines.
--dirstat[=<param1,param2,...>]
Output the distribution of relative amount of changes for each
sub-directory. The behavior of --dirstat can be customized by
passing it a comma separated list of parameters. The defaults are
controlled by the diff.dirstat configuration variable (see git-
config(1)). The following parameters are available:
changes
Compute the dirstat numbers by counting the lines that have
been removed from the source, or added to the destination. This
ignores the amount of pure code movements within a file. In
other words, rearranging lines in a file is not counted as much
as other changes. This is the default behavior when no
parameter is given.
lines
Compute the dirstat numbers by doing the regular line-based
diff analysis, and summing the removed/added line counts. (For
binary files, count 64-byte chunks instead, since binary files
have no natural concept of lines). This is a more expensive
--dirstat behavior than the changes behavior, but it does count
rearranged lines within a file as much as other changes. The
resulting output is consistent with what you get from the other
--*stat options.
files
Compute the dirstat numbers by counting the number of files
changed. Each changed file counts equally in the dirstat
analysis. This is the computationally cheapest --dirstat
behavior, since it does not have to look at the file contents
at all.
cumulative
Count changes in a child directory for the parent directory as
well. Note that when using cumulative, the sum of the
percentages reported may exceed 100%. The default
(non-cumulative) behavior can be specified with the
noncumulative parameter.
<limit>
An integer parameter specifies a cut-off percent (3% by
default). Directories contributing less than this percentage of
the changes are not shown in the output.
Example: The following will count changed files, while ignoring
directories with less than 10% of the total amount of changed
files, and accumulating child directory counts in the parent
directories: --dirstat=files,10,cumulative.
--summary
Output a condensed summary of extended header information such as
creations, renames and mode changes.
--patch-with-stat
Synonym for -p --stat.
-z
When --raw, --numstat, --name-only or --name-status has been given,
do not munge pathnames and use NULs as output field terminators.
Without this option, each pathname output will have TAB, LF, double
quotes, and backslash characters replaced with \t, \n, \", and \\,
respectively, and the pathname will be enclosed in double quotes if
any of those replacements occurred.
--name-only
Show only names of changed files.
--name-status
Show only names and status of changed files. See the description of
the --diff-filter option on what the status letters mean.
--submodule[=<format>]
Specify how differences in submodules are shown. When --submodule
or --submodule=log is given, the log format is used. This format
lists the commits in the range like git-submodule(1)summary does.
Omitting the --submodule option or specifying --submodule=short,
uses the short format. This format just shows the names of the
commits at the beginning and end of the range. Can be tweaked via
the diff.submodule configuration variable.
--color[=<when>]
Show colored diff. --color (i.e. without =<when>) is the same as
--color=always. <when> can be one of always, never, or auto.
--no-color
Turn off colored diff. It is the same as --color=never.
--word-diff[=<mode>]
Show a word diff, using the <mode> to delimit changed words. By
default, words are delimited by whitespace; see --word-diff-regex
below. The <mode> defaults to plain, and must be one of:
color
Highlight changed words using only colors. Implies --color.
plain
Show words as [-removed-] and {+added+}. Makes no attempts to
escape the delimiters if they appear in the input, so the
output may be ambiguous.
porcelain
Use a special line-based format intended for script
consumption. Added/removed/unchanged runs are printed in the
usual unified diff format, starting with a +/-/` ` character at
the beginning of the line and extending to the end of the line.
Newlines in the input are represented by a tilde ~ on a line of
its own.
none
Disable word diff again.
Note that despite the name of the first mode, color is used to
highlight the changed parts in all modes if enabled.
--word-diff-regex=<regex>
Use <regex> to decide what a word is, instead of considering runs
of non-whitespace to be a word. Also implies --word-diff unless it
was already enabled.
Every non-overlapping match of the <regex> is considered a word.
Anything between these matches is considered whitespace and
ignored(!) for the purposes of finding differences. You may want to
append |[^[:space:]] to your regular expression to make sure that
it matches all non-whitespace characters. A match that contains a
newline is silently truncated(!) at the newline.
The regex can also be set via a diff driver or configuration
option, see gitattributes(1) or git-config(1). Giving it explicitly
overrides any diff driver or configuration setting. Diff drivers
override configuration settings.
--color-words[=<regex>]
Equivalent to --word-diff=color plus (if a regex was specified)
--word-diff-regex=<regex>.
--no-renames
Turn off rename detection, even when the configuration file gives
the default to do so.
--check
Warn if changes introduce whitespace errors. What are considered
whitespace errors is controlled by core.whitespace configuration.
By default, trailing whitespaces (including lines that solely
consist of whitespaces) and a space character that is immediately
followed by a tab character inside the initial indent of the line
are considered whitespace errors. Exits with non-zero status if
problems are found. Not compatible with --exit-code.
--full-index
Instead of the first handful of characters, show the full pre- and
post-image blob object names on the "index" line when generating
patch format output.
--binary
In addition to --full-index, output a binary diff that can be
applied with git-apply.
--abbrev[=<n>]
Instead of showing the full 40-byte hexadecimal object name in
diff-raw format output and diff-tree header lines, show only a
partial prefix. This is independent of the --full-index option
above, which controls the diff-patch output format. Non default
number of digits can be specified with --abbrev=<n>.
-B[<n>][/<m>], --break-rewrites[=[<n>][/<m>]]
Break complete rewrite changes into pairs of delete and create.
This serves two purposes:
It affects the way a change that amounts to a total rewrite of a
file not as a series of deletion and insertion mixed together with
a very few lines that happen to match textually as the context, but
as a single deletion of everything old followed by a single
insertion of everything new, and the number m controls this aspect
of the -B option (defaults to 60%). -B/70% specifies that less
than 30% of the original should remain in the result for Git to
consider it a total rewrite (i.e. otherwise the resulting patch
will be a series of deletion and insertion mixed together with
context lines).
When used with -M, a totally-rewritten file is also considered as
the source of a rename (usually -M only considers a file that
disappeared as the source of a rename), and the number n controls
this aspect of the -B option (defaults to 50%). -B20% specifies
that a change with addition and deletion compared to 20% or more of
the file's size are eligible for being picked up as a possible
source of a rename to another file.
-M[<n>], --find-renames[=<n>]
Detect renames. If n is specified, it is a threshold on the
similarity index (i.e. amount of addition/deletions compared to the
file's size). For example, -M90% means Git should consider a
delete/add pair to be a rename if more than 90% of the file hasn't
changed. Without a % sign, the number is to be read as a fraction,
with a decimal point before it. I.e., -M5 becomes 0.5, and is thus
the same as -M50%. Similarly, -M05 is the same as -M5%. To limit
detection to exact renames, use -M100%.
-C[<n>], --find-copies[=<n>]
Detect copies as well as renames. See also --find-copies-harder. If
n is specified, it has the same meaning as for -M<n>.
--find-copies-harder
For performance reasons, by default, -C option finds copies only if
the original file of the copy was modified in the same changeset.
This flag makes the command inspect unmodified files as candidates
for the source of copy. This is a very expensive operation for
large projects, so use it with caution. Giving more than one -C
option has the same effect.
-D, --irreversible-delete
Omit the preimage for deletes, i.e. print only the header but not
the diff between the preimage and /dev/null. The resulting patch is
not meant to be applied with patch nor git apply; this is solely
for people who want to just concentrate on reviewing the text after
the change. In addition, the output obviously lack enough
information to apply such a patch in reverse, even manually, hence
the name of the option.
When used together with -B, omit also the preimage in the deletion
part of a delete/create pair.
-l<num>
The -M and -C options require O(n^2) processing time where n is the
number of potential rename/copy targets. This option prevents
rename/copy detection from running if the number of rename/copy
targets exceeds the specified number.
--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]
Select only files that are Added (A), Copied (C), Deleted (D),
Modified (M), Renamed (R), have their type (i.e. regular file,
symlink, submodule, ...) changed (T), are Unmerged (U), are Unknown
(X), or have had their pairing Broken (B). Any combination of the
filter characters (including none) can be used. When *
(All-or-none) is added to the combination, all paths are selected
if there is any file that matches other criteria in the comparison;
if there is no file that matches other criteria, nothing is
selected.
-S<string>
Look for differences that introduce or remove an instance of
<string>. Note that this is different than the string simply
appearing in diff output; see the pickaxe entry in gitdiffcore(7)
for more details.
-G<regex>
Look for differences whose added or removed line matches the given
<regex>.
--pickaxe-all
When -S or -G finds a change, show all the changes in that
changeset, not just the files that contain the change in <string>.
--pickaxe-regex
Make the <string> not a plain string but an extended POSIX regex to
match.
-O<orderfile>
Output the patch in the order specified in the <orderfile>, which
has one shell glob pattern per line.
-R
Swap two inputs; that is, show differences from index or on-disk
file to tree contents.
--relative[=<path>]
When run from a subdirectory of the project, it can be told to
exclude changes outside the directory and show pathnames relative
to it with this option. When you are not in a subdirectory (e.g. in
a bare repository), you can name which subdirectory to make the
output relative to by giving a <path> as an argument.
-a, --text
Treat all files as text.
--ignore-space-at-eol
Ignore changes in whitespace at EOL.
-b, --ignore-space-change
Ignore changes in amount of whitespace. This ignores whitespace at
line end, and considers all other sequences of one or more
whitespace characters to be equivalent.
-w, --ignore-all-space
Ignore whitespace when comparing lines. This ignores differences
even if one line has whitespace where the other line has none.
--inter-hunk-context=<lines>
Show the context between diff hunks, up to the specified number of
lines, thereby fusing hunks that are close to each other.
-W, --function-context
Show whole surrounding functions of changes.
--exit-code
Make the program exit with codes similar to diff(1). That is, it
exits with 1 if there were differences and 0 means no differences.
--quiet
Disable all output of the program. Implies --exit-code.
--ext-diff
Allow an external diff helper to be executed. If you set an
external diff driver with gitattributes(5), you need to use this
option with git-log(1) and friends.
--no-ext-diff
Disallow external diff drivers.
--textconv, --no-textconv
Allow (or disallow) external text conversion filters to be run when
comparing binary files. See gitattributes(5) for details. Because
textconv filters are typically a one-way conversion, the resulting
diff is suitable for human consumption, but cannot be applied. For
this reason, textconv filters are enabled by default only for git-
diff(1) and git-log(1), but not for git-format-patch(1) or diff
plumbing commands.
--ignore-submodules[=<when>]
Ignore changes to submodules in the diff generation. <when> can be
either "none", "untracked", "dirty" or "all", which is the default.
Using "none" will consider the submodule modified when it either
contains untracked or modified files or its HEAD differs from the
commit recorded in the superproject and can be used to override any
settings of the ignore option in git-config(1) or gitmodules(5).
When "untracked" is used submodules are not considered dirty when
they only contain untracked content (but they are still scanned for
modified content). Using "dirty" ignores all changes to the work
tree of submodules, only changes to the commits stored in the
superproject are shown (this was the behavior until 1.7.0). Using
"all" hides all changes to submodules.
--src-prefix=<prefix>
Show the given source prefix instead of "a/".
--dst-prefix=<prefix>
Show the given destination prefix instead of "b/".
--no-prefix
Do not show any source or destination prefix.
For more detailed explanation on these common options, see also
gitdiffcore(7).
<tree-ish>
The id of a tree object.
<path>...
If provided, the results are limited to a subset of files matching
one of these prefix strings. i.e., file matches
/^<pattern1>|<pattern2>|.../ Note that this parameter does not
provide any wildcard or regexp features.
-r
recurse into sub-trees
-t
show tree entry itself as well as subtrees. Implies -r.
--root
When --root is specified the initial commit will be shown as a big
creation event. This is equivalent to a diff against the NULL tree.
--stdin
When --stdin is specified, the command does not take <tree-ish>
arguments from the command line. Instead, it reads lines containing
either two <tree>, one <commit>, or a list of <commit> from its
standard input. (Use a single space as separator.)
When two trees are given, it compares the first tree with the
second. When a single commit is given, it compares the commit with
its parents. The remaining commits, when given, are used as if they
are parents of the first commit.
When comparing two trees, the ID of both trees (separated by a
space and terminated by a newline) is printed before the
difference. When comparing commits, the ID of the first (or only)
commit, followed by a newline, is printed.
The following flags further affect the behavior when comparing
commits (but not trees).
-m
By default, git diff-tree --stdin does not show differences for
merge commits. With this flag, it shows differences to that commit
from all of its parents. See also -c.
-s
By default, git diff-tree --stdin shows differences, either in
machine-readable form (without -p) or in patch form (with -p). This
output can be suppressed. It is only useful with -v flag.
-v
This flag causes git diff-tree --stdin to also show the commit
message before the differences.
--pretty[=<format>], --format=<format>
Pretty-print the contents of the commit logs in a given format,
where <format> can be one of oneline, short, medium, full, fuller,
email, raw and format:<string>. See the "PRETTY FORMATS" section
for some additional details for each format. When omitted, the
format defaults to medium.
Note: you can specify the default pretty format in the repository
configuration (see git-config(1)).
--abbrev-commit
Instead of showing the full 40-byte hexadecimal commit object name,
show only a partial prefix. Non default number of digits can be
specified with "--abbrev=<n>" (which also modifies diff output, if
it is displayed).
This should make "--pretty=oneline" a whole lot more readable for
people using 80-column terminals.
--no-abbrev-commit
Show the full 40-byte hexadecimal commit object name. This negates
--abbrev-commit and those options which imply it such as
"--oneline". It also overrides the log.abbrevCommit variable.
--oneline
This is a shorthand for "--pretty=oneline --abbrev-commit" used
together.
--encoding[=<encoding>]
The commit objects record the encoding used for the log message in
their encoding header; this option can be used to tell the command
to re-code the commit log message in the encoding preferred by the
user. For non plumbing commands this defaults to UTF-8.
--notes[=<ref>]
Show the notes (see git-notes(1)) that annotate the commit, when
showing the commit log message. This is the default for git log,
git show and git whatchanged commands when there is no --pretty,
--format nor --oneline option given on the command line.
By default, the notes shown are from the notes refs listed in the
core.notesRef and notes.displayRef variables (or corresponding
environment overrides). See git-config(1) for more details.
With an optional <ref> argument, show this notes ref instead of the
default notes ref(s). The ref is taken to be in refs/notes/ if it
is not qualified.
Multiple --notes options can be combined to control which notes are
being displayed. Examples: "--notes=foo" will show only notes from
"refs/notes/foo"; "--notes=foo --notes" will show both notes from
"refs/notes/foo" and from the default notes ref(s).
--no-notes
Do not show notes. This negates the above --notes option, by
resetting the list of notes refs from which notes are shown.
Options are parsed in the order given on the command line, so e.g.
"--notes --notes=foo --no-notes --notes=bar" will only show notes
from "refs/notes/bar".
--show-notes[=<ref>], --[no-]standard-notes
These options are deprecated. Use the above --notes/--no-notes
options instead.
--show-signature
Check the validity of a signed commit object by passing the
signature to gpg --verify and show the output.
--no-commit-id
git diff-tree outputs a line with the commit ID when applicable.
This flag suppressed the commit ID output.
-c
This flag changes the way a merge commit is displayed (which means
it is useful only when the command is given one <tree-ish>, or
--stdin). It shows the differences from each of the parents to the
merge result simultaneously instead of showing pairwise diff
between a parent and the result one at a time (which is what the -m
option does). Furthermore, it lists only files which were modified
from all parents.
--cc
This flag changes the way a merge commit patch is displayed, in a
similar way to the -c option. It implies the -c and -p options and
further compresses the patch output by omitting uninteresting hunks
whose the contents in the parents have only two variants and the
merge result picks one of them without modification. When all hunks
are uninteresting, the commit itself and the commit log message is
not shown, just like in any other "empty diff" case.
--always
Show the commit itself and the commit log message even if the diff
itself is empty.
PRETTY FORMATS
If the commit is a merge, and if the pretty-format is not oneline,
email or raw, an additional line is inserted before the Author: line.
This line begins with "Merge: " and the sha1s of ancestral commits are
printed, separated by spaces. Note that the listed commits may not
necessarily be the list of the direct parent commits if you have
limited your view of history: for example, if you are only interested
in changes related to a certain directory or file.
There are several built-in formats, and you can define additional
formats by setting a pretty.<name> config option to either another
format name, or a format: string, as described below (see git-
config(1)). Here are the details of the built-in formats:
o oneline
<sha1> <title line>
This is designed to be as compact as possible.
o short
commit <sha1>
Author: <author>
<title line>
o medium
commit <sha1>
Author: <author>
Date: <author date>
<title line>
<full commit message>
o full
commit <sha1>
Author: <author>
Commit: <committer>
<title line>
<full commit message>
o fuller
commit <sha1>
Author: <author>
AuthorDate: <author date>
Commit: <committer>
CommitDate: <committer date>
<title line>
<full commit message>
o email
From <sha1> <date>
From: <author>
Date: <author date>
Subject: [PATCH] <title line>
<full commit message>
o raw
The raw format shows the entire commit exactly as stored in the
commit object. Notably, the SHA-1s are displayed in full,
regardless of whether --abbrev or --no-abbrev are used, and parents
information show the true parent commits, without taking grafts nor
history simplification into account.
o format:<string>
The format:<string> format allows you to specify which information
you want to show. It works a little bit like printf format, with
the notable exception that you get a newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title was >>%s<<%n"
would show something like this:
The author of fe6e0ee was Junio C Hamano, 23 hours ago
The title was >>t4119: test autocomputing -p<n> for traditional diff input.<<
The placeholders are:
o %H: commit hash
o %h: abbreviated commit hash
o %T: tree hash
o %t: abbreviated tree hash
o %P: parent hashes
o %p: abbreviated parent hashes
o %an: author name
o %aN: author name (respecting .mailmap, see git-shortlog(1) or
git-blame(1))
o %ae: author email
o %aE: author email (respecting .mailmap, see git-shortlog(1) or
git-blame(1))
o %ad: author date (format respects --date= option)
o %aD: author date, RFC2822 style
o %ar: author date, relative
o %at: author date, UNIX timestamp
o %ai: author date, ISO 8601 format
o %cn: committer name
o %cN: committer name (respecting .mailmap, see git-shortlog(1)
or git-blame(1))
o %ce: committer email
o %cE: committer email (respecting .mailmap, see git-shortlog(1)
or git-blame(1))
o %cd: committer date
o %cD: committer date, RFC2822 style
o %cr: committer date, relative
o %ct: committer date, UNIX timestamp
o %ci: committer date, ISO 8601 format
o %d: ref names, like the --decorate option of git-log(1)
o %e: encoding
o %s: subject
o %f: sanitized subject line, suitable for a filename
o %b: body
o %B: raw body (unwrapped subject and body)
o %N: commit notes
o %GG: raw verification message from GPG for a signed commit
o %G?: show "G" for a Good signature, "B" for a Bad signature,
"U" for a good, untrusted signature and "N" for no signature
o %GS: show the name of the signer for a signed commit
o %GK: show the key used to sign a signed commit
o %gD: reflog selector, e.g., refs/stash@{1}
o %gd: shortened reflog selector, e.g., stash@{1}
o %gn: reflog identity name
o %gN: reflog identity name (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
o %ge: reflog identity email
o %gE: reflog identity email (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
o %gs: reflog subject
o %Cred: switch color to red
o %Cgreen: switch color to green
o %Cblue: switch color to blue
o %Creset: reset color
o %C(...): color specification, as described in color.branch.*
config option; adding auto, at the beginning will emit color
only when colors are enabled for log output (by color.diff,
color.ui, or --color, and respecting the auto settings of the
former if we are going to a terminal). auto alone (i.e.
%C(auto)) will turn on auto coloring on the next placeholders
until the color is switched again.
o %m: left, right or boundary mark
o %n: newline
o %%: a raw %
o %x00: print a byte from a hex code
o %w([<w>[,<i1>[,<i2>]]]): switch line wrapping, like the -w
option of git-shortlog(1).
o %<(<N>[,trunc|ltrunc|mtrunc]): make the next placeholder take
at least N columns, padding spaces on the right if necessary.
Optionally truncate at the beginning (ltrunc), the middle
(mtrunc) or the end (trunc) if the output is longer than N
columns. Note that truncating only works correctly with N >= 2.
o %<|(<N>): make the next placeholder take at least until Nth
columns, padding spaces on the right if necessary
o %>(<N>), %>|(<N>): similar to %<(<N>), %<|(<N>) respectively,
but padding spaces on the left
o %>>(<N>), %>>|(<N>): similar to %>(<N>), %>|(<N>) respectively,
except that if the next placeholder takes more spaces than
given and there are spaces on its left, use those spaces
o %><(<N>), %><|(<N>): similar to % <(<N>), %<|(<N>)
respectively, but padding both sides (i.e. the text is
centered)
Note
Some placeholders may depend on other options given to the revision
traversal engine. For example, the %g* reflog options will insert
an empty string unless we are traversing reflog entries (e.g., by
git log -g). The %d placeholder will use the "short" decoration
format if --decorate was not already provided on the command line.
If you add a + (plus sign) after % of a placeholder, a line-feed is
inserted immediately before the expansion if and only if the
placeholder expands to a non-empty string.
If you add a - (minus sign) after % of a placeholder, line-feeds that
immediately precede the expansion are deleted if and only if the
placeholder expands to an empty string.
If you add a ` ` (space) after % of a placeholder, a space is inserted
immediately before the expansion if and only if the placeholder expands
to a non-empty string.
o tformat:
The tformat: format works exactly like format:, except that it
provides "terminator" semantics instead of "separator" semantics.
In other words, each commit has the message terminator character
(usually a newline) appended, rather than a separator placed
between entries. This means that the final entry of a single-line
format will be properly terminated with a new line, just as the
"oneline" format does. For example:
$ git log -2 --pretty=format:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973 -- NO NEWLINE
$ git log -2 --pretty=tformat:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973
In addition, any unrecognized string that has a % in it is
interpreted as if it has tformat: in front of it. For example,
these two are equivalent:
$ git log -2 --pretty=tformat:%h 4da45bef
$ git log -2 --pretty=%h 4da45bef
LIMITING OUTPUT
If you're only interested in differences in a subset of files, for
example some architecture-specific files, you might do:
git diff-tree -r <tree-ish> <tree-ish> arch/ia64 include/asm-ia64
and it will only show you what changed in those two directories.
Or if you are searching for what changed in just kernel/sched.c, just
do
git diff-tree -r <tree-ish> <tree-ish> kernel/sched.c
and it will ignore all differences to other files.
The pattern is always the prefix, and is matched exactly. There are no
wildcards. Even stricter, it has to match a complete path component.
I.e. "foo" does not pick up foobar.h. "foo" does match foo/bar.h so it
can be used to name subdirectories.
An example of normal usage is:
torvalds@ppc970:~/git> git diff-tree --abbrev 5319e4
:100664 100664 ac348b... a01513... git-fsck-objects.c
which tells you that the last commit changed just one file (it's from
this one:
commit 3c6f7ca19ad4043e9e72fa94106f352897e651a8
tree 5319e4d609cdd282069cc4dce33c1db559539b03
parent b4e628ea30d5ab3606119d2ea5caeab141d38df7
author Linus Torvalds <torvalds AT ppc970.org> Sat Apr 9 12:02:30 2005
committer Linus Torvalds <torvalds AT ppc970.org> Sat Apr 9 12:02:30 2005
Make "git-fsck-objects" print out all the root commits it finds.
Once I do the reference tracking, I'll also make it print out all the
HEAD commits it finds, which is even more interesting.
in case you care).
RAW OUTPUT FORMAT
The raw output format from "git-diff-index", "git-diff-tree",
"git-diff-files" and "git diff --raw" are very similar.
These commands all compare two sets of things; what is compared
differs:
git-diff-index <tree-ish>
compares the <tree-ish> and the files on the filesystem.
git-diff-index --cached <tree-ish>
compares the <tree-ish> and the index.
git-diff-tree [-r] <tree-ish-1> <tree-ish-2> [<pattern>...]
compares the trees named by the two arguments.
git-diff-files [<pattern>...]
compares the index and the files on the filesystem.
The "git-diff-tree" command begins its output by printing the hash of
what is being compared. After that, all the commands print one output
line per changed file.
An output line is formatted this way:
in-place edit :100644 100644 bcd1234... 0123456... M file0
copy-edit :100644 100644 abcd123... 1234567... C68 file1 file2
rename-edit :100644 100644 abcd123... 1234567... R86 file1 file3
create :000000 100644 0000000... 1234567... A file4
delete :100644 000000 1234567... 0000000... D file5
unmerged :000000 000000 0000000... 0000000... U file6
That is, from the left to the right:
1. a colon.
2. mode for "src"; 000000 if creation or unmerged.
3. a space.
4. mode for "dst"; 000000 if deletion or unmerged.
5. a space.
6. sha1 for "src"; 0{40} if creation or unmerged.
7. a space.
8. sha1 for "dst"; 0{40} if creation, unmerged or "look at work tree".
9. a space.
10. status, followed by optional "score" number.
11. a tab or a NUL when -z option is used.
12. path for "src"
13. a tab or a NUL when -z option is used; only exists for C or R.
14. path for "dst"; only exists for C or R.
15. an LF or a NUL when -z option is used, to terminate the record.
Possible status letters are:
o A: addition of a file
o C: copy of a file into a new one
o D: deletion of a file
o M: modification of the contents or mode of a file
o R: renaming of a file
o T: change in the type of the file
o U: file is unmerged (you must complete the merge before it can be
committed)
o X: "unknown" change type (most probably a bug, please report it)
Status letters C and R are always followed by a score (denoting the
percentage of similarity between the source and target of the move or
copy), and are the only ones to be so.
<sha1> is shown as all 0's if a file is new on the filesystem and it is
out of sync with the index.
Example:
:100644 100644 5be4a4...... 000000...... M file.c
When -z option is not used, TAB, LF, and backslash characters in
pathnames are represented as \t, \n, and \\, respectively.
DIFF FORMAT FOR MERGES
"git-diff-tree", "git-diff-files" and "git-diff --raw" can take -c or
--cc option to generate diff output also for merge commits. The output
differs from the format described above in the following way:
1. there is a colon for each parent
2. there are more "src" modes and "src" sha1
3. status is concatenated status characters for each parent
4. no optional "score" number
5. single path, only for "dst"
Example:
::100644 100644 100644 fabadb8... cc95eb0... 4866510... MM describe.c
Note that combined diff lists only files which were modified from all
parents.
GENERATING PATCHES WITH -P
When "git-diff-index", "git-diff-tree", or "git-diff-files" are run
with a -p option, "git diff" without the --raw option, or "git log"
with the "-p" option, they do not produce the output described above;
instead they produce a patch file. You can customize the creation of
such patches via the GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS
environment variables.
What the -p option produces is slightly different from the traditional
diff format:
1. It is preceded with a "git diff" header that looks like this:
diff --git a/file1 b/file2
The a/ and b/ filenames are the same unless rename/copy is
involved. Especially, even for a creation or a deletion, /dev/null
is not used in place of the a/ or b/ filenames.
When rename/copy is involved, file1 and file2 show the name of the
source file of the rename/copy and the name of the file that
rename/copy produces, respectively.
2. It is followed by one or more extended header lines:
old mode <mode>
new mode <mode>
deleted file mode <mode>
new file mode <mode>
copy from <path>
copy to <path>
rename from <path>
rename to <path>
similarity index <number>
dissimilarity index <number>
index <hash>..<hash> <mode>
File modes are printed as 6-digit octal numbers including the file
type and file permission bits.
Path names in extended headers do not include the a/ and b/
prefixes.
The similarity index is the percentage of unchanged lines, and the
dissimilarity index is the percentage of changed lines. It is a
rounded down integer, followed by a percent sign. The similarity
index value of 100% is thus reserved for two equal files, while
100% dissimilarity means that no line from the old file made it
into the new one.
The index line includes the SHA-1 checksum before and after the
change. The <mode> is included if the file mode does not change;
otherwise, separate lines indicate the old and the new mode.
3. TAB, LF, double quote and backslash characters in pathnames are
represented as \t, \n, \" and \\, respectively. If there is need
for such substitution then the whole pathname is put in double
quotes.
4. All the file1 files in the output refer to files before the commit,
and all the file2 files refer to files after the commit. It is
incorrect to apply each change to each file sequentially. For
example, this patch will swap a and b:
diff --git a/a b/b
rename from a
rename to b
diff --git a/b b/a
rename from b
rename to a
COMBINED DIFF FORMAT
Any diff-generating command can take the `-c` or --cc option to produce
a combined diff when showing a merge. This is the default format when
showing merges with git-diff(1) or git-show(1). Note also that you can
give the `-m' option to any of these commands to force generation of
diffs with individual parents of a merge.
A combined diff format looks like this:
diff --combined describe.c
index fabadb8,cc95eb0..4866510
--- a/describe.c
+++ b/describe.c
@@@ -98,20 -98,12 +98,20 @@@
return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
}
- static void describe(char *arg)
-static void describe(struct commit *cmit, int last_one)
++static void describe(char *arg, int last_one)
{
+ unsigned char sha1[20];
+ struct commit *cmit;
struct commit_list *list;
static int initialized = 0;
struct commit_name *n;
+ if (get_sha1(arg, sha1) < 0)
+ usage(describe_usage);
+ cmit = lookup_commit_reference(sha1);
+ if (!cmit)
+ usage(describe_usage);
+
if (!initialized) {
initialized = 1;
for_each_ref(get_name);
1. It is preceded with a "git diff" header, that looks like this (when
-c option is used):
diff --combined file
or like this (when --cc option is used):
diff --cc file
2. It is followed by one or more extended header lines (this example
shows a merge with two parents):
index <hash>,<hash>..<hash>
mode <mode>,<mode>..<mode>
new file mode <mode>
deleted file mode <mode>,<mode>
The mode <mode>,<mode>..<mode> line appears only if at least one of
the <mode> is different from the rest. Extended headers with
information about detected contents movement (renames and copying
detection) are designed to work with diff of two <tree-ish> and are
not used by combined diff format.
3. It is followed by two-line from-file/to-file header
--- a/file
+++ b/file
Similar to two-line header for traditional unified diff format,
/dev/null is used to signal created or deleted files.
4. Chunk header format is modified to prevent people from accidentally
feeding it to patch -p1. Combined diff format was created for
review of merge commit changes, and was not meant for apply. The
change is similar to the change in the extended index header:
@@@ <from-file-range> <from-file-range> <to-file-range> @@@
There are (number of parents + 1) @ characters in the chunk header
for combined diff format.
Unlike the traditional unified diff format, which shows two files A and
B with a single column that has - (minus -- appears in A but removed in
B), + (plus -- missing in A but added to B), or " " (space --
unchanged) prefix, this format compares two or more files file1,
file2,... with one file X, and shows how X differs from each of fileN.
One column for each of fileN is prepended to the output line to note
how X's line is different from it.
A - character in the column N means that the line appears in fileN but
it does not appear in the result. A + character in the column N means
that the line appears in the result, and fileN does not have that line
(in other words, the line was added, from the point of view of that
parent).
In the above example output, the function signature was changed from
both files (hence two - removals from both file1 and file2, plus ++ to
mean one line that was added does not appear in either file1 nor
file2). Also eight other lines are the same from file1 but do not
appear in file2 (hence prefixed with +).
When shown by git diff-tree -c, it compares the parents of a merge
commit with the merge result (i.e. file1..fileN are the parents). When
shown by git diff-files -c, it compares the two unresolved merge
parents with the working tree file (i.e. file1 is stage 2 aka "our
version", file2 is stage 3 aka "their version").
OTHER DIFF FORMATS
The --summary option describes newly added, deleted, renamed and copied
files. The --stat option adds diffstat(1) graph to the output. These
options can be combined with other options, such as -p, and are meant
for human consumption.
When showing a change that involves a rename or a copy, --stat output
formats the pathnames compactly by combining common prefix and suffix
of the pathnames. For example, a change that moves arch/i386/Makefile
to arch/x86/Makefile while modifying 4 lines will be shown like this:
arch/{i386 => x86}/Makefile | 4 +--
The --numstat option gives the diffstat(1) information but is designed
for easier machine consumption. An entry in --numstat output looks like
this:
1 2 README
3 1 arch/{i386 => x86}/Makefile
That is, from left to right:
1. the number of added lines;
2. a tab;
3. the number of deleted lines;
4. a tab;
5. pathname (possibly with rename/copy information);
6. a newline.
When -z output option is in effect, the output is formatted this way:
1 2 README NUL
3 1 NUL arch/i386/Makefile NUL arch/x86/Makefile NUL
That is:
1. the number of added lines;
2. a tab;
3. the number of deleted lines;
4. a tab;
5. a NUL (only exists if renamed/copied);
6. pathname in preimage;
7. a NUL (only exists if renamed/copied);
8. pathname in postimage (only exists if renamed/copied);
9. a NUL.
The extra NUL before the preimage path in renamed case is to allow
scripts that read the output to tell if the current record being read
is a single-path record or a rename/copy record without reading ahead.
After reading added and deleted lines, reading up to NUL would yield
the pathname, but if that is NUL, the record will show two paths.
GIT
Part of the git(1) suite
Git 1.8.3.1 07/30/2024 GIT-DIFF-TREE(1)
Linux-Distributionen
Huschi als Linux-Admin