fdformat(pdf.php) - phpMan

FDFORMAT(8)                  System Administration                 FDFORMAT(8)
NAME
       fdformat - low-level format a floppy disk
SYNOPSIS
       fdformat [options] device
DESCRIPTION
       fdformat  does  a low-level format on a floppy disk.  device is usually
       one of the following (for floppy devices the major = 2, and  the  minor
       is shown for informational purposes only):
              /dev/fd0d360  (minor = 4)
              /dev/fd0h1200 (minor = 8)
              /dev/fd0D360  (minor = 12)
              /dev/fd0H360  (minor = 12)
              /dev/fd0D720  (minor = 16)
              /dev/fd0H720  (minor = 16)
              /dev/fd0h360  (minor = 20)
              /dev/fd0h720  (minor = 24)
              /dev/fd0H1440 (minor = 28)
              /dev/fd1d360  (minor = 5)
              /dev/fd1h1200 (minor = 9)
              /dev/fd1D360  (minor = 13)
              /dev/fd1H360  (minor = 13)
              /dev/fd1D720  (minor = 17)
              /dev/fd1H720  (minor = 17)
              /dev/fd1h360  (minor = 21)
              /dev/fd1h720  (minor = 25)
              /dev/fd1H1440 (minor = 29)
       The  generic  floppy  devices, /dev/fd0 and /dev/fd1, will fail to work
       with fdformat when a non-standard format is being used, or if the  for-
       mat  has  not been autodetected earlier.  In this case, use setfdprm(8)
       to load the disk parameters.
OPTIONS
       -f, --from N
              Start at the track N (default is 0).
       -t, --to N
              Stop at the track N.
       -r, --repair N
              Try to repair tracks  failed  during  the  verification  (max  N
              retries).
       -n, --no-verify
              Skip  the verification that is normally performed after the for-
              matting.
       -V, --version
              Display version information and exit.
       -h, --help
              Display help text and exit.
SEE ALSO
       fd(4), emkfs(8), mkfs(8), setfdprm(8)
AUTHOR
       Werner Almesberger (almesber AT nessie.ch)
AVAILABILITY
       The fdformat command is part of the util-linux package and is available
       from https://www.kernel.org/pub/linux/utils/util-linux/.
util-linux                         July 2014                       FDFORMAT(8)