DNF.CONF(5) DNF DNF.CONF(5)
NAME
dnf.conf - DNF Configuration Reference
DESCRIPTION
DNF by default uses the global configuration file at /etc/dnf/dnf.conf
and all *.repo files found under /etc/yum.repos.d. The latter is typi-
cally used for repository configuration and takes precedence over
global configuration.
The configuration file has INI format consisting of section declaration
and name=value options below each on separate line. There are two types
of sections in the configuration files: main and repository. Main sec-
tion defines all global configuration options and should be only one.
The repository sections define the configuration for each (remote or
local) repository. The section name of the repository in brackets serve
as repo ID reference and should be unique across configuration files.
The allowed characters of repo ID string are lower and upper case
alphabetic letters, digits, -, _, . and :. The minimal repository con-
figuration file should aside from repo ID consists of baseurl, metalink
or mirrorlist option definition.
DISTRIBUTION-SPECIFIC CONFIGURATION
Configuration options, namely best and skip_if_unavailable, can be set
in the DNF configuration file by your distribution to override the DNF
defaults.
[MAIN] OPTIONS
allow_vendor_change
boolean
If disabled dnf will stick to vendor when upgrading or downgrad-
ing rpms. Default is True
WARNING:
This option is currently not supported for downgrade and dis-
tro-sync commands
arch string
The architecture used for installing packages. By default this
is auto-detected. Often used together with ignorearch option.
assumeno
boolean
If enabled dnf will assume No where it would normally prompt for
confirmation from user input. Default is False.
assumeyes
boolean
If enabled dnf will assume Yes where it would normally prompt
for confirmation from user input (see also defaultyes). Default
is False.
autocheck_running_kernel
boolean
Automatic check whether there is installed newer kernel module
with security update than currently running kernel. Default is
True.
basearch
string
The base architecture used for installing packages. By default
this is auto-detected.
best boolean
True instructs the solver to either use a package with the high-
est available version or fail. On False, do not fail if the lat-
est version cannot be installed and go with the lower version.
The default is False. Note this option in particular can be set
in your configuration file by your distribution.
cachedir
string
Path to a directory used by various DNF subsystems for storing
cache data. Has a reasonable root-writable default depending on
the distribution. DNF needs to be able to create files and
directories at this location.
cacheonly
boolean
If set to True DNF will run entirely from system cache, will not
update the cache and will use it even in case it is expired.
Default is False.
API Notes: Must be set before repository objects are created.
Plugins must set this in the pre_config hook. Later changes are
ignored.
check_config_file_age
boolean
Specifies whether dnf should automatically expire metadata of
repos, which are older than their corresponding configuration
file (usually the dnf.conf file and the foo.repo file). Default
is True (perform the check). Expire of metadata is also affected
by metadata age. See also metadata_expire.
clean_requirements_on_remove
boolean
Remove dependencies that are no longer used during dnf remove. A
package only qualifies for removal via clean_require-
ments_on_remove if it was installed through DNF but not on
explicit user request, i.e. it was pulled in as a dependency.
The default is True. (installonlypkgs are never automatically
removed.)
config_file_path
string
Path to the default main configuration file. Default is
/etc/dnf/dnf.conf.
debuglevel
integer
Debug messages output level, in the range 0 to 10. The higher
the number the more debug output is put to stdout. Default is 2.
debug_solver
boolean
Controls whether the libsolv debug files should be created when
solving the transaction. The debug files are created in the
./debugdata directory. Default is False.
defaultyes
boolean
If enabled the default answer to user confirmation prompts will
be Yes. Not to be confused with assumeyes which will not prompt
at all. Default is False.
diskspacecheck
boolean
Controls wheather rpm shoud check available disk space during
the transaction. Default is True.
errorlevel
integer
Error messages output level, in the range 0 to 10. The higher
the number the more error output is put to stderr. Default is 3.
This is deprecated in DNF and overwritten by --verbose command-
line option.
exit_on_lock
boolean
Should the dnf client exit immediately when something else has
the lock. Default is False.
gpgkey_dns_verification
boolean
Should the dnf attempt to automatically verify GPG verification
keys using the DNS system. This option requires the unbound
python module (python3-unbound) to be installed on the client
system. This system has two main features. The first one is to
check if any of the already installed keys have been revoked.
Automatic removal of the key is not yet available, so it is up
to the user, to remove revoked keys from the system. The second
feature is automatic verification of new keys when a repository
is added to the system. In interactive mode, the result is writ-
ten to the output as a suggestion to the user. In non-interac-
tive mode (i.e. when -y is used), this system will automatically
accept keys that are available in the DNS and are correctly
signed using DNSSEC. It will also accept keys that do not exist
in the DNS system and their NON-existence is cryptographically
proven using DNSSEC. This is mainly to preserve backward compat-
ibility. Default is False.
group_package_types
list
List of the following: optional, default, mandatory. Tells dnf
which type of packages in groups will be installed when
'groupinstall' is called. Default is: default, mandatory.
ignorearch
boolean
If set to True, RPM will allow attempts to install packages
incompatible with the CPU's architecture. Defaults to False.
Often used together with arch option.
installonlypkgs
list
List of provide names of packages that should only ever be
installed, never upgraded. Kernels in particular fall into this
category. These packages are never removed by dnf autoremove
even if they were installed as dependencies (see
clean_requirements_on_remove for auto removal details). This
option append the list values to the default installonlypkgs
list used by DNF. The number of kept package versions is regu-
lated by installonly_limit.
installonly_limit
integer
Number of installonly packages allowed to be installed concur-
rently. Defaults to 3. The minimal number of installonly pack-
ages is 2. Value 0 means unlimited number of installonly pack-
ages. Value 1 is explicitely not allowed since it complicates
kernel upgrades due to protection of the running kernel from
removal.
installroot
string
The root of the filesystem for all packaging operations. It
requires an absolute path. See also --installroot commandline
option.
install_weak_deps
boolean
When this option is set to True and a new package is about to be
installed, all packages linked by weak dependency relation (Rec-
ommends or Supplements flags) with this package will be pulled
into the transaction. Default is True.
keepcache
boolean
Keeps downloaded packages in the cache when set to True. Even if
it is set to False and packages have not been installed they
will still persist until next successful transaction. The
default is False.
logdir string
Directory where the log files will be stored. Default is
/var/log.
logfilelevel
integer
Log file messages output level, in the range 0 to 10. The higher
the number the more debug output is put to logs. Default is 9.
This option controls dnf.log, dnf.librepo.log and hawkey.log.
Although dnf.librepo.log and hawkey.log are affected only by
setting the logfilelevel to 10.
log_compress
boolean
When set to True, log files are compressed when they are
rotated. Default is False.
log_rotate
integer
Log files are rotated log_rotate times before being removed. If
log_rotate is 0, the rotation is not performed. Default is 4.
log_size
storage size
Log files are rotated when they grow bigger than log_size
bytes. If log_size is 0, the rotation is not performed. The
default is 1 MB. Valid units are 'k', 'M', 'G'.
The size applies for individual log files, not the sum of all
log files. See also log_rotate.
metadata_timer_sync
time in seconds
The minimal period between two consecutive makecache timer runs.
The command will stop immediately if it's less than this time
period since its last run. Does not affect simple makecache run.
Use 0 to completely disable automatic metadata synchronizing.
The default corresponds to three hours. The value is rounded to
the next commenced hour.
module_obsoletes
boolean
This option controls whether dnf should apply modular obsoletes
when possible.
module_platform_id
string
Set this to $name:$stream to override PLATFORM_ID detected from
/etc/os-release. It is necessary to perform a system upgrade
and switch to a new platform.
module_stream_switch
boolean
This option controls whether it's possible to switch enabled
streams of a module.
multilib_policy
string
Controls how multilib packages are treated during install opera-
tions. Can either be "best" (the default) for the depsolver to
prefer packages which best match the system's architecture, or
"all" to install packages for all available architectures.
obsoletes
boolean
This option only has affect during an install/update. It enables
dnf's obsoletes processing logic, which means it makes dnf check
whether any dependencies of given package are no longer required
and removes them. Useful when doing distribution level
upgrades. Default is 'true'.
Command-line option: --obsoletes
persistdir
string
Directory where DNF stores its persistent data between runs.
Default is "/var/lib/dnf".
pluginconfpath
list
List of directories that are searched for plugin configurations
to load. All configuration files found in these directories,
that are named same as a plugin, are parsed. The default path is
/etc/dnf/plugins.
pluginpath
list
List of directories that are searched for plugins to load. Plug-
ins found in any of the directories in this configuration option
are used. The default contains a Python version-specific path.
plugins
boolean
Controls whether the plugins are enabled. Default is True.
protected_packages
list
List of packages that DNF should never completely remove. They
are protected via Obsoletes as well as user/plugin removals.
The default is: dnf, glob:/etc/yum/protected.d/*.conf and
glob:/etc/dnf/protected.d/*.conf. So any packages which should
be protected can do so by including a file in /etc/dnf/pro-
tected.d with their package name in it.
DNF will protect also the package corresponding to the running
version of the kernel. See also protect_running_kernel option.
protect_running_kernel
boolean
Controls whether the package corresponding to the running ver-
sion of kernel is protected from removal. Default is True.
releasever
string
Used for substitution of $releasever in the repository configu-
ration. See also repo variables.
reposdir
list
DNF searches for repository configuration files in the paths
specified by reposdir. The behavior of reposdir could differ
when it is used along with --installroot option.
rpmverbosity
string
RPM debug scriptlet output level. One of: critical, emergency,
error, warn, info or debug. Default is info.
strict boolean
If disabled, all unavailable packages or packages with broken
dependencies given to DNF command will be skipped without rais-
ing the error causing the whole operation to fail. Currently
works for install command only. The default is True.
tsflags
list
List of strings adding extra flags for the RPM transaction.
+-------------+----------------------------+
|tsflag value | RPM Transaction Flag |
+-------------+----------------------------+
|noscripts | RPMTRANS_FLAG_NOSCRIPTS |
+-------------+----------------------------+
|test | RPMTRANS_FLAG_TEST |
+-------------+----------------------------+
|notriggers | RPMTRANS_FLAG_NOTRIGGERS |
+-------------+----------------------------+
|nodocs | RPMTRANS_FLAG_NODOCS |
+-------------+----------------------------+
|justdb | RPMTRANS_FLAG_JUSTDB |
+-------------+----------------------------+
|nocontexts | RPMTRANS_FLAG_NOCONTEXTS |
+-------------+----------------------------+
|nocaps | RPMTRANS_FLAG_NOCAPS |
+-------------+----------------------------+
|nocrypto | RPMTRANS_FLAG_NOFILEDIGEST |
+-------------+----------------------------+
The nocrypto option will also set the _RPMVSF_NOSIGNATURES and
_RPMVSF_NODIGESTS VS flags. The test option provides a transac-
tion check without performing the transaction. It includes down-
loading of packages, gpg keys check (including permanent import
of additional keys if necessary), and rpm check to prevent file
conflicts. The nocaps is supported with rpm-4.14 or later. When
nocaps is used but rpm doesn't support it, DNF only reports it
as an invalid tsflag.
upgrade_group_objects_upgrade
boolean
Set this to False to disable the automatic running of group
upgrade when running the upgrade command. Default is True (per-
form the operation).
varsdir
list
List of directories where variables definition files are looked
for. Defaults to "/etc/dnf/vars", "/etc/yum/vars". See variable
files in Configuration reference.
zchunk boolean
Enables or disables the use of repository metadata compressed
using the zchunk format (if available). Default is True.
[MAIN] OPTIONS - COLORS
color string
Controls if DNF uses colored output on the command line. Possi-
ble values: "auto", "never", "always". Default is "auto".
color_list_available_downgrade
color
Color of available packages that are older than installed pack-
ages. The option is used during list operations. Default is
magenta.
color_list_available_install
color
Color of packages that are available for installation and none
of their versions in installed. The option is used during list
operations. Default is bold,cyan.
color_list_available_reinstall
color
Color of available packages that are identical to installed ver-
sions and are available for reinstalls. Default is bold,under-
line,green. The option is used during list operations.
color_list_available_upgrade
color
Color of available packages that are newer than installed pack-
ages. Default is bold,blue. The option is used during list
operations.
color_list_installed_extra
color
Color of installed packages that do not have any version among
available packages. The option is used during list operations.
Default is bold,red.
color_list_installed_newer
color
Color of installed packages that are newer than any version
among available packages. The option is used during list opera-
tions. Default is bold,yellow.
color_list_installed_older
color
Color of installed packages that are older than any version
among available packages. The option is used during list opera-
tions. Default is yellow.
color_list_installed_reinstall
color
Color of installed packages that are among available packages
and can be reinstalled. The option is used during list opera-
tions. Default is cyan.
color_search_match
color
Color of patterns matched in search output. Default is
bold,magenta.
color_update_installed
color
Color of removed packages. Default is red. This option is used
during displaying transactions.
color_update_local
color
Color of local packages that are installed from the @commandline
repository. This option is used during displaying transactions.
Default is green.
color_update_remote
color
Color of packages that are installed/upgraded/downgraded from
remote repositories. This option is used during displaying
transactions. Default is bold,green.
REPO OPTIONS
baseurl
list
List of URLs for the repository. Defaults to [].
cost integer
The relative cost of accessing this repository, defaulting to
1000. This value is compared when the priorities of two reposi-
tories are the same. The repository with the lowest cost is
picked. It is useful to make the library prefer on-disk reposi-
tories to remote ones.
enabled
boolean
Include this repository as a package source. The default is
True.
gpgkey list of strings
URLs of a GPG key files that can be used for signing metadata
and packages of this repository, empty by default. If a file can
not be verified using the already imported keys, import of keys
from this option is attempted and the keys are then used for
verification.
metalink
string
URL of a metalink for the repository. Defaults to None.
mirrorlist
string
URL of a mirrorlist for the repository. Defaults to None.
module_hotfixes
boolean
Set this to True to disable module RPM filtering and make all
RPMs from the repository available. The default is False. This
allows user to create a repository with cherry-picked hotfixes
that are included in a package set on a modular system.
name string
A human-readable name of the repository. Defaults to the ID of
the repository.
priority
integer
The priority value of this repository, default is 99. If there
is more than one candidate package for a particular operation,
the one from a repo with the lowest priority value is picked,
possibly despite being less convenient otherwise (e.g. by being
a lower version).
type string
Type of repository metadata. Supported values are: rpm-md.
Aliases for rpm-md: rpm, repomd, rpmmd, yum, YUM.
REPO VARIABLES
Right side of every repo option can be enriched by the following vari-
ables:
$arch
Refers to the system's CPU architecture e.g, aarch64, i586, i686 and
x86_64.
$basearch
Refers to the base architecture of the system. For example, i686 and
i586 machines both have a base architecture of i386, and AMD64 and
Intel64 machines have a base architecture of x86_64.
$releasever
Refers to the release version of operating system which DNF derives
from information available in RPMDB.
In addition to these hard coded variables, user-defined ones can also
be used. They can be defined either via variable files, or by using
special environmental variables. The names of these variables must be
prefixed with DNF_VAR_ and they can only consist of alphanumeric char-
acters and underscores:
$ DNF_VAR_MY_VARIABLE=value
To use such variable in your repository configuration remove the pre-
fix. E.g.:
[myrepo]
baseurl=https://example.site/pub/fedora/$MY_VARIABLE/releases/$releasever
Note that it is not possible to override the arch and basearch vari-
ables using either variable files or environmental variables.
Although users are encouraged to use named variables, the numbered
environmental variables DNF0 - DNF9 are still supported:
$ DNF1=value
[myrepo]
baseurl=https://example.site/pub/fedora/$DNF1/releases/$releasever
OPTIONS FOR BOTH [MAIN] AND REPO
Some options can be applied in either the main section, per repository,
or in a combination. The value provided in the main section is used for
all repositories as the default value, which repositories can then
override in their configuration.
bandwidth
storage size
Total bandwidth available for downloading. Meaningful when used
with the throttle option. Storage size is in bytes by default
but can be specified with a unit of storage. Valid units are
'k', 'M', 'G'.
countme
boolean
Determines whether a special flag should be added to a single,
randomly chosen metalink/mirrorlist query each week. This
allows the repository owner to estimate the number of systems
consuming it, by counting such queries over a week's time, which
is much more accurate than just counting unique IP addresses
(which is subject to both overcounting and undercounting due to
short DHCP leases and NAT, respectively).
The flag is a simple "countme=N" parameter appended to the met-
alink and mirrorlist URL, where N is an integer representing the
"longevity" bucket this system belongs to. The following 4
buckets are defined, based on how many full weeks have passed
since the beginning of the week when this system was installed:
1 = first week, 2 = first month (2-4 weeks), 3 = six months
(5-24 weeks) and 4 = more than six months (> 24 weeks). This
information is meant to help distinguish short-lived installs
from long-term ones, and to gather other statistics about system
lifecycle.
Default is False.
deltarpm
boolean
When enabled, DNF will save bandwidth by downloading much
smaller delta RPM files, rebuilding them to RPM locally. How-
ever, this is quite CPU and I/O intensive. Default is True.
deltarpm_percentage
integer
When the relative size of delta vs pkg is larger than this,
delta is not used. Default value is 75 (Deltas must be at least
25% smaller than the pkg). Use 0 to turn off delta rpm process-
ing. Local repositories (with file:// baseurl) have delta rpms
turned off by default.
enablegroups
boolean
Determines whether DNF will allow the use of package groups for
this repository. Default is True (package groups are allowed).
excludepkgs
list
Exclude packages of this repository, specified by a name or a
glob and separated by a comma, from all operations. Can be dis-
abled using --disableexcludes command line switch. Defaults to
[].
fastestmirror
boolean
If enabled a metric is used to find the fastest available mir-
ror. This overrides the order provided by the mirrorlist/met-
alink file itself. This file is often dynamically generated by
the server to provide the best download speeds and enabling
fastestmirror overrides this. The default is False.
gpgcheck
boolean
Whether to perform GPG signature check on packages found in this
repository. The default is False.
This option can only be used to strengthen the active RPM secu-
rity policy set with the %_pkgverify_level macro (see the
/usr/lib/rpm/macros file for details). That means, if the macro
is set to 'signature' or 'all' and this option is False, it will
be overridden to True during DNF runtime, and a warning will be
printed. To squelch the warning, make sure this option is True
for every enabled repository, and also enable localpkg_gpgcheck.
includepkgs
list
Include packages of this repository, specified by a name or a
glob and separated by a comma, in all operations. Inverse of
excludepkgs, DNF will exclude any package in the repository that
doesn't match this list. This works in conjunction with
excludepkgs and doesn't override it, so if you 'excludep-
kgs=*.i386' and 'includepkgs=python*' then only packages start-
ing with python that do not have an i386 arch will be seen by
DNF in this repo. Can be disabled using --disableexcludes com-
mand line switch. Defaults to [].
ip_resolve
IP address type
Determines how DNF resolves host names. Set this to '4'/'IPv4'
or '6'/'IPv6' to resolve to IPv4 or IPv6 addresses only. By
default, DNF resolves to either addresses.
localpkg_gpgcheck
boolean
Whether to perform a GPG signature check on local packages
(packages in a file, not in a repository). The default is
False. This option is subject to the active RPM security policy
(see gpgcheck for more details).
max_parallel_downloads
integer
Maximum number of simultaneous package downloads. Defaults to 3.
Maximum of 20.
metadata_expire
time in seconds
The period after which the remote repository is checked for
metadata update and in the positive case the local metadata
cache is updated. The default corresponds to 48 hours. Set this
to -1 or never to make the repo never considered expired. Expire
of metadata can be also triggered by change of timestamp of con-
figuration files (dnf.conf, <repo>.repo). See also
check_config_file_age.
minrate
storage size
This sets the low speed threshold in bytes per second. If the
server is sending data at the same or slower speed than this
value for at least timeout option seconds, DNF aborts the con-
nection. The default is 1000. Valid units are 'k', 'M', 'G'.
password
string
The password to use for connecting to a repository with basic
HTTP authentication. Empty by default.
proxy string
URL of a proxy server to connect through. Set to an empty string
in the repository configuration to disable proxy setting inher-
ited from the main section. The expected format of this option
is <scheme>://<ip-or-hostname>[:port]. (For backward compati-
bility, '_none_' can be used instead of the empty string.)
Note: The curl environment variables (such as http_proxy) are
effective if this option is unset (or '_none_' is set in the
repository configuration). See the curl man page for details.
proxy_username
string
The username to use for connecting to the proxy server. Empty by
default.
proxy_password
string
The password to use for connecting to the proxy server. Empty by
default.
proxy_auth_method
string
The authentication method used by the proxy server. Valid values
are
+----------+----------------------------+
|method | meaning |
+----------+----------------------------+
|basic | HTTP Basic authentication |
+----------+----------------------------+
|digest | HTTP Digest authentication |
+----------+----------------------------+
|negotiate | HTTP Negotiate (SPNEGO) |
| | authentication |
+----------+----------------------------+
|ntlm | HTTP NTLM authentication |
+----------+----------------------------+
|digest_ie | HTTP Digest authentication |
| | with an IE flavor |
+----------+----------------------------+
|ntlm_wb | NTLM delegating to winbind |
| | helper |
+----------+----------------------------+
|none | None auth method |
+----------+----------------------------+
|any | All suitable methods |
+----------+----------------------------+
Defaults to any
proxy_sslcacert
string
Path to the file containing the certificate authorities to ver-
ify proxy SSL certificates. Empty by default - uses system
default.
proxy_sslverify
boolean
When enabled, proxy SSL certificates are verified. If the client
can not be authenticated, connecting fails and the repository is
not used any further. If False, SSL connections can be used, but
certificates are not verified. Default is True.
proxy_sslclientcert
string
Path to the SSL client certificate used to connect to proxy
server. Empty by default.
proxy_sslclientkey
string
Path to the SSL client key used to connect to proxy server.
Empty by default.
repo_gpgcheck
boolean
Whether to perform GPG signature check on this repository's
metadata. The default is False. Note that GPG keys for this
check are stored separately from GPG keys used in package signa-
ture verification. Furthermore, they are also stored separately
for each repository.
This means that dnf may ask to import the same key multiple
times. For example, when a key was already imported for package
signature verification and this option is turned on, it may be
needed to import it again for the repository.
retries
integer
Set the number of total retries for downloading packages. The
number is accumulative, so e.g. for retries=10, dnf will fail
after any package download fails for eleventh time. Setting this
to 0 makes dnf try forever. Default is 10.
skip_if_unavailable
boolean
If enabled, DNF will continue running and disable the repository
that couldn't be synchronized for any reason. This option
doesn't affect skipping of unavailable packages after dependency
resolution. To check inaccessibility of repository use it in
combination with refresh command line option. The default is
False. Note this option in particular can be set in your con-
figuration file by your distribution.
sslcacert
string
Path to the file containing the certificate authorities to ver-
ify SSL certificates. Empty by default - uses system default.
sslverify
boolean
When enabled, remote SSL certificates are verified. If the
client can not be authenticated, connecting fails and the repos-
itory is not used any further. If False, SSL connections can be
used, but certificates are not verified. Default is True.
sslverifystatus
boolean
When enabled, revocation status of the server certificate is
verified using the "Certificate Status Request" TLS extension
(aka. OCSP stapling). Default is False.
sslclientcert
string
Path to the SSL client certificate used to connect to remote
sites. Empty by default.
sslclientkey
string
Path to the SSL client key used to connect to remote sites.
Empty by default.
throttle
storage size
Limits the downloading speed. It might be an absolute value or a
percentage, relative to the value of the bandwidth option
option. 0 means no throttling (the default). The absolute value
is in bytes by default but can be specified with a unit of stor-
age. Valid units are 'k', 'M', 'G'.
timeout
time in seconds
Number of seconds to wait for a connection before timing out.
Used in combination with minrate option option. Defaults to 30
seconds.
username
string
The username to use for connecting to repo with basic HTTP
authentication. Empty by default.
user_agent
string
The User-Agent string to include in HTTP requests sent by DNF.
Defaults to
libdnf (NAME VERSION_ID; VARIANT_ID; OS.BASEARCH)
where NAME, VERSION_ID and VARIANT_ID are OS identifiers read
from the os-release(5) file, and OS and BASEARCH are the canoni-
cal OS name and base architecture, respectively. Example:
libdnf (Fedora 31; server; Linux.x86_64)
TYPES OF OPTIONS
boolean
This is a data type with only two possible values.
One of following options can be used: 1, 0, True, False, yes, no
integer
It is a whole number that can be written without a fractional
component.
list It is an option that could represent one or more strings sepa-
rated by space or comma characters.
string It is a sequence of symbols or digits without any whitespace
character.
color A string describing color and modifiers separated with a comma,
for example "red,bold".
o Colors: black, blue, cyan, green, magenta, red, white, yellow
o Modifiers: bold, blink, dim, normal, reverse, underline
FILES
Cache Files
/var/cache/dnf
Main Configuration File
/etc/dnf/dnf.conf
Repository
/etc/yum.repos.d/
Variables
Any properly named file in /etc/dnf/vars is turned into a vari-
able named after the filename (or overrides any of the above
variables but those set from commandline). Filenames may contain
only alphanumeric characters and underscores and be in lower-
case. Variables are also read from /etc/yum/vars for YUM com-
patibility reasons.
SEE ALSO
o dnf(8), DNF Command Reference
AUTHOR
See AUTHORS in DNF source distribution.
COPYRIGHT
2012-2020, Red Hat, Licensed under GPLv2+
4.7.0 Apr 08, 2024 DNF.CONF(5)
Linux-Distributionen
Huschi als Linux-Admin